| // Licensed to the Apache Software Foundation (ASF) under one |
| // or more contributor license agreements. See the NOTICE file |
| // distributed with this work for additional information |
| // regarding copyright ownership. The ASF licenses this file |
| // to you under the Apache License, Version 2.0 (the |
| // "License"); you may not use this file except in compliance |
| // with the License. You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, |
| // software distributed under the License is distributed on an |
| // "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| // KIND, either express or implied. See the License for the |
| // specific language governing permissions and limitations |
| // under the License. |
| |
| #include <boost/bind.hpp> |
| #include <boost/filesystem.hpp> |
| #include <boost/scoped_ptr.hpp> |
| |
| #include <limits> // for std::numeric_limits<int>::max() |
| #include <set> |
| #include <string> |
| |
| #include "codegen/llvm-codegen.h" |
| #include "gutil/gscoped_ptr.h" |
| #include "runtime/buffered-tuple-stream-v2.inline.h" |
| #include "runtime/query-state.h" |
| #include "runtime/bufferpool/reservation-tracker.h" |
| #include "runtime/collection-value-builder.h" |
| #include "runtime/collection-value.h" |
| #include "runtime/raw-value.h" |
| #include "runtime/row-batch.h" |
| #include "runtime/string-value.inline.h" |
| #include "runtime/test-env.h" |
| #include "runtime/tmp-file-mgr.h" |
| #include "service/fe-support.h" |
| #include "testutil/desc-tbl-builder.h" |
| #include "testutil/gtest-util.h" |
| #include "util/test-info.h" |
| |
| #include "gen-cpp/ImpalaInternalService_types.h" |
| #include "gen-cpp/Types_types.h" |
| |
| #include "common/names.h" |
| |
| using kudu::FreeDeleter; |
| using std::numeric_limits; |
| |
| static const int BATCH_SIZE = 250; |
| // Allow arbitrarily small pages in our test buffer pool. |
| static const int MIN_PAGE_LEN = 1; |
| // Limit the size of the buffer pool to bound memory consumption. |
| static const int64_t BUFFER_POOL_LIMIT = 1024L * 1024L * 1024L; |
| |
| // The page length to use for the streams. |
| static const int PAGE_LEN = 2 * 1024 * 1024; |
| static const uint32_t PRIME = 479001599; |
| |
| namespace impala { |
| |
| static const StringValue STRINGS[] = { |
| StringValue("ABC"), StringValue("HELLO"), StringValue("123456789"), |
| StringValue("FOOBAR"), StringValue("ONE"), StringValue("THREE"), |
| StringValue("abcdefghijklmno"), StringValue("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"), |
| StringValue("bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"), |
| }; |
| |
| static const int NUM_STRINGS = sizeof(STRINGS) / sizeof(StringValue); |
| |
| class SimpleTupleStreamTest : public testing::Test { |
| protected: |
| virtual void SetUp() {} |
| |
| virtual void CreateDescriptors() { |
| vector<bool> nullable_tuples(1, false); |
| vector<TTupleId> tuple_ids(1, static_cast<TTupleId>(0)); |
| |
| DescriptorTblBuilder int_builder(test_env_->exec_env()->frontend(), &pool_); |
| int_builder.DeclareTuple() << TYPE_INT; |
| int_desc_ = |
| pool_.Add(new RowDescriptor(*int_builder.Build(), tuple_ids, nullable_tuples)); |
| |
| DescriptorTblBuilder string_builder(test_env_->exec_env()->frontend(), &pool_); |
| string_builder.DeclareTuple() << TYPE_STRING; |
| string_desc_ = |
| pool_.Add(new RowDescriptor(*string_builder.Build(), tuple_ids, nullable_tuples)); |
| } |
| |
| virtual void TearDown() { |
| if (client_.is_registered()) { |
| test_env_->exec_env()->buffer_pool()->DeregisterClient(&client_); |
| } |
| runtime_state_ = nullptr; |
| pool_.Clear(); |
| mem_pool_->FreeAll(); |
| test_env_.reset(); |
| } |
| |
| /// Set up all of the test state: the buffer pool, a query state, a client with no |
| /// reservation and any other descriptors, etc. |
| /// The buffer pool's capacity is limited to 'buffer_pool_limit'. |
| void Init(int64_t buffer_pool_limit) { |
| test_env_.reset(new TestEnv()); |
| test_env_->SetBufferPoolArgs(MIN_PAGE_LEN, buffer_pool_limit); |
| ASSERT_OK(test_env_->Init()); |
| |
| CreateDescriptors(); |
| mem_pool_.reset(new MemPool(&tracker_)); |
| |
| ASSERT_OK(test_env_->CreateQueryState(0, nullptr, &runtime_state_)); |
| query_state_ = runtime_state_->query_state(); |
| |
| RuntimeProfile* client_profile = pool_.Add(new RuntimeProfile(&pool_, "client")); |
| MemTracker* client_tracker = |
| pool_.Add(new MemTracker(-1, "client", runtime_state_->instance_mem_tracker())); |
| ASSERT_OK(test_env_->exec_env()->buffer_pool()->RegisterClient("", |
| query_state_->file_group(), runtime_state_->instance_buffer_reservation(), |
| client_tracker, numeric_limits<int>::max(), client_profile, &client_)); |
| } |
| |
| /// Generate the ith element of a sequence of int values. |
| int GenIntValue(int i) { |
| // Multiply by large prime to get varied bit patterns. |
| return i * PRIME; |
| } |
| |
| /// Generate the ith element of a sequence of bool values. |
| bool GenBoolValue(int i) { |
| // Use a middle bit of the int value. |
| return ((GenIntValue(i) >> 8) & 0x1) != 0; |
| } |
| |
| /// Count the total number of slots per row based on the given row descriptor. |
| int CountSlotsPerRow(const RowDescriptor& row_desc) { |
| int slots_per_row = 0; |
| for (int i = 0; i < row_desc.tuple_descriptors().size(); ++i) { |
| TupleDescriptor* tuple_desc = row_desc.tuple_descriptors()[i]; |
| slots_per_row += tuple_desc->slots().size(); |
| } |
| return slots_per_row; |
| } |
| |
| /// Allocate a row batch with 'num_rows' of rows with layout described by 'row_desc'. |
| /// 'offset' is used to account for rows occupied by any previous row batches. This is |
| /// needed to match the values generated in VerifyResults(). If 'gen_null' is true, |
| /// some tuples will be set to NULL. |
| virtual RowBatch* CreateBatch( |
| const RowDescriptor& row_desc, int offset, int num_rows, bool gen_null) { |
| RowBatch* batch = pool_.Add(new RowBatch(row_desc, num_rows, &tracker_)); |
| int num_tuples = row_desc.tuple_descriptors().size(); |
| |
| int idx = offset * CountSlotsPerRow(row_desc); |
| for (int row_idx = 0; row_idx < num_rows; ++row_idx) { |
| TupleRow* row = batch->GetRow(row_idx); |
| for (int tuple_idx = 0; tuple_idx < num_tuples; ++tuple_idx) { |
