LOGCXX-232: Remove stray performance.xml
diff --git a/src/test/resources/performance.xml b/src/test/resources/performance.xml
deleted file mode 100644
index 1f7b4aa..0000000
--- a/src/test/resources/performance.xml
+++ /dev/null
@@ -1,166 +0,0 @@
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements. See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-
--->
-<project name="log4cxx-performance" default="usage" basedir="." >
-
- <property name="runlen" value="100000"/>
- <property name="loop" value="char"/>
- <property name="debug" value="true"/>
- <property name="log4cxx.lib.type" value="shared"/>
-
- <target name="usage">
- <echo>
- These are the targets supported by this ANT build scpript:
-
- all - run all performance tests
- null - run performance tests using NullAppender
- file - run performance tests using FileAppender
- file-noflush - run performance tests using FileAppender without immediate flush
- file-bufferedio - run performance tests using FileAppender without buffered IO
- telnet - run performace tests with TelnetAppender
-
- -Dloop=[char wide stream wide-stream bad-stream bad-wide-stream]
- -Drunlen=100000
- </echo>
- </target>
-
- <target name="clean">
- <delete>
- <fileset dir="./output/" includes="**"/>
- </delete>
- </target>
-
- <target name="all" depends="off, null, file, file-noflush, file-bufferedio"/>
-
-
- <target name="off">
- <echo message="*** logging with hierarchy threshold = off ***"/>
- <antcall target="loop-group">
- <param name="configFile" value="input/performance/off.xml"/>
- </antcall>
- </target>
-
- <target name="null">
- <echo message="*** logging with NullAppender ***"/>
- <antcall target="loop-group">
- <param name="configFile" value="input/performance/null-appender.xml"/>
- </antcall>
- </target>
-
- <target name="file" depends="clean">
- <echo message="*** logging with FileAppender ***"/>
- <antcall target="loop-group">
- <param name="configFile" value="input/performance/file.xml"/>
- </antcall>
- </target>
-
- <target name="file-noflush" depends="clean">
- <echo message="*** logging with FileAppender, ImmediateFlush=false ***"/>
- <antcall target="loop-group">
- <param name="configFile" value="input/performance/file-noflush.xml"/>
- </antcall>
- </target>
-
- <target name="file-bufferedio" depends="clean">
- <echo message="*** logging with FileAppender, BufferedIO=true ***"/>
- <antcall target="loop-group">
- <param name="configFile" value="input/performance/file-bufferedio.xml"/>
- </antcall>
- </target>
-
- <target name="telnet" depends="clean">
- <echo message="*** logging with TelnetAppender ***"/>
- <antcall target="loop-group">
- <param name="configFile" value="input/performance/telnet.xml"/>
- </antcall>
- </target>
-
-
-
- <target name="loop">
- <condition property="lib-suffix" value="d">
- <istrue value="${debug}"/>
- </condition>
- <property name="lib-suffix" value=""/>
- <condition property="log4cxx.lib.dir" value="../build/debug/${log4cxx.lib.type}">
- <istrue value="${debug}"/>
- </condition>
- <property name="log4cxx.lib.dir" value="../build/release/${log4cxx.lib.type}"/>
- <property name="apr.lib.dir" value="${log4cxx.lib.dir}"/>
- <property name="aprutil.lib.dir" value="${apr.lib.dir}"/>
- <property name="apriconv.lib.dir" value="${aprutil.lib.dir}"/>
-
- <echo message="Pattern is ${pattern}"/>
-
- <exec executable="${log4cxx.lib.dir}/performance">
- <arg value="${runlen}"/>
- <arg value="${configFile}"/>
- <arg value="${loop}"/>
- <env key="pattern" value="${pattern}"/>
- <env key="LD_LIBRARY_PATH"
- value="${log4cxx.lib.dir}:${apr.lib.dir}:${aprutil.lib.dir}:${apriconv.lib.dir}:${env.LD_LIBRARY_PATH}"/>
- <env key="DYLD_LIBRARY_PATH"
- value="${log4cxx.lib.dir}:${apr.lib.dir}:${aprutil.lib.dir}:${apriconv.lib.dir}:${env.DYLD_LIBRARY_PATH}"/>
- </exec>
- </target>
-
- <target name="loop-group">
- <mkdir dir="output"/>
- <antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%p - %m%n"/>
- </antcall>
- <antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%-5p - %m%n"/>
- </antcall>
- <antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%r [%t] %-5p %c{2} %x - %m%n"/>
- </antcall>
- <antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%r [%t] %-5p %.10c %x - %m%n"/>
- </antcall>
- <antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%r [%t] %-5p %.20c %x - %m%n"/>
- </antcall>
- <antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%r [%t] %-5p %c - %m%n"/>
- </antcall>
- <antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%d{ISO8601} [%t] %-5p %c %x - %m%n"/>
- </antcall>
- <antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%d{yyyy-MM-dd HH:mm:ss,SSS} [%t] %-5p %c %x - %m%n"/>
- </antcall>
- <antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%l - %m%n"/>
- </antcall>
- <!-- antcall target="loop">
- <param name="configFile" value="${configFile}"/>
- <param name="pattern" value="%C.%M.%L - %m%n"/>
- </antcall -->
- </target>
-
-
-</project>
