| /* |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| */ |
| |
| #include <assert.h> |
| #include <string.h> |
| #include "os/mynewt.h" |
| #include "bsp/bsp.h" |
| |
| /* BLE */ |
| #include "nimble/ble.h" |
| #include "host/ble_hs.h" |
| #include "host/util/util.h" |
| |
| /* Mandatory services. */ |
| #include "services/gap/ble_svc_gap.h" |
| #include "services/gatt/ble_svc_gatt.h" |
| |
| /* Application-specified header. */ |
| #include "blecent.h" |
| |
| static int blecent_gap_event(struct ble_gap_event *event, void *arg); |
| |
| /** |
| * Application callback. Called when the read of the ANS Supported New Alert |
| * Category characteristic has completed. |
| */ |
| static int |
| blecent_on_read(uint16_t conn_handle, |
| const struct ble_gatt_error *error, |
| struct ble_gatt_attr *attr, |
| void *arg) |
| { |
| MODLOG_DFLT(INFO, "Read complete; status=%d conn_handle=%d", error->status, |
| conn_handle); |
| if (error->status == 0) { |
| MODLOG_DFLT(INFO, " attr_handle=%d value=", attr->handle); |
| print_mbuf(attr->om); |
| } |
| MODLOG_DFLT(INFO, "\n"); |
| |
| return 0; |
| } |
| |
| /** |
| * Application callback. Called when the write to the ANS Alert Notification |
| * Control Point characteristic has completed. |
| */ |
| static int |
| blecent_on_write(uint16_t conn_handle, |
| const struct ble_gatt_error *error, |
| struct ble_gatt_attr *attr, |
| void *arg) |
| { |
| MODLOG_DFLT(INFO, |
| "Write complete; status=%d conn_handle=%d attr_handle=%d\n", |
| error->status, conn_handle, attr->handle); |
| |
| return 0; |
| } |
| |
| /** |
| * Application callback. Called when the attempt to subscribe to notifications |
| * for the ANS Unread Alert Status characteristic has completed. |
| */ |
| static int |
| blecent_on_subscribe(uint16_t conn_handle, |
| const struct ble_gatt_error *error, |
| struct ble_gatt_attr *attr, |
| void *arg) |
| { |
| MODLOG_DFLT(INFO, "Subscribe complete; status=%d conn_handle=%d " |
| "attr_handle=%d\n", |
| error->status, conn_handle, attr->handle); |
| |
| return 0; |
| } |
| |
| /** |
| * Performs three concurrent GATT operations against the specified peer: |
| * 1. Reads the ANS Supported New Alert Category characteristic. |
| * 2. Writes the ANS Alert Notification Control Point characteristic. |
| * 3. Subscribes to notifications for the ANS Unread Alert Status |
| * characteristic. |
| * |
| * If the peer does not support a required service, characteristic, or |
| * descriptor, then the peer lied when it claimed support for the alert |
| * notification service! When this happens, or if a GATT procedure fails, |
| * this function immediately terminates the connection. |
| */ |
| static void |
| blecent_read_write_subscribe(const struct peer *peer) |
| { |
| const struct peer_chr *chr; |
| const struct peer_dsc *dsc; |
| uint8_t value[2]; |
| int rc; |
| |
| /* Read the supported-new-alert-category characteristic. */ |
| chr = peer_chr_find_uuid(peer, |
| BLE_UUID16_DECLARE(BLECENT_SVC_ALERT_UUID), |
| BLE_UUID16_DECLARE(BLECENT_CHR_SUP_NEW_ALERT_CAT_UUID)); |
| if (chr == NULL) { |
| MODLOG_DFLT(ERROR, "Error: Peer doesn't support the Supported New " |
| "Alert Category characteristic\n"); |
| goto err; |
| } |
| |
| rc = ble_gattc_read(peer->conn_handle, chr->chr.val_handle, |
| blecent_on_read, NULL); |
| if (rc != 0) { |
| MODLOG_DFLT(ERROR, "Error: Failed to read characteristic; rc=%d\n", |
| rc); |
| goto err; |
| } |
| |
| /* Write two bytes (99, 100) to the alert-notification-control-point |
| * characteristic. |
| */ |
| chr = peer_chr_find_uuid(peer, |
| BLE_UUID16_DECLARE(BLECENT_SVC_ALERT_UUID), |
| BLE_UUID16_DECLARE(BLECENT_CHR_ALERT_NOT_CTRL_PT)); |
| if (chr == NULL) { |
| MODLOG_DFLT(ERROR, "Error: Peer doesn't support the Alert " |
