| /* Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "apr_network_io.h" |
| #include "apr_strings.h" |
| |
| #define APR_WANT_STRFUNC |
| #include "apr_want.h" |
| |
| #include "ap_config.h" |
| #include "httpd.h" |
| #include "http_main.h" |
| #include "http_config.h" |
| #include "http_core.h" |
| #include "ap_listen.h" |
| #include "http_log.h" |
| #include "mpm_common.h" |
| |
| #include <stdlib.h> |
| #if APR_HAVE_UNISTD_H |
| #include <unistd.h> |
| #endif |
| |
| /* we know core's module_index is 0 */ |
| #undef APLOG_MODULE_INDEX |
| #define APLOG_MODULE_INDEX AP_CORE_MODULE_INDEX |
| |
| AP_DECLARE_DATA ap_listen_rec *ap_listeners = NULL; |
| |
| /* Let ap_num_listen_buckets be global so that it can |
| * be printed by ap_log_mpm_common(), but keep the listeners |
| * buckets static since it is used only here to close them |
| * all (including duplicated) with ap_close_listeners(). |
| */ |
| AP_DECLARE_DATA int ap_num_listen_buckets; |
| static ap_listen_rec **ap_listen_buckets; |
| |
| /* Determine once, at runtime, whether or not SO_REUSEPORT |
| * is usable on this platform, and hence whether or not |
| * listeners can be duplicated (if configured). |
| */ |
| AP_DECLARE_DATA int ap_have_so_reuseport = -1; |
| |
| static ap_listen_rec *old_listeners; |
| static int ap_listenbacklog; |
| static int ap_listencbratio; |
| static int send_buffer_size; |
| static int receive_buffer_size; |
| |
| /* TODO: make_sock is just begging and screaming for APR abstraction */ |
| static apr_status_t make_sock(apr_pool_t *p, ap_listen_rec *server) |
| { |
| apr_socket_t *s = server->sd; |
| int one = 1; |
| #if APR_HAVE_IPV6 |
| #ifdef AP_ENABLE_V4_MAPPED |
| int v6only_setting = 0; |
| #else |
| int v6only_setting = 1; |
| #endif |
| #endif |
| apr_status_t stat; |
| |
| #ifndef WIN32 |
| stat = apr_socket_opt_set(s, APR_SO_REUSEADDR, one); |
| if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) { |
| ap_log_perror(APLOG_MARK, APLOG_CRIT, stat, p, APLOGNO(00067) |
| "make_sock: for address %pI, apr_socket_opt_set: (SO_REUSEADDR)", |
| server->bind_addr); |
| apr_socket_close(s); |
| return stat; |
| } |
| #endif |
| |
| stat = apr_socket_opt_set(s, APR_SO_KEEPALIVE, one); |
| if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) { |
| ap_log_perror(APLOG_MARK, APLOG_CRIT, stat, p, APLOGNO(00068) |
| "make_sock: for address %pI, apr_socket_opt_set: (SO_KEEPALIVE)", |
| server->bind_addr); |
| apr_socket_close(s); |
| return stat; |
| } |
| |
| #if APR_HAVE_IPV6 |
| if (server->bind_addr->family == APR_INET6) { |
| stat = apr_socket_opt_set(s, APR_IPV6_V6ONLY, v6only_setting); |
| if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) { |
| ap_log_perror(APLOG_MARK, APLOG_CRIT, stat, p, APLOGNO(00069) |
| "make_sock: for address %pI, apr_socket_opt_set: " |
| "(IPV6_V6ONLY)", |
| server->bind_addr); |
| apr_socket_close(s); |
| return stat; |
| } |
| } |
| #endif |
| |
| /* |
| * To send data over high bandwidth-delay connections at full |
| * speed we must force the TCP window to open wide enough to keep the |
| * pipe full. The default window size on many systems |
| * is only 4kB. Cross-country WAN connections of 100ms |
| * at 1Mb/s are not impossible for well connected sites. |
| * If we assume 100ms cross-country latency, |
