computer/computer-k8s-operator/crd-generate/Makefile - hugegraph-computer - Git at Google

 #
 # Licensed to the Apache Software Foundation (ASF) under one or more
 # contributor license agreements.  See the NOTICE file distributed with
 # this work for additional information regarding copyright ownership.
 # The ASF licenses this file to You under the Apache License, Version 2.0
 # (the "License"); you may not use this file except in compliance with
 # the License.  You may obtain a copy of the License at
 #
 #    http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
 # Produce CRDs that work back to Kubernetes 1.20 (no version conversion)
 CRD_OPTIONS ?= "crd:trivialVersions=true,preserveUnknownFields=false,crdVersions={v1,v1beta1},maxDescLen=0"

 # Image URL to use all building/pushing image targets
 IMG ?= hugegraph/hugegraph-computer-operator-manager:latest
 # ENVTEST_K8S_VERSION refers to the version of kubebuilder assets to be downloaded by envtest binary.
 ENVTEST_K8S_VERSION = 1.20.13

 # Get the currently used golang install path (in GOPATH/bin, unless GOBIN is set)
 ifeq (,$(shell go env GOBIN))
 GOBIN=$(shell go env GOPATH)/bin
 else
 GOBIN=$(shell go env GOBIN)
 endif

 # Setting SHELL to bash allows bash commands to be executed by recipes.
 # Options are set to exit when a recipe line exits non-zero or a piped command fails.
 SHELL = /usr/bin/env bash -o pipefail
 .SHELLFLAGS = -ec

 .PHONY: all
 all: build

 ##@ General

 # The help target prints out all targets with their descriptions organized
 # beneath their categories. The categories are represented by '##@' and the
 # target descriptions by '##'. The awk commands is responsible for reading the
 # entire set of makefiles included in this invocation, looking for lines of the
 # file as xyz: ## something, and then pretty-format the target and help. Then,
 # if there's a line with ##@ something, that gets pretty-printed as a category.
 # More info on the usage of ANSI control characters for terminal formatting:
 # https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_parameters
 # More info on the awk command:
 # http://linuxcommand.org/lc3_adv_awk.php

 .PHONY: help
 help: ## Display this help.
 	@awk 'BEGIN {FS = ":.*##"; printf "\nUsage:\n  make \033[36m<target>\033[0m\n"} /^[a-zA-Z_0-9-]+:.*?##/ { printf "  \033[36m%-15s\033[0m %s\n", $$1, $$2 } /^##@/ { printf "\n\033[1m%s\033[0m\n", substr($$0, 5) } ' $(MAKEFILE_LIST)

 ##@ Development

 gen-all: gen-code manifests gen-jsonschema ## Generate code containing DeepCopy, CRD, Operator, JsonSchema

 .PHONY: gen-code
 gen-code: controller-gen ## Generate code containing DeepCopy, DeepCopyInto, and DeepCopyObject method implementations.
 	$(CONTROLLER_GEN) object paths="./..."

 .PHONY: manifests
 manifests: controller-gen #kustomize ## Generate WebhookConfiguration, ClusterRole and CustomResourceDefinition objects.
 	$(CONTROLLER_GEN) $(CRD_OPTIONS) rbac:roleName=manager-role webhook paths="./..." output:crd:artifacts:config=config/crd/bases

 	#$(KUSTOMIZE) build config/crd > ../manifest/hugegraph-computer-crd.yaml
 	cp config/crd/bases/operator.hugegraph.apache.org_hugegraphcomputerjobs.yaml ../manifest/hugegraph-computer-crd.v1.yaml
 	cp config/crd/bases/operator.hugegraph.apache.org_hugegraphcomputerjobs.v1beta1.yaml ../manifest/hugegraph-computer-crd.v1beta1.yaml
 	$(KUSTOMIZE) build config/default > ../manifest/hugegraph-computer-operator.yaml
 	rm -rf config/crd/bases

 .PHONY: gen-jsonschema
 gen-jsonschema: ## Generate JsonSchema for java
 	go run cmd/generate.go

 .PHONY: generate
 generate: controller-gen ## Generate code containing DeepCopy, DeepCopyInto, and DeepCopyObject method implementations.
 	$(CONTROLLER_GEN) object:headerFile="hack/boilerplate.go.txt" paths="./..."

