testdata/bin/create-load-data.sh

#!/bin/bash
#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#
# This script can be executed in two ways:
# 1) Without any command line parameters - A normal data load will happen where data is
# generated as needed, generally by issuing 'INSERT INTO <table> SELECT *' commands.
# 2) With a command line parameter pointing to a test-warehouse snapshot file - In this
# case the snapshot file contents will be copied into HDFS prior to calling the data load
# scripts. This speeds up overall data loading time because it usually means only the
# table metadata needs to be created.
#
# For more information look at testdata/bin/load-test-warehouse-snapshot.sh and
# bin/load-data.py

set -euo pipefail
. $IMPALA_HOME/bin/report_build_error.sh
setup_report_build_error

. ${IMPALA_HOME}/bin/impala-config.sh > /dev/null 2>&1
. ${IMPALA_HOME}/testdata/bin/run-step.sh

# Environment variables used to direct the data loading process to an external cluster.
# TODO: We need a better way of managing how these get set. See IMPALA-4346
: ${HS2_HOST_PORT=localhost:11050}
: ${HDFS_NN=${INTERNAL_LISTEN_HOST}:20500}
: ${IMPALAD=localhost}
: ${REMOTE_LOAD=}
: ${CM_HOST=}
: ${IMPALA_SERIAL_DATALOAD=}
# We don't expect dataload to take more than 2.5 hours.
: ${TIMEOUT_FOR_CREATE_LOAD_DATA_MINS:= 150}

SKIP_METADATA_LOAD=0
SKIP_SNAPSHOT_LOAD=0
SKIP_RANGER=0
SNAPSHOT_FILE=""
LOAD_DATA_ARGS=""
EXPLORATION_STRATEGY="exhaustive"
export JDBC_URL="jdbc:hive2://${HS2_HOST_PORT}/default;"
HIVE_CMD="beeline -n $USER -u $JDBC_URL"

# For logging when using run-step.
LOG_DIR=${IMPALA_DATA_LOADING_LOGS_DIR}

echo "Executing: create-load-data.sh $@"

while [ -n "$*" ]
do
  case $1 in
    -exploration_strategy)
      EXPLORATION_STRATEGY=${2-}
      if [[ -z "$EXPLORATION_STRATEGY" ]]; then
        echo "Must provide an exploration strategy from e.g. core, exhaustive"
        exit 1;
      fi
      shift;
      ;;
    -skip_metadata_load)
      SKIP_METADATA_LOAD=1
      ;;
    -skip_snapshot_load)
      SKIP_SNAPSHOT_LOAD=1
      ;;
    -snapshot_file)
      SNAPSHOT_FILE=${2-}
      if [ ! -f $SNAPSHOT_FILE ]; then
        echo "-snapshot_file does not exist: $SNAPSHOT_FILE"
        exit 1;
      fi
      shift;
      ;;
    -cm_host)
      CM_HOST=${2-}
      shift;
      ;;
    -skip_ranger)
      SKIP_RANGER=1
      ;;
    -timeout)
      TIMEOUT_FOR_CREATE_LOAD_DATA_MINS=${2-}
      shift;
      ;;
    -help|-h|*)
      echo "create-load-data.sh : Creates data and loads from scratch"
      echo "[-skip_metadata_load] : Skips loading of metadata"
      echo "[-skip_snapshot_load] : Assumes that the snapshot is already loaded"
      echo "[-snapshot_file] : Loads the test warehouse snapshot into hdfs"
      echo "[-cm_host] : Address of the Cloudera Manager host if loading to a remote cluster"
      echo "[-skip_ranger] : Skip the set-up for Ranger."
      echo "[-timeout] : The timeout in minutes for loading data."
      exit 1;
      ;;
    esac
  shift;
done

if [[ -n $REMOTE_LOAD ]]; then
  SKIP_RANGER=1
fi

"${IMPALA_HOME}/bin/script-timeout-check.sh" -timeout $TIMEOUT_FOR_CREATE_LOAD_DATA_MINS \
    -script_name "$(basename $0)" &
TIMEOUT_PID=$!

