apache / incubator-pagespeed-zlib / 61cee2ee4f9996cacb37c57c04d9d526e2811d63 / . / examples / enough.c

/* enough.c -- determine the maximum size of inflate's Huffman code tables over | |

* all possible valid and complete Huffman codes, subject to a length limit. | |

* Copyright (C) 2007, 2008 Mark Adler | |

* Version 1.3 17 February 2008 Mark Adler | |

*/ | |

/* Version history: | |

1.0 3 Jan 2007 First version (derived from codecount.c version 1.4) | |

1.1 4 Jan 2007 Use faster incremental table usage computation | |

Prune examine() search on previously visited states | |

1.2 5 Jan 2007 Comments clean up | |

As inflate does, decrease root for short codes | |

Refuse cases where inflate would increase root | |

1.3 17 Feb 2008 Add argument for initial root table size | |

Fix bug for initial root table size == max - 1 | |

Use a macro to compute the history index | |

*/ | |

/* | |

Examine all possible Huffman codes for a given number of symbols and a | |

maximum code length in bits to determine the maximum table size for zilb's | |

inflate. Only complete Huffman codes are counted. | |

Two codes are considered distinct if the vectors of the number of codes per | |

length are not identical. So permutations of the symbol assignments result | |

in the same code for the counting, as do permutations of the assignments of | |

the bit values to the codes (i.e. only canonical codes are counted). | |

We build a code from shorter to longer lengths, determining how many symbols | |

are coded at each length. At each step, we have how many symbols remain to | |

be coded, what the last code length used was, and how many bit patterns of | |

that length remain unused. Then we add one to the code length and double the | |

number of unused patterns to graduate to the next code length. We then | |

assign all portions of the remaining symbols to that code length that | |

preserve the properties of a correct and eventually complete code. Those | |

properties are: we cannot use more bit patterns than are available; and when | |

all the symbols are used, there are exactly zero possible bit patterns | |

remaining. | |

The inflate Huffman decoding algorithm uses two-level lookup tables for | |

speed. There is a single first-level table to decode codes up to root bits | |

in length (root == 9 in the current inflate implementation). The table | |

has 1 << root entries and is indexed by the next root bits of input. Codes | |

shorter than root bits have replicated table entries, so that the correct | |

entry is pointed to regardless of the bits that follow the short code. If | |

the code is longer than root bits, then the table entry points to a second- | |

level table. The size of that table is determined by the longest code with | |

that root-bit prefix. If that longest code has length len, then the table | |

has size 1 << (len - root), to index the remaining bits in that set of | |

codes. Each subsequent root-bit prefix then has its own sub-table. The | |

total number of table entries required by the code is calculated | |

incrementally as the number of codes at each bit length is populated. When | |

all of the codes are shorter than root bits, then root is reduced to the | |

longest code length, resulting in a single, smaller, one-level table. | |

The inflate algorithm also provides for small values of root (relative to | |

the log2 of the number of symbols), where the shortest code has more bits | |

than root. In that case, root is increased to the length of the shortest | |

code. This program, by design, does not handle that case, so it is verified | |

that the number of symbols is less than 2^(root + 1). | |

In order to speed up the examination (by about ten orders of magnitude for | |

the default arguments), the intermediate states in the build-up of a code | |

are remembered and previously visited branches are pruned. The memory | |

required for this will increase rapidly with the total number of symbols and | |

the maximum code length in bits. However this is a very small price to pay | |

for the vast speedup. | |

First, all of the possible Huffman codes are counted, and reachable | |

intermediate states are noted by a non-zero count in a saved-results array. | |

Second, the intermediate states that lead to (root + 1) bit or longer codes | |

are used to look at all sub-codes from those junctures for their inflate | |

memory usage. (The amount of memory used is not affected by the number of | |

codes of root bits or less in length.) Third, the visited states in the | |

construction of those sub-codes and the associated calculation of the table | |

size is recalled in order to avoid recalculating from the same juncture. | |

