| <?xml version="1.0" encoding="UTF-8"?> |
| |
| <!-- |
| Licensed to the Apache Software Foundation (ASF) under one or more |
| contributor license agreements. See the NOTICE file distributed with |
| this work for additional information regarding copyright ownership. |
| The ASF licenses this file to You under the Apache License, Version 2.0 |
| (the "License"); you may not use this file except in compliance with |
| the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| |
| <!-- |
| Ignite Spring configuration file to startup grid cache. |
| |
| When starting a standalone Ignite node, you need to execute the following command: |
| {IGNITE_HOME}/bin/ignite.{bat|sh} examples/config/example-cache.xml |
| |
| When starting Ignite from Java IDE, pass path to this file into Ignition: |
| Ignition.start("examples/config/example-cache.xml"); |
| --> |
| <beans xmlns="http://www.springframework.org/schema/beans" |
| xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" |
| xsi:schemaLocation=" |
| http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd"> |
| <!-- |
| Configuration below demonstrates how to setup caches within grid nodes. |
| --> |
| <bean id="grid.cfg" class="org.apache.ignite.configuration.IgniteConfiguration"> |
| <property name="deploymentMode" value="SHARED"/> |
| |
| <!-- |
| For better performance set this property to false in case |
| peer deployment is not used. |
| Default value is true. |
| --> |
| <property name="peerClassLoadingEnabled" value="true"/> |
| |
| |
| <!-- Set to local host address just for examples. --> |
| <property name="localHost" value="127.0.0.1"/> |
| |
| <property name="cacheConfiguration"> |
| <!-- |
| Specify list of cache configurations here. Any property from |
| CacheConfiguration interface can be configured here. |
| Note that absolutely all configuration properties are optional. |
| --> |
| <list> |
| <!-- |
| Partitioned cache example configuration (Transactional mode). |
| --> |
| <bean class="org.apache.ignite.configuration.CacheConfiguration"> |
| <property name="name" value="partitioned"/> |
| |
| <property name="cacheMode" value="PARTITIONED"/> |
| |
| <!-- Transactional updates supported. --> |
| <property name="atomicityMode" value="TRANSACTIONAL"/> |
| |
| <!-- Enable near cache to cache recently accessed data. --> |
| <property name="nearConfiguration"> |
| <bean class="org.apache.ignite.configuration.NearCacheConfiguration"/> |
| </property> |
| |
| <!-- |
| Setting this value will cause local node to wait for remote commits. |
| However, it's important to set it this way in the examples as we assert on |
| conditions that usually assume full completion of transactions on all nodes. |
| --> |
| <property name="writeSynchronizationMode" value="FULL_SYNC"/> |
| |
| <!-- |
| This shows how to configure number of backups. The below configuration |
| sets the number of backups to 1 (which is default). |
| --> |
| <property name="backups" value="1"/> |
| |
| <!-- Set synchronous rebalancing (default is asynchronous). --> |
| <property name="rebalanceMode" value="SYNC"/> |
| </bean> |
| |
| <!-- |
| Replicated cache example configuration. |
| --> |
| <bean class="org.apache.ignite.configuration.CacheConfiguration"> |
| <property name="name" value="replicated"/> |
| |
| <property name="atomicityMode" value="TRANSACTIONAL"/> |
| |
| <!-- |
| Setting this value will cause local node to wait for remote commits. |
| However, it's important to set it this way in the examples as we assert on |
| conditions that usually assume full completion of transactions on all nodes. |
| --> |
| <property name="writeSynchronizationMode" value="FULL_SYNC"/> |
| |
| <!-- REPLICATED cache mode. --> |
| <property name="cacheMode" value="REPLICATED"/> |
| |
| <!-- Set synchronous rebalancing (default is asynchronous). --> |
| <property name="rebalanceMode" value="SYNC"/> |
| </bean> |
| </list> |
| </property> |
| |
| <!-- |
| Uncomment this to provide TCP discovery SPI (Amazon EC2). |
| --> |
| <!-- |
| <property name="discoverySpi"> |
| <bean class="org.apache.ignite.spi.discovery.tcp.TcpDiscoverySpi"> |
| <property name="ipFinder"> |
| <bean class="org.apache.ignite.spi.discovery.tcp.ipfinder.s3.TcpDiscoveryS3IpFinder"> |
| <property name="awsCredentials"> |
| <bean class="com.amazonaws.auth.BasicAWSCredentials"> |
| <constructor-arg value="YOUR_ACCESS_KEY_ID" /> |
| <constructor-arg value="YOUR_SECRET_ACCESS_KEY" /> |
| </bean> |
| </property> |
| <property name="bucketName" value="YOUR_BUCKET_NAME_IP_FINDER"/> |
| </bean> |
| </property> |
| </bean> |
| </property> |
| --> |
| |
| <!-- |
| Uncomment this to provide TCP discovery SPI (Local network). |
| |
| If path to shared file system is not explicitly provided, |
| then only local nodes will be able to discover each other. |
| --> |
| <!-- |
| <property name="discoverySpi"> |
| <bean class="org.apache.ignite.spi.discovery.tcp.TcpDiscoverySpi"> |
| <property name="ipFinder"> |
| <bean class="org.apache.ignite.spi.discovery.tcp.ipfinder.sharedfs.TcpDiscoverySharedFsIpFinder"> |
| <property name="path" value="work/disco/tcp"/> |
| </bean> |
| </property> |
| </bean> |
| </property> |
| --> |
| |
| <!-- |
| TCP discovery SPI configuration with predefined addresses. |
| Use the addresses list to provide IP addresses of initial nodes in the grid |
| (at least one address must be provided). |
| |
| Note: |
| ===== |
| If running in distributed environment, you should change IP addresses to the actual IP addresses |
| of the servers on your network. Not all addresses need to be specified, only the addresses |
| of one or more servers which will always be started first. |
| --> |
| <property name="discoverySpi"> |
| <bean class="org.apache.ignite.spi.discovery.tcp.TcpDiscoverySpi"> |
| <property name="ipFinder"> |
| <bean class="org.apache.ignite.spi.discovery.tcp.ipfinder.vm.TcpDiscoveryVmIpFinder"> |
| <property name="addresses"> |
| <list> |
| <!-- |
| List all IP/port configurations that potentially |
| can be started first in examples. We are assuming |
| grid of size 10 or less. |
| --> |
| <value>127.0.0.1:47500</value> |
| <value>127.0.0.1:47501</value> |
| <value>127.0.0.1:47502</value> |
| <value>127.0.0.1:47503</value> |
| <value>127.0.0.1:47504</value> |
| <value>127.0.0.1:47505</value> |
| <value>127.0.0.1:47506</value> |
| <value>127.0.0.1:47507</value> |
| <value>127.0.0.1:47508</value> |
| <value>127.0.0.1:47509</value> |
| </list> |
| </property> |
| </bean> |
| </property> |
| </bean> |
| </property> |
| </bean> |
| </beans> |