| TupleDescriptor* tuple_desc = row_desc.tuple_descriptors()[tuple_idx]; |
| Tuple* tuple = Tuple::Create(tuple_desc->byte_size(), batch->tuple_data_pool()); |
| bool is_null = gen_null && !GenBoolValue(idx); |
| for (int slot_idx = 0; slot_idx < tuple_desc->slots().size(); ++slot_idx, ++idx) { |
| SlotDescriptor* slot_desc = tuple_desc->slots()[slot_idx]; |
| void* slot = tuple->GetSlot(slot_desc->tuple_offset()); |
| switch (slot_desc->type().type) { |
| case TYPE_INT: |
| *reinterpret_cast<int*>(slot) = GenIntValue(idx); |
| break; |
| case TYPE_STRING: |
| *reinterpret_cast<StringValue*>(slot) = STRINGS[idx % NUM_STRINGS]; |
| break; |
| default: |
| // The memory has been zero'ed out already by Tuple::Create(). |
| break; |
| } |
| } |
| if (is_null) { |
| row->SetTuple(tuple_idx, nullptr); |
| } else { |
| row->SetTuple(tuple_idx, tuple); |
| } |
| } |
| batch->CommitLastRow(); |
| } |
| return batch; |
| } |
| |
| virtual RowBatch* CreateIntBatch(int offset, int num_rows, bool gen_null) { |
| return CreateBatch(*int_desc_, offset, num_rows, gen_null); |
| } |
| |
| virtual RowBatch* CreateStringBatch(int offset, int num_rows, bool gen_null) { |
| return CreateBatch(*string_desc_, offset, num_rows, gen_null); |
| } |
| |
| void AppendValue(uint8_t* ptr, vector<int>* results) { |
| if (ptr == nullptr) { |
| // For the tests indicate null-ability using the max int value |
| results->push_back(numeric_limits<int>::max()); |
| } else { |
| results->push_back(*reinterpret_cast<int*>(ptr)); |
| } |
| } |
| |
| void AppendValue(uint8_t* ptr, vector<StringValue>* results) { |
| if (ptr == nullptr) { |
| results->push_back(StringValue()); |
| } else { |
| StringValue sv = *reinterpret_cast<StringValue*>(ptr); |
| uint8_t* copy = mem_pool_->Allocate(sv.len); |
| memcpy(copy, sv.ptr, sv.len); |
| sv.ptr = reinterpret_cast<char*>(copy); |
| results->push_back(sv); |
| } |
| } |
| |
| template <typename T> |
| void AppendRowTuples(TupleRow* row, RowDescriptor* row_desc, vector<T>* results) { |
| DCHECK(row != nullptr); |
| const int num_tuples = row_desc->tuple_descriptors().size(); |
| |
| for (int tuple_idx = 0; tuple_idx < num_tuples; ++tuple_idx) { |
| TupleDescriptor* tuple_desc = row_desc->tuple_descriptors()[tuple_idx]; |
| Tuple* tuple = row->GetTuple(tuple_idx); |
| const int num_slots = tuple_desc->slots().size(); |
| for (int slot_idx = 0; slot_idx < num_slots; ++slot_idx) { |
| SlotDescriptor* slot_desc = tuple_desc->slots()[slot_idx]; |
| if (tuple == nullptr) { |
| AppendValue(nullptr, results); |
| } else { |
| void* slot = tuple->GetSlot(slot_desc->tuple_offset()); |
| AppendValue(reinterpret_cast<uint8_t*>(slot), results); |
| } |
| } |
| } |
| } |
| |
| template <typename T> |
| void ReadValues(BufferedTupleStreamV2* stream, RowDescriptor* desc, vector<T>* results, |
| int num_batches = -1) { |
| bool eos = false; |
| RowBatch batch(*desc, BATCH_SIZE, &tracker_); |
| int batches_read = 0; |
| do { |
| batch.Reset(); |
| EXPECT_OK(stream->GetNext(&batch, &eos)); |
| ++batches_read; |
| for (int i = 0; i < batch.num_rows(); ++i) { |
| AppendRowTuples(batch.GetRow(i), desc, results); |
| } |
| } while (!eos && (num_batches < 0 || batches_read <= num_batches)); |
| } |
| |
| void GetExpectedValue(int idx, bool is_null, int* val) { |
| if (is_null) { |
| *val = numeric_limits<int>::max(); |
| } else { |
| *val = GenIntValue(idx); |
| } |
| } |
| |
| void GetExpectedValue(int idx, bool is_null, StringValue* val) { |
| if (is_null) { |
| *val = StringValue(); |
| } else { |
| *val = STRINGS[idx % NUM_STRINGS]; |
| } |
| } |
| |
| template <typename T> |
| void VerifyResults(const RowDescriptor& row_desc, const vector<T>& results, |
| int num_rows, bool gen_null) { |
| int idx = 0; |
| for (int row_idx = 0; row_idx < num_rows; ++row_idx) { |
| const int num_tuples = row_desc.tuple_descriptors().size(); |
| for (int tuple_idx = 0; tuple_idx < num_tuples; ++tuple_idx) { |
| const TupleDescriptor* tuple_desc = row_desc.tuple_descriptors()[tuple_idx]; |
| const int num_slots = tuple_desc->slots().size(); |
| bool is_null = gen_null && !GenBoolValue(idx); |
| for (int slot_idx = 0; slot_idx < num_slots; ++slot_idx, ++idx) { |
| T expected_val; |
| GetExpectedValue(idx, is_null, &expected_val); |
| ASSERT_EQ(results[idx], expected_val) |
| << "results[" << idx << "] " << results[idx] << " != " << expected_val |
| << " row_idx=" << row_idx << " tuple_idx=" << tuple_idx |
| << " slot_idx=" << slot_idx << " gen_null=" << gen_null; |
| } |
| } |
| } |
| DCHECK_EQ(results.size(), idx); |
| } |
| |
| // Test adding num_batches of ints to the stream and reading them back. |
| // If unpin_stream is true, operate the stream in unpinned mode. |
| // Assumes that enough buffers are available to read and write the stream. |
| template <typename T> |
| void TestValues(int num_batches, RowDescriptor* desc, bool gen_null, bool unpin_stream, |
| int64_t page_len = PAGE_LEN, int num_rows = BATCH_SIZE) { |
| BufferedTupleStreamV2 stream(runtime_state_, *desc, &client_, page_len); |
| ASSERT_OK(stream.Init(-1, true)); |
| bool got_write_reservation; |
| ASSERT_OK(stream.PrepareForWrite(&got_write_reservation)); |
| ASSERT_TRUE(got_write_reservation); |
| |
| if (unpin_stream) { |
| stream.UnpinStream(BufferedTupleStreamV2::UNPIN_ALL_EXCEPT_CURRENT); |
| } |
| // Add rows to the stream |
| int offset = 0; |
| for (int i = 0; i < num_batches; ++i) { |
| RowBatch* batch = nullptr; |
| |
| Status status; |
| ASSERT_TRUE(sizeof(T) == sizeof(int) || sizeof(T) == sizeof(StringValue)); |
| batch = CreateBatch(*desc, offset, num_rows, gen_null); |
| for (int j = 0; j < batch->num_rows(); ++j) { |
| // TODO: test that AddRow succeeds after freeing memory. |
| bool b = stream.AddRow(batch->GetRow(j), &status); |
| ASSERT_OK(status); |
| ASSERT_TRUE(b); |
| } |
| offset += batch->num_rows(); |
| // Reset the batch to make sure the stream handles the memory correctly. |
| batch->Reset(); |
| } |
| |
| bool got_read_reservation; |
| ASSERT_OK(stream.PrepareForRead(false, &got_read_reservation)); |
| ASSERT_TRUE(got_read_reservation); |
| |
| // Read all the rows back |
| vector<T> results; |
| ReadValues(&stream, desc, &results); |
| |
| // Verify result |
| VerifyResults<T>(*desc, results, num_rows * num_batches, gen_null); |
