| ################################################################################ |
| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| ################################################################################ |
| |
| # |
| # see: https://ops4j1.jira.com/wiki/display/paxurl/Aether+Configuration |
| # |
| |
| # |
| # Path to the local Maven settings file. |
| # The repositories defined in this file will be automatically added to the list |
| # of default repositories if the 'org.ops4j.pax.url.mvn.repositories' property |
| # below is not set. |
| # The following locations are checked for the existence of the settings.xml file |
| # * 1. looks for the specified url |
| # * 2. if not found looks for ${user.home}/.m2/settings.xml |
| # * 3. if not found looks for ${maven.home}/conf/settings.xml |
| # * 4. if not found looks for ${M2_HOME}/conf/settings.xml |
| # |
| # Properties prefixed with "org.ops4j.pax.url.mvn." have |
| # higher priority except <proxies> element. HTTP proxies should be configured in |
| # settings file |
| org.ops4j.pax.url.mvn.settings=${karaf.etc}/maven-settings.xml |
| |
| # |
| # Path to the local Maven repository which is used to avoid downloading |
| # artifacts when they already exist locally. |
| # The value of this property will be extracted from the settings.xml file |
| # above, or defaulted to: |
| # System.getProperty( "user.home" ) + "/.m2/repository" |
| # leaving this option commented makes the system dependent on external |
| # configuration, which is not always desired |
| # "localRepository" is the target location for artifacts downloaded from |
| # "remote repositories" |
| # by default internal local repository is used to have behavior independent |
| # of the content of ~/.m2/repository |
| org.ops4j.pax.url.mvn.localRepository=${karaf.data}/repository |
| |
| # |
| # Default this to false. It's just weird to use undocumented repos |
| # "false" means that https://repo1.maven.org/maven2@id=central won't be |
| # implicitly used as remote repository |
| # |
| org.ops4j.pax.url.mvn.useFallbackRepositories=false |
| |
| # |
| # Comma separated list of repositories scanned when resolving an artifact. |
| # list of repositories searched in the first place, should contain |
| # ${runtime.home}/${karaf.default.repository}. |
| # if "org.ops4j.pax.url.mvn.localRepository" is defined and it's not |
| # ~/.m2/repository, it's recommended (at least for dev purposes) to add |
| # ~/.m2/repository to defaultRepositories |
| # each of these repositories is checked by aether as "local repository". if |
| # artifact isn't found, "repositories" are searched next |
| # |
| # Those repositories will be checked before iterating through the |
| # below list of repositories and even before the local repository |
| # A repository url can be appended with zero or more of the following flags: |
| # @snapshots : the repository contains snaphots |
| # @noreleases : the repository does not contain any released artifacts |
| # |
| # The following property value will add the system folder as a repo. |
| # |
| #org.ops4j.pax.url.mvn.defaultRepositories=\ |
| # ${karaf.home.uri}${karaf.default.repository}@id=system.repository@snapshots, \ |
| # file:${user.home}/.m2/repository@snapshots@id=local, \ |
| # ${karaf.data.uri}kar@id=kar.repository@multi@snapshots, \ |
| # ${karaf.base.uri}${karaf.default.repository}@id=child.system.repository@snapshots |
| org.ops4j.pax.url.mvn.defaultRepositories=\ |
| ${karaf.home.uri}${karaf.default.repository}@id=system.repository@snapshots, \ |
| file:${user.home}/.m2/repository@snapshots@id=local |
| |
| # |
| # if "defaultLocalRepoAsRemote" is set to *any* value, localRepository will be |
| # added to the list of remote repositories being searched for artifacts |
| # |
| #org.ops4j.pax.url.mvn.defaultLocalRepoAsRemote = true |
| |
| # |
| # Comma separated list of repositories scanned when resolving an artifact. |
| # list of repositories searched after resolution fails for "defaultRepositories" |
| # These are true remote repositories accessed using maven/aether/wagon |
| # mechanisms. If any repository contains required artifact, it is then written |
| # to "localRepository" |
| # |
| # if this list is _prepended_ with '+' sign, all repositories from active |
| # profiles defined in effective settings.xml file will be _appended_ to this |
| # list |
| # A repository url can be appended with zero or more of the following flags: |
| # @snapshots : the repository contains snapshots |
| # @noreleases : the repository does not contain any released artifacts |
| # @id=repository.id : the id for the repository, just like in the |
| # settings.xml this is optional but recommended |
| # |
| org.ops4j.pax.url.mvn.repositories= \ |
| https://repo1.maven.org/maven2@id=central |
| |
| # |
| # Global policies override repository-specific settings (@checksum=..., @update=..., @releasesUpdate=..., ...) |
| # |
| org.ops4j.pax.url.mvn.globalUpdatePolicy = daily |
| org.ops4j.pax.url.mvn.globalChecksumPolicy = warn |
| |
| # |
| # socket and connection configuration (pax-url-aether 2.5.0) |
| # |
| # default value for connection and read timeouts, when socket.readTimeout and socket.connectionTimeout |
| # are not specified |
| org.ops4j.pax.url.mvn.timeout = 5000 |
| # timeout in ms when establishing http connection during artifact resolution |
| org.ops4j.pax.url.mvn.socket.connectionTimeout = 5000 |
| # timeout in ms when reading data after connecting to remote repository |
| org.ops4j.pax.url.mvn.socket.readTimeout = 30000 |
| # SO_KEEPALIVE option for sockets, defaults to false |
| org.ops4j.pax.url.mvn.socket.keepAlive = false |
| # SO_LINGER option for sockets, defaults to -1 |
| org.ops4j.pax.url.mvn.socket.linger = -1 |
| # SO_REUSEADDR option for sockets, defaults to false |
| org.ops4j.pax.url.mvn.socket.reuseAddress = false |
| # TCP_NODELAY option for sockets, defaults to true |
| org.ops4j.pax.url.mvn.socket.tcpNoDelay = true |
| # Configure buffer size for HTTP connections (output and input buffers), defaults to 8192 bytes |
| org.ops4j.pax.url.mvn.connection.bufferSize = 8192 |
| # Number of connection retries after failure is detected in http client. httpclient uses default value "3" |
| org.ops4j.pax.url.mvn.connection.retryCount = 3 |
