| /**************************************************************************** |
| * apps/examples/media/media_main.c |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. The |
| * ASF licenses this file to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| * License for the specific language governing permissions and limitations |
| * under the License. |
| * |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <nuttx/config.h> |
| |
| #include <sys/ioctl.h> |
| |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <fcntl.h> |
| #include <errno.h> |
| #include <unistd.h> |
| |
| #include <nuttx/fs/fs.h> |
| #include <nuttx/mtd/mtd.h> |
| |
| /**************************************************************************** |
| * Pre-processor Definitions |
| ****************************************************************************/ |
| |
| #define START_VALUE 0x20 |
| #define END_VALUE 0x7f |
| |
| /**************************************************************************** |
| * Private types |
| ****************************************************************************/ |
| |
| struct media_info_s |
| { |
| off_t blocksize; |
| off_t nblocks; |
| }; |
| |
| /**************************************************************************** |
| * Private Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * get_blocksize |
| ****************************************************************************/ |
| |
| static void get_blocksize(int fd, FAR struct media_info_s *info) |
| { |
| struct mtd_geometry_s mtdgeo; |
| int ret; |
| |
| /* If the underlying driver is an MTD driver, then we should able to get |
| * the erase block size from an MTD ioctl call. |
| */ |
| |
| ret = ioctl(fd, MTDIOC_GEOMETRY, (unsigned long)((uintptr_t)&mtdgeo)); |
| if (ret >= 0) |
| { |
| /* Its an MTD device. Use its geometry */ |
| |
| printf("MTD Geometry:\n"); |
| printf(" blocksize: %u\n", (unsigned int)mtdgeo.blocksize); |
| printf(" erasesize: %lu\n", (unsigned long)mtdgeo.erasesize); |
| printf(" neraseblocks: %lu\n", (unsigned long)mtdgeo.neraseblocks); |
| |
| info->blocksize = mtdgeo.erasesize; |
| info->nblocks = mtdgeo.neraseblocks; |
| |
| /* Attempt to erase the entire MTD device */ |
| |
| ret = ioctl(fd, MTDIOC_BULKERASE, 0); |
| if (ret < 0) |
| { |
| fprintf(stderr, "ERROR: Failed erase the MTD device\n"); |
| } |
| } |
| |
| /* Otherwise, use the configured default. We have no idea of the size |
| * of the media in this case. |
| */ |
| |
| else |
| { |
| info->blocksize = CONFIG_EXAMPLES_MEDIA_BLOCKSIZE; |
| info->nblocks = 0; |
| } |
| } |
| |
| /**************************************************************************** |
| * Public Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * media_main |
| ****************************************************************************/ |
| |
| int main(int argc, FAR char *argv[]) |
| { |
| FAR uint8_t *txbuffer; |
| FAR uint8_t *rxbuffer; |
| FAR char *devpath; |
| struct media_info_s info; |
| ssize_t nwritten; |
| ssize_t nread; |
| off_t blockno; |
| off_t pos; |
| off_t seekpos; |
| off_t i; |
| uint32_t nerrors; |
| uint8_t value; |
| int fd; |
| |
| /* Open the character driver that wraps the media */ |
| |
| if (argc < 2) |
| { |
| devpath = CONFIG_EXAMPLES_MEDIA_DEVPATH; |
| } |
| else |
| { |
| devpath = argv[1]; |
| } |
| |
| fd = open(devpath, O_RDWR); |
| |
| if (fd < 0) |
| { |
| fprintf(stderr, "ERROR: failed to open %s: %d\n", |
| devpath, errno); |
| return 1; |
| } |
| |
| /* Get the block size to use */ |
| |
| get_blocksize(fd, &info); |
| |
| printf("Using:\n"); |
| printf(" blocksize: %ju\n", (uintmax_t)info.blocksize); |
| printf(" nblocks: %ju\n", (uintmax_t)info.nblocks); |
| |
| /* Allocate I/O buffers of the correct block size */ |
| |
| txbuffer = (FAR uint8_t *)malloc((size_t)info.blocksize); |
| if (txbuffer == NULL) |
| { |
| fprintf(stderr, |
| "ERROR: failed to allocate TX I/O buffer of size %ju\n", |
| (uintmax_t)info.blocksize); |
| close(fd); |
| return 1; |
| } |
| |
| rxbuffer = (FAR uint8_t *)malloc((size_t)info.blocksize); |
| if (rxbuffer == NULL) |
| { |
| fprintf(stderr, |
| "ERROR: failed to allocate IRX /O buffer of size %ju\n", |
| (uintmax_t)info.blocksize); |
| free(txbuffer); |
| close(fd); |
| return 1; |
| } |
| |
| /* Write and verify each sector */ |
| |
| pos = 0; |
| nerrors = 0; |
| value = START_VALUE; |
| |
| for (blockno = 0; info.nblocks == 0 || blockno < info.nblocks; blockno++) |
| { |
| printf("Write/Verify: Block %ju\n", (uintmax_t)blockno); |
