| /* ==================================================================== |
| * The Apache Software License, Version 1.1 |
| * |
| * Copyright (c) 2000-2001 The Apache Software Foundation. All rights |
| * reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. The end-user documentation included with the redistribution, |
| * if any, must include the following acknowledgment: |
| * "This product includes software developed by the |
| * Apache Software Foundation (http://www.apache.org/)." |
| * Alternately, this acknowledgment may appear in the software itself, |
| * if and wherever such third-party acknowledgments normally appear. |
| * |
| * 4. The names "Apache" and "Apache Software Foundation" must |
| * not be used to endorse or promote products derived from this |
| * software without prior written permission. For written |
| * permission, please contact apache@apache.org. |
| * |
| * 5. Products derived from this software may not be called "Apache", |
| * nor may "Apache" appear in their name, without prior written |
| * permission of the Apache Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This software consists of voluntary contributions made by many |
| * individuals on behalf of the Apache Software Foundation. For more |
| * information on the Apache Software Foundation, please see |
| * <http://www.apache.org/>. |
| * |
| */ |
| |
| /* |
| * Apache example module. Provide demonstrations of how modules do things. |
| * It is not meant to be used in a production server. Since it participates |
| * in all of the processing phases, it could conceivable interfere with |
| * the proper operation of other modules -- particularly the ones related |
| * to security. |
| * |
| * In the interest of brevity, all functions and structures internal to |
| * this module, but which may have counterparts in *real* modules, are |
| * prefixed with 'x_' instead of 'example_'. |
| */ |
| |
| #include "httpd.h" |
| #include "http_config.h" |
| #include "http_core.h" |
| #include "http_log.h" |
| #include "http_main.h" |
| #include "http_protocol.h" |
| #include "http_request.h" |
| #include "util_script.h" |
| #include "http_connection.h" |
| |
| #include "apr_strings.h" |
| |
| #include <stdio.h> |
| |
| /*--------------------------------------------------------------------------*/ |
| /* */ |
| /* Data declarations. */ |
| /* */ |
| /* Here are the static cells and structure declarations private to our */ |
| /* module. */ |
| /* */ |
| /*--------------------------------------------------------------------------*/ |
| |
| /* |
| * Sample configuration record. Used for both per-directory and per-server |
| * configuration data. |
| * |
| * It's perfectly reasonable to have two different structures for the two |
| * different environments. The same command handlers will be called for |
| * both, though, so the handlers need to be able to tell them apart. One |
| * possibility is for both structures to start with an int which is 0 for |
| * one and 1 for the other. |
| * |
| * Note that while the per-directory and per-server configuration records are |
| * available to most of the module handlers, they should be treated as |
| * READ-ONLY by all except the command and merge handlers. Sometimes handlers |
| * are handed a record that applies to the current location by implication or |
| * inheritance, and modifying it will change the rules for other locations. |
| */ |
| typedef struct x_cfg { |
| int cmode; /* Environment to which record applies |
| * (directory, server, or combination). |
| */ |
| #define CONFIG_MODE_SERVER 1 |
| #define CONFIG_MODE_DIRECTORY 2 |
| #define CONFIG_MODE_COMBO 3 /* Shouldn't ever happen. */ |
| int local; /* Boolean: "Example" directive declared |
| * here? |
| */ |
| int congenital; /* Boolean: did we inherit an "Example"? */ |
| char *trace; /* Pointer to trace string. */ |
| char *loc; /* Location to which this record applies. */ |
| } x_cfg; |
| |
| /* |
| * Let's set up a module-local static cell to point to the accreting callback |
| * trace. As each API callback is made to us, we'll tack on the particulars |
| * to whatever we've already recorded. To avoid massive memory bloat as |
| * directories are walked again and again, we record the routine/environment |
| * the first time (non-request context only), and ignore subsequent calls for |
| * the same routine/environment. |
| */ |
| static const char *trace = NULL; |
| static apr_table_t *static_calls_made = NULL; |
| |
| /* |
| * To avoid leaking memory from pools other than the per-request one, we |
| * allocate a module-private pool, and then use a sub-pool of that which gets |
| * freed each time we modify the trace. That way previous layers of trace |
| * data don't get lost. |
| */ |
| static apr_pool_t *x_pool = NULL; |
| static apr_pool_t *x_subpool = NULL; |
| |
| /* |
| * Declare ourselves so the configuration routines can find and know us. |
| * We'll fill it in at the end of the module. |
| */ |
| AP_DECLARE_DATA module example_module; |
| |
| /*--------------------------------------------------------------------------*/ |
| /* */ |
| /* The following pseudo-prototype declarations illustrate the parameters */ |
| /* passed to command handlers for the different types of directive */ |
| /* syntax. If an argument was specified in the directive definition */ |
| /* (look for "command_rec" below), it's available to the command handler */ |
| /* via the (void *) info field in the cmd_parms argument passed to the */ |
| /* handler (cmd->info for the examples below). */ |
| /* */ |
| /*--------------------------------------------------------------------------*/ |
| |
| /* |
| * Command handler for a NO_ARGS directive. Declared in the command_rec |
| * list with |
| * AP_INIT_NO_ARGS("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_NO_ARGS(cmd_parms *cmd, void *mconfig); |
| */ |
| |
| /* |
| * Command handler for a RAW_ARGS directive. The "args" argument is the text |
