harness/apisupport.harness/release/suite.xml

<?xml version="1.0" encoding="UTF-8"?>
<!--

    Licensed to the Apache Software Foundation (ASF) under one
    or more contributor license agreements.  See the NOTICE file
    distributed with this work for additional information
    regarding copyright ownership.  The ASF licenses this file
    to you under the Apache License, Version 2.0 (the
    "License"); you may not use this file except in compliance
    with the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing,
    software distributed under the License is distributed on an
    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied.  See the License for the
    specific language governing permissions and limitations
    under the License.

-->
<project name="suite" basedir=".">

    <import file="jdk.xml"/>
    <condition property="testcoverage.import"
        value="testcoverage-suite.xml" else="no-testcoverage.xml">
        <available file="testcoverage-suite.xml" filepath="${harness.dir}"/>
    </condition>
    <import file="${testcoverage.import}"/>

    <target name="-taskdefs" unless="${harness.taskdefs.done}">
        <dirname property="harness.dir" file="${suite.file}"/>
        <echo level="verbose">Using build harness in ${harness.dir}</echo>
        <taskdef classpath="${harness.dir}/tasks.jar" resource="org/netbeans/nbbuild/taskdefs.properties"/>
        <typedef name="pathfileset" classname="org.netbeans.nbbuild.PathFileSet"
                 classpath="${harness.dir}/tasks.jar"/>
        <typedef name="islocked" classname="org.netbeans.nbbuild.IsLocked" 
                 classpath="${harness.dir}/tasks.jar"/>
        <property name="harness.taskdefs.done" value="true"/>

        <fail message="When using cluster.path property, remove netbeans.dest.dir, enabled.clusters and disabled.clusters properties from platform config, they would be ignored.">
            <condition>
                <and>
                    <isset property="cluster.path.evaluated"/>
                    <or>
                        <isset property="netbeans.dest.dir"/>
                        <isset property="enabled.clusters"/>
                        <isset property="disabled.clusters"/>
                    </or>
                </and>
            </condition>
        </fail>
    </target>
    
    <target name="-init-build-dir">
        <property name="suite.build.dir" location="build"/>
    </target>

    <target name="-convert-old-project" unless="cluster.path.evaluated" depends="-init-build-dir">
        <!-- netbeans.dest.dir -> cluster.path.id translation for pre-7.0 modules -->
        <fail unless="netbeans.dest.dir" message="Either cluster.path/cluster.path.evaluated properties or netbeans.dest.dir must be set."/>

        <pathconvert property="old.project.update.tracking">
            <fileset dir="${netbeans.dest.dir}" includes="**/update_tracking/*.xml"/>
        </pathconvert>

        <property name="enabled.clusters" value=""/>
        <selector id="old.project.included.files">
            <custom classpath="${harness.dir}/tasks.jar" classname="org.netbeans.nbbuild.ModuleSelector">
                <param name="excludeModules" value="${disabled.modules}"/>
                <!-- XXX inc/exc clusters -->
                <param name="includeClusters" value="${enabled.clusters}"/>
                <param name="excludeClusters" value="${disabled.clusters}"/>
                <param name="updateTrackingFiles" value="${old.project.update.tracking}"/>
            </custom>
        </selector>

        <pathconvert property="old.project.clusters.duplicates" pathsep="&#10;">
            <fileset dir="${netbeans.dest.dir}">
                <selector refid="old.project.included.files"/>
            </fileset>
            <chainedmapper>
                <mapper type="regexp" from="(^.+)[/\\]config[/\\]Modules[/\\]" to="\1"/> <!-- #71849 -->
                <filtermapper>
                    <linecontainsregexp negate="true">
                        <regexp pattern="update[/\\]backup[/\\]netbeans[/\\]?$"/>
                    </linecontainsregexp>
                </filtermapper>
            </chainedmapper>
        </pathconvert>
        <tempfile property="old.project.clusters.duplicates.file" destdir="${suite.build.dir}" deleteonexit="true" prefix="duplicates"/>
        <mkdir dir="${suite.build.dir}"/>
        <echo file="${old.project.clusters.duplicates.file}" message="${old.project.clusters.duplicates}"/>