SCHEMA_MISMATCH_ERROR="A schema change has been detected in the metadata, "
SCHEMA_MISMATCH_ERROR+="but it cannot be loaded on Isilon, s3, gcs, cos, oss, obs or "
SCHEMA_MISMATCH_ERROR+="local filesystem, and the filesystem is ${TARGET_FILESYSTEM}".

if [[ $SKIP_METADATA_LOAD -eq 0  && "$SNAPSHOT_FILE" = "" ]]; then
  run-step "Generating HBase data" create-hbase.log \
      ${IMPALA_HOME}/testdata/bin/create-hbase.sh
  run-step "Creating /test-warehouse HDFS directory" create-test-warehouse-dir.log \
      hadoop fs -mkdir -p /test-warehouse
elif [ $SKIP_SNAPSHOT_LOAD -eq 0 ]; then
  run-step "Loading HDFS data from snapshot: $SNAPSHOT_FILE" \
      load-test-warehouse-snapshot.log \
      ${IMPALA_HOME}/testdata/bin/load-test-warehouse-snapshot.sh "$SNAPSHOT_FILE"
  # Don't skip the metadata load if a schema change is detected.
  if ! ${IMPALA_HOME}/testdata/bin/check-schema-diff.sh; then
    if [[ "${TARGET_FILESYSTEM}" == "isilon" || "${TARGET_FILESYSTEM}" == "s3" || \
          "${TARGET_FILESYSTEM}" == "local" || "${TARGET_FILESYSTEM}" == "gs" || \
          "${TARGET_FILESYSTEM}" == "cosn" || "${TARGET_FILESYSTEM}" == "oss" || \
          "${TARGET_FILESYSTEM}" == "obs" || "${TARGET_FILESYSTEM}" == "ozone" ]] ; then
      echo "ERROR in $0 at line $LINENO: A schema change has been detected in the"
      echo "metadata, but it cannot be loaded on isilon, s3, gcs, cos, oss, obs, ozone,"
      echo "or local and the target file system is ${TARGET_FILESYSTEM}.  Exiting."
      # Generate an explicit JUnitXML symptom report here for easier triaging
      ${IMPALA_HOME}/bin/generate_junitxml.py --phase=dataload \
          --step=check-schema-diff.sh --error "${SCHEMA_MISMATCH_ERROR}"
      exit 1
    fi
    echo "Schema change detected, metadata will be loaded."
    SKIP_METADATA_LOAD=0
  fi
else
  # hdfs data already exists, don't load it.
  echo Skipping loading data to hdfs.
fi

echo "Derived params for create-load-data.sh:"
echo "EXPLORATION_STRATEGY=${EXPLORATION_STRATEGY:-}"
echo "SKIP_METADATA_LOAD=${SKIP_METADATA_LOAD:-}"
echo "SKIP_SNAPSHOT_LOAD=${SKIP_SNAPSHOT_LOAD:-}"
echo "SNAPSHOT_FILE=${SNAPSHOT_FILE:-}"
echo "CM_HOST=${CM_HOST:-}"
echo "REMOTE_LOAD=${REMOTE_LOAD:-}"

function start-impala {
  : ${START_CLUSTER_ARGS=""}
  # Use a fast statestore update so that DDL operations run faster.
  START_CLUSTER_ARGS_INT="--state_store_args=--statestore_update_frequency_ms=50"
  # Disable strict datafile location checks for Iceberg tables
  DATAFILE_LOCATION_CHECK="-iceberg_allow_datafiles_in_table_location_only=false"
  START_CLUSTER_ARGS_INT+=("--catalogd_args=$DATAFILE_LOCATION_CHECK")
  if [[ "${TARGET_FILESYSTEM}" == "local" ]]; then
    START_CLUSTER_ARGS_INT+=("--impalad_args=--abort_on_config_error=false -s 1")
  else
    START_CLUSTER_ARGS_INT+=("-s 3")
  fi
  START_CLUSTER_ARGS_INT+=("${START_CLUSTER_ARGS}")
  ${IMPALA_HOME}/bin/start-impala-cluster.py --log_dir=${IMPALA_DATA_LOADING_LOGS_DIR} \
    ${START_CLUSTER_ARGS_INT[@]}
}

function restart-cluster {
  # Break out each individual step for clarity
  echo "Shutting down Impala"
  ${IMPALA_HOME}/bin/start-impala-cluster.py --kill
  echo "Shutting down the minicluster"
  ${IMPALA_HOME}/testdata/bin/kill-all.sh
  echo "Starting the minicluster"
  ${IMPALA_HOME}/testdata/bin/run-all.sh
  echo "Starting Impala"
  start-impala
}

function load-custom-schemas {
  # HDFS commandline calls are slow, so consolidate the manipulation into
  # as few calls as possible by populating a temporary directory with the
  # appropriate structure and copying it in a single call.
  TMP_DIR=$(mktemp -d)

