| #!/bin/bash |
| # |
| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # |
| |
| |
| source "$(dirname "$0")/iotdb-common.sh" |
| |
| # iotdb server runs on foreground by default |
| foreground="yes" |
| |
| IOTDB_HEAP_DUMP_COMMAND="" |
| |
| if [ $# -ne 0 ]; then |
| echo "All parameters are $*" |
| fi |
| |
| while true; do |
| case "$1" in |
| -c) |
| IOTDB_CONF="$2" |
| shift 2 |
| ;; |
| -p) |
| pidfile="$2" |
| shift 2 |
| ;; |
| -f) |
| foreground="yes" |
| shift |
| ;; |
| -d) |
| foreground="" |
| shift |
| ;; |
| -g) |
| PRINT_GC="yes" |
| shift |
| ;; |
| -H) |
| IOTDB_HEAP_DUMP_COMMAND="$IOTDB_HEAP_DUMP_COMMAND -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=$2" |
| shift 2 |
| ;; |
| -E) |
| IOTDB_JVM_OPTS="$IOTDB_JVM_OPTS -XX:ErrorFile=$2" |
| shift 2 |
| ;; |
| -D) |
| IOTDB_JVM_OPTS="$IOTDB_JVM_OPTS -D$2" |
| #checkEnvVariables is in iotdb-common.sh |
| checkEnvVariables "$2" |
| shift 2 |
| ;; |
| -X) |
| IOTDB_JVM_OPTS="$IOTDB_JVM_OPTS -XX:$2" |
| shift 2 |
| ;; |
| -h) |
| echo "Usage: $0 [-v] [-f] [-d] [-h] [-p pidfile] [-c configFolder] [-H HeapDumpPath] [-E JvmErrorFile] [printgc]" |
| exit 0 |
| ;; |
| -v) |
| SHOW_VERSION="yes" |
| break |
| ;; |
| --) |
| shift |
| #all others are args to the program |
| PARAMS=$* |
| break |
| ;; |
| "") |
| #if we do not use getopt, we then have to process the case that there is no argument. |
| #in some systems, when there is no argument, shift command may throw error, so we skip directly |
| #all others are args to the program |
| PARAMS=$* |
| break |
| ;; |
| *) |
| echo "Error parsing arguments! Unknown argument \"$1\"" >&2 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| if [ "$(id -u)" -ne 0 ]; then |
| echo "Notice: in some systems, DataNode must run in sudo mode to write data. The process may fail." |
| fi |
| |
| #checkAllVariables is in iotdb-common.sh |
| checkAllVariables |
| |
| #checkDataNodePortUsages is in iotdb-common.sh |
| checkDataNodePortUsages |
| |
| CLASSPATH="" |
| for f in "${IOTDB_HOME}"/lib/*.jar; do |
| CLASSPATH=${CLASSPATH}":"$f |
| done |
| |
| classname=org.apache.iotdb.db.service.DataNode |
| |
| |
| if [ "x$SHOW_VERSION" != "x" ]; then |
| classname=org.apache.iotdb.db.service.GetVersion |
| IOTDB_LOG_CONFIG="${IOTDB_CONF}/logback-tool.xml" |
| # find java in JAVA_HOME |
| if [ -n "$JAVA_HOME" ]; then |
| for java in "$JAVA_HOME"/bin/amd64/java "$JAVA_HOME"/bin/java; do |
| if [ -x "$java" ]; then |
| JAVA="$java" |
| break |
| fi |
| done |
| else |
| JAVA=java |
| fi |
| exec "$JAVA" -cp "$CLASSPATH" $IOTDB_JVM_OPTS "-Dlogback.configurationFile=${IOTDB_LOG_CONFIG}" "$classname" |
| exit 0 |
| fi |
| |
| echo --------------------- |
| echo "Starting IoTDB DataNode" |
| echo --------------------- |
| |
| #initEnv is in iotdb-common.sh |
| initEnv |
| |
| # check whether we can enable heap dump when oom |
| if [ "x$IOTDB_ALLOW_HEAP_DUMP" == "xtrue" ]; then |
| IOTDB_JVM_OPTS="$IOTDB_JVM_OPTS $IOTDB_HEAP_DUMP_COMMAND" |
| fi |
| |
| # -s means start a data node. -r means remove a data node. |
| |
| PARAMS="-s $PARAMS" |
| |
| classname=org.apache.iotdb.db.service.DataNode |
| |
| launch_service() |
| { |
| class="$1" |
| iotdb_parms="-Dlogback.configurationFile=${IOTDB_LOG_CONFIG}" |
| iotdb_parms="$iotdb_parms -DIOTDB_HOME=${IOTDB_HOME}" |
| iotdb_parms="$iotdb_parms -DIOTDB_DATA_HOME=${IOTDB_DATA_HOME}" |
| iotdb_parms="$iotdb_parms -DTSFILE_HOME=${IOTDB_HOME}" |
| iotdb_parms="$iotdb_parms -DIOTDB_CONF=${IOTDB_CONF}" |
| iotdb_parms="$iotdb_parms -DTSFILE_CONF=${IOTDB_CONF}" |