Beginning the code examination at (root + 1) bit codes, which is enabled by | |

identifying the reachable nodes, accounts for about six of the orders of | |

magnitude of improvement for the default arguments. About another four | |

orders of magnitude come from not revisiting previous states. Out of | |

approximately 2x10^16 possible Huffman codes, only about 2x10^6 sub-codes | |

need to be examined to cover all of the possible table memory usage cases | |

for the default arguments of 286 symbols limited to 15-bit codes. | |

Note that an unsigned long long type is used for counting. It is quite easy | |

to exceed the capacity of an eight-byte integer with a large number of | |

symbols and a large maximum code length, so multiple-precision arithmetic | |

would need to replace the unsigned long long arithmetic in that case. This | |

program will abort if an overflow occurs. The big_t type identifies where | |

the counting takes place. | |

An unsigned long long type is also used for calculating the number of | |

possible codes remaining at the maximum length. This limits the maximum | |

code length to the number of bits in a long long minus the number of bits | |

needed to represent the symbols in a flat code. The code_t type identifies | |

where the bit pattern counting takes place. | |

*/ | |

#include <stdio.h> | |

#include <stdlib.h> | |

#include <string.h> | |

#include <assert.h> | |

#define local static | |

/* special data types */ | |

typedef unsigned long long big_t; /* type for code counting */ | |

typedef unsigned long long code_t; /* type for bit pattern counting */ | |

struct tab { /* type for been here check */ | |

size_t len; /* length of bit vector in char's */ | |

char *vec; /* allocated bit vector */ | |

}; | |

/* The array for saving results, num[], is indexed with this triplet: | |

syms: number of symbols remaining to code | |

left: number of available bit patterns at length len | |

len: number of bits in the codes currently being assigned | |

Those indices are constrained thusly when saving results: | |

syms: 3..totsym (totsym == total symbols to code) | |

left: 2..syms - 1, but only the evens (so syms == 8 -> 2, 4, 6) | |

len: 1..max - 1 (max == maximum code length in bits) | |

syms == 2 is not saved since that immediately leads to a single code. left | |

must be even, since it represents the number of available bit patterns at | |

the current length, which is double the number at the previous length. | |

left ends at syms-1 since left == syms immediately results in a single code. | |

(left > sym is not allowed since that would result in an incomplete code.) | |

len is less than max, since the code completes immediately when len == max. | |

The offset into the array is calculated for the three indices with the | |

first one (syms) being outermost, and the last one (len) being innermost. | |

We build the array with length max-1 lists for the len index, with syms-3 | |

of those for each symbol. There are totsym-2 of those, with each one | |

varying in length as a function of sym. See the calculation of index in | |

count() for the index, and the calculation of size in main() for the size | |

of the array. | |

For the deflate example of 286 symbols limited to 15-bit codes, the array | |

has 284,284 entries, taking up 2.17 MB for an 8-byte big_t. More than | |

half of the space allocated for saved results is actually used -- not all | |

possible triplets are reached in the generation of valid Huffman codes. | |

*/ | |

/* The array for tracking visited states, done[], is itself indexed identically | |

to the num[] array as described above for the (syms, left, len) triplet. | |

Each element in the array is further indexed by the (mem, rem) doublet, | |

where mem is the amount of inflate table space used so far, and rem is the | |

remaining unused entries in the current inflate sub-table. Each indexed | |

element is simply one bit indicating whether the state has been visited or | |

not. Since the ranges for mem and rem are not known a priori, each bit | |

vector is of a variable size, and grows as needed to accommodate the visited | |

states. mem and rem are used to calculate a single index in a triangular | |

array. Since the range of mem is expected in the default case to be about | |

ten times larger than the range of rem, the array is skewed to reduce the | |

memory usage, with eight times the range for mem than for rem. See the | |

calculations for offset and bit in beenhere() for the details. | |

For the deflate example of 286 symbols limited to 15-bit codes, the bit | |

vectors grow to total approximately 21 MB, in addition to the 4.3 MB done[] | |

array itself. | |

*/ | |

/* Globals to avoid propagating constants or constant pointers recursively */ | |