        <pathconvert property="cluster.path.evaluated">
            <union> <!-- union removes duplicates -->
                <files includesfile="${old.project.clusters.duplicates.file}"/>
            </union>
        </pathconvert>
    </target>

    <target name="-init" depends="-taskdefs,-init-build-dir,-convert-old-project">
        <convertclusterpath from="${cluster.path.evaluated}" to="cluster.path.final" id="cluster.path.id"/>
        <property file="nbproject/private/private.properties"/>
        <property file="nbproject/project.properties"/>
        <sortsuitemodules unsortedmodules="${modules}" sortedmodulesproperty="modules.sorted"/>
        <property name="cluster" location="${suite.build.dir}/cluster"/>
        <echo level="verbose">Suite in ${basedir} with clusters ${cluster.path.final}, build cluster ${cluster}, and sorted modules ${modules.sorted}</echo>
        <!-- synchronize with SuiteProject -->
        <property name="disabled.modules" value=""/>
        <property name="enabled.clusters" value=""/>
        <property name="disabled.clusters" value=""/>
        <property name="app.version" value="0.1"/>
        <property name="branding.dir" location="branding"/>
        <property name="dist.dir" location="dist"/>
        <property name="test.xml.results.dir" value="${suite.build.dir}/test/xmldata" />
        <property name="test.report.base.dir" value="${suite.build.dir}/test/report" />
        <property name="test.report.html.dir" value="${test.report.base.dir}/html" />
        <condition property="run.branding"> <!-- #84689 -->
            <and>
                <available file="${branding.dir}" type="dir"/>
                <isset property="branding.token"/>
            </and>
        </condition>
        <condition property="branding.locales.impl" value="${branding.locales}" else="">
            <isset property="branding.locales"/>
        </condition>
    </target>

    <target name="-release.dir">
        <property name="release.dir" location="release"/>
        <condition property="has.release.dir">
            <available file="${release.dir}"/>
        </condition>
    </target>
    <target name="-release.files" depends="-release.dir" if="has.release.dir">
        <pathconvert pathsep="," property="release.files">
            <path>
                <fileset dir="${release.dir}"/>
            </path>
            <filtermapper>
                <replacestring from="${release.dir}${file.separator}" to=""/>
                <replacestring from=" " to="?"/>
            </filtermapper>
        </pathconvert>
    </target>

    <target name="files-init" depends="-release.files">
        <property name="release.files" value=""/>
    </target>
    
    <target name="release" depends="files-init" if="has.release.dir">
        <mkdir dir="${cluster}"/>
        <copy todir="${cluster}">
            <fileset dir="${release.dir}">
                <patternset includes="${release.files}"/>
            </fileset>
        </copy>
    </target>


    <target name="build" depends="-init,branding,release,-hide-excluded-modules" description="Build all modules in the suite.">
        <subant target="netbeans" buildpath="${modules.sorted}" inheritrefs="false" inheritall="false">
            <property name="cluster.path.evaluated" value="${cluster.path.evaluated}"/> <!-- Just for speed of pre-7.0 projects -->
            <property name="harness.taskdefs.done" value="${harness.taskdefs.done}"/> <!-- optimization -->
        </subant>
    </target>

    <target name="-hide-excluded-modules" depends="-init">
        <mkdir dir="${cluster}/config/Modules"/>
        <pathconvert pathsep="," property="disabled.modules.paths.list">
            <pathfileset>
                <path refid="cluster.path.id"/>
                <custom classpath="${harness.dir}/tasks.jar" classname="org.netbeans.nbbuild.ModuleSelector">
                    <param name="excludeModules" value="${disabled.modules}"/>
                    <param name="excluded" value="true"/>
                </custom>
            </pathfileset>
        </pathconvert>
        <createmodulexml xmldir="${cluster}/config/Modules" hidden="${disabled.modules.paths.list}"/>
    </target>

