README.txt - manifoldcf-integration-solr-3.x - Git at Google

 # Licensed to the Apache Software Foundation (ASF) under one or more
 # contributor license agreements.  See the NOTICE file distributed with
 # this work for additional information regarding copyright ownership.
 # The ASF licenses this file to You under the Apache License, Version 2.0
 # (the "License"); you may not use this file except in compliance with
 # the License.  You may obtain a copy of the License at
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 Compatibility
 ------------

 This version of this component is fully functional with Apache ManifoldCF 1.6 and
 above.  It is backwards compatible with earlier versions as well, except for the fact
 that two additional Solr fields are required for this plugin to work.

 Upgrading
 ---------

 If you are replacing a version of Apache ManifoldCF Plugin for Apache Solr 3.x that is
 older than version 2.0, you must declare two additional fields (representing parent
 acls and parent deny acls), and reindex all your documents, so all six fields have the
 correct values. Otherwise, the plugin will prevent you from viewing any documents.

 Instructions for Building Apache ManifoldCF Plugin for Apache Solr 3.x from Source
 ------------------------------------------------------------------------------

 1. Download the Java SE 6 JDK (Java Development Kit), or greater, from
    http://www.oracle.com/technetwork/java/index.html.
    You will need the JDK installed, and the %JAVA_HOME%\bin directory included
    on your command path.  To test this, issue a "java -version" command from your
    shell and verify that the Java version is 1.6 or greater.

 2. Download and install Maven 3.0 or later.  Maven installation and configuration
    instructions can be found here:  http://maven.apache.org

 3. Building distribution assemblies

    Execute the following command in order to build the distribution assemblies

    mvn package assembly:assembly

    The JAR packages can be found in the target folder:

    target/apache-manifoldcf-solr-3.x-plugin-<VERSION>.jar where <VERSION> is the release version

 Getting Started
 ---------------

 There are two ways to hook up security to Solr in this package. The first is
 using a Query Parser plugin.  The second is using a Search Component.  In both
 cases, the first step is to have ManifoldCF installed and running.  See:
 http://manifoldcf.apache.org/release/trunk/en_US/how-to-build-and-deploy.html

 Then, you will need to add fields to your Solr schema.xml file that can be used to
 contain document authorization information.  There will need to be six of these
 fields, an 'allow' field for documents, parents, and shares, and a 'deny' field for
 documents, parents, and shares.  For example:

   <field name="allow_token_document" type="string" indexed="true" stored="false"
     multiValued="true" required="false" default="__nosecurity__"/>
   <field name="allow_token_parent" type="string" indexed="true" stored="false"
     multiValued="true" required="false" default="__nosecurity__"/>
   <field name="allow_token_share" type="string" indexed="true" stored="false"
     multiValued="true" required="false" default="__nosecurity__"/>
   <field name="deny_token_document" type="string" indexed="true" stored="false"
     multiValued="true" required="false" default="__nosecurity__"/>
   <field name="deny_token_parent" type="string" indexed="true" stored="false"
     multiValued="true" required="false" default="__nosecurity__"/>
   <field name="deny_token_share" type="string" indexed="true" stored="false"
     multiValued="true" required="false" default="__nosecurity__"/>

 The default value of "__nosecurity__" is required by this plugin, so do not forget
 to include it.

 Using the Query Parser Plugin
 ----------------------------

 To set up the query parser plugin, modify your solrconfig.xml to add the query parser:

   <!-- ManifoldCF document security enforcement component -->
   <queryParser name="manifoldCFSecurity"
     class="org.apache.solr.mcf.ManifoldCFQParserPlugin">
     <str name="AuthorityServiceBaseURL">http://localhost:8345/mcf-authority-service</str>
     <int name="ConnectionPoolSize">50</int>
   </queryParser>

 Hook up the search component in the solrconfig.xml file wherever you want it, e.g.:

 <requestHandler name="search" class="solr.SearchHandler" default="true">
   <lst name="appends">
     <str name="fq">{!manifoldCFSecurity}</str>
   </lst>
   ...
 </requestHandler>


 Using the Search Component
 ----------------------------

 To set up the search component, modify your solrconfig.xml to add the search component:

   <!-- ManifoldCF document security enforcement component -->
   <searchComponent name="manifoldCFSecurity"
     class="org.apache.solr.mcf.ManifoldCFSearchComponent">
     <str name="AuthorityServiceBaseURL">http://localhost:8345/mcf-authority-service</str>
     <int name="ConnectionPoolSize">50</int>
   </searchComponent>

 Hook up the search component in the solrconfig.xml file wherever you want it, e.g.:

 <requestHandler name="search" class="solr.SearchHandler" default="true">
   <arr name="last-components">
     <str>manifoldCFSecurity</str>
   </arr>
   ...
 </requestHandler>


 Supplying authenticated usernames and domains
 ----------------------------------------------

 This component looks for the following parameters in the Solr request object:

 AuthenticatedUserName
 AuthenticatedUserDomain
 AuthenticatedUserName_XX
 AuthenticatedUserDomain_XX

 At a minimum, AuthenticatedUserName must be present in order for the component to communicate with
 the ManifoldCF Authority Service and obtain user access tokens.  In that case, the user identity will consist
 of one user and one authorization domain.  If AuthenticatedUserDomain is not set, then the authorization domain
 chosen will be the standard default domain, an empty string.