| * of the commandline following the directive itself. Declared in the |
| * command_rec list with |
| * AP_INIT_RAW_ARGS("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_RAW_ARGS(cmd_parms *cmd, void *mconfig, |
| * const char *args); |
| */ |
| |
| /* |
| * Command handler for a FLAG directive. The single parameter is passed in |
| * "bool", which is either zero or not for Off or On respectively. |
| * Declared in the command_rec list with |
| * AP_INIT_FLAG("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_FLAG(cmd_parms *cmd, void *mconfig, int bool); |
| */ |
| |
| /* |
| * Command handler for a TAKE1 directive. The single parameter is passed in |
| * "word1". Declared in the command_rec list with |
| * AP_INIT_TAKE1("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_TAKE1(cmd_parms *cmd, void *mconfig, |
| * char *word1); |
| */ |
| |
| /* |
| * Command handler for a TAKE2 directive. TAKE2 commands must always have |
| * exactly two arguments. Declared in the command_rec list with |
| * AP_INIT_TAKE2("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_TAKE2(cmd_parms *cmd, void *mconfig, |
| * char *word1, char *word2); |
| */ |
| |
| /* |
| * Command handler for a TAKE3 directive. Like TAKE2, these must have exactly |
| * three arguments, or the parser complains and doesn't bother calling us. |
| * Declared in the command_rec list with |
| * AP_INIT_TAKE3("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_TAKE3(cmd_parms *cmd, void *mconfig, |
| * char *word1, char *word2, char *word3); |
| */ |
| |
| /* |
| * Command handler for a TAKE12 directive. These can take either one or two |
| * arguments. |
| * - word2 is a NULL pointer if no second argument was specified. |
| * Declared in the command_rec list with |
| * AP_INIT_TAKE12("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_TAKE12(cmd_parms *cmd, void *mconfig, |
| * char *word1, char *word2); |
| */ |
| |
| /* |
| * Command handler for a TAKE123 directive. A TAKE123 directive can be given, |
| * as might be expected, one, two, or three arguments. |
| * - word2 is a NULL pointer if no second argument was specified. |
| * - word3 is a NULL pointer if no third argument was specified. |
| * Declared in the command_rec list with |
| * AP_INIT_TAKE123("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_TAKE123(cmd_parms *cmd, void *mconfig, |
| * char *word1, char *word2, char *word3); |
| */ |
| |
| /* |
| * Command handler for a TAKE13 directive. Either one or three arguments are |
| * permitted - no two-parameters-only syntax is allowed. |
| * - word2 and word3 are NULL pointers if only one argument was specified. |
| * Declared in the command_rec list with |
| * AP_INIT_TAKE13("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_TAKE13(cmd_parms *cmd, void *mconfig, |
| * char *word1, char *word2, char *word3); |
| */ |
| |
| /* |
| * Command handler for a TAKE23 directive. At least two and as many as three |
| * arguments must be specified. |
| * - word3 is a NULL pointer if no third argument was specified. |
| * Declared in the command_rec list with |
| * AP_INIT_TAKE23("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_TAKE23(cmd_parms *cmd, void *mconfig, |
| * char *word1, char *word2, char *word3); |
| */ |
| |
| /* |
| * Command handler for a ITERATE directive. |
| * - Handler is called once for each of n arguments given to the directive. |
| * - word1 points to each argument in turn. |
| * Declared in the command_rec list with |
| * AP_INIT_ITERATE("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_ITERATE(cmd_parms *cmd, void *mconfig, |
| * char *word1); |
| */ |
| |
| /* |
| * Command handler for a ITERATE2 directive. |
| * - Handler is called once for each of the second and subsequent arguments |
| * given to the directive. |
| * - word1 is the same for each call for a particular directive instance (the |
| * first argument). |
| * - word2 points to each of the second and subsequent arguments in turn. |
| * Declared in the command_rec list with |
| * AP_INIT_ITERATE2("directive", function, mconfig, where, help) |
| * |
| * static const char *handle_ITERATE2(cmd_parms *cmd, void *mconfig, |
| * char *word1, char *word2); |
| */ |
| |
| /*--------------------------------------------------------------------------*/ |
| /* */ |
| /* These routines are strictly internal to this module, and support its */ |
| /* operation. They are not referenced by any external portion of the */ |
| /* server. */ |
| /* */ |
| /*--------------------------------------------------------------------------*/ |
| |
| /* |
| * Locate our directory configuration record for the current request. |
| */ |
| static x_cfg *our_dconfig(const request_rec *r) |
| { |
| return (x_cfg *) ap_get_module_config(r->per_dir_config, &example_module); |
| } |
| |
| #if 0 |
| /* |
| * Locate our server configuration record for the specified server. |
| */ |
| static x_cfg *our_sconfig(const server_rec *s) |
| { |
| return (x_cfg *) ap_get_module_config(s->module_config, &example_module); |
| } |
| |
| /* |
| * Likewise for our configuration record for the specified request. |
| */ |
| static x_cfg *our_rconfig(const request_rec *r) |
| { |
| return (x_cfg *) ap_get_module_config(r->request_config, &example_module); |
| } |
| #endif |
| |
| /* |
| * Likewise for our configuration record for a connection. |
| */ |
| static x_cfg *our_cconfig(const conn_rec *c) |
| { |
| return (x_cfg *) ap_get_module_config(c->conn_config, &example_module); |
| } |
| |
| /* |
| * This routine sets up some module-wide cells if they haven't been already. |
| */ |
| static void setup_module_cells(void) |
| { |
| /* |
| * If we haven't already allocated our module-private pool, do so now. |
| */ |
| if (x_pool == NULL) { |
| apr_pool_create(&x_pool, NULL); |
| }; |
| /* |
| * Likewise for the table of routine/environment pairs we visit outside of |
| * request context. |
| */ |
