third-party/sqlx-sqlite/src/options/mod.rs

use std::path::Path;

mod auto_vacuum;
mod connect;
mod journal_mode;
mod locking_mode;
mod parse;
mod synchronous;

use crate::connection::LogSettings;
pub use auto_vacuum::SqliteAutoVacuum;
pub use journal_mode::SqliteJournalMode;
pub use locking_mode::SqliteLockingMode;
use std::cmp::Ordering;
use std::sync::Arc;
use std::{borrow::Cow, time::Duration};
pub use synchronous::SqliteSynchronous;

use crate::common::DebugFn;
use crate::connection::collation::Collation;
use sqlx_core::{config, IndexMap};

/// Options and flags which can be used to configure a SQLite connection.
///
/// A value of `SqliteConnectOptions` can be parsed from a connection URL,
/// as described by [SQLite](https://www.sqlite.org/uri.html).
///
/// This type also implements [`FromStr`][std::str::FromStr] so you can parse it from a string
/// containing a connection URL and then further adjust options if necessary (see example below).
///
/// | URL | Description |
/// | -- | -- |
/// `sqlite::memory:` | Open an in-memory database. |
/// `sqlite:data.db` | Open the file `data.db` in the current directory. |
/// `sqlite://data.db` | Open the file `data.db` in the current directory. |
/// `sqlite:///data.db` | Open the file `data.db` from the root (`/`) directory. |
/// `sqlite://data.db?mode=ro` | Open the file `data.db` for read-only access. |
///
/// # Example
///
/// ```rust,no_run
/// # async fn example() -> sqlx::Result<()> {
/// use sqlx::ConnectOptions;
/// use sqlx::sqlite::{SqliteConnectOptions, SqliteJournalMode, SqlitePool};
/// use std::str::FromStr;
///
/// let opts = SqliteConnectOptions::from_str("sqlite://data.db")?
///     .journal_mode(SqliteJournalMode::Wal)
///     .read_only(true);
///
/// // use in a pool
/// let pool = SqlitePool::connect_with(opts).await?;
///
/// // or connect directly
/// # let opts = SqliteConnectOptions::from_str("sqlite://data.db")?;
/// let conn = opts.connect().await?;
/// #
/// # Ok(())
/// # }
/// ```
#[derive(Clone, Debug)]
pub struct SqliteConnectOptions {
    pub(crate) filename: Cow<'static, Path>,
    pub(crate) in_memory: bool,
    pub(crate) read_only: bool,
    pub(crate) create_if_missing: bool,
    pub(crate) shared_cache: bool,
    pub(crate) statement_cache_capacity: usize,
    pub(crate) busy_timeout: Duration,
    pub(crate) log_settings: LogSettings,
    pub(crate) immutable: bool,
    pub(crate) vfs: Option<Cow<'static, str>>,

    pub(crate) pragmas: IndexMap<Cow<'static, str>, Option<Cow<'static, str>>>,

    /// Extensions are specified as a pair of \<Extension Name : Optional Entry Point>, the majority
    /// of SQLite extensions will use the default entry points specified in the docs, these should
    /// be added to the map with a `None` value.
    /// <https://www.sqlite.org/loadext.html#loading_an_extension>
    #[cfg(feature = "load-extension")]
    pub(crate) extensions: IndexMap<Cow<'static, str>, Option<Cow<'static, str>>>,

    pub(crate) command_channel_size: usize,
    pub(crate) row_channel_size: usize,

    pub(crate) collations: Vec<Collation>,

    pub(crate) serialized: bool,
    pub(crate) thread_name: Arc<DebugFn<dyn Fn(u64) -> String + Send + Sync + 'static>>,

    pub(crate) optimize_on_close: OptimizeOnClose,

    #[cfg(feature = "regexp")]
    pub(crate) register_regexp_function: bool,
}

#[derive(Clone, Debug)]
pub enum OptimizeOnClose {
    Enabled { analysis_limit: Option<u32> },
    Disabled,
}

impl Default for SqliteConnectOptions {
    fn default() -> Self {
        Self::new()
    }
}

impl SqliteConnectOptions {
    /// Construct `Self` with default options.
    ///
    /// See the source of this method for the current defaults.
    pub fn new() -> Self {
        let mut pragmas: IndexMap<Cow<'static, str>, Option<Cow<'static, str>>> = IndexMap::new();