 .PHONY: fmt
 fmt: ## Run go fmt against code.
 	go fmt ./...

 .PHONY: vet
 vet: ## Run go vet against code.
 	go vet ./...

 .PHONY: test
 test: manifests generate fmt vet envtest ## Run tests.
 	KUBEBUILDER_ASSETS="$(shell $(ENVTEST) use $(ENVTEST_K8S_VERSION) --bin-dir $(LOCALBIN) -p path)" go test ./... -coverprofile cover.out

 ##@ Build

 .PHONY: build
 build: manifests generate fmt vet ## Build manager binary.
 	go build -o bin/manager cmd/main.go

 .PHONY: run
 run: manifests generate fmt vet ## Run a controller from your host.
 	go run ./cmd/main.go

 # If you wish built the manager image targeting other platforms you can use the --platform flag.
 # (i.e. docker build --platform linux/arm64 ). However, you must enable docker buildKit for it.
 # More info: https://docs.docker.com/develop/develop-images/build_enhancements/
 .PHONY: docker-build
 docker-build: ## Build docker image with the manager.
 	docker build -t ${IMG} .

 .PHONY: docker-push
 docker-push: ## Push docker image with the manager.
 	docker push ${IMG}

 # PLATFORMS defines the target platforms for the manager image be build to provide support to multiple
 # architectures. (i.e. make docker-buildx IMG=myregistry/mypoperator:0.0.1). To use this option you need to:
 # - able to use docker buildx . More info: https://docs.docker.com/build/buildx/
 # - have enable BuildKit, More info: https://docs.docker.com/develop/develop-images/build_enhancements/
 # - be able to push the image for your registry (i.e. if you do not inform a valid value via IMG=<myregistry/image:<tag>> then the export will fail)
 # To properly provided solutions that supports more than one platform you should use this option.
 PLATFORMS ?= linux/arm64,linux/amd64,linux/s390x,linux/ppc64le
 .PHONY: docker-buildx
 docker-buildx: test ## Build and push docker image for the manager for cross-platform support
 	# copy existing Dockerfile and insert --platform=${BUILDPLATFORM} into Dockerfile.cross, and preserve the original Dockerfile
 	sed -e '1 s/\(^FROM\)/FROM --platform=\$$\{BUILDPLATFORM\}/; t' -e ' 1,// s//FROM --platform=\$$\{BUILDPLATFORM\}/' Dockerfile > Dockerfile.cross
 	- docker buildx create --name project-v3-builder
 	docker buildx use project-v3-builder
 	- docker buildx build --push --platform=$(PLATFORMS) --tag ${IMG} -f Dockerfile.cross .
 	- docker buildx rm project-v3-builder
 	rm Dockerfile.cross

 ##@ Deployment

 ifndef ignore-not-found
   ignore-not-found = false
 endif

 .PHONY: install
 install: manifests kustomize ## Install CRDs into the K8s cluster specified in ~/.kube/config.
 	$(KUSTOMIZE) build config/crd | kubectl apply -f -

 .PHONY: uninstall
 uninstall: manifests kustomize ## Uninstall CRDs from the K8s cluster specified in ~/.kube/config. Call with ignore-not-found=true to ignore resource not found errors during deletion.
 	$(KUSTOMIZE) build config/crd | kubectl delete --ignore-not-found=$(ignore-not-found) -f -

 .PHONY: deploy
 deploy: manifests kustomize ## Deploy controller to the K8s cluster specified in ~/.kube/config.
 	cd config/manager && $(KUSTOMIZE) edit set image controller=${IMG}
 	$(KUSTOMIZE) build config/default | kubectl apply -f -

 .PHONY: undeploy
 undeploy: ## Undeploy controller from the K8s cluster specified in ~/.kube/config. Call with ignore-not-found=true to ignore resource not found errors during deletion.
 	$(KUSTOMIZE) build config/default | kubectl delete --ignore-not-found=$(ignore-not-found) -f -