    <target name="nbms" depends="-init,branding,release,-hide-excluded-modules" description="Build NBMs and an Auto Update site descriptor for all modules in the suite.">
        <property name="build.updates.dir" location="${suite.build.dir}/updates"/>
        <!-- reads from suite/project.properties first -->
        <condition property="help.target.cluster" value="${nbm.target.cluster}" >
            <isset property="nbm.target.cluster"/>
        </condition>
        <!-- reads app.name if exists -->
        <pathfileset id="updater.jar">
            <path refid="cluster.path.id"/>
            <filename name="modules/ext/updater.jar"/>
        </pathfileset>
        <condition property="help.target.cluster" value="${app.name}" >
            <and>
                <isset property="app.name"/>
                <!-- #74866: only works for 6.0+ platforms. -->
                <available resource="org/netbeans/updater/resources/autoupdate-info-2_4.dtd">
                    <classpath>
                        <resources refid="updater.jar"/>
                    </classpath>
                </available>
            </and>
        </condition>
        <!-- sets property 'nbm.target.cluster.name' to 'nbm.target.cluster' if helper property set -->
        <condition property="nbm.target.cluster.name" value="nbm.target.cluster" >
            <isset property="help.target.cluster"/>
        </condition>
        <property name="nbm.target.cluster.name" value="" />
        <mkdir dir="${build.updates.dir}"/>
        <subant target="nbm" buildpath="${modules.sorted}" inheritrefs="false" inheritall="false">
            <property name="nbm.target.dir" location="${build.updates.dir}"/>
            <property name="${nbm.target.cluster.name}" value="${help.target.cluster}" />
            <property name="cluster.path.evaluated" value="${cluster.path.evaluated}"/> <!-- Just for speed of pre-7.0 projects -->
            <property name="harness.taskdefs.done" value="${harness.taskdefs.done}"/> <!-- optimization -->
        </subant>

        <condition property="use.license.url.in.catalog" value="true" else="false">
            <available resource="org/netbeans/updater/resources/autoupdate-catalog-2_6.dtd">
                <classpath>
                    <resources refid="updater.jar"/>
                </classpath>
            </available>
        </condition>

        <property name="catalog.base.url" value="."/>
        <makeupdatedesc desc="${build.updates.dir}/updates.xml" distbase="${catalog.base.url}" automaticgrouping="true" uselicenseurl="${use.license.url.in.catalog}">
            <fileset dir="${build.updates.dir}">
                <include name="*.nbm"/>
                <include name="*.jar"/> <!-- #181025: bare OSGi bundles -->
            </fileset>
            <updaterjar>
                <resources refid="updater.jar"/>
            </updaterjar>
        </makeupdatedesc>
    </target>
    
    <target name="build-launchers" depends="-init">
        <fail unless="app.name">Must have set at least an application name ('app.name')</fail>
        
        <pathconvert property="zip.platform.update.tracking">
            <pathfileset>
                <path refid="cluster.path.id"/>
                <filename name="**/update_tracking/*.xml"/>
            </pathfileset>
        </pathconvert>

        <selector id="zip.platform.included.files">
            <custom classpath="${harness.dir}/tasks.jar" classname="org.netbeans.nbbuild.ModuleSelector">
                <param name="excludeModules" value="${disabled.modules}"/>
                <!-- XXX inc/exc clusters -->
                <param name="includeClusters" value="${enabled.clusters}"/>
                <param name="excludeClusters" value="${disabled.clusters}"/>
                <param name="updateTrackingFiles" value="${zip.platform.update.tracking}"/>
            </custom>
        </selector>

        <pathconvert property="zip.platform.clusters.duplicates" pathsep="&#10;">
            <pathfileset>
                <path refid="cluster.path.id"/>
                <selector refid="zip.platform.included.files"/>
            </pathfileset>
            <chainedmapper>
                <mapper type="regexp" from="(^.+)[/\\](config[/\\]Modules|(?&lt;=[/\\]platform\d{0,2}[/\\])(lib|core))[/\\]" to="\1"/> <!-- #71849, #185047, #188601 -->
                <filtermapper>
                    <linecontainsregexp negate="true">
                        <regexp pattern="update[/\\]backup[/\\]netbeans[/\\]?$"/>
                    </linecontainsregexp>
                </filtermapper>
            </chainedmapper>
        </pathconvert>
        <tempfile property="zip.platform.clusters.duplicates.file" destdir="${suite.build.dir}" deleteonexit="true" prefix="duplicates"/>
        <echo file="${zip.platform.clusters.duplicates.file}" message="${zip.platform.clusters.duplicates}"/>