        // Standard pragmas
        //
        // Most of these don't actually need to be sent because they would be set to their
        // default values anyway. See the SQLite documentation for default values of these PRAGMAs:
        // https://www.sqlite.org/pragma.html
        //
        // However, by inserting into the map here, we can ensure that they're set in the proper
        // order, even if they're overwritten later by their respective setters or
        // directly by `pragma()`

        // SQLCipher special case: if the `key` pragma is set, it must be executed first.
        pragmas.insert("key".into(), None);

        // Other SQLCipher pragmas that has to be after the key, but before any other operation on the database.
        // https://www.zetetic.net/sqlcipher/sqlcipher-api/

        // Bytes of the database file that is not encrypted
        // Default for SQLCipher v4 is 0
        // If greater than zero 'cipher_salt' pragma must be also defined
        pragmas.insert("cipher_plaintext_header_size".into(), None);

        // Allows to provide salt manually
        // By default SQLCipher sets salt automatically, use only in conjunction with
        // 'cipher_plaintext_header_size' pragma
        pragmas.insert("cipher_salt".into(), None);

        // Number of iterations used in PBKDF2 key derivation.
        // Default for SQLCipher v4 is 256000
        pragmas.insert("kdf_iter".into(), None);

        // Define KDF algorithm to be used.
        // Default for SQLCipher v4 is PBKDF2_HMAC_SHA512.
        pragmas.insert("cipher_kdf_algorithm".into(), None);

        // Enable or disable HMAC functionality.
        // Default for SQLCipher v4 is 1.
        pragmas.insert("cipher_use_hmac".into(), None);

        // Set default encryption settings depending on the version 1,2,3, or 4.
        pragmas.insert("cipher_compatibility".into(), None);

        // Page size of encrypted database.
        // Default for SQLCipher v4 is 4096.
        pragmas.insert("cipher_page_size".into(), None);

        // Choose algorithm used for HMAC.
        // Default for SQLCipher v4 is HMAC_SHA512.
        pragmas.insert("cipher_hmac_algorithm".into(), None);

        // Normally, page_size must be set before any other action on the database.
        // Defaults to 4096 for new databases.
        pragmas.insert("page_size".into(), None);

        // locking_mode should be set before journal_mode:
        // https://www.sqlite.org/wal.html#use_of_wal_without_shared_memory
        pragmas.insert("locking_mode".into(), None);

        // `auto_vacuum` needs to be executed before `journal_mode`, if set.
        //
        // Otherwise, a change in the `journal_mode` setting appears to mark even an empty database as dirty,
        // requiring a `vacuum` command to be executed to actually apply the new `auto_vacuum` setting.
        pragmas.insert("auto_vacuum".into(), None);

        // Don't set `journal_mode` unless the user requested it.
        // WAL mode is a permanent setting for created databases and changing into or out of it
        // requires an exclusive lock that can't be waited on with `sqlite3_busy_timeout()`.
        // https://github.com/launchbadge/sqlx/pull/1930#issuecomment-1168165414
        pragmas.insert("journal_mode".into(), None);

        // We choose to enable foreign key enforcement by default, though SQLite normally
        // leaves it off for backward compatibility: https://www.sqlite.org/foreignkeys.html#fk_enable
        pragmas.insert("foreign_keys".into(), Some("ON".into()));

        // The `synchronous` pragma defaults to FULL
        // https://www.sqlite.org/compile.html#default_synchronous.
        pragmas.insert("synchronous".into(), None);