| if (static_calls_made == NULL) { |
| static_calls_made = apr_table_make(x_pool, 16); |
| }; |
| } |
| |
| /* |
| * This routine is used to add a trace of a callback to the list. We're |
| * passed the server record (if available), the request record (if available), |
| * a pointer to our private configuration record (if available) for the |
| * environment to which the callback is supposed to apply, and some text. We |
| * turn this into a textual representation and add it to the tail of the list. |
| * The list can be displayed by the x_handler() routine. |
| * |
| * If the call occurs within a request context (i.e., we're passed a request |
| * record), we put the trace into the request apr_pool_t and attach it to the |
| * request via the notes mechanism. Otherwise, the trace gets added |
| * to the static (non-request-specific) list. |
| * |
| * Note that the r->notes table is only for storing strings; if you need to |
| * maintain per-request data of any other type, you need to use another |
| * mechanism. |
| */ |
| |
| #define TRACE_NOTE "example-trace" |
| |
| static void trace_add(server_rec *s, request_rec *r, x_cfg *mconfig, |
| const char *note) |
| { |
| const char *sofar; |
| char *addon; |
| char *where; |
| apr_pool_t *p; |
| const char *trace_copy; |
| |
| /* |
| * Make sure our pools and tables are set up - we need 'em. |
| */ |
| setup_module_cells(); |
| /* |
| * Now, if we're in request-context, we use the request pool. |
| */ |
| if (r != NULL) { |
| p = r->pool; |
| if ((trace_copy = apr_table_get(r->notes, TRACE_NOTE)) == NULL) { |
| trace_copy = ""; |
| } |
| } |
| else { |
| /* |
| * We're not in request context, so the trace gets attached to our |
| * module-wide pool. We do the create/destroy every time we're called |
| * in non-request context; this avoids leaking memory in some of |
| * the subsequent calls that allocate memory only once (such as the |
| * key formation below). |
| * |
| * Make a new sub-pool and copy any existing trace to it. Point the |
| * trace cell at the copied value. |
| */ |
| apr_pool_create(&p, x_pool); |
| if (trace != NULL) { |
| trace = apr_pstrdup(p, trace); |
| } |
| /* |
| * Now, if we have a sub-pool from before, nuke it and replace with |
| * the one we just allocated. |
| */ |
| if (x_subpool != NULL) { |
| apr_pool_destroy(x_subpool); |
| } |
| x_subpool = p; |
| trace_copy = trace; |
| } |
| /* |
| * If we weren't passed a configuration record, we can't figure out to |
| * what location this call applies. This only happens for co-routines |
| * that don't operate in a particular directory or server context. If we |
| * got a valid record, extract the location (directory or server) to which |
| * it applies. |
| */ |
| where = (mconfig != NULL) ? mconfig->loc : "nowhere"; |
| where = (where != NULL) ? where : ""; |
| /* |
| * Now, if we're not in request context, see if we've been called with |
| * this particular combination before. The apr_table_t is allocated in the |
| * module's private pool, which doesn't get destroyed. |
| */ |
| if (r == NULL) { |
| char *key; |
| |
| key = apr_pstrcat(p, note, ":", where, NULL); |
| if (apr_table_get(static_calls_made, key) != NULL) { |
| /* |
| * Been here, done this. |
| */ |
| return; |
| } |
| else { |
| /* |
| * First time for this combination of routine and environment - |
| * log it so we don't do it again. |
| */ |
| apr_table_set(static_calls_made, key, "been here"); |
| } |
| } |
| addon = apr_pstrcat(p, |
| " <li>\n" |
| " <dl>\n" |
| " <dt><samp>", note, "</samp></dt>\n" |
| " <dd><samp>[", where, "]</samp></dd>\n" |
| " </dl>\n" |
| " </li>\n", |
| NULL); |
| sofar = (trace_copy == NULL) ? "" : trace_copy; |
| trace_copy = apr_pstrcat(p, sofar, addon, NULL); |
| if (r != NULL) { |
| apr_table_set(r->notes, TRACE_NOTE, trace_copy); |
| } |
| else { |
| trace = trace_copy; |
| } |
| /* |
| * You *could* change the following if you wanted to see the calling |
| * sequence reported in the server's error_log, but beware - almost all of |
| * these co-routines are called for every single request, and the impact |
| * on the size (and readability) of the error_log is considerable. |
| */ |
| #define EXAMPLE_LOG_EACH 0 |
| if (EXAMPLE_LOG_EACH && (s != NULL)) { |
| ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, s, "mod_example: %s", note); |
| } |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| /* We prototyped the various syntax for command handlers (routines that */ |
| /* are called when the configuration parser detects a directive declared */ |
| /* by our module) earlier. Now we actually declare a "real" routine that */ |
| /* will be invoked by the parser when our "real" directive is */ |
| /* encountered. */ |
| /* */ |
| /* If a command handler encounters a problem processing the directive, it */ |
| /* signals this fact by returning a non-NULL pointer to a string */ |
| /* describing the problem. */ |
| /* */ |
| /* The magic return value DECLINE_CMD is used to deal with directives */ |
| /* that might be declared by multiple modules. If the command handler */ |
| /* returns NULL, the directive was processed; if it returns DECLINE_CMD, */ |
| /* the next module (if any) that declares the directive is given a chance */ |
| /* at it. If it returns any other value, it's treated as the text of an */ |
| /* error message. */ |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * Command handler for the NO_ARGS "Example" directive. All we do is mark the |
| * call in the trace log, and flag the applicability of the directive to the |
| * current location in that location's configuration record. |
| */ |
| static const char *cmd_example(cmd_parms *cmd, void *mconfig) |
| { |
| x_cfg *cfg = (x_cfg *) mconfig; |
| |
| /* |
| * "Example Wuz Here" |
| */ |
| cfg->local = 1; |
| trace_add(cmd->server, NULL, cfg, "cmd_example()"); |
| return NULL; |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| /* */ |