  # Cleanup old schemas dir
  hadoop fs -rm -r -f /test-warehouse/schemas
  SCHEMA_SRC_DIR=${IMPALA_HOME}/testdata/data/schemas
  SCHEMA_TMP_DIR="${TMP_DIR}/schemas"
  mkdir ${SCHEMA_TMP_DIR}
  mkdir ${SCHEMA_TMP_DIR}/enum
  ln -s ${SCHEMA_SRC_DIR}/zipcode_incomes.parquet ${SCHEMA_TMP_DIR}
  ln -s ${SCHEMA_SRC_DIR}/alltypestiny.parquet ${SCHEMA_TMP_DIR}
  ln -s ${SCHEMA_SRC_DIR}/enum/* ${SCHEMA_TMP_DIR}/enum
  ln -s ${SCHEMA_SRC_DIR}/malformed_decimal_tiny.parquet ${SCHEMA_TMP_DIR}
  ln -s ${SCHEMA_SRC_DIR}/decimal.parquet ${SCHEMA_TMP_DIR}
  ln -s ${SCHEMA_SRC_DIR}/nested/modern_nested.parquet ${SCHEMA_TMP_DIR}
  ln -s ${SCHEMA_SRC_DIR}/nested/legacy_nested.parquet ${SCHEMA_TMP_DIR}

  # CHAR and VARCHAR tables written by Hive
  mkdir -p ${TMP_DIR}/chars_formats_avro_snap \
   ${TMP_DIR}/chars_formats_parquet \
   ${TMP_DIR}/chars_formats_text \
   ${TMP_DIR}/chars_formats_orc_def \
   ${TMP_DIR}/chars_formats_json

  ln -s ${IMPALA_HOME}/testdata/data/chars-formats.avro ${TMP_DIR}/chars_formats_avro_snap
  ln -s ${IMPALA_HOME}/testdata/data/chars-formats.parquet ${TMP_DIR}/chars_formats_parquet
  ln -s ${IMPALA_HOME}/testdata/data/chars-formats.orc ${TMP_DIR}/chars_formats_orc_def
  ln -s ${IMPALA_HOME}/testdata/data/chars-formats.txt ${TMP_DIR}/chars_formats_text
  ln -s ${IMPALA_HOME}/testdata/data/chars-formats.json ${TMP_DIR}/chars_formats_json

  # File used by CreateTableLikeOrc tests
  ln -s ${IMPALA_HOME}/testdata/data/alltypes_non_acid.orc ${SCHEMA_TMP_DIR}

  hadoop fs -put -f ${TMP_DIR}/* /test-warehouse

  rm -r ${TMP_DIR}
}

function load-data {
  WORKLOAD=${1}
  EXPLORATION_STRATEGY=${2:-"core"}
  TABLE_FORMATS=${3:-}
  FORCE_LOAD=${4:-}

  LOAD_MSG="Loading workload '$WORKLOAD'"
  ARGS=("--workloads $WORKLOAD")
  LOAD_MSG+=" using exploration strategy '$EXPLORATION_STRATEGY'"
  ARGS+=("-e $EXPLORATION_STRATEGY")
  if [ $TABLE_FORMATS ]; then
    LOAD_MSG+=" in table formats '$TABLE_FORMATS'"
    ARGS+=("--table_formats $TABLE_FORMATS")
  fi
  if [ $LOAD_DATA_ARGS ]; then
    ARGS+=("$LOAD_DATA_ARGS")
  fi
  # functional-query is unique. The dataset name is not the same as the workload name.
  if [ "${WORKLOAD}" = "functional-query" ]; then
    WORKLOAD="functional"
  fi

  # TODO: Why is there a REMOTE_LOAD condition? See IMPALA-4347
  #
  # Force load the dataset if we detect a schema change.
  if [[ -z "$REMOTE_LOAD" ]]; then
    if ! ${IMPALA_HOME}/testdata/bin/check-schema-diff.sh $WORKLOAD; then
      ARGS+=("--force")
      echo "Force loading $WORKLOAD because a schema change was detected"
    elif [ "${FORCE_LOAD}" = "force" ]; then
      ARGS+=("--force")
      echo "Force loading."
    fi
  fi

  ARGS+=("--impalad ${IMPALAD}")
  ARGS+=("--hive_hs2_hostport ${HS2_HOST_PORT}")
  ARGS+=("--hdfs_namenode ${HDFS_NN}")