        // Soft limit on the number of rows that `ANALYZE` touches per index.
        pragmas.insert("analysis_limit".into(), None);

        Self {
            filename: Cow::Borrowed(Path::new(":memory:")),
            in_memory: false,
            read_only: false,
            create_if_missing: false,
            shared_cache: false,
            statement_cache_capacity: 100,
            busy_timeout: Duration::from_secs(5),
            log_settings: Default::default(),
            immutable: false,
            vfs: None,
            pragmas,
            #[cfg(feature = "load-extension")]
            extensions: Default::default(),
            collations: Default::default(),
            serialized: false,
            thread_name: Arc::new(DebugFn(|id| format!("sqlx-sqlite-worker-{id}"))),
            command_channel_size: 50,
            row_channel_size: 50,
            optimize_on_close: OptimizeOnClose::Disabled,
            #[cfg(feature = "regexp")]
            register_regexp_function: false,
        }
    }

    /// Sets the name of the database file.
    ///
    /// This is a low-level API, and SQLx will apply no special treatment for `":memory:"` as an
    /// in-memory database using this method. Using [`SqliteConnectOptions::from_str()`][SqliteConnectOptions#from_str] may be
    /// preferred for simple use cases.
    pub fn filename(mut self, filename: impl AsRef<Path>) -> Self {
        self.filename = Cow::Owned(filename.as_ref().to_owned());
        self
    }

    /// Gets the current name of the database file.
    pub fn get_filename(&self) -> &Path {
        &self.filename
    }

    /// Set the enforcement of [foreign key constraints](https://www.sqlite.org/pragma.html#pragma_foreign_keys).
    ///
    /// SQLx chooses to enable this by default so that foreign keys function as expected,
    /// compared to other database flavors.
    pub fn foreign_keys(self, on: bool) -> Self {
        self.pragma("foreign_keys", if on { "ON" } else { "OFF" })
    }

    /// Set the [`SQLITE_OPEN_MEMORY` flag](https://sqlite.org/c3ref/open.html).
    ///
    /// By default, this is disabled.
    pub fn in_memory(mut self, in_memory: bool) -> Self {
        self.in_memory = in_memory;
        self
    }

    /// Set the [`SQLITE_OPEN_SHAREDCACHE` flag](https://sqlite.org/sharedcache.html).
    ///
    /// By default, this is disabled.
    pub fn shared_cache(mut self, on: bool) -> Self {
        self.shared_cache = on;
        self
    }

    /// Sets the [journal mode](https://www.sqlite.org/pragma.html#pragma_journal_mode) for the database connection.
    ///
    /// Journal modes are ephemeral per connection, with the exception of the
    /// [Write-Ahead Log (WAL) mode](https://www.sqlite.org/wal.html).
    ///
    /// A database created in WAL mode retains the setting and will apply it to all connections
    /// opened against it that don't set a `journal_mode`.
    ///
    /// Opening a connection to a database created in WAL mode with a different `journal_mode` will
    /// erase the setting on the database, requiring an exclusive lock to do so.
    /// You may get a `database is locked` (corresponding to `SQLITE_BUSY`) error if another
    /// connection is accessing the database file at the same time.
    ///
    /// SQLx does not set a journal mode by default, to avoid unintentionally changing a database
    /// into or out of WAL mode.
    ///
    /// The default journal mode for non-WAL databases is `DELETE`, or `MEMORY` for in-memory
    /// databases.
    ///
    /// For consistency, any commands in `sqlx-cli` which create a SQLite database will create it
    /// in WAL mode.
    pub fn journal_mode(self, mode: SqliteJournalMode) -> Self {
        self.pragma("journal_mode", mode.as_str())
    }

    /// Sets the [locking mode](https://www.sqlite.org/pragma.html#pragma_locking_mode) for the database connection.
    ///
    /// The default locking mode is NORMAL.
    pub fn locking_mode(self, mode: SqliteLockingMode) -> Self {
        self.pragma("locking_mode", mode.as_str())
    }