| /* Now we declare our content handlers, which are invoked when the server */ |
| /* encounters a document which our module is supposed to have a chance to */ |
| /* see. (See mod_mime's SetHandler and AddHandler directives, and the */ |
| /* mod_info and mod_status examples, for more details.) */ |
| /* */ |
| /* Since content handlers are dumping data directly into the connexion */ |
| /* (using the r*() routines, such as rputs() and rprintf()) without */ |
| /* intervention by other parts of the server, they need to make */ |
| /* sure any accumulated HTTP headers are sent first. This is done by */ |
| /* calling send_http_header(). Otherwise, no header will be sent at all, */ |
| /* and the output sent to the client will actually be HTTP-uncompliant. */ |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * Sample content handler. All this does is display the call list that has |
| * been built up so far. |
| * |
| * The return value instructs the caller concerning what happened and what to |
| * do next: |
| * OK ("we did our thing") |
| * DECLINED ("this isn't something with which we want to get involved") |
| * HTTP_mumble ("an error status should be reported") |
| */ |
| static int x_handler(request_rec *r) |
| { |
| x_cfg *dcfg; |
| |
| dcfg = our_dconfig(r); |
| trace_add(r->server, r, dcfg, "x_handler()"); |
| /* |
| * We're about to start sending content, so we need to force the HTTP |
| * headers to be sent at this point. Otherwise, no headers will be sent |
| * at all. We can set any we like first, of course. **NOTE** Here's |
| * where you set the "Content-type" header, and you do so by putting it in |
| * r->content_type, *not* r->headers_out("Content-type"). If you don't |
| * set it, it will be filled in with the server's default type (typically |
| * "text/plain"). You *must* also ensure that r->content_type is lower |
| * case. |
| * |
| * We also need to start a timer so the server can know if the connexion |
| * is broken. |
| */ |
| r->content_type = "text/html"; |
| /* |
| * If we're only supposed to send header information (HEAD request), we're |
| * already there. |
| */ |
| if (r->header_only) { |
| return OK; |
| } |
| |
| /* |
| * Now send our actual output. Since we tagged this as being |
| * "text/html", we need to embed any HTML. |
| */ |
| ap_rputs(DOCTYPE_HTML_3_2, r); |
| ap_rputs("<HTML>\n", r); |
| ap_rputs(" <HEAD>\n", r); |
| ap_rputs(" <TITLE>mod_example Module Content-Handler Output\n", r); |
| ap_rputs(" </TITLE>\n", r); |
| ap_rputs(" </HEAD>\n", r); |
| ap_rputs(" <BODY>\n", r); |
| ap_rputs(" <H1><SAMP>mod_example</SAMP> Module Content-Handler Output\n", r); |
| ap_rputs(" </H1>\n", r); |
| ap_rputs(" <P>\n", r); |
| ap_rprintf(r, " Apache HTTP Server version: \"%s\"\n", |
| ap_get_server_version()); |
| ap_rputs(" <BR>\n", r); |
| ap_rprintf(r, " Server built: \"%s\"\n", ap_get_server_built()); |
| ap_rputs(" </P>\n", r);; |
| ap_rputs(" <P>\n", r); |
| ap_rputs(" The format for the callback trace is:\n", r); |
| ap_rputs(" </P>\n", r); |
| ap_rputs(" <DL>\n", r); |
| ap_rputs(" <DT><EM>n</EM>.<SAMP><routine-name>", r); |
| ap_rputs("(<routine-data>)</SAMP>\n", r); |
| ap_rputs(" </DT>\n", r); |
| ap_rputs(" <DD><SAMP>[<applies-to>]</SAMP>\n", r); |
| ap_rputs(" </DD>\n", r); |
| ap_rputs(" </DL>\n", r); |
| ap_rputs(" <P>\n", r); |
| ap_rputs(" The <SAMP><routine-data></SAMP> is supplied by\n", r); |
| ap_rputs(" the routine when it requests the trace,\n", r); |
| ap_rputs(" and the <SAMP><applies-to></SAMP> is extracted\n", r); |
| ap_rputs(" from the configuration record at the time of the trace.\n", r); |
| ap_rputs(" <STRONG>SVR()</STRONG> indicates a server environment\n", r); |
| ap_rputs(" (blank means the main or default server, otherwise it's\n", r); |
| ap_rputs(" the name of the VirtualHost); <STRONG>DIR()</STRONG>\n", r); |
| ap_rputs(" indicates a location in the URL or filesystem\n", r); |
| ap_rputs(" namespace.\n", r); |
| ap_rputs(" </P>\n", r); |
| ap_rprintf(r, " <H2>Static callbacks so far:</H2>\n <OL>\n%s </OL>\n", |
| trace); |
| ap_rputs(" <H2>Request-specific callbacks so far:</H2>\n", r); |
| ap_rprintf(r, " <OL>\n%s </OL>\n", apr_table_get(r->notes, TRACE_NOTE)); |
| ap_rputs(" <H2>Environment for <EM>this</EM> call:</H2>\n", r); |
| ap_rputs(" <UL>\n", r); |
| ap_rprintf(r, " <LI>Applies-to: <SAMP>%s</SAMP>\n </LI>\n", dcfg->loc); |
| ap_rprintf(r, " <LI>\"Example\" directive declared here: %s\n </LI>\n", |
| (dcfg->local ? "YES" : "NO")); |
| ap_rprintf(r, " <LI>\"Example\" inherited: %s\n </LI>\n", |
| (dcfg->congenital ? "YES" : "NO")); |
| ap_rputs(" </UL>\n", r); |
| ap_rputs(" </BODY>\n", r); |
| ap_rputs("</HTML>\n", r); |
| /* |
| * We're all done, so cancel the timeout we set. Since this is probably |
| * the end of the request we *could* assume this would be done during |
| * post-processing - but it's possible that another handler might be |
| * called and inherit our outstanding timer. Not good; to each its own. |
| */ |
| /* |
| * We did what we wanted to do, so tell the rest of the server we |
| * succeeded. |
| */ |
| return OK; |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| /* */ |
| /* Now let's declare routines for each of the callback phase in order. */ |
| /* (That's the order in which they're listed in the callback list, *not */ |
| /* the order in which the server calls them! See the command_rec */ |
| /* declaration near the bottom of this file.) Note that these may be */ |
| /* called for situations that don't relate primarily to our function - in */ |
| /* other words, the fixup handler shouldn't assume that the request has */ |
| /* to do with "example" stuff. */ |
| /* */ |
| /* With the exception of the content handler, all of our routines will be */ |
| /* called for each request, unless an earlier handler from another module */ |
| /* aborted the sequence. */ |
| /* */ |
| /* Handlers that are declared as "int" can return the following: */ |
