| # This is Brooklyn's .properties file. |
| # It should be located at "~/.brooklyn/brooklyn.properties" |
| |
| ################################## Welcome! ############################################ |
| |
| # It's great to have you here. |
| |
| # Getting Started options have been pulled to the top. They are repeated further down. |
| # When you are happy with what Brooklyn does, and how to use it, you can delete this |
| # Getting Started Section completely, and use the full options below to setup your |
| # configuration. |
| |
| # (There's a formatting guide at the very bottom.) |
| |
| ############################ Getting Started Options #################################### |
| |
| # By default we have AWS and Rackspace (non-UK) set up. |
| # For each of those, either set the credentials immediately below |
| # or remove the corresponding lines far below (look for brooklyn.location.named...=...<aws>.. or =...<cloudservers>... ) |
| |
| # For other clouds, ADD corresponding identity and credential lines and enable the setup far below |
| |
| ## Amazon EC2 Credentials |
| |
| brooklyn.jclouds.aws-ec2.identity = YOURAPIKEY |
| brooklyn.jclouds.aws-ec2.credential = YOURSECRETKEY |
| |
| ## Rackspace Credentials |
| |
| brooklyn.jclouds.rackspace-cloudservers-us.identity = YOURAPIKEY |
| brooklyn.jclouds.rackspace-cloudservers-us.credential = YOURSECRETKEY |
| # For UK you need a *different* account, at rackspace.co.uk account (disabled by default) |
| #brooklyn.jclouds.rackspace-cloudservers-uk.identity = YOURAPIKEY |
| #brooklyn.jclouds.rackspace-cloudservers-uk.credential = YOURSECRETKEY |
| |
| ## Geoscaling Service (Used for global web fabric demo) https://www.geoscaling.com/dns2/ |
| brooklyn.geoscaling.username = USERNAME |
| brooklyn.geoscaling.password = PASSWORD |
| brooklyn.geoscaling.primaryDomain = DOMAIN |
| |
| # Beware of trailing spaces in your cloud credentials. This will cause unexpected |
| # 401: unauthorized responses. |
| |
| # That's it. Getting started Finished! |
| |
| ################################ Brooklyn Options ######################################## |
| |
| ## SSH key for localhost |
| # (~/.ssh/id_rsa is Brooklyn's default location.) Passphrases are optional. |
| # brooklyn.localhost.private-key-file = ~/.ssh/id_rsa |
| # brooklyn.localhost.private-key-passphrase = s3cr3tpassphrase |
| |
| ## GUI Security |
| # brooklyn.webconsole.security.https.required=true |
| # brooklyn.webconsole.security.users=admin,bob |
| # brooklyn.webconsole.security.user.admin.password=password |
| # brooklyn.webconsole.security.user.bob.password=bobsword |
| |
| ## GUI Security: Allow all. |
| # brooklyn.webconsole.security.provider = brooklyn.rest.security.provider.AnyoneSecurityProvider |
| |
| #################################### Locations ########################################### |
| |
| # Named locations appear in the web console. If using the command line, it may be as easy |
| # to use the jclouds:<provider> locations. |
| |
| ## Example: AWS Virginia using Rightscale 6.3 64bit Centos AMI and Large Instances |
| # brooklyn.location.named.AWS\ Virginia\ Large\ Centos = jclouds:aws-ec2:us-east-1 |
| # brooklyn.location.named.AWS\ Virginia\ Large\ Centos.imageId=us-east-1/ami-7d7bfc14 |
| # brooklyn.location.named.AWS\ Virginia\ Large\ Centos.user=root |
| # brooklyn.location.named.AWS\ Virginia\ Large\ Centos.minRam=4096 |
| |
| ## Example: Rackspace US using Debian |
| # brooklyn.location.named.Rackspace\ US\ -\ Debian = jclouds:cloudservers-us |
| # brooklyn.location.named.Rackspace\ US\ -\ Debian.image-name-regex = Debian |
| |
| ## Example: AWS Oregon with Meta Data |
