/** | |
****************************************************************************** | |
* @file stm32l4xx_hal_conf.h | |
* @author MCD Application Team | |
* @brief HAL configuration template file. | |
* This file should be copied to the application folder and renamed | |
* to stm32l4xx_hal_conf.h. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32L4xx_HAL_CONF_H | |
#define __STM32L4xx_HAL_CONF_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Exported types ------------------------------------------------------------*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/* ########################## Module Selection ############################## */ | |
/** | |
* @brief This is the list of modules to be used in the HAL driver | |
*/ | |
#define HAL_MODULE_ENABLED | |
#define HAL_ADC_MODULE_ENABLED | |
#define HAL_CAN_MODULE_ENABLED | |
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ | |
#define HAL_COMP_MODULE_ENABLED | |
#define HAL_CORTEX_MODULE_ENABLED | |
#define HAL_CRC_MODULE_ENABLED | |
#define HAL_CRYP_MODULE_ENABLED | |
#define HAL_DAC_MODULE_ENABLED | |
#define HAL_DCMI_MODULE_ENABLED | |
#define HAL_DFSDM_MODULE_ENABLED | |
#define HAL_DMA_MODULE_ENABLED | |
#define HAL_DMA2D_MODULE_ENABLED | |
#define HAL_DSI_MODULE_ENABLED | |
#define HAL_FIREWALL_MODULE_ENABLED | |
#define HAL_FLASH_MODULE_ENABLED | |
#define HAL_GFXMMU_MODULE_ENABLED | |
#define HAL_HASH_MODULE_ENABLED | |
#define HAL_HCD_MODULE_ENABLED | |
#define HAL_NAND_MODULE_ENABLED | |
#define HAL_NOR_MODULE_ENABLED | |
#define HAL_SRAM_MODULE_ENABLED | |
#define HAL_GPIO_MODULE_ENABLED | |
#define HAL_I2C_MODULE_ENABLED | |
#define HAL_IRDA_MODULE_ENABLED | |
#define HAL_IWDG_MODULE_ENABLED | |
#define HAL_LCD_MODULE_ENABLED | |
#define HAL_LPTIM_MODULE_ENABLED | |
#define HAL_LTDC_MODULE_ENABLED | |
#define HAL_OPAMP_MODULE_ENABLED | |
#define HAL_OSPI_MODULE_ENABLED | |
#define HAL_PCD_MODULE_ENABLED | |
#define HAL_PWR_MODULE_ENABLED | |
#define HAL_QSPI_MODULE_ENABLED | |
#define HAL_RCC_MODULE_ENABLED | |
#define HAL_RNG_MODULE_ENABLED | |
#define HAL_RTC_MODULE_ENABLED | |
#define HAL_SAI_MODULE_ENABLED | |
#define HAL_SD_MODULE_ENABLED | |
#define HAL_SMARTCARD_MODULE_ENABLED | |
#define HAL_SMBUS_MODULE_ENABLED | |
#define HAL_SPI_MODULE_ENABLED | |
#define HAL_SWPMI_MODULE_ENABLED | |
#define HAL_TIM_MODULE_ENABLED | |
#define HAL_TSC_MODULE_ENABLED | |
#define HAL_UART_MODULE_ENABLED | |
#define HAL_USART_MODULE_ENABLED | |
#define HAL_WWDG_MODULE_ENABLED | |
/* ########################## Oscillator Values adaptation ####################*/ | |
/** | |
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application. | |
* This value is used by the RCC HAL module to compute the system frequency | |
* (when HSE is used as system clock source, directly or through the PLL). | |
*/ | |
#if !defined (HSE_VALUE) | |
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ | |
#endif /* HSE_VALUE */ | |
#if !defined (HSE_STARTUP_TIMEOUT) | |
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ | |
#endif /* HSE_STARTUP_TIMEOUT */ | |
/** | |
* @brief Internal Multiple Speed oscillator (MSI) default value. | |
* This value is the default MSI range value after Reset. | |
*/ | |
#if !defined (MSI_VALUE) | |
#define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ | |
#endif /* MSI_VALUE */ | |
/** | |
* @brief Internal High Speed oscillator (HSI) value. | |
* This value is used by the RCC HAL module to compute the system frequency | |
* (when HSI is used as system clock source, directly or through the PLL). | |
*/ | |
#if !defined (HSI_VALUE) | |
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ | |
#endif /* HSI_VALUE */ | |
/** | |
* @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. | |
* This internal oscillator is mainly dedicated to provide a high precision clock to | |