  # Disable parallelism for dataload if IMPALA_SERIAL_DATALOAD is set
  if [[ "${IMPALA_SERIAL_DATALOAD}" -eq 1 ]]; then
    ARGS+=("--num_processes 1")
  fi

  if [[ -n ${TABLE_FORMATS} ]]; then
    # TBL_FMT_STR replaces slashes with underscores,
    # e.g., kudu/none/none -> kudu_none_none
    TBL_FMT_STR=${TABLE_FORMATS//[\/]/_}
    LOG_BASENAME=data-load-${WORKLOAD}-${EXPLORATION_STRATEGY}-${TBL_FMT_STR}.log
  else
    LOG_BASENAME=data-load-${WORKLOAD}-${EXPLORATION_STRATEGY}.log
  fi

  LOG_FILE=${IMPALA_DATA_LOADING_LOGS_DIR}/${LOG_BASENAME}
  echo "$LOAD_MSG. Logging to ${LOG_FILE}"
  # Use unbuffered logging by executing with -u
  if ! impala-python -u ${IMPALA_HOME}/bin/load-data.py ${ARGS[@]} &> ${LOG_FILE}; then
    echo Error loading data. The end of the log file is:
    tail -n 50 $LOG_FILE
    return 1
  fi
}

function load-tpcds-data {
  load-data "tpcds" "core"
  load-data "tpcds_partitioned" "core"
}

function cache-test-tables {
  echo CACHING  tpch.nation AND functional.alltypestiny
  # uncaching the tables first makes this operation idempotent.
  ${IMPALA_HOME}/bin/impala-shell.sh -i ${IMPALAD}\
    -q "alter table functional.alltypestiny set uncached"
  ${IMPALA_HOME}/bin/impala-shell.sh -i ${IMPALAD}\
    -q "alter table tpch.nation set uncached"
  ${IMPALA_HOME}/bin/impala-shell.sh -i ${IMPALAD}\
    -q "alter table tpch.nation set cached in 'testPool'"
  ${IMPALA_HOME}/bin/impala-shell.sh -i ${IMPALAD} -q\
    "alter table functional.alltypestiny set cached in 'testPool'"
}

function load-aux-workloads {
  LOG_FILE=${IMPALA_DATA_LOADING_LOGS_DIR}/data-load-auxiliary-workloads-core.log
  rm -f $LOG_FILE
  # Load all the auxiliary workloads (if any exist)
  if [ -d ${IMPALA_AUX_WORKLOAD_DIR} ] && [ -d ${IMPALA_AUX_DATASET_DIR} ]; then
    echo Loading auxiliary workloads. Logging to $LOG_FILE.
    if ! impala-python -u ${IMPALA_HOME}/bin/load-data.py --workloads all\
        --impalad=${IMPALAD}\
        --hive_hs2_hostport=${HS2_HOST_PORT}\
        --hdfs_namenode=${HDFS_NN}\
        --workload_dir=${IMPALA_AUX_WORKLOAD_DIR}\
        --dataset_dir=${IMPALA_AUX_DATASET_DIR}\
        --exploration_strategy=core ${LOAD_DATA_ARGS} >> $LOG_FILE 2>&1; then
      echo Error loading aux workloads. The end of the log file is:
      tail -n 20 $LOG_FILE
      return 1
    fi
  else
    echo "Skipping load of auxilary workloads because directories do not exist"
  fi
}

function copy-and-load-dependent-tables {
  # COPY
  # TODO: The multi-format table will move these files. So we need to copy them to a
  # temporary location for that table to use. Should find a better way to handle this.
  echo COPYING AND LOADING DATA FOR DEPENDENT TABLES
  hadoop fs -rm -r -f /test-warehouse/alltypesmixedformat \
    /tmp/alltypes_rc /tmp/alltypes_seq /tmp/alltypes_parquet
  hadoop fs -mkdir -p /tmp/alltypes_seq/year=2009 \
    /tmp/alltypes_rc/year=2009 /tmp/alltypes_parquet/year=2009

  # The file written by hive to /test-warehouse will be strangely replicated rather than
  # erasure coded if EC is not set in /tmp
  if [[ -n "${HDFS_ERASURECODE_POLICY:-}" ]]; then
    hdfs ec -setPolicy -policy "${HDFS_ERASURECODE_POLICY}" -path "/tmp/alltypes_rc"
    hdfs ec -setPolicy -policy "${HDFS_ERASURECODE_POLICY}" -path "/tmp/alltypes_seq"
    hdfs ec -setPolicy -policy "${HDFS_ERASURECODE_POLICY}" -path "/tmp/alltypes_parquet"
  fi

  hadoop fs -cp /test-warehouse/alltypes_seq/year=2009/month=2/ /tmp/alltypes_seq/year=2009
  hadoop fs -cp /test-warehouse/alltypes_rc/year=2009/month=3/ /tmp/alltypes_rc/year=2009
  hadoop fs -cp /test-warehouse/alltypes_parquet/year=2009/month=4/ /tmp/alltypes_parquet/year=2009