| # brooklyn.location.named.AWS\ EC2\ Oregon = jclouds:aws-ec2:us-west-2 |
| # brooklyn.location.named.AWS\ EC2\ Oregon.userMetadata = application=my-oregon-app,owner="Awesome Brooklyn User" |
| |
| ## Example: AWS Ireland using Alternative Keys |
| # brooklyn.location.named.AWS\ EC2\ Ireland\ Alt \Keys = jclouds:aws-ec2:eu-west-1 |
| # brooklyn.location.named.AWS\ EC2\ Ireland.private-key-file = ~/.ssh/alternative_rsa |
| # brooklyn.location.named.AWS\ EC2\ Ireland.public-key-file = ~/.ssh/alternative_rsa.pub |
| |
| |
| ## List of jclouds Compute Locations |
| ## jclouds is a multi-cloud library that Brooklyn uses to access many clouds. |
| ## Supported clouds: http://www.jclouds.org/documentation/reference/supported-providers/ |
| ## |
| ## Comment out those that you don't need. |
| ## Remember to define your identity and credential for each provider |
| ## e.g: brooklyn.jclouds.aws-ec2.identity = ? |
| ## brooklyn.jclouds.aws-ec2.credential = ? |
| ## brooklyn.jclouds.cloudservers-us.identity = ? |
| ## brooklyn.jclouds.cloudservers-us.credential = ? |
| ## |
| |
| # Note: For the convenience of new users, we have specified Ubuntu 12.04 LTS AMIs within |
| # AWS, deploying to m1.smalls, minimum. Ubuntu requires user = ubuntu. |
| # Please change these to better suit your requirements. |
| # (Note: If no parameters are set jclouds will pick AMIs at random, user=root, t1.micros.) |
| #brooklyn.jclouds.aws-ec2.identity = YOURAPIKEY |
| #brooklyn.jclouds.aws-ec2.credential = YOURSECRETKEY |
| brooklyn.jclouds.aws-ec2.minRam = 1600 |
| brooklyn.jclouds.aws-ec2.user=brooklyn |
| brooklyn.location.named.AWS\ Virginia\ (us-east-1) = jclouds:aws-ec2:us-east-1 |
| brooklyn.location.named.AWS\ Virginia\ (us-east-1).imageId = us-east-1/ami-d0f89fb9 |
| brooklyn.location.named.AWS\ Virginia\ (us-east-1).user = ubuntu |
| brooklyn.location.named.AWS\ Oregon\ (us-west-2) = jclouds:aws-ec2:us-west-2 |
| brooklyn.location.named.AWS\ Oregon\ (us-west-2).imageId = us-west-2/ami-70f96e40 |
| brooklyn.location.named.AWS\ Oregon\ (us-west-2).user = ubuntu |
| brooklyn.location.named.AWS\ California\ (us-west-1) = jclouds:aws-ec2:us-west-1 |
| brooklyn.location.named.AWS\ California\ (us-west-1).imageId = us-west-1/ami-fe002cbb |
| brooklyn.location.named.AWS\ California\ (us-west-1).user = ubuntu |
| brooklyn.location.named.AWS\ Ireland\ (eu-west-1) = jclouds:aws-ec2:eu-west-1 |
| brooklyn.location.named.AWS\ Ireland\ (eu-west-1).imageId = eu-west-1/ami-ce7b6fba |
| brooklyn.location.named.AWS\ Ireland\ (eu-west-1).user = ubuntu |
| brooklyn.location.named.AWS\ Singapore\ (ap-southeast-1) = jclouds:aws-ec2:ap-southeast-1 |
| brooklyn.location.named.AWS\ Singapore\ (ap-southeast-1).imageId = ap-southeast-1/ami-64084736 |
| brooklyn.location.named.AWS\ Singapore\ (ap-southeast-1).user = ubuntu |
| brooklyn.location.named.AWS\ Tokyo\ (ap-northeast-1) = jclouds:aws-ec2:ap-northeast-1 |
| brooklyn.location.named.AWS\ Tokyo\ (ap-northeast-1).imageId = ap-northeast-1/ami-fe6ceeff |
| brooklyn.location.named.AWS\ Tokyo\ (ap-northeast-1).user = ubuntu |
| brooklyn.location.named.AWS\ Sydney\ (ap-southeast-2) = jclouds:aws-ec2:ap-southeast-2 |
| brooklyn.location.named.AWS\ Sydney\ (ap-southeast-2).imageId = ap-southeast-2/ami-04ea7a3e |
| brooklyn.location.named.AWS\ Sydney\ (ap-southeast-2).user = ubuntu |
| brooklyn.location.named.AWS\ Sao\ Paulo\ (sa-east-1) = jclouds:aws-ec2:sa-east-1 |
| brooklyn.location.named.AWS\ Sao\ Paulo\ (sa-east-1).imageId = sa-east-1/ami-a3da00be |
| brooklyn.location.named.AWS\ Sao\ Paulo\ (sa-east-1).user = ubuntu |
| |
| # Similarly, here are definitions for HP Cloud - also Ubuntu 12.04 LTS |