* the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. | |
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency | |
* which is subject to manufacturing process variations. | |
*/ | |
#if !defined (HSI48_VALUE) | |
#define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. | |
The real value my vary depending on manufacturing process variations.*/ | |
#endif /* HSI48_VALUE */ | |
/** | |
* @brief Internal Low Speed oscillator (LSI) value. | |
*/ | |
#if !defined (LSI_VALUE) | |
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ | |
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz | |
The real value may vary depending on the variations | |
in voltage and temperature.*/ | |
/** | |
* @brief External Low Speed oscillator (LSE) value. | |
* This value is used by the UART, RTC HAL module to compute the system frequency | |
*/ | |
#if !defined (LSE_VALUE) | |
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ | |
#endif /* LSE_VALUE */ | |
#if !defined (LSE_STARTUP_TIMEOUT) | |
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ | |
#endif /* HSE_STARTUP_TIMEOUT */ | |
/** | |
* @brief External clock source for SAI1 peripheral | |
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source | |
* frequency. | |
*/ | |
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) | |
#define EXTERNAL_SAI1_CLOCK_VALUE 48000U /*!< Value of the SAI1 External clock source in Hz*/ | |
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ | |
/** | |
* @brief External clock source for SAI2 peripheral | |
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source | |
* frequency. | |
*/ | |
#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) | |
#define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/ | |
#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ | |
/* Tip: To avoid modifying this file each time you need to use different HSE, | |
=== you can define the HSE value in your toolchain compiler preprocessor. */ | |
/* ########################### System Configuration ######################### */ | |
/** | |
* @brief This is the HAL system configuration section | |
*/ | |
#define VDD_VALUE 3300U /*!< Value of VDD in mv */ | |
#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ | |
#define USE_RTOS 0U | |
#define PREFETCH_ENABLE 0U | |
#define INSTRUCTION_CACHE_ENABLE 1U | |
#define DATA_CACHE_ENABLE 1U | |
/* ########################## Assert Selection ############################## */ | |
/** | |
* @brief Uncomment the line below to expanse the "assert_param" macro in the | |
* HAL drivers code | |
*/ | |
/* #define USE_FULL_ASSERT 1U */ | |
/* ################## Register callback feature configuration ############### */ | |
/** | |
* @brief Set below the peripheral configuration to "1U" to add the support | |
* of HAL callback registration/deregistration feature for the HAL | |
* driver(s). This allows user application to provide specific callback | |
* functions thanks to HAL_PPP_RegisterCallback() rather than overwriting | |
* the default weak callback functions (see each stm32l4xx_hal_ppp.h file | |
* for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef | |
* for each PPP peripheral). | |
*/ | |
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U | |
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U | |
#define USE_HAL_COMP_REGISTER_CALLBACKS 0U | |
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U | |
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U | |
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U | |
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U | |
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U | |
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U | |
#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U | |
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U | |
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U | |
