APACHE_1_3_3/Makefile.tmpl - httpd - Git at Google

 ## ====================================================================
 ## Copyright (c) 1998 The Apache Group.  All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without
 ## modification, are permitted provided that the following conditions
 ## are met:
 ##
 ## 1. Redistributions of source code must retain the above copyright
 ##    notice, this list of conditions and the following disclaimer.
 ##
 ## 2. Redistributions in binary form must reproduce the above copyright
 ##    notice, this list of conditions and the following disclaimer in
 ##    the documentation and/or other materials provided with the
 ##    distribution.
 ##
 ## 3. All advertising materials mentioning features or use of this
 ##    software must display the following acknowledgment:
 ##    "This product includes software developed by the Apache Group
 ##    for use in the Apache HTTP server project (http://www.apache.org/)."
 ##
 ## 4. The names "Apache Server" and "Apache Group" must not be used to
 ##    endorse or promote products derived from this software without
 ##    prior written permission. For written permission, please contact
 ##    apache@apache.org.
 ##
 ## 5. Products derived from this software may not be called "Apache"
 ##    nor may "Apache" appear in their names without prior written
 ##    permission of the Apache Group.
 ##
 ## 6. Redistributions of any form whatsoever must retain the following
 ##    acknowledgment:
 ##    "This product includes software developed by the Apache Group
 ##    for use in the Apache HTTP server project (http://www.apache.org/)."
 ##
 ## THIS SOFTWARE IS PROVIDED BY THE APACHE GROUP ``AS IS'' AND ANY
 ## EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 ## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 ## PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE APACHE GROUP OR
 ## ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 ## NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 ## LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 ## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 ## STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 ## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 ## OF THE POSSIBILITY OF SUCH DAMAGE.
 ## ====================================================================
 ##
 ## This software consists of voluntary contributions made by many
 ## individuals on behalf of the Apache Group and was originally based
 ## on public domain software written at the National Center for
 ## Supercomputing Applications, University of Illinois, Urbana-Champaign.
 ## For more information on the Apache Group and the Apache HTTP server
 ## project, please see <http://www.apache.org/>.
 ##

 ##
 ##  Makefile -- Apache Autoconf-style Interface (APACI)
 ##              top-level control Makefile for out-of-the-box
 ##              build and installation procedure.
 ##
 ##  Written by Ralf S. Engelschall <rse@apache.org>
 ##

 ## ==================================================================
 ##                              Options
 ## ==================================================================

 #   safe environment
 SHELL           = /bin/sh

 #   paths to the source tree parts
 TOP             = @TOP@
 SRC             = @SRC@
 MKF             = @MKF@
 AUX             = @AUX@

 #   build tools
 CP              = cp
 LN              = ln
 RM              = rm -f
 TAR             = tar
 MKDIR           = $(TOP)/$(AUX)/mkdir.sh
 INSTALL         = $(TOP)/$(AUX)/install.sh -c
 INSTALL_PROGRAM = $(INSTALL) -s -m 755
 INSTALL_DSO     = $(INSTALL) -m 755
 INSTALL_SCRIPT  = $(INSTALL) -m 755
 INSTALL_DATA    = $(INSTALL) -m 644
 PERL            = @PERL@

 #   installation root
 #   (overrideable by package maintainers for
 #   rolling packages without bristling the system)
 root            =

 #   installation paths
 prefix          = @prefix@
 exec_prefix     = @exec_prefix@
 bindir          = @bindir@
 sbindir         = @sbindir@
 libexecdir      = @libexecdir@
 mandir          = @mandir@
 sysconfdir      = @sysconfdir@
 datadir         = @datadir@
 includedir      = @includedir@
 localstatedir   = @localstatedir@
 runtimedir      = @runtimedir@
 logfiledir      = @logfiledir@
 proxycachedir   = @proxycachedir@

 libexecdir_relative   = @libexecdir_relative@

 #   suexec details (optional)
 suexec          = @suexec@
 suexec_caller   = @suexec_caller@
 suexec_userdir  = @suexec_userdir@
 suexec_uidmin   = @suexec_uidmin@
 suexec_gidmin   = @suexec_gidmin@
 suexec_safepath = @suexec_safepath@

 #   some substituted configuration parameters
 conf_group       = @conf_group@
 conf_port        = @conf_port@
 conf_serveradmin = @conf_serveradmin@
 conf_servername  = @conf_servername@

 #   usage of src/support stuff
 build-support     = @build_support@
 install-support   = @install_support@
 clean-support     = @clean_support@
 distclean-support = @distclean_support@

 #   forwarding arguments
 MFWD = root=$(root)

 ## ==================================================================
 ##                              Targets
 ## ==================================================================

 #   default target
 all: build

 ## ------------------------------------------------------------------
 ##                           Build Target
 ## ------------------------------------------------------------------

 #   build the package
 build:
 	@echo "===> $(SRC)"
 	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) build-std $(build-support)
 	@touch $(TOP)/$(SRC)/.apaci.build.ok
 	@echo "<=== $(SRC)"

 #   build the standard stuff
 build-std:
 	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ all

 #   build the additional support stuff
 build-support:
 	@echo "===> $(SRC)/support"; \
 	cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) all; \
 	if [ ".$(suexec)" = .1 ]; then \
 	    $(MAKE) $(MFLAGS) \
 		EXTRA_CFLAGS='\
 			-DHTTPD_USER=\"$(suexec_caller)\" \
 			-DUID_MIN=$(suexec_uidmin) \
 			-DGID_MIN=$(suexec_gidmin) \
 			-DUSERDIR_SUFFIX=\"$(suexec_userdir)\" \
 			-DLOG_EXEC=\"$(logfiledir)/suexec_log\" \
 			-DDOC_ROOT=\"$(datadir)/htdocs\" \
 			-DSAFE_PATH=\"$(suexec_safepath)\" \
 		' \
 		suexec; \
 	fi; \
 	echo "<=== $(SRC)/support"

 ## ------------------------------------------------------------------
 ##                       Installation Targets
 ## ------------------------------------------------------------------

 #   the install target for installing the complete Apache
 #   package. This is implemented by running subtargets for the
 #   separate parts of the installation process.
 install:
 	@if [ ! -f $(TOP)/$(SRC)/.apaci.build.ok ]; then \
 		$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) build; \
 	else \
 		:; \
 	fi
 	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) \
 		install-mktree install-programs $(install-support) \
 		install-include install-data install-config
 	-@$(RM) $(SRC)/.apaci.install.tmp
 	-@$(RM) $(SRC)/.apaci.install.conf
 	-@if [ ".$(QUIET)" != .1 ]; then \
 		echo "+--------------------------------------------------------+"; \
 		echo "| You now have successfully built and installed the      |"; \
 		echo "| Apache 1.3 HTTP server. To verify that Apache actually |"; \
 		echo "| works correctly you now should first check the         |"; \
 		echo "| (initially created or preserved) configuration files   |"; \
 		echo "|                                                        |"; \
 		echo "|   $(sysconfdir)/{httpd,access,srm}.conf"; \
 		echo "|                                                        |"; \
 		echo "| and then you should be able to immediately fire up     |"; \
 		echo "| Apache the first time by running:                      |"; \
 		echo "|                                                        |"; \
 		echo "|   $(sbindir)/apachectl start"; \
 		echo "|                                                        |"; \
 		echo "| Thanks for using Apache.       The Apache Group        |"; \
 		echo "|                                http://www.apache.org/  |"; \
 		echo "+--------------------------------------------------------+"; \
 	fi

 #   the non-verbose variant for package maintainers
 install-quiet:
 	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) QUIET=1 install

 #   create the installation tree
 install-mktree:
 	@echo "===> [mktree: Creating Apache installation tree]"
 	$(MKDIR) $(root)$(bindir)
 	$(MKDIR) $(root)$(sbindir)
 	$(MKDIR) $(root)$(libexecdir)
 	$(MKDIR) $(root)$(mandir)/man1
 	$(MKDIR) $(root)$(mandir)/man8
 	$(MKDIR) $(root)$(sysconfdir)
 	$(MKDIR) $(root)$(datadir)/htdocs
 	$(MKDIR) $(root)$(datadir)/icons
 	$(MKDIR) $(root)$(datadir)/cgi-bin
 	$(MKDIR) $(root)$(includedir)
 	$(MKDIR) $(root)$(runtimedir)
 	$(MKDIR) $(root)$(logfiledir)
 	$(MKDIR) $(root)$(proxycachedir)
 	@echo "<=== [mktree]"

 #   install the server program and optionally corresponding
 #   shared object files.
 install-programs:
 	@echo "===> [programs: Installing Apache httpd program and shared objects]"
 	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/httpd $(root)$(sbindir)/httpd
 	-@if [ ".`grep 'SUBTARGET=target_shared' $(TOP)/$(SRC)/Makefile`" != . ]; then \
 		SHLIB_SUFFIX_NAME="`grep '^SHLIB_SUFFIX_NAME=' $(TOP)/$(SRC)/Makefile | sed -e 's:^.*=::'`"; \
 		SHLIB_SUFFIX_LIST="`grep '^SHLIB_SUFFIX_LIST=' $(TOP)/$(SRC)/Makefile | sed -e 's:^.*=::'`"; \
 		echo "$(INSTALL_DSO) $(TOP)/$(SRC)/libhttpd.ep $(root)$(libexecdir)/libhttpd.ep"; \
 		$(INSTALL_DSO) $(TOP)/$(SRC)/libhttpd.ep $(root)$(libexecdir)/libhttpd.ep; \
 		echo "$(INSTALL_DSO) $(TOP)/$(SRC)/libhttpd.$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}"; \
 		$(INSTALL_DSO) $(TOP)/$(SRC)/libhttpd.$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}; \
 		if [ ".$${SHLIB_SUFFIX_LIST}" != . ]; then \
 			echo "$(RM) $(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}.*"; \
 			$(RM) $(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}.*; \
 			for suffix in $${SHLIB_SUFFIX_LIST} ""; do \
 				[ ".$${suffix}" = . ] && continue; \
 				echo "$(LN) $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}.$${suffix}"; \
 				$(LN) $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}.$${suffix}; \
 			done; \
 		fi; \
 	fi
 	$(INSTALL_DATA) $(TOP)/$(SRC)/support/httpd.8 $(root)$(mandir)/man8/httpd.8
 	-@$(RM) $(SRC)/.apaci.install.conf; touch $(SRC)/.apaci.install.conf
 	-@if [ ".`grep '^[ 	]*SharedModule' $(TOP)/$(SRC)/Configuration.apaci`" != . ]; then \
 		for mod in `egrep '^[ 	]*SharedModule' $(TOP)/$(SRC)/Configuration.apaci |\
 	                sed -e 's/^[ 	]*SharedModule[ 	]*//'`; do \
 			file=`echo $${mod} | sed -e 's;^.*/\([^/]*\);\1;'`; \
 			echo "$(INSTALL_DSO) $(TOP)/$(SRC)/$${mod} $(root)$(libexecdir)/$${file}"; \
 			$(INSTALL_DSO) $(TOP)/$(SRC)/$${mod} $(root)$(libexecdir)/$${file}; \
 			name=`$(TOP)/$(AUX)/fmn.sh $(TOP)/$(SRC)/$${mod}`; \
 			echo dummy | awk '{ printf("LoadModule %-18s %s\n", modname, modpath); }' \
 			modname="$${name}" modpath="$(libexecdir_relative)$${file}" >>$(SRC)/.apaci.install.conf; \
 		done; \
 		echo "" >>$(SRC)/.apaci.install.conf; \
 		echo "#  Reconstruction of the complete module list from all available modules" >>$(SRC)/.apaci.install.conf; \
 		echo "#  (static and shared ones) to achieve correct module execution order." >>$(SRC)/.apaci.install.conf; \
 		echo "#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]" >>$(SRC)/.apaci.install.conf; \
 		echo "ClearModuleList" >>$(SRC)/.apaci.install.conf; \
 		egrep "^[ 	]*(Add|Shared)Module" $(SRC)/Configuration.apaci |\
 		sed	-e 's:SharedModule:AddModule:' \
 			-e 's:modules/[^/]*/::' \
 			-e 's:[ 	]lib: mod_:' \
 			-e 's:\.[soa]*$$:.c:' >>$(SRC)/.apaci.install.conf; \
 	fi
 	@echo "<=== [programs]"

 #   install the support programs and scripts
 install-support:
 	@echo "===> [support: Installing Apache support programs and scripts]"
 	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/ab $(root)$(sbindir)/ab
 	$(INSTALL_DATA) $(TOP)/$(SRC)/support/ab.1 $(root)$(mandir)/man1/ab.1
 	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apachectl[*] $(root)$(sbindir)/apachectl"; \
 	sed -e 's;PIDFILE=.*;PIDFILE=$(runtimedir)/httpd.pid;' \
 		-e 's;HTTPD=.*;HTTPD=$(sbindir)/httpd;' \
 		< $(TOP)/$(SRC)/support/apachectl > $(TOP)/$(SRC)/.apaci.install.tmp && \
 		$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/apachectl
 	$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.1 $(root)$(mandir)/man1/apachectl.1
 	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htpasswd $(root)$(bindir)/htpasswd
 	$(INSTALL_DATA) $(TOP)/$(SRC)/support/htpasswd.1 $(root)$(mandir)/man1/htpasswd.1
 	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htdigest $(root)$(bindir)/htdigest
 	$(INSTALL_DATA) $(TOP)/$(SRC)/support/htdigest.1 $(root)$(mandir)/man1/htdigest.1
 	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/dbmmanage[*] $(root)$(bindir)/dbmmanage"; \
 	sed -e 's;^#!/.*;#!$(PERL);' \
 		< $(TOP)/$(SRC)/support/dbmmanage > $(TOP)/$(SRC)/.apaci.install.tmp && \
 		$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(bindir)/dbmmanage
 	$(INSTALL_DATA) $(TOP)/$(SRC)/support/dbmmanage.1 $(root)$(mandir)/man1/dbmmanage.1
 	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/logresolve $(root)$(sbindir)/logresolve
 	$(INSTALL_DATA) $(TOP)/$(SRC)/support/logresolve.8 $(root)$(mandir)/man8/logresolve.8
 	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/rotatelogs $(root)$(sbindir)/rotatelogs
 	$(INSTALL_DATA) $(TOP)/$(SRC)/support/rotatelogs.8 $(root)$(mandir)/man8/rotatelogs.8
 	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apxs[*] $(root)$(sbindir)/apxs"; \
 	sed -e 's;^#!/.*;#!$(PERL);' \
 		-e 's;\@prefix\@;$(prefix);' \
 		-e 's;\@sbindir\@;$(sbindir);' \
 		-e 's;\@libexecdir\@;$(libexecdir);' \
 		-e 's;\@includedir\@;$(includedir);' \
 		-e 's;\@sysconfdir\@;$(sysconfdir);' \
 		< $(TOP)/$(SRC)/support/apxs > $(TOP)/$(SRC)/.apaci.install.tmp && \
 		$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/apxs
 	$(INSTALL_DATA) $(TOP)/$(SRC)/support/apxs.8 $(root)$(mandir)/man8/apxs.8
 	-@if [ ".$(suexec)" = .1 ]; then \
 	    echo "$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec"; \
 	    $(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec; \
 	    echo "chown root $(root)$(sbindir)/suexec"; \
 	    chown root $(root)$(sbindir)/suexec; \
 	    echo "chmod 4711 $(root)$(sbindir)/suexec"; \
 	    chmod 4711 $(root)$(sbindir)/suexec; \
 	    echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8"; \
 	    $(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8; \
 	fi
 	@echo "<=== [support]"

 #   install the Apache C header files
 install-include:
 	@echo "===> [include: Installing Apache C header files]"
 	$(CP) $(TOP)/$(SRC)/include/*.h $(root)$(includedir)/
 	@osdir=`grep '^OSDIR=' $(TOP)/$(SRC)/Makefile.config | sed -e 's:^OSDIR=.*/os:os:'`; \
 		echo "$(CP) $(TOP)/$(SRC)/$${osdir}/os.h $(root)$(includedir)/"; \
 		$(CP) $(TOP)/$(SRC)/$${osdir}/os.h $(root)$(includedir)/
 	chmod 644 $(root)$(includedir)/*.h
 	@echo "<=== [include]"

 #   create an initial document root containing the Apache manual,
 #   icons and distributed CGI scripts.
 install-data:
 	@echo "===> [data: Installing initial data files]"
 	-@if [ -f $(root)$(datadir)/htdocs/index.html ]; then \
 		echo "[PRESERVING EXISTING DATA SUBDIR: $(root)$(datadir)/htdocs/]"; \
 	else \
 		echo "Copying tree $(TOP)/htdocs/ -> $(root)$(datadir)/htdocs/"; \
 		(cd $(TOP)/htdocs/ && $(TAR) cf - *) |\
 		(cd $(root)$(datadir)/htdocs/ && $(TAR) xf -); \
 		find $(root)$(datadir)/htdocs/ -type d -exec chmod a+rx {} \; ; \
 		find $(root)$(datadir)/htdocs/ -type f -exec chmod a+r {} \; ; \
 	fi
 	-@if [ -f $(root)$(datadir)/cgi-bin/printenv ]; then \
 		echo "[PRESERVING EXISTING DATA SUBDIR: $(root)$(datadir)/cgi-bin/]"; \
 	else \
 		for script in printenv test-cgi; do \
 			cat $(TOP)/cgi-bin/$${script} |\
 			sed -e 's;^#!/.*perl;#!$(PERL);' \
         		> $(TOP)/$(SRC)/.apaci.install.tmp; \
 			echo "$(INSTALL_DATA) $(TOP)/conf/$${script}[*] $(root)$(datadir)/cgi-bin/$${script}"; \
 			$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(datadir)/cgi-bin/$${script}; \
 		done; \
 	fi
 	@echo "Copying tree $(TOP)/icons/ -> $(root)$(datadir)/icons/"; \
 	(cd $(TOP)/icons/ && $(TAR) cf - *) |\
 	(cd $(root)$(datadir)/icons/ && $(TAR) xf -); \
 	find $(root)$(datadir)/icons/ -type d -exec chmod a+rx {} \; ;\
 	find $(root)$(datadir)/icons/ -type f -exec chmod a+r {} \;
 	@echo "<=== [data]"

 #   create the initial configuration by providing default files
 #   and initial config files while preserving existing ones.
 install-config:
 	@echo "===> [config: Installing Apache configuration files]"
 	-@for conf in httpd.conf access.conf srm.conf; do \
 		(echo "##"; \
 		 echo "## $${conf} -- Apache HTTP server configuration file"; \
 		 echo "##"; \
 		 echo ""; \
 		 cat $(TOP)/conf/$${conf}-dist ) |\
 		 sed -e '/# LoadModule/r $(TOP)/$(SRC)/.apaci.install.conf' \
 			-e 's;@@ServerRoot@@/htdocs;$(datadir)/htdocs;' \
 			-e 's;@@ServerRoot@@/icons;$(datadir)/icons;' \
 			-e 's;@@ServerRoot@@/cgi-bin;$(datadir)/cgi-bin;' \
 			-e 's;@@ServerRoot@@/proxy;$(proxycachedir);' \
 			-e 's;@@ServerRoot@@;$(prefix);' \
 			-e 's;logs/accept.lock;$(runtimedir)/httpd.lock;' \
 			-e 's;logs/apache_runtime_status;$(runtimedir)/httpd.scoreboard;' \
 			-e 's;logs/httpd.pid;$(runtimedir)/httpd.pid;' \
 			-e 's;logs/access_log;$(logfiledir)/access_log;' \
 			-e 's;logs/error_log;$(logfiledir)/error_log;' \
 			-e 's;logs/referer_log;$(logfiledir)/referer_log;' \
 			-e 's;logs/agent_log;$(logfiledir)/agent_log;' \
 			-e 's;conf/magic;$(sysconfdir)/magic;' \
 			-e 's;conf/mime.types;$(sysconfdir)/mime.types;' \
 			-e 's;Group #-1;Group $(conf_group);' \
 			-e 's;Port 80;Port $(conf_port);' \
 			-e 's;ServerAdmin you@your.address;ServerAdmin $(conf_serveradmin);' \
 			-e 's;ServerName new.host.name;ServerName $(conf_servername);' \
         	> $(TOP)/$(SRC)/.apaci.install.tmp && \
 		echo "$(INSTALL_DATA) $(TOP)/conf/$${conf}-dist[*] $(root)$(sysconfdir)/$${conf}.default"; \
 		$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sysconfdir)/$${conf}.default; \
 		if [ ! -f "$(root)$(sysconfdir)/$${conf}" ]; then \
 			echo "$(INSTALL_DATA) $(TOP)/conf/$${conf}-dist[*] $(root)$(sysconfdir)/$${conf}"; \
 			$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sysconfdir)/$${conf}; \
 		else \
 			echo "[PRESERVING EXISTING CONFIG FILE: $(root)$(sysconfdir)/$${conf}]"; \
 		fi; \
 	done
 	-@for conf in mime.types magic; do \
 		echo "$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}.default"; \
 		$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}.default; \
 		if [ ! -f "$(root)$(sysconfdir)/$${conf}" ]; then \
 			echo "$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}"; \
 			$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}; \
 		else \
 			echo "[PRESERVING EXISTING CONFIG FILE: $(root)$(sysconfdir)/$${conf}]"; \
 		fi; \
 	done
 	@echo "<=== [config]"


 ## ------------------------------------------------------------------
 ##                       Cleanup Targets
 ## ------------------------------------------------------------------

 #   cleanup the source tree by removing anything which was
 #   created by the build target
 clean:
 	@echo "===> $(SRC)"
 	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) clean-std $(clean-support)
 	@echo "<=== $(SRC)"
 	@$(RM) $(TOP)/$(SRC)/.apaci.build.ok

 #   clean the standard stuff
 clean-std:
 	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ clean

 #   clean additional support stuff
 clean-support:
 	@echo "===> $(SRC)/support"; \
 	cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) clean; \
 	if [ ".$(suexec)" = .1 ]; then \
 		echo "$(RM) suexec"; \
 		$(RM) suexec; \
 	fi; \
 	echo "<=== $(SRC)/support"

 #   cleanup the source tree by removing anything which was
 #   created by the configure step and the build target.
 #   When --shadow is used we just remove the complete shadow tree.
 distclean:
 	@if [ ".$(SRC)" = .src ]; then \
 		$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) distclean-normal; \
 	else \
 		$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) distclean-shadow; \
 	fi

 distclean-normal:
 	@echo "===> $(SRC)"
 	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) distclean-std $(distclean-support)
 	@echo "<=== $(SRC)"
 	-$(RM) $(SRC)/Configuration.apaci
 	-$(RM) $(SRC)/apaci
 	@$(RM) $(SRC)/.apaci.build.ok
 	-$(RM) Makefile
 	-$(RM) config.status

 #   clean the standard stuff
 distclean-std:
 	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ distclean

 distclean-support:
 	@echo "===> $(SRC)/support"; \
 	cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) distclean; \
 	if [ ".$(suexec)" = .1 ]; then \
 	    echo "$(RM) suexec"; \
 	    $(RM) suexec; \
 	fi; \
 	echo "<=== $(SRC)/support"

 distclean-shadow:
 	$(RM) -r $(SRC)
 	$(RM) $(MKF)
 	-@if [ ".`ls $(TOP)/src.* 2>/dev/null`" = . ]; then \
 		echo "$(RM) Makefile"; \
 		$(RM) Makefile; \
 	fi
	## ====================================================================
	## Copyright (c) 1998 The Apache Group. All rights reserved.
	##
	## Redistribution and use in source and binary forms, with or without
	## modification, are permitted provided that the following conditions
	## are met:
	##
	## 1. Redistributions of source code must retain the above copyright
	## notice, this list of conditions and the following disclaimer.
	##
	## 2. Redistributions in binary form must reproduce the above copyright
	## notice, this list of conditions and the following disclaimer in
	## the documentation and/or other materials provided with the
	## distribution.
	##
	## 3. All advertising materials mentioning features or use of this
	## software must display the following acknowledgment:
	## "This product includes software developed by the Apache Group
	## for use in the Apache HTTP server project (http://www.apache.org/)."
	##
	## 4. The names "Apache Server" and "Apache Group" must not be used to
	## endorse or promote products derived from this software without
	## prior written permission. For written permission, please contact
	## apache@apache.org.
	##
	## 5. Products derived from this software may not be called "Apache"
	## nor may "Apache" appear in their names without prior written
	## permission of the Apache Group.
	##
	## 6. Redistributions of any form whatsoever must retain the following
	## acknowledgment:
	## "This product includes software developed by the Apache Group
	## for use in the Apache HTTP server project (http://www.apache.org/)."
	##
	## THIS SOFTWARE IS PROVIDED BY THE APACHE GROUP ``AS IS'' AND ANY
	## EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
	## PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE GROUP OR
	## ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
	## NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	## LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
	## STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
	## OF THE POSSIBILITY OF SUCH DAMAGE.
	## ====================================================================
	##
	## This software consists of voluntary contributions made by many
	## individuals on behalf of the Apache Group and was originally based
	## on public domain software written at the National Center for
	## Supercomputing Applications, University of Illinois, Urbana-Champaign.
	## For more information on the Apache Group and the Apache HTTP server
	## project, please see <http://www.apache.org/>.
	##

	##
	## Makefile -- Apache Autoconf-style Interface (APACI)
	## top-level control Makefile for out-of-the-box
	## build and installation procedure.
	##
	## Written by Ralf S. Engelschall <rse@apache.org>
	##

	## ==================================================================
	## Options
	## ==================================================================

	# safe environment
	SHELL = /bin/sh

	# paths to the source tree parts
	TOP = @TOP@
	SRC = @SRC@
	MKF = @MKF@
	AUX = @AUX@

	# build tools
	CP = cp
	LN = ln
	RM = rm -f
	TAR = tar
	MKDIR = $(TOP)/$(AUX)/mkdir.sh
	INSTALL = $(TOP)/$(AUX)/install.sh -c
	INSTALL_PROGRAM = $(INSTALL) -s -m 755
	INSTALL_DSO = $(INSTALL) -m 755
	INSTALL_SCRIPT = $(INSTALL) -m 755
	INSTALL_DATA = $(INSTALL) -m 644
	PERL = @PERL@

	# installation root
	# (overrideable by package maintainers for
	# rolling packages without bristling the system)
	root =

	# installation paths
	prefix = @prefix@
	exec_prefix = @exec_prefix@
	bindir = @bindir@
	sbindir = @sbindir@
	libexecdir = @libexecdir@
	mandir = @mandir@
	sysconfdir = @sysconfdir@
	datadir = @datadir@
	includedir = @includedir@
	localstatedir = @localstatedir@
	runtimedir = @runtimedir@
	logfiledir = @logfiledir@
	proxycachedir = @proxycachedir@

	libexecdir_relative = @libexecdir_relative@

	# suexec details (optional)
	suexec = @suexec@
	suexec_caller = @suexec_caller@
	suexec_userdir = @suexec_userdir@
	suexec_uidmin = @suexec_uidmin@
	suexec_gidmin = @suexec_gidmin@
	suexec_safepath = @suexec_safepath@

	# some substituted configuration parameters
	conf_group = @conf_group@
	conf_port = @conf_port@
	conf_serveradmin = @conf_serveradmin@
	conf_servername = @conf_servername@

	# usage of src/support stuff
	build-support = @build_support@
	install-support = @install_support@
	clean-support = @clean_support@
	distclean-support = @distclean_support@

	# forwarding arguments
	MFWD = root=$(root)

	## ==================================================================
	## Targets
	## ==================================================================

	# default target
	all: build

	## ------------------------------------------------------------------
	## Build Target
	## ------------------------------------------------------------------

	# build the package
	build:
	@echo "===> $(SRC)"
	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) build-std $(build-support)
	@touch $(TOP)/$(SRC)/.apaci.build.ok
	@echo "<=== $(SRC)"

	# build the standard stuff
	build-std:
	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ all

	# build the additional support stuff
	build-support:
	@echo "===> $(SRC)/support"; \
	cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) all; \
	if [ ".$(suexec)" = .1 ]; then \
	$(MAKE) $(MFLAGS) \
	EXTRA_CFLAGS='\
	-DHTTPD_USER=\"$(suexec_caller)\" \
	-DUID_MIN=$(suexec_uidmin) \
	-DGID_MIN=$(suexec_gidmin) \
	-DUSERDIR_SUFFIX=\"$(suexec_userdir)\" \
	-DLOG_EXEC=\"$(logfiledir)/suexec_log\" \
	-DDOC_ROOT=\"$(datadir)/htdocs\" \
	-DSAFE_PATH=\"$(suexec_safepath)\" \
	' \
	suexec; \
	fi; \
	echo "<=== $(SRC)/support"

	## ------------------------------------------------------------------
	## Installation Targets
	## ------------------------------------------------------------------

	# the install target for installing the complete Apache
	# package. This is implemented by running subtargets for the
	# separate parts of the installation process.
	install:
	@if [ ! -f $(TOP)/$(SRC)/.apaci.build.ok ]; then \
	$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) build; \
	else \
	:; \
	fi
	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) \
	install-mktree install-programs $(install-support) \
	install-include install-data install-config
	-@$(RM) $(SRC)/.apaci.install.tmp
	-@$(RM) $(SRC)/.apaci.install.conf
	-@if [ ".$(QUIET)" != .1 ]; then \
	echo "+--------------------------------------------------------+"; \
	echo "\| You now have successfully built and installed the \|"; \
	echo "\| Apache 1.3 HTTP server. To verify that Apache actually \|"; \
	echo "\| works correctly you now should first check the \|"; \
	echo "\| (initially created or preserved) configuration files \|"; \
	echo "\| \|"; \
	echo "\| $(sysconfdir)/{httpd,access,srm}.conf"; \
	echo "\| \|"; \
	echo "\| and then you should be able to immediately fire up \|"; \
	echo "\| Apache the first time by running: \|"; \
	echo "\| \|"; \
	echo "\| $(sbindir)/apachectl start"; \
	echo "\| \|"; \
	echo "\| Thanks for using Apache. The Apache Group \|"; \
	echo "\| http://www.apache.org/ \|"; \
	echo "+--------------------------------------------------------+"; \
	fi

	# the non-verbose variant for package maintainers
	install-quiet:
	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) QUIET=1 install

	# create the installation tree
	install-mktree:
	@echo "===> [mktree: Creating Apache installation tree]"
	$(MKDIR) $(root)$(bindir)
	$(MKDIR) $(root)$(sbindir)
	$(MKDIR) $(root)$(libexecdir)
	$(MKDIR) $(root)$(mandir)/man1
	$(MKDIR) $(root)$(mandir)/man8
	$(MKDIR) $(root)$(sysconfdir)
	$(MKDIR) $(root)$(datadir)/htdocs
	$(MKDIR) $(root)$(datadir)/icons
	$(MKDIR) $(root)$(datadir)/cgi-bin
	$(MKDIR) $(root)$(includedir)
	$(MKDIR) $(root)$(runtimedir)
	$(MKDIR) $(root)$(logfiledir)
	$(MKDIR) $(root)$(proxycachedir)
	@echo "<=== [mktree]"

	# install the server program and optionally corresponding
	# shared object files.
	install-programs:
	@echo "===> [programs: Installing Apache httpd program and shared objects]"
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/httpd $(root)$(sbindir)/httpd
	-@if [ ".`grep 'SUBTARGET=target_shared' $(TOP)/$(SRC)/Makefile`" != . ]; then \
	SHLIB_SUFFIX_NAME="`grep '^SHLIB_SUFFIX_NAME=' $(TOP)/$(SRC)/Makefile \| sed -e 's:^.*=::'`"; \
	SHLIB_SUFFIX_LIST="`grep '^SHLIB_SUFFIX_LIST=' $(TOP)/$(SRC)/Makefile \| sed -e 's:^.*=::'`"; \
	echo "$(INSTALL_DSO) $(TOP)/$(SRC)/libhttpd.ep $(root)$(libexecdir)/libhttpd.ep"; \
	$(INSTALL_DSO) $(TOP)/$(SRC)/libhttpd.ep $(root)$(libexecdir)/libhttpd.ep; \
	echo "$(INSTALL_DSO) $(TOP)/$(SRC)/libhttpd.$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}"; \
	$(INSTALL_DSO) $(TOP)/$(SRC)/libhttpd.$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}; \
	if [ ".$${SHLIB_SUFFIX_LIST}" != . ]; then \
	echo "$(RM) $(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}.*"; \
	$(RM) $(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}.*; \
	for suffix in $${SHLIB_SUFFIX_LIST} ""; do \
	[ ".$${suffix}" = . ] && continue; \
	echo "$(LN) $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}.$${suffix}"; \
	$(LN) $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/libhttpd.$${SHLIB_SUFFIX_NAME}.$${suffix}; \
	done; \
	fi; \
	fi
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/httpd.8 $(root)$(mandir)/man8/httpd.8
	-@$(RM) $(SRC)/.apaci.install.conf; touch $(SRC)/.apaci.install.conf
	-@if [ ".`grep '^[ ]*SharedModule' $(TOP)/$(SRC)/Configuration.apaci`" != . ]; then \
	for mod in `egrep '^[ ]*SharedModule' $(TOP)/$(SRC)/Configuration.apaci \|\
	sed -e 's/^[ ]SharedModule[ ]//'`; do \
	file=`echo $${mod} \| sed -e 's;^./\([^/]\);\1;'`; \
	echo "$(INSTALL_DSO) $(TOP)/$(SRC)/$${mod} $(root)$(libexecdir)/$${file}"; \
	$(INSTALL_DSO) $(TOP)/$(SRC)/$${mod} $(root)$(libexecdir)/$${file}; \
	name=`$(TOP)/$(AUX)/fmn.sh $(TOP)/$(SRC)/$${mod}`; \
	echo dummy \| awk '{ printf("LoadModule %-18s %s\n", modname, modpath); }' \
	modname="$${name}" modpath="$(libexecdir_relative)$${file}" >>$(SRC)/.apaci.install.conf; \
	done; \
	echo "" >>$(SRC)/.apaci.install.conf; \
	echo "# Reconstruction of the complete module list from all available modules" >>$(SRC)/.apaci.install.conf; \
	echo "# (static and shared ones) to achieve correct module execution order." >>$(SRC)/.apaci.install.conf; \
	echo "# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]" >>$(SRC)/.apaci.install.conf; \
	echo "ClearModuleList" >>$(SRC)/.apaci.install.conf; \
	egrep "^[ ]*(Add\|Shared)Module" $(SRC)/Configuration.apaci \|\
	sed -e 's:SharedModule:AddModule:' \
	-e 's:modules/[^/]*/::' \
	-e 's:[ ]lib: mod_:' \
	-e 's:\.[soa]*$$:.c:' >>$(SRC)/.apaci.install.conf; \
	fi
	@echo "<=== [programs]"

	# install the support programs and scripts
	install-support:
	@echo "===> [support: Installing Apache support programs and scripts]"
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/ab $(root)$(sbindir)/ab
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/ab.1 $(root)$(mandir)/man1/ab.1
	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apachectl[*] $(root)$(sbindir)/apachectl"; \
	sed -e 's;PIDFILE=.*;PIDFILE=$(runtimedir)/httpd.pid;' \
	-e 's;HTTPD=.*;HTTPD=$(sbindir)/httpd;' \
	< $(TOP)/$(SRC)/support/apachectl > $(TOP)/$(SRC)/.apaci.install.tmp && \
	$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/apachectl
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.1 $(root)$(mandir)/man1/apachectl.1
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htpasswd $(root)$(bindir)/htpasswd
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/htpasswd.1 $(root)$(mandir)/man1/htpasswd.1
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htdigest $(root)$(bindir)/htdigest
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/htdigest.1 $(root)$(mandir)/man1/htdigest.1
	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/dbmmanage[*] $(root)$(bindir)/dbmmanage"; \
	sed -e 's;^#!/.*;#!$(PERL);' \
	< $(TOP)/$(SRC)/support/dbmmanage > $(TOP)/$(SRC)/.apaci.install.tmp && \
	$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(bindir)/dbmmanage
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/dbmmanage.1 $(root)$(mandir)/man1/dbmmanage.1
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/logresolve $(root)$(sbindir)/logresolve
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/logresolve.8 $(root)$(mandir)/man8/logresolve.8
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/rotatelogs $(root)$(