        <union id="zip.platform.clusters"> <!-- union removes duplicates -->
            <files includesfile="${zip.platform.clusters.duplicates.file}"/>
        </union>
        <pathconvert property="zip.platform.clusters.bare" pathsep="&#10;"> <!-- #71128: \n OK on Win but \r\n bad on Unix -->
            <resources refid="zip.platform.clusters"/>
            <chainedmapper>
                <filtermapper>
                    <linecontainsregexp negate="true">
                        <regexp pattern="platform[0-9]*[/\\]?$"/>
                    </linecontainsregexp>
                </filtermapper>
                <mapper type="regexp" from="[/\\]([^/\\]+)([/\\]build[/\\]cluster)?[/\\]?$" to="\1"/> <!-- #71849, #179410 -->
            </chainedmapper>
        </pathconvert>

        <property name="build.launcher.dir" location="${suite.build.dir}/launcher"/>
        
        <mkdir dir="${build.launcher.dir}/etc"/>
        <!-- clean old launchers (platform could be changed) -->
        <delete dir="${build.launcher.dir}/bin" failonerror="false"/>
        <mkdir dir="${build.launcher.dir}/bin"/>

        <!-- make sure correct launchers are present - for pre7 platform use old app.exe launchers -->
        <pathconvert property="nbexec.dll.found" setonempty="false">
            <pathfileset include="lib/nbexec.dll">
                <path refid="cluster.path.id"/>
            </pathfileset>
        </pathconvert>
        <condition property="app.exe.prefix" value="" else="pre7_">
            <isset property="nbexec.dll.found"/>
        </condition>
        <copy file="${harness.dir}/launchers/${app.exe.prefix}app.exe" tofile="${build.launcher.dir}/bin/${app.name}.exe" overwrite="true"/>
        <copy file="${harness.dir}/launchers/${app.exe.prefix}app64.exe" tofile="${build.launcher.dir}/bin/${app.name}64.exe" failonerror="false" overwrite="true"/>
        <copy file="${harness.dir}/launchers/${app.exe.prefix}app_w.exe" tofile="${build.launcher.dir}/bin/${app.name}_w.exe" failonerror="false" overwrite="true"/>

        <copy file="${harness.dir}/launchers/app.sh" tofile="${build.launcher.dir}/bin/${app.name}"/>
        <property name="app.conf" location="${harness.dir}/etc/app.conf"/>
        <copy file="${app.conf}" tofile="${build.launcher.dir}/etc/${app.name}.conf">
            <filterchain>
                <replacestring from="$${branding.token}" to="${branding.token}"/>
            </filterchain>
        </copy>
        <echo message="${app.name}" file="${build.launcher.dir}/etc/${app.name}.clusters"/>
        <echo message="&#10;" file="${build.launcher.dir}/etc/${app.name}.clusters" append="true"/>
        <echo message="${zip.platform.clusters.bare}" file="${build.launcher.dir}/etc/${app.name}.clusters" append="true"/>
        <echo message="&#10;" file="${build.launcher.dir}/etc/${app.name}.clusters" append="true"/>
        
    </target>
    
    <target name="build-zip" depends="build,build-launchers" description="Builds a ZIP distribution of the suite, launchers, and selected modules from the platform.">
        <mkdir dir="${dist.dir}"/>
        <!-- pathfileset does not support 'prefix' and 'filemode' parameters,
             we have to copy them to temp location -->
        <tempfile property="temp.dir.nbexec" destdir="${suite.build.dir}" deleteonexit="true" prefix="nbexec"/>
        <tempfile property="temp.dir.rest" destdir="${suite.build.dir}" deleteonexit="delete" prefix="rest"/>
        <subant genericantfile="${harness.dir}/suite.xml" target="copy-cluster" inheritrefs="true">
            <property name="dest.dir" value="${temp.dir.rest}"/>
            <property name="nbexec.dir" value="${temp.dir.nbexec}"/>
            <property name="build.dir" value="${suite.build.dir}"/>
            <resources refid="zip.platform.clusters"/>
        </subant>
        <zip destfile="${dist.dir}/${app.name}.zip">
            <zipfileset dir="${build.launcher.dir}/bin/" filemode="755" prefix="${app.name}/bin"/>
            <zipfileset dir="${build.launcher.dir}/etc/" prefix="${app.name}/etc"/>
            <zipfileset dir="${temp.dir.nbexec}" filemode="755" prefix="${app.name}"/>
            <zipfileset dir="${temp.dir.rest}" prefix="${app.name}"/>