| |
| stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| } |
| |
| void TestIntValuesInterleaved(int num_batches, int num_batches_before_read, |
| bool unpin_stream, int64_t page_len = PAGE_LEN) { |
| BufferedTupleStreamV2 stream(runtime_state_, *int_desc_, &client_, page_len); |
| ASSERT_OK(stream.Init(-1, true)); |
| bool got_reservation; |
| ASSERT_OK(stream.PrepareForReadWrite(true, &got_reservation)); |
| ASSERT_TRUE(got_reservation); |
| if (unpin_stream) { |
| stream.UnpinStream(BufferedTupleStreamV2::UNPIN_ALL_EXCEPT_CURRENT); |
| } |
| |
| vector<int> results; |
| for (int i = 0; i < num_batches; ++i) { |
| RowBatch* batch = CreateIntBatch(i * BATCH_SIZE, BATCH_SIZE, false); |
| for (int j = 0; j < batch->num_rows(); ++j) { |
| Status status; |
| bool b = stream.AddRow(batch->GetRow(j), &status); |
| ASSERT_TRUE(b); |
| ASSERT_OK(status); |
| } |
| // Reset the batch to make sure the stream handles the memory correctly. |
| batch->Reset(); |
| if (i % num_batches_before_read == 0) { |
| ReadValues(&stream, int_desc_, &results, (rand() % num_batches_before_read) + 1); |
| } |
| } |
| ReadValues(&stream, int_desc_, &results); |
| |
| VerifyResults<int>(*int_desc_, results, BATCH_SIZE * num_batches, false); |
| |
| stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| } |
| |
| void TestUnpinPin(bool varlen_data, bool read_write); |
| |
| void TestTransferMemory(bool pinned_stream, bool read_write); |
| |
| // The temporary runtime environment used for the test. |
| scoped_ptr<TestEnv> test_env_; |
| RuntimeState* runtime_state_; |
| QueryState* query_state_; |
| |
| // Buffer pool client - automatically deregistered in TearDown(). |
| BufferPool::ClientHandle client_; |
| |
| // Dummy MemTracker used for miscellaneous memory. |
| MemTracker tracker_; |
| ObjectPool pool_; |
| RowDescriptor* int_desc_; |
| RowDescriptor* string_desc_; |
| scoped_ptr<MemPool> mem_pool_; |
| }; |
| |
| // Tests with a non-NULLable tuple per row. |
| class SimpleNullStreamTest : public SimpleTupleStreamTest { |
| protected: |
| virtual void CreateDescriptors() { |
| vector<bool> nullable_tuples(1, true); |
| vector<TTupleId> tuple_ids(1, static_cast<TTupleId>(0)); |
| |
| DescriptorTblBuilder int_builder(test_env_->exec_env()->frontend(), &pool_); |
| int_builder.DeclareTuple() << TYPE_INT; |
| int_desc_ = |
| pool_.Add(new RowDescriptor(*int_builder.Build(), tuple_ids, nullable_tuples)); |
| |
| DescriptorTblBuilder string_builder(test_env_->exec_env()->frontend(), &pool_); |
| string_builder.DeclareTuple() << TYPE_STRING; |
| string_desc_ = |
| pool_.Add(new RowDescriptor(*string_builder.Build(), tuple_ids, nullable_tuples)); |
| } |
| }; // SimpleNullStreamTest |
| |
| // Tests with multiple non-NULLable tuples per row. |
| class MultiTupleStreamTest : public SimpleTupleStreamTest { |
| protected: |
| virtual void CreateDescriptors() { |
| vector<bool> nullable_tuples; |
| nullable_tuples.push_back(false); |
| nullable_tuples.push_back(false); |
| nullable_tuples.push_back(false); |
| |
| vector<TTupleId> tuple_ids; |
| tuple_ids.push_back(static_cast<TTupleId>(0)); |
| tuple_ids.push_back(static_cast<TTupleId>(1)); |
| tuple_ids.push_back(static_cast<TTupleId>(2)); |
| |
| DescriptorTblBuilder int_builder(test_env_->exec_env()->frontend(), &pool_); |
| int_builder.DeclareTuple() << TYPE_INT; |
| int_builder.DeclareTuple() << TYPE_INT; |
| int_builder.DeclareTuple() << TYPE_INT; |
| int_desc_ = |
| pool_.Add(new RowDescriptor(*int_builder.Build(), tuple_ids, nullable_tuples)); |
| |
| DescriptorTblBuilder string_builder(test_env_->exec_env()->frontend(), &pool_); |
| string_builder.DeclareTuple() << TYPE_STRING; |
| string_builder.DeclareTuple() << TYPE_STRING; |
| string_builder.DeclareTuple() << TYPE_STRING; |
| string_desc_ = |
| pool_.Add(new RowDescriptor(*string_builder.Build(), tuple_ids, nullable_tuples)); |
| } |
| }; |
| |
| // Tests with multiple NULLable tuples per row. |
| class MultiNullableTupleStreamTest : public SimpleTupleStreamTest { |
| protected: |
| virtual void CreateDescriptors() { |
| vector<bool> nullable_tuples; |
| nullable_tuples.push_back(false); |
| nullable_tuples.push_back(true); |
| nullable_tuples.push_back(true); |
| |
| vector<TTupleId> tuple_ids; |
| tuple_ids.push_back(static_cast<TTupleId>(0)); |
| tuple_ids.push_back(static_cast<TTupleId>(1)); |
| tuple_ids.push_back(static_cast<TTupleId>(2)); |
| |
| DescriptorTblBuilder int_builder(test_env_->exec_env()->frontend(), &pool_); |
| int_builder.DeclareTuple() << TYPE_INT; |
| int_builder.DeclareTuple() << TYPE_INT; |
| int_builder.DeclareTuple() << TYPE_INT; |
| int_desc_ = |
| pool_.Add(new RowDescriptor(*int_builder.Build(), tuple_ids, nullable_tuples)); |
| |
| DescriptorTblBuilder string_builder(test_env_->exec_env()->frontend(), &pool_); |
| string_builder.DeclareTuple() << TYPE_STRING; |
| string_builder.DeclareTuple() << TYPE_STRING; |
| string_builder.DeclareTuple() << TYPE_STRING; |
| string_desc_ = |
| pool_.Add(new RowDescriptor(*string_builder.Build(), tuple_ids, nullable_tuples)); |
| } |
| }; |
| |
| /// Tests with collection types. |
| class ArrayTupleStreamTest : public SimpleTupleStreamTest { |
| protected: |
| RowDescriptor* array_desc_; |
| |
| virtual void CreateDescriptors() { |
| // tuples: (array<string>, array<array<int>>) (array<int>) |
| vector<bool> nullable_tuples(2, true); |
| vector<TTupleId> tuple_ids; |
| tuple_ids.push_back(static_cast<TTupleId>(0)); |
| tuple_ids.push_back(static_cast<TTupleId>(1)); |
| ColumnType string_array_type; |
| string_array_type.type = TYPE_ARRAY; |
| string_array_type.children.push_back(TYPE_STRING); |
| |
| ColumnType int_array_type; |
| int_array_type.type = TYPE_ARRAY; |
| int_array_type.children.push_back(TYPE_STRING); |
| |
| ColumnType nested_array_type; |
| nested_array_type.type = TYPE_ARRAY; |
| nested_array_type.children.push_back(int_array_type); |
| |
| DescriptorTblBuilder builder(test_env_->exec_env()->frontend(), &pool_); |
| builder.DeclareTuple() << string_array_type << nested_array_type; |
| builder.DeclareTuple() << int_array_type; |
| array_desc_ = |
| pool_.Add(new RowDescriptor(*builder.Build(), tuple_ids, nullable_tuples)); |
| } |
| }; |
| |
| // Basic API test. No data should be going to disk. |