| /* */ |
| /* OK Handler accepted the request and did its thing with it. */ |
| /* DECLINED Handler took no action. */ |
| /* HTTP_mumble Handler looked at request and found it wanting. */ |
| /* */ |
| /* What the server does after calling a module handler depends upon the */ |
| /* handler's return value. In all cases, if the handler returns */ |
| /* DECLINED, the server will continue to the next module with an handler */ |
| /* for the current phase. However, if the handler return a non-OK, */ |
| /* non-DECLINED status, the server aborts the request right there. If */ |
| /* the handler returns OK, the server's next action is phase-specific; */ |
| /* see the individual handler comments below for details. */ |
| /* */ |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * This function is called during server initialisation. Any information |
| * that needs to be recorded must be in static cells, since there's no |
| * configuration record. |
| * |
| * There is no return value. |
| */ |
| |
| /* |
| * This function is called when an heavy-weight process (such as a child) is |
| * being run down or destroyed. As with the child initialisation function, |
| * any information that needs to be recorded must be in static cells, since |
| * there's no configuration record. |
| * |
| * There is no return value. |
| */ |
| |
| /* |
| * This function is called during server initialisation when an heavy-weight |
| * process (such as a child) is being initialised. As with the |
| * module initialisation function, any information that needs to be recorded |
| * must be in static cells, since there's no configuration record. |
| * |
| * There is no return value. |
| */ |
| |
| /* |
| * This function gets called to create a per-directory configuration |
| * record. This will be called for the "default" server environment, and for |
| * each directory for which the parser finds any of our directives applicable. |
| * If a directory doesn't have any of our directives involved (i.e., they |
| * aren't in the .htaccess file, or a <Location>, <Directory>, or related |
| * block), this routine will *not* be called - the configuration for the |
| * closest ancestor is used. |
| * |
| * The return value is a pointer to the created module-specific |
| * structure. |
| */ |
| static void *x_create_dir_config(apr_pool_t *p, char *dirspec) |
| { |
| x_cfg *cfg; |
| char *dname = dirspec; |
| |
| /* |
| * Allocate the space for our record from the pool supplied. |
| */ |
| cfg = (x_cfg *) apr_pcalloc(p, sizeof(x_cfg)); |
| /* |
| * Now fill in the defaults. If there are any `parent' configuration |
| * records, they'll get merged as part of a separate callback. |
| */ |
| cfg->local = 0; |
| cfg->congenital = 0; |
| cfg->cmode = CONFIG_MODE_DIRECTORY; |
| /* |
| * Finally, add our trace to the callback list. |
| */ |
| dname = (dname != NULL) ? dname : ""; |
| cfg->loc = apr_pstrcat(p, "DIR(", dname, ")", NULL); |
| trace_add(NULL, NULL, cfg, "x_create_dir_config()"); |
| return (void *) cfg; |
| } |
| |
| /* |
| * This function gets called to merge two per-directory configuration |
| * records. This is typically done to cope with things like .htaccess files |
| * or <Location> directives for directories that are beneath one for which a |
| * configuration record was already created. The routine has the |
| * responsibility of creating a new record and merging the contents of the |
| * other two into it appropriately. If the module doesn't declare a merge |
| * routine, the record for the closest ancestor location (that has one) is |
| * used exclusively. |
| * |
| * The routine MUST NOT modify any of its arguments! |
| * |
| * The return value is a pointer to the created module-specific structure |
| * containing the merged values. |
| */ |
| static void *x_merge_dir_config(apr_pool_t *p, void *parent_conf, |
| void *newloc_conf) |
| { |
| |
| x_cfg *merged_config = (x_cfg *) apr_pcalloc(p, sizeof(x_cfg)); |
| x_cfg *pconf = (x_cfg *) parent_conf; |
| x_cfg *nconf = (x_cfg *) newloc_conf; |
| char *note; |
| |
| /* |
| * Some things get copied directly from the more-specific record, rather |
| * than getting merged. |
| */ |
| merged_config->local = nconf->local; |
| merged_config->loc = apr_pstrdup(p, nconf->loc); |
| /* |
| * Others, like the setting of the `congenital' flag, get ORed in. The |
| * setting of that particular flag, for instance, is TRUE if it was ever |
| * true anywhere in the upstream configuration. |
| */ |
| merged_config->congenital = (pconf->congenital | pconf->local); |
| /* |
| * If we're merging records for two different types of environment (server |
| * and directory), mark the new record appropriately. Otherwise, inherit |
| * the current value. |
| */ |
| merged_config->cmode = |
| (pconf->cmode == nconf->cmode) ? pconf->cmode : CONFIG_MODE_COMBO; |
| /* |
| * Now just record our being called in the trace list. Include the |
| * locations we were asked to merge. |
| */ |
| note = apr_pstrcat(p, "x_merge_dir_config(\"", pconf->loc, "\",\"", |
| nconf->loc, "\")", NULL); |
| trace_add(NULL, NULL, merged_config, note); |
| return (void *) merged_config; |
| } |
| |
| /* |
| * This function gets called to create a per-server configuration |
| * record. It will always be called for the "default" server. |
| * |
| * The return value is a pointer to the created module-specific |
| * structure. |
| */ |
| static void *x_create_server_config(apr_pool_t *p, server_rec *s) |
| { |
| |
| x_cfg *cfg; |
| char *sname = s->server_hostname; |
| |
| /* |
| * As with the x_create_dir_config() reoutine, we allocate and fill |
| * in an empty record. |
| */ |
| cfg = (x_cfg *) apr_pcalloc(p, sizeof(x_cfg)); |
| cfg->local = 0; |
| cfg->congenital = 0; |
| cfg->cmode = CONFIG_MODE_SERVER; |
| /* |
| * Note that we were called in the trace list. |
| */ |
| sname = (sname != NULL) ? sname : ""; |
| cfg->loc = apr_pstrcat(p, "SVR(", sname, ")", NULL); |