            <!-- Yes, the doubled app.name is a bit ugly, but better than the alternative; cf. #66441: -->
            <zipfileset dir="${cluster}" prefix="${app.name}/${app.name}">
                <exclude name="config/Modules/*.xml_hidden"/>
            </zipfileset>
            
        </zip>
    </target>

    <target name="copy-cluster" description="Copies cluster specified by basedir to dir ${dest.dir}">
        <pathconvert property="cluster.name">
            <path path="${basedir}"/>
            <mapper type="regexp" from="[/\\]([^/\\]+)([/\\]build[/\\]cluster)?[/\\]?$" to="\1"/>
        </pathconvert>
        <copy todir="${dest.dir}/${cluster.name}">
            <fileset dir="${basedir}">
                <and>
                    <not>
                        <filename name="**/lib/nbexec*"/>
                    </not>
                    <selector refid="zip.platform.included.files"/>
                </and>
            </fileset>
        </copy>
        <touch file="${dest.dir}/${cluster.name}/.lastModified"/>
        <condition property="copy.nbexec" value="true">
            <matches pattern="^platform[0-9]*$" string="${cluster.name}"/>
        </condition>
        <antcall target="copy-nbexec"/>
    </target>

    <target name="copy-nbexec" if="copy.nbexec" description="Copies nbexec from given cluster to specified location">
        <copy todir="${nbexec.dir}/${cluster.name}">
            <fileset dir="${basedir}">
                <filename name="**/lib/nbexec*"/>
            </fileset>
        </copy>
    </target>

    <target name="create-platform" depends="build-zip" description="Creates an unzipped platform from the suite, launchers, and selected modules from the platform.">
        <mkdir dir="${dist.dir}/${app.name}"/>
        <unzip src="${dist.dir}/${app.name}.zip" dest="${dist.dir}/${app.name}">
            <globmapper from="${app.name}/*" to="*"/>
        </unzip>
        <echo level="warning">
Note: As of NetBeans 6.7, you can use the property 'cluster.path' instead of the 'create-platform' target.
See: http://wiki.netbeans.org/DevFaqHowToReuseModules
        </echo>
    </target>
    
    <target name="build-mac" depends="build,build-launchers" description="Builds a ZIP distribution of the suite, launchers, and selected modules from the platform.">
        <mkdir dir="${dist.dir}"/>
        <mkdir dir="${dist.dir}/${app.name}.app"/>
        <mkdir dir="${dist.dir}/${app.name}.app/Contents"/>
        <mkdir dir="${dist.dir}/${app.name}.app/Contents/MacOS"/>
        <mkdir dir="${dist.dir}/${app.name}.app/Contents/Resources"/>
        <property name="app.icon.icns" value="${harness.dir}/etc/applicationIcon.icns"/>
        <copy file="${app.icon.icns}" tofile="${dist.dir}/${app.name}.app/Contents/Resources/${app.name}.icns"/>

        <copy todir="${dist.dir}/${app.name}.app/Contents/Resources/${app.name}/bin">
            <fileset dir="${build.launcher.dir}/bin/" />
        </copy>
        <copy todir="${dist.dir}/${app.name}.app/Contents/Resources/${app.name}/etc">
            <fileset dir="${build.launcher.dir}/etc/" />
        </copy>
        <subant genericantfile="${harness.dir}/suite.xml" target="copy-cluster" inheritrefs="true">
            <property name="dest.dir" value="${dist.dir}/${app.name}.app/Contents/Resources/${app.name}"/>
            <property name="nbexec.dir" value="${dist.dir}/${app.name}.app/Contents/Resources/${app.name}"/>
            <property name="build.dir" value="${suite.build.dir}"/>
            <resources refid="zip.platform.clusters"/>
        </subant>