| TEST_F(SimpleTupleStreamTest, Basic) { |
| Init(numeric_limits<int64_t>::max()); |
| TestValues<int>(1, int_desc_, false, true); |
| TestValues<int>(10, int_desc_, false, true); |
| TestValues<int>(100, int_desc_, false, true); |
| TestValues<int>(1, int_desc_, false, false); |
| TestValues<int>(10, int_desc_, false, false); |
| TestValues<int>(100, int_desc_, false, false); |
| |
| TestValues<StringValue>(1, string_desc_, false, true); |
| TestValues<StringValue>(10, string_desc_, false, true); |
| TestValues<StringValue>(100, string_desc_, false, true); |
| TestValues<StringValue>(1, string_desc_, false, false); |
| TestValues<StringValue>(10, string_desc_, false, false); |
| TestValues<StringValue>(100, string_desc_, false, false); |
| |
| TestIntValuesInterleaved(1, 1, true); |
| TestIntValuesInterleaved(10, 5, true); |
| TestIntValuesInterleaved(100, 15, true); |
| TestIntValuesInterleaved(1, 1, false); |
| TestIntValuesInterleaved(10, 5, false); |
| TestIntValuesInterleaved(100, 15, false); |
| } |
| |
| // Test with only 1 buffer. |
| TEST_F(SimpleTupleStreamTest, OneBufferSpill) { |
| // Each buffer can only hold 128 ints, so this spills quite often. |
| int buffer_size = 128 * sizeof(int); |
| Init(buffer_size); |
| TestValues<int>(1, int_desc_, false, true, buffer_size); |
| TestValues<int>(10, int_desc_, false, true, buffer_size); |
| |
| TestValues<StringValue>(1, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(10, string_desc_, false, true, buffer_size); |
| } |
| |
| // Test with a few buffers. |
| TEST_F(SimpleTupleStreamTest, ManyBufferSpill) { |
| int buffer_size = 128 * sizeof(int); |
| Init(10 * buffer_size); |
| |
| TestValues<int>(1, int_desc_, false, true, buffer_size); |
| TestValues<int>(10, int_desc_, false, true, buffer_size); |
| TestValues<int>(100, int_desc_, false, true, buffer_size); |
| TestValues<StringValue>(1, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(10, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(100, string_desc_, false, true, buffer_size); |
| |
| TestIntValuesInterleaved(1, 1, true, buffer_size); |
| TestIntValuesInterleaved(10, 5, true, buffer_size); |
| TestIntValuesInterleaved(100, 15, true, buffer_size); |
| } |
| |
| void SimpleTupleStreamTest::TestUnpinPin(bool varlen_data, bool read_write) { |
| int buffer_size = 128 * sizeof(int); |
| int num_buffers = 10; |
| Init(num_buffers * buffer_size); |
| RowDescriptor* row_desc = varlen_data ? string_desc_ : int_desc_; |
| |
| BufferedTupleStreamV2 stream(runtime_state_, *row_desc, &client_, buffer_size); |
| ASSERT_OK(stream.Init(-1, true)); |
| if (read_write) { |
| bool got_reservation = false; |
| ASSERT_OK(stream.PrepareForReadWrite(false, &got_reservation)); |
| ASSERT_TRUE(got_reservation); |
| } else { |
| bool got_write_reservation; |
| ASSERT_OK(stream.PrepareForWrite(&got_write_reservation)); |
| ASSERT_TRUE(got_write_reservation); |
| } |
| |
| int offset = 0; |
| bool full = false; |
| int num_batches = 0; |
| while (!full) { |
| // Make sure we can switch between pinned and unpinned states while writing. |
| if (num_batches % 10 == 0) { |
| bool pinned; |
| stream.UnpinStream(BufferedTupleStreamV2::UNPIN_ALL_EXCEPT_CURRENT); |
| ASSERT_OK(stream.PinStream(&pinned)); |
| DCHECK(pinned); |
| } |
| |
| RowBatch* batch = varlen_data ? CreateStringBatch(offset, BATCH_SIZE, false) : |
| CreateIntBatch(offset, BATCH_SIZE, false); |
| int j = 0; |
| for (; j < batch->num_rows(); ++j) { |
| Status status; |
| full = !stream.AddRow(batch->GetRow(j), &status); |
| ASSERT_OK(status); |
| if (full) break; |
| } |
| offset += j; |
| ++num_batches; |
| } |
| |
| stream.UnpinStream(BufferedTupleStreamV2::UNPIN_ALL_EXCEPT_CURRENT); |
| |
| bool pinned = false; |
| ASSERT_OK(stream.PinStream(&pinned)); |
| ASSERT_TRUE(pinned); |
| |
| // Read and verify result a few times. We should be able to reread the stream if |
| // we don't use delete on read mode. |
| int read_iters = 3; |
| for (int i = 0; i < read_iters; ++i) { |
| bool delete_on_read = i == read_iters - 1; |
| if (i > 0 || !read_write) { |
| bool got_read_reservation; |
| ASSERT_OK(stream.PrepareForRead(delete_on_read, &got_read_reservation)); |
| ASSERT_TRUE(got_read_reservation); |
| } |
| |
| if (varlen_data) { |
| vector<StringValue> results; |
| ReadValues(&stream, row_desc, &results); |
| VerifyResults<StringValue>(*string_desc_, results, offset, false); |
| } else { |
| vector<int> results; |
| ReadValues(&stream, row_desc, &results); |
| VerifyResults<int>(*int_desc_, results, offset, false); |
| } |
| } |
| |
| // After delete_on_read, all blocks aside from the last should be deleted. |
| // Note: this should really be 0, but the BufferedTupleStreamV2 returns eos before |
| // deleting the last block, rather than after, so the last block isn't deleted |
| // until the stream is closed. |
| ASSERT_EQ(stream.BytesPinned(false), buffer_size); |
| |
| stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| |
| ASSERT_EQ(stream.BytesPinned(false), 0); |
| } |
| |
| TEST_F(SimpleTupleStreamTest, UnpinPin) { |
| TestUnpinPin(false, false); |
| } |
| |
| TEST_F(SimpleTupleStreamTest, UnpinPinReadWrite) { |
| TestUnpinPin(false, true); |
| } |
| |
| TEST_F(SimpleTupleStreamTest, UnpinPinVarlen) { |
| TestUnpinPin(false, false); |
| } |
| |
| void SimpleTupleStreamTest::TestTransferMemory(bool pin_stream, bool read_write) { |
| // Use smaller buffers so that the explicit FLUSH_RESOURCES flag is required to |
| // make the batch at capacity. |
| int buffer_size = 4 * 1024; |
| Init(100 * buffer_size); |
| |
| BufferedTupleStreamV2 stream(runtime_state_, *int_desc_, &client_, buffer_size); |
| ASSERT_OK(stream.Init(-1, pin_stream)); |
| if (read_write) { |
| bool got_reservation; |
| ASSERT_OK(stream.PrepareForReadWrite(true, &got_reservation)); |
| ASSERT_TRUE(got_reservation); |
| } else { |
| bool got_write_reservation; |
| ASSERT_OK(stream.PrepareForWrite(&got_write_reservation)); |
| ASSERT_TRUE(got_write_reservation); |
| } |
| RowBatch* batch = CreateIntBatch(0, 1024, false); |
| |
| // Construct a stream with 4 blocks. |
| const int total_num_buffers = 4; |
| while (stream.byte_size() < total_num_buffers * buffer_size) { |
| Status status; |
| for (int i = 0; i < batch->num_rows(); ++i) { |