 ##@ Build Dependencies

 ## Location to install dependencies to
 LOCALBIN ?= $(shell pwd)/bin
 $(LOCALBIN):
 	mkdir -p $(LOCALBIN)

 ## Tool Binaries
 KUSTOMIZE ?= $(LOCALBIN)/kustomize
 CONTROLLER_GEN ?= $(LOCALBIN)/controller-gen

 ## Tool Versions
 KUSTOMIZE_VERSION ?= v3.8.7
 CONTROLLER_TOOLS_VERSION ?= v0.5.0

 KUSTOMIZE_INSTALL_SCRIPT ?= "https://raw.githubusercontent.com/kubernetes-sigs/kustomize/master/hack/install_kustomize.sh"
 .PHONY: kustomize
 kustomize: $(KUSTOMIZE) ## Download kustomize locally if necessary. If wrong version is installed, it will be removed before downloading.
 $(KUSTOMIZE): $(LOCALBIN)
 	@if test -x $(LOCALBIN)/kustomize && ! $(LOCALBIN)/kustomize version | grep -q $(KUSTOMIZE_VERSION); then \
 		echo "$(LOCALBIN)/kustomize version is not expected $(KUSTOMIZE_VERSION). Removing it before installing."; \
 		rm -rf $(LOCALBIN)/kustomize; \
 	fi
 	test -s $(LOCALBIN)/kustomize || { curl -Ss $(KUSTOMIZE_INSTALL_SCRIPT) --output install_kustomize.sh && bash install_kustomize.sh $(subst v,,$(KUSTOMIZE_VERSION)) $(LOCALBIN); rm install_kustomize.sh; }

 .PHONY: controller-gen
 controller-gen: $(CONTROLLER_GEN) ## Download controller-gen locally if necessary. If wrong version is installed, it will be overwritten.
 $(CONTROLLER_GEN): $(LOCALBIN)
 	test -s $(LOCALBIN)/controller-gen && $(LOCALBIN)/controller-gen --version | grep -q $(CONTROLLER_TOOLS_VERSION) || \
 	GOBIN=$(LOCALBIN) go install sigs.k8s.io/controller-tools/cmd/controller-gen@$(CONTROLLER_TOOLS_VERSION)
	#
	# Licensed to the Apache Software Foundation (ASF) under one or more
	# contributor license agreements. See the NOTICE file distributed with
	# this work for additional information regarding copyright ownership.
	# The ASF licenses this file to You under the Apache License, Version 2.0
	# (the "License"); you may not use this file except in compliance with
	# the License. You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#
	# Produce CRDs that work back to Kubernetes 1.20 (no version conversion)
	CRD_OPTIONS ?= "crd:trivialVersions=true,preserveUnknownFields=false,crdVersions={v1,v1beta1},maxDescLen=0"

	# Image URL to use all building/pushing image targets
	IMG ?= hugegraph/hugegraph-computer-operator-manager:latest
	# ENVTEST_K8S_VERSION refers to the version of kubebuilder assets to be downloaded by envtest binary.
	ENVTEST_K8S_VERSION = 1.20.13

	# Get the currently used golang install path (in GOPATH/bin, unless GOBIN is set)
	ifeq (,$(shell go env GOBIN))
	GOBIN=$(shell go env GOPATH)/bin
	else
	GOBIN=$(shell go env GOBIN)
	endif

	# Setting SHELL to bash allows bash commands to be executed by recipes.
	# Options are set to exit when a recipe line exits non-zero or a piped command fails.
	SHELL = /usr/bin/env bash -o pipefail
	.SHELLFLAGS = -ec

	.PHONY: all
	all: build

	##@ General

	# The help target prints out all targets with their descriptions organized
	# beneath their categories. The categories are represented by '##@' and the
	# target descriptions by '##'. The awk commands is responsible for reading the
	# entire set of makefiles included in this invocation, looking for lines of the
	# file as xyz: ## something, and then pretty-format the target and help. Then,
	# if there's a line with ##@ something, that gets pretty-printed as a category.
	# More info on the usage of ANSI control characters for terminal formatting:
	# https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_parameters
	# More info on the awk command:
	# http://linuxcommand.org/lc3_adv_awk.php