| |
| /* Fill buffer with a (possibly) unique pattern */ |
| |
| for (i = 0; i < info.blocksize; i++) |
| { |
| txbuffer[i] = value; |
| if (++value >= END_VALUE) |
| { |
| value = START_VALUE; |
| } |
| } |
| |
| seekpos = lseek(fd, pos, SEEK_SET); |
| if (seekpos == (off_t)-1) |
| { |
| int errcode = errno; |
| |
| fprintf(stderr, "ERROR: lseek to %ju failed: %d\n", |
| (uintmax_t)pos, errcode); |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| else if (seekpos != pos) |
| { |
| fprintf(stderr, "ERROR: lseek failed: %ju vs %ju\n", |
| (uintmax_t)seekpos, (uintmax_t) pos); |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| |
| nwritten = write(fd, txbuffer, info.blocksize); |
| if (nwritten < 0) |
| { |
| int errcode = errno; |
| |
| fprintf(stderr, "ERROR: write failed: %d\n", errcode); |
| if (errno != EINTR) |
| { |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| } |
| else if (nwritten != info.blocksize) |
| { |
| fprintf(stderr, "ERROR: Unexpected write size: %zu vs. %ju\n", |
| nwritten, (uintmax_t)info.blocksize); |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| |
| seekpos = lseek(fd, pos, SEEK_SET); |
| if (seekpos == (off_t)-1) |
| { |
| int errcode = errno; |
| |
| fprintf(stderr, "ERROR: lseek to %ju failed: %d\n", |
| (uintmax_t)pos, errcode); |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| else if (seekpos != pos) |
| { |
| fprintf(stderr, "ERROR: lseek failed: %ju vs %ju\n", |
| (uintmax_t)seekpos, (uintmax_t)pos); |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| |
| nread = read(fd, rxbuffer, info.blocksize); |
| if (nread < 0) |
| { |
| int errcode = errno; |
| |
| fprintf(stderr, "ERROR: read failed: %d\n", errcode); |
| if (errno != EINTR) |
| { |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| } |
| else if (nread != info.blocksize) |
| { |
| fprintf(stderr, "ERROR: Unexpected read size: %zu vs. %ju\n", |
| nread, (uintmax_t)info.blocksize); |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| else |
| { |
| for (i = 0; i < info.blocksize && nerrors <= 100; i++) |
| { |
| if (txbuffer[i] != rxbuffer[i]) |
| { |
| fprintf(stderr, |
| "ERROR: block=%ju offset=%ju. " |
| "Unexpected value: %02x vs. %02x\n", |
| (uintmax_t)blockno, (uintmax_t)i, |
| rxbuffer[i], txbuffer[i]); |
| nerrors++; |
| } |
| } |
| |
| if (nerrors > 100) |
| { |
| fprintf(stderr, "ERROR: Too many errors\n"); |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| } |
| |
| pos += info.blocksize; |
| } |
| |
| /* Set the number of blocks if it was unknown before */ |
| |
| if (info.nblocks == 0) |
| { |
| info.nblocks = blockno; |
| } |
| |
| /* Seek to the beginning of the file */ |
| |
| seekpos = lseek(fd, 0, SEEK_SET); |
| if (seekpos == (off_t)-1) |
| { |
| int errcode = errno; |
| |
| fprintf(stderr, "ERROR: lseek to 0 failed: %d\n", errcode); |
| } |
| else if (seekpos != 0) |
| { |
| fprintf(stderr, "ERROR: lseek to 0 failed: %ju\n", |
| (uintmax_t)seekpos); |
| } |
| |
| /* Re-read and verify each sector */ |
| |
| value = START_VALUE; |
| |
| for (blockno = 0; blockno < info.nblocks; blockno++) |
| { |
| printf("Re-read/Verify: Block %ju\n", (uintmax_t)blockno); |
| |
| /* Fill buffer with a (possibly) unique pattern */ |
| |
| for (i = 0; i < info.blocksize; i++) |
| { |
| txbuffer[i] = value; |
| if (++value >= END_VALUE) |
| { |
| value = START_VALUE; |
| } |
| } |
| |
| nread = read(fd, rxbuffer, info.blocksize); |
| if (nread < 0) |
| { |
| int errcode = errno; |
| |
| fprintf(stderr, "ERROR: read failed: %d\n", errcode); |
| if (errno != EINTR) |
| { |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| break; |
| } |
| } |
| else if (nread != info.blocksize) |
| { |
| fprintf(stderr, "ERROR: Unexpected read size: %zu vs. %ju\n", |
| nread, (uintmax_t)info.blocksize); |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| break; |
| } |
| else |
| { |
| for (i = 0; i < info.blocksize && nerrors <= 100; i++) |
| { |
| if (txbuffer[i] != rxbuffer[i]) |
| { |
| fprintf(stderr, |
| "ERROR: block=%ju offset=%ju. " |
| "Unexpected value: %02x vs. %02x\n", |
| (uintmax_t)blockno, (uintmax_t)i, |
| rxbuffer[i], txbuffer[i]); |
| nerrors++; |
| } |
| } |
| |
| if (nerrors > 100) |
| { |
| fprintf(stderr, "ERROR: Too many errors\n"); |
| fprintf(stderr, "ERROR: Aborting at block: %ju\n", |
| (uintmax_t)blockno); |
| info.nblocks = blockno; |
| break; |
| } |
| } |
| } |
| |
| /* Clean-up and exit */ |
| |
| free(rxbuffer); |
| free(txbuffer); |
| close(fd); |
| return 0; |
| } |