| bool ret = stream.AddRow(batch->GetRow(i), &status); |
| EXPECT_TRUE(ret); |
| ASSERT_OK(status); |
| } |
| } |
| |
| batch->Reset(); |
| stream.Close(batch, RowBatch::FlushMode::FLUSH_RESOURCES); |
| if (pin_stream) { |
| DCHECK_EQ(total_num_buffers, batch->num_buffers()); |
| } else if (read_write) { |
| // Read and write block should be attached. |
| DCHECK_EQ(2, batch->num_buffers()); |
| } else { |
| // Read block should be attached. |
| DCHECK_EQ(1, batch->num_buffers()); |
| } |
| DCHECK(batch->AtCapacity()); // Flush resources flag should have been set. |
| batch->Reset(); |
| DCHECK_EQ(0, batch->num_buffers()); |
| } |
| |
| /// Test attaching memory to a row batch from a pinned stream. |
| TEST_F(SimpleTupleStreamTest, TransferMemoryFromPinnedStreamReadWrite) { |
| TestTransferMemory(true, true); |
| } |
| |
| TEST_F(SimpleTupleStreamTest, TransferMemoryFromPinnedStreamNoReadWrite) { |
| TestTransferMemory(true, false); |
| } |
| |
| /// Test attaching memory to a row batch from an unpinned stream. |
| TEST_F(SimpleTupleStreamTest, TransferMemoryFromUnpinnedStreamReadWrite) { |
| TestTransferMemory(false, true); |
| } |
| |
| TEST_F(SimpleTupleStreamTest, TransferMemoryFromUnpinnedStreamNoReadWrite) { |
| TestTransferMemory(false, false); |
| } |
| |
| // Test that tuple stream functions if it references strings outside stream. The |
| // aggregation node relies on this since it updates tuples in-place. |
| TEST_F(SimpleTupleStreamTest, StringsOutsideStream) { |
| int buffer_size = 8 * 1024 * 1024; |
| Init(2 * buffer_size); |
| Status status = Status::OK(); |
| |
| int num_batches = 100; |
| int rows_added = 0; |
| DCHECK_EQ(string_desc_->tuple_descriptors().size(), 1); |
| TupleDescriptor& tuple_desc = *string_desc_->tuple_descriptors()[0]; |
| |
| set<SlotId> external_slots; |
| for (int i = 0; i < tuple_desc.string_slots().size(); ++i) { |
| external_slots.insert(tuple_desc.string_slots()[i]->id()); |
| } |
| |
| BufferedTupleStreamV2 stream( |
| runtime_state_, *string_desc_, &client_, buffer_size, external_slots); |
| ASSERT_OK(stream.Init(0, false)); |
| |
| for (int i = 0; i < num_batches; ++i) { |
| RowBatch* batch = CreateStringBatch(rows_added, BATCH_SIZE, false); |
| for (int j = 0; j < batch->num_rows(); ++j) { |
| uint8_t* varlen_data; |
| int fixed_size = tuple_desc.byte_size(); |
| uint8_t* tuple = stream.AllocateRow(fixed_size, 0, &varlen_data, &status); |
| ASSERT_TRUE(tuple != nullptr); |
| ASSERT_TRUE(status.ok()); |
| // Copy fixed portion in, but leave it pointing to row batch's varlen data. |
| memcpy(tuple, batch->GetRow(j)->GetTuple(0), fixed_size); |
| } |
| rows_added += batch->num_rows(); |
| } |
| |
| DCHECK_EQ(rows_added, stream.num_rows()); |
| |
| for (int delete_on_read = 0; delete_on_read <= 1; ++delete_on_read) { |
| // Keep stream in memory and test we can read ok. |
| vector<StringValue> results; |
| bool got_read_reservation; |
| ASSERT_OK(stream.PrepareForRead(delete_on_read, &got_read_reservation)); |
| ASSERT_TRUE(got_read_reservation); |
| ReadValues(&stream, string_desc_, &results); |
| VerifyResults<StringValue>(*string_desc_, results, rows_added, false); |
| } |
| |
| stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| } |
| |
| // Construct a big row by stiching together many tuples so the total row size |
| // will be close to the IO block size. With null indicators, stream will fail to |
| // be initialized; Without null indicators, things should work fine. |
| TEST_F(SimpleTupleStreamTest, BigRow) { |
| Init(2 * PAGE_LEN); |
| vector<TupleId> tuple_ids; |
| vector<bool> nullable_tuples; |
| vector<bool> non_nullable_tuples; |
| |
| DescriptorTblBuilder big_row_builder(test_env_->exec_env()->frontend(), &pool_); |
| // Each tuple contains 8 slots of TYPE_INT and a single byte for null indicator. |
| const int num_tuples = PAGE_LEN / (8 * sizeof(int) + 1); |
| for (int tuple_idx = 0; tuple_idx < num_tuples; ++tuple_idx) { |
| big_row_builder.DeclareTuple() << TYPE_INT << TYPE_INT << TYPE_INT << TYPE_INT |
| << TYPE_INT << TYPE_INT << TYPE_INT << TYPE_INT; |
| tuple_ids.push_back(static_cast<TTupleId>(tuple_idx)); |
| nullable_tuples.push_back(true); |
| non_nullable_tuples.push_back(false); |
| } |
| DescriptorTbl* desc = big_row_builder.Build(); |
| |
| // Construct a big row with all non-nullable tuples. |
| RowDescriptor* row_desc = |
| pool_.Add(new RowDescriptor(*desc, tuple_ids, non_nullable_tuples)); |
| ASSERT_FALSE(row_desc->IsAnyTupleNullable()); |
| // Test writing this row into the stream and then reading it back. |
| TestValues<int>(1, row_desc, false, false, PAGE_LEN, 1); |
| TestValues<int>(1, row_desc, false, true, PAGE_LEN, 1); |
| |
| // Construct a big row with nullable tuples. This requires extra space for null |
| // indicators in the stream so adding the row will fail. |
| RowDescriptor* nullable_row_desc = |
| pool_.Add(new RowDescriptor(*desc, tuple_ids, nullable_tuples)); |
| ASSERT_TRUE(nullable_row_desc->IsAnyTupleNullable()); |
| BufferedTupleStreamV2 nullable_stream( |
| runtime_state_, *nullable_row_desc, &client_, PAGE_LEN); |
| ASSERT_OK(nullable_stream.Init(-1, true)); |
| bool got_reservation; |
| Status status = nullable_stream.PrepareForWrite(&got_reservation); |
| EXPECT_EQ(TErrorCode::BTS_BLOCK_OVERFLOW, status.code()); |
| nullable_stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| } |
| |
| // Test for IMPALA-3923: overflow of 32-bit int in GetRows(). |
| TEST_F(SimpleTupleStreamTest, TestGetRowsOverflow) { |
| Init(BUFFER_POOL_LIMIT); |
| BufferedTupleStreamV2 stream(runtime_state_, *int_desc_, &client_, PAGE_LEN); |
| ASSERT_OK(stream.Init(-1, true)); |
| |
| Status status; |
| // Add more rows than can be fit in a RowBatch (limited by its 32-bit row count). |
| // Actually adding the rows would take a very long time, so just set num_rows_. |
| // This puts the stream in an inconsistent state, but exercises the right code path. |
| stream.num_rows_ = 1L << 33; |
| bool got_rows; |
| scoped_ptr<RowBatch> overflow_batch; |
| ASSERT_FALSE(stream.GetRows(&tracker_, &overflow_batch, &got_rows).ok()); |
| stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| } |
| |
| // Basic API test. No data should be going to disk. |
| TEST_F(SimpleNullStreamTest, Basic) { |