    /// Sets the [access mode](https://www.sqlite.org/c3ref/open.html) to open the database
    /// for read-only access.
    pub fn read_only(mut self, read_only: bool) -> Self {
        self.read_only = read_only;
        self
    }

    /// Sets the [access mode](https://www.sqlite.org/c3ref/open.html) to create the database file
    /// if the file does not exist.
    ///
    /// By default, a new file **will not be created** if one is not found.
    pub fn create_if_missing(mut self, create: bool) -> Self {
        self.create_if_missing = create;
        self
    }

    /// Sets the capacity of the connection's statement cache in a number of stored
    /// distinct statements. Caching is handled using LRU, meaning when the
    /// amount of queries hits the defined limit, the oldest statement will get
    /// dropped.
    ///
    /// The default cache capacity is 100 statements.
    pub fn statement_cache_capacity(mut self, capacity: usize) -> Self {
        self.statement_cache_capacity = capacity;
        self
    }

    /// Sets a timeout value to wait when the database is locked, before
    /// returning a busy timeout error.
    ///
    /// The default busy timeout is 5 seconds.
    pub fn busy_timeout(mut self, timeout: Duration) -> Self {
        self.busy_timeout = timeout;
        self
    }

    /// Sets the [synchronous](https://www.sqlite.org/pragma.html#pragma_synchronous) setting for the database connection.
    ///
    /// The default synchronous settings is FULL. However, if durability is not a concern,
    /// then NORMAL is normally all one needs in WAL mode.
    pub fn synchronous(self, synchronous: SqliteSynchronous) -> Self {
        self.pragma("synchronous", synchronous.as_str())
    }

    /// Sets the [auto_vacuum](https://www.sqlite.org/pragma.html#pragma_auto_vacuum) setting for the database connection.
    ///
    /// The default auto_vacuum setting is NONE.
    ///
    /// For existing databases, a change to this value does not take effect unless a
    /// [`VACUUM` command](https://www.sqlite.org/lang_vacuum.html) is executed.
    pub fn auto_vacuum(self, auto_vacuum: SqliteAutoVacuum) -> Self {
        self.pragma("auto_vacuum", auto_vacuum.as_str())
    }

    /// Sets the [page_size](https://www.sqlite.org/pragma.html#pragma_page_size) setting for the database connection.
    ///
    /// The default page_size setting is 4096.
    ///
    /// For existing databases, a change to this value does not take effect unless a
    /// [`VACUUM` command](https://www.sqlite.org/lang_vacuum.html) is executed.
    /// However, it cannot be changed in WAL mode.
    pub fn page_size(self, page_size: u32) -> Self {
        self.pragma("page_size", page_size.to_string())
    }

    /// Sets custom initial pragma for the database connection.
    pub fn pragma<K, V>(mut self, key: K, value: V) -> Self
    where
        K: Into<Cow<'static, str>>,
        V: Into<Cow<'static, str>>,
    {
        self.pragmas.insert(key.into(), Some(value.into()));
        self
    }

    /// Add a custom collation for comparing strings in SQL.
    ///
    /// If a collation with the same name already exists, it will be replaced.
    ///
    /// See [`sqlite3_create_collation()`](https://www.sqlite.org/c3ref/create_collation.html) for details.
    ///
    /// Note this excerpt:
    /// > The collating function must obey the following properties for all strings A, B, and C:
    /// >
    /// > If A==B then B==A.
    /// > If A==B and B==C then A==C.
    /// > If A\<B then B>A.
    /// > If A<B and B<C then A<C.
    /// >
    /// > If a collating function fails any of the above constraints and that collating function is
    /// > registered and used, then the behavior of SQLite is undefined.
    pub fn collation<N, F>(mut self, name: N, collate: F) -> Self
    where
        N: Into<Arc<str>>,
        F: Fn(&str, &str) -> Ordering + Send + Sync + 'static,
    {
        self.collations.push(Collation::new(name, collate));
        self
    }