| * a 4kB buffer limits throughput to 40kB/s. |
| * |
| * To avoid this problem I've added the SendBufferSize directive |
| * to allow the web master to configure send buffer size. |
| * |
| * The trade-off of larger buffers is that more kernel memory |
| * is consumed. YMMV, know your customers and your network! |
| * |
| * -John Heidemann <johnh@isi.edu> 25-Oct-96 |
| * |
| * If no size is specified, use the kernel default. |
| */ |
| if (send_buffer_size) { |
| stat = apr_socket_opt_set(s, APR_SO_SNDBUF, send_buffer_size); |
| if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) { |
| ap_log_perror(APLOG_MARK, APLOG_WARNING, stat, p, APLOGNO(00070) |
| "make_sock: failed to set SendBufferSize for " |
| "address %pI, using default", |
| server->bind_addr); |
| /* not a fatal error */ |
| } |
| } |
| if (receive_buffer_size) { |
| stat = apr_socket_opt_set(s, APR_SO_RCVBUF, receive_buffer_size); |
| if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) { |
| ap_log_perror(APLOG_MARK, APLOG_WARNING, stat, p, APLOGNO(00071) |
| "make_sock: failed to set ReceiveBufferSize for " |
| "address %pI, using default", |
| server->bind_addr); |
| /* not a fatal error */ |
| } |
| } |
| |
| #if APR_TCP_NODELAY_INHERITED |
| ap_sock_disable_nagle(s); |
| #endif |
| |
| #if defined(SO_REUSEPORT) |
| if (ap_have_so_reuseport && ap_listencbratio > 0) { |
| int thesock; |
| apr_os_sock_get(&thesock, s); |
| if (setsockopt(thesock, SOL_SOCKET, SO_REUSEPORT, |
| (void *)&one, sizeof(int)) < 0) { |
| stat = apr_get_netos_error(); |
| ap_log_perror(APLOG_MARK, APLOG_CRIT, stat, p, APLOGNO(02638) |
| "make_sock: for address %pI, apr_socket_opt_set: " |
| "(SO_REUSEPORT)", |
| server->bind_addr); |
| apr_socket_close(s); |
| return stat; |
| } |
| } |
| #endif |
| |
| if ((stat = apr_socket_bind(s, server->bind_addr)) != APR_SUCCESS) { |
| ap_log_perror(APLOG_MARK, APLOG_STARTUP|APLOG_CRIT, stat, p, APLOGNO(00072) |
| "make_sock: could not bind to address %pI", |
| server->bind_addr); |
| apr_socket_close(s); |
| return stat; |
| } |
| |
| if ((stat = apr_socket_listen(s, ap_listenbacklog)) != APR_SUCCESS) { |
| ap_log_perror(APLOG_MARK, APLOG_STARTUP|APLOG_ERR, stat, p, APLOGNO(00073) |
| "make_sock: unable to listen for connections " |
| "on address %pI", |
| server->bind_addr); |
| apr_socket_close(s); |
| return stat; |
| } |
| |
| #ifdef WIN32 |
| /* I seriously doubt that this would work on Unix; I have doubts that |
| * it entirely solves the problem on Win32. However, since setting |
| * reuseaddr on the listener -prior- to binding the socket has allowed |
| * us to attach to the same port as an already running instance of |
| * Apache, or even another web server, we cannot identify that this |
| * port was exclusively granted to this instance of Apache. |
| * |
| * So set reuseaddr, but do not attempt to do so until we have the |
| * parent listeners successfully bound. |
| */ |
| stat = apr_socket_opt_set(s, APR_SO_REUSEADDR, one); |
| if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) { |
| ap_log_perror(APLOG_MARK, APLOG_CRIT, stat, p, APLOGNO(00074) |
| "make_sock: for address %pI, apr_socket_opt_set: (SO_REUSEADDR)", |
| server->bind_addr); |
| apr_socket_close(s); |
| return stat; |
| } |
| #endif |
| |
| server->sd = s; |
| server->active = 1; |
| |
