| /* ------------------------------------------ |
| * Copyright (c) 2016, Synopsys, Inc. All rights reserved. |
| |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| |
| * 1) Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| |
| * 2) Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| |
| * 3) Neither the name of the Synopsys, Inc., nor the names of its contributors may |
| * be used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * \version 2016.05 |
| * \date 2014-06-20 |
| * \author Huaqi Fang(Huaqi.Fang@synopsys.com) |
| --------------------------------------------- */ |
| |
| /** |
| * \file |
| * \ingroup DEVICE_DW_IIC |
| * \brief DesignWare UART driver hardware description related header file |
| * \details detailed hardware related definitions of DesignWare UART driver |
| */ |
| |
| #ifndef _DEVICE_DW_UART_HAL_H_ |
| #define _DEVICE_DW_UART_HAL_H_ |
| |
| /* DW APB UART bit definitions */ |
| |
| /** |
| * \name DesignWare UART HAL IER Marcos |
| * \brief DesignWare UART hal IER related macros |
| * @{ |
| */ |
| /* IER */ |
| #define DW_UART_IER_DATA_AVAIL (0x01) |
| #define DW_UART_IER_XMIT_EMPTY (0x02) |
| #define DW_UART_IER_LINE_STATUS (0x04) |
| #define DW_UART_IER_MDM_STATUS (0x08) |
| #define DW_UART_IER_PTIME (0x80) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL IIR Marcos |
| * \brief DesignWare UART hal IIR related macros |
| * @{ |
| */ |
| /* IIR */ |
| /* IIR READ */ |
| #define DW_UART_IIR_IP (0x01) |
| #define DW_UART_IIR_MASK (0x0E) |
| #define DW_UART_IIR_READ_FIFO_ENABLE (0xC0) |
| |
| /* Possible interrupt IIR_MASK values */ |
| #define DW_UART_IIR_MDM_STATUS (0x00) |
| #define DW_UART_IIR_XMIT_EMPTY (0x02) |
| #define DW_UART_IIR_DATA_AVAIL (0x04) |
| #define DW_UART_IIR_LINE_STATUS (0x06) |
| #define DW_UART_IIR_RX_TIMEOUT (0x0C) |
| #define DW_UART_IIR_INT_ID_MASK (0x0f) |
| |
| /* IIR WRITE */ |
| #define DW_UART_IIR_FIFO_ENABLE (0x01) |
| #define DW_UART_IIR_RCVR_FIFO_RESET (0x02) |
| #define DW_UART_IIR_XMIT_FIFO_RESET (0x04) |
| #define DW_UART_IIR_DMA_MODE_SELECT (0x08) |
| #define DW_UART_IIR_RCV_TRIGGER_MASK (0xC0) |
| |
| /* Values for IIR receive trigger */ |
| #define DW_UART_IIR_TRIGGER_LEVEL_1_CHAR (0x00) |
| #define DW_UART_IIR_TRIGGER_LEVEL_1_4_FULL (0x40) |
| #define DW_UART_IIR_TRIGGER_LEVEL_1_2_FULL (0x80) |
| #define DW_UART_IIR_TRIGGER_LEVEL_2_LESS_FULL (0xC0) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL LCR Marcos |
| * \brief DesignWare UART hal LCR related macros |
| * @{ |
| */ |
| /* LCR */ |
| #define DW_UART_LCR_WORD_LEN_MASK (0x03) |
| #define DW_UART_LCR_STOP_BIT_MASK (0x04) |
| #define DW_UART_LCR_PARITY_MASK (0x38) |
| #define DW_UART_LCR_DPS_MASK (0x3F) |
| #define DW_UART_LCR_STICK_PARITY (0x20) |
| #define DW_UART_LCR_BREAK (0x40) |
| #define DW_UART_LCR_DLAB (0x80) |
| |
| /* Word length values */ |
| #define DW_UART_LCR_WORD_LEN5 (0x00) |
| #define DW_UART_LCR_WORD_LEN6 (0x01) |
| #define DW_UART_LCR_WORD_LEN7 (0x02) |
| #define DW_UART_LCR_WORD_LEN8 (0x03) |
| |
| /* stop bit values */ |
| #define DW_UART_LCR_1_STOP_BIT (0x00) |
| #define DW_UART_LCR_1D5_STOP_BIT (0x04) |
| #define DW_UART_LCR_2_STOP_BIT (0x04) |
| |
| /* Parity bit values */ |
| #define DW_UART_LCR_PARITY_NONE (0x00) |
| #define DW_UART_LCR_PARITY_ODD (0x08) |
| #define DW_UART_LCR_PARITY_EVEN (0x18) |
| #define DW_UART_LCR_PARITY_MARK (0x28) |
| #define DW_UART_LCR_PARITY_SPACE (0x38) |