local int max; /* maximum allowed bit length for the codes */ | |

local int root; /* size of base code table in bits */ | |

local int large; /* largest code table so far */ | |

local size_t size; /* number of elements in num and done */ | |

local int *code; /* number of symbols assigned to each bit length */ | |

local big_t *num; /* saved results array for code counting */ | |

local struct tab *done; /* states already evaluated array */ | |

/* Index function for num[] and done[] */ | |

#define INDEX(i,j,k) (((size_t)((i-1)>>1)*((i-2)>>1)+(j>>1)-1)*(max-1)+k-1) | |

/* Free allocated space. Uses globals code, num, and done. */ | |

local void cleanup(void) | |

{ | |

size_t n; | |

if (done != NULL) { | |

for (n = 0; n < size; n++) | |

if (done[n].len) | |

free(done[n].vec); | |

free(done); | |

} | |

if (num != NULL) | |

free(num); | |

if (code != NULL) | |

free(code); | |

} | |

/* Return the number of possible Huffman codes using bit patterns of lengths | |

len through max inclusive, coding syms symbols, with left bit patterns of | |

length len unused -- return -1 if there is an overflow in the counting. | |

Keep a record of previous results in num to prevent repeating the same | |

calculation. Uses the globals max and num. */ | |

local big_t count(int syms, int len, int left) | |

{ | |

big_t sum; /* number of possible codes from this juncture */ | |

big_t got; /* value returned from count() */ | |

int least; /* least number of syms to use at this juncture */ | |

int most; /* most number of syms to use at this juncture */ | |

int use; /* number of bit patterns to use in next call */ | |

size_t index; /* index of this case in *num */ | |

/* see if only one possible code */ | |

if (syms == left) | |

return 1; | |

/* note and verify the expected state */ | |

assert(syms > left && left > 0 && len < max); | |

/* see if we've done this one already */ | |

index = INDEX(syms, left, len); | |

got = num[index]; | |

if (got) | |

return got; /* we have -- return the saved result */ | |

/* we need to use at least this many bit patterns so that the code won't be | |

incomplete at the next length (more bit patterns than symbols) */ | |

least = (left << 1) - syms; | |

if (least < 0) | |

least = 0; | |

/* we can use at most this many bit patterns, lest there not be enough | |

available for the remaining symbols at the maximum length (if there were | |

no limit to the code length, this would become: most = left - 1) */ | |

most = (((code_t)left << (max - len)) - syms) / | |

(((code_t)1 << (max - len)) - 1); | |

/* count all possible codes from this juncture and add them up */ | |

sum = 0; | |

for (use = least; use <= most; use++) { | |

got = count(syms - use, len + 1, (left - use) << 1); | |

sum += got; | |

if (got == -1 || sum < got) /* overflow */ | |

return -1; | |

} | |

/* verify that all recursive calls are productive */ | |

assert(sum != 0); | |

/* save the result and return it */ | |

num[index] = sum; | |

return sum; | |

} | |

/* Return true if we've been here before, set to true if not. Set a bit in a | |

bit vector to indicate visiting this state. Each (syms,len,left) state | |

has a variable size bit vector indexed by (mem,rem). The bit vector is | |

lengthened if needed to allow setting the (mem,rem) bit. */ | |

local int beenhere(int syms, int len, int left, int mem, int rem) | |

{ | |

size_t index; /* index for this state's bit vector */ | |

size_t offset; /* offset in this state's bit vector */ | |

int bit; /* mask for this state's bit */ | |

size_t length; /* length of the bit vector in bytes */ | |

char *vector; /* new or enlarged bit vector */ | |

/* point to vector for (syms,left,len), bit in vector for (mem,rem) */ | |

index = INDEX(syms, left, len); | |

mem -= 1 << root; | |

offset = (mem >> 3) + rem; | |

offset = ((offset * (offset + 1)) >> 1) + rem; | |

bit = 1 << (mem & 7); | |

/* see if we've been here */ | |

length = done[index].len; | |

if (offset < length && (done[index].vec[offset] & bit) != 0) | |

return 1; /* done this! */ | |

/* we haven't been here before -- set the bit to show we have now */ | |

/* see if we need to lengthen the vector in order to set the bit */ | |

if (length <= offset) { | |

/* if we have one already, enlarge it, zero out the appended space */ | |

if (length) { | |

do { | |

length <<= 1; | |

} while (length <= offset); | |

vector = realloc(done[index].vec, length); | |

if (vector != NULL) | |

memset(vector + done[index].len, 0, length - done[index].len); | |

} | |

/* otherwise we need to make a new vector and zero it out */ | |