| server->accept_func = NULL; |
| |
| return APR_SUCCESS; |
| } |
| |
| static const char* find_accf_name(server_rec *s, const char *proto) |
| { |
| const char* accf; |
| core_server_config *conf = ap_get_core_module_config(s->module_config); |
| if (!proto) { |
| return NULL; |
| } |
| |
| accf = apr_table_get(conf->accf_map, proto); |
| |
| if (accf && !strcmp("none", accf)) { |
| return NULL; |
| } |
| |
| return accf; |
| } |
| |
| static void ap_apply_accept_filter(apr_pool_t *p, ap_listen_rec *lis, |
| server_rec *server) |
| { |
| apr_socket_t *s = lis->sd; |
| const char *accf; |
| apr_status_t rv; |
| const char *proto; |
| |
| proto = lis->protocol; |
| |
| if (!proto) { |
| proto = ap_get_server_protocol(server); |
| } |
| |
| |
| accf = find_accf_name(server, proto); |
| |
| if (accf) { |
| #if APR_HAS_SO_ACCEPTFILTER |
| /* In APR 1.x, the 2nd and 3rd parameters are char * instead of |
| * const char *, so make a copy of those args here. |
| */ |
| rv = apr_socket_accept_filter(s, apr_pstrdup(p, accf), |
| apr_pstrdup(p, "")); |
| if (rv != APR_SUCCESS && !APR_STATUS_IS_ENOTIMPL(rv)) { |
| ap_log_perror(APLOG_MARK, APLOG_WARNING, rv, p, APLOGNO(00075) |
| "Failed to enable the '%s' Accept Filter", |
| accf); |
| } |
| #else |
| rv = apr_socket_opt_set(s, APR_TCP_DEFER_ACCEPT, 30); |
| if (rv != APR_SUCCESS && !APR_STATUS_IS_ENOTIMPL(rv)) { |
| ap_log_perror(APLOG_MARK, APLOG_WARNING, rv, p, APLOGNO(00076) |
| "Failed to enable APR_TCP_DEFER_ACCEPT"); |
| } |
| #endif |
| } |
| } |
| |
| static apr_status_t close_listeners_on_exec(void *v) |
| { |
| ap_close_listeners(); |
| return APR_SUCCESS; |
| } |
| |
| static int find_listeners(ap_listen_rec **from, ap_listen_rec **to, |
| const char *addr, apr_port_t port) |
| { |
| int found = 0; |
| |
| while (*from) { |
| apr_sockaddr_t *sa = (*from)->bind_addr; |
| |
| /* Some listeners are not real so they will not have a bind_addr. */ |
| if (sa) { |
| ap_listen_rec *new; |
| apr_port_t oldport; |
| |
| oldport = sa->port; |
| /* If both ports are equivalent, then if their names are equivalent, |
| * then we will re-use the existing record. |
| */ |
| if (port == oldport && |
| ((!addr && !sa->hostname) || |
| ((addr && sa->hostname) && !strcmp(sa->hostname, addr)))) { |
| found = 1; |
| if (!to) { |
| break; |
| } |
| new = *from; |
| *from = new->next; |
| new->next = *to; |
| *to = new; |
| continue; |
| } |
| } |
| |
| from = &(*from)->next; |
| } |
| |
| return found; |
| } |
| |
| static const char *alloc_listener(process_rec *process, const char *addr, |
| apr_port_t port, const char* proto, |
| void *slave) |
| { |
| ap_listen_rec *last; |
| apr_status_t status; |
| apr_sockaddr_t *sa; |
| |
| /* see if we've got a listener for this address:port, which is an error */ |
| if (find_listeners(&ap_listeners, NULL, addr, port)) { |
| return "Cannot define multiple Listeners on the same IP:port"; |
| } |
| |
| /* see if we've got an old listener for this address:port */ |
| if (find_listeners(&old_listeners, &ap_listeners, addr, port)) { |
| if (ap_listeners->slave != slave) { |
| return "Cannot define a slave on the same IP:port as a Listener"; |
| } |
| return NULL; |
| } |
| |
| if ((status = apr_sockaddr_info_get(&sa, addr, APR_UNSPEC, port, 0, |
| process->pool)) |
| != APR_SUCCESS) { |
