thirdparty/vars.sh - kudu - Git at Google

 # Licensed to the Apache Software Foundation (ASF) under one
 # or more contributor license agreements.  See the NOTICE file
 # distributed with this work for additional information
 # regarding copyright ownership.  The ASF licenses this file
 # to you under the Apache License, Version 2.0 (the
 # "License"); you may not use this file except in compliance
 # with the License.  You may obtain a copy of the License at
 #
 #   http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing,
 # software distributed under the License is distributed on an
 # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 # KIND, either express or implied.  See the License for the
 # specific language governing permissions and limitations
 # under the License.

 # This URL corresponds to the CloudFront Distribution for the S3
 # bucket cloudera-thirdparty-libs which is directly accessible at
 # http://cloudera-thirdparty-libs.s3.amazonaws.com/
 CLOUDFRONT_URL_PREFIX=http://d3dr9sfxru4sde.cloudfront.net

 PREFIX_COMMON=$TP_DIR/installed
 PREFIX_DEPS=$TP_DIR/installed-deps
 PREFIX_DEPS_TSAN=$TP_DIR/installed-deps-tsan

 # libstdcxx needs its own prefix so that it is not inadvertently
 # included in the library search path during non-TSAN builds.
 PREFIX_LIBSTDCXX=$PREFIX_DEPS/gcc
 PREFIX_LIBSTDCXX_TSAN=$PREFIX_DEPS_TSAN/gcc

 GFLAGS_VERSION=2.1.2
 GFLAGS_DIR=$TP_DIR/gflags-$GFLAGS_VERSION

 GLOG_VERSION=0.3.4
 GLOG_DIR=$TP_DIR/glog-$GLOG_VERSION

 GMOCK_VERSION=1.7.0
 GMOCK_DIR=$TP_DIR/gmock-$GMOCK_VERSION

 GPERFTOOLS_VERSION=2.2.1
 GPERFTOOLS_DIR=$TP_DIR/gperftools-$GPERFTOOLS_VERSION

 PROTOBUF_VERSION=2.6.1
 PROTOBUF_DIR=$TP_DIR/protobuf-$PROTOBUF_VERSION

 CMAKE_VERSION=3.2.3
 CMAKE_DIR=$TP_DIR/cmake-${CMAKE_VERSION}

 SNAPPY_VERSION=1.1.0
 SNAPPY_DIR=$TP_DIR/snappy-$SNAPPY_VERSION

 LZ4_VERSION=r130
 LZ4_DIR=$TP_DIR/lz4-lz4-$LZ4_VERSION

 # from https://github.com/kiyo-masui/bitshuffle
 # Hash of git: 55f9b4caec73fa21d13947cacea1295926781440
 BITSHUFFLE_VERSION=55f9b4c
 BITSHUFFLE_DIR=$TP_DIR/bitshuffle-${BITSHUFFLE_VERSION}

 ZLIB_VERSION=1.2.8
 ZLIB_DIR=$TP_DIR/zlib-$ZLIB_VERSION

 LIBEV_VERSION=4.20
 LIBEV_DIR=$TP_DIR/libev-$LIBEV_VERSION

 RAPIDJSON_VERSION=0.11
 RAPIDJSON_DIR=$TP_DIR/rapidjson-${RAPIDJSON_VERSION}

 # Hash of the squeasel git revision to use.
 # (from http://github.com/cloudera/squeasel)
 #
 # To re-build this tarball use the following in the squeasel repo:
 #  export NAME=squeasel-$(git rev-parse HEAD)
 #  git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
 #  s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
 #
 # File a HD ticket for access to the cloudera-dev AWS instance to push to S3.
 SQUEASEL_VERSION=8ac777a122fccf0358cb8562e900f8e9edd9ed11
 SQUEASEL_DIR=$TP_DIR/squeasel-${SQUEASEL_VERSION}

 # git revision of google style guide:
 # https://github.com/google/styleguide
 # git archive --prefix=google-styleguide-$(git rev-parse HEAD)/ -o /tmp/google-styleguide-$(git rev-parse HEAD).tgz HEAD
 GSG_VERSION=7a179d1ac2e08a5cc1622bec900d1e0452776713
 GSG_DIR=$TP_DIR/google-styleguide-${GSG_VERSION}

 GCOVR_VERSION=3.0
 GCOVR_DIR=$TP_DIR/gcovr-${GCOVR_VERSION}

 CURL_VERSION=7.32.0
 CURL_DIR=$TP_DIR/curl-${CURL_VERSION}

 # Hash of the crcutil git revision to use.
 # (from http://github.mtv.cloudera.com/CDH/crcutil)
 #
 # To re-build this tarball use the following in the crcutil repo:
 #  export NAME=crcutil-$(git rev-parse HEAD)
 #  git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
 #  s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
 CRCUTIL_VERSION=440ba7babeff77ffad992df3a10c767f184e946e
 CRCUTIL_DIR=$TP_DIR/crcutil-${CRCUTIL_VERSION}