| Init(BUFFER_POOL_LIMIT); |
| TestValues<int>(1, int_desc_, false, true); |
| TestValues<int>(10, int_desc_, false, true); |
| TestValues<int>(100, int_desc_, false, true); |
| TestValues<int>(1, int_desc_, true, true); |
| TestValues<int>(10, int_desc_, true, true); |
| TestValues<int>(100, int_desc_, true, true); |
| TestValues<int>(1, int_desc_, false, false); |
| TestValues<int>(10, int_desc_, false, false); |
| TestValues<int>(100, int_desc_, false, false); |
| TestValues<int>(1, int_desc_, true, false); |
| TestValues<int>(10, int_desc_, true, false); |
| TestValues<int>(100, int_desc_, true, false); |
| |
| TestValues<StringValue>(1, string_desc_, false, true); |
| TestValues<StringValue>(10, string_desc_, false, true); |
| TestValues<StringValue>(100, string_desc_, false, true); |
| TestValues<StringValue>(1, string_desc_, true, true); |
| TestValues<StringValue>(10, string_desc_, true, true); |
| TestValues<StringValue>(100, string_desc_, true, true); |
| TestValues<StringValue>(1, string_desc_, false, false); |
| TestValues<StringValue>(10, string_desc_, false, false); |
| TestValues<StringValue>(100, string_desc_, false, false); |
| TestValues<StringValue>(1, string_desc_, true, false); |
| TestValues<StringValue>(10, string_desc_, true, false); |
| TestValues<StringValue>(100, string_desc_, true, false); |
| |
| TestIntValuesInterleaved(1, 1, true); |
| TestIntValuesInterleaved(10, 5, true); |
| TestIntValuesInterleaved(100, 15, true); |
| TestIntValuesInterleaved(1, 1, false); |
| TestIntValuesInterleaved(10, 5, false); |
| TestIntValuesInterleaved(100, 15, false); |
| } |
| |
| // Test tuple stream with only 1 buffer and rows with multiple tuples. |
| TEST_F(MultiTupleStreamTest, MultiTupleOneBufferSpill) { |
| // Each buffer can only hold 128 ints, so this spills quite often. |
| int buffer_size = 128 * sizeof(int); |
| Init(buffer_size); |
| TestValues<int>(1, int_desc_, false, true, buffer_size); |
| TestValues<int>(10, int_desc_, false, true, buffer_size); |
| |
| TestValues<StringValue>(1, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(10, string_desc_, false, true, buffer_size); |
| } |
| |
| // Test with a few buffers and rows with multiple tuples. |
| TEST_F(MultiTupleStreamTest, MultiTupleManyBufferSpill) { |
| int buffer_size = 128 * sizeof(int); |
| Init(10 * buffer_size); |
| |
| TestValues<int>(1, int_desc_, false, true, buffer_size); |
| TestValues<int>(10, int_desc_, false, true, buffer_size); |
| TestValues<int>(100, int_desc_, false, true, buffer_size); |
| |
| TestValues<StringValue>(1, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(10, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(100, string_desc_, false, true, buffer_size); |
| |
| TestIntValuesInterleaved(1, 1, true, buffer_size); |
| TestIntValuesInterleaved(10, 5, true, buffer_size); |
| TestIntValuesInterleaved(100, 15, true, buffer_size); |
| } |
| |
| // Test that we can allocate a row in the stream and copy in multiple tuples then |
| // read it back from the stream. |
| TEST_F(MultiTupleStreamTest, MultiTupleAllocateRow) { |
| // Use small buffers so it will be flushed to disk. |
| int buffer_size = 4 * 1024; |
| Init(2 * buffer_size); |
| Status status = Status::OK(); |
| |
| int num_batches = 1; |
| int rows_added = 0; |
| BufferedTupleStreamV2 stream(runtime_state_, *string_desc_, &client_, buffer_size); |
| ASSERT_OK(stream.Init(-1, false)); |
| bool got_write_reservation; |
| ASSERT_OK(stream.PrepareForWrite(&got_write_reservation)); |
| ASSERT_TRUE(got_write_reservation); |
| |
| for (int i = 0; i < num_batches; ++i) { |
| RowBatch* batch = CreateStringBatch(rows_added, 1, false); |
| for (int j = 0; j < batch->num_rows(); ++j) { |
| TupleRow* row = batch->GetRow(j); |
| int64_t fixed_size = 0; |
| int64_t varlen_size = 0; |
| for (int k = 0; k < string_desc_->tuple_descriptors().size(); k++) { |
| TupleDescriptor* tuple_desc = string_desc_->tuple_descriptors()[k]; |
| fixed_size += tuple_desc->byte_size(); |
| varlen_size += row->GetTuple(k)->VarlenByteSize(*tuple_desc); |
| } |
| uint8_t* varlen_data; |
| uint8_t* fixed_data = |
| stream.AllocateRow(fixed_size, varlen_size, &varlen_data, &status); |
| ASSERT_TRUE(fixed_data != nullptr); |
| ASSERT_TRUE(status.ok()); |
| uint8_t* varlen_write_ptr = varlen_data; |
| for (int k = 0; k < string_desc_->tuple_descriptors().size(); k++) { |
| TupleDescriptor* tuple_desc = string_desc_->tuple_descriptors()[k]; |
| Tuple* src = row->GetTuple(k); |
| Tuple* dst = reinterpret_cast<Tuple*>(fixed_data); |
| fixed_data += tuple_desc->byte_size(); |
| memcpy(dst, src, tuple_desc->byte_size()); |
| for (int l = 0; l < tuple_desc->slots().size(); l++) { |
| SlotDescriptor* slot = tuple_desc->slots()[l]; |
| StringValue* src_string = src->GetStringSlot(slot->tuple_offset()); |
| StringValue* dst_string = dst->GetStringSlot(slot->tuple_offset()); |
| dst_string->ptr = reinterpret_cast<char*>(varlen_write_ptr); |
| memcpy(dst_string->ptr, src_string->ptr, src_string->len); |
| varlen_write_ptr += src_string->len; |
| } |
| } |
| ASSERT_EQ(varlen_data + varlen_size, varlen_write_ptr); |
| } |
| rows_added += batch->num_rows(); |
| } |
| |
| for (int i = 0; i < 3; ++i) { |
| bool delete_on_read = i == 2; |
| vector<StringValue> results; |
| bool got_read_reservation; |
| ASSERT_OK(stream.PrepareForRead(delete_on_read, &got_read_reservation)); |
| ASSERT_TRUE(got_read_reservation); |
| ReadValues(&stream, string_desc_, &results); |
| VerifyResults<StringValue>(*string_desc_, results, rows_added, false); |
| } |
| |
| stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| } |
| |
| // Test with rows with multiple nullable tuples. |
| TEST_F(MultiNullableTupleStreamTest, MultiNullableTupleOneBufferSpill) { |
| // Each buffer can only hold 128 ints, so this spills quite often. |
| int buffer_size = 128 * sizeof(int); |
| Init(buffer_size); |
| TestValues<int>(1, int_desc_, false, true, buffer_size); |
| TestValues<int>(10, int_desc_, false, true, buffer_size); |
| TestValues<int>(1, int_desc_, true, true, buffer_size); |
| TestValues<int>(10, int_desc_, true, true, buffer_size); |
| |
| TestValues<StringValue>(1, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(10, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(1, string_desc_, true, true, buffer_size); |