| ap_log_perror(APLOG_MARK, APLOG_CRIT, status, process->pool, APLOGNO(00077) |
| "alloc_listener: failed to set up sockaddr for %s", |
| addr); |
| return "Listen setup failed"; |
| } |
| |
| /* Initialize to our last configured ap_listener. */ |
| last = ap_listeners; |
| while (last && last->next) { |
| last = last->next; |
| } |
| |
| while (sa) { |
| ap_listen_rec *new; |
| |
| /* this has to survive restarts */ |
| new = apr_palloc(process->pool, sizeof(ap_listen_rec)); |
| new->active = 0; |
| new->next = 0; |
| new->bind_addr = sa; |
| new->protocol = apr_pstrdup(process->pool, proto); |
| |
| /* Go to the next sockaddr. */ |
| sa = sa->next; |
| |
| status = apr_socket_create(&new->sd, new->bind_addr->family, |
| SOCK_STREAM, 0, process->pool); |
| |
| #if APR_HAVE_IPV6 |
| /* What could happen is that we got an IPv6 address, but this system |
| * doesn't actually support IPv6. Try the next address. |
| */ |
| if (status != APR_SUCCESS && !addr && |
| new->bind_addr->family == APR_INET6) { |
| continue; |
| } |
| #endif |
| if (status != APR_SUCCESS) { |
| ap_log_perror(APLOG_MARK, APLOG_CRIT, status, process->pool, APLOGNO(00078) |
| "alloc_listener: failed to get a socket for %s", |
| addr); |
| return "Listen setup failed"; |
| } |
| |
| /* We need to preserve the order returned by getaddrinfo() */ |
| if (last == NULL) { |
| ap_listeners = last = new; |
| } else { |
| last->next = new; |
| last = new; |
| } |
| new->slave = slave; |
| } |
| |
| return NULL; |
| } |
| /* Evaluates to true if the (apr_sockaddr_t *) addr argument is the |
| * IPv4 match-any-address, 0.0.0.0. */ |
| #define IS_INADDR_ANY(addr) ((addr)->family == APR_INET \ |
| && (addr)->sa.sin.sin_addr.s_addr == INADDR_ANY) |
| |
| /* Evaluates to true if the (apr_sockaddr_t *) addr argument is the |
| * IPv6 match-any-address, [::]. */ |
| #define IS_IN6ADDR_ANY(addr) ((addr)->family == APR_INET6 \ |
| && IN6_IS_ADDR_UNSPECIFIED(&(addr)->sa.sin6.sin6_addr)) |
| |
| /** |
| * Create, open, listen, and bind all sockets. |
| * @param process The process record for the currently running server |
| * @return The number of open sockets |
| */ |
| static int open_listeners(apr_pool_t *pool) |
| { |
| ap_listen_rec *lr; |
| ap_listen_rec *next; |
| ap_listen_rec *previous; |
| int num_open; |
| const char *userdata_key = "ap_open_listeners"; |
| void *data; |
| #if AP_NONBLOCK_WHEN_MULTI_LISTEN |
| int use_nonblock; |
| #endif |
| |
| /* Don't allocate a default listener. If we need to listen to a |
| * port, then the user needs to have a Listen directive in their |
| * config file. |
| */ |
| num_open = 0; |
| previous = NULL; |
| for (lr = ap_listeners; lr; previous = lr, lr = lr->next) { |
| if (lr->active) { |
| ++num_open; |
| } |
| else { |
| #if APR_HAVE_IPV6 |
| ap_listen_rec *cur; |
| int v6only_setting; |
| int skip = 0; |
| |
| /* If we have the unspecified IPv4 address (0.0.0.0) and |
| * the unspecified IPv6 address (::) is next, we need to |
| * swap the order of these in the list. We always try to |
| * bind to IPv6 first, then IPv4, since an IPv6 socket |
| * might be able to receive IPv4 packets if V6ONLY is not |
| * enabled, but never the other way around. |
| * Note: In some configurations, the unspecified IPv6 address |
| * could be even later in the list. This logic only corrects |