  # Create a hidden file in AllTypesSmall
  hadoop fs -cp -f /test-warehouse/zipcode_incomes/DEC_00_SF3_P077_with_ann_noheader.csv \
   /test-warehouse/alltypessmall/year=2009/month=1/_hidden
  hadoop fs -cp -f /test-warehouse/zipcode_incomes/DEC_00_SF3_P077_with_ann_noheader.csv \
   /test-warehouse/alltypessmall/year=2009/month=1/.hidden

  # In case the data is updated by a non-super user, make sure the user can write
  # by chmoding 777 /tmp/alltypes_rc and /tmp/alltypes_seq. This is needed in order
  # to prevent this error during data load to a remote cluster:
  #
  #   ERROR : Failed with exception Unable to move source hdfs://cluster-1.foo.cloudera.com:
  #   8020/tmp/alltypes_seq/year=2009/month=2/000023_0 to destination hdfs://cluster-1.foo.
  #   cloudera.com:8020/test-warehouse/alltypesmixedformat/year=2009/month=2/000023_0
  #   [...]
  #   Caused by: org.apache.hadoop.security.AccessControlException:
  #   Permission denied: user=impala, access=WRITE
  #   inode="/tmp/alltypes_seq/year=2009/month=2":hdfs:supergroup:drwxr-xr-x
  #
  # The error occurs while loading dependent tables.
  #
  # See: logs/data_loading/copy-and-load-dependent-tables.log)
  # See also: IMPALA-4345
  hadoop fs -chmod -R 777 /tmp/alltypes_rc /tmp/alltypes_seq /tmp/alltypes_parquet

  # For tables that rely on loading data from local fs test-wareload-house
  # TODO: Find a good way to integrate this with the normal data loading scripts
  beeline -n $USER -u "${JDBC_URL}" -f\
    ${IMPALA_HOME}/testdata/bin/load-dependent-tables.sql
}

function create-internal-hbase-table {
  # TODO: For some reason DROP TABLE IF EXISTS sometimes fails on HBase if the table does
  # not exist. To work around this, disable exit on error before executing this command.
  # Need to investigate this more, but this works around the problem to unblock automation.
  set +o errexit
  beeline -n $USER -u "${JDBC_URL}" -e\
    "DROP TABLE IF EXISTS functional_hbase.internal_hbase_table;"
  echo "disable 'functional_hbase.internal_hbase_table'" | hbase shell
  echo "drop 'functional_hbase.internal_hbase_table'" | hbase shell
  set -e
  # Used by CatalogTest to confirm that non-external HBase tables are identified
  # correctly (IMP-581)
  # Note that the usual 'hbase.table.name' property is not specified to avoid
  # creating tables in HBase as a side-effect.
  cat > /tmp/create-hbase-internal.sql << EOF
    CREATE TABLE functional_hbase.internal_hbase_table(key int, value string)
    STORED BY 'org.apache.hadoop.hive.hbase.HBaseStorageHandler'
    WITH SERDEPROPERTIES ("hbase.columns.mapping" = ":key,cf1:val");
EOF
  beeline -n $USER -u "${JDBC_URL}" -f /tmp/create-hbase-internal.sql
  rm -f /tmp/create-hbase-internal.sql
}

function load-custom-data {
  # Add a sequence file that only contains a header (see IMPALA-362)
  hadoop fs -put -f ${IMPALA_HOME}/testdata/tinytable_seq_snap/tinytable_seq_snap_header_only \
                    /test-warehouse/tinytable_seq_snap

  # IMPALA-1619: payload compressed with snappy used for constructing large snappy block
  # compressed file
  hadoop fs -put -f ${IMPALA_HOME}/testdata/compressed_formats/compressed_payload.snap \
                    /test-warehouse/compressed_payload.snap

  # Create Avro tables
  beeline -n $USER -u "${JDBC_URL}" -f\
    ${IMPALA_HOME}/testdata/avro_schema_resolution/create_table.sql