    /// Set to `true` to signal to SQLite that the database file is on read-only media.
    ///
    /// If enabled, SQLite assumes the database file _cannot_ be modified, even by higher
    /// privileged processes, and so disables locking and change detection. This is intended
    /// to improve performance but can produce incorrect query results or errors if the file
    /// _does_ change.
    ///
    /// Note that this is different from the `SQLITE_OPEN_READONLY` flag set by
    /// [`.read_only()`][Self::read_only], though the documentation suggests that this
    /// does _imply_ `SQLITE_OPEN_READONLY`.
    ///
    /// See [`sqlite3_open`](https://www.sqlite.org/capi3ref.html#sqlite3_open) (subheading
    /// "URI Filenames") for details.
    pub fn immutable(mut self, immutable: bool) -> Self {
        self.immutable = immutable;
        self
    }

    /// Sets the [threading mode](https://www.sqlite.org/threadsafe.html) for the database connection.
    ///
    /// The default setting is `false` corresponding to using `OPEN_NOMUTEX`.
    /// If set to `true` then `OPEN_FULLMUTEX`.
    ///
    /// See [open](https://www.sqlite.org/c3ref/open.html) for more details.
    ///
    /// ### Note
    /// Setting this to `true` may help if you are getting access violation errors or segmentation
    /// faults, but will also incur a significant performance penalty. You should leave this
    /// set to `false` if at all possible.
    ///
    /// If you do end up needing to set this to `true` for some reason, please
    /// [open an issue](https://github.com/launchbadge/sqlx/issues/new/choose) as this may indicate
    /// a concurrency bug in SQLx. Please provide clear instructions for reproducing the issue,
    /// including a sample database schema if applicable.
    pub fn serialized(mut self, serialized: bool) -> Self {
        self.serialized = serialized;
        self
    }

    /// Provide a callback to generate the name of the background worker thread.
    ///
    /// The value passed to the callback is an auto-incremented integer for use as the thread ID.
    pub fn thread_name(
        mut self,
        generator: impl Fn(u64) -> String + Send + Sync + 'static,
    ) -> Self {
        self.thread_name = Arc::new(DebugFn(generator));
        self
    }

    /// Set the maximum number of commands to buffer for the worker thread before backpressure is
    /// applied.
    ///
    /// Given that most commands sent to the worker thread involve waiting for a result,
    /// the command channel is unlikely to fill up unless a lot queries are executed in a short
    /// period but cancelled before their full resultsets are returned.
    pub fn command_buffer_size(mut self, size: usize) -> Self {
        self.command_channel_size = size;
        self
    }

    /// Set the maximum number of rows to buffer back to the calling task when a query is executed.
    ///
    /// If the calling task cannot keep up, backpressure will be applied to the worker thread
    /// in order to limit CPU and memory usage.
    pub fn row_buffer_size(mut self, size: usize) -> Self {
        self.row_channel_size = size;
        self
    }

    /// Sets the [`vfs`](https://www.sqlite.org/vfs.html) parameter of the database connection.
    ///
    /// The default value is empty, and sqlite will use the default VFS object depending on the
    /// operating system.
    pub fn vfs(mut self, vfs_name: impl Into<Cow<'static, str>>) -> Self {
        self.vfs = Some(vfs_name.into());
        self
    }