        <copy todir="${dist.dir}/${app.name}.app/Contents/Resources/${app.name}/${app.name}">
            
            <fileset dir="${cluster}"/>
        </copy>
        
        <copy verbose="true" failonerror="false"
              file="${dist.dir}/${app.name}.app/Contents/Resources/${app.name}/${app.name}/etc/${app.name}.icns" 
              tofile="${dist.dir}/${app.name}.app/Contents/Resources/${app.name}.icns"/>
        
        <delete file="${dist.dir}/${app.name}.app/Contents/MacOS/${app.name}"/>
        <!--TODO: move script to external file-->
        <echo file="${dist.dir}/${app.name}.app/Contents/MacOS/${app.name}">#!/bin/sh
#copied from nbexec
resolve_symlink () {
    file="$$1"
    while [ -h "$$file" ]; do
        ls=`ls -ld "$$file"`
        link=`expr "$$ls" : '^.*-> \(.*\)$' 2>/dev/null`
        if expr "$$link" : '^/' 2> /dev/null >/dev/null; then
            file="$$link"
        else
            file=`dirname "$$1"`"/$$link"
        fi
    done
    echo "$file"
}

absolutize_path () {
    oldpwd=`pwd`
    cd "$$1"
    abspath=`pwd`
    cd "$${oldpwd}"
    echo "$$abspath"
}
PRG="`resolve_symlink "$$0"`"
parentDir="`dirname "$$PRG"`"
parentDir="`absolutize_path "$$parentDir"`"
#resolve the script path
scriptPath="$$parentDir/../Resources/${app.name}/bin"
#run the main executable
sh -- "$$scriptPath/${app.name}" "$$@"
</echo>
        <chmod file="${dist.dir}/${app.name}.app/Contents/MacOS/${app.name}" perm="755"/>
        <chmod file="${dist.dir}/${app.name}.app/Contents/Resources/${app.name}/bin/${app.name}" perm="755"/>
        <chmod dir="${dist.dir}" includes="${app.name}.app/Contents/Resources/${app.name}/platform*/lib/nbexec" perm="755"/>
        
        <copy file="${harness.dir}/etc/Info.plist" tofile="${dist.dir}/${app.name}.app/Contents/Info.plist">
            <filterchain>
                <replacestring from="$${app.name}" to="${app.name}"/>
                <replacestring from="$${app.version}" to="${app.version}"/>
                <replacestring from="$${app.title}" to="${app.title}"/>
                <replacestring from="$${app.icon}" to="master.png"/>
                <replacestring from="$${branding.token}" to="${branding.token}"/>
            </filterchain>
        </copy>
        <!-- zipping in ant doesn't preserve symlinks that seem to be required.
        zip destfile="${dist.dir}/${app.name}-MacOS.zip" basedir="${dist.dir}" includes="${app.name}.app/**" duplicate="preserve"/-->
        <echo>
You MacOS Application bundle was created at ${dist.dir}/${app.name}.app. For final packaging, use hdiutil or other tools to create a .dmg image.
Alternatively use "zip -yr ${app.name}.app" to create a simple zipped distribution.
        </echo>
    </target>

    <target name="-testuserdir-delete-init" depends="-init">
        <property name="test.user.dir" location="${suite.build.dir}/testuserdir"/>
        <property name="test.user.dir.lock" location="${test.user.dir}/lock"/>
        <condition property="app.running">
            <islocked file="${test.user.dir.lock}"/>
        </condition> 
    </target>
    <target name="-testuserdir-delete-ok" depends="-testuserdir-delete-init" unless="app.running">
        <delete dir="${test.user.dir}"/>
    </target>
    <target name="-testuserdir-delete-fail" depends="-testuserdir-delete-init" if="app.running">
        <!-- #66799: best to warn about this condition... -->
        <fail>Will not delete ${test.user.dir} because ${test.user.dir.lock} still exists; kill any running process and delete lock file if necessary</fail>
    </target>
    <target name="testuserdir-delete" depends="-testuserdir-delete-ok,-testuserdir-delete-fail" description="Delete testing user directory (if the application is not running); clears any saved settings etc.">
        <ant antfile="${harness.dir}/jnlp.xml" target="clean"/>
    </target>
    