| # You specify your HP Credentials like this: |
| # brooklyn.jclouds.hpcloud-compute.identity = projectname:username |
| # brooklyn.jclouds.hpcloud-compute.credential = password |
| # where username and password are the same as logging in to the web console, and |
| # projectname can be found here: https://account.hpcloud.com/projects |
| brooklyn.location.named.HP\ Cloud\ Arizona-1 = jclouds:hpcloud-compute:az-1.region-a.geo-1 |
| brooklyn.location.named.HP\ Cloud\ Arizona-1.imageId = az-1.region-a.geo-1/75845 |
| brooklyn.location.named.HP\ Cloud\ Arizona-1.user = ubuntu |
| brooklyn.location.named.HP\ Cloud\ Arizona-2 = jclouds:hpcloud-compute:az-2.region-a.geo-1 |
| brooklyn.location.named.HP\ Cloud\ Arizona-2.imageId = az-2.region-a.geo-1/67074 |
| brooklyn.location.named.HP\ Cloud\ Arizona-2.user = ubuntu |
| brooklyn.location.named.HP\ Cloud\ Arizona-3 = jclouds:hpcloud-compute:az-3.region-a.geo-1 |
| brooklyn.location.named.HP\ Cloud\ Arizona-3.imageId = az-3.region-a.geo-1/48335 |
| brooklyn.location.named.HP\ Cloud\ Arizona-3.user = ubuntu |
| |
| # brooklyn.location.named.Bluelock = jclouds:bluelock-vcloud-zone01 |
| |
| # brooklyn.location.named.CloudSigma\ Nevada = jclouds:cloudsigma-lvs |
| # brooklyn.location.named.CloudSigma\ Zurich = jclouds:cloudsigma-zrh |
| |
| # brooklyn.location.named.ElasticHosts\ London = jclouds:elastichosts-lon-p |
| # brooklyn.location.named.ElasticHosts\ Texas = jclouds:elastichosts-sat-p |
| |
| # brooklyn.location.named.GleSYS = jclouds:glesys |
| |
| # brooklyn.location.named.Go2Cloud = jclouds:go2cloud-jhb1 |
| |
| # brooklyn.location.named.GoGrid = jclouds:gogrid |
| |
| ## Google Compute: at present you have to create and download the P12 key from the Google "APIs & auth -> Registered Apps" interface, |
| ## then convert to PEM private key format using `openssl pkcs12 -in Certificates.p12 -out Certificates.pem -nodes` |
| ## then embed that on one line as the 'credential, replacing new lines with \n as below |
| ## (hopefully this will be improved in jclouds in the future) |
| # brooklyn.location.jclouds.google-compute-engine.identity=1234567890-somet1mesArand0mU1Dhere@developer.gserviceaccount.com |
| # brooklyn.location.jclouds.google-compute-engine.credential=-----BEGIN PRIVATE KEY----- \nMIIblahablahblah \nblahblahblah \n-----END PRIVATE KEY----- |
| # brooklyn.location.named.Google\ US = jclouds:google-compute-engine |
| # brooklyn.location.named.Google\ US.region=us-central1-a |
| # brooklyn.location.named.Google\ EU = jclouds:google-compute-engine |
| # brooklyn.location.named.Google\ EU.region=europe-west1-a |
| ## the following flags for GCE are recommended |
| ## groupId makes it used a fixed network - otherwise it creates new networks (security groups) each time and you hit quotas pretty quickly |
| ## you have to manually create this network AND enable a firewall rule EG tcp:1-65535;udp:1-65535;icmp:-1 |
| ## (fix for this is in progress) |
| # brooklyn.location.jclouds.google-compute-engine.groupId=brooklyn-gce-default-group |
| ## imageId hard-coded prevents jclouds from auto-detected _deprecated_ images (fix for this in progress) |
| # brooklyn.location.jclouds.google-compute-engine.imageId=gcel-12-04-v20130104 |
| ## gce images have bad entropy, this ensures they have noisy /dev/random (even if the "randomness" is not quite as random) |
| # brooklyn.location.jclouds.google-compute-engine.installDevUrandom=true |
| |
| # brooklyn.location.named.Green\ House\ Data = jclouds:greenhousedata-element-vcloud |
| |
| # brooklyn.location.named.Ninefold = jclouds:ninefold-compute |
| |
| # brooklyn.location.named.OpenHosting = jclouds:openhosting-east1 |
| |