| * the situation where it is next in the list, such as when |
| * apr_sockaddr_info_get() returns an IPv4 and an IPv6 address, |
| * in that order. |
| */ |
| if (lr->next != NULL |
| && IS_INADDR_ANY(lr->bind_addr) |
| && lr->bind_addr->port == lr->next->bind_addr->port |
| && IS_IN6ADDR_ANY(lr->next->bind_addr)) { |
| /* Exchange lr and lr->next */ |
| next = lr->next; |
| lr->next = next->next; |
| next->next = lr; |
| if (previous) { |
| previous->next = next; |
| } |
| else { |
| ap_listeners = next; |
| } |
| lr = next; |
| } |
| |
| /* If we are trying to bind to 0.0.0.0 and a previous listener |
| * was :: on the same port and in turn that socket does not have |
| * the IPV6_V6ONLY flag set; we must skip the current attempt to |
| * listen (which would generate an error). IPv4 will be handled |
| * on the established IPv6 socket. |
| */ |
| if (IS_INADDR_ANY(lr->bind_addr) && previous) { |
| for (cur = ap_listeners; cur != lr; cur = cur->next) { |
| if (lr->bind_addr->port == cur->bind_addr->port |
| && IS_IN6ADDR_ANY(cur->bind_addr) |
| && apr_socket_opt_get(cur->sd, APR_IPV6_V6ONLY, |
| &v6only_setting) == APR_SUCCESS |
| && v6only_setting == 0) { |
| |
| /* Remove the current listener from the list */ |
| previous->next = lr->next; |
| lr = previous; /* maintain current value of previous after |
| * post-loop expression is evaluated |
| */ |
| skip = 1; |
| break; |
| } |
| } |
| if (skip) { |
| continue; |
| } |
| } |
| #endif |
| if (make_sock(pool, lr) == APR_SUCCESS) { |
| ++num_open; |
| } |
| else { |
| #if APR_HAVE_IPV6 |
| /* If we tried to bind to ::, and the next listener is |
| * on 0.0.0.0 with the same port, don't give a fatal |
| * error. The user will still get a warning from make_sock |
| * though. |
| */ |
| if (lr->next != NULL |
| && IS_IN6ADDR_ANY(lr->bind_addr) |
| && lr->bind_addr->port == lr->next->bind_addr->port |
| && IS_INADDR_ANY(lr->next->bind_addr)) { |
| |
| /* Remove the current listener from the list */ |
| if (previous) { |
| previous->next = lr->next; |
| } |
| else { |
| ap_listeners = lr->next; |
| } |
| |
| /* Although we've removed ourselves from the list, |
| * we need to make sure that the next iteration won't |
| * consider "previous" a working IPv6 '::' socket. |
| * Changing the family is enough to make sure the |
| * conditions before make_sock() fail. |
| */ |
| lr->bind_addr->family = AF_INET; |
| |
| continue; |
| } |
| #endif |
| /* fatal error */ |
| return -1; |
| } |
| } |
| } |
| |
| /* close the old listeners */ |
| ap_close_listeners_ex(old_listeners); |
| old_listeners = NULL; |
| |
| #if AP_NONBLOCK_WHEN_MULTI_LISTEN |
| /* if multiple listening sockets, make them non-blocking so that |
| * if select()/poll() reports readability for a reset connection that |
| * is already forgotten about by the time we call accept, we won't |
| * be hung until another connection arrives on that port |
| */ |
| use_nonblock = (ap_listeners && ap_listeners->next); |
| for (lr = ap_listeners; lr; lr = lr->next) { |
| apr_status_t status; |
| |
| status = apr_socket_opt_set(lr->sd, APR_SO_NONBLOCK, use_nonblock); |
| if (status != APR_SUCCESS) { |
| ap_log_perror(APLOG_MARK, APLOG_STARTUP|APLOG_ERR, status, pool, APLOGNO(00079) |
| "unable to control socket non-blocking status"); |
| return -1; |
