| /* |
| |
| Copyright (c) 2010 - 2018, Nordic Semiconductor ASA All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are met: |
| |
| 1. Redistributions of source code must retain the above copyright notice, this |
| list of conditions and the following disclaimer. |
| |
| 2. Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| |
| 3. Neither the name of Nordic Semiconductor ASA nor the names of its |
| contributors may be used to endorse or promote products derived from this |
| software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| POSSIBILITY OF SUCH DAMAGE. |
| |
| */ |
| |
| #ifndef _NRF52810_PERIPHERALS_H |
| #define _NRF52810_PERIPHERALS_H |
| |
| |
| /* Power Peripheral */ |
| #define POWER_PRESENT |
| #define POWER_COUNT 1 |
| |
| #define POWER_FEATURE_RAM_REGISTERS_PRESENT |
| #define POWER_FEATURE_RAM_REGISTERS_COUNT 3 |
| |
| /* Systick timer */ |
| #define SYSTICK_PRESENT |
| #define SYSTICK_COUNT 1 |
| |
| /* Software Interrupts */ |
| #define SWI_PRESENT |
| #define SWI_COUNT 6 |
| |
| /* GPIO */ |
| #define GPIO_PRESENT |
| #define GPIO_COUNT 1 |
| |
| #define P0_PIN_NUM 32 |
| |
| /* MPU and BPROT */ |
| #define BPROT_PRESENT |
| |
| #define BPROT_REGIONS_SIZE 4096 |
| #define BPROT_REGIONS_NUM 48 |
| |
| /* Radio */ |
| #define RADIO_PRESENT |
| #define RADIO_COUNT 1 |
| |
| #define RADIO_EASYDMA_MAXCNT_SIZE 8 |
| |
| /* Accelerated Address Resolver */ |
| #define AAR_PRESENT |
| #define AAR_COUNT 1 |
| |
| #define AAR_MAX_IRK_NUM 16 |
| |
| /* AES Electronic CodeBook mode encryption */ |
| #define ECB_PRESENT |
| #define ECB_COUNT 1 |
| |
| /* AES CCM mode encryption */ |
| #define CCM_PRESENT |
| #define CCM_COUNT 1 |
| |
| /* Peripheral to Peripheral Interconnect */ |
| #define PPI_PRESENT |
| #define PPI_COUNT 1 |
| |
| #define PPI_CH_NUM 20 |
| #define PPI_FIXED_CH_NUM 12 |
| #define PPI_GROUP_NUM 6 |
| #define PPI_FEATURE_FORKS_PRESENT |
| |
| /* Event Generator Unit */ |
| #define EGU_PRESENT |
| #define EGU_COUNT 2 |
| |
| #define EGU0_CH_NUM 16 |
| #define EGU1_CH_NUM 16 |
| |
| /* Timer/Counter */ |
| #define TIMER_PRESENT |
| #define TIMER_COUNT 3 |
| |
| #define TIMER0_MAX_SIZE 32 |
| #define TIMER1_MAX_SIZE 32 |
| #define TIMER2_MAX_SIZE 32 |
| |
| #define TIMER0_CC_NUM 4 |
| #define TIMER1_CC_NUM 4 |
| #define TIMER2_CC_NUM 4 |
| |
| /* Real Time Counter */ |
| #define RTC_PRESENT |
| #define RTC_COUNT 2 |
| |
| #define RTC0_CC_NUM 3 |
| #define RTC1_CC_NUM 4 |
| |
| /* RNG */ |
| #define RNG_PRESENT |
| #define RNG_COUNT 1 |
| |
| /* Watchdog Timer */ |
| #define WDT_PRESENT |
| #define WDT_COUNT 1 |
| |
| /* Temperature Sensor */ |
| #define TEMP_PRESENT |
| #define TEMP_COUNT 1 |
| |
| /* Serial Peripheral Interface Master with DMA */ |
| #define SPIM_PRESENT |
| #define SPIM_COUNT 1 |
| |
| #define SPIM0_MAX_DATARATE 8 |
| |
| #define SPIM0_FEATURE_HARDWARE_CSN_PRESENT 0 |
| |
| #define SPIM0_FEATURE_DCX_PRESENT 0 |
| |
| #define SPIM0_FEATURE_RXDELAY_PRESENT 0 |
| |
| #define SPIM0_EASYDMA_MAXCNT_SIZE 10 |
| |
| /* Serial Peripheral Interface Slave with DMA*/ |
| #define SPIS_PRESENT |
| #define SPIS_COUNT 1 |
| |
| #define SPIS0_EASYDMA_MAXCNT_SIZE 10 |
| |
| /* Two Wire Interface Master with DMA */ |
| #define TWIM_PRESENT |
| #define TWIM_COUNT 1 |
| |
| #define TWIM0_EASYDMA_MAXCNT_SIZE 10 |
| |
| /* Two Wire Interface Slave with DMA */ |
| #define TWIS_PRESENT |
| #define TWIS_COUNT 1 |
| |
| #define TWIS0_EASYDMA_MAXCNT_SIZE 10 |
| |
| /* Universal Asynchronous Receiver-Transmitter with DMA */ |
| #define UARTE_PRESENT |
| #define UARTE_COUNT 1 |
| |
| #define UARTE0_EASYDMA_MAXCNT_SIZE 10 |
| |
| /* Quadrature Decoder */ |
| #define QDEC_PRESENT |
| #define QDEC_COUNT 1 |
| |
| /* Successive Approximation Analog to Digital Converter */ |
| #define SAADC_PRESENT |
| #define SAADC_COUNT 1 |
| |
| #define SAADC_EASYDMA_MAXCNT_SIZE 15 |
| |
| #define SAADC_CH_NUM 8 |
| |
| /* GPIO Tasks and Events */ |
| #define GPIOTE_PRESENT |
| #define GPIOTE_COUNT 1 |
| |
| #define GPIOTE_CH_NUM 8 |
| |
| #define GPIOTE_FEATURE_SET_PRESENT |
| #define GPIOTE_FEATURE_CLR_PRESENT |
| |
| /* Comparator */ |
| #define COMP_PRESENT |
| #define COMP_COUNT 1 |
| |
| /* Pulse Width Modulator */ |
| #define PWM_PRESENT |
| #define PWM_COUNT 1 |
| |
| #define PWM0_CH_NUM 4 |
| |
| #define PWM0_EASYDMA_MAXCNT_SIZE 15 |
| |
| /* Pulse Density Modulator */ |
| #define PDM_PRESENT |
| #define PDM_COUNT 1 |
| |
| #define PDM_EASYDMA_MAXCNT_SIZE 15 |
| |
| |
| #endif // _NRF52810_PERIPHERALS_H |