else { | |

length = 1 << (len - root); | |

while (length <= offset) | |

length <<= 1; | |

vector = calloc(length, sizeof(char)); | |

} | |

/* in either case, bail if we can't get the memory */ | |

if (vector == NULL) { | |

fputs("abort: unable to allocate enough memory\n", stderr); | |

cleanup(); | |

exit(1); | |

} | |

/* install the new vector */ | |

done[index].len = length; | |

done[index].vec = vector; | |

} | |

/* set the bit */ | |

done[index].vec[offset] |= bit; | |

return 0; | |

} | |

/* Examine all possible codes from the given node (syms, len, left). Compute | |

the amount of memory required to build inflate's decoding tables, where the | |

number of code structures used so far is mem, and the number remaining in | |

the current sub-table is rem. Uses the globals max, code, root, large, and | |

done. */ | |

local void examine(int syms, int len, int left, int mem, int rem) | |

{ | |

int least; /* least number of syms to use at this juncture */ | |

int most; /* most number of syms to use at this juncture */ | |

int use; /* number of bit patterns to use in next call */ | |

/* see if we have a complete code */ | |

if (syms == left) { | |

/* set the last code entry */ | |

code[len] = left; | |

/* complete computation of memory used by this code */ | |

while (rem < left) { | |

left -= rem; | |

rem = 1 << (len - root); | |

mem += rem; | |

} | |

assert(rem == left); | |

/* if this is a new maximum, show the entries used and the sub-code */ | |

if (mem > large) { | |

large = mem; | |

printf("max %d: ", mem); | |

for (use = root + 1; use <= max; use++) | |

if (code[use]) | |

printf("%d[%d] ", code[use], use); | |

putchar('\n'); | |

fflush(stdout); | |

} | |

/* remove entries as we drop back down in the recursion */ | |

code[len] = 0; | |

return; | |

} | |

/* prune the tree if we can */ | |

if (beenhere(syms, len, left, mem, rem)) | |

return; | |

/* we need to use at least this many bit patterns so that the code won't be | |

incomplete at the next length (more bit patterns than symbols) */ | |

least = (left << 1) - syms; | |

if (least < 0) | |

least = 0; | |

/* we can use at most this many bit patterns, lest there not be enough | |

available for the remaining symbols at the maximum length (if there were | |

no limit to the code length, this would become: most = left - 1) */ | |

most = (((code_t)left << (max - len)) - syms) / | |

(((code_t)1 << (max - len)) - 1); | |

/* occupy least table spaces, creating new sub-tables as needed */ | |

use = least; | |

while (rem < use) { | |

use -= rem; | |

rem = 1 << (len - root); | |

mem += rem; | |

} | |

rem -= use; | |

/* examine codes from here, updating table space as we go */ | |

for (use = least; use <= most; use++) { | |

code[len] = use; | |

examine(syms - use, len + 1, (left - use) << 1, | |

mem + (rem ? 1 << (len - root) : 0), rem << 1); | |

if (rem == 0) { | |

rem = 1 << (len - root); | |

mem += rem; | |

} | |

rem--; | |

} | |

/* remove entries as we drop back down in the recursion */ | |

code[len] = 0; | |

} | |

/* Look at all sub-codes starting with root + 1 bits. Look at only the valid | |

intermediate code states (syms, left, len). For each completed code, | |

calculate the amount of memory required by inflate to build the decoding | |

tables. Find the maximum amount of memory required and show the code that | |

requires that maximum. Uses the globals max, root, and num. */ | |

local void enough(int syms) | |

{ | |

int n; /* number of remaing symbols for this node */ | |

int left; /* number of unused bit patterns at this length */ | |

size_t index; /* index of this case in *num */ | |

/* clear code */ | |

for (n = 0; n <= max; n++) | |

code[n] = 0; | |

/* look at all (root + 1) bit and longer codes */ | |

large = 1 << root; /* base table */ | |

if (root < max) /* otherwise, there's only a base table */ | |

for (n = 3; n <= syms; n++) | |

for (left = 2; left < n; left += 2) | |

{ | |

/* look at all reachable (root + 1) bit nodes, and the | |

resulting codes (complete at root + 2 or more) */ | |

index = INDEX(n, left, root + 1); | |

if (root + 1 < max && num[index]) /* reachable node */ | |

examine(n, root + 1, left, 1 << root, 0); | |

/* also look at root bit codes with completions at root + 1 | |

bits (not saved in num, since complete), just in case */ | |

if (num[index - 1] && n <= left << 1) | |

examine((n - left) << 1, root + 1, (n - left) << 1, | |

1 << root, 0); | |

} | |

/* done */ | |

printf("done: maximum of %d table entries\n", large); | |