| } |
| } |
| #endif /* AP_NONBLOCK_WHEN_MULTI_LISTEN */ |
| |
| /* we come through here on both passes of the open logs phase |
| * only register the cleanup once... otherwise we try to close |
| * listening sockets twice when cleaning up prior to exec |
| */ |
| apr_pool_userdata_get(&data, userdata_key, pool); |
| if (!data) { |
| apr_pool_userdata_set((const void *)1, userdata_key, |
| apr_pool_cleanup_null, pool); |
| apr_pool_cleanup_register(pool, NULL, apr_pool_cleanup_null, |
| close_listeners_on_exec); |
| } |
| |
| return num_open ? 0 : -1; |
| } |
| |
| AP_DECLARE(int) ap_setup_listeners(server_rec *s) |
| { |
| server_rec *ls; |
| server_addr_rec *addr; |
| ap_listen_rec *lr; |
| int num_listeners = 0; |
| const char* proto; |
| int found; |
| |
| for (ls = s; ls; ls = ls->next) { |
| proto = ap_get_server_protocol(ls); |
| if (!proto) { |
| found = 0; |
| /* No protocol was set for this vhost, |
| * use the default for this listener. |
| */ |
| for (addr = ls->addrs; addr && !found; addr = addr->next) { |
| for (lr = ap_listeners; lr; lr = lr->next) { |
| if (apr_sockaddr_equal(lr->bind_addr, addr->host_addr) && |
| lr->bind_addr->port == addr->host_port) { |
| ap_set_server_protocol(ls, lr->protocol); |
| found = 1; |
| break; |
| } |
| } |
| } |
| |
| if (!found) { |
| /* TODO: set protocol defaults per-Port, eg 25=smtp */ |
| ap_set_server_protocol(ls, "http"); |
| } |
| } |
| } |
| |
| if (open_listeners(s->process->pool)) { |
| return 0; |
| } |
| |
| for (lr = ap_listeners; lr; lr = lr->next) { |
| num_listeners++; |
| found = 0; |
| for (ls = s; ls && !found; ls = ls->next) { |
| for (addr = ls->addrs; addr && !found; addr = addr->next) { |
| if (apr_sockaddr_equal(lr->bind_addr, addr->host_addr) && |
| lr->bind_addr->port == addr->host_port) { |
| found = 1; |
| ap_apply_accept_filter(s->process->pool, lr, ls); |
| } |
| } |
| } |
| |
| if (!found) { |
| ap_apply_accept_filter(s->process->pool, lr, s); |
| } |
| } |
| |
| return num_listeners; |
| } |
| |
| AP_DECLARE(apr_status_t) ap_duplicate_listeners(apr_pool_t *p, server_rec *s, |
| ap_listen_rec ***buckets, |
| int *num_buckets) |
| { |
| static int warn_once; |
| int i; |
| apr_status_t stat; |
| int use_nonblock = 0; |
| ap_listen_rec *lr; |
| |
| if (*num_buckets < 1) { |
| *num_buckets = 1; |
| if (ap_listencbratio > 0) { |
| #ifdef _SC_NPROCESSORS_ONLN |
| if (ap_have_so_reuseport) { |
| int num_online_cores = sysconf(_SC_NPROCESSORS_ONLN), |
| val = num_online_cores / ap_listencbratio; |
| if (val > 1) { |
| *num_buckets = val; |
| } |
| ap_log_perror(APLOG_MARK, APLOG_INFO, 0, p, APLOGNO(02819) |
| "Using %i listeners bucket(s) based on %i " |
| "online CPU cores and a ratio of %i", |
| *num_buckets, num_online_cores, |
| ap_listencbratio); |
| } |
| else |
| #endif |
| if (!warn_once) { |
| ap_log_perror(APLOG_MARK, APLOG_WARNING, 0, p, APLOGNO(02820) |
| "ListenCoresBucketsRatio ignored without " |
| "SO_REUSEPORT and _SC_NPROCESSORS_ONLN " |
| "support: using a single listeners bucket"); |
| warn_once = 1; |
| } |
| } |
| } |
| |
| *buckets = apr_pcalloc(p, *num_buckets * sizeof(ap_listen_rec *)); |
| (*buckets)[0] = ap_listeners; |
| |
| for (i = 1; i < *num_buckets; i++) { |
| ap_listen_rec *last = NULL; |
| lr = ap_listeners; |
| while (lr) { |