| "Notification Control Point characteristic\n"); |
| goto err; |
| } |
| |
| value[0] = 99; |
| value[1] = 100; |
| rc = ble_gattc_write_flat(peer->conn_handle, chr->chr.val_handle, |
| value, sizeof value, blecent_on_write, NULL); |
| if (rc != 0) { |
| MODLOG_DFLT(ERROR, "Error: Failed to write characteristic; rc=%d\n", |
| rc); |
| } |
| |
| /* Subscribe to notifications for the Unread Alert Status characteristic. |
| * A central enables notifications by writing two bytes (1, 0) to the |
| * characteristic's client-characteristic-configuration-descriptor (CCCD). |
| */ |
| dsc = peer_dsc_find_uuid(peer, |
| BLE_UUID16_DECLARE(BLECENT_SVC_ALERT_UUID), |
| BLE_UUID16_DECLARE(BLECENT_CHR_UNR_ALERT_STAT_UUID), |
| BLE_UUID16_DECLARE(BLE_GATT_DSC_CLT_CFG_UUID16)); |
| if (dsc == NULL) { |
| MODLOG_DFLT(ERROR, "Error: Peer lacks a CCCD for the Unread Alert " |
| "Status characteristic\n"); |
| goto err; |
| } |
| |
| value[0] = 1; |
| value[1] = 0; |
| rc = ble_gattc_write_flat(peer->conn_handle, dsc->dsc.handle, |
| value, sizeof value, blecent_on_subscribe, NULL); |
| if (rc != 0) { |
| MODLOG_DFLT(ERROR, "Error: Failed to subscribe to characteristic; " |
| "rc=%d\n", rc); |
| goto err; |
| } |
| |
| return; |
| |
| err: |
| /* Terminate the connection. */ |
| ble_gap_terminate(peer->conn_handle, BLE_ERR_REM_USER_CONN_TERM); |
| } |
| |
| /** |
| * Called when service discovery of the specified peer has completed. |
| */ |
| static void |
| blecent_on_disc_complete(const struct peer *peer, int status, void *arg) |
| { |
| |
| if (status != 0) { |
| /* Service discovery failed. Terminate the connection. */ |
| MODLOG_DFLT(ERROR, "Error: Service discovery failed; status=%d " |
| "conn_handle=%d\n", status, peer->conn_handle); |
| ble_gap_terminate(peer->conn_handle, BLE_ERR_REM_USER_CONN_TERM); |
| return; |
| } |
| |
| /* Service discovery has completed successfully. Now we have a complete |
| * list of services, characteristics, and descriptors that the peer |
| * supports. |
| */ |
| MODLOG_DFLT(ERROR, "Service discovery complete; status=%d " |
| "conn_handle=%d\n", status, peer->conn_handle); |
| |
| /* Now perform three concurrent GATT procedures against the peer: read, |
| * write, and subscribe to notifications. |
| */ |
| blecent_read_write_subscribe(peer); |
| } |
| |
| /** |
| * Initiates the GAP general discovery procedure. |
| */ |
| static void |
| blecent_scan(void) |
| { |
| uint8_t own_addr_type; |
| struct ble_gap_disc_params disc_params; |
| int rc; |
| |
| /* Figure out address to use while advertising (no privacy for now) */ |
| rc = ble_hs_id_infer_auto(0, &own_addr_type); |
| if (rc != 0) { |
| MODLOG_DFLT(ERROR, "error determining address type; rc=%d\n", rc); |
| return; |
| } |
| |
| /* Tell the controller to filter duplicates; we don't want to process |
| * repeated advertisements from the same device. |
| */ |
| disc_params.filter_duplicates = 1; |
| |
| /** |
| * Perform a passive scan. I.e., don't send follow-up scan requests to |
| * each advertiser. |
| */ |
| disc_params.passive = 1; |
| |
| /* Use defaults for the rest of the parameters. */ |
| disc_params.itvl = 0; |
| disc_params.window = 0; |
| disc_params.filter_policy = 0; |
| disc_params.limited = 0; |
| |
| rc = ble_gap_disc(own_addr_type, BLE_HS_FOREVER, &disc_params, |
| blecent_gap_event, NULL); |
| if (rc != 0) { |
| MODLOG_DFLT(ERROR, "Error initiating GAP discovery procedure; rc=%d\n", |
| rc); |
| } |
| } |
| |
| /** |
| * Indicates whether we should tre to connect to the sender of the specified |
| * advertisement. The function returns a positive result if the device |
| * advertises connectability and support for the Alert Notification service. |
| */ |
| static int |
| blecent_should_connect(const struct ble_gap_disc_desc *disc) |
| { |
