| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # |
| |
| syscfg.defs: |
| # Supported GAP roles. By default, all four roles are enabled. |
| BLE_ROLE_CENTRAL: |
| description: 'Enables the Central bluetooth role. (0/1)' |
| value: 1 |
| BLE_ROLE_PERIPHERAL: |
| description: 'Enables the Peripheral bluetooth role. (0/1)' |
| value: 1 |
| BLE_ROLE_BROADCASTER: |
| description: 'Enables the Broadcaster bluetooth role. (0/1)' |
| value: 1 |
| BLE_ROLE_OBSERVER: |
| description: 'Enables the Observer bluetooth role. (0/1)' |
| value: 1 |
| |
| BLE_MAX_CONNECTIONS: |
| description: 'The maximum number of concurrent connections.' |
| value: 1 |
| BLE_MAX_PERIODIC_SYNCS: |
| description: > |
| The maximum number of concurrent periodic syncs that can |
| be created |
| value: 1 |
| BLE_WHITELIST: |
| description: > |
| Enables the BLE whitelist for controlling who to connect to or |
| accept a connection from. (0/1) |
| value: 1 |
| BLE_MULTI_ADV_INSTANCES: |
| description: > |
| This is the number of multi-advertising instances. This is NOT the |
| total number of advertising instances. The total number of |
| advertising instances is this number plus 1 (assuming the device |
| supports advertising). |
| value: 0 |
| BLE_EXT_ADV: |
| description: > |
| This enables extended advertising feature. |
| value: 0 |
| BLE_PERIODIC_ADV: |
| description: > |
| This enables periodic advertising feature. |
| value: 0 |
| restrictions: |
| - 'BLE_EXT_ADV if 1' |
| BLE_PERIODIC_ADV_SYNC_TRANSFER: |
| description: > |
| This enables Periodic Advertising Sync Transfer Feature. |
| value: 0 |
| restrictions: |
| - 'BLE_PERIODIC_ADV if 1' |
| - '(BLE_ROLE_CENTRAL || BLE_ROLE_PERIPHERAL) if 1' |
| BLE_PERIODIC_ADV_SYNC_BIGINFO_REPORTS: |
| description: > |
| This enables BIGInfo reports. |
| value: 0 |
| restrictions: |
| - 'BLE_PERIODIC_ADV if 1' |
| - '(BLE_VERSION >= 52) if 1' |
| experimental: 1 |
| BLE_EXT_ADV_MAX_SIZE: |
| description: > |
| This allows to configure maximum size of advertising data and |
| scan response data used in LE Advertising Extensions. |
| Valid range 31-1650. |
| value: 31 |
| BLE_VERSION: |
| description: > |
| This allows to configure supported Bluetooth Core version. Some |
| features may not be available if version is too low. Version is |
| integer for easy comparison. |
| range: 50, 51, 52, 53, 54 |
| value: 50 |
| BLE_ISO: |
| description: > |
| This enables LE Isochronous Channels as per Bluetooth v5.2 |
| value: 0 |
| restrictions: |
| - '(BLE_VERSION >= 52) if 1' |
| BLE_ISO_BROADCAST_SOURCE: |
| description: > |
| This enables LE Audio Broadcast Source feature |
| value: 0 |
| restrictions: |
| - '(BLE_VERSION >= 52) if 1' |
| BLE_ISO_BROADCAST_SINK: |
| description: > |
| This enables LE Audio Broadcast Sink feature |
| value: 0 |
| restrictions: |
| - '(BLE_VERSION >= 52) if 1' |
| BLE_ISO_TEST: |
| description: > |
| Enables BLE ISO Testing commands |
| value: 0 |
| restrictions: |
| - 'BLE_ISO if 1' |
| |
| BLE_HCI_VS: |
| description: > |
| Enables support for NimBLE specific vendor HCI commands |
| value: 0 |
| |
| BLE_HCI_VS_OCF_OFFSET: |
| description: > |
| This defines starting offset for NimBLE specific vendor HCI commands. |
| Purpose of this is to improve compatibility with other custom |
| implementations. |
| value: 0 |
| |
| BLE_POWER_CONTROL: |
| description: > |
| This enabled LE Power Control feature |
| value: 0 |
| |
| BLE_CONN_SUBRATING: |
| description: > |
| This enables LE Connection Subrating feature |
| value: 0 |
| |
| BLE_PHY_2M: |
| description: > |
| This enables support for addtitional 2M PHY |
| value: 0 |
| restrictions: |
| - 'BLE_PHY if 1' |
| |
| BLE_PHY_CODED: |
| description: > |
| This enables support for addtitional CODED PHY |
| value: 0 |
| restrictions: |
| - 'BLE_PHY if 1' |
| |
| syscfg.defs.'BLE_PHY_2M || BLE_PHY_CODED': |
| BLE_PHY: 1 |
| |
| # Allow periodic sync transfer only if 5.1 or higher |
| syscfg.restrictions: |
| - "'BLE_PERIODIC_ADV_SYNC_TRANSFER == 0' || 'BLE_VERSION >= 51'" |
| |
| # Enable VS HCI by default for combined or standalone controller build |
| syscfg.vals.BLE_CONTROLLER: |
| BLE_HCI_VS: 1 |