blob: c680a661408e85d9c5b3dd9c164ed8c7762dd711 [file] [log] [blame]
//*****************************************************************************
//
// am_hal_mcuctrl.h
//! @file
//!
//! @brief Functions for accessing and configuring the MCUCTRL.
//!
//! @addtogroup mcuctrl2 MCU Control (MCUCTRL)
//! @ingroup apollo2hal
//! @{
//
//*****************************************************************************
//*****************************************************************************
//
// Copyright (c) 2017, Ambiq Micro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from this
// software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision v1.2.10-2-gea660ad-hotfix2 of the AmbiqSuite Development Package.
//
//*****************************************************************************
#ifndef AM_HAL_MCUCTRL_H
#define AM_HAL_MCUCTRL_H
//
// Deprecate the am_hal_mcuctrl_bucks_enable() and disable() functions.
// This functionality is now handled in pwrctrl.
//
#define am_hal_mcuctrl_bucks_enable am_hal_pwrctrl_bucks_enable
#define am_hal_mcuctrl_bucks_disable am_hal_pwrctrl_bucks_disable
//*****************************************************************************
//
// Define CHIP_INFO fields, which for Apollo2 are not defined in the register
// definitions.
//
//*****************************************************************************
#define AM_HAL_MCUCTRL_CHIP_INFO_CLASS_M 0xFF000000
#define AM_HAL_MCUCTRL_CHIP_INFO_CLASS_S 24
#define AM_HAL_MCUCTRL_CHIP_INFO_FLASH_SIZE_M 0x00F00000
#define AM_HAL_MCUCTRL_CHIP_INFO_FLASH_SIZE_S 20
#define AM_HAL_MCUCTRL_CHIP_INFO_SRAM_SIZE_M 0x000F0000
#define AM_HAL_MCUCTRL_CHIP_INFO_SRAM_SIZE_S 16
#define AM_HAL_MCUCTRL_CHIP_INFO_REV_M 0x0000FF00
#define AM_HAL_MCUCTRL_CHIP_INFO_REV_S 8
#define AM_HAL_MCUCTRL_CHIP_INFO_PKG_M 0x000000C0
#define AM_HAL_MCUCTRL_CHIP_INFO_PKG_S 6
#define AM_HAL_MCUCTRL_CHIP_INFO_PINS_M 0x00000038
#define AM_HAL_MCUCTRL_CHIP_INFO_PINS_S 3
#define AM_HAL_MCUCTRL_CHIP_INFO_TEMP_M 0x00000006
#define AM_HAL_MCUCTRL_CHIP_INFO_TEMP_S 1
#define AM_HAL_MCUCTRL_CHIP_INFO_QUAL_M 0x00000001
#define AM_HAL_MCUCTRL_CHIP_INFO_QUAL_S 0
//*****************************************************************************
//
// Apollo Number Decode.
//
//*****************************************************************************
extern const uint32_t g_am_hal_mcuctrl_flash_size[];
extern const uint32_t g_am_hal_mcuctrl_sram_size[];
//*****************************************************************************
//
//! MCUCTRL device structure
//
//*****************************************************************************
typedef struct
{
//
//! Device part number. (BCD format)
//
uint32_t ui32ChipPN;
//
//! Unique Chip ID 0.
//
uint32_t ui32ChipID0;
//
//! Unique Chip ID 1.
//
uint32_t ui32ChipID1;
//
//! Chip Revision.
//
uint32_t ui32ChipRev;
//
//! Vendor ID.
//
uint32_t ui32VendorID;
//
//! Qualified chip.
//
uint32_t ui32Qualified;
//
//! Flash Size.
//
uint32_t ui32FlashSize;
//
//! SRAM Size.
//
uint32_t ui32SRAMSize;
//
// JEDEC chip info
//
uint32_t ui32JedecPN;
uint32_t ui32JedecJEPID;
uint32_t ui32JedecCHIPREV;
uint32_t ui32JedecCID;
}
am_hal_mcuctrl_device_t;
//*****************************************************************************
//
//! MCUCTRL fault structure
//
//*****************************************************************************
typedef struct
{
//
//! ICODE bus fault occurred.
//
bool bICODE;
//
//! ICODE bus fault address.
//
uint32_t ui32ICODE;
//
//! DCODE bus fault occurred.
//
bool bDCODE;
//
//! DCODE bus fault address.
//
uint32_t ui32DCODE;
//
//! SYS bus fault occurred.
//
bool bSYS;
//
//! SYS bus fault address.
//
uint32_t ui32SYS;
}
am_hal_mcuctrl_fault_t;
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// External function definitions
//
//*****************************************************************************
extern void am_hal_mcuctrl_device_info_get(am_hal_mcuctrl_device_t *psDevice);
extern void am_hal_mcuctrl_fault_capture_enable(void);
extern void am_hal_mcuctrl_fault_capture_disable(void);
extern void am_hal_mcuctrl_fault_status(am_hal_mcuctrl_fault_t *psFault);
#ifdef __cplusplus
}
#endif
#endif // AM_HAL_MCUCTRL_H
//*****************************************************************************
//
// End Doxygen group.
//! @}
//
//*****************************************************************************