 If you need multiple user/domain tuples for the user identity, you may pass these as parameter pairs starting with
 AuthenticatedUserName_0 and AuthenticatedUserDomain_0, and counting up as high as you like.


 Operation in conjunction with mod-authz-annotate
 ------------------------------------------------

 An optional component of ManifoldCF can be built and deployed as part of Apache - mod-authz-annotate.  The
 mod-authz-annotate module obtains the Kerberos principal from the Kerberos tickets present if mod-auth-kerb is used, and uses
 the MCF Authority Service to look up the appropriate access tokens.  If you choose to use that architecture,
 you will still need to use this Solr component to modify the user query.  All you have to do is the following:

 - Make sure you do not set AuthenticatedUserName or AuthenticatedUserName_0 in the request
 - Make sure the HTTP request from Apache to Solr translates all AAAGRP header values into "UserToken" parameters
    for the Solr request


 Licensing
 ---------

 Apache ManifoldCF Plugin for Apache Solr 3.x is licensed under the
 Apache License 2.0. See the files called LICENSE.txt and NOTICE.txt
 for more information.

 Cryptographic Software Notice
 -----------------------------

 This distribution may include software that has been designed for use
 with cryptographic software. The country in which you currently reside
 may have restrictions on the import, possession, use, and/or re-export
 to another country, of encryption software. BEFORE using any encryption
 software, please check your country's laws, regulations and policies
 concerning the import, possession, or use, and re-export of encryption
 software, to see if this is permitted. See <http://www.wassenaar.org/>
 for more information.

 The U.S. Government Department of Commerce, Bureau of Industry and
 Security (BIS), has classified this software as Export Commodity
 Control Number (ECCN) 5D002.C.1, which includes information security
 software using or performing cryptographic functions with asymmetric
 algorithms. The form and manner of this Apache Software Foundation
 distribution makes it eligible for export under the License Exception
 ENC Technology Software Unrestricted (TSU) exception (see the BIS
 Export Administration Regulations, Section 740.13) for both object
 code and source code.

 The following provides more details on the included software that
 may be subject to export controls on cryptographic software:

   The Apache ManifoldCF Plugin for Apache Solr 3.x does not include any
   implementation or usage of cryptographic software at this time.

 Contact
 -------

   o For general information visit the main project site at
     http://manifoldcf.apache.org
	# Licensed to the Apache Software Foundation (ASF) under one or more
	# contributor license agreements. See the NOTICE file distributed with
	# this work for additional information regarding copyright ownership.
	# The ASF licenses this file to You under the Apache License, Version 2.0
	# (the "License"); you may not use this file except in compliance with
	# the License. You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	Compatibility
	------------

	This version of this component is fully functional with Apache ManifoldCF 1.6 and
	above. It is backwards compatible with earlier versions as well, except for the fact
	that two additional Solr fields are required for this plugin to work.

	Upgrading
	---------

	If you are replacing a version of Apache ManifoldCF Plugin for Apache Solr 3.x that is
	older than version 2.0, you must declare two additional fields (representing parent
	acls and parent deny acls), and reindex all your documents, so all six fields have the
	correct values. Otherwise, the plugin will prevent you from viewing any documents.

	Instructions for Building Apache ManifoldCF Plugin for Apache Solr 3.x from Source
	------------------------------------------------------------------------------

	1. Download the Java SE 6 JDK (Java Development Kit), or greater, from
	http://www.oracle.com/technetwork/java/index.html.
	You will need the JDK installed, and the %JAVA_HOME%\bin directory included
	on your command path. To test this, issue a "java -version" command from your
	shell and verify that the Java version is 1.6 or greater.

	2. Download and install Maven 3.0 or later. Maven installation and configuration
	instructions can be found here: http://maven.apache.org

	3. Building distribution assemblies

	Execute the following command in order to build the distribution assemblies

	mvn package assembly:assembly

	The JAR packages can be found in the target folder:

	target/apache-manifoldcf-solr-3.x-plugin-<VERSION>.jar where <VERSION> is the release version

	Getting Started
	---------------

	There are two ways to hook up security to Solr in this package. The first is
	using a Query Parser plugin. The second is using a Search Component. In both
	cases, the first step is to have ManifoldCF installed and running. See:
	http://manifoldcf.apache.org/release/trunk/en_US/how-to-build-and-deploy.html

	Then, you will need to add fields to your Solr schema.xml file that can be used to
	contain document authorization information. There will need to be six of these
	fields, an 'allow' field for documents, parents, and shares, and a 'deny' field for
	documents, parents, and shares. For example:

	<field name="allow_token_document" type="string" indexed="true" stored="false"
	multiValued="true" required="false" default="__nosecurity__"/>
	<field name="allow_token_parent" type="string" indexed="true" stored="false"
	multiValued="true" required="false" default="__nosecurity__"/>
	<field name="allow_token_share" type="string" indexed="true" stored="false"
	multiValued="true" required="false" default="__nosecurity__"/>
	<field name="deny_token_document" type="string" indexed="true" stored="false"
	multiValued="true" required="false" default="__nosecurity__"/>
	<field name="deny_token_parent" type="string" indexed="true" stored="false"
	multiValued="true" required="false" default="__nosecurity__"/>
	<field name="deny_token_share" type="string" indexed="true" stored="false"
	multiValued="true" required="false" default="__nosecurity__"/>

	The default value of "__nosecurity__" is required by this plugin, so do not forget
	to include it.