  # Delete potentially existing avro data
  hadoop fs -rm -f /test-warehouse/avro_schema_resolution_test/*.avro

  # Upload Avro data to the 'schema_resolution_test' table
  hadoop fs -put ${IMPALA_HOME}/testdata/avro_schema_resolution/records*.avro \
    /test-warehouse/avro_schema_resolution_test
}

function build-and-copy-hive-udfs {
  # Build the test Hive UDFs
  pushd ${IMPALA_HOME}/java/test-hive-udfs
  ${IMPALA_HOME}/bin/mvn-quiet.sh clean
  ${IMPALA_HOME}/bin/mvn-quiet.sh package
  popd
  # Copy the test UDF/UDA libraries into HDFS
  ${IMPALA_HOME}/testdata/bin/copy-udfs-udas.sh -build
}

# Additional data loading actions that must be executed after the main data is loaded.
function custom-post-load-steps {
  # TODO: Why is there a REMOTE_LOAD condition? See IMPALA-4347
  if [[ -z "$REMOTE_LOAD" ]]; then
    # Configure alltypes_seq as a read-only table. This is required for fe tests.
    # Set both read and execute permissions because accessing the contents of a directory on
    # the local filesystem requires the x permission (while on HDFS it requires the r
    # permission).
    hadoop fs -chmod -R 555 \
      ${FILESYSTEM_PREFIX}/test-warehouse/alltypes_seq/year=2009/month=1 \
      ${FILESYSTEM_PREFIX}/test-warehouse/alltypes_seq/year=2009/month=3
  fi

  hadoop fs -mkdir -p ${FILESYSTEM_PREFIX}/test-warehouse/lineitem_multiblock_parquet \
    ${FILESYSTEM_PREFIX}/test-warehouse/lineitem_sixblocks_parquet \
    ${FILESYSTEM_PREFIX}/test-warehouse/lineitem_multiblock_one_row_group_parquet \
    ${FILESYSTEM_PREFIX}/test-warehouse/lineitem_multiblock_variable_num_rows_parquet

  #IMPALA-1881: data file produced by hive with multiple blocks.
  hadoop fs -Ddfs.block.size=1048576 -put -f \
    ${IMPALA_HOME}/testdata/LineItemMultiBlock/000000_0 \
    ${FILESYSTEM_PREFIX}/test-warehouse/lineitem_multiblock_parquet

  # IMPALA-2466: Add more tests to the HDFS Parquet scanner (Added after IMPALA-1881)
  hadoop fs -Ddfs.block.size=1048576 -put -f \
    ${IMPALA_HOME}/testdata/LineItemMultiBlock/lineitem_sixblocks.parquet \
    ${FILESYSTEM_PREFIX}/test-warehouse/lineitem_sixblocks_parquet

  # IMPALA-2466: Add more tests to the HDFS Parquet scanner (this has only one row group)
  hadoop fs -Ddfs.block.size=1048576 -put -f \
    ${IMPALA_HOME}/testdata/LineItemMultiBlock/lineitem_one_row_group.parquet \
    ${FILESYSTEM_PREFIX}/test-warehouse/lineitem_multiblock_one_row_group_parquet

  # IMPALA-11350: Add tests for row groups with variable num rows.
  hadoop fs -Ddfs.block.size=1048576 -put -f \
    ${IMPALA_HOME}/testdata/LineItemMultiBlock/lineitem_multiblock_variable_num_rows.parquet \
    ${FILESYSTEM_PREFIX}/test-warehouse/lineitem_multiblock_variable_num_rows_parquet

  # IMPALA-3307: Upload test time-zone database
  hadoop fs -Ddfs.block.size=1048576 -put -f ${IMPALA_HOME}/testdata/tzdb \
    ${FILESYSTEM_PREFIX}/test-warehouse/
}

function copy-and-load-ext-data-source {
  # Copy the test data source library into HDFS
  ${IMPALA_HOME}/testdata/bin/copy-ext-data-sources.sh
  # Load the underlying data of the data source
  ${IMPALA_HOME}/testdata/bin/load-ext-data-sources.sh
  # Create data sources table.
  ${IMPALA_HOME}/bin/impala-shell.sh -i ${IMPALAD} -f\
    ${IMPALA_HOME}/testdata/bin/create-ext-data-source-table.sql
}