    <target name="clean" depends="-init,testuserdir-delete" description="Clean everything.">
        <delete failonerror="false" includeemptydirs="true">
            <fileset dir="${suite.build.dir}">
                <exclude name="testuserdir/"/>
            </fileset>
        </delete>
        <subant target="clean" buildpath="${modules.sorted}" inheritrefs="false" inheritall="false">
            <property name="cluster.path.evaluated" value="${cluster.path.evaluated}"/> <!-- Just for speed of pre-7.0 projects -->
            <property name="harness.taskdefs.done" value="${harness.taskdefs.done}"/> <!-- optimization -->
        </subant>
        <delete dir="${dist.dir}"/>
    </target>

    <target name="branding" depends="-init" if="run.branding">
        <mkdir dir="${cluster}"/>
        <branding cluster="${cluster}" overrides="${branding.dir}" token="${branding.token}"  locales="${branding.locales.impl}"/>
    </target>
    
    <target name="run" depends="build,-jdk-init" description="Runs this suite in place.">
        <ant antfile="${harness.dir}/run.xml" target="run">
            <reference refid="cluster.path.id"/>
        </ant>
    </target>
        
    <target name="debug" depends="build,-jdk-init,-jdk-presetdef-nbjpdastart" description="Runs this suite in place in the debugger.">
        <ant antfile="${harness.dir}/run.xml" target="debug">
            <reference refid="cluster.path.id"/>
        </ant>
    </target>

    <target name="profile" depends="build,-jdk-init,-jdk-presetdef-nbprofiledirect" description="Runs this suite in place in the profiler.">
        <ant antfile="${harness.dir}/run.xml" target="profile">
            <reference refid="cluster.path.id"/>
        </ant>
    </target>
    
    <target name="build-jnlp" depends="build,-jdk-init" description="Packages this suite as a JNLP application.">
        <ant antfile="${harness.dir}/jnlp.xml" target="build">
            <reference refid="cluster.path.id"/>
            <property name="jnlp.generate.versions" value="${jnlp.generate.versions}"/>
        </ant>
    </target>
    
    <target name="run-jnlp" depends="build,-jdk-init" description="Runs this suite as a JNLP application.">
        <ant antfile="${harness.dir}/jnlp.xml" target="run">
            <reference refid="cluster.path.id"/>
            <property name="jnlp.generate.versions" value="false"/>  <!-- versioning is not enabled w/o app server-->
        </ant>
    </target>
    
    <target name="debug-jnlp" depends="build,-jdk-init,-jdk-presetdef-nbjpdastart" description="Runs this suite as a JNLP application in the debugger.">
        <ant antfile="${harness.dir}/jnlp.xml" target="debug">
            <reference refid="cluster.path.id"/>
            <property name="jnlp.generate.versions" value="false"/>  <!-- versioning is not enabled w/o app server-->
        </ant>
    </target>

    <target name="build-osgi" depends="build,-jdk-init" description="Converts this suite into OSGi-compatible bundles.">
        <echo>OSGi support is EXPERIMENTAL for now; see: http://wiki.netbeans.org/NetBeansInOSGi</echo>
        <ant antfile="${harness.dir}/osgi.xml" target="build">
            <reference refid="cluster.path.id"/>
        </ant>
    </target>

    <target name="build-osgi-obr" depends="build-osgi" description="Creates an OSGi bundle repository from this suite.">
        <ant antfile="${harness.dir}/osgi.xml" target="obr">
            <reference refid="cluster.path.id"/>
        </ant>
    </target>

    <target name="run-osgi" depends="build-osgi" description="Runs this suite in an OSGi container.">
        <ant antfile="${harness.dir}/osgi.xml" target="run">
            <reference refid="cluster.path.id"/>
        </ant>
    </target>

    <target name="debug-osgi" depends="build-osgi" description="Debugs this suite in an OSGi container.">
        <ant antfile="${harness.dir}/osgi.xml" target="debug">
            <reference refid="cluster.path.id"/>
        </ant>
    </target>

