| # |
| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # |
| |
| # Package: hw/bsp/bmd300eval |
| |
| syscfg.defs: |
| BSP_NRF52: |
| description: 'Set to indicate that BSP has NRF52' |
| value: 1 |
| |
| UART_0: |
| description: 'Whether to enable UART0' |
| value: 1 |
| UART_0_PIN_TX: |
| description: 'TX pin for UART0' |
| value: 6 |
| UART_0_PIN_RX: |
| description: 'RX pin for UART0' |
| value: 8 |
| UART_0_PIN_RTS: |
| description: 'RTS pin for UART0' |
| value: 5 |
| UART_0_PIN_CTS: |
| description: 'CTS pin for UART0' |
| value: 7 |
| |
| UART_1: |
| description: 'Whether to enable bitbanger UART1' |
| value: 0 |
| UART_1_PIN_TX: |
| description: 'TX pin for UART1' |
| value: -1 |
| UART_1_PIN_RX: |
| description: 'RX pin for UART1' |
| value: -1 |
| |
| SPI_0_MASTER_PIN_SCK: |
| description: 'SCK pin for SPI_0_MASTER' |
| value: 23 |
| SPI_0_MASTER_PIN_MOSI: |
| description: 'MOSI pin for SPI_0_MASTER' |
| value: 24 |
| SPI_0_MASTER_PIN_MISO: |
| description: 'MISO pin for SPI_0_MASTER' |
| value: 25 |
| |
| SPI_0_SLAVE_PIN_SCK: |
| description: 'SCK pin for SPI_0_SLAVE' |
| value: 23 |
| SPI_0_SLAVE_PIN_MOSI: |
| description: 'MOSI pin for SPI_0_SLAVE' |
| value: 24 |
| SPI_0_SLAVE_PIN_MISO: |
| description: 'MISO pin for SPI_0_SLAVE' |
| value: 25 |
| SPI_0_SLAVE_PIN_SS: |
| description: 'SS pin for SPI_0_SLAVE' |
| value: 22 |
| |
| I2C_0_PIN_CLK: |
| description: 'Pin Number for I2C Clock' |
| value: 15 |
| I2C_0_PIN_SDA: |
| description: 'Pin Number for I2C SDA' |
| value: 14 |
| |
| TIMER_0: |
| description: 'NRF52 Timer 0' |
| value: 1 |
| TIMER_1: |
| description: 'NRF52 Timer 1' |
| value: 0 |
| TIMER_2: |
| description: 'NRF52 Timer 2' |
| value: 0 |
| TIMER_3: |
| description: 'NRF52 Timer 3' |
| value: 0 |
| TIMER_4: |
| description: 'NRF52 Timer 4' |
| value: 0 |
| TIMER_5: |
| description: 'NRF52 RTC 0' |
| value: 0 |
| |
| syscfg.defs.BLE_LP_CLOCK: |
| TIMER_0: |
| value: 0 |
| TIMER_5: |
| value: 1 |
| |
| syscfg.vals: |
| CONFIG_FCB_FLASH_AREA: FLASH_AREA_NFFS |
| REBOOT_LOG_FLASH_AREA: FLASH_AREA_REBOOT_LOG |
| NFFS_FLASH_AREA: FLASH_AREA_NFFS |
| COREDUMP_FLASH_AREA: FLASH_AREA_IMAGE_1 |
| MCU_DCDC_ENABLED: 1 |
| XTAL_32768: 1 |
| |
| syscfg.vals.BLE_LP_CLOCK: |
| OS_CPUTIME_FREQ: 32768 |
| OS_CPUTIME_TIMER_NUM: 5 |
| BLE_XTAL_SETTLE_TIME: 1500 |