function check-hdfs-health {
  if [[ -n "${HDFS_ERASURECODE_POLICY:-}" ]]; then
    if ! grep "Replicated Blocks:[[:space:]]*#[[:space:]]*Total size:[[:space:]]*0 B"\
        <<< $(hdfs fsck /test-warehouse | tr '\n' '#'); then
        echo "There are some replicated files despite that erasure coding is on"
        echo "Failing the data loading job"
        exit 1
    fi
    return
  fi
  MAX_FSCK=30
  SLEEP_SEC=120
  LAST_NUMBER_UNDER_REPLICATED=-1
  for ((FSCK_COUNT = 0; FSCK_COUNT <= MAX_FSCK; FSCK_COUNT++)); do
    FSCK_OUTPUT="$(hdfs fsck /test-warehouse)"
    echo "$FSCK_OUTPUT"
    NUMBER_UNDER_REPLICATED=$(
        grep -oP "Under-replicated blocks:[[:space:]]*\K[[:digit:]]*" <<< "$FSCK_OUTPUT")
    if [[ "$NUMBER_UNDER_REPLICATED" -eq 0 ]] ; then
      # All the blocks are fully-replicated. The data loading can continue.
      return
    fi
    if [[ $(($FSCK_COUNT + 1)) -eq "$MAX_FSCK" ]] ; then
      echo "Some HDFS blocks are still under-replicated after running HDFS fsck"\
          "$MAX_FSCK times."
      echo "Some tests cannot pass without fully-replicated blocks (IMPALA-3887)."
      echo "Failing the data loading."
      exit 1
    fi
    if [[ "$NUMBER_UNDER_REPLICATED" -eq "$LAST_NUMBER_UNDER_REPLICATED" ]] ; then
      echo "There are under-replicated blocks in HDFS and HDFS is not making progress"\
          "in $SLEEP_SEC seconds. Attempting to restart HDFS to resolve this issue."
      # IMPALA-7119: Other minicluster components (like HBase) can fail if HDFS is
      # restarted by itself, so restart the whole cluster, including Impala.
      restart-cluster
    fi
    LAST_NUMBER_UNDER_REPLICATED="$NUMBER_UNDER_REPLICATED"
    echo "$NUMBER_UNDER_REPLICATED under replicated blocks remaining."
    echo "Sleeping for $SLEEP_SEC seconds before rechecking."
    sleep "$SLEEP_SEC"
  done
}

function warm-up-hive {
  echo "Running warm up Hive statements"
  $HIVE_CMD -e "create database if not exists functional;"
  $HIVE_CMD -e "create table if not exists hive_warm_up_tbl (i int);"
  # The insert below starts a Tez session (if Hive uses Tez) and initializes
  # .hiveJars directory in HDFS, see IMPALA-8841.
  $HIVE_CMD -e "insert overwrite table hive_warm_up_tbl values (1);"
}

# For kerberized clusters, use kerberos
if ${CLUSTER_DIR}/admin is_kerberized; then
  LOAD_DATA_ARGS="${LOAD_DATA_ARGS} --use_kerberos --principal=${MINIKDC_PRINC_HIVE}"
fi

# Start Impala
if [[ -z "$REMOTE_LOAD" ]]; then
  run-step "Starting Impala cluster" start-impala-cluster.log start-impala
fi

# The hdfs environment script sets up kms (encryption) and cache pools (hdfs caching).
# On a non-hdfs filesystem, we don't test encryption or hdfs caching, so this setup is not
# needed.
if [[ "${TARGET_FILESYSTEM}" == "hdfs" ]]; then
  run-step "Setting up HDFS environment" setup-hdfs-env.log \
      ${IMPALA_HOME}/testdata/bin/setup-hdfs-env.sh
fi