| ap_listen_rec *duplr; |
| char *hostname; |
| apr_port_t port; |
| apr_sockaddr_t *sa; |
| duplr = apr_palloc(p, sizeof(ap_listen_rec)); |
| duplr->slave = NULL; |
| duplr->protocol = apr_pstrdup(p, lr->protocol); |
| hostname = apr_pstrdup(p, lr->bind_addr->hostname); |
| port = lr->bind_addr->port; |
| apr_sockaddr_info_get(&sa, hostname, APR_UNSPEC, port, 0, p); |
| duplr->bind_addr = sa; |
| duplr->next = NULL; |
| stat = apr_socket_create(&duplr->sd, duplr->bind_addr->family, |
| SOCK_STREAM, 0, p); |
| if (stat != APR_SUCCESS) { |
| ap_log_perror(APLOG_MARK, APLOG_CRIT, 0, p, APLOGNO(02640) |
| "ap_duplicate_listeners: for address %pI, " |
| "cannot duplicate a new socket!", |
| duplr->bind_addr); |
| return stat; |
| } |
| make_sock(p, duplr); |
| #if AP_NONBLOCK_WHEN_MULTI_LISTEN |
| use_nonblock = (ap_listeners && ap_listeners->next); |
| stat = apr_socket_opt_set(duplr->sd, APR_SO_NONBLOCK, use_nonblock); |
| if (stat != APR_SUCCESS) { |
| ap_log_perror(APLOG_MARK, APLOG_CRIT, stat, p, APLOGNO(02641) |
| "unable to control socket non-blocking status"); |
| return stat; |
| } |
| #endif |
| ap_apply_accept_filter(p, duplr, s); |
| |
| if (last == NULL) { |
| (*buckets)[i] = last = duplr; |
| } |
| else { |
| last->next = duplr; |
| last = duplr; |
| } |
| lr = lr->next; |
| } |
| } |
| |
| ap_listen_buckets = *buckets; |
| ap_num_listen_buckets = *num_buckets; |
| return APR_SUCCESS; |
| } |
| |
| AP_DECLARE_NONSTD(void) ap_close_listeners(void) |
| { |
| int i; |
| |
| ap_close_listeners_ex(ap_listeners); |
| |
| /* Start from index 1 since either ap_duplicate_listeners() |
| * was called and ap_listen_buckets[0] == ap_listeners, or |
| * it wasn't and ap_num_listen_buckets == 0. |
| */ |
| for (i = 1; i < ap_num_listen_buckets; i++) { |
| ap_close_listeners_ex(ap_listen_buckets[i]); |
| } |
| } |
| |
| AP_DECLARE_NONSTD(void) ap_close_listeners_ex(ap_listen_rec *listeners) |
| { |
| ap_listen_rec *lr; |
| for (lr = listeners; lr; lr = lr->next) { |
| apr_socket_close(lr->sd); |
| lr->active = 0; |
| } |
| } |
| |
| AP_DECLARE_NONSTD(int) ap_close_selected_listeners(ap_slave_t *slave) |
| { |
| ap_listen_rec *lr; |
| int n = 0; |
| |
| for (lr = ap_listeners; lr; lr = lr->next) { |
| if (lr->slave != slave) { |
| apr_socket_close(lr->sd); |
| lr->active = 0; |
| } |
| else { |
| ++n; |
| } |
| } |
| return n; |
| } |
| |
| AP_DECLARE(void) ap_listen_pre_config(void) |
| { |
| old_listeners = ap_listeners; |
| ap_listeners = NULL; |
| ap_listen_buckets = NULL; |
| ap_num_listen_buckets = 0; |
| ap_listenbacklog = DEFAULT_LISTENBACKLOG; |
| ap_listencbratio = 0; |
| |
| /* Check once whether or not SO_REUSEPORT is supported. */ |
| if (ap_have_so_reuseport < 0) { |
| /* This is limited to Linux with defined SO_REUSEPORT (ie. 3.9+) for |
| * now since the implementation evenly distributes connections across |
| * all the listening threads/processes. |
| * |
| * *BSDs have SO_REUSEPORT too but with a different semantic: the first |
| * wildcard address bound socket or the last non-wildcard address bound |
| * socket will receive connections (no evenness guarantee); the rest of |
| * the sockets bound to the same port will not. |
| * This can't (always) work for httpd. |
| * |
| * TODO: latests DragonFlyBSD's SO_REUSEPORT (seems to?) have the same |
