| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # |
| |
| # Package: apps/blemesh |
| |
| syscfg.defs: |
| BTTESTER_PIPE_UART: |
| description: 'Set communication pipe to UART' |
| value: 1 |
| |
| BTTESTER_PIPE_RTT: |
| description: 'Set communication pipe to RTT' |
| value: 0 |
| |
| BTTESTER_RTT_BUFFER_NAME: |
| description: Bttester rtt pipe buffer name |
| value: '"bttester"' |
| |
| BTTESTER_RTT_BUFFER_SIZE_UP: |
| description: Bttester upstream buffer size |
| value: MYNEWT_VAL(BTTESTER_BTP_DATA_SIZE_MAX) |
| |
| BTTESTER_RTT_BUFFER_SIZE_DOWN: |
| description: Bttester downstream buffer size |
| value: MYNEWT_VAL(BTTESTER_BTP_DATA_SIZE_MAX) |
| |
| BTTESTER_PRIVACY_MODE: |
| description: Enable privacy mode (RPA or NRPA) |
| value: 0 |
| |
| BTTESTER_USE_NRPA: |
| description: Use Non Resolvable Private Address |
| value: 0 |
| |
| BTTESTER_LTD_ADV_TIMEOUT: |
| description: Limited advertising timeout |
| value: 30000 |
| |
| BTTESTER_CONN_RETRY: |
| description: Retry connections when connection failed to be established |
| value: 0 |
| |
| BTTESTER_BTP_DATA_SIZE_MAX: |
| description: Maximum BTP payload |
| value: 2048 |
| |
| BTTESTER_CONN_PARAM_UPDATE: |
| description: Trigger conn param update after connection establish |
| value: 0 |
| |
| BTTESTER_DEBUG: |
| description: Enable debug logging |
| value: 0 |
| |
| BTTESTER_BTP_LOG: |
| description: Enable logging BTP traffic |
| value: 0 |
| |
| BTTESTER_L2CAP_COC_MTU: |
| description: Maximum MTU size the application can handle |
| value: 230 |
| |
| syscfg.vals: |
| OS_MAIN_STACK_SIZE: 512 |
| SHELL_TASK: 0 |
| SHELL_NEWTMGR: 0 |
| LOG_LEVEL: 12 |
| MSYS_1_BLOCK_COUNT: 48 |
| |
| BLE_MONITOR_RTT: 1 |
| CONSOLE_RTT: 0 |
| CONSOLE_UART: 0 |
| RTT_NUM_BUFFERS_UP: 0 |
| RTT_NUM_BUFFERS_DOWN: 0 |
| |
| BLE_L2CAP_COC_MAX_NUM: 2 |
| BLE_L2CAP_SIG_MAX_PROCS: 2 |
| BLE_L2CAP_ENHANCED_COC: 1 |
| BLE_VERSION: 52 |
| # Some testcases require MPS < MTU |
| BLE_L2CAP_COC_MPS: 100 |
| BLE_RPA_TIMEOUT: 30 |
| BLE_SM_BONDING: 1 |
| BLE_SM_MITM: 0 |
| BLE_SM_SC: 1 |
| BLE_SM_OUR_KEY_DIST: 7 |
| BLE_SM_THEIR_KEY_DIST: 7 |
| BLE_SVC_GAP_CENTRAL_ADDRESS_RESOLUTION: 1 |
| BLE_SVC_GAP_PPCP_MIN_CONN_INTERVAL: 9 |
| BLE_SVC_GAP_PPCP_MAX_CONN_INTERVAL: 30 |
| BLE_SVC_GAP_PPCP_SUPERVISION_TMO: 2000 |
| BLE_SVC_GAP_APPEARANCE_WRITE_PERM: 0 |
| BLE_SVC_GAP_DEVICE_NAME_WRITE_PERM: 0 |
| BLE_STORE_CONFIG_PERSIST: 0 |
| |
| BLE_MESH: 1 |
| BLE_MESH_SHELL: 0 |
| BLE_MESH_PROV: 1 |
| BLE_MESH_RELAY: 1 |
| BLE_MESH_PB_ADV: 1 |
| BLE_MESH_PB_GATT: 1 |
| BLE_MESH_LOW_POWER: 1 |
| BLE_MESH_LPN_AUTO: 0 |
| BLE_MESH_GATT_PROXY: 1 |
| BLE_MESH_LABEL_COUNT: 2 |
| BLE_MESH_SUBNET_COUNT: 2 |
| BLE_MESH_MODEL_GROUP_COUNT: 2 |
| BLE_MESH_APP_KEY_COUNT: 4 |
| BLE_MESH_IV_UPDATE_TEST: 1 |
| BLE_MESH_TESTING: 1 |
| BLE_MESH_FRIEND: 1 |
| BLE_MESH_CFG_CLI: 1 |
| BLE_MESH_RX_SDU_MAX: 110 |
| BLE_MESH_HEALTH_CLI: 1 |
| BLE_MESH_FRIEND_QUEUE_SIZE: 32 |
| BLE_MESH_RX_SEG_MAX: 13 |
| BLE_MESH_TX_SEG_MSG_COUNT: 2 |
| |
| BLE_MESH_ADV_BUF_COUNT: 20 |
| BLE_MESH_TX_SEG_MAX: 6 |