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U | |
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U | |
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U | |
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U | |
#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U | |
#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U | |
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U | |
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U | |
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U | |
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U | |
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U | |
#define USE_HAL_SD_REGISTER_CALLBACKS 0U | |
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U | |
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U | |
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U | |
#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U | |
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U | |
#define USE_HAL_TSC_REGISTER_CALLBACKS 0U | |
#define USE_HAL_UART_REGISTER_CALLBACKS 0U | |
#define USE_HAL_USART_REGISTER_CALLBACKS 0U | |
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U | |
/* ################## SPI peripheral configuration ########################## */ | |
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver | |
* Activated: CRC code is present inside driver | |
* Deactivated: CRC code cleaned from driver | |
*/ | |
#define USE_SPI_CRC 1U | |
/* Includes ------------------------------------------------------------------*/ | |
/** | |
* @brief Include module's header file | |
*/ | |
#ifdef HAL_RCC_MODULE_ENABLED | |
#include "stm32l4xx_hal_rcc.h" | |
#endif /* HAL_RCC_MODULE_ENABLED */ | |
#ifdef HAL_GPIO_MODULE_ENABLED | |
#include "stm32l4xx_hal_gpio.h" | |
#endif /* HAL_GPIO_MODULE_ENABLED */ | |
#ifdef HAL_DMA_MODULE_ENABLED | |
#include "stm32l4xx_hal_dma.h" | |
#endif /* HAL_DMA_MODULE_ENABLED */ | |
#ifdef HAL_DFSDM_MODULE_ENABLED | |
#include "stm32l4xx_hal_dfsdm.h" | |
#endif /* HAL_DFSDM_MODULE_ENABLED */ | |
#ifdef HAL_CORTEX_MODULE_ENABLED | |
#include "stm32l4xx_hal_cortex.h" | |
#endif /* HAL_CORTEX_MODULE_ENABLED */ | |
#ifdef HAL_ADC_MODULE_ENABLED | |
#include "stm32l4xx_hal_adc.h" | |
#endif /* HAL_ADC_MODULE_ENABLED */ | |
#ifdef HAL_CAN_MODULE_ENABLED | |
#include "stm32l4xx_hal_can.h" | |
#endif /* HAL_CAN_MODULE_ENABLED */ | |
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED | |
#include "Legacy/stm32l4xx_hal_can_legacy.h" | |
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ | |
#ifdef HAL_COMP_MODULE_ENABLED | |
#include "stm32l4xx_hal_comp.h" | |
#endif /* HAL_COMP_MODULE_ENABLED */ | |
#ifdef HAL_CRC_MODULE_ENABLED | |
#include "stm32l4xx_hal_crc.h" | |
#endif /* HAL_CRC_MODULE_ENABLED */ | |
#ifdef HAL_CRYP_MODULE_ENABLED | |
#include "stm32l4xx_hal_cryp.h" | |
#endif /* HAL_CRYP_MODULE_ENABLED */ | |
#ifdef HAL_DAC_MODULE_ENABLED | |
#include "stm32l4xx_hal_dac.h" | |
#endif /* HAL_DAC_MODULE_ENABLED */ | |
#ifdef HAL_DCMI_MODULE_ENABLED | |
#include "stm32l4xx_hal_dcmi.h" | |
#endif /* HAL_DCMI_MODULE_ENABLED */ | |
#ifdef HAL_DMA2D_MODULE_ENABLED | |
#include "stm32l4xx_hal_dma2d.h" | |
#endif /* HAL_DMA2D_MODULE_ENABLED */ | |
#ifdef HAL_DSI_MODULE_ENABLED | |
#include "stm32l4xx_hal_dsi.h" | |
#endif /* HAL_DSI_MODULE_ENABLED */ | |
#ifdef HAL_FIREWALL_MODULE_ENABLED | |
#include "stm32l4xx_hal_firewall.h" | |
#endif /* HAL_FIREWALL_MODULE_ENABLED */ | |
#ifdef HAL_FLASH_MODULE_ENABLED | |
#include "stm32l4xx_hal_flash.h" | |
#endif /* HAL_FLASH_MODULE_ENABLED */ | |
#ifdef HAL_HASH_MODULE_ENABLED | |
#include "stm32l4xx_hal_hash.h" | |
#endif /* HAL_HASH_MODULE_ENABLED */ | |
#ifdef HAL_SRAM_MODULE_ENABLED | |
#include "stm32l4xx_hal_sram.h" | |
#endif /* HAL_SRAM_MODULE_ENABLED */ | |
#ifdef HAL_NOR_MODULE_ENABLED | |
#include "stm32l4xx_hal_nor.h" | |
#endif /* HAL_NOR_MODULE_ENABLED */ | |
