Google Git
Sign in
apache / mynewt-documentation / 6c5108fd1f3c7b62340907677a9250c6c980dfda / . / versions / v1_4_0 / mynewt-core / hw / mcu / stm / stm32f3xx / src / ext / Drivers / STM32F3xx_HAL_Driver / Inc / stm32f3xx_hal_comp_ex.h
blob: 8a2a937e7c3ce921d79b7cb40a9c2430bc5c4fde [file] [log] [blame]
/**
******************************************************************************
* @file stm32f3xx_hal_comp_ex.h
* @author MCD Application Team
* @brief Header file of COMP HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F3xx_HAL_COMP_EX_H
#define __STM32F3xx_HAL_COMP_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f3xx_hal_def.h"
/** @addtogroup STM32F3xx_HAL_Driver
* @{
*/
/** @defgroup COMPEx COMPEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup COMPEx_Exported_Constants COMP Extended Exported Constants
* @{
*/
#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F302xE/STM32F303xE/STM32F398xx/STM32F302xC/STM32F303xC/STM32F358xx Product devices)
* @{
*/
#define COMP_INVERTINGINPUT_1_4VREFINT (0x00000000U) /*!< 1U/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1U/2 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3U/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< IO1 (PA0 for COMP1, PA2 for COMP2, PD15 for COMP3,
PE8 for COMP4, PD13 for COMP5, PD10 for COMP6,
PC0 for COMP7) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO2 COMP_CSR_COMPxINSEL /*!< IO2 (PB12 for COMP3, PB2 for COMP4, PB10 for COMP5,
PB15 for COMP6) connected to comparator inverting input */
/* Aliases for compatibility */
#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
/**
* @}
*/
#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
* @{
*/
#define COMP_INVERTINGINPUT_1_4VREFINT (0x00000000U) /*!< 1U/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1U/2 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3U/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< IO1 (PA2 for COMP2, PB2 for COMP4, PB15 for COMP6)
connected to comparator inverting input */
/* Aliases for compatibility */
#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
/**
* @}
*/
#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F303x8/STM32F334x8/STM32F328xx Product devices)
* @{
*/
/* Note: On these STM32 devices, there is only 1 comparator inverting input */
/* connected to a GPIO. */
/* It must be chosen among the 2 literals COMP_INVERTINGINPUT_IOx */
/* depending on comparator instance COMPx. */
#define COMP_INVERTINGINPUT_1_4VREFINT (0x00000000U) /*!< 1U/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1U/2 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3U/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< IO1 (PA2 for COMP2),
connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< IO2 (PB2 for COMP4, PB15 for COMP6)
connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC2_CH1 COMP_CSR_COMPxINSEL_3 /*!< DAC2_CH1_OUT connected to comparator inverting input */
/* Aliases for compatibility */
#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
/**
* @}
*/
#elif defined(STM32F373xC) || defined(STM32F378xx)
/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F373xC/STM32F378xx Product devices)
* @{
*/
#define COMP_INVERTINGINPUT_1_4VREFINT (0x00000000U) /*!< 1U/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_1_2VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_0) /*!< 1U/2 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_3_4VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_1) /*!< 3U/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_VREFINT ((uint32_t)(COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0)) /*!< VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH1 ((uint32_t)COMP_CSR_COMPxINSEL_2) /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1_CH2 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0)) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO1 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1)) /*!< IO1 (PA0 for COMP1, PA2 for COMP2) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC2_CH1 ((uint32_t)COMP_CSR_COMPxINSEL) /*!< DAC2_CH1_OUT connected to comparator inverting input */
/* Aliases for compatibility */
#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
/**
* @}
*/
#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
/* STM32F302xC || STM32F303xC || STM32F358xx */
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< IO1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3,
PB0 for COMP4, PD12 for COMP5, PD11 for COMP6,
PA0 for COMP7) connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_IO2 COMP_CSR_COMPxNONINSEL /*!< IO2 (PA3 for COMP2, PD14 for COMP3, PE7 for COMP4, PB13 for COMP5,
PB11 for COMP6, PC1 for COMP7) connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP1_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
/**
* @}
*/
#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< IO1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6)
connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP2_CSR_COMP2INPDAC /*!< DAC ouput connected to comparator COMP2 non inverting input */
/**
* @}
*/
#elif defined(STM32F373xC) || defined(STM32F378xx)
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F373xC/STM32F378xx Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< IO1 (PA1 for COMP1, PA3 for COMP2)
connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
/**
* @}
*/
#elif defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F302xE/STM32F303xE/STM32F398xx Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< IO1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3,
PB0 for COMP4, PD12 for COMP5, PD11 for COMP6,
PA0 for COMP7) connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP1_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
/**
* @}
*/
#else
/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (Other Product devices)
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< IO1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6)
connected to comparator non inverting input */
/**
* @}
*/
#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
* Elements value convention on 16 LSB: 00XXXX0000YYYYYYb
* - YYYYYY : Applicable comparator instance number (bitmap format: 000010 for COMP2, 100000 for COMP6)
* - XXXX : COMPxOUTSEL value
* @{
*/
/* Output Redirection values common to all comparators COMP2, COMP4 and COMP6 */
#define COMP_OUTPUT_NONE (0x0000002AU) /*!< COMP2, COMP4 or COMP6 output isn't connected to other peripherals */
#define COMP_OUTPUT_TIM1BKIN (0x0000042AU) /*!< COMP2, COMP4 or COMP6 output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2_BRK2 (0x0000082AU) /*!< COMP2, COMP4 or COMP6 output connected to TIM1 Break Input 2 (BRK2) */
#define COMP_OUTPUT_TIM1BKIN2 (0x0000142AU) /*!< COMP2, COMP4 or COMP6 output connected to TIM1 Break Input 2 (BKIN2) */
/* Output Redirection specific to COMP2 */
#define COMP_OUTPUT_TIM1OCREFCLR (0x00001802U) /*!< COMP2 output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM1IC1 (0x00001C02U) /*!< COMP2 output connected to TIM1 Input Capture 1U */
#define COMP_OUTPUT_TIM2IC4 (0x00002002U) /*!< COMP2 output connected to TIM2 Input Capture 4U */
#define COMP_OUTPUT_TIM2OCREFCLR (0x00002402U) /*!< COMP2 output connected to TIM2 OCREF Clear */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM15IC2 (0x00002008U) /*!< COMP4 output connected to TIM15 Input Capture 2U */
#define COMP_OUTPUT_TIM15OCREFCLR (0x00002808U) /*!< COMP4 output connected to TIM15 OCREF Clear */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 (0x00001820U) /*!< COMP6 output connected to TIM2 Input Capture 2U */
#define COMP_OUTPUT_COMP6_TIM2OCREFCLR (0x00002020U) /*!< COMP6 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR (0x00002420U) /*!< COMP6 output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 (0x00002820U) /*!< COMP6 output connected to TIM16 Input Capture 1U */
/**
* @}
*/
#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F303x8/STM32F334x8/STM32F328xx Product devices)
* Elements value convention on 16 LSB: 00XXXX0000YYYYYYb
* - YYYYYY : Applicable comparator instance number (bitmap format: 000010 for COMP2, 100000 for COMP6)
* - XXXX : COMPxOUTSEL value
* @{
*/
/* Output Redirection values common to all comparators COMP2, COMP4 and COMP6 */
#define COMP_OUTPUT_NONE (0x0000002AU) /*!< COMP2, COMP4 or COMP6 output isn't connected to other peripherals */
#define COMP_OUTPUT_TIM1BKIN (0x0000042AU) /*!< COMP2, COMP4 or COMP6 output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2 (0x0000082AU) /*!< COMP2, COMP4 or COMP6 output connected to TIM1 Break Input 2 (BKIN2) */
/* Output Redirection common to COMP2 and COMP4 */
#define COMP_OUTPUT_TIM3OCREFCLR (0x00002C0AU) /*!< COMP2 or COMP4 output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP2 */
#define COMP_OUTPUT_TIM1OCREFCLR (0x00001802U) /*!< COMP2 output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM1IC1 (0x00001C02U) /*!< COMP2 output connected to TIM1 Input Capture 1U */
#define COMP_OUTPUT_TIM2IC4 (0x00002002U) /*!< COMP2 output connected to TIM2 Input Capture 4U */
#define COMP_OUTPUT_TIM2OCREFCLR (0x00002402U) /*!< COMP2 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM3IC1 (0x00002802U) /*!< COMP2 output connected to TIM3 Input Capture 1U */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM3IC3 (0x00001808U) /*!< COMP4 output connected to TIM3 Input Capture 3U */
#define COMP_OUTPUT_TIM15IC2 (0x00002008U) /*!< COMP4 output connected to TIM15 Input Capture 2U */
#define COMP_OUTPUT_TIM15OCREFCLR (0x00002808U) /*!< COMP4 output connected to TIM15 OCREF Clear */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 (0x00001820U) /*!< COMP6 output connected to TIM2 Input Capture 2U */
#define COMP_OUTPUT_COMP6_TIM2OCREFCLR (0x00002020U) /*!< COMP6 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR (0x00002420U) /*!< COMP6 output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 (0x00002820U) /*!< COMP6 output connected to TIM16 Input Capture 1U */
/**
* @}
*/
#elif defined(STM32F302xC) || defined(STM32F302xE)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F302xC/STM32F302xE Product devices)
* Elements value convention on 16 LSB: 00XXXX0000YYYYYYb
* - YYYYYY : Applicable comparator instance number (bitmap format: 000001 for COMP1, 100000 for COMP6)
* - XXXX : COMPxOUTSEL value
* @{
*/
/* Output Redirection values common to all comparators COMP1, COMP2, COMP4, COMP6 */
#define COMP_OUTPUT_NONE (0x0000002BU) /*!< COMP1, COMP2, COMP4 or COMP6 output isn't connected to other peripherals */
#define COMP_OUTPUT_TIM1BKIN (0x0000042BU) /*!< COMP1, COMP2, COMP4 or COMP6 output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2_BRK2 (0x0000082BU) /*!< COMP1, COMP2, COMP4 or COMP6 output connected to TIM1 Break Input 2 (BRK2) */
#define COMP_OUTPUT_TIM1BKIN2 (0x0000142BU) /*!< COMP1, COMP2, COMP4 or COMP6 output connected to TIM1 Break Input 2 (BKIN2) */
/* Output Redirection common to COMP1 and COMP2 */
#define COMP_OUTPUT_TIM1OCREFCLR (0x00001803U) /*!< COMP1 or COMP2 output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM1IC1 (0x00001C03U) /*!< COMP1 or COMP2 output connected to TIM1 Input Capture 1U */
#define COMP_OUTPUT_TIM2IC4 (0x00002003U) /*!< COMP1 or COMP2 output connected to TIM2 Input Capture 4U */
#define COMP_OUTPUT_TIM2OCREFCLR (0x00002403U) /*!< COMP1 or COMP2 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM3IC1 (0x00002803U) /*!< COMP1 or COMP2 output connected to TIM3 Input Capture 1U */
/* Output Redirection common to COMP1,COMP2 and COMP4 */
#define COMP_OUTPUT_TIM3OCREFCLR (0x00002C0BU) /*!< COMP1, COMP2 or COMP4 output connected to TIM3 OCREF Clear */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM3IC3 (0x00001808U) /*!< COMP4 output connected to TIM3 Input Capture 3U */
#define COMP_OUTPUT_TIM15IC2 (0x00002008U) /*!< COMP4 output connected to TIM15 Input Capture 2U */
#define COMP_OUTPUT_TIM4IC2 (0x00002408U) /*!< COMP4 output connected to TIM4 Input Capture 2U */
#define COMP_OUTPUT_TIM15OCREFCLR (0x00002808U) /*!< COMP4 output connected to TIM15 OCREF Clear */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 (0x00001820U) /*!< COMP6 output connected to TIM2 Input Capture 2U */
#define COMP_OUTPUT_COMP6_TIM2OCREFCLR (0x00002020U) /*!< COMP6 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR (0x00002420U) /*!< COMP6 output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 (0x00002820U) /*!< COMP6 output connected to TIM16 Input Capture 1U */
#define COMP_OUTPUT_TIM4IC4 (0x00002C20U) /*!< COMP6 output connected to TIM4 Input Capture 4U */
/**
* @}
*/
#elif defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F303xC/STM32F358xx Product devices)
* Elements value convention on 16 LSB: 00XXXX000YYYYYYYb
* - YYYYYYY : Applicable comparator instance number (bitmap format: 0000001 for COMP1, 1000000 for COMP7)
* - XXXX : COMPxOUTSEL value
* @{
*/
/* Output Redirection values common to all comparators COMP1...COMP7 */
#define COMP_OUTPUT_NONE (0x0000007FU) /*!< COMP1, COMP2... or COMP7 output isn't connected to other peripherals */
#define COMP_OUTPUT_TIM1BKIN (0x0000047FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2 (0x0000087FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM1 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM8BKIN (0x00000C7FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM8 Break Input (BKIN) */
#define COMP_OUTPUT_TIM8BKIN2 (0x0000107FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM8 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2 (0x0000147FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM1 Break Input 2 and TIM8 Break Input 2U */
/* Output Redirection common to COMP1, COMP2, COMP3 and COMP7 */
#define COMP_OUTPUT_TIM1OCREFCLR (0x00001847U) /*!< COMP1, COMP2, COMP3 or COMP7 output connected to TIM1 OCREF Clear */
/* Output Redirection common to COMP1, COMP2 and COMP3 */
#define COMP_OUTPUT_TIM2OCREFCLR (0x00002407U) /*!< COMP1, COMP2 or COMP3 output connected to TIM2 OCREF Clear */
/* Output Redirection common to COMP1, COMP2, COMP4 and COMP5 */
#define COMP_OUTPUT_TIM3OCREFCLR (0x00002C1BU) /*!< COMP1, COMP2, COMP4 or COMP5 output connected to TIM3 OCREF Clear */
/* Output Redirection common to COMP4, COMP5, COMP6 and COMP7 */
#define COMP_OUTPUT_TIM8OCREFCLR (0x00001C78U) /*!< COMP4, COMP5, COMP6 or COMP7 output connected to TIM8 OCREF Clear */
/* Output Redirection common to COMP1 and COMP2 */
#define COMP_OUTPUT_TIM1IC1 (0x00001C03U) /*!< COMP1 or COMP2 output connected to TIM1 Input Capture 1U */
#define COMP_OUTPUT_TIM2IC4 (0x00002003U) /*!< COMP1 or COMP2 output connected to TIM2 Input Capture 4U */
#define COMP_OUTPUT_TIM3IC1 (0x00002803U) /*!< COMP1 or COMP2 output connected to TIM3 Input Capture 1U */
/* Output Redirection specific to COMP3 */
#define COMP_OUTPUT_TIM4IC1 (0x00001C04U) /*!< COMP3 output connected to TIM4 Input Capture 1U */
#define COMP_OUTPUT_TIM3IC2 (0x00002004U) /*!< COMP3 output connected to TIM3 Input Capture 2U */
#define COMP_OUTPUT_TIM15IC1 (0x00002804U) /*!< COMP3 output connected to TIM15 Input Capture 1U */
#define COMP_OUTPUT_TIM15BKIN (0x00002C04U) /*!< COMP3 output connected to TIM15 Break Input (BKIN) */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM3IC3 (0x00001808U) /*!< COMP4 output connected to TIM3 Input Capture 3U */
#define COMP_OUTPUT_TIM15IC2 (0x00002008U) /*!< COMP4 output connected to TIM15 Input Capture 2U */
#define COMP_OUTPUT_TIM4IC2 (0x00002408U) /*!< COMP4 output connected to TIM4 Input Capture 2U */
#define COMP_OUTPUT_TIM15OCREFCLR (0x00002808U) /*!< COMP4 output connected to TIM15 OCREF Clear */
/* Output Redirection specific to COMP5 */
#define COMP_OUTPUT_TIM2IC1 (0x00001810U) /*!< COMP5 output connected to TIM2 Input Capture 1U */
#define COMP_OUTPUT_TIM17IC1 (0x00002010U) /*!< COMP5 output connected to TIM17 Input Capture 1U */
#define COMP_OUTPUT_TIM4IC3 (0x00002410U) /*!< COMP5 output connected to TIM4 Input Capture 3U */
#define COMP_OUTPUT_TIM16BKIN (0x00002810U) /*!< COMP5 output connected to TIM16 Break Input (BKIN) */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 (0x00001820U) /*!< COMP6 output connected to TIM2 Input Capture 2U */
#define COMP_OUTPUT_COMP6_TIM2OCREFCLR (0x00002020U) /*!< COMP6 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR (0x00002420U) /*!< COMP6 output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 (0x00002820U) /*!< COMP6 output connected to TIM16 Input Capture 1U */
#define COMP_OUTPUT_TIM4IC4 (0x00002C20U) /*!< COMP6 output connected to TIM4 Input Capture 4U */
/* Output Redirection specific to COMP7 */
#define COMP_OUTPUT_TIM2IC3 (0x00002040U) /*!< COMP7 output connected to TIM2 Input Capture 3U */
#define COMP_OUTPUT_TIM1IC2 (0x00002440U) /*!< COMP7 output connected to TIM1 Input Capture 2U */
#define COMP_OUTPUT_TIM17OCREFCLR (0x00002840U) /*!< COMP7 output connected to TIM17 OCREF Clear */
#define COMP_OUTPUT_TIM17BKIN (0x00002C40U) /*!< COMP7 output connected to TIM17 Break Input (BKIN) */
/**
* @}
*/
#elif defined(STM32F303xE) || defined(STM32F398xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F303xE/STM32F398xx Product devices)
* Elements value convention on 16 LSB: 00XXXX000YYYYYYYb
* - YYYYYYY : Applicable comparator instance number (bitmap format: 0000001 for COMP1, 1000000 for COMP7)
* - XXXX : COMPxOUTSEL value
* @{
*/
/* Output Redirection values common to all comparators COMP1...COMP7 */
#define COMP_OUTPUT_NONE (0x0000007FU) /*!< COMP1, COMP2... or COMP7 output isn't connected to other peripherals */
#define COMP_OUTPUT_TIM1BKIN (0x0000047FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1BKIN2 (0x0000087FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM1 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM8BKIN (0x00000C7FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM8 Break Input (BKIN) */
#define COMP_OUTPUT_TIM8BKIN2 (0x0000107FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM8 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2 (0x0000147FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM1 Break Input 2 and TIM8 Break Input 2U */
#define COMP_OUTPUT_TIM20BKIN (0x0000307FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM20 Break Input (BKIN) */
#define COMP_OUTPUT_TIM20BKIN2 (0x0000347FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM20 Break Input 2 (BKIN2) */
#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2 (0x0000387FU) /*!< COMP1, COMP2... or COMP7 output connected to TIM1 Break Input 2U, TIM8 Break Input 2 and TIM20 Break Input 2 */
/* Output Redirection common to COMP1, COMP2, COMP3 and COMP7 */
#define COMP_OUTPUT_TIM1OCREFCLR (0x00001847U) /*!< COMP1, COMP2, COMP3 or COMP7 output connected to TIM1 OCREF Clear */
/* Output Redirection common to COMP1, COMP2 and COMP3 */
#define COMP_OUTPUT_TIM2OCREFCLR (0x00002407U) /*!< COMP1, COMP2 or COMP3 output connected to TIM2 OCREF Clear */
/* Output Redirection common to COMP1, COMP2, COMP4 and COMP5 */
#define COMP_OUTPUT_TIM3OCREFCLR (0x00002C1BU) /*!< COMP1, COMP2, COMP4 or COMP5 output connected to TIM3 OCREF Clear */
/* Output Redirection common to COMP4, COMP5, COMP6 and COMP7 */
#define COMP_OUTPUT_TIM8OCREFCLR (0x00001C78U) /*!< COMP4, COMP5, COMP6 or COMP7 output connected to TIM8 OCREF Clear */
/* Output Redirection common to COMP1 and COMP2 */
#define COMP_OUTPUT_TIM1IC1 (0x00001C03U) /*!< COMP1 or COMP2 output connected to TIM1 Input Capture 1U */
#define COMP_OUTPUT_TIM2IC4 (0x00002003U) /*!< COMP1 or COMP2 output connected to TIM2 Input Capture 4U */
#define COMP_OUTPUT_TIM3IC1 (0x00002803U) /*!< COMP1 or COMP2 output connected to TIM3 Input Capture 1U */
/* Output Redirection specific to COMP2 */
#define COMP_OUTPUT_TIM20OCREFCLR (0x00003C04U) /*!< COMP2 output connected to TIM20 OCREF Clear */
/* Output Redirection specific to COMP3 */
#define COMP_OUTPUT_TIM4IC1 (0x00001C04U) /*!< COMP3 output connected to TIM4 Input Capture 1U */
#define COMP_OUTPUT_TIM3IC2 (0x00002004U) /*!< COMP3 output connected to TIM3 Input Capture 2U */
#define COMP_OUTPUT_TIM15IC1 (0x00002804U) /*!< COMP3 output connected to TIM15 Input Capture 1U */
#define COMP_OUTPUT_TIM15BKIN (0x00002C04U) /*!< COMP3 output connected to TIM15 Break Input (BKIN) */
/* Output Redirection specific to COMP4 */
#define COMP_OUTPUT_TIM3IC3 (0x00001808U) /*!< COMP4 output connected to TIM3 Input Capture 3U */
#define COMP_OUTPUT_TIM15IC2 (0x00002008U) /*!< COMP4 output connected to TIM15 Input Capture 2U */
#define COMP_OUTPUT_TIM4IC2 (0x00002408U) /*!< COMP4 output connected to TIM4 Input Capture 2U */
#define COMP_OUTPUT_TIM15OCREFCLR (0x00002808U) /*!< COMP4 output connected to TIM15 OCREF Clear */
/* Output Redirection specific to COMP5 */
#define COMP_OUTPUT_TIM2IC1 (0x00001810U) /*!< COMP5 output connected to TIM2 Input Capture 1U */
#define COMP_OUTPUT_TIM17IC1 (0x00002010U) /*!< COMP5 output connected to TIM17 Input Capture 1U */
#define COMP_OUTPUT_TIM4IC3 (0x00002410U) /*!< COMP5 output connected to TIM4 Input Capture 3U */
#define COMP_OUTPUT_TIM16BKIN (0x00002810U) /*!< COMP5 output connected to TIM16 Break Input (BKIN) */
/* Output Redirection specific to COMP6 */
#define COMP_OUTPUT_TIM2IC2 (0x00001820U) /*!< COMP6 output connected to TIM2 Input Capture 2U */
#define COMP_OUTPUT_COMP6_TIM2OCREFCLR (0x00002020U) /*!< COMP6 output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM16OCREFCLR (0x00002420U) /*!< COMP6 output connected to TIM16 OCREF Clear */
#define COMP_OUTPUT_TIM16IC1 (0x00002820U) /*!< COMP6 output connected to TIM16 Input Capture 1U */
#define COMP_OUTPUT_TIM4IC4 (0x00002C20U) /*!< COMP6 output connected to TIM4 Input Capture 4U */
/* Output Redirection specific to COMP7 */
#define COMP_OUTPUT_TIM2IC3 (0x00002040U) /*!< COMP7 output connected to TIM2 Input Capture 3U */
#define COMP_OUTPUT_TIM1IC2 (0x00002440U) /*!< COMP7 output connected to TIM1 Input Capture 2U */
#define COMP_OUTPUT_TIM17OCREFCLR (0x00002840U) /*!< COMP7 output connected to TIM17 OCREF Clear */
#define COMP_OUTPUT_TIM17BKIN (0x00002C40U) /*!< COMP7 output connected to TIM17 Break Input (BKIN) */
/**
* @}
*/
#elif defined(STM32F373xC) || defined(STM32F378xx)
/** @defgroup COMPEx_Output COMP Extended Output (STM32F373xC/STM32F378xx Product devices)
* Elements value convention: 00000XXX000000YYb
* - YY : Applicable comparator instance number (bitmap format: 01 for COMP1, 10 for COMP2)
* - XXX : COMPxOUTSEL value
* @{
*/
/* Output Redirection values common to all comparators COMP1 and COMP2 */
#define COMP_OUTPUT_NONE (0x0003U) /*!< COMP1 or COMP2 output isn't connected to other peripherals */
#define COMP_OUTPUT_TIM2IC4 (0x0403U) /*!< COMP1 or COMP2 output connected to TIM2 Input Capture 4U */
#define COMP_OUTPUT_TIM2OCREFCLR (0x0503U) /*!< COMP1 or COMP2 output connected to TIM2 OCREF Clear */
/* Output Redirection specific to COMP1 */
#define COMP_OUTPUT_TIM15BKIN (0x0101U) /*!< COMP1 output connected to TIM15 Break Input */
#define COMP_OUTPUT_COMP1_TIM3IC1 (0x0201U) /*!< COMP1 output connected to TIM3 Input Capture 1U */
#define COMP_OUTPUT_COMP1_TIM3OCREFCLR (0x0301U) /*!< COMP1 output connected to TIM3 OCREF Clear */
#define COMP_OUTPUT_TIM5IC4 (0x0601U) /*!< COMP1 output connected to TIM5 Input Capture 4U */
#define COMP_OUTPUT_TIM5OCREFCLR (0x0701U) /*!< COMP1 output connected to TIM5 OCREF Clear */
/* Output Redirection specific to COMP2 */
#define COMP_OUTPUT_TIM16BKIN (0x0102U) /*!< COMP2 output connected to TIM16 Break Input */
#define COMP_OUTPUT_TIM4IC1 (0x0202U) /*!< COMP2 output connected to TIM4 Input Capture 1U */
#define COMP_OUTPUT_TIM4OCREFCLR (0x0302U) /*!< COMP2 output connected to TIM4 OCREF Clear */
#define COMP_OUTPUT_COMP2_TIM3IC1 (0x0602U) /*!< COMP2 output connected to TIM3 Input Capture 1U */
#define COMP_OUTPUT_COMP2_TIM3OCREFCLR (0x0702U) /*!< COMP2 output connected to TIM3 OCREF Clear */
/**
* @}
*/
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_WindowMode COMP Extended WindowMode (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
* @{
*/
#define COMP_WINDOWMODE_DISABLE (0x00000000U) /*!< Window mode disabled */
#define COMP_WINDOWMODE_ENABLE COMP_CSR_COMPxWNDWEN /*!< Window mode enabled: non inverting input of comparator X (x=2U,4,6U)
is connected to the non inverting input of comparator X-1U */
/**
* @}
*/
#elif defined(STM32F373xC) || defined(STM32F378xx)
/** @defgroup COMPEx_WindowMode COMP Extended WindowMode (STM32F373xC/STM32F378xx Product devices)
* @{
*/
#define COMP_WINDOWMODE_DISABLE (0x00000000U) /*!< Window mode disabled */
#define COMP_WINDOWMODE_ENABLE ((uint32_t)COMP_CSR_COMPxWNDWEN) /*!< Window mode enabled: non inverting input of comparator 2
is connected to the non inverting input of comparator 1 (PA1) */
/**
* @}
*/
#else
/** @defgroup COMPEx_WindowMode COMP Extended WindowMode (Other Product devices)
* @{
*/
#define COMP_WINDOWMODE_DISABLE (0x00000000U) /*!< Window mode disabled (not available) */
/**
* @}
*/
#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
/** @defgroup COMPEx_Mode COMP Extended Mode
* @{
*/
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
defined(STM32F373xC) || defined(STM32F378xx)
/* Please refer to the electrical characteristics in the device datasheet for
the power consumption values */
#define COMP_MODE_HIGHSPEED (0x00000000U) /*!< High Speed */
#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMPxMODE_0 /*!< Medium Speed */
#define COMP_MODE_LOWPOWER COMP_CSR_COMPxMODE_1 /*!< Low power mode */
#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMPxMODE /*!< Ultra-low power mode */
#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
/* STM32F373xC || STM32F378xx */
/**
* @}
*/
/** @defgroup COMPEx_Hysteresis COMP Extended Hysteresis
* @{
*/
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
defined(STM32F373xC) || defined(STM32F378xx)
#define COMP_HYSTERESIS_NONE (0x00000000U) /*!< No hysteresis */
#define COMP_HYSTERESIS_LOW COMP_CSR_COMPxHYST_0 /*!< Hysteresis level low */
#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMPxHYST_1 /*!< Hysteresis level medium */
#define COMP_HYSTERESIS_HIGH COMP_CSR_COMPxHYST /*!< Hysteresis level high */
#else
#define COMP_HYSTERESIS_NONE (0x00000000U) /*!< No hysteresis */
#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
/* STM32F373xC || STM32F378xx */
/**
* @}
*/
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F301x8/STM32F302x8/STM32F303x8/STM32F334x8/STM32F318xx/STM32F328xx Product devices)
* @{
*/
/* No blanking source can be selected for all comparators */
#define COMP_BLANKINGSRCE_NONE (0x00000000U) /*!< No blanking source */
/* Blanking source for COMP2 */
#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for COMP2 */
#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for COMP2 */
#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for COMP2 */
/* Blanking source for COMP4 */
#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for COMP4 */
#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for COMP4 */
/* Blanking source for COMP6 */
#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for COMP6 */
#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for COMP6 */
/**
* @}
*/
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
/* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F302xE) ||\
defined(STM32F302xC)
/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F302xE/STM32F302xC Product devices)
* @{
*/
/* No blanking source can be selected for all comparators */
#define COMP_BLANKINGSRCE_NONE (0x00000000U) /*!< No blanking source */
/* Blanking source common for COMP1 and COMP2 */
#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for COMP1 and COMP2 */
/* Blanking source common for COMP1 and COMP2 */
#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for COMP1 and COMP2 */
/* Blanking source common for COMP1 and COMP2 */
#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for COMP1 and COMP2 */
/* Blanking source for COMP4 */
#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for COMP4 */
#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for COMP4 */
/* Blanking source for COMP6 */
#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for COMP6 */
#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for COMP6 */
/**
* @}
*/
#endif /* STM32F302xE || */
/* STM32F302xC */
#if defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303xC) || defined(STM32F358xx)
/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F303xE/STM32F398xx/STM32F303xC/STM32F358xx Product devices)
* @{
*/
/* No blanking source can be selected for all comparators */
#define COMP_BLANKINGSRCE_NONE (0x00000000U) /*!< No blanking source */
/* Blanking source common for COMP1, COMP2, COMP3 and COMP7 */
#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for COMP1, COMP2, COMP3 and COMP7 */
/* Blanking source common for COMP1 and COMP2 */
#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC5 selected as blanking source for COMP1 and COMP2 */
/* Blanking source common for COMP1, COMP2 and COMP5 */
#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC3 selected as blanking source for COMP1, COMP2 and COMP5 */
/* Blanking source common for COMP3 and COMP6 */
#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for COMP3 and COMP6 */
/* Blanking source common for COMP4, COMP5, COMP6 and COMP7 */
#define COMP_BLANKINGSRCE_TIM8OC5 COMP_CSR_COMPxBLANKING_1 /*!< TIM8 OC5 selected as blanking source for COMP4, COMP5, COMP6 and COMP7 */
/* Blanking source for COMP4 */
#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for COMP4 */
#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for COMP4 */
/* Blanking source common for COMP6 and COMP7 */
#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for COMP6 and COMP7 */
/**
* @}
*/
#endif /* STM32F303xE || STM32F398xx || */
/* STM32F303xC || STM32F358xx */
#if defined(STM32F373xC) || defined(STM32F378xx)
/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F373xC/STM32F378xx Product devices)
* @{
*/
/* No blanking source can be selected for all comparators */
#define COMP_BLANKINGSRCE_NONE (0x00000000U) /*!< No blanking source */
/**
* @}
*/
#endif /* STM32F373xC || STM32F378xx */
/** @defgroup COMP_Flag COMP Flag
* @{
*/
#if defined(STM32F373xC) || defined(STM32F378xx)
#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK /*!< Lock flag */
#else
#define COMP_FLAG_LOCK COMP_CSR_LOCK /*!< Lock flag */
#endif /* STM32F373xC || STM32F378xx */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup COMPEx_Exported_Macros COMP Extended Exported Macros
* @{
*/
#if defined(STM32F373xC) || defined(STM32F378xx)
/**
* @brief Enable the specified comparator.
* @param __HANDLE__ COMP handle.
* @retval None
*/
#define __HAL_COMP_ENABLE(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
} \
SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \
} while(0U)
/**
* @brief Disable the specified comparator.
* @param __HANDLE__ COMP handle.
* @retval None
*/
#define __HAL_COMP_DISABLE(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
} \
CLEAR_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \
} while(0U)
/**
* @brief Lock a comparator instance
* @param __HANDLE__ COMP handle
* @retval None.
*/
#define __HAL_COMP_LOCK(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
} \
SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxLOCK << regshift); \
} while(0U)
/** @brief Check whether the specified COMP flag is set or not.
* @param __HANDLE__ COMP Handle.
* @param __FLAG__ flag to check.
* This parameter can be one of the following values:
* @arg @ref COMP_FLAG_LOCK lock flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) \
(((__HANDLE__)->Instance == COMP1) ? (((__HANDLE__)->Instance->CSR & (__FLAG__)) == (__FLAG__)) \
(((__HANDLE__)->Instance->CSR & (uint32_t)((__FLAG__) << COMP_CSR_COMP2_SHIFT) == (__FLAG__))))
#else
/**
* @brief Enable the specified comparator.
* @param __HANDLE__ COMP handle.
* @retval None
*/
#define __HAL_COMP_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN)
/**
* @brief Disable the specified comparator.
* @param __HANDLE__ COMP handle.
* @retval None
*/
#define __HAL_COMP_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN)
/**
* @brief Lock a comparator instance
* @param __HANDLE__ COMP handle
* @retval None.
*/
#define __HAL_COMP_LOCK(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxLOCK)
/** @brief Check whether the specified COMP flag is set or not.
* @param __HANDLE__ COMP Handle.
* @param __FLAG__ flag to check.
* This parameter can be one of the following values:
* @arg @ref COMP_FLAG_LOCK lock flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->CSR & (__FLAG__)) == (__FLAG__))
#endif /* STM32F373xC || STM32F378xx */
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F373xC) || defined(STM32F378xx)
/**
* @brief Enable the COMP1 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1)
/**
* @brief Disable the COMP1 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1)
/**
* @brief Enable the COMP1 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1)
/**
* @brief Disable the COMP1 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1)
/**
* @brief Enable the COMP1 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE(); \
__HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the COMP1 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE(); \
__HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Enable the COMP1 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1)
/**
* @brief Disable the COMP1 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1)
/**
* @brief Generate a software interrupt on the COMP1 EXTI line.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP1)
/**
* @brief Enable the COMP1 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1)
/**
* @brief Disable the COMP1 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1)
/**
* @brief Check whether the COMP1 EXTI line flag is set or not.
* @retval RESET or SET
*/
#define __HAL_COMP_COMP1_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP1)
/**
* @brief Clear the COMP1 EXTI flag.
* @retval None
*/
#define __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP1)
#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
/* STM32F302xE || STM32F303xE || STM32F398xx || */
/* STM32F373xC || STM32F378xx */
/**
* @brief Enable the COMP2 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2)
/**
* @brief Disable the COMP2 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2)
/**
* @brief Enable the COMP2 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2)
/**
* @brief Disable the COMP2 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2)
/**
* @brief Enable the COMP2 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE(); \
__HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the COMP2 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE(); \
__HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Enable the COMP2 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2)
/**
* @brief Disable the COMP2 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2)
/**
* @brief Generate a software interrupt on the COMP2 EXTI line.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP2)
/**
* @brief Enable the COMP2 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2)
/**
* @brief Disable the COMP2 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2)
/**
* @brief Check whether the COMP2 EXTI line flag is set or not.
* @retval RESET or SET
*/
#define __HAL_COMP_COMP2_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP2)
/**
* @brief Clear the COMP2 EXTI flag.
* @retval None
*/
#define __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP2)
#if defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303xC) || defined(STM32F358xx)
/**
* @brief Enable the COMP3 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP3)
/**
* @brief Disable the COMP3 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP3)
/**
* @brief Enable the COMP3 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP3)
/**
* @brief Disable the COMP3 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP3)
/**
* @brief Enable the COMP3 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE(); \
__HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the COMP3 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE(); \
__HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Enable the COMP3 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP3)
/**
* @brief Disable the COMP3 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP3)
/**
* @brief Generate a software interrupt on the COMP3 EXTI line.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP3)
/**
* @brief Enable the COMP3 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP3)
/**
* @brief Disable the COMP3 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP3)
/**
* @brief Check whether the COMP3 EXTI line flag is set or not.
* @retval RESET or SET
*/
#define __HAL_COMP_COMP3_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP3)
/**
* @brief Clear the COMP3 EXTI flag.
* @retval None
*/
#define __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP3)
#endif /* STM32F303xE || STM32F398xx || */
/* STM32F303xC || STM32F358xx */
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/**
* @brief Enable the COMP4 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP4)
/**
* @brief Disable the COMP4 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP4)
/**
* @brief Enable the COMP4 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP4)
/**
* @brief Disable the COMP4 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP4)
/**
* @brief Enable the COMP4 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE(); \
__HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the COMP4 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE(); \
__HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Enable the COMP4 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP4)
/**
* @brief Disable the COMP4 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP4)
/**
* @brief Generate a software interrupt on the COMP4 EXTI line.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP4)
/**
* @brief Enable the COMP4 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP4)
/**
* @brief Disable the COMP4 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP4)
/**
* @brief Check whether the COMP4 EXTI line flag is set or not.
* @retval RESET or SET
*/
#define __HAL_COMP_COMP4_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP4)
/**
* @brief Clear the COMP4 EXTI flag.
* @retval None
*/
#define __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP4)
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
/* STM32F302xC || STM32F303xC || STM32F358xx || */
/* STM32F302xE || STM32F303xE || STM32F398xx || */
/* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303xC) || defined(STM32F358xx)
/**
* @brief Enable the COMP5 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP5)
/**
* @brief Disable the COMP5 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP5)
/**
* @brief Enable the COMP5 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP5)
/**
* @brief Disable the COMP5 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP5)
/**
* @brief Enable the COMP5 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE(); \
__HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the COMP5 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE(); \
__HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Enable the COMP5 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP5)
/**
* @brief Disable the COMP5 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP5)
/**
* @brief Generate a software interrupt on the COMP5 EXTI line.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP5)
/**
* @brief Enable the COMP5 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP5)
/**
* @brief Disable the COMP5 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP5)
/**
* @brief Check whether the COMP5 EXTI line flag is set or not.
* @retval RESET or SET
*/
#define __HAL_COMP_COMP5_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP5)
/**
* @brief Clear the COMP5 EXTI flag.
* @retval None
*/
#define __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP5)
#endif /* STM32F303xE || STM32F398xx || */
/* STM32F303xC || STM32F358xx */
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/**
* @brief Enable the COMP6 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, COMP_EXTI_LINE_COMP6)
/**
* @brief Disable the COMP6 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, COMP_EXTI_LINE_COMP6)
/**
* @brief Enable the COMP6 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, COMP_EXTI_LINE_COMP6)
/**
* @brief Disable the COMP6 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, COMP_EXTI_LINE_COMP6)
/**
* @brief Enable the COMP6 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE(); \
__HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the COMP6 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE(); \
__HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Enable the COMP6 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, COMP_EXTI_LINE_COMP6)
/**
* @brief Disable the COMP6 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, COMP_EXTI_LINE_COMP6)
/**
* @brief Generate a software interrupt on the COMP6 EXTI line.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, COMP_EXTI_LINE_COMP6)
/**
* @brief Enable the COMP6 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, COMP_EXTI_LINE_COMP6)
/**
* @brief Disable the COMP6 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, COMP_EXTI_LINE_COMP6)
/**
* @brief Check whether the COMP6 EXTI line flag is set or not.
* @retval RESET or SET
*/
#define __HAL_COMP_COMP6_EXTI_GET_FLAG() READ_BIT(EXTI->PR2, COMP_EXTI_LINE_COMP6)
/**
* @brief Clear the COMP6 EXTI flag.
* @retval None
*/
#define __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, COMP_EXTI_LINE_COMP6)
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
/* STM32F302xC || STM32F303xC || STM32F358xx || */
/* STM32F302xE || STM32F303xE || STM32F398xx || */
/* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303xC) || defined(STM32F358xx)
/**
* @brief Enable the COMP7 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, COMP_EXTI_LINE_COMP7)
/**
* @brief Disable the COMP7 EXTI line rising edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, COMP_EXTI_LINE_COMP7)
/**
* @brief Enable the COMP7 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, COMP_EXTI_LINE_COMP7)
/**
* @brief Disable the COMP7 EXTI line falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, COMP_EXTI_LINE_COMP7)
/**
* @brief Enable the COMP7 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE(); \
__HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable the COMP7 EXTI line rising & falling edge trigger.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE(); \
__HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Enable the COMP7 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, COMP_EXTI_LINE_COMP7)
/**
* @brief Disable the COMP7 EXTI line in interrupt mode.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, COMP_EXTI_LINE_COMP7)
/**
* @brief Generate a software interrupt on the COMP7 EXTI line.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, COMP_EXTI_LINE_COMP7)
/**
* @brief Enable the COMP7 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, COMP_EXTI_LINE_COMP7)
/**
* @brief Disable the COMP7 EXTI line in event mode.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, COMP_EXTI_LINE_COMP7)
/**
* @brief Check whether the COMP7 EXTI line flag is set or not.
* @retval RESET or SET
*/
#define __HAL_COMP_COMP7_EXTI_GET_FLAG() READ_BIT(EXTI->PR2, COMP_EXTI_LINE_COMP7)
/**
* @brief Clear the COMP7 EXTI flag.
* @retval None
*/
#define __HAL_COMP_COMP7_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, COMP_EXTI_LINE_COMP7)
#endif /* STM32F303xE || STM32F398xx || */
/* STM32F303xC || STM32F358xx */
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup COMPEx_Private_Constants COMP Extended Private Constants
* @{
*/
/** @defgroup COMPEx_ExtiLineEvent COMP Extended EXTI lines
* @{
*/
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
#define COMP_EXTI_LINE_COMP2 EXTI_IMR_MR22 /*!< External interrupt line 22 connected to COMP2 */
#define COMP_EXTI_LINE_COMP4 EXTI_IMR_MR30 /*!< External interrupt line 30 connected to COMP4 */
#define COMP_EXTI_LINE_COMP6 EXTI_IMR2_MR32 /*!< External interrupt line 32 connected to COMP6 */
#define COMP_EXTI_LINE_REG2_MASK EXTI_IMR2_MR32 /*!< Mask for External interrupt line control in register xxx2 */
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
/* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F302xE) || \
defined(STM32F302xC)
#define COMP_EXTI_LINE_COMP1 EXTI_IMR_MR21 /*!< External interrupt line 21 connected to COMP1 */
#define COMP_EXTI_LINE_COMP2 EXTI_IMR_MR22 /*!< External interrupt line 22 connected to COMP2 */
#define COMP_EXTI_LINE_COMP4 EXTI_IMR_MR30 /*!< External interrupt line 30 connected to COMP4 */
#define COMP_EXTI_LINE_COMP6 EXTI_IMR2_MR32 /*!< External interrupt line 32 connected to COMP6 */
#define COMP_EXTI_LINE_REG2_MASK EXTI_IMR2_MR32 /*!< Mask for External interrupt line control in register xxx2 */
#endif /* STM32F302xE || */
/* STM32F302xC */
#if defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303xC) || defined(STM32F358xx)
#define COMP_EXTI_LINE_COMP1 EXTI_IMR_MR21 /*!< External interrupt line 21 connected to COMP1 */
#define COMP_EXTI_LINE_COMP2 EXTI_IMR_MR22 /*!< External interrupt line 22 connected to COMP2 */
#define COMP_EXTI_LINE_COMP3 EXTI_IMR_MR29 /*!< External interrupt line 29 connected to COMP3 */
#define COMP_EXTI_LINE_COMP4 EXTI_IMR_MR30 /*!< External interrupt line 30 connected to COMP4 */
#define COMP_EXTI_LINE_COMP5 EXTI_IMR_MR31 /*!< External interrupt line 31 connected to COMP5 */
#define COMP_EXTI_LINE_COMP6 EXTI_IMR2_MR32 /*!< External interrupt line 32 connected to COMP6 */
#define COMP_EXTI_LINE_COMP7 EXTI_IMR2_MR33 /*!< External interrupt line 33 connected to COMP7 */
#define COMP_EXTI_LINE_REG2_MASK (EXTI_IMR2_MR33 | EXTI_IMR2_MR32) /*!< Mask for External interrupt line control in register xxx2 */
#endif /* STM32F303xE || STM32F398xx || */
/* STM32F303xC || STM32F358xx */
#if defined(STM32F373xC) || defined(STM32F378xx)
#define COMP_EXTI_LINE_COMP1 EXTI_IMR_MR21 /*!< External interrupt line 21 connected to COMP1 */
#define COMP_EXTI_LINE_COMP2 EXTI_IMR_MR22 /*!< External interrupt line 22 connected to COMP2 */
#endif /* STM32F373xC || STM32F378xx */
/**
* @}
*/
/** @defgroup COMPEx_Misc COMP Extended miscellaneous defines
* @{
*/
/* CSR masks redefinition for internal use */
#define COMP_CSR_COMPxINSEL_MASK COMP_CSR_COMPxINSEL /*!< COMP_CSR_COMPxINSEL Mask */
#define COMP_CSR_COMPxOUTSEL_MASK COMP_CSR_COMPxOUTSEL /*!< COMP_CSR_COMPxOUTSEL Mask */
#define COMP_CSR_COMPxPOL_MASK COMP_CSR_COMPxPOL /*!< COMP_CSR_COMPxPOL Mask */
#if defined(STM32F373xC) || defined(STM32F378xx)
/* CSR register reset value */
#define COMP_CSR_RESET_VALUE (0x00000000U)
#define COMP_CSR_RESET_PARAMETERS_MASK (0x00003FFFU)
#define COMP_CSR_UPDATE_PARAMETERS_MASK (0x00003FFEU)
/* CSR COMP1/COMP2 shift */
#define COMP_CSR_COMP1_SHIFT 0U
#define COMP_CSR_COMP2_SHIFT 16U
#else
/* CSR register reset value */
#define COMP_CSR_RESET_VALUE (0x00000000U)
#endif /* STM32F373xC || STM32F378xx */
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
#define COMP_CSR_COMPxNONINSEL_MASK (COMP2_CSR_COMP2INPDAC) /*!< COMP_CSR_COMPxNONINSEL mask */
#define COMP_CSR_COMPxWNDWEN_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxMODE_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxHYST_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
#define COMP_CSR_COMPxNONINSEL_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxWNDWEN_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxMODE_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxHYST_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
#define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMPxNONINSEL | COMP1_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
#define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */
#define COMP_CSR_COMPxMODE_MASK COMP_CSR_COMPxMODE /*!< COMP_CSR_COMPxMODE Mask */
#define COMP_CSR_COMPxHYST_MASK COMP_CSR_COMPxHYST /*!< COMP_CSR_COMPxHYST Mask */
#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
#define COMP_CSR_COMPxNONINSEL_MASK (COMP1_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
#define COMP_CSR_COMPxWNDWEN_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxMODE_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxHYST_MASK (0x00000000U) /*!< Mask empty: feature not available */
#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
#if defined(STM32F373xC) || defined(STM32F378xx)
#define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
#define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */
#define COMP_CSR_COMPxMODE_MASK COMP_CSR_COMPxMODE /*!< COMP_CSR_COMPxMODE Mask */
#define COMP_CSR_COMPxHYST_MASK COMP_CSR_COMPxHYST /*!< COMP_CSR_COMPxHYST Mask */
#define COMP_CSR_COMPxBLANKING_MASK (0x00000000U) /*!< Mask empty: feature not available */
#endif /* STM32F373xC || STM32F378xx */
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup COMPEx_Private_Macros COMP Extended Private Macros
* @{
*/
/** @defgroup COMP_GET_EXTI_LINE COMP Extended Private macro to get the EXTI line associated with a comparator handle
* @{
*/
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
/**
* @brief Get the specified EXTI line for a comparator instance
* @param __INSTANCE__ specifies the COMP instance.
* @retval value of @ref COMPEx_ExtiLineEvent
*/
#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2 : \
((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4 : \
COMP_EXTI_LINE_COMP6)
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
/* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F302xE) || \
defined(STM32F302xC)
/**
* @brief Get the specified EXTI line for a comparator instance
* @param __INSTANCE__ specifies the COMP instance.
* @retval value of @ref COMPEx_ExtiLineEvent
*/
#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 : \
((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2 : \
((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4 : \
COMP_EXTI_LINE_COMP6)
#endif /* STM32F302xE || */
/* STM32F302xC */
#if defined(STM32F303xE) || defined(STM32F398xx) || \
defined(STM32F303xC) || defined(STM32F358xx)
/**
* @brief Get the specified EXTI line for a comparator instance
* @param __INSTANCE__ specifies the COMP instance.
* @retval value of @ref COMPEx_ExtiLineEvent
*/
#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 : \
((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2 : \
((__INSTANCE__) == COMP3) ? COMP_EXTI_LINE_COMP3 : \
((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4 : \
((__INSTANCE__) == COMP5) ? COMP_EXTI_LINE_COMP5 : \
((__INSTANCE__) == COMP6) ? COMP_EXTI_LINE_COMP6 : \
COMP_EXTI_LINE_COMP7)
#endif /* STM32F303xE || STM32F398xx || */
/* STM32F303xC || STM32F358xx */
#if defined(STM32F373xC) || defined(STM32F378xx)
/**
* @brief Get the specified EXTI line for a comparator instance
* @param __INSTANCE__ specifies the COMP instance.
* @retval value of @ref COMPEx_ExtiLineEvent
*/
#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 : \
COMP_EXTI_LINE_COMP2)
#endif /* STM32F373xC || STM32F378xx */
/**
* @}
*/
/** @defgroup COMPEx_Private_Macros_Misc COMP Extended miscellaneous private macros
* @{
*/
#if defined(STM32F373xC) || defined(STM32F378xx)
/**
* @brief Init a comparator instance
* @param __HANDLE__ COMP handle
* @note The common output selection is checked versus the COMP instance to set the right output configuration
* @retval None.
*/
#define COMP_INIT(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
uint32_t compoutput = (__HANDLE__)->Init.Output & COMP_CSR_COMPxOUTSEL_MASK; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
} \
\
MODIFY_REG(COMP->CSR, \
(COMP_CSR_COMPxINSEL | COMP_CSR_COMPxNONINSEL_MASK | \
COMP_CSR_COMPxOUTSEL | COMP_CSR_COMPxPOL | \
COMP_CSR_COMPxHYST | COMP_CSR_COMPxMODE) << regshift, \
((__HANDLE__)->Init.InvertingInput | \
(__HANDLE__)->Init.NonInvertingInput | \
compoutput | \
(__HANDLE__)->Init.OutputPol | \
(__HANDLE__)->Init.Hysteresis | \
(__HANDLE__)->Init.Mode) << regshift); \
\
if((__HANDLE__)->Init.WindowMode != COMP_WINDOWMODE_DISABLE) \
{ \
COMP->CSR |= COMP_CSR_WNDWEN; \
} \
} while(0U)
/**
* @brief DeInit a comparator instance
* @param __HANDLE__ COMP handle
* @retval None.
*/
#define COMP_DEINIT(__HANDLE__) \
do { \
uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
\
if((__HANDLE__)->Instance == COMP2) \
{ \
regshift = COMP_CSR_COMP2_SHIFT; \
} \
MODIFY_REG(COMP->CSR, \
COMP_CSR_RESET_PARAMETERS_MASK << regshift, \
COMP_CSR_RESET_VALUE << regshift); \
} while(0U)
/**
* @brief Enable the Exti Line rising edge trigger.
* @param __EXTILINE__ specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_RISING_ENABLE(__EXTILINE__) SET_BIT(EXTI->RTSR, (__EXTILINE__))
/**
* @brief Disable the Exti Line rising edge trigger.
* @param __EXTILINE__ specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_RISING_DISABLE(__EXTILINE__) CLEAR_BIT(EXTI->RTSR, (__EXTILINE__))
/**
* @brief Enable the Exti Line falling edge trigger.
* @param __EXTILINE__ specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_FALLING_ENABLE(__EXTILINE__) SET_BIT(EXTI->FTSR, (__EXTILINE__))
/**
* @brief Disable the Exti Line falling edge trigger.
* @param __EXTILINE__ specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_FALLING_DISABLE(__EXTILINE__) CLEAR_BIT(EXTI->FTSR, (__EXTILINE__))
/**
* @brief Enable the COMP Exti Line interrupt generation.
* @param __EXTILINE__ specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_ENABLE_IT(__EXTILINE__) SET_BIT(EXTI->IMR, (__EXTILINE__))
/**
* @brief Disable the COMP Exti Line interrupt generation.
* @param __EXTILINE__ specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_DISABLE_IT(__EXTILINE__) CLEAR_BIT(EXTI->IMR, (__EXTILINE__))
/**
* @brief Enable the COMP Exti Line event generation.
* @param __EXTILINE__ specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_ENABLE_EVENT(__EXTILINE__) SET_BIT(EXTI->EMR, (__EXTILINE__))
/**
* @brief Disable the COMP Exti Line event generation.
* @param __EXTILINE__ specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_DISABLE_EVENT(__EXTILINE__) CLEAR_BIT(EXTI->EMR, (__EXTILINE__))
/**
* @brief Check whether the specified EXTI line flag is set or not.
* @param __FLAG__ specifies the COMP Exti sources to be checked.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval The state of __FLAG__ (SET or RESET).
*/
#define COMP_EXTI_GET_FLAG(__FLAG__) READ_BIT(EXTI->PR, (__FLAG__))
/**
* @brief Clear the COMP Exti flags.
* @param __FLAG__ specifies the COMP Exti sources to be cleared.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_CLEAR_FLAG(__FLAG__) WRITE_REG(EXTI->PR, (__FLAG__))
#else /* STM32F30x, STM32F32xx, STM32F35x, STM32F39x, STM32F33x */
/**
* @brief Init a comparator instance
* @param __HANDLE__ COMP handle
* @retval None.
*/
#define COMP_INIT(__HANDLE__) \
do { \
__IO uint32_t csrreg = 0U; \
\
csrreg = READ_REG((__HANDLE__)->Instance->CSR); \
MODIFY_REG(csrreg, COMP_CSR_COMPxINSEL_MASK, (__HANDLE__)->Init.InvertingInput); \
MODIFY_REG(csrreg, COMP_CSR_COMPxNONINSEL_MASK, (__HANDLE__)->Init.NonInvertingInput); \
MODIFY_REG(csrreg, COMP_CSR_COMPxBLANKING_MASK, (__HANDLE__)->Init.BlankingSrce); \
MODIFY_REG(csrreg, COMP_CSR_COMPxOUTSEL_MASK, (__HANDLE__)->Init.Output & COMP_CSR_COMPxOUTSEL_MASK); \
MODIFY_REG(csrreg, COMP_CSR_COMPxPOL_MASK, (__HANDLE__)->Init.OutputPol); \
MODIFY_REG(csrreg, COMP_CSR_COMPxHYST_MASK, (__HANDLE__)->Init.Hysteresis); \
MODIFY_REG(csrreg, COMP_CSR_COMPxMODE_MASK, (__HANDLE__)->Init.Mode); \
MODIFY_REG(csrreg, COMP_CSR_COMPxWNDWEN_MASK, (__HANDLE__)->Init.WindowMode); \
WRITE_REG((__HANDLE__)->Instance->CSR, csrreg); \
} while(0U)
/**
* @brief DeInit a comparator instance
* @param __HANDLE__ COMP handle
* @retval None.
*/
#define COMP_DEINIT(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->CSR, COMP_CSR_RESET_VALUE)
/**
* @brief Enable the Exti Line rising edge trigger.
* @param __EXTILINE__ specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_RISING_ENABLE(__EXTILINE__) ((((__EXTILINE__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? SET_BIT(EXTI->RTSR2, (__EXTILINE__)) : SET_BIT(EXTI->RTSR, (__EXTILINE__)))
/**
* @brief Disable the Exti Line rising edge trigger.
* @param __EXTILINE__ specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_RISING_DISABLE(__EXTILINE__) ((((__EXTILINE__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? CLEAR_BIT(EXTI->RTSR2, (__EXTILINE__)) : CLEAR_BIT(EXTI->RTSR, (__EXTILINE__)))
/**
* @brief Enable the Exti Line falling edge trigger.
* @param __EXTILINE__ specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_FALLING_ENABLE(__EXTILINE__) ((((__EXTILINE__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? SET_BIT(EXTI->FTSR2, (__EXTILINE__)) : SET_BIT(EXTI->FTSR, (__EXTILINE__)))
/**
* @brief Disable the Exti Line falling edge trigger.
* @param __EXTILINE__ specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_FALLING_DISABLE(__EXTILINE__) ((((__EXTILINE__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? CLEAR_BIT(EXTI->FTSR2, (__EXTILINE__)) : CLEAR_BIT(EXTI->FTSR, (__EXTILINE__)))
/**
* @brief Enable the COMP Exti Line interrupt generation.
* @param __EXTILINE__ specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_ENABLE_IT(__EXTILINE__) ((((__EXTILINE__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? SET_BIT(EXTI->IMR2, (__EXTILINE__)) : SET_BIT(EXTI->IMR, (__EXTILINE__)))
/**
* @brief Disable the COMP Exti Line interrupt generation.
* @param __EXTILINE__ specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_DISABLE_IT(__EXTILINE__) ((((__EXTILINE__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? CLEAR_BIT(EXTI->IMR2, (__EXTILINE__)) : CLEAR_BIT(EXTI->IMR, (__EXTILINE__)))
/**
* @brief Enable the COMP Exti Line event generation.
* @param __EXTILINE__ specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_ENABLE_EVENT(__EXTILINE__) ((((__EXTILINE__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? SET_BIT(EXTI->EMR2, (__EXTILINE__)) : SET_BIT(EXTI->EMR, (__EXTILINE__)))
/**
* @brief Disable the COMP Exti Line event generation.
* @param __EXTILINE__ specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_DISABLE_EVENT(__EXTILINE__) ((((__EXTILINE__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? CLEAR_BIT(EXTI->EMR2, (__EXTILINE__)) : CLEAR_BIT(EXTI->EMR, (__EXTILINE__)))
/**
* @brief Check whether the specified EXTI line flag is set or not.
* @param __FLAG__ specifies the COMP Exti sources to be checked.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval The state of __FLAG__ (SET or RESET).
*/
#define COMP_EXTI_GET_FLAG(__FLAG__) ((((__FLAG__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? READ_BIT(EXTI->PR2, (__FLAG__)) : READ_BIT(EXTI->PR, (__FLAG__)))
/**
* @brief Clear the COMP Exti flags.
* @param __FLAG__ specifies the COMP Exti sources to be cleared.
* This parameter can be a value of @ref COMPEx_ExtiLineEvent
* @retval None.
*/
#define COMP_EXTI_CLEAR_FLAG(__FLAG__) ((((__FLAG__) & COMP_EXTI_LINE_REG2_MASK) != RESET) ? WRITE_REG(EXTI->PR2, (__FLAG__)) : WRITE_REG(EXTI->PR, (__FLAG__)))
#endif /* STM32F373xC || STM32F378xx */
/**
* @brief Manage inverting input comparator inverting input connected to a GPIO
* for STM32F302x, STM32F32xx, STM32F33x.
* - On devices STM32F302x, STM32F32xx, STM32F33x, there is
* only 1 comparator inverting input connected to a GPIO.
* Legacy definition of literal COMP_INVERTINGINPUT_IO1
* was initially the only selection, but depending on
* comparator instance it corresponds to COMP_INVERTINGINPUT_IO2
* (for instances COMP4, COMP6).
* Since, COMP_INVERTINGINPUT_IO2 has been created and this macro
* selects the correct literal COMP_INVERTINGINPUT_IOx in function
* of comparator instance.
* - On other STM32F3 devices, this macro performs no action.
* @param __COMP_INSTANCE__ COMP instance
* @param __INVERTINGINPUT__ COMP inverting input
* @retval None.
*/
#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
#define COMP_INVERTINGINPUT_SELECTION(__COMP_INSTANCE__, __INVERTINGINPUT__) \
(((__INVERTINGINPUT__) != COMP_INVERTINGINPUT_IO1) \
? ( \
(__INVERTINGINPUT__) \
) \
: \
(((__COMP_INSTANCE__) == COMP2) \
? ( \
(COMP_INVERTINGINPUT_IO1) \
) \
: \
( \
(COMP_INVERTINGINPUT_IO2) \
) \
) \
)
#else
#define COMP_INVERTINGINPUT_SELECTION(__COMP_INSTANCE__, __INVERTINGINPUT__) \
(__INVERTINGINPUT__)
#endif
/**
* @}
*/
/** @defgroup COMPEx_IS_COMP_Definitions COMP Extended Private macros to check input parameters
* @{
*/
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
((INPUT) == COMP_INVERTINGINPUT_IO1))
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
/* STM32F301x6/x8, STM32F302x6/x8, STM32F318xx devices comparator instances non inverting source values */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
((((INSTANCE) == COMP2) && \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
|| \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
#define IS_COMP_WINDOWMODE(WINDOWMODE) ((WINDOWMODE) == (WINDOWMODE)) /*!< Not available: check always true */
#define IS_COMP_MODE(MODE) ((MODE) == (MODE)) /*!< Not available: check always true */
#define IS_COMP_HYSTERESIS(HYSTERESIS) ((HYSTERESIS) == (HYSTERESIS)) /*!< Not available: check always true */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))
#define IS_COMP_OUTPUT_INSTANCE(INSTANCE, OUTPUT) \
((((INSTANCE) == COMP2) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR))) \
|| \
(((INSTANCE) == COMP4) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR))) \
|| \
(((INSTANCE) == COMP6) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))))
#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
/* STM32F301x6/x8, STM32F302x6/x8, STM32F303x6/x8, STM32F334x4/6U/8U, STM32F318xx/STM32F328xx devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
((((INSTANCE) == COMP2) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP4) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
|| \
(((INSTANCE) == COMP6) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
((INPUT) == COMP_INVERTINGINPUT_IO1) || \
((INPUT) == COMP_INVERTINGINPUT_IO2) || \
((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1))
/*!< Non inverting input not available */
#define IS_COMP_NONINVERTINGINPUT(INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */
#define IS_COMP_WINDOWMODE(WINDOWMODE) ((WINDOWMODE) == (WINDOWMODE)) /*!< Not available: check always true */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))
#define IS_COMP_OUTPUT_INSTANCE(INSTANCE, OUTPUT) \
((((INSTANCE) == COMP2) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))) \
|| \
(((INSTANCE) == COMP4) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR))) \
|| \
(((INSTANCE) == COMP6) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))))
#define IS_COMP_MODE(MODE) ((MODE) == (MODE)) /*!< Not available: check always true */
#define IS_COMP_HYSTERESIS(HYSTERESIS) ((HYSTERESIS) == (HYSTERESIS)) /*!< Not available: check always true */
#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
/* STM32F301x6/x8, STM32F302x6/x8, STM32F303x6/x8, STM32F334x4/6U/8U, STM32F318xx/STM32F328xx devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
((((INSTANCE) == COMP2) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP4) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
|| \
(((INSTANCE) == COMP6) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
((INPUT) == COMP_INVERTINGINPUT_IO1) || \
((INPUT) == COMP_INVERTINGINPUT_IO2))
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
/* STM32F302xB/xC, STM32F303xB/xC, STM32F358xx devices comparator instances non inverting source values */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
((((INSTANCE) == COMP1) && \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
|| \
((((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_IO2))))
#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLE) || \
((WINDOWMODE) == COMP_WINDOWMODE_ENABLE))
#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
((MODE) == COMP_MODE_MEDIUMSPEED) || \
((MODE) == COMP_MODE_LOWPOWER) || \
((MODE) == COMP_MODE_ULTRALOWPOWER))
#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
#if defined(STM32F302xC)
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4))
#define IS_COMP_OUTPUT_INSTANCE(INSTANCE, OUTPUT) \
((((INSTANCE) == COMP1) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))) \
|| \
(((INSTANCE) == COMP2) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))) \
|| \
(((INSTANCE) == COMP4) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR))) \
|| \
(((INSTANCE) == COMP6) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))))
#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
/* STM32F302xB/STM32F302xC/STM32F302xE devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
(((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP4) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
|| \
(((INSTANCE) == COMP6) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
#endif /* STM32F302xC */
#if defined(STM32F303xC) || defined(STM32F358xx)
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR))
#define IS_COMP_OUTPUT_INSTANCE(INSTANCE, OUTPUT) \
((((INSTANCE) == COMP1) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))) \
|| \
(((INSTANCE) == COMP2) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))) \
|| \
(((INSTANCE) == COMP3) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15BKIN))) \
|| \
(((INSTANCE) == COMP4) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR))) \
|| \
(((INSTANCE) == COMP5) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17IC1))) \
|| \
(((INSTANCE) == COMP6) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))) \
|| \
(((INSTANCE) == COMP7) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR))))
#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
/* STM32F303xE/STM32F398xx/STM32F303xB/STM32F303xC/STM32F358xx devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
(((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP3) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4))) \
|| \
(((INSTANCE) == COMP4) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
|| \
(((INSTANCE) == COMP5) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP6) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))) \
|| \
(((INSTANCE) == COMP7) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
#endif /* STM32F303xC || STM32F358xx */
#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
((INPUT) == COMP_INVERTINGINPUT_IO1) || \
((INPUT) == COMP_INVERTINGINPUT_IO2))
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
/* STM32F302xE/STM32F303xE/STM32F398xx devices comparator instances non inverting source values */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
((((INSTANCE) == COMP1) && \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
|| \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
#define IS_COMP_WINDOWMODE(WINDOWMODE) ((WINDOWMODE) == (WINDOWMODE)) /*!< Not available: check always true */
#define IS_COMP_MODE(MODE) ((MODE) == (MODE)) /*!< Not available: check always true */
#define IS_COMP_HYSTERESIS(HYSTERESIS) ((HYSTERESIS) == (HYSTERESIS)) /*!< Not available: check always true */
#if defined(STM32F302xE)
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4))
#define IS_COMP_OUTPUT_INSTANCE(INSTANCE, OUTPUT) \
((((INSTANCE) == COMP1) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))) \
|| \
(((INSTANCE) == COMP2) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))) \
|| \
(((INSTANCE) == COMP4) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR))) \
|| \
(((INSTANCE) == COMP6) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))))
#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
/* STM32F302xB/STM32F302xC/STM32F302xE devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
(((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP4) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
|| \
(((INSTANCE) == COMP6) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
#endif /* STM32F302xE */
#if defined(STM32F303xE) || defined(STM32F398xx)
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM20OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR))
#define IS_COMP_OUTPUT_INSTANCE(INSTANCE, OUTPUT) \
((((INSTANCE) == COMP1) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))) \
|| \
(((INSTANCE) == COMP2) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM20OCREFCLR))) \
|| \
(((INSTANCE) == COMP3) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM15BKIN))) \
|| \
(((INSTANCE) == COMP4) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR))) \
|| \
(((INSTANCE) == COMP5) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17IC1))) \
|| \
(((INSTANCE) == COMP6) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))) \
|| \
(((INSTANCE) == COMP7) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \
((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR))))
#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
/* STM32F303xE/STM32F398xx/STM32F303xB/STM32F303xC/STM32F358xx devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
(((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP3) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4))) \
|| \
(((INSTANCE) == COMP4) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
|| \
(((INSTANCE) == COMP5) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
|| \
(((INSTANCE) == COMP6) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))) \
|| \
(((INSTANCE) == COMP7) && \
(((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
#endif /* STM32F303xE || STM32F398xx */
#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
#if defined(STM32F373xC) || defined(STM32F378xx)
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
((INPUT) == COMP_INVERTINGINPUT_IO1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1))
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
/* STM32F373xB/xC, STM32F378xx devices comparator instances non inverting source values */
#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
((((INSTANCE) == COMP1) && \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
|| \
(((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLE) || \
((WINDOWMODE) == COMP_WINDOWMODE_ENABLE))
#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
((MODE) == COMP_MODE_MEDIUMSPEED) || \
((MODE) == COMP_MODE_LOWPOWER) || \
((MODE) == COMP_MODE_ULTRALOWPOWER))
#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP1_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_COMP1_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP2_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_COMP2_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM5IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM5OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM16BKIN))
#define IS_COMP_OUTPUT_INSTANCE(INSTANCE, OUTPUT) \
((((INSTANCE) == COMP1) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP1_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_COMP1_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM5IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM5OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM15BKIN))) \
|| \
(((INSTANCE) == COMP2) && \
(((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_COMP2_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_COMP2_TIM3OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM4OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM16BKIN))))
#define IS_COMP_BLANKINGSRCE(SOURCE) ((SOURCE) == (SOURCE)) /*!< Not available: check always true */
/* STM32F373xB/STM32F373xC/STM32F378xx devices comparator instances blanking source values */
#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE))
#endif /* STM32F373xC || STM32F378xx */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F3xx_HAL_COMP_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/