    /// Add a [SQLite extension](https://www.sqlite.org/loadext.html) to be loaded into the database
    /// connection at startup, using the default entrypoint.
    ///
    /// Most common SQLite extensions can be loaded using this method.
    /// For extensions where you need to override the entry point,
    /// use [`.extension_with_entrypoint()`].
    ///
    /// Multiple extensions can be loaded by calling this method,
    /// or [`.extension_with_entrypoint()`] where applicable,
    /// once for each extension.
    ///
    /// Extension loading is only enabled during the initialization of the connection,
    /// and disabled before `connect()` returns by setting
    /// [`SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION`] to 0.
    ///
    /// This will not enable the SQL `load_extension()` function.
    ///
    /// [`SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION`]: https://www.sqlite.org/c3ref/c_dbconfig_defensive.html#sqlitedbconfigenableloadextension
    /// [`.extension_with_entrypoint()`]: Self::extension_with_entrypoint
    ///
    /// # Safety
    /// This causes arbitrary DLLs on the filesystem to be loaded at runtime,
    /// which can easily result in undefined behavior, memory corruption,
    /// or exploitable vulnerabilities if misused.
    ///
    /// It is not possible to provide a truly safe version of this API.
    ///
    /// Use this method with care, and only load extensions that you trust.
    ///
    /// # Example
    /// ```rust,no_run
    /// # use sqlx_core::error::Error;
    /// # use std::str::FromStr;
    /// # use sqlx_sqlite::SqliteConnectOptions;
    /// # fn options() -> Result<SqliteConnectOptions, Error> {
    /// let mut options = SqliteConnectOptions::from_str("sqlite://data.db")?;
    ///
    /// // SAFETY: these are trusted extensions.
    /// unsafe {
    ///     options = options
    ///         .extension("vsv")
    ///         .extension("mod_spatialite");
    /// }
    ///
    /// # Ok(options)
    /// # }
    /// ```
    #[cfg(feature = "load-extension")]
    #[cfg_attr(docsrs, doc(cfg(feature = "sqlite-load-extension")))]
    pub unsafe fn extension(mut self, extension_name: impl Into<Cow<'static, str>>) -> Self {
        self.extensions.insert(extension_name.into(), None);
        self
    }

    /// Add a [SQLite extension](https://www.sqlite.org/loadext.html) to be loaded into the database
    /// connection at startup, overriding the entrypoint.
    ///
    /// See also [`.extension()`] for extensions using the standard entrypoint name
    /// `sqlite3_extension_init` or `sqlite3_<extension name>_init`.
    ///
    /// Multiple extensions can be loaded by calling this method,
    /// or [`.extension()`] where applicable,
    /// once for each extension.
    ///
    /// Extension loading is only enabled during the initialization of the connection,
    /// and disabled before `connect()` returns by setting
    /// [`SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION`] to 0.
    ///
    /// This will not enable the SQL `load_extension()` function.
    ///
    /// [`SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION`]: https://www.sqlite.org/c3ref/c_dbconfig_defensive.html#sqlitedbconfigenableloadextension
    /// [`.extension_with_entrypoint()`]: Self::extension_with_entrypoint
    ///
    /// # Safety
    /// This causes arbitrary DLLs on the filesystem to be loaded at runtime,
    /// which can easily result in undefined behavior, memory corruption,
    /// or exploitable vulnerabilities if misused.
    ///
    /// If you specify the wrong entrypoint name, it _may_ simply result in an error,
    /// or it may end up invoking the wrong routine, leading to undefined behavior.
    ///
    /// It is not possible to provide a truly safe version of this API.
    ///
    /// Use this method with care, only load extensions that you trust,
    /// and double-check the entrypoint name with the extension's documentation or source code.
    #[cfg(feature = "load-extension")]
    #[cfg_attr(docsrs, doc(cfg(feature = "sqlite-load-extension")))]
    pub unsafe fn extension_with_entrypoint(
        mut self,
        extension_name: impl Into<Cow<'static, str>>,
        entry_point: impl Into<Cow<'static, str>>,
    ) -> Self {
        self.extensions
            .insert(extension_name.into(), Some(entry_point.into()));
        self
    }