| trace_add(s, NULL, cfg, "x_create_server_config()"); |
| return (void *) cfg; |
| } |
| |
| /* |
| * This function gets called to merge two per-server configuration |
| * records. This is typically done to cope with things like virtual hosts and |
| * the default server configuration The routine has the responsibility of |
| * creating a new record and merging the contents of the other two into it |
| * appropriately. If the module doesn't declare a merge routine, the more |
| * specific existing record is used exclusively. |
| * |
| * The routine MUST NOT modify any of its arguments! |
| * |
| * The return value is a pointer to the created module-specific structure |
| * containing the merged values. |
| */ |
| static void *x_merge_server_config(apr_pool_t *p, void *server1_conf, |
| void *server2_conf) |
| { |
| |
| x_cfg *merged_config = (x_cfg *) apr_pcalloc(p, sizeof(x_cfg)); |
| x_cfg *s1conf = (x_cfg *) server1_conf; |
| x_cfg *s2conf = (x_cfg *) server2_conf; |
| char *note; |
| |
| /* |
| * Our inheritance rules are our own, and part of our module's semantics. |
| * Basically, just note whence we came. |
| */ |
| merged_config->cmode = |
| (s1conf->cmode == s2conf->cmode) ? s1conf->cmode : CONFIG_MODE_COMBO; |
| merged_config->local = s2conf->local; |
| merged_config->congenital = (s1conf->congenital | s1conf->local); |
| merged_config->loc = apr_pstrdup(p, s2conf->loc); |
| /* |
| * Trace our call, including what we were asked to merge. |
| */ |
| note = apr_pstrcat(p, "x_merge_server_config(\"", s1conf->loc, "\",\"", |
| s2conf->loc, "\")", NULL); |
| trace_add(NULL, NULL, merged_config, note); |
| return (void *) merged_config; |
| } |
| |
| /* |
| * This routine is called before the server processes the configuration |
| * files. There is no return value. |
| */ |
| static void x_pre_config(apr_pool_t *pconf, apr_pool_t *plog, |
| apr_pool_t *ptemp) |
| { |
| /* |
| * Log the call and exit. |
| */ |
| trace_add(NULL, NULL, NULL, "x_pre_config()"); |
| } |
| |
| /* |
| * This routine is called to perform any module-specific fixing of header |
| * fields, et cetera. It is invoked just before any content-handler. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, the |
| * server will still call any remaining modules with an handler for this |
| * phase. |
| */ |
| static void x_post_config(apr_pool_t *pconf, apr_pool_t *plog, |
| apr_pool_t *ptemp, server_rec *s) |
| { |
| /* |
| * Log the call and exit. |
| */ |
| trace_add(NULL, NULL, NULL, "x_post_config()"); |
| } |
| |
| /* |
| * This routine is called to perform any module-specific fixing of header |
| * fields, et cetera. It is invoked just before any content-handler. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, the |
| * server will still call any remaining modules with an handler for this |
| * phase. |
| */ |
| static void x_open_logs(apr_pool_t *pconf, apr_pool_t *plog, |
| apr_pool_t *ptemp, server_rec *s) |
| { |
| /* |
| * Log the call and exit. |
| */ |
| trace_add(s, NULL, NULL, "x_open_logs()"); |
| } |
| |
| /* |
| * All our process-death routine does is add its trace to the log. |
| */ |
| static apr_status_t x_child_exit(void *data) |
| { |
| char *note; |
| server_rec *s = data; |
| char *sname = s->server_hostname; |
| |
| /* |
| * The arbitrary text we add to our trace entry indicates for which server |
| * we're being called. |
| */ |
| sname = (sname != NULL) ? sname : ""; |
| note = apr_pstrcat(s->process->pool, "x_child_exit(", sname, ")", NULL); |
| trace_add(s, NULL, NULL, note); |
| return APR_SUCCESS; |
| } |
| |
| /* |
| * All our process initialiser does is add its trace to the log. |
| */ |
| static void x_child_init(apr_pool_t *p, server_rec *s) |
| { |
| char *note; |
| char *sname = s->server_hostname; |
| |
| /* |
| * Set up any module cells that ought to be initialised. |
| */ |
| setup_module_cells(); |
| /* |
| * The arbitrary text we add to our trace entry indicates for which server |
| * we're being called. |
| */ |
| sname = (sname != NULL) ? sname : ""; |
| note = apr_pstrcat(p, "x_child_init(", sname, ")", NULL); |
| trace_add(s, NULL, NULL, note); |
| |
| apr_pool_cleanup_register(p, s, x_child_exit, x_child_exit); |
| } |
| |
| /* |
| * This routine is called to perform any module-specific fixing of header |
| * fields, et cetera. It is invoked just before any content-handler. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, the |
| * server will still call any remaining modules with an handler for this |
| * phase. |
| */ |
| static const char *x_http_method(const request_rec *r) |
| { |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * Log the call and exit. |
| */ |
| trace_add(r->server, NULL, cfg, "x_post_config()"); |
| return "foo"; |
| } |
| |
| /* |
| * This routine is called to perform any module-specific fixing of header |
| * fields, et cetera. It is invoked just before any content-handler. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, the |
| * server will still call any remaining modules with an handler for this |
| * phase. |
| */ |
| static apr_port_t x_default_port(const request_rec *r) |
| { |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * Log the call and exit. |
| */ |
| trace_add(r->server, NULL, cfg, "x_post_config()"); |
| return 80; |
| } |
| |
| /* |
| * This routine is called to perform any module-specific fixing of header |
| * fields, et cetera. It is invoked just before any content-handler. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, the |
| * server will still call any remaining modules with an handler for this |
| * phase. |
| */ |
| static void x_insert_filter(request_rec *r) |
| { |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * Log the call and exit. |
| */ |
| trace_add(r->server, NULL, cfg, "x_post_config()"); |
| } |
| |
| /* |
| * XXX fix my comment!!!!!! this sounds like the comment for a fixup |
| * handler |
| * |
