| //***************************************************************************** |
| // |
| // am_hal_rtc.h |
| //! @file |
| //! |
| //! @brief Functions for interfacing and accessing the Real-Time Clock (RTC). |
| //! |
| //! @addtogroup rtc2 Real-Time Clock (RTC) |
| //! @ingroup apollo2hal |
| //! @{ |
| // |
| //***************************************************************************** |
| |
| //***************************************************************************** |
| // |
| // Copyright (c) 2017, Ambiq Micro |
| // All rights reserved. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are met: |
| // |
| // 1. Redistributions of source code must retain the above copyright notice, |
| // this list of conditions and the following disclaimer. |
| // |
| // 2. Redistributions in binary form must reproduce the above copyright |
| // notice, this list of conditions and the following disclaimer in the |
| // documentation and/or other materials provided with the distribution. |
| // |
| // 3. Neither the name of the copyright holder nor the names of its |
| // contributors may be used to endorse or promote products derived from this |
| // software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| // POSSIBILITY OF SUCH DAMAGE. |
| // |
| // This is part of revision v1.2.10-2-gea660ad-hotfix2 of the AmbiqSuite Development Package. |
| // |
| //***************************************************************************** |
| #ifndef AM_HAL_RTC_H |
| #define AM_HAL_RTC_H |
| |
| //***************************************************************************** |
| // |
| //! @name OSC Start and Stop |
| //! @brief OSC Start and Stop defines. |
| //! |
| //! OSC Start and Stop defines to be used with \e am_hal_clkgen_osc_x(). |
| //! @{ |
| // |
| //***************************************************************************** |
| #define AM_HAL_RTC_OSC_LFRC 0x1 |
| #define AM_HAL_RTC_OSC_XT 0x0 |
| //! @} |
| |
| //***************************************************************************** |
| // |
| //! @name RTC Interrupts |
| //! @brief Macro definitions for RTC interrupt status bits. |
| //! |
| //! These macros correspond to the bits in the RTC interrupt status register. |
| //! They may be used with any of the \e am_hal_rtc_int_x() functions. |
| //! |
| //! @{ |
| // |
| //***************************************************************************** |
| #define AM_HAL_RTC_INT_ALM AM_REG_RTC_INTEN_ALM_M |
| #define AM_HAL_RTC_INT_OF AM_REG_RTC_INTEN_OF_M |
| #define AM_HAL_RTC_INT_ACC AM_REG_RTC_INTEN_ACC_M |
| #define AM_HAL_RTC_INT_ACF AM_REG_RTC_INTEN_ACF_M |
| //! @} |
| |
| //***************************************************************************** |
| // |
| //! @name RTC Alarm Repeat Interval. |
| //! @brief Macro definitions for the RTC alarm repeat interval. |
| //! |
| //! These macros correspond to the RPT bits in the RTCCTL register. |
| //! They may be used with the \e am_hal_rtc_alarm_interval_set() function. |
| //! |
| //! Note: AM_HAL_RTC_ALM_RPT_10TH and AM_HAL_RTC_ALM_RPT_100TH do not |
| //! correspond to the RPT bits but are used in conjunction with setting the |
| //! ALM100 bits in the ALMLOW register. |
| //! |
| //! @{ |
| // |
| //***************************************************************************** |
| #define AM_HAL_RTC_ALM_RPT_DIS 0x0 |
| #define AM_HAL_RTC_ALM_RPT_YR 0x1 |
| #define AM_HAL_RTC_ALM_RPT_MTH 0x2 |
| #define AM_HAL_RTC_ALM_RPT_WK 0x3 |
| #define AM_HAL_RTC_ALM_RPT_DAY 0x4 |
| #define AM_HAL_RTC_ALM_RPT_HR 0x5 |
| #define AM_HAL_RTC_ALM_RPT_MIN 0x6 |
| #define AM_HAL_RTC_ALM_RPT_SEC 0x7 |
| #define AM_HAL_RTC_ALM_RPT_10TH 0x8 |
| #define AM_HAL_RTC_ALM_RPT_100TH 0x9 |
| //! @} |
| |
| //***************************************************************************** |
| // |
| //! @name RTC Alarm 100 Interval. |
| //! @brief Macro definitions for the RTC alarm ms intervals. |
| //! |
| //! These macros are used inside the #am_hal_rtc_alarm_interval_set function |
| //! when 10ms and 100ms repeated alarm intervals are desired. |
| //! |
| //! @{ |
| // |
| //***************************************************************************** |
| #define AM_HAL_RTC_ALM100_DEFAULT 0x00 |
| #define AM_HAL_RTC_ALM100_10TH 0xF0 |
| #define AM_HAL_RTC_ALM100_100TH 0xFF |
| //! @} |
| |
| //***************************************************************************** |
| // |
| //! @brief The basic time structure used by the HAL for RTC interaction. |
| //! |
| //! All values are positive whole numbers. The HAL routines convert back and |
| //! forth to BCD. |
| // |
| //***************************************************************************** |
| typedef struct am_hal_rtc_time_struct |
| { |
| uint32_t ui32ReadError; |
| uint32_t ui32CenturyEnable; |
| uint32_t ui32Weekday; |
| uint32_t ui32Century; |
| uint32_t ui32Year; |
| uint32_t ui32Month; |
| uint32_t ui32DayOfMonth; |
| uint32_t ui32Hour; |
| uint32_t ui32Minute; |
| uint32_t ui32Second; |
| uint32_t ui32Hundredths; |
| }am_hal_rtc_time_t; |
| |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| //***************************************************************************** |
| // |
| // External function definitions |
| // |
| //***************************************************************************** |
| extern void am_hal_rtc_osc_select(uint32_t ui32OSC); |
| extern void am_hal_rtc_osc_enable(void); |
| extern void am_hal_rtc_osc_disable(void); |
| extern void am_hal_rtc_time_12hour(bool b12Hour); |
| extern void am_hal_rtc_time_set(am_hal_rtc_time_t *pTime); |
| extern uint32_t am_hal_rtc_time_get(am_hal_rtc_time_t *pTime); |
| extern void am_hal_rtc_alarm_interval_set(uint32_t ui32RepeatInterval); |
| extern void am_hal_rtc_alarm_set(am_hal_rtc_time_t *pTime, |
| uint32_t ui32RepeatInterval); |
| extern void am_hal_rtc_alarm_get(am_hal_rtc_time_t *pTime); |
| extern void am_hal_rtc_int_enable(uint32_t ui32Interrupt); |
| extern uint32_t am_hal_rtc_int_enable_get(void); |
| extern void am_hal_rtc_int_disable(uint32_t ui32Interrupt); |
| extern void am_hal_rtc_int_clear(uint32_t ui32Interrupt); |
| extern void am_hal_rtc_int_set(uint32_t ui32Interrupt); |
| extern uint32_t am_hal_rtc_int_status_get(bool bEnabledOnly); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // AM_HAL_RTC_H |
| |
| //***************************************************************************** |
| // |
| // End Doxygen group. |
| //! @} |
| // |
| //***************************************************************************** |