| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| |
| syscfg.defs.TINYUSB: |
| USBD_STRING_DESCRIPTOR_MAX_LENGTH: |
| description: Maximum length of string descriptor in characters |
| value: 31 |
| USBD_EP0_SIZE: |
| description: > |
| Endpoint 0 size |
| value: 64 |
| USBD_SERIAL_ID: |
| description: Serial ID |
| value: 1 |
| restrictions: |
| - $notnull |
| USBD_VID: |
| description: Vendor ID |
| value: |
| restrictions: |
| - $notnull |
| USBD_PID: |
| description: Product ID |
| value: |
| restrictions: |
| - $notnull |
| USBD_PRODUCT_RELEASE_NUMBER: |
| description: Product release number needed for USB descriptor |
| value: 0x100 |
| USBD_CONFIGURATION_MAX_POWER: |
| description: > |
| Maximum power consumption of the USB device from the bus in this specific |
| configuration when the device is fully operational. Expressed in 2 mA units |
| (i.e., 50 = 100 mA). |
| value: 100 |
| USBD_LANGID: |
| description: Language ID as specified by usb.org |
| value: 0x0409 |
| USBD_VENDOR_STRING: |
| description: Manufacturer identification string |
| value: '"Apache Software Foundation"' |
| USBD_PRODUCT_STRING: |
| description: Device friendly name |
| value: '"NimBLE Auracast"' |
| USBD_CDC: |
| description: Enable CDC device |
| value: 0 |
| USBD_CDC_CONSOLE: |
| description: Enable CDC device function for console in TinyUSB stack. |
| value: |
| USBD_HID: |
| description: Enable HID device |
| value: 0 |
| USBD_MSC: |
| description: Enable MSC device |
| value: 0 |
| USBD_BTH: |
| description: Enable BT HCI device |
| value: 0 |
| USBD_AUDIO: |
| description: Enable Audio device |
| value: 0 |
| USBD_AUDIO_IN: |
| description: Enable Audio device |
| value: 0 |
| USBD_AUDIO_OUT: |
| description: Enable Audio device |
| value: 1 |
| USBD_AUDIO_IN_OUT: |
| description: Enable Audio device |
| value: 0 |
| USB_AUDIO_OUT_CHANNELS: |
| description: Number of audio channels on USB stream |
| value: MYNEWT_VAL(AURACAST_CHAN_NUM) |
| USB_AUDIO_OUT_SAMPLE_RATE: |
| description: USB sample rate |
| value: 48000 |
| |
| USBD_CDC_DATA_OUT_EP: |
| description: CDC data out endpoint number |
| value: |
| USBD_CDC_DATA_IN_EP: |
| description: CDC data out endpoint number |
| value: |
| USBD_CDC_DATA_EP_SIZE: |
| description: CDC data endpoint size |
| value: |
| USBD_CDC_NOTIFY_EP: |
| description: CDC notify endpoint number |
| value: |
| USBD_CDC_NOTIFY_EP_SIZE: |
| description: CDC notify endpoint size |
| value: |
| |
| USBD_CDC_DESCRIPTOR_STRING: |
| description: String for CDC interface |
| value: NULL |
| |
| USBD_MSC_DESCRIPTOR_STRING: |
| description: String for MSC interface |
| value: NULL |
| |
| USBD_HID_DESCRIPTOR_STRING: |
| description: String for HID interface |
| value: NULL |
| |
| USBD_BTH_DESCRIPTOR_STRING: |
| description: String for BT descriptor |
| value: NULL |
| |
| USBD_HID_REPORT_EP: |
| description: HID report endpoint number |
| value: |
| USBD_HID_REPORT_EP_SIZE: |
| description: HID report endpoint size |
| value: |
| USBD_HID_REPORT_EP_INTERVAL: |
| description: HID report endpoint interval |
| value: |
| |
| USBD_HID_REPORT_ID_KEYBOARD: |
| description: HID keyboard report ID |
| value: |
| USBD_HID_CAPS_LOCK_LED_PIN: |
| description: Caps Lock LED |
| value: -1 |
| USBD_HID_CAPS_LOCK_LED_ON_VALUE: |
| description: Value to set to pin to turn led on |
| value: 0 |
| USBD_HID_NUM_LOCK_LED_PIN: |
| description: Num Lock LED |
| value: -1 |
| USBD_HID_NUM_LOCK_LED_ON_VALUE: |
| description: Value to set to pin to turn led on |
| value: 0 |
| USBD_HID_REPORT_ID_MOUSE: |
| description: HID keyboard report ID |
| value: |
| |
| USBD_BTH_EVENT_EP: |
| description: BTH event endpoint number |
| value: |
| USBD_BTH_EVENT_EP_SIZE: |
| description: BTH event endpoint size |
| value: |
| USBD_BTH_EVENT_EP_INTERVAL: |
| description: BTH event endpoint interval |
| value: |
| USBD_BTH_DATA_IN_EP: |
| description: BTH data in endpoint number |
| value: |
| USBD_BTH_DATA_OUT_EP: |
| description: BTH data out endpoint number |
| value: |
| USBD_BTH_DATA_EP_SIZE: |
| description: BTH data endpoints size |
| value: |
| |
| syscfg.restrictions: |
| - '!USBD_STD_DESCRIPTORS' |