| iotdb_parms="$iotdb_parms -Dname=iotdb\.IoTDB" |
| iotdb_parms="$iotdb_parms -DIOTDB_LOG_DIR=${IOTDB_LOG_DIR}" |
| iotdb_parms="$iotdb_parms -DOFF_HEAP_MEMORY=${OFF_HEAP_MEMORY}" |
| |
| if [ "x$pidfile" != "x" ]; then |
| iotdb_parms="$iotdb_parms -Diotdb-pidfile=$pidfile" |
| fi |
| |
| # The iotdb-foreground option will tell IoTDB not to close stdout/stderr, but it's up to us not to background. |
| if [ "x$foreground" == "xyes" ]; then |
| iotdb_parms="$iotdb_parms -Diotdb-foreground=yes" |
| if [ "x$JVM_ON_OUT_OF_MEMORY_ERROR_OPT" != "x" ]; then |
| [ ! -z "$pidfile" ] && printf "%d" $! > "$pidfile" |
| exec $NUMACTL "$JAVA" $JVM_OPTS "$JVM_ON_OUT_OF_MEMORY_ERROR_OPT" $illegal_access_params $iotdb_parms $IOTDB_JMX_OPTS -cp "$CLASSPATH" $IOTDB_JVM_OPTS "$class" $PARAMS |
| else |
| [ ! -z "$pidfile" ] && printf "%d" $! > "$pidfile" |
| exec $NUMACTL "$JAVA" $JVM_OPTS $illegal_access_params $iotdb_parms $IOTDB_JMX_OPTS -cp "$CLASSPATH" $IOTDB_JVM_OPTS "$class" $PARAMS |
| fi |
| # Startup IoTDB, background it, and write the pid. |
| else |
| if [ "x$JVM_ON_OUT_OF_MEMORY_ERROR_OPT" != "x" ]; then |
| exec $NUMACTL "$JAVA" $JVM_OPTS "$JVM_ON_OUT_OF_MEMORY_ERROR_OPT" $illegal_access_params $iotdb_parms $IOTDB_JMX_OPTS -cp "$CLASSPATH" $IOTDB_JVM_OPTS "$class" $PARAMS 2>&1 > /dev/null <&- & |
| [ ! -z "$pidfile" ] && printf "%d" $! > "$pidfile" |
| true |
| else |
| exec $NUMACTL "$JAVA" $JVM_OPTS $illegal_access_params $iotdb_parms $IOTDB_JMX_OPTS -cp "$CLASSPATH" $IOTDB_JVM_OPTS "$class" $PARAMS 2>&1 > /dev/null <&- & |
| [ ! -z "$pidfile" ] && printf "%d" $! > "$pidfile" |
| true |
| fi |
| fi |
| |
| return $? |
| } |
| |
| |
| # check whether tool 'lsof' exists |
| check_tool_env() { |
| if ! type lsof > /dev/null 2>&1 ; then |
| echo "" |
| echo " Warning: No tool 'lsof', Please install it." |
| echo " Note: Some checking function need 'lsof'." |
| echo "" |
| return 1 |
| else |
| return 0 |
| fi |
| } |
| |
| # convert path to real full-path. |
| # e.g., /a/b/c/.. will return /a/b |
| # If path has been deleted, return "" |
| get_real_path() { |
| local path=$1 |
| local real_path="" |
| cd $path > /dev/null 2>&1 |
| if [ $? -eq 0 ] ; then |
| real_path=$(pwd -P) |
| cd - > /dev/null 2>&1 |
| fi |
| echo "${real_path}" |
| } |
| |
| # check whether same directory's IoTDB node process has been running |
| check_running_process() { |
| check_tool_env |
| |
| PIDS=$(ps ax | grep "$classname" | grep java | grep DIOTDB_HOME | grep -v grep | awk '{print $1}') |
| for pid in ${PIDS} |
| do |
| run_conf_path="" |
| # find the abstract path of the process |
| run_cwd=$(lsof -p $pid 2>/dev/null | awk '$4~/cwd/ {print $NF}') |
| # find "-DIOTDB_HOME=XXX" from the process command |
| run_home_path=$(ps -fp $pid | sed "s/ /\n/g" | sed -n "s/-DIOTDB_HOME=//p") |
| run_home_path=$(get_real_path "${run_cwd}/${run_home_path}") |
| |
| #if dir ${run_home_path} has been deleted |
| if [ "${run_home_path}" == "" ]; then |
| continue |
| fi |
| |
| current_home_path=$(get_real_path ${IOTDB_HOME}) |
| if [ "${run_home_path}" == "${current_home_path}" ]; then |
| echo "" |
| echo " Found running IoTDB node (PID=$pid)." >&2 |
| echo " Can not run duplicated IoTDB node!" >&2 |
| echo " Exit..." >&2 |
| echo "" |
| exit 1 |
| fi |
| done |
| } |
| |
| |
| check_tool_env |
| # If needed tool is ready, check whether same directory's IoTDB node is running |
| if [ $? -eq 0 ]; then |
| check_running_process |
| fi |
| |
| # Start up the service |
| launch_service "$classname" |
| |
| exit $? |