| TestValues<StringValue>(10, string_desc_, true, true, buffer_size); |
| } |
| |
| // Test with a few buffers. |
| TEST_F(MultiNullableTupleStreamTest, MultiNullableTupleManyBufferSpill) { |
| int buffer_size = 128 * sizeof(int); |
| Init(10 * buffer_size); |
| |
| TestValues<int>(1, int_desc_, false, true, buffer_size); |
| TestValues<int>(10, int_desc_, false, true, buffer_size); |
| TestValues<int>(100, int_desc_, false, true, buffer_size); |
| TestValues<int>(1, int_desc_, true, true, buffer_size); |
| TestValues<int>(10, int_desc_, true, true, buffer_size); |
| TestValues<int>(100, int_desc_, true, true, buffer_size); |
| |
| TestValues<StringValue>(1, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(10, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(100, string_desc_, false, true, buffer_size); |
| TestValues<StringValue>(1, string_desc_, true, true, buffer_size); |
| TestValues<StringValue>(10, string_desc_, true, true, buffer_size); |
| TestValues<StringValue>(100, string_desc_, true, true, buffer_size); |
| |
| TestIntValuesInterleaved(1, 1, true, buffer_size); |
| TestIntValuesInterleaved(10, 5, true, buffer_size); |
| TestIntValuesInterleaved(100, 15, true, buffer_size); |
| } |
| |
| /// Test that ComputeRowSize handles nulls |
| TEST_F(MultiNullableTupleStreamTest, TestComputeRowSize) { |
| Init(BUFFER_POOL_LIMIT); |
| const vector<TupleDescriptor*>& tuple_descs = string_desc_->tuple_descriptors(); |
| // String in second tuple is stored externally. |
| set<SlotId> external_slots; |
| const SlotDescriptor* external_string_slot = tuple_descs[1]->slots()[0]; |
| external_slots.insert(external_string_slot->id()); |
| |
| BufferedTupleStreamV2 stream( |
| runtime_state_, *string_desc_, &client_, PAGE_LEN, external_slots); |
| gscoped_ptr<TupleRow, FreeDeleter> row( |
| reinterpret_cast<TupleRow*>(malloc(tuple_descs.size() * sizeof(Tuple*)))); |
| gscoped_ptr<Tuple, FreeDeleter> tuple0( |
| reinterpret_cast<Tuple*>(malloc(tuple_descs[0]->byte_size()))); |
| gscoped_ptr<Tuple, FreeDeleter> tuple1( |
| reinterpret_cast<Tuple*>(malloc(tuple_descs[1]->byte_size()))); |
| gscoped_ptr<Tuple, FreeDeleter> tuple2( |
| reinterpret_cast<Tuple*>(malloc(tuple_descs[2]->byte_size()))); |
| memset(tuple0.get(), 0, tuple_descs[0]->byte_size()); |
| memset(tuple1.get(), 0, tuple_descs[1]->byte_size()); |
| memset(tuple2.get(), 0, tuple_descs[2]->byte_size()); |
| const int tuple_null_indicator_bytes = 1; // Need 1 bytes for 3 tuples. |
| |
| // All nullable tuples are NULL. |
| row->SetTuple(0, tuple0.get()); |
| row->SetTuple(1, nullptr); |
| row->SetTuple(2, nullptr); |
| EXPECT_EQ(tuple_null_indicator_bytes + tuple_descs[0]->byte_size(), |
| stream.ComputeRowSize(row.get())); |
| |
| // Tuples are initialized to empty and have no var-len data. |
| row->SetTuple(1, tuple1.get()); |
| row->SetTuple(2, tuple2.get()); |
| EXPECT_EQ(tuple_null_indicator_bytes + string_desc_->GetRowSize(), |
| stream.ComputeRowSize(row.get())); |
| |
| // Tuple 0 has some data. |
| const SlotDescriptor* string_slot = tuple_descs[0]->slots()[0]; |
| StringValue* sv = tuple0->GetStringSlot(string_slot->tuple_offset()); |
| *sv = STRINGS[0]; |
| int64_t expected_len = |
| tuple_null_indicator_bytes + string_desc_->GetRowSize() + sv->len; |
| EXPECT_EQ(expected_len, stream.ComputeRowSize(row.get())); |
| |
| // Check that external slots aren't included in count. |
| sv = tuple1->GetStringSlot(external_string_slot->tuple_offset()); |
| sv->ptr = reinterpret_cast<char*>(1234); |
| sv->len = 1234; |
| EXPECT_EQ(expected_len, stream.ComputeRowSize(row.get())); |
| |
| stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| } |
| |
| /// Test that deep copy works with arrays by copying into a BufferedTupleStream, freeing |
| /// the original rows, then reading back the rows and verifying the contents. |
| TEST_F(ArrayTupleStreamTest, TestArrayDeepCopy) { |
| Status status; |
| Init(BUFFER_POOL_LIMIT); |
| const int NUM_ROWS = 4000; |
| BufferedTupleStreamV2 stream(runtime_state_, *array_desc_, &client_, PAGE_LEN); |
| const vector<TupleDescriptor*>& tuple_descs = array_desc_->tuple_descriptors(); |
| // Write out a predictable pattern of data by iterating over arrays of constants. |
| int strings_index = 0; // we take the mod of this as index into STRINGS. |
| int array_lens[] = {0, 1, 5, 10, 1000, 2, 49, 20}; |
| int num_array_lens = sizeof(array_lens) / sizeof(array_lens[0]); |
| int array_len_index = 0; |
| ASSERT_OK(stream.Init(-1, false)); |
| bool got_write_reservation; |
| ASSERT_OK(stream.PrepareForWrite(&got_write_reservation)); |
| ASSERT_TRUE(got_write_reservation); |
| |
| for (int i = 0; i < NUM_ROWS; ++i) { |
| const int tuple_null_indicator_bytes = 1; // Need 1 bytes for 2 tuples. |
| int expected_row_size = tuple_null_indicator_bytes + tuple_descs[0]->byte_size() |
| + tuple_descs[1]->byte_size(); |
| gscoped_ptr<TupleRow, FreeDeleter> row( |
| reinterpret_cast<TupleRow*>(malloc(tuple_descs.size() * sizeof(Tuple*)))); |
| gscoped_ptr<Tuple, FreeDeleter> tuple0( |
| reinterpret_cast<Tuple*>(malloc(tuple_descs[0]->byte_size()))); |
| gscoped_ptr<Tuple, FreeDeleter> tuple1( |
| reinterpret_cast<Tuple*>(malloc(tuple_descs[1]->byte_size()))); |
| memset(tuple0.get(), 0, tuple_descs[0]->byte_size()); |
| memset(tuple1.get(), 0, tuple_descs[1]->byte_size()); |
| row->SetTuple(0, tuple0.get()); |
| row->SetTuple(1, tuple1.get()); |
| |
| // Only array<string> is non-null. |
| tuple0->SetNull(tuple_descs[0]->slots()[1]->null_indicator_offset()); |
| tuple1->SetNull(tuple_descs[1]->slots()[0]->null_indicator_offset()); |
| const SlotDescriptor* array_slot_desc = tuple_descs[0]->slots()[0]; |
| const TupleDescriptor* item_desc = array_slot_desc->collection_item_descriptor(); |
| |
| int array_len = array_lens[array_len_index++ % num_array_lens]; |
| CollectionValue* cv = tuple0->GetCollectionSlot(array_slot_desc->tuple_offset()); |
| cv->ptr = nullptr; |
| cv->num_tuples = 0; |
| CollectionValueBuilder builder( |
| cv, *item_desc, mem_pool_.get(), runtime_state_, array_len); |
| Tuple* array_data; |
| int num_rows; |
| builder.GetFreeMemory(&array_data, &num_rows); |
| expected_row_size += item_desc->byte_size() * array_len; |
| |