| * semantic as Linux, so we may need HAVE_SO_REUSEPORT available from |
| * configure.in some day. |
| */ |
| #if defined(SO_REUSEPORT) && defined(__linux__) |
| apr_socket_t *sock; |
| if (apr_socket_create(&sock, APR_UNSPEC, SOCK_STREAM, 0, |
| ap_pglobal) == APR_SUCCESS) { |
| int thesock, on = 1; |
| apr_os_sock_get(&thesock, sock); |
| ap_have_so_reuseport = (setsockopt(thesock, SOL_SOCKET, |
| SO_REUSEPORT, (void *)&on, |
| sizeof(int)) == 0); |
| apr_socket_close(sock); |
| } |
| else |
| #endif |
| ap_have_so_reuseport = 0; |
| |
| } |
| } |
| |
| AP_DECLARE_NONSTD(const char *) ap_set_listener(cmd_parms *cmd, void *dummy, |
| int argc, char *const argv[]) |
| { |
| char *host, *scope_id, *proto; |
| apr_port_t port; |
| apr_status_t rv; |
| const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); |
| |
| if (err != NULL) { |
| return err; |
| } |
| |
| if (argc < 1 || argc > 2) { |
| return "Listen requires 1 or 2 arguments."; |
| } |
| |
| rv = apr_parse_addr_port(&host, &scope_id, &port, argv[0], cmd->pool); |
| if (rv != APR_SUCCESS) { |
| return "Invalid address or port"; |
| } |
| |
| if (host && !strcmp(host, "*")) { |
| host = NULL; |
| } |
| |
| if (scope_id) { |
| /* XXX scope id support is useful with link-local IPv6 addresses */ |
| return "Scope id is not supported"; |
| } |
| |
| if (!port) { |
| return "Port must be specified"; |
| } |
| |
| if (argc != 2) { |
| if (port == 443) { |
| proto = "https"; |
| } else { |
| proto = "http"; |
| } |
| } |
| else { |
| proto = apr_pstrdup(cmd->pool, argv[1]); |
| ap_str_tolower(proto); |
| } |
| |
| return alloc_listener(cmd->server->process, host, port, proto, NULL); |
| } |
| |
| AP_DECLARE_NONSTD(const char *) ap_set_listenbacklog(cmd_parms *cmd, |
| void *dummy, |
| const char *arg) |
| { |
| int b; |
| const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); |
| |
| if (err != NULL) { |
| return err; |
| } |
| |
| b = atoi(arg); |
| if (b < 1) { |
| return "ListenBacklog must be > 0"; |
| } |
| |
| ap_listenbacklog = b; |
| return NULL; |
| } |
| |
| AP_DECLARE_NONSTD(const char *) ap_set_listencbratio(cmd_parms *cmd, |
| void *dummy, |
| const char *arg) |
| { |
| int b; |
| const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); |
| |
| if (err != NULL) { |
| return err; |
| } |
| |
| b = atoi(arg); |
| if (b < 1) { |
| return "ListenCoresBucketsRatio must be > 0"; |
| } |
| |
| ap_listencbratio = b; |
| return NULL; |
| } |
| |
| AP_DECLARE_NONSTD(const char *) ap_set_send_buffer_size(cmd_parms *cmd, |
| void *dummy, |
| const char *arg) |
| { |
| int s = atoi(arg); |
| const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); |
| |
| if (err != NULL) { |
| return err; |
| } |
| |
| if (s < 512 && s != 0) { |
| return "SendBufferSize must be >= 512 bytes, or 0 for system default."; |
| } |
| |
| send_buffer_size = s; |
| return NULL; |
| } |
| |
| AP_DECLARE_NONSTD(const char *) ap_set_receive_buffer_size(cmd_parms *cmd, |
| void *dummy, |
| const char *arg) |
| { |
| int s = atoi(arg); |
| const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); |
| |
| if (err != NULL) { |
| return err; |
| } |
| |
| if (s < 512 && s != 0) { |
| return "ReceiveBufferSize must be >= 512 bytes, or 0 for system default."; |
| } |
| |
| receive_buffer_size = s; |
| return NULL; |
| } |