| struct ble_hs_adv_fields fields; |
| int rc; |
| int i; |
| |
| /* The device has to be advertising connectability. */ |
| if (disc->event_type != BLE_HCI_ADV_RPT_EVTYPE_ADV_IND && |
| disc->event_type != BLE_HCI_ADV_RPT_EVTYPE_DIR_IND) { |
| |
| return 0; |
| } |
| |
| rc = ble_hs_adv_parse_fields(&fields, disc->data, disc->length_data); |
| if (rc != 0) { |
| return rc; |
| } |
| |
| /* The device has to advertise support for the Alert Notification |
| * service (0x1811). |
| */ |
| for (i = 0; i < fields.num_uuids16; i++) { |
| if (ble_uuid_u16(&fields.uuids16[i].u) == BLECENT_SVC_ALERT_UUID) { |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Connects to the sender of the specified advertisement of it looks |
| * interesting. A device is "interesting" if it advertises connectability and |
| * support for the Alert Notification service. |
| */ |
| static void |
| blecent_connect_if_interesting(const struct ble_gap_disc_desc *disc) |
| { |
| uint8_t own_addr_type; |
| int rc; |
| |
| /* Don't do anything if we don't care about this advertiser. */ |
| if (!blecent_should_connect(disc)) { |
| return; |
| } |
| |
| /* Scanning must be stopped before a connection can be initiated. */ |
| rc = ble_gap_disc_cancel(); |
| if (rc != 0) { |
| MODLOG_DFLT(DEBUG, "Failed to cancel scan; rc=%d\n", rc); |
| return; |
| } |
| |
| /* Figure out address to use for connect (no privacy for now) */ |
| rc = ble_hs_id_infer_auto(0, &own_addr_type); |
| if (rc != 0) { |
| MODLOG_DFLT(ERROR, "error determining address type; rc=%d\n", rc); |
| return; |
| } |
| |
| /* Try to connect the the advertiser. Allow 30 seconds (30000 ms) for |
| * timeout. |
| */ |
| rc = ble_gap_connect(own_addr_type, &disc->addr, 30000, NULL, |
| blecent_gap_event, NULL); |
| if (rc != 0) { |
| MODLOG_DFLT(ERROR, "Error: Failed to connect to device; addr_type=%d " |
| "addr=%s\n; rc=%d", |
| disc->addr.type, addr_str(disc->addr.val), rc); |
| return; |
| } |
| } |
| |
| /** |
| * The nimble host executes this callback when a GAP event occurs. The |
| * application associates a GAP event callback with each connection that is |
| * established. blecent uses the same callback for all connections. |
| * |
| * @param event The event being signalled. |
| * @param arg Application-specified argument; unused by |
| * blecent. |
| * |
| * @return 0 if the application successfully handled the |
| * event; nonzero on failure. The semantics |
| * of the return code is specific to the |
| * particular GAP event being signalled. |
| */ |
| static int |
| blecent_gap_event(struct ble_gap_event *event, void *arg) |
| { |
| struct ble_gap_conn_desc desc; |
| struct ble_hs_adv_fields fields; |
| int rc; |
| |
| switch (event->type) { |
| case BLE_GAP_EVENT_DISC: |
| rc = ble_hs_adv_parse_fields(&fields, event->disc.data, |
| event->disc.length_data); |
| if (rc != 0) { |
| return 0; |
| } |
| |
| /* An advertisment report was received during GAP discovery. */ |
| print_adv_fields(&fields); |
| |
| /* Try to connect to the advertiser if it looks interesting. */ |
| blecent_connect_if_interesting(&event->disc); |
| return 0; |
| |
| case BLE_GAP_EVENT_CONNECT: |
| /* A new connection was established or a connection attempt failed. */ |
| if (event->connect.status == 0) { |
| /* Connection successfully established. */ |
| MODLOG_DFLT(INFO, "Connection established "); |
| |
| rc = ble_gap_conn_find(event->connect.conn_handle, &desc); |
| assert(rc == 0); |
| print_conn_desc(&desc); |
| MODLOG_DFLT(INFO, "\n"); |
| |
| /* Remember peer. */ |
| rc = peer_add(event->connect.conn_handle); |
| if (rc != 0) { |
| MODLOG_DFLT(ERROR, "Failed to add peer; rc=%d\n", rc); |
| return 0; |
| } |
| |
| /* Perform service discovery. */ |
| rc = peer_disc_all(event->connect.conn_handle, |