if [ $SKIP_METADATA_LOAD -eq 0 ]; then
  # Using Hive in non-parallel mode before starting parallel execution may help with some
  # flakiness during data load, see IMPALA-8841. The problem only occurs in Hive 3
  # environment, but always doing the warm up shouldn't hurt much and may make it easier
  # to investigate future issues where Hive doesn't work at all.
  warm-up-hive
  run-step "Loading custom schemas" load-custom-schemas.log load-custom-schemas
  # Run some steps in parallel, with run-step-backgroundable / run-step-wait-all.
  # This is effective on steps that take a long time and don't depend on each
  # other. Functional-query takes about ~35 minutes, and TPC-H and TPC-DS can
  # finish while functional-query is running.
  run-step-backgroundable "Loading functional-query data" load-functional-query.log \
      load-data "functional-query" "exhaustive"
  run-step-backgroundable "Loading TPC-H data" load-tpch.log load-data "tpch" "core"
  run-step-backgroundable "Loading TPC-DS data" load-tpcds.log load-tpcds-data
  run-step-wait-all
  # Load tpch nested data.
  # TODO: Hacky and introduces more complexity into the system, but it is expedient.
  if [[ -n "$CM_HOST" ]]; then
    LOAD_NESTED_ARGS="--cm-host $CM_HOST"
  fi
  run-step "Loading nested parquet data" load-nested.log \
    ${IMPALA_HOME}/testdata/bin/load_nested.py \
    -t tpch_nested_parquet -f parquet/none ${LOAD_NESTED_ARGS:-}
  run-step "Loading nested orc data" load-nested.log \
    ${IMPALA_HOME}/testdata/bin/load_nested.py \
    -t tpch_nested_orc_def -f orc/def ${LOAD_NESTED_ARGS:-}
  run-step "Loading auxiliary workloads" load-aux-workloads.log load-aux-workloads
  run-step "Loading dependent tables" copy-and-load-dependent-tables.log \
      copy-and-load-dependent-tables
  run-step "Loading custom data" load-custom-data.log load-custom-data
  run-step "Creating many block table" create-table-many-blocks.log \
      ${IMPALA_HOME}/testdata/bin/create-table-many-blocks.sh -p 1234 -b 1
elif [ "${TARGET_FILESYSTEM}" = "hdfs" ];  then
  echo "Skipped loading the metadata."
  run-step "Loading HBase data only" load-hbase-only.log \
      load-data "functional-query" "core" "hbase/none"
fi

if [[ $SKIP_METADATA_LOAD -eq 1 ]]; then
  # Tests depend on the kudu data being clean, so load the data from scratch.
  # This is only necessary if this is not a full dataload, because a full dataload
  # already loads Kudu functional and TPC-H tables from scratch.
  run-step-backgroundable "Loading Kudu functional" load-kudu.log \
        load-data "functional-query" "core" "kudu/none/none" force
  run-step-backgroundable "Loading Kudu TPCH" load-kudu-tpch.log \
        load-data "tpch" "core" "kudu/none/none" force
fi
run-step-backgroundable "Loading Hive UDFs" build-and-copy-hive-udfs.log \
    build-and-copy-hive-udfs
run-step-wait-all
run-step "Running custom post-load steps" custom-post-load-steps.log \
    custom-post-load-steps

if [ "${TARGET_FILESYSTEM}" = "hdfs" ]; then
  # Caching tables in s3 returns an IllegalArgumentException, see IMPALA-1714
  run-step "Caching test tables" cache-test-tables.log cache-test-tables

  run-step "Creating internal HBase table" create-internal-hbase-table.log \
      create-internal-hbase-table

  run-step "Checking HDFS health" check-hdfs-health.log check-hdfs-health

  # Saving the list of created files can help in debugging missing files.
  run-step "Logging created files" created-files.log hdfs dfs -ls -R /test-warehouse
fi

if [[ "${TARGET_FILESYSTEM}" = "hdfs" || "${TARGET_FILESYSTEM}" = "ozone" || \
      "${TARGET_FILESYSTEM}" = "s3" ]]; then
  # TODO: Modify the .sql file that creates the table to take an alternative location into
  # account.
  run-step "Loading external data sources" load-ext-data-source.log \
      copy-and-load-ext-data-source
fi

# TODO: Investigate why all stats are not preserved. Theoretically, we only need to
# recompute stats for HBase.
run-step "Computing table stats" compute-table-stats.log \
    ${IMPALA_HOME}/testdata/bin/compute-table-stats.sh

# IMPALA-8346: this step only applies if the cluster is the local minicluster
if [[ -z "$REMOTE_LOAD" ]]; then
  run-step "Creating tpcds testcase data" create-tpcds-testcase-data.log \
      ${IMPALA_HOME}/testdata/bin/create-tpcds-testcase-files.sh
fi

if [[ $SKIP_RANGER -eq 0 ]]; then
  run-step "Setting up Ranger" setup-ranger.log \
      ${IMPALA_HOME}/testdata/bin/setup-ranger.sh
fi

# Restart the minicluster. This is strictly to provide a sanity check that
# restarting the minicluster works and doesn't impact the tests. This is a common
# operation for developers, so it is nice to test it.
restart-cluster

# Kill the spawned timeout process and its child sleep process.
# There may not be a sleep process, so ignore failure.
pkill -P $TIMEOUT_PID || true
kill $TIMEOUT_PID