	.PHONY: help
	help: ## Display this help.
	@awk 'BEGIN {FS = ":.##"; printf "\nUsage:\n make \033[36m<target>\033[0m\n"} /^[a-zA-Z_0-9-]+:.?##/ { printf " \033[36m%-15s\033[0m %s\n", $$1, $$2 } /^##@/ { printf "\n\033[1m%s\033[0m\n", substr($$0, 5) } ' $(MAKEFILE_LIST)

	##@ Development

	gen-all: gen-code manifests gen-jsonschema ## Generate code containing DeepCopy, CRD, Operator, JsonSchema

	.PHONY: gen-code
	gen-code: controller-gen ## Generate code containing DeepCopy, DeepCopyInto, and DeepCopyObject method implementations.
	$(CONTROLLER_GEN) object paths="./..."

	.PHONY: manifests
	manifests: controller-gen #kustomize ## Generate WebhookConfiguration, ClusterRole and CustomResourceDefinition objects.
	$(CONTROLLER_GEN) $(CRD_OPTIONS) rbac:roleName=manager-role webhook paths="./..." output:crd:artifacts:config=config/crd/bases

	#$(KUSTOMIZE) build config/crd > ../manifest/hugegraph-computer-crd.yaml
	cp config/crd/bases/operator.hugegraph.apache.org_hugegraphcomputerjobs.yaml ../manifest/hugegraph-computer-crd.v1.yaml
	cp config/crd/bases/operator.hugegraph.apache.org_hugegraphcomputerjobs.v1beta1.yaml ../manifest/hugegraph-computer-crd.v1beta1.yaml
	$(KUSTOMIZE) build config/default > ../manifest/hugegraph-computer-operator.yaml
	rm -rf config/crd/bases

	.PHONY: gen-jsonschema
	gen-jsonschema: ## Generate JsonSchema for java
	go run cmd/generate.go

	.PHONY: generate
	generate: controller-gen ## Generate code containing DeepCopy, DeepCopyInto, and DeepCopyObject method implementations.
	$(CONTROLLER_GEN) object:headerFile="hack/boilerplate.go.txt" paths="./..."

	.PHONY: fmt
	fmt: ## Run go fmt against code.
	go fmt ./...

	.PHONY: vet
	vet: ## Run go vet against code.
	go vet ./...

	.PHONY: test
	test: manifests generate fmt vet envtest ## Run tests.
	KUBEBUILDER_ASSETS="$(shell $(ENVTEST) use $(ENVTEST_K8S_VERSION) --bin-dir $(LOCALBIN) -p path)" go test ./... -coverprofile cover.out

	##@ Build

	.PHONY: build
	build: manifests generate fmt vet ## Build manager binary.
	go build -o bin/manager cmd/main.go

	.PHONY: run
	run: manifests generate fmt vet ## Run a controller from your host.
	go run ./cmd/main.go

	# If you wish built the manager image targeting other platforms you can use the --platform flag.
	# (i.e. docker build --platform linux/arm64 ). However, you must enable docker buildKit for it.
	# More info: https://docs.docker.com/develop/develop-images/build_enhancements/
	.PHONY: docker-build
	docker-build: ## Build docker image with the manager.
	docker build -t ${IMG} .

	.PHONY: docker-push
	docker-push: ## Push docker image with the manager.
	docker push ${IMG}

	# PLATFORMS defines the target platforms for the manager image be build to provide support to multiple
	# architectures. (i.e. make docker-buildx IMG=myregistry/mypoperator:0.0.1). To use this option you need to:
	# - able to use docker buildx . More info: https://docs.docker.com/build/buildx/
	# - have enable BuildKit, More info: https://docs.docker.com/develop/develop-images/build_enhancements/
	# - be able to push the image for your registry (i.e. if you do not inform a valid value via IMG=<myregistry/image:<tag>> then the export will fail)
	# To properly provided solutions that supports more than one platform you should use this option.
	PLATFORMS ?= linux/arm64,linux/amd64,linux/s390x,linux/ppc64le
	.PHONY: docker-buildx
	docker-buildx: test ## Build and push docker image for the manager for cross-platform support
	# copy existing Dockerfile and insert --platform=${BUILDPLATFORM} into Dockerfile.cross, and preserve the original Dockerfile
	sed -e '1 s/\(^FROM\)/FROM --platform=\$$\{BUILDPLATFORM\}/; t' -e ' 1,// s//FROM --platform=\$$\{BUILDPLATFORM\}/' Dockerfile > Dockerfile.cross
	- docker buildx create --name project-v3-builder
	docker buildx use project-v3-builder
	- docker buildx build --push --platform=$(PLATFORMS) --tag ${IMG} -f Dockerfile.cross .
	- docker buildx rm project-v3-builder
	rm Dockerfile.cross