| * This routine is called to perform any module-specific fixing of header |
| * fields, et cetera. It is invoked just before any content-handler. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, the |
| * server will still call any remaining modules with an handler for this |
| * phase. |
| */ |
| static int x_quick_handler(request_rec *r) |
| { |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * Log the call and exit. |
| */ |
| trace_add(r->server, NULL, cfg, "x_post_config()"); |
| return DECLINED; |
| } |
| |
| /* |
| * This routine is called to perform any module-specific fixing of header |
| * fields, et cetera. It is invoked just before any content-handler. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, the |
| * server will still call any remaining modules with an handler for this |
| * phase. |
| */ |
| static int x_pre_connection(conn_rec *c) |
| { |
| x_cfg *cfg; |
| |
| cfg = our_cconfig(c); |
| #if 0 |
| /* |
| * Log the call and exit. |
| */ |
| trace_add(r->server, NULL, cfg, "x_post_config()"); |
| #endif |
| return OK; |
| } |
| |
| /* |
| * This routine is called after the request has been read but before any other |
| * phases have been processed. This allows us to make decisions based upon |
| * the input header fields. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, no |
| * further modules are called for this phase. |
| */ |
| static int x_post_read_request(request_rec *r) |
| { |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * We don't actually *do* anything here, except note the fact that we were |
| * called. |
| */ |
| trace_add(r->server, r, cfg, "x_post_read_request()"); |
| return DECLINED; |
| } |
| |
| /* |
| * This routine gives our module an opportunity to translate the URI into an |
| * actual filename. If we don't do anything special, the server's default |
| * rules (Alias directives and the like) will continue to be followed. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, no |
| * further modules are called for this phase. |
| */ |
| static int x_translate_handler(request_rec *r) |
| { |
| |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * We don't actually *do* anything here, except note the fact that we were |
| * called. |
| */ |
| trace_add(r->server, r, cfg, "x_translate_handler()"); |
| return DECLINED; |
| } |
| |
| /* |
| * This routine is called to check the authentication information sent with |
| * the request (such as looking up the user in a database and verifying that |
| * the [encrypted] password sent matches the one in the database). |
| * |
| * The return value is OK, DECLINED, or some HTTP_mumble error (typically |
| * HTTP_UNAUTHORIZED). If we return OK, no other modules are given a chance |
| * at the request during this phase. |
| */ |
| static int x_check_user_id(request_rec *r) |
| { |
| |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * Don't do anything except log the call. |
| */ |
| trace_add(r->server, r, cfg, "x_check_user_id()"); |
| return DECLINED; |
| } |
| |
| /* |
| * This routine is called to check to see if the resource being requested |
| * requires authorisation. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, no |
| * other modules are called during this phase. |
| * |
| * If *all* modules return DECLINED, the request is aborted with a server |
| * error. |
| */ |
| static int x_auth_checker(request_rec *r) |
| { |
| |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * Log the call and return OK, or access will be denied (even though we |
| * didn't actually do anything). |
| */ |
| trace_add(r->server, r, cfg, "x_auth_checker()"); |
| return DECLINED; |
| } |
| |
| /* |
| * This routine is called to check for any module-specific restrictions placed |
| * upon the requested resource. (See the mod_access module for an example.) |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. All modules with an |
| * handler for this phase are called regardless of whether their predecessors |
| * return OK or DECLINED. The first one to return any other status, however, |
| * will abort the sequence (and the request) as usual. |
| */ |
| static int x_access_checker(request_rec *r) |
| { |
| |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| trace_add(r->server, r, cfg, "x_access_checker()"); |
| return DECLINED; |
| } |
| |
| /* |
| * This routine is called to determine and/or set the various document type |
| * information bits, like Content-type (via r->content_type), language, et |
| * cetera. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, no |
| * further modules are given a chance at the request for this phase. |
| */ |
| static int x_type_checker(request_rec *r) |
| { |
| |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * Log the call, but don't do anything else - and report truthfully that |
| * we didn't do anything. |
| */ |
| trace_add(r->server, r, cfg, "x_type_checker()"); |
| return DECLINED; |
| } |
| |
| /* |
| * This routine is called to perform any module-specific fixing of header |
| * fields, et cetera. It is invoked just before any content-handler. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, the |
| * server will still call any remaining modules with an handler for this |
| * phase. |
| */ |
| static int x_fixer_upper(request_rec *r) |
| { |
| |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| /* |
| * Log the call and exit. |
| */ |
| trace_add(r->server, r, cfg, "x_fixer_upper()"); |
| return OK; |
| } |
| |
| /* |
| * This routine is called to perform any module-specific logging activities |
| * over and above the normal server things. |
| * |
| * The return value is OK, DECLINED, or HTTP_mumble. If we return OK, any |
| * remaining modules with an handler for this phase will still be called. |
| */ |
| static int x_logger(request_rec *r) |
| { |
| |
| x_cfg *cfg; |
| |
| cfg = our_dconfig(r); |
| trace_add(r->server, r, cfg, "x_logger()"); |
| return DECLINED; |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| /* */ |