 LIBUNWIND_VERSION=1.1a
 LIBUNWIND_DIR=$TP_DIR/libunwind-${LIBUNWIND_VERSION}

 # Our llvm tarball includes clang, extra clang tools, lld, and compiler-rt.
 #
 # See http://clang.llvm.org/get_started.html and http://lld.llvm.org/ for
 # details on how they're laid out in the llvm tarball.
 #
 # Summary:
 # 1. Unpack the llvm tarball
 # 2. Unpack the clang tarball into the llvm tree as tools/clang (rename from cfe-<version> to clang)
 # 3. Unpack the extra clang tools tarball as tools/clang/tools/clang-tools-extra
 # 4. Unpack the lld tarball into the llvm tree as tools/lld
 # 5. Unpack the compiler-rt tarball as projects/compiler-rt
 # 6. Create new tarball from the resulting source tree
 #
 LLVM_VERSION=3.8.0
 LLVM_DIR=$TP_DIR/llvm-${LLVM_VERSION}.src
 LLVM_BUILD_DIR=$TP_DIR/llvm-${LLVM_VERSION}.build

 # Python 2.7 is required to build LLVM 3.6+. It is only built and installed if
 # the system Python version is not 2.7.
 PYTHON_VERSION=2.7.10
 PYTHON_DIR=$TP_DIR/python-${PYTHON_VERSION}

 GCC_VERSION=4.9.3
 GCC_DIR=${TP_DIR}/gcc-${GCC_VERSION}
 GCC_BUILD_DIR=${GCC_DIR}.build

 # Our trace-viewer repository is separate since it's quite large and
 # shouldn't change frequently. We upload the built artifacts (HTML/JS)
 # when we need to roll to a new revision.
 #
 # The source can be found at https://github.com/cloudera/kudu-trace-viewer
 # and built with "kudu-build.sh" included within the repository.
 TRACE_VIEWER_VERSION=45f6525d8aa498be53e4137fb73a9e9e036ce91d
 TRACE_VIEWER_DIR=$TP_DIR/kudu-trace-viewer-${TRACE_VIEWER_VERSION}

 NVML_VERSION=1.1
 NVML_DIR=$TP_DIR/nvml-$NVML_VERSION

 BOOST_VERSION=1_61_0
 BOOST_DIR=$TP_DIR/boost_$BOOST_VERSION
	# Licensed to the Apache Software Foundation (ASF) under one
	# or more contributor license agreements. See the NOTICE file
	# distributed with this work for additional information
	# regarding copyright ownership. The ASF licenses this file
	# to you under the Apache License, Version 2.0 (the
	# "License"); you may not use this file except in compliance
	# with the License. You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing,
	# software distributed under the License is distributed on an
	# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	# KIND, either express or implied. See the License for the
	# specific language governing permissions and limitations
	# under the License.

	# This URL corresponds to the CloudFront Distribution for the S3
	# bucket cloudera-thirdparty-libs which is directly accessible at
	# http://cloudera-thirdparty-libs.s3.amazonaws.com/
	CLOUDFRONT_URL_PREFIX=http://d3dr9sfxru4sde.cloudfront.net

	PREFIX_COMMON=$TP_DIR/installed
	PREFIX_DEPS=$TP_DIR/installed-deps
	PREFIX_DEPS_TSAN=$TP_DIR/installed-deps-tsan

	# libstdcxx needs its own prefix so that it is not inadvertently
	# included in the library search path during non-TSAN builds.
	PREFIX_LIBSTDCXX=$PREFIX_DEPS/gcc
	PREFIX_LIBSTDCXX_TSAN=$PREFIX_DEPS_TSAN/gcc

	GFLAGS_VERSION=2.1.2
	GFLAGS_DIR=$TP_DIR/gflags-$GFLAGS_VERSION

	GLOG_VERSION=0.3.4
	GLOG_DIR=$TP_DIR/glog-$GLOG_VERSION

	GMOCK_VERSION=1.7.0
	GMOCK_DIR=$TP_DIR/gmock-$GMOCK_VERSION

	GPERFTOOLS_VERSION=2.2.1
	GPERFTOOLS_DIR=$TP_DIR/gperftools-$GPERFTOOLS_VERSION

	PROTOBUF_VERSION=2.6.1
	PROTOBUF_DIR=$TP_DIR/protobuf-$PROTOBUF_VERSION

	CMAKE_VERSION=3.2.3
	CMAKE_DIR=$TP_DIR/cmake-${CMAKE_VERSION}

	SNAPPY_VERSION=1.1.0
	SNAPPY_DIR=$TP_DIR/snappy-$SNAPPY_VERSION

	LZ4_VERSION=r130
	LZ4_DIR=$TP_DIR/lz4-lz4-$LZ4_VERSION

	# from https://github.com/kiyo-masui/bitshuffle
	# Hash of git: 55f9b4caec73fa21d13947cacea1295926781440
	BITSHUFFLE_VERSION=55f9b4c
	BITSHUFFLE_DIR=$TP_DIR/bitshuffle-${BITSHUFFLE_VERSION}