    /// Execute `PRAGMA optimize;` on the SQLite connection before closing.
    ///
    /// The SQLite manual recommends using this for long-lived databases.
    ///
    /// This will collect and store statistics about the layout of data in your tables to help the query planner make better decisions.
    /// Over the connection's lifetime, the query planner will make notes about which tables could use up-to-date statistics so this
    /// command doesn't have to scan the whole database every time. Thus, the best time to execute this is on connection close.
    ///
    /// `analysis_limit` sets a soft limit on the maximum number of rows to scan per index.
    /// It is equivalent to setting [`Self::analysis_limit`] but only takes effect for the `PRAGMA optimize;` call
    /// and does not affect the behavior of any `ANALYZE` statements made during the connection's lifetime.
    ///
    /// If not `None`, the `analysis_limit` here overrides the global `analysis_limit` setting,
    /// but only for the `PRAGMA optimize;` call.
    ///
    /// Not enabled by default.
    ///
    /// See [the SQLite manual](https://www.sqlite.org/lang_analyze.html#automatically_running_analyze) for details.
    pub fn optimize_on_close(
        mut self,
        enabled: bool,
        analysis_limit: impl Into<Option<u32>>,
    ) -> Self {
        self.optimize_on_close = if enabled {
            OptimizeOnClose::Enabled {
                analysis_limit: (analysis_limit.into()),
            }
        } else {
            OptimizeOnClose::Disabled
        };
        self
    }

    /// Set a soft limit on the number of rows that `ANALYZE` touches per index.
    ///
    /// This also affects `PRAGMA optimize` which is set by [Self::optimize_on_close].
    ///
    /// The value recommended by SQLite is `400`. There is no default.
    ///
    /// See [the SQLite manual](https://www.sqlite.org/lang_analyze.html#approx) for details.
    pub fn analysis_limit(mut self, limit: impl Into<Option<u32>>) -> Self {
        if let Some(limit) = limit.into() {
            return self.pragma("analysis_limit", limit.to_string());
        }
        self.pragmas.insert("analysis_limit".into(), None);
        self
    }

    /// Register a regexp function that allows using regular expressions in queries.
    ///
    /// ```
    /// # use std::str::FromStr;
    /// # use sqlx::{ConnectOptions, Connection, Row};
    /// # use sqlx_sqlite::SqliteConnectOptions;
    /// # async fn run() -> sqlx::Result<()> {
    /// let mut sqlite = SqliteConnectOptions::from_str("sqlite://:memory:")?
    ///     .with_regexp()
    ///     .connect()
    ///     .await?;
    /// let tables = sqlx::query("SELECT name FROM sqlite_schema WHERE name REGEXP 'foo(\\d+)bar'")
    ///     .fetch_all(&mut sqlite)
    ///     .await?;
    /// # Ok(())
    /// # }
    /// ```
    ///
    /// This uses the [`regex`] crate, and is only enabled when you enable the `regex` feature is enabled on sqlx
    #[cfg(feature = "regexp")]
    pub fn with_regexp(mut self) -> Self {
        self.register_regexp_function = true;
        self
    }

    #[cfg_attr(not(feature = "load-extension"), expect(unused_mut))]
    pub(crate) fn apply_driver_config(
        mut self,
        config: &config::drivers::SqliteConfig,
    ) -> crate::Result<Self> {
        #[cfg(feature = "load-extension")]
        for extension in &config.unsafe_load_extensions {
            // SAFETY: the documentation warns the user about loading extensions
            match extension {
                config::drivers::SqliteExtension::Path(path) => {
                    self = unsafe { self.extension(path.clone()) }
                }
                config::drivers::SqliteExtension::PathWithEntrypoint { path, entrypoint } => {
                    self =
                        unsafe { self.extension_with_entrypoint(path.clone(), entrypoint.clone()) }
                }
            }
        }

        #[cfg(not(feature = "load-extension"))]
        if !config.unsafe_load_extensions.is_empty() {
            return Err(sqlx_core::Error::Configuration(
                format!(
                    "sqlx.toml specifies `drivers.sqlite.unsafe-load-extensions = {:?}` \
                 but extension loading is not enabled; \
                 enable the `sqlite-load-extension` feature of SQLx to use SQLite extensions",
                    config.unsafe_load_extensions,
                )
                .into(),
            ));
        }

        Ok(self)
    }
}