    <target name="profile-osgi" depends="build-osgi" description="Profiles this suite in an OSGi container.">
        <ant antfile="${harness.dir}/osgi.xml" target="profile">
            <reference refid="cluster.path.id"/>
        </ant>
    </target>

    <target name="test" depends="build" description="Runs tests for all modules in the suite.">
        <sortsuitemodules unsortedmodules="${modules}" sortedmodulesproperty="modules.test.sorted" sorttests="true"/>
        <property name="continue.after.failing.tests" value="true"/> <!-- fallback -->
        <subant target="test" buildpath="${modules.test.sorted}" inheritrefs="false" inheritall="false">
            <property name="cluster.path.evaluated" value="${cluster.path.evaluated}"/> <!-- Just for speed of pre-7.0 projects -->
            <property name="harness.taskdefs.done" value="${harness.taskdefs.done}"/> <!-- optimization -->
            <property name="continue.after.failing.tests" value="${continue.after.failing.tests}"/>
        </subant>
    </target>

    <target name="test-generate-html" depends="test" description="Generates test report for entire suite">
        <delete dir="${test.xml.results.dir}" />
        <mkdir dir="${test.xml.results.dir}" />

        <delete dir="${test.report.base.dir}" />
        <mkdir dir="${test.report.base.dir}" />

        <subant target="-copy-testxmlresults" buildpath="${modules.test.sorted}" inheritrefs="false" inheritall="false">
            <property name="test.xml.results.dir" value="${test.xml.results.dir}"/>
        </subant>

        <junitreport todir="${test.report.base.dir}">
            <fileset dir="${test.xml.results.dir}" />
            <report todir="${test.report.html.dir}" format="frames"/>
        </junitreport>
    </target>

    <target name="test-view-html" depends="test-generate-html" description="Generates and displays test report for entire suite">
        <nbbrowse file="${test.report.html.dir}/index.html"/>
    </target>

    <target name="update" depends="-init" description="Updates modules in the suite from an update center.">
        <sortsuitemodules unsortedmodules="${modules}" sortedmodulesproperty="modules.test.sorted"/>
        <subant target="update" buildpath="${modules.test.sorted}" inheritrefs="false" inheritall="false">
            <property name="cluster.path.evaluated" value="${cluster.path.evaluated}"/> <!-- Just for speed of pre-7.0 projects -->
            <property name="harness.taskdefs.done" value="${harness.taskdefs.done}"/> <!-- optimization -->
            <property name="autoupdate.catalog.url" value="${autoupdate.catalog.url}"/>
        </subant>
    </target>

    <target name="display-coverage-report" depends="coverage-report"
        description="Generates and displays test coverage report for entire suite">
        <fail unless="testcoverage.report.dir">
Property testcoverage.report.dir not set. Test coverage script may be missing in ${harness.dir}.
        </fail>
        <nbbrowse file="${testcoverage.report.dir}/index.html"/>
    </target>

    <target 
        name="clusterize" depends="-taskdefs"
        description="Scans a directory for list of NetBeans module JARs or OSGi bundles and generates necessary config files to make that look like NetBeans cluster"
    >
        <fail unless="cluster" message="You have to specify -Dcluster=... as a path to the root of your JAR tree"/>
        <condition property="include.autoload" value="${includes}">
            <!-- for backward compatibility with tutorials -->
            <isset property="includes"/>
        </condition>
        <fail message="You have to specify one of -Dinclude.autoload=... -Dinclude.eager=... -Dinclude.enabled=...">
            <condition>
                <not>
                    <or>
                        <isset property="include.autoload"/>
                        <isset property="include.eager"/>
                        <isset property="include.enabled"/>
                    </or>
                </not>
            </condition>
        </fail>
        <property name="config.dir" location="${cluster}/config/Modules"/>
        <mkdir dir="${config.dir}"/>
        <createmodulexml xmldir="${config.dir}" updatetrackingroot="${cluster}" failonmissingmanifest="false">
            <autoload dir="${cluster}" includes="${include.autoload}"/>
            <eager dir="${cluster}" includes="${include.eager}"/>
            <enabled dir="${cluster}" includes="${include.enabled}"/>
        </createmodulexml>
    </target>
</project>