| ################################################################################ |
| # Apache JMeter Property file - used for unit tests only |
| ################################################################################ |
| |
| ## Licensed to the Apache Software Foundation (ASF) under one or more |
| ## contributor license agreements. See the NOTICE file distributed with |
| ## this work for additional information regarding copyright ownership. |
| ## The ASF licenses this file to You under the Apache License, Version 2.0 |
| ## (the "License"); you may not use this file except in compliance with |
| ## the License. You may obtain a copy of the License at |
| ## |
| ## http://www.apache.org/licenses/LICENSE-2.0 |
| ## |
| ## Unless required by applicable law or agreed to in writing, software |
| ## distributed under the License is distributed on an "AS IS" BASIS, |
| ## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ## See the License for the specific language governing permissions and |
| ## limitations under the License. |
| |
| #Preferred GUI language. Comment out to use the JVM default locale's language. |
| #language=de |
| |
| #Paths to search for classes (";" must be the separator) |
| #search_paths=null |
| |
| # Netscape HTTP Cookie file |
| cookies=cookies |
| |
| #File format for saved test files. |
| # JMeter 2.1+ uses a new format for JMX and JTL files - using XStream. |
| # JMeter 2.1.2+ has a new shorter format for JMX files. |
| # Set value to 2.0 or 2.1 to save to old formats |
| # |
| # Save test plans and test logs in 2.0 format |
| #file_format=2.0 |
| # Just test plans (jmx) |
| #file_format.testplan=2.1 |
| # Just test logs (jtl) |
| #file_format.testlog=2.0 |
| |
| # Authorization |
| authorization=authorization |
| |
| #Working directory |
| user.dir=. |
| |
| # XML Reader(Parser) - Must implement SAX 2 specs |
| xml.parser=org.apache.xerces.parsers.SAXParser |
| |
| #Classname of the ssl provider to be used (to enable testing of https urls) |
| #And the package name where Stream Handlers can be found |
| #These provided defaults can be uncommented, and they will work if you are using |
| #Sun's JSSE implementation. |
| |
| #ssl.provider=com.sun.net.ssl.internal.ssl.Provider |
| #ssl.pkgs=com.sun.net.ssl.internal.www.protocol |
| |
| #The location of the truststore (trusted certificates) and keystore ( if other than the default. |
| #you can uncomment this and change the path to the correct location. |
| #javax.net.ssl.trustStore=/path/to/cacerts |
| #javax.net.ssl.keyStore=/path/to/keystore |
| |
| #The password to your keystore |
| #javax.net.ssl.keyStorePassword=password |
| |
| |
| #Flag for whether to output debug messages to System.err |
| #To enable it, set the value to "all" Note, for it to work with |
| #JSSE, it needs to be done from the Java command (i.e. -Djavax.net.debug=all) |
| #javax.net.debug=all |
| |
| #Classname of the Swing default UI |
| #Installed Look and Feel classes on Windows are: |
| # Metal = javax.swing.plaf.metal.MetalLookAndFeel |
| # Motif = com.sun.java.swing.plaf.motif.MotifLookAndFeel |
| # Windows = com.sun.java.swing.plaf.windows.WindowsLookAndFeel |
| ## Let LAF be picked up from default |
| ## (otherwise can cause problems for Eclipse JUnit GUI mode) |
| #jmeter.laf=javax.swing.plaf.metal.MetalLookAndFeel |
| #jmeter.laf=com.sun.java.swing.plaf.motif.MotifLookAndFeel |
| |
| #icons -> moved to program code |
| #timer.tree.icon=timer.gif |
| #listener.tree.icon=ear.gif |
| #bench.tree.icon=clipboard.gif |
| #thread.tree.icon=thread.gif |
| #control.tree.icon=knob.gif |
| #plan.tree.icon=beaker.gif |
| #config.tree.icon=leafnode.gif |
| |
| # Remote Hosts - comma delimited |
| remote_hosts=127.0.0.1 |
| |