| brooklyn.location.named.Rackspace\ US-TX\ DFW = jclouds:rackspace-cloudservers-us:DFW |
| brooklyn.location.named.Rackspace\ US-VA\ IAD = jclouds:rackspace-cloudservers-us:IAD |
| brooklyn.location.named.Rackspace\ US-IL\ ORD = jclouds:rackspace-cloudservers-us:ORD |
| brooklyn.location.named.Rackspace\ HKG = jclouds:rackspace-cloudservers-us:HKG |
| brooklyn.location.named.Rackspace\ SYD = jclouds:rackspace-cloudservers-us:SYD |
| # for UK you will need a separate account with rackspace.co.uk |
| # brooklyn.location.named.Rackspace\ UK = jclouds:rackspace-cloudservers-uk |
| |
| ## if you need to use Rackspace "first gen" API |
| ## (note the "next gen" api configured above seems to be faster) |
| # brooklyn.jclouds.cloudservers-us.identity = YOURAPIKEY |
| # brooklyn.jclouds.cloudservers-us.credential = YOURSECRETKEY |
| # brooklyn.location.named.Rackspace\ US\ (First Gen) = jclouds:cloudservers-us |
| ## and as with next gen, first gen requires a separate acct for the UK: |
| # brooklyn.jclouds.cloudservers-uk.identity = YOURAPIKEY |
| # brooklyn.jclouds.cloudservers-uk.credential = YOURSECRETKEY |
| # brooklyn.location.named.Rackspace\ UK\ (First Gen) = jclouds:cloudservers-uk |
| |
| # brooklyn.location.named.SeverLove = jclouds:serverlove-z1-man |
| |
| # brooklyn.location.named.SkaliCloud = jclouds:skalicloud-sdg-my |
| |
| # brooklyn.location.named.SoftLayer = jclouds:softlayer |
| |
| # brooklyn.location.named.Stratogen = jclouds:stratogen-vcloud-mycloud |
| |
| # brooklyn.location.named.TryStack\ (Openstack) = jclouds:trystack-nova |
| |
| |
| ## Production pool of machines for my application (deploy to named:On-Prem\ Iron\ Example) |
| #brooklyn.location.named.On-Prem\ Iron\ Example=byon:(hosts="10.9.1.1,10.9.1.2,produser2@10.9.2.{10,11,20-29}") |
| #brooklyn.location.named.On-Prem\ Iron\ Example.user=produser1 |
| #brooklyn.location.named.On-Prem\ Iron\ Example.privateKeyFile=~/.ssh/produser_id_rsa |
| #brooklyn.location.named.On-Prem\ Iron\ Example.privateKeyPassphrase=s3cr3tpassphrase |
| |
| ## Various private clouds |
| ## openstack identity and credential are random strings of letters and numbers (TBC - still the case?) |
| #brooklyn.location.named.My\ Openstack=jclouds:openstack-nova:https://9.9.9.9:9999/v2.0/ |
| ## cloudstack identity and credential are rather long random strings of letters and numbers |
| #brooklyn.location.named.My\ Cloudstack=jclouds:cloudstack:http://9.9.9.9:9999/client/api/ |
| ## abiquo identity and credential are your login username/passed |
| #brooklyn.location.named.My\ Abiquo=jclouds:abiquo:http://demonstration.abiquo.com/api/ |
| |
| ############################### Formatting Guide ####################################### |
| |
| ! Both # and ! mark lines as comments |
| # The follow syntax are ALL valid. |
| # example_key example_value |
| # example_key : example_value |
| # example_key = example_value |
| # example_key=example_value |
| |
| # The backslash below tells Brooklyn to continue reading the value onto the next line. |
| # example_key = A very \ |
| # long string! |
| # Note all white space before 'long...' is ignored. Also '!' is kept as part of the string |
| |
| |
| # Keys with spaces should be escaped with backslashes. |
| # This is useful for named locations, as the name displayed in Brooklyn's web |
| # interface is derived from the key name. |
| # key\ with\ spaces = some\ value |
| |
| # Encoding for .properties must be ISO-8859-1, aka Latin-1. |
| # All non-latin1 characters must be entered using unicode escape characters |
| # polish_pangram = P\u00F3jd\u017A\u017Ce, ki\u0144 \ |
| # t\u0119 chmurno\u015B\u0107 w g\u0142\u0105b flaszy! |