| blecent_on_disc_complete, NULL); |
| if (rc != 0) { |
| MODLOG_DFLT(ERROR, "Failed to discover services; rc=%d\n", rc); |
| return 0; |
| } |
| } else { |
| /* Connection attempt failed; resume scanning. */ |
| MODLOG_DFLT(ERROR, "Error: Connection failed; status=%d\n", |
| event->connect.status); |
| blecent_scan(); |
| } |
| |
| return 0; |
| |
| case BLE_GAP_EVENT_DISCONNECT: |
| /* Connection terminated. */ |
| MODLOG_DFLT(INFO, "disconnect; reason=%d ", event->disconnect.reason); |
| print_conn_desc(&event->disconnect.conn); |
| MODLOG_DFLT(INFO, "\n"); |
| |
| /* Forget about peer. */ |
| peer_delete(event->disconnect.conn.conn_handle); |
| |
| /* Resume scanning. */ |
| blecent_scan(); |
| return 0; |
| |
| case BLE_GAP_EVENT_DISC_COMPLETE: |
| MODLOG_DFLT(INFO, "discovery complete; reason=%d\n", |
| event->disc_complete.reason); |
| return 0; |
| |
| case BLE_GAP_EVENT_ENC_CHANGE: |
| /* Encryption has been enabled or disabled for this connection. */ |
| MODLOG_DFLT(INFO, "encryption change event; status=%d ", |
| event->enc_change.status); |
| rc = ble_gap_conn_find(event->enc_change.conn_handle, &desc); |
| assert(rc == 0); |
| print_conn_desc(&desc); |
| return 0; |
| |
| case BLE_GAP_EVENT_NOTIFY_RX: |
| /* Peer sent us a notification or indication. */ |
| MODLOG_DFLT(INFO, "received %s; conn_handle=%d attr_handle=%d " |
| "attr_len=%d\n", |
| event->notify_rx.indication ? |
| "indication" : |
| "notification", |
| event->notify_rx.conn_handle, |
| event->notify_rx.attr_handle, |
| OS_MBUF_PKTLEN(event->notify_rx.om)); |
| |
| /* Attribute data is contained in event->notify_rx.attr_data. */ |
| return 0; |
| |
| case BLE_GAP_EVENT_MTU: |
| MODLOG_DFLT(INFO, "mtu update event; conn_handle=%d cid=%d mtu=%d\n", |
| event->mtu.conn_handle, |
| event->mtu.channel_id, |
| event->mtu.value); |
| return 0; |
| |
| case BLE_GAP_EVENT_REPEAT_PAIRING: |
| /* We already have a bond with the peer, but it is attempting to |
| * establish a new secure link. This app sacrifices security for |
| * convenience: just throw away the old bond and accept the new link. |
| */ |
| |
| /* Delete the old bond. */ |
| rc = ble_gap_conn_find(event->repeat_pairing.conn_handle, &desc); |
| assert(rc == 0); |
| ble_store_util_delete_peer(&desc.peer_id_addr); |
| |
| /* Return BLE_GAP_REPEAT_PAIRING_RETRY to indicate that the host should |
| * continue with the pairing operation. |
| */ |
| return BLE_GAP_REPEAT_PAIRING_RETRY; |
| |
| default: |
| return 0; |
| } |
| } |
| |
| static void |
| blecent_on_reset(int reason) |
| { |
| MODLOG_DFLT(ERROR, "Resetting state; reason=%d\n", reason); |
| } |
| |
| static void |
| blecent_on_sync(void) |
| { |
| int rc; |
| |
| /* Make sure we have proper identity address set (public preferred) */ |
| rc = ble_hs_util_ensure_addr(0); |
| assert(rc == 0); |
| |
| /* Begin scanning for a peripheral to connect to. */ |
| blecent_scan(); |
| } |
| |
| /** |
| * main |
| * |
| * All application logic and NimBLE host work is performed in default task. |
| * |
| * @return int NOTE: this function should never return! |
| */ |
| int |
| main(void) |
| { |
| int rc; |
| |
| /* Initialize OS */ |
| sysinit(); |
| |
| /* Configure the host. */ |
| ble_hs_cfg.reset_cb = blecent_on_reset; |
| ble_hs_cfg.sync_cb = blecent_on_sync; |
| ble_hs_cfg.store_status_cb = ble_store_util_status_rr; |
| |
| /* Initialize data structures to track connected peers. */ |
| rc = peer_init(MYNEWT_VAL(BLE_MAX_CONNECTIONS), 64, 64, 64); |
| assert(rc == 0); |
| |
| /* Set the default device name. */ |
| rc = ble_svc_gap_device_name_set("nimble-blecent"); |
| assert(rc == 0); |
| |
| /* os start should never return. If it does, this should be an error */ |
| while (1) { |
| os_eventq_run(os_eventq_dflt_get()); |
| } |
| |
| return 0; |
| } |