| // Fill the array with pointers to our constant strings. |
| for (int j = 0; j < array_len; ++j) { |
| const StringValue* string = &STRINGS[strings_index++ % NUM_STRINGS]; |
| array_data->SetNotNull(item_desc->slots()[0]->null_indicator_offset()); |
| RawValue::Write(string, array_data, item_desc->slots()[0], mem_pool_.get()); |
| array_data += item_desc->byte_size(); |
| expected_row_size += string->len; |
| } |
| builder.CommitTuples(array_len); |
| |
| // Check that internal row size computation gives correct result. |
| EXPECT_EQ(expected_row_size, stream.ComputeRowSize(row.get())); |
| bool b = stream.AddRow(row.get(), &status); |
| ASSERT_TRUE(b); |
| ASSERT_OK(status); |
| mem_pool_->FreeAll(); // Free data as soon as possible to smoke out issues. |
| } |
| |
| // Read back and verify data. |
| bool got_read_reservation; |
| ASSERT_OK(stream.PrepareForRead(false, &got_read_reservation)); |
| ASSERT_TRUE(got_read_reservation); |
| strings_index = 0; |
| array_len_index = 0; |
| bool eos = false; |
| int rows_read = 0; |
| RowBatch batch(*array_desc_, BATCH_SIZE, &tracker_); |
| do { |
| batch.Reset(); |
| ASSERT_OK(stream.GetNext(&batch, &eos)); |
| for (int i = 0; i < batch.num_rows(); ++i) { |
| TupleRow* row = batch.GetRow(i); |
| Tuple* tuple0 = row->GetTuple(0); |
| Tuple* tuple1 = row->GetTuple(1); |
| ASSERT_TRUE(tuple0 != nullptr); |
| ASSERT_TRUE(tuple1 != nullptr); |
| const SlotDescriptor* array_slot_desc = tuple_descs[0]->slots()[0]; |
| ASSERT_FALSE(tuple0->IsNull(array_slot_desc->null_indicator_offset())); |
| ASSERT_TRUE(tuple0->IsNull(tuple_descs[0]->slots()[1]->null_indicator_offset())); |
| ASSERT_TRUE(tuple1->IsNull(tuple_descs[1]->slots()[0]->null_indicator_offset())); |
| |
| const TupleDescriptor* item_desc = array_slot_desc->collection_item_descriptor(); |
| int expected_array_len = array_lens[array_len_index++ % num_array_lens]; |
| CollectionValue* cv = tuple0->GetCollectionSlot(array_slot_desc->tuple_offset()); |
| ASSERT_EQ(expected_array_len, cv->num_tuples); |
| for (int j = 0; j < cv->num_tuples; ++j) { |
| Tuple* item = reinterpret_cast<Tuple*>(cv->ptr + j * item_desc->byte_size()); |
| const SlotDescriptor* string_desc = item_desc->slots()[0]; |
| ASSERT_FALSE(item->IsNull(string_desc->null_indicator_offset())); |
| const StringValue* expected = &STRINGS[strings_index++ % NUM_STRINGS]; |
| const StringValue* actual = item->GetStringSlot(string_desc->tuple_offset()); |
| ASSERT_EQ(*expected, *actual); |
| } |
| } |
| rows_read += batch.num_rows(); |
| } while (!eos); |
| ASSERT_EQ(NUM_ROWS, rows_read); |
| stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| } |
| |
| /// Test that ComputeRowSize handles nulls |
| TEST_F(ArrayTupleStreamTest, TestComputeRowSize) { |
| Init(BUFFER_POOL_LIMIT); |
| const vector<TupleDescriptor*>& tuple_descs = array_desc_->tuple_descriptors(); |
| set<SlotId> external_slots; |
| // Second array slot in first tuple is stored externally. |
| const SlotDescriptor* external_array_slot = tuple_descs[0]->slots()[1]; |
| external_slots.insert(external_array_slot->id()); |
| |
| BufferedTupleStreamV2 stream( |
| runtime_state_, *array_desc_, &client_, PAGE_LEN, external_slots); |
| gscoped_ptr<TupleRow, FreeDeleter> row( |
| reinterpret_cast<TupleRow*>(malloc(tuple_descs.size() * sizeof(Tuple*)))); |
| gscoped_ptr<Tuple, FreeDeleter> tuple0( |
| reinterpret_cast<Tuple*>(malloc(tuple_descs[0]->byte_size()))); |
| gscoped_ptr<Tuple, FreeDeleter> tuple1( |
| reinterpret_cast<Tuple*>(malloc(tuple_descs[1]->byte_size()))); |
| memset(tuple0.get(), 0, tuple_descs[0]->byte_size()); |
| memset(tuple1.get(), 0, tuple_descs[1]->byte_size()); |
| |
| const int tuple_null_indicator_bytes = 1; // Need 1 bytes for 3 tuples. |
| |
| // All tuples are NULL - only need null indicators. |
| row->SetTuple(0, nullptr); |
| row->SetTuple(1, nullptr); |
| EXPECT_EQ(tuple_null_indicator_bytes, stream.ComputeRowSize(row.get())); |
| |
| // Tuples are initialized to empty and have no var-len data. |
| row->SetTuple(0, tuple0.get()); |
| row->SetTuple(1, tuple1.get()); |
| EXPECT_EQ(tuple_null_indicator_bytes + array_desc_->GetRowSize(), |
| stream.ComputeRowSize(row.get())); |
| |
| // Tuple 0 has an array. |
| int expected_row_size = tuple_null_indicator_bytes + array_desc_->GetRowSize(); |
| const SlotDescriptor* array_slot = tuple_descs[0]->slots()[0]; |
| const TupleDescriptor* item_desc = array_slot->collection_item_descriptor(); |
| int array_len = 128; |
| CollectionValue* cv = tuple0->GetCollectionSlot(array_slot->tuple_offset()); |
| CollectionValueBuilder builder( |
| cv, *item_desc, mem_pool_.get(), runtime_state_, array_len); |
| Tuple* array_data; |
| int num_rows; |
| builder.GetFreeMemory(&array_data, &num_rows); |
| expected_row_size += item_desc->byte_size() * array_len; |
| |
| // Fill the array with pointers to our constant strings. |
| for (int i = 0; i < array_len; ++i) { |
| const StringValue* str = &STRINGS[i % NUM_STRINGS]; |
| array_data->SetNotNull(item_desc->slots()[0]->null_indicator_offset()); |
| RawValue::Write(str, array_data, item_desc->slots()[0], mem_pool_.get()); |
| array_data += item_desc->byte_size(); |
| expected_row_size += str->len; |
| } |
| builder.CommitTuples(array_len); |
| EXPECT_EQ(expected_row_size, stream.ComputeRowSize(row.get())); |
| |
| // Check that the external slot isn't included in size. |
| cv = tuple0->GetCollectionSlot(external_array_slot->tuple_offset()); |
| // ptr of external slot shouldn't be dereferenced when computing size. |
| cv->ptr = reinterpret_cast<uint8_t*>(1234); |
| cv->num_tuples = 1234; |
| EXPECT_EQ(expected_row_size, stream.ComputeRowSize(row.get())); |
| |
| // Check that the array is excluded if tuple 0's array has its null indicator set. |
| tuple0->SetNull(array_slot->null_indicator_offset()); |
| EXPECT_EQ(tuple_null_indicator_bytes + array_desc_->GetRowSize(), |
| stream.ComputeRowSize(row.get())); |
| |
| stream.Close(nullptr, RowBatch::FlushMode::NO_FLUSH_RESOURCES); |
| } |
| } |
| |
| int main(int argc, char** argv) { |
| ::testing::InitGoogleTest(&argc, argv); |
| impala::InitCommonRuntime(argc, argv, true, impala::TestInfo::BE_TEST); |
| impala::InitFeSupport(); |
| impala::LlvmCodeGen::InitializeLlvm(); |
| return RUN_ALL_TESTS(); |
| } |