} | |

/* | |

Examine and show the total number of possible Huffman codes for a given | |

maximum number of symbols, initial root table size, and maximum code length | |

in bits -- those are the command arguments in that order. The default | |

values are 286, 9, and 15 respectively, for the deflate literal/length code. | |

The possible codes are counted for each number of coded symbols from two to | |

the maximum. The counts for each of those and the total number of codes are | |

shown. The maximum number of inflate table entires is then calculated | |

across all possible codes. Each new maximum number of table entries and the | |

associated sub-code (starting at root + 1 == 10 bits) is shown. | |

To count and examine Huffman codes that are not length-limited, provide a | |

maximum length equal to the number of symbols minus one. | |

For the deflate literal/length code, use "enough". For the deflate distance | |

code, use "enough 30 6". | |

This uses the %llu printf format to print big_t numbers, which assumes that | |

big_t is an unsigned long long. If the big_t type is changed (for example | |

to a multiple precision type), the method of printing will also need to be | |

updated. | |

*/ | |

int main(int argc, char **argv) | |

{ | |

int syms; /* total number of symbols to code */ | |

int n; /* number of symbols to code for this run */ | |

big_t got; /* return value of count() */ | |

big_t sum; /* accumulated number of codes over n */ | |

/* set up globals for cleanup() */ | |

code = NULL; | |

num = NULL; | |

done = NULL; | |

/* get arguments -- default to the deflate literal/length code */ | |

syms = 286; | |

root = 9; | |

max = 15; | |

if (argc > 1) { | |

syms = atoi(argv[1]); | |

if (argc > 2) { | |

root = atoi(argv[2]); | |

if (argc > 3) | |

max = atoi(argv[3]); | |

} | |

} | |

if (argc > 4 || syms < 2 || root < 1 || max < 1) { | |

fputs("invalid arguments, need: [sym >= 2 [root >= 1 [max >= 1]]]\n", | |

stderr); | |

return 1; | |

} | |

/* if not restricting the code length, the longest is syms - 1 */ | |

if (max > syms - 1) | |

max = syms - 1; | |

/* determine the number of bits in a code_t */ | |

n = 0; | |

while (((code_t)1 << n) != 0) | |

n++; | |

/* make sure that the calculation of most will not overflow */ | |

if (max > n || syms - 2 >= (((code_t)0 - 1) >> (max - 1))) { | |

fputs("abort: code length too long for internal types\n", stderr); | |

return 1; | |

} | |

/* reject impossible code requests */ | |

if (syms - 1 > ((code_t)1 << max) - 1) { | |

fprintf(stderr, "%d symbols cannot be coded in %d bits\n", | |

syms, max); | |

return 1; | |

} | |

/* allocate code vector */ | |

code = calloc(max + 1, sizeof(int)); | |

if (code == NULL) { | |

fputs("abort: unable to allocate enough memory\n", stderr); | |

return 1; | |

} | |

/* determine size of saved results array, checking for overflows, | |

allocate and clear the array (set all to zero with calloc()) */ | |

if (syms == 2) /* iff max == 1 */ | |

num = NULL; /* won't be saving any results */ | |

else { | |

size = syms >> 1; | |

if (size > ((size_t)0 - 1) / (n = (syms - 1) >> 1) || | |

(size *= n, size > ((size_t)0 - 1) / (n = max - 1)) || | |

(size *= n, size > ((size_t)0 - 1) / sizeof(big_t)) || | |

(num = calloc(size, sizeof(big_t))) == NULL) { | |

fputs("abort: unable to allocate enough memory\n", stderr); | |

cleanup(); | |

return 1; | |

} | |

} | |

/* count possible codes for all numbers of symbols, add up counts */ | |

sum = 0; | |

for (n = 2; n <= syms; n++) { | |

got = count(n, 1, 2); | |

sum += got; | |

if (got == -1 || sum < got) { /* overflow */ | |

fputs("abort: can't count that high!\n", stderr); | |

cleanup(); | |

return 1; | |

} | |

printf("%llu %d-codes\n", got, n); | |

} | |

printf("%llu total codes for 2 to %d symbols", sum, syms); | |

if (max < syms - 1) | |

printf(" (%d-bit length limit)\n", max); | |

else | |

puts(" (no length limit)"); | |

/* allocate and clear done array for beenhere() */ | |

if (syms == 2) | |

done = NULL; | |

else if (size > ((size_t)0 - 1) / sizeof(struct tab) || | |

(done = calloc(size, sizeof(struct tab))) == NULL) { | |

fputs("abort: unable to allocate enough memory\n", stderr); | |

cleanup(); | |

return 1; | |

} | |

/* find and show maximum inflate table usage */ | |

if (root > max) /* reduce root to max length */ | |

root = max; | |

if (syms < ((code_t)1 << (root + 1))) | |

enough(syms); | |

else | |

puts("cannot handle minimum code lengths > root"); | |

/* done */ | |

cleanup(); | |

return 0; | |

} |