| #Components to not display in JMeter GUI |
| not_in_menu=Remote Method Configuration,JNDI Configuration,JNDI Lookup Configuration,JNDI Request,Default Controller,org.apache.jmeter.control.DynamicController, org.apache.jmeter.protocol.http.control.Cookie,org.apache.jmeter.protocol.http.control.Authorization,org.apache.jmeter.config.LoginConfig,Header,org.apache.jmeter.protocol.http.config.MultipartUrlConfig |
| |
| #Logging levels for the logging categories in JMeter. Correct values are FATAL_ERROR, ERROR, WARN, INFO, and DEBUG |
| # To set the log level for a package or individual class, use: |
| # log_level.[package_name].[classname]=[PRIORITY_LEVEL] |
| # But omit "org.apache" from the package name. The classname is optional. Further examples below. |
| |
| log_level.jmeter=INFO |
| #log_level.jmeter.junit=DEBUG |
| #log_level.jmeter.engine=WARN |
| #log_level.jmeter.gui=WARN |
| #log_level.jmeter.testelement=DEBUG |
| #log_level.jmeter.util=WARN |
| #log_level.jmeter.util.classfinder=WARN |
| #log_level.jmeter.test=DEBUG |
| #log_level.jmeter.protocol.http=DEBUG |
| #log_level.jmeter.protocol.ftp=WARN |
| #log_level.jmeter.protocol.jdbc=WARN |
| #log_level.jmeter.protocol.java=WARN |
| #log_level.jmeter.testelements.property=DEBUG |
| log_level.jorphan=INFO |
| #log_level.jorphan.reflect.ClassFinder=DEBUG |
| |
| #Log file for log messages. |
| # You can specify a different log file for different categories via: |
| # log_file.[category]=[filename] |
| # category is equivalent to the package/class names described above |
| |
| # Combined log file (for jmeter and jorphan) |
| log_file=jmeter-test.log |
| |
| # Or define separate logs if required: |
| #log_file.jorphan=jorphan.log |
| #log_file.jmeter=jmeter.log |
| |
| |
| #--------------------------------------------------------------------------- |
| # Results file configuration |
| #--------------------------------------------------------------------------- |
| |
| # For testing, output is changed to CSV and variable fields |
| # (timestamp and elased) are suppressed |
| |
| # This section helps determine how result data will be saved. |
| # The commented out values are the defaults. |
| |
| # legitimate values: xml, csv, db. Only xml and csv are currently supported. |
| jmeter.save.saveservice.output_format=csv |
| |
| # Define true to save the output files in TestSaveService.java |
| #testsaveservice.saveout=true |
| |
| # true when field should be saved; false otherwise |
| |
| # assertion_results_failure_message only affects CSV output |
| #jmeter.save.saveservice.assertion_results_failure_message=true |
| #jmeter.save.saveservice.data_type=true |
| #jmeter.save.saveservice.label=true |
| #jmeter.save.saveservice.response_code=true |
| #jmeter.save.saveservice.response_data=false |
| #jmeter.save.saveservice.response_message=true |
| #jmeter.save.saveservice.successful=true |
| #jmeter.save.saveservice.thread_name=true |
| jmeter.save.saveservice.time=false |
| # Since JMeter 2.12, defaults for this property is true |
| jmeter.save.saveservice.thread_counts=false |
| |
| # legitimate values: none, ms, or a format suitable for SimpleDateFormat |
| #jmeter.save.saveservice.timestamp_format=none |
| #jmeter.save.saveservice.timestamp_format=MM/dd/yy HH:mm:ss |
| |
| # legitimate values: none, first, all |
| #jmeter.save.saveservice.assertion_results=none |
| |
| # For use with Comma-separated value (CSV) files or other formats |
| # where the fields' values are separated by specified delimiters. |
| #jmeter.save.saveservice.default_delimiter=, |
| #jmeter.save.saveservice.print_field_names=true |
| |
| # File that holds a record of name changes for backward compatibility issues |
| upgrade_properties=/bin/upgrade.properties |