	ZLIB_VERSION=1.2.8
	ZLIB_DIR=$TP_DIR/zlib-$ZLIB_VERSION

	LIBEV_VERSION=4.20
	LIBEV_DIR=$TP_DIR/libev-$LIBEV_VERSION

	RAPIDJSON_VERSION=0.11
	RAPIDJSON_DIR=$TP_DIR/rapidjson-${RAPIDJSON_VERSION}

	# Hash of the squeasel git revision to use.
	# (from http://github.com/cloudera/squeasel)
	#
	# To re-build this tarball use the following in the squeasel repo:
	# export NAME=squeasel-$(git rev-parse HEAD)
	# git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
	# s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
	#
	# File a HD ticket for access to the cloudera-dev AWS instance to push to S3.
	SQUEASEL_VERSION=8ac777a122fccf0358cb8562e900f8e9edd9ed11
	SQUEASEL_DIR=$TP_DIR/squeasel-${SQUEASEL_VERSION}

	# git revision of google style guide:
	# https://github.com/google/styleguide
	# git archive --prefix=google-styleguide-$(git rev-parse HEAD)/ -o /tmp/google-styleguide-$(git rev-parse HEAD).tgz HEAD
	GSG_VERSION=7a179d1ac2e08a5cc1622bec900d1e0452776713
	GSG_DIR=$TP_DIR/google-styleguide-${GSG_VERSION}

	GCOVR_VERSION=3.0
	GCOVR_DIR=$TP_DIR/gcovr-${GCOVR_VERSION}

	CURL_VERSION=7.32.0
	CURL_DIR=$TP_DIR/curl-${CURL_VERSION}

	# Hash of the crcutil git revision to use.
	# (from http://github.mtv.cloudera.com/CDH/crcutil)
	#
	# To re-build this tarball use the following in the crcutil repo:
	# export NAME=crcutil-$(git rev-parse HEAD)
	# git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
	# s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
	CRCUTIL_VERSION=440ba7babeff77ffad992df3a10c767f184e946e
	CRCUTIL_DIR=$TP_DIR/crcutil-${CRCUTIL_VERSION}

	LIBUNWIND_VERSION=1.1a
	LIBUNWIND_DIR=$TP_DIR/libunwind-${LIBUNWIND_VERSION}

	# Our llvm tarball includes clang, extra clang tools, lld, and compiler-rt.
	#
	# See http://clang.llvm.org/get_started.html and http://lld.llvm.org/ for
	# details on how they're laid out in the llvm tarball.
	#
	# Summary:
	# 1. Unpack the llvm tarball
	# 2. Unpack the clang tarball into the llvm tree as tools/clang (rename from cfe-<version> to clang)
	# 3. Unpack the extra clang tools tarball as tools/clang/tools/clang-tools-extra
	# 4. Unpack the lld tarball into the llvm tree as tools/lld
	# 5. Unpack the compiler-rt tarball as projects/compiler-rt
	# 6. Create new tarball from the resulting source tree
	#
	LLVM_VERSION=3.8.0
	LLVM_DIR=$TP_DIR/llvm-${LLVM_VERSION}.src
	LLVM_BUILD_DIR=$TP_DIR/llvm-${LLVM_VERSION}.build

	# Python 2.7 is required to build LLVM 3.6+. It is only built and installed if
	# the system Python version is not 2.7.
	PYTHON_VERSION=2.7.10
	PYTHON_DIR=$TP_DIR/python-${PYTHON_VERSION}

	GCC_VERSION=4.9.3
	GCC_DIR=${TP_DIR}/gcc-${GCC_VERSION}
	GCC_BUILD_DIR=${GCC_DIR}.build

	# Our trace-viewer repository is separate since it's quite large and
	# shouldn't change frequently. We upload the built artifacts (HTML/JS)
	# when we need to roll to a new revision.
	#
	# The source can be found at https://github.com/cloudera/kudu-trace-viewer
	# and built with "kudu-build.sh" included within the repository.
	TRACE_VIEWER_VERSION=45f6525d8aa498be53e4137fb73a9e9e036ce91d
	TRACE_VIEWER_DIR=$TP_DIR/kudu-trace-viewer-${TRACE_VIEWER_VERSION}

	NVML_VERSION=1.1
	NVML_DIR=$TP_DIR/nvml-$NVML_VERSION

	BOOST_VERSION=1_61_0
	BOOST_DIR=$TP_DIR/boost_$BOOST_VERSION