| /* Which functions are responsible for which hooks in the server. */ |
| /* */ |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * Each function our module provides to handle a particular hook is |
| * specified here. The functions are registered using |
| * ap_hook_foo(name, predecessors, successors, position) |
| * where foo is the name of the hook. |
| * |
| * The args are as follows: |
| * name -> the name of the function to call. |
| * predecessors -> a list of modules whose calls to this hook must be |
| * invoked before this module. |
| * successors -> a list of modules whose calls to this hook must be |
| * invoked after this module. |
| * position -> The relative position of this module. One of |
| * APR_HOOK_FIRST, APR_HOOK_MIDDLE, or APR_HOOK_LAST. |
| * Most modules will use APR_HOOK_MIDDLE. If multiple |
| * modules use the same relative position, Apache will |
| * determine which to call first. |
| * If your module relies on another module to run first, |
| * or another module running after yours, use the |
| * predecessors and/or successors. |
| * |
| * The number in brackets indicates the order in which the routine is called |
| * during request processing. Note that not all routines are necessarily |
| * called (such as if a resource doesn't have access restrictions). |
| * The actual delivery of content to the browser [9] is not handled by |
| * a hook; see the handler declarations below. |
| */ |
| static void x_register_hooks(apr_pool_t *p) |
| { |
| ap_hook_pre_config(x_pre_config, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_post_config(x_post_config, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_open_logs(x_open_logs, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_child_init(x_child_init, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_handler(x_handler, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_quick_handler(x_quick_handler, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_pre_connection(x_pre_connection, NULL, NULL, APR_HOOK_MIDDLE); |
| /* This module doesn't have a process connection phase, but I am leaving |
| * the code in, in-case somebody wants to add one. |
| */ |
| /* ap_hook_process_connection(x_fixer_upper, NULL, NULL, APR_HOOK_MIDDLE); */ |
| /* [1] post read_request handling */ |
| ap_hook_post_read_request(x_post_read_request, NULL, NULL, |
| APR_HOOK_MIDDLE); |
| ap_hook_log_transaction(x_logger, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_http_method(x_http_method, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_default_port(x_default_port, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_translate_name(x_translate_handler, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_check_user_id(x_check_user_id, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_fixups(x_fixer_upper, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_type_checker(x_type_checker, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_access_checker(x_access_checker, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_auth_checker(x_auth_checker, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_insert_filter(x_insert_filter, NULL, NULL, APR_HOOK_MIDDLE); |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| /* */ |
| /* All of the routines have been declared now. Here's the list of */ |
| /* directives specific to our module, and information about where they */ |
| /* may appear and how the command parser should pass them to us for */ |
| /* processing. Note that care must be taken to ensure that there are NO */ |
| /* collisions of directive names between modules. */ |
| /* */ |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * List of directives specific to our module. |
| */ |
| static const command_rec x_cmds[] = |
| { |
| AP_INIT_NO_ARGS( |
| "Example", /* directive name */ |
| cmd_example, /* config action routine */ |
| NULL, /* argument to include in call */ |
| OR_OPTIONS, /* where available */ |
| "Example directive - no arguments" /* directive description */ |
| ), |
| {NULL} |
| }; |
| |
| /*--------------------------------------------------------------------------*/ |
| /* */ |
| /* Now the list of content handlers available from this module. */ |
| /* */ |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * List of content handlers our module supplies. Each handler is defined by |
| * two parts: a name by which it can be referenced (such as by |
| * {Add,Set}Handler), and the actual routine name. The list is terminated by |
| * a NULL block, since it can be of variable length. |
| * |
| * Note that content-handlers are invoked on a most-specific to least-specific |
| * basis; that is, a handler that is declared for "text/plain" will be |
| * invoked before one that was declared for "text / *". Note also that |
| * if a content-handler returns anything except DECLINED, no other |
| * content-handlers will be called. |
| */ |
| #if 0 |
| static const handler_rec x_handlers[] = |
| { |
| {"example-handler", x_handler}, |
| {NULL} |
| }; |
| #endif |
| |
| /*--------------------------------------------------------------------------*/ |
| /* */ |
| /* Finally, the list of callback routines and data structures that provide */ |
| /* the static hooks into our module from the other parts of the server. */ |
| /* */ |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * Module definition for configuration. If a particular callback is not |
| * needed, replace its routine name below with the word NULL. |
| */ |
| AP_DECLARE_DATA module example_module = |
| { |
| STANDARD20_MODULE_STUFF, |
| x_create_dir_config, /* per-directory config creator */ |
| x_merge_dir_config, /* dir config merger */ |
| x_create_server_config, /* server config creator */ |
| x_merge_server_config, /* server config merger */ |
| x_cmds, /* command table */ |
| x_register_hooks, /* set up other request processing hooks */ |
| }; |