| /* |
| |
| Copyright (c) 2010 - 2018, Nordic Semiconductor ASA All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are met: |
| |
| 1. Redistributions of source code must retain the above copyright notice, this |
| list of conditions and the following disclaimer. |
| |
| 2. Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| |
| 3. Neither the name of Nordic Semiconductor ASA nor the names of its |
| contributors may be used to endorse or promote products derived from this |
| software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| POSSIBILITY OF SUCH DAMAGE. |
| |
| */ |
| |
| #ifndef NRF52_TO_NRF52810_H |
| #define NRF52_TO_NRF52810_H |
| |
| /*lint ++flb "Enter library region */ |
| |
| /* This file is given to prevent your SW from not compiling with the name changes between nRF51 or nRF52832 and nRF52840 devices. |
| * It redefines the old nRF51 or nRF52832 names into the new ones as long as the functionality is still supported. If the |
| * functionality is gone, there old names are not defined, so compilation will fail. Note that also includes macros |
| * from the nrf52_namechange.h file. */ |
| |
| /* Differences between latest nRF52 headers and nRF52810 headers. */ |
| |
| /* Interrupt service routines handlers. Note that handlers SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQHandler and |
| SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQHandler are not redefined since functionality is not equivalent. */ |
| #define UARTE0_UART0_IRQHandler UARTE0_IRQHandler |
| #define COMP_LPCOMP_IRQHandler COMP_IRQHandler |
| #define SWI2_EGU2_IRQHandler SWI2_IRQHandler |
| #define SWI3_EGU3_IRQHandler SWI3_IRQHandler |
| #define SWI4_EGU4_IRQHandler SWI4_IRQHandler |
| #define SWI5_EGU5_IRQHandler SWI5_IRQHandler |
| |
| /* Interrupt service routines index. Note that indexes SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQn and |
| SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQn are not redefined since functionality is not equivalent. */ |
| #define UARTE0_UART0_IRQn UARTE0_IRQn |
| #define COMP_LPCOMP_IRQn COMP_IRQn |
| #define SWI2_EGU2_IRQn SWI2_IRQn |
| #define SWI3_EGU3_IRQn SWI3_IRQn |
| #define SWI4_EGU4_IRQn SWI4_IRQn |
| #define SWI5_EGU5_IRQn SWI5_IRQn |
| |
| |
| /* From nrf52_name_change.h. Several macros changed in different versions of nRF52 headers. By defining the following, any code written for any version of nRF52 headers will still compile. */ |
| |
| /* I2S */ |
| /* Several enumerations changed case. Adding old macros to keep compilation compatibility. */ |
| #define I2S_ENABLE_ENABLE_DISABLE I2S_ENABLE_ENABLE_Disabled |
| #define I2S_ENABLE_ENABLE_ENABLE I2S_ENABLE_ENABLE_Enabled |
| #define I2S_CONFIG_MODE_MODE_MASTER I2S_CONFIG_MODE_MODE_Master |
| #define I2S_CONFIG_MODE_MODE_SLAVE I2S_CONFIG_MODE_MODE_Slave |
| #define I2S_CONFIG_RXEN_RXEN_DISABLE I2S_CONFIG_RXEN_RXEN_Disabled |
| #define I2S_CONFIG_RXEN_RXEN_ENABLE I2S_CONFIG_RXEN_RXEN_Enabled |
| #define I2S_CONFIG_TXEN_TXEN_DISABLE I2S_CONFIG_TXEN_TXEN_Disabled |
| #define I2S_CONFIG_TXEN_TXEN_ENABLE I2S_CONFIG_TXEN_TXEN_Enabled |
| #define I2S_CONFIG_MCKEN_MCKEN_DISABLE I2S_CONFIG_MCKEN_MCKEN_Disabled |
| #define I2S_CONFIG_MCKEN_MCKEN_ENABLE I2S_CONFIG_MCKEN_MCKEN_Enabled |
| #define I2S_CONFIG_SWIDTH_SWIDTH_8BIT I2S_CONFIG_SWIDTH_SWIDTH_8Bit |
| #define I2S_CONFIG_SWIDTH_SWIDTH_16BIT I2S_CONFIG_SWIDTH_SWIDTH_16Bit |
| #define I2S_CONFIG_SWIDTH_SWIDTH_24BIT I2S_CONFIG_SWIDTH_SWIDTH_24Bit |
| #define I2S_CONFIG_ALIGN_ALIGN_LEFT I2S_CONFIG_ALIGN_ALIGN_Left |
| #define I2S_CONFIG_ALIGN_ALIGN_RIGHT I2S_CONFIG_ALIGN_ALIGN_Right |
| #define I2S_CONFIG_FORMAT_FORMAT_ALIGNED I2S_CONFIG_FORMAT_FORMAT_Aligned |
| #define I2S_CONFIG_CHANNELS_CHANNELS_STEREO I2S_CONFIG_CHANNELS_CHANNELS_Stereo |
| #define I2S_CONFIG_CHANNELS_CHANNELS_LEFT I2S_CONFIG_CHANNELS_CHANNELS_Left |
| #define I2S_CONFIG_CHANNELS_CHANNELS_RIGHT I2S_CONFIG_CHANNELS_CHANNELS_Right |
| |
| /* LPCOMP */ |
| /* Corrected typo in RESULT register. */ |
| #define LPCOMP_RESULT_RESULT_Bellow LPCOMP_RESULT_RESULT_Below |
| |
| |
| /*lint --flb "Leave library region" */ |
| |
| #endif /* NRF51_TO_NRF52810_H */ |
| |