	##@ Deployment

	ifndef ignore-not-found
	ignore-not-found = false
	endif

	.PHONY: install
	install: manifests kustomize ## Install CRDs into the K8s cluster specified in ~/.kube/config.
	$(KUSTOMIZE) build config/crd \| kubectl apply -f -

	.PHONY: uninstall
	uninstall: manifests kustomize ## Uninstall CRDs from the K8s cluster specified in ~/.kube/config. Call with ignore-not-found=true to ignore resource not found errors during deletion.
	$(KUSTOMIZE) build config/crd \| kubectl delete --ignore-not-found=$(ignore-not-found) -f -

	.PHONY: deploy
	deploy: manifests kustomize ## Deploy controller to the K8s cluster specified in ~/.kube/config.
	cd config/manager && $(KUSTOMIZE) edit set image controller=${IMG}
	$(KUSTOMIZE) build config/default \| kubectl apply -f -

	.PHONY: undeploy
	undeploy: ## Undeploy controller from the K8s cluster specified in ~/.kube/config. Call with ignore-not-found=true to ignore resource not found errors during deletion.
	$(KUSTOMIZE) build config/default \| kubectl delete --ignore-not-found=$(ignore-not-found) -f -

	##@ Build Dependencies

	## Location to install dependencies to
	LOCALBIN ?= $(shell pwd)/bin
	$(LOCALBIN):
	mkdir -p $(LOCALBIN)

	## Tool Binaries
	KUSTOMIZE ?= $(LOCALBIN)/kustomize
	CONTROLLER_GEN ?= $(LOCALBIN)/controller-gen

	## Tool Versions
	KUSTOMIZE_VERSION ?= v3.8.7
	CONTROLLER_TOOLS_VERSION ?= v0.5.0

	KUSTOMIZE_INSTALL_SCRIPT ?= "https://raw.githubusercontent.com/kubernetes-sigs/kustomize/master/hack/install_kustomize.sh"
	.PHONY: kustomize
	kustomize: $(KUSTOMIZE) ## Download kustomize locally if necessary. If wrong version is installed, it will be removed before downloading.
	$(KUSTOMIZE): $(LOCALBIN)
	@if test -x $(LOCALBIN)/kustomize && ! $(LOCALBIN)/kustomize version \| grep -q $(KUSTOMIZE_VERSION); then \
	echo "$(LOCALBIN)/kustomize version is not expected $(KUSTOMIZE_VERSION). Removing it before installing."; \
	rm -rf $(LOCALBIN)/kustomize; \
	fi
	test -s $(LOCALBIN)/kustomize \|\| { curl -Ss $(KUSTOMIZE_INSTALL_SCRIPT) --output install_kustomize.sh && bash install_kustomize.sh $(subst v,,$(KUSTOMIZE_VERSION)) $(LOCALBIN); rm install_kustomize.sh; }

	.PHONY: controller-gen
	controller-gen: $(CONTROLLER_GEN) ## Download controller-gen locally if necessary. If wrong version is installed, it will be overwritten.
	$(CONTROLLER_GEN): $(LOCALBIN)
	test -s $(LOCALBIN)/controller-gen && $(LOCALBIN)/controller-gen --version \| grep -q $(CONTROLLER_TOOLS_VERSION) \|\| \
	GOBIN=$(LOCALBIN) go install sigs.k8s.io/controller-tools/cmd/controller-gen@$(CONTROLLER_TOOLS_VERSION)