| |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL MCR Marcos |
| * \brief DesignWare UART hal MCR related macros |
| * @{ |
| */ |
| /* MCR */ |
| #define DW_UART_MCR_DTR (0x01) |
| #define DW_UART_MCR_RTS (0x02) |
| #define DW_UART_MCR_LOOPBACK (0x10) |
| #define DW_UART_MCR_AFCE (0x20) |
| #define DW_UART_MCR_SIRE (0x40) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL LSR Marcos |
| * \brief DesignWare UART hal LSR related macros |
| * @{ |
| */ |
| /* LSR */ |
| #define DW_UART_LSR_DR (0x01) |
| #define DW_UART_LSR_OVERRUN (0x02) |
| #define DW_UART_LSR_PARITYERR (0x04) |
| #define DW_UART_LSR_FRAMEERR (0x08) |
| #define DW_UART_LSR_BREAKRCVD (0x10) |
| #define DW_UART_LSR_TXD_EMPTY (0x20) |
| #define DW_UART_LSR_TX_STATUS (0x40) |
| #define DW_UART_LSR_RX_FIFOERR (0x80) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL MSR Marcos |
| * \brief DesignWare UART hal MSR related macros |
| * @{ |
| */ |
| /* MSR */ |
| #define DW_UART_MSR_DCTS (0x01) |
| #define DW_UART_MSR_DDSR (0x02) |
| #define DW_UART_MSR_TERI (0x04) |
| #define DW_UART_MSR_DDCD (0x08) |
| #define DW_UART_MSR_CTS (0x10) |
| #define DW_UART_MSR_DSR (0x20) |
| #define DW_UART_MSR_RIC (0x40) |
| #define DW_UART_MSR_DCD (0x80) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL FCR Marcos |
| * \brief DesignWare UART hal FCR related macros |
| * @{ |
| */ |
| /* FCR */ |
| #define DW_UART_FCR_FEN (0x01) |
| #define DW_UART_FCR_RFR (0x02) |
| #define DW_UART_FCR_TFR (0x04) |
| #define DW_UART_FCR_DMS (0x08) |
| #define DW_UART_FCR_RTL (0xC0) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL USR Marcos |
| * \brief DesignWare UART hal USR related macros |
| * @{ |
| */ |
| /* USR */ |
| #define DW_UART_USR_BUSY (0x01) |
| #define DW_UART_USR_TFNF (0x02) |
| #define DW_UART_USR_TFE (0x04) |
| #define DW_UART_USR_RFNE (0x08) |
| #define DW_UART_USR_RFF (0x10) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL SFE Marcos |
| * \brief DesignWare UART hal SFE related macros |
| * @{ |
| */ |
| /* SFE */ |
| #define DW_UART_SFE_SHADOW_FIFO_ENABLE (0x01) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL SRR Marcos |
| * \brief DesignWare UART hal SRR related macros |
| * @{ |
| */ |
| /* SRR */ |
| #define DW_UART_SRR_UR (0x01) |
| #define DW_UART_SRR_RFR (0x02) |
| #define DW_UART_SRR_XFR (0x04) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL SRT Marcos |
| * \brief DesignWare UART hal SRT related macros |
| * @{ |
| */ |
| /* SRT */ |
| #define DW_UART_SRT_TRIGGER_LEVEL_1_CHAR (0x00) |
| #define DW_UART_SRT_TRIGGER_LEVEL_1_4_FULL (0x01) |
| #define DW_UART_SRT_TRIGGER_LEVEL_1_2_FULL (0x02) |
| #define DW_UART_SRT_TRIGGER_LEVEL_2_LESS_FULL (0x03) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL STET Marcos |
| * \brief DesignWare UART hal STET related macros |
| * @{ |
| */ |
| /* STET*/ |
| #define DW_UART_STET_FIFO_EMPTY (0x00) |
| #define DW_UART_STET_2_CHARS_IN_FIFO (0x01) |
| #define DW_UART_STET_1_4_FULL (0x02) |
| #define DW_UART_STET_1_2_FULL (0x03) |
| /** @} */ |
| |
| /** |
| * \name DesignWare UART HAL CPR Marcos |
| * \brief DesignWare UART hal CPR related macros |
| * @{ |
| */ |
| /* CPR*/ |
| #define DW_UART_CPR_FIFO_STAT (1<<10) |
| #define DW_UART_CPR_FIFO_MODE_OFS (16) |
| #define DW_UART_CPR_FIFO_MODE_MASK (0xFF) |
| #define DW_UART_CPR_FIFO_MODE (0xFF0000) |
| /** @} */ |
| |
| #endif /* _DEVICE_DW_UART_HAL_H_ */ |