	Using the Query Parser Plugin
	----------------------------

	To set up the query parser plugin, modify your solrconfig.xml to add the query parser:

	<!-- ManifoldCF document security enforcement component -->
	<queryParser name="manifoldCFSecurity"
	class="org.apache.solr.mcf.ManifoldCFQParserPlugin">
	<str name="AuthorityServiceBaseURL">http://localhost:8345/mcf-authority-service</str>
	<int name="ConnectionPoolSize">50</int>
	</queryParser>

	Hook up the search component in the solrconfig.xml file wherever you want it, e.g.:

	<requestHandler name="search" class="solr.SearchHandler" default="true">
	<lst name="appends">
	<str name="fq">{!manifoldCFSecurity}</str>
	</lst>
	...
	</requestHandler>


	Using the Search Component
	----------------------------

	To set up the search component, modify your solrconfig.xml to add the search component:

	<!-- ManifoldCF document security enforcement component -->
	<searchComponent name="manifoldCFSecurity"
	class="org.apache.solr.mcf.ManifoldCFSearchComponent">
	<str name="AuthorityServiceBaseURL">http://localhost:8345/mcf-authority-service</str>
	<int name="ConnectionPoolSize">50</int>
	</searchComponent>

	Hook up the search component in the solrconfig.xml file wherever you want it, e.g.:

	<requestHandler name="search" class="solr.SearchHandler" default="true">
	<arr name="last-components">
	<str>manifoldCFSecurity</str>
	</arr>
	...
	</requestHandler>


	Supplying authenticated usernames and domains
	----------------------------------------------

	This component looks for the following parameters in the Solr request object:

	AuthenticatedUserName
	AuthenticatedUserDomain
	AuthenticatedUserName_XX
	AuthenticatedUserDomain_XX

	At a minimum, AuthenticatedUserName must be present in order for the component to communicate with
	the ManifoldCF Authority Service and obtain user access tokens. In that case, the user identity will consist
	of one user and one authorization domain. If AuthenticatedUserDomain is not set, then the authorization domain
	chosen will be the standard default domain, an empty string.

	If you need multiple user/domain tuples for the user identity, you may pass these as parameter pairs starting with
	AuthenticatedUserName_0 and AuthenticatedUserDomain_0, and counting up as high as you like.


	Operation in conjunction with mod-authz-annotate
	------------------------------------------------

	An optional component of ManifoldCF can be built and deployed as part of Apache - mod-authz-annotate. The
	mod-authz-annotate module obtains the Kerberos principal from the Kerberos tickets present if mod-auth-kerb is used, and uses
	the MCF Authority Service to look up the appropriate access tokens. If you choose to use that architecture,
	you will still need to use this Solr component to modify the user query. All you have to do is the following:

	- Make sure you do not set AuthenticatedUserName or AuthenticatedUserName_0 in the request
	- Make sure the HTTP request from Apache to Solr translates all AAAGRP header values into "UserToken" parameters
	for the Solr request



	Licensing
	---------

	Apache ManifoldCF Plugin for Apache Solr 3.x is licensed under the
	Apache License 2.0. See the files called LICENSE.txt and NOTICE.txt
	for more information.

	Cryptographic Software Notice
	-----------------------------

	This distribution may include software that has been designed for use
	with cryptographic software. The country in which you currently reside
	may have restrictions on the import, possession, use, and/or re-export
	to another country, of encryption software. BEFORE using any encryption
	software, please check your country's laws, regulations and policies
	concerning the import, possession, or use, and re-export of encryption
	software, to see if this is permitted. See <http://www.wassenaar.org/>
	for more information.

	The U.S. Government Department of Commerce, Bureau of Industry and
	Security (BIS), has classified this software as Export Commodity
	Control Number (ECCN) 5D002.C.1, which includes information security
	software using or performing cryptographic functions with asymmetric
	algorithms. The form and manner of this Apache Software Foundation
	distribution makes it eligible for export under the License Exception
	ENC Technology Software Unrestricted (TSU) exception (see the BIS
	Export Administration Regulations, Section 740.13) for both object
	code and source code.

	The following provides more details on the included software that
	may be subject to export controls on cryptographic software:

	The Apache ManifoldCF Plugin for Apache Solr 3.x does not include any
	implementation or usage of cryptographic software at this time.

	Contact
	-------

	o For general information visit the main project site at
	http://manifoldcf.apache.org