#ifdef HAL_NAND_MODULE_ENABLED | |
#include "stm32l4xx_hal_nand.h" | |
#endif /* HAL_NAND_MODULE_ENABLED */ | |
#ifdef HAL_I2C_MODULE_ENABLED | |
#include "stm32l4xx_hal_i2c.h" | |
#endif /* HAL_I2C_MODULE_ENABLED */ | |
#ifdef HAL_IWDG_MODULE_ENABLED | |
#include "stm32l4xx_hal_iwdg.h" | |
#endif /* HAL_IWDG_MODULE_ENABLED */ | |
#ifdef HAL_LCD_MODULE_ENABLED | |
#include "stm32l4xx_hal_lcd.h" | |
#endif /* HAL_LCD_MODULE_ENABLED */ | |
#ifdef HAL_LPTIM_MODULE_ENABLED | |
#include "stm32l4xx_hal_lptim.h" | |
#endif /* HAL_LPTIM_MODULE_ENABLED */ | |
#ifdef HAL_LTDC_MODULE_ENABLED | |
#include "stm32l4xx_hal_ltdc.h" | |
#endif /* HAL_LTDC_MODULE_ENABLED */ | |
#ifdef HAL_OPAMP_MODULE_ENABLED | |
#include "stm32l4xx_hal_opamp.h" | |
#endif /* HAL_OPAMP_MODULE_ENABLED */ | |
#ifdef HAL_OSPI_MODULE_ENABLED | |
#include "stm32l4xx_hal_ospi.h" | |
#endif /* HAL_OSPI_MODULE_ENABLED */ | |
#ifdef HAL_PWR_MODULE_ENABLED | |
#include "stm32l4xx_hal_pwr.h" | |
#endif /* HAL_PWR_MODULE_ENABLED */ | |
#ifdef HAL_QSPI_MODULE_ENABLED | |
#include "stm32l4xx_hal_qspi.h" | |
#endif /* HAL_QSPI_MODULE_ENABLED */ | |
#ifdef HAL_RNG_MODULE_ENABLED | |
#include "stm32l4xx_hal_rng.h" | |
#endif /* HAL_RNG_MODULE_ENABLED */ | |
#ifdef HAL_RTC_MODULE_ENABLED | |
#include "stm32l4xx_hal_rtc.h" | |
#endif /* HAL_RTC_MODULE_ENABLED */ | |
#ifdef HAL_SAI_MODULE_ENABLED | |
#include "stm32l4xx_hal_sai.h" | |
#endif /* HAL_SAI_MODULE_ENABLED */ | |
#ifdef HAL_SD_MODULE_ENABLED | |
#include "stm32l4xx_hal_sd.h" | |
#endif /* HAL_SD_MODULE_ENABLED */ | |
#ifdef HAL_SMBUS_MODULE_ENABLED | |
#include "stm32l4xx_hal_smbus.h" | |
#endif /* HAL_SMBUS_MODULE_ENABLED */ | |
#ifdef HAL_SPI_MODULE_ENABLED | |
#include "stm32l4xx_hal_spi.h" | |
#endif /* HAL_SPI_MODULE_ENABLED */ | |
#ifdef HAL_SWPMI_MODULE_ENABLED | |
#include "stm32l4xx_hal_swpmi.h" | |
#endif /* HAL_SWPMI_MODULE_ENABLED */ | |
#ifdef HAL_TIM_MODULE_ENABLED | |
#include "stm32l4xx_hal_tim.h" | |
#endif /* HAL_TIM_MODULE_ENABLED */ | |
#ifdef HAL_TSC_MODULE_ENABLED | |
#include "stm32l4xx_hal_tsc.h" | |
#endif /* HAL_TSC_MODULE_ENABLED */ | |
#ifdef HAL_UART_MODULE_ENABLED | |
#include "stm32l4xx_hal_uart.h" | |
#endif /* HAL_UART_MODULE_ENABLED */ | |
#ifdef HAL_USART_MODULE_ENABLED | |
#include "stm32l4xx_hal_usart.h" | |
#endif /* HAL_USART_MODULE_ENABLED */ | |
#ifdef HAL_IRDA_MODULE_ENABLED | |
#include "stm32l4xx_hal_irda.h" | |
#endif /* HAL_IRDA_MODULE_ENABLED */ | |
#ifdef HAL_SMARTCARD_MODULE_ENABLED | |
#include "stm32l4xx_hal_smartcard.h" | |
#endif /* HAL_SMARTCARD_MODULE_ENABLED */ | |
#ifdef HAL_WWDG_MODULE_ENABLED | |
#include "stm32l4xx_hal_wwdg.h" | |
#endif /* HAL_WWDG_MODULE_ENABLED */ | |
#ifdef HAL_PCD_MODULE_ENABLED | |
#include "stm32l4xx_hal_pcd.h" | |
#endif /* HAL_PCD_MODULE_ENABLED */ | |
#ifdef HAL_HCD_MODULE_ENABLED | |
#include "stm32l4xx_hal_hcd.h" | |
#endif /* HAL_HCD_MODULE_ENABLED */ | |
#ifdef HAL_GFXMMU_MODULE_ENABLED | |
#include "stm32l4xx_hal_gfxmmu.h" | |
#endif /* HAL_GFXMMU_MODULE_ENABLED */ | |
/* Exported macro ------------------------------------------------------------*/ | |
#ifdef USE_FULL_ASSERT | |
/** | |
* @brief The assert_param macro is used for function's parameters check. | |
* @param expr: If expr is false, it calls assert_failed function | |
* which reports the name of the source file and the source | |
* line number of the call that failed. | |
* If expr is true, it returns no value. | |
* @retval None | |
*/ | |
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__)) | |
/* Exported functions ------------------------------------------------------- */ | |
void assert_failed(char *file, uint32_t line); | |
#else | |
#define assert_param(expr) ((void)0U) | |
#endif /* USE_FULL_ASSERT */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32L4xx_HAL_CONF_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |