| /* |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| */ |
| package org.eclipse.aether; |
| |
| /** |
| * The keys and defaults for common configuration properties. |
| * |
| * @see RepositorySystemSession#getConfigProperties() |
| */ |
| public final class ConfigurationProperties { |
| |
| /** |
| * Prefix for all configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_AETHER = "aether."; |
| |
| /** |
| * Prefix for repository system related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_SYSTEM = PREFIX_AETHER + "system."; |
| |
| /** |
| * Prefix for sync context related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_SYNC_CONTEXT = PREFIX_AETHER + "syncContext."; |
| |
| /** |
| * Prefix for connector related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_CONNECTOR = PREFIX_AETHER + "connector."; |
| |
| /** |
| * Prefix for layout related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_LAYOUT = PREFIX_AETHER + "layout."; |
| |
| /** |
| * Prefix for checksum related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_CHECKSUMS = PREFIX_AETHER + "checksums."; |
| |
| /** |
| * Prefix for local repository manager related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_LRM = PREFIX_AETHER + "lrm."; |
| |
| /** |
| * Prefix for generator related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_GENERATOR = PREFIX_AETHER + "generator."; |
| |
| /** |
| * Prefix for util related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.10 |
| */ |
| public static final String PREFIX_UTIL = PREFIX_AETHER + "util."; |
| |
| /** |
| * Prefix for transport related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_TRANSPORT = PREFIX_AETHER + "transport."; |
| |
| /** |
| * Prefix for HTTP protocol related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_TRANSPORT_HTTP = PREFIX_TRANSPORT + "http."; |
| |
| /** |
| * Prefix for HTTPS protocol related configurations. <em>For internal use only.</em> |
| * |
| * @since 2.0.0 |
| */ |
| public static final String PREFIX_TRANSPORT_HTTPS = PREFIX_TRANSPORT + "https."; |
| |
| /** |
| * The prefix for properties that control the priority of pluggable extensions like transporters. For example, for |
| * an extension with the fully qualified class name "org.eclipse.MyExtensionFactory", the configuration properties |
| * "aether.priority.org.eclipse.MyExtensionFactory", "aether.priority.MyExtensionFactory" and |
| * "aether.priority.MyExtension" will be consulted for the priority, in that order (obviously, the last key is only |
| * tried if the class name ends with "Factory"). The corresponding value is a float and the special value |
| * {@link Float#NaN} or "NaN" (case-sensitive) can be used to disable the extension. |
| */ |
| public static final String PREFIX_PRIORITY = PREFIX_AETHER + "priority."; |
| |
| /** |
| * A flag indicating whether the priorities of pluggable extensions are implicitly given by their iteration order |
| * such that the first extension has the highest priority. If set, an extension's built-in priority as well as any |
| * corresponding {@code aether.priority.*} configuration properties are ignored when searching for a suitable |
| * implementation among the available extensions. This priority mode is meant for cases where the application will |
| * present/inject extensions in the desired search order. |
| * |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Boolean} |
| * @configurationDefaultValue {@link #DEFAULT_IMPLICIT_PRIORITIES} |
| * @configurationRepoIdSuffix No |
| */ |
| public static final String IMPLICIT_PRIORITIES = PREFIX_PRIORITY + "implicit"; |
| |
| /** |
| * The default extension priority mode if {@link #IMPLICIT_PRIORITIES} isn't set. |
| */ |
| public static final boolean DEFAULT_IMPLICIT_PRIORITIES = false; |
| |
| /** |
| * A flag indicating whether the created ordered components should be cached in session. |
| * |
| * @since 2.0.0 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Boolean} |
| * @configurationDefaultValue {@link #DEFAULT_CACHED_PRIORITIES} |
| * @configurationRepoIdSuffix No |
| */ |
| public static final String CACHED_PRIORITIES = PREFIX_PRIORITY + "cached"; |
| |
| /** |
| * The priority to use for a certain extension class. {@code <class>} can either be the fully qualified |
| * name or the simple name of a class. If the class name ends with Factory that suffix could optionally be left out. |
| * This configuration is used by {@code org.eclipse.aether.internal.impl.PrioritizedComponents} internal utility |
| * to sort classes by priority. This is reusable utility (so an extension can make use of it), but by default |
| * in "vanilla" Resolver following classes are sorted: |
| * <ul> |
| * <li>{@code org.eclipse.aether.spi.localrepo.LocalRepositoryManagerFactory}</li> |
| * <li>{@code org.eclipse.aether.spi.connector.RepositoryConnectorFactory}</li> |
| * <li>{@code org.eclipse.aether.spi.connector.layout.RepositoryLayoutFactory}</li> |
| * <li>{@code org.eclipse.aether.spi.connector.transport.TransporterFactory}</li> |
| * <li>{@code org.eclipse.aether.spi.artifact.decorator.ArtifactDecoratorFactory}</li> |
| * <li>{@code org.eclipse.aether.spi.artifact.generator.ArtifactGeneratorFactory}</li> |
| * <li>{@code org.eclipse.aether.impl.MetadataGeneratorFactory}</li> |
| * </ul> |
| * |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Float} |
| * @configurationRepoIdSuffix No |
| */ |
| public static final String CLASS_PRIORITIES = PREFIX_PRIORITY + "<class>"; |
| |
| /** |
| * The default caching of priority components if {@link #CACHED_PRIORITIES} isn't set. Default value is {@code true}. |
| * |
| * @since 2.0.0 |
| */ |
| public static final boolean DEFAULT_CACHED_PRIORITIES = true; |
| |
| /** |
| * A flag indicating whether interaction with the user is allowed. |
| * |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Boolean} |
| * @configurationDefaultValue {@link #DEFAULT_INTERACTIVE} |
| * @configurationRepoIdSuffix No |
| */ |
| public static final String INTERACTIVE = PREFIX_AETHER + "interactive"; |
| |
| /** |
| * The default interactive mode if {@link #INTERACTIVE} isn't set. |
| */ |
| public static final boolean DEFAULT_INTERACTIVE = false; |
| |
| /** |
| * The user agent that repository connectors should report to servers. |
| * |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.String} |
| * @configurationDefaultValue {@link #DEFAULT_USER_AGENT} |
| * @configurationRepoIdSuffix No |
| */ |
| public static final String USER_AGENT = PREFIX_TRANSPORT_HTTP + "userAgent"; |
| |
| /** |
| * The default user agent to use if {@link #USER_AGENT} isn't set. |
| */ |
| public static final String DEFAULT_USER_AGENT = "Aether"; |
| |
| /** |
| * The maximum amount of time (in milliseconds) to wait for a successful connection to a remote server. Non-positive |
| * values indicate no timeout. |
| * |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Integer} |
| * @configurationDefaultValue {@link #DEFAULT_CONNECT_TIMEOUT} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String CONNECT_TIMEOUT = PREFIX_TRANSPORT_HTTP + "connectTimeout"; |
| |
| /** |
| * The default connect timeout to use if {@link #CONNECT_TIMEOUT} isn't set. |
| */ |
| public static final int DEFAULT_CONNECT_TIMEOUT = 30 * 1000; |
| |
| /** |
| * The maximum amount of time (in milliseconds) to wait for remaining data to arrive from a remote server. Note that |
| * this timeout does not restrict the overall duration of a request, it only restricts the duration of inactivity |
| * between consecutive data packets. Non-positive values indicate no timeout. |
| * |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Integer} |
| * @configurationDefaultValue {@link #DEFAULT_REQUEST_TIMEOUT} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String REQUEST_TIMEOUT = PREFIX_TRANSPORT_HTTP + "requestTimeout"; |
| |
| /** |
| * The default request timeout to use if {@link #REQUEST_TIMEOUT} isn't set. |
| */ |
| public static final int DEFAULT_REQUEST_TIMEOUT = 1800 * 1000; |
| |
| /** |
| * The request headers to use for HTTP-based repository connectors. The headers are specified using a |
| * {@code Map<String, String>}, mapping a header name to its value. Besides this general key, clients may also |
| * specify headers for a specific remote repository by appending the suffix {@code .<repoId>} to this key when |
| * storing the headers map. The repository-specific headers map is supposed to be complete, i.e. is not merged with |
| * the general headers map. |
| * |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.util.Map} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_HEADERS = PREFIX_TRANSPORT_HTTP + "headers"; |
| |
| /** |
| * The encoding/charset to use when exchanging credentials with HTTP servers. Besides this general key, clients may |
| * also specify the encoding for a specific remote repository by appending the suffix {@code .<repoId>} to this key |
| * when storing the charset name. |
| * |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.String} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_CREDENTIAL_ENCODING} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_CREDENTIAL_ENCODING = PREFIX_TRANSPORT_HTTP + "credentialEncoding"; |
| |
| /** |
| * The default encoding/charset to use if {@link #HTTP_CREDENTIAL_ENCODING} isn't set. |
| */ |
| public static final String DEFAULT_HTTP_CREDENTIAL_ENCODING = "ISO-8859-1"; |
| |
| /** |
| * The maximum number of times a request to a remote server should be retried in case of an error. |
| * |
| * @since 1.9.6 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Integer} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_RETRY_HANDLER_COUNT} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_RETRY_HANDLER_COUNT = PREFIX_TRANSPORT_HTTP + "retryHandler.count"; |
| |
| /** |
| * The default number of retries to use if {@link #HTTP_RETRY_HANDLER_COUNT} isn't set. |
| * |
| * @since 1.9.6 |
| */ |
| public static final int DEFAULT_HTTP_RETRY_HANDLER_COUNT = 3; |
| |
| /** |
| * The initial retry interval in millis of request to a remote server should be waited in case of |
| * "too many requests" (HTTP codes 429 and 503). Accepts long as milliseconds. This value is used if remote server |
| * does not use {@code Retry-After} header, in which case Server value is obeyed. |
| * |
| * @since 1.9.16 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Long} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_RETRY_HANDLER_INTERVAL} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_RETRY_HANDLER_INTERVAL = PREFIX_TRANSPORT_HTTP + "retryHandler.interval"; |
| |
| /** |
| * The default initial retry interval to use if {@link #HTTP_RETRY_HANDLER_INTERVAL} isn't set. |
| * Default value 5000ms. |
| * |
| * @since 1.9.16 |
| */ |
| public static final long DEFAULT_HTTP_RETRY_HANDLER_INTERVAL = 5000L; |
| |
| /** |
| * The maximum retry interval in millis of request to a remote server above which the request should be aborted |
| * instead. In theory, a malicious server could tell Maven "come back after 100 years" that would stall the build |
| * for some. Using this parameter Maven will fail the request instead, if interval is above this value. |
| * |
| * @since 1.9.16 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Long} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_RETRY_HANDLER_INTERVAL_MAX} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_RETRY_HANDLER_INTERVAL_MAX = PREFIX_TRANSPORT_HTTP + "retryHandler.intervalMax"; |
| |
| /** |
| * The default retry interval maximum to use if {@link #HTTP_RETRY_HANDLER_INTERVAL_MAX} isn't set. |
| * Default value 5 minutes. |
| * |
| * @since 1.9.16 |
| */ |
| public static final long DEFAULT_HTTP_RETRY_HANDLER_INTERVAL_MAX = 300_000L; |
| |
| /** |
| * The HTTP codes of remote server responses that should be handled as "too many requests" |
| * (examples: HTTP codes 429 and 503). Accepts comma separated list of HTTP response codes. |
| * |
| * @since 1.9.16 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.String} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_RETRY_HANDLER_SERVICE_UNAVAILABLE} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_RETRY_HANDLER_SERVICE_UNAVAILABLE = |
| PREFIX_TRANSPORT_HTTP + "retryHandler.serviceUnavailable"; |
| |
| /** |
| * The default HTTP codes of remote server responses that should be handled as "too many requests". |
| * Default value: "429,503". |
| * |
| * @since 1.9.16 |
| */ |
| public static final String DEFAULT_HTTP_RETRY_HANDLER_SERVICE_UNAVAILABLE = "429,503"; |
| |
| /** |
| * Should HTTP client use preemptive-authentication for all HTTP verbs (works only w/ BASIC). By default, is |
| * disabled, as it is considered less secure. |
| * |
| * @since 1.9.6 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Boolean} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_PREEMPTIVE_AUTH} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_PREEMPTIVE_AUTH = PREFIX_TRANSPORT_HTTP + "preemptiveAuth"; |
| |
| /** |
| * The default value to use if {@link #HTTP_PREEMPTIVE_AUTH} isn't set (false). |
| * |
| * @since 1.9.6 |
| */ |
| public static final boolean DEFAULT_HTTP_PREEMPTIVE_AUTH = false; |
| |
| /** |
| * Should HTTP client reuse connections (in other words, pool connections) or not? |
| * |
| * @since 1.9.8 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Boolean} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_REUSE_CONNECTIONS} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_REUSE_CONNECTIONS = PREFIX_TRANSPORT_HTTP + "reuseConnections"; |
| |
| /** |
| * The default value to use if {@link #HTTP_REUSE_CONNECTIONS} isn't set (true). |
| * |
| * @since 1.9.8 |
| */ |
| public static final boolean DEFAULT_HTTP_REUSE_CONNECTIONS = true; |
| |
| /** |
| * Total time to live in seconds for an HTTP connection, after that time, the connection will be dropped |
| * (no matter for how long it was idle). |
| * |
| * @since 1.9.8 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Integer} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_CONNECTION_MAX_TTL} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_CONNECTION_MAX_TTL = PREFIX_TRANSPORT_HTTP + "connectionMaxTtl"; |
| |
| /** |
| * The default value to use if {@link #HTTP_CONNECTION_MAX_TTL} isn't set (300 seconds). |
| * |
| * @since 1.9.8 |
| */ |
| public static final int DEFAULT_HTTP_CONNECTION_MAX_TTL = 300; |
| |
| /** |
| * The maximum concurrent connections per route HTTP client is allowed to use. |
| * |
| * @since 1.9.8 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Integer} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_MAX_CONNECTIONS_PER_ROUTE} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_MAX_CONNECTIONS_PER_ROUTE = PREFIX_TRANSPORT_HTTP + "maxConnectionsPerRoute"; |
| |
| /** |
| * The default value to use if {@link #HTTP_MAX_CONNECTIONS_PER_ROUTE} isn't set (50 connections). |
| * |
| * @since 1.9.8 |
| */ |
| public static final int DEFAULT_HTTP_MAX_CONNECTIONS_PER_ROUTE = 50; |
| |
| /** |
| * The local address (interface) to use with HTTP transport. Not all transport supports this option. |
| * |
| * @since 2.0.0 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.String} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_LOCAL_ADDRESS = PREFIX_TRANSPORT_HTTP + "localAddress"; |
| |
| /** |
| * Boolean flag should the HTTP transport support WebDAV remote. Not all transport support this option. |
| * |
| * @since 2.0.0 (moved out from maven-resolver-transport-http). |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Boolean} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_SUPPORT_WEBDAV} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_SUPPORT_WEBDAV = PREFIX_TRANSPORT_HTTP + "supportWebDav"; |
| |
| /** |
| * Default value to use if {@link #HTTP_SUPPORT_WEBDAV} is not set: {@code false}. |
| * |
| * @since 2.0.0 |
| */ |
| public static final boolean DEFAULT_HTTP_SUPPORT_WEBDAV = false; |
| |
| /** |
| * Boolean flag should the HTTP transport use preemptive-auth for PUT requests. Not all transport support this |
| * option. |
| * |
| * @since 2.0.0 (moved out from maven-resolver-transport-http). |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Boolean} |
| * @configurationDefaultValue {@link #DEFAULT_HTTP_PREEMPTIVE_PUT_AUTH} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_PREEMPTIVE_PUT_AUTH = PREFIX_TRANSPORT_HTTP + "preemptivePutAuth"; |
| |
| /** |
| * Default value if {@link #HTTP_PREEMPTIVE_PUT_AUTH} is not set: {@code true}. |
| * |
| * @since 2.0.0 |
| */ |
| public static final boolean DEFAULT_HTTP_PREEMPTIVE_PUT_AUTH = true; |
| |
| /** |
| * Boolean flag should the HTTP transport use expect-continue handshake for PUT requests. Not all transport support |
| * this option. This option may be needed for some broken HTTP servers. Default value corresponds to given |
| * transport default one (resolver does not override those), but if configuration IS given, it will replace |
| * given transport own default value. |
| * |
| * @since 1.9.17 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Boolean} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTP_EXPECT_CONTINUE = PREFIX_TRANSPORT_HTTP + "expectContinue"; |
| |
| /** |
| * The mode that sets HTTPS transport "security mode": to ignore any SSL errors (certificate validity checks, |
| * hostname verification). The default value is {@link #HTTPS_SECURITY_MODE_DEFAULT}. |
| * |
| * @see #HTTPS_SECURITY_MODE_DEFAULT |
| * @see #HTTPS_SECURITY_MODE_INSECURE |
| * @since 1.9.6 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.String} |
| * @configurationDefaultValue {@link #HTTPS_SECURITY_MODE_DEFAULT} |
| * @configurationRepoIdSuffix Yes |
| */ |
| public static final String HTTPS_SECURITY_MODE = PREFIX_TRANSPORT_HTTPS + "securityMode"; |
| |
| /** |
| * The default HTTPS security mode. |
| * |
| * @since 1.9.6 |
| */ |
| public static final String HTTPS_SECURITY_MODE_DEFAULT = "default"; |
| |
| /** |
| * The insecure HTTPS security mode (certificate validation, hostname verification are all ignored). |
| * |
| * @since 1.9.6 |
| */ |
| public static final String HTTPS_SECURITY_MODE_INSECURE = "insecure"; |
| |
| /** |
| * A flag indicating which visitor should be used to "flatten" the dependency graph into list. In Maven 4 |
| * the default is new "levelOrder", while Maven 3 used "preOrder". This property accepts values |
| * "preOrder", "postOrder" and "levelOrder". |
| * |
| * @see #REPOSITORY_SYSTEM_DEPENDENCY_VISITOR_PREORDER |
| * @see #REPOSITORY_SYSTEM_DEPENDENCY_VISITOR_POSTORDER |
| * @see #REPOSITORY_SYSTEM_DEPENDENCY_VISITOR_LEVELORDER |
| * @since 2.0.0 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.String} |
| * @configurationDefaultValue {@link #DEFAULT_REPOSITORY_SYSTEM_DEPENDENCY_VISITOR} |
| * @configurationRepoIdSuffix No |
| */ |
| public static final String REPOSITORY_SYSTEM_DEPENDENCY_VISITOR = PREFIX_SYSTEM + "dependencyVisitor"; |
| |
| /** |
| * The visitor strategy "preOrder". |
| * |
| * @since 2.0.0 |
| */ |
| public static final String REPOSITORY_SYSTEM_DEPENDENCY_VISITOR_PREORDER = "preOrder"; |
| |
| /** |
| * The visitor strategy "postOrder". This was the only one supported in Resolver 1.x and is hence the |
| * default as well. |
| * |
| * @since 2.0.0 |
| */ |
| public static final String REPOSITORY_SYSTEM_DEPENDENCY_VISITOR_POSTORDER = "postOrder"; |
| |
| /** |
| * The visitor strategy "levelOrder". |
| * |
| * @since 2.0.0 |
| */ |
| public static final String REPOSITORY_SYSTEM_DEPENDENCY_VISITOR_LEVELORDER = "levelOrder"; |
| |
| /** |
| * The default visitor strategy. |
| * |
| * @since 2.0.12 |
| */ |
| public static final String DEFAULT_REPOSITORY_SYSTEM_DEPENDENCY_VISITOR = |
| REPOSITORY_SYSTEM_DEPENDENCY_VISITOR_LEVELORDER; |
| |
| /** |
| * A flag indicating whether version scheme cache statistics should be printed on JVM shutdown. |
| * This is useful for analyzing cache performance and effectiveness in development and testing scenarios. |
| * |
| * @since 2.0.10 |
| * @configurationSource {@link RepositorySystemSession#getConfigProperties()} |
| * @configurationType {@link java.lang.Boolean} |
| * @configurationDefaultValue {@link #DEFAULT_VERSION_SCHEME_CACHE_DEBUG} |
| * @configurationRepoIdSuffix No |
| */ |
| public static final String VERSION_SCHEME_CACHE_DEBUG = PREFIX_UTIL + "versionScheme.cacheDebug"; |
| |
| /** |
| * The default value for version scheme cache debug if {@link #VERSION_SCHEME_CACHE_DEBUG} isn't set. |
| * |
| * @since 2.0.10 |
| */ |
| public static final boolean DEFAULT_VERSION_SCHEME_CACHE_DEBUG = false; |
| |
| private ConfigurationProperties() { |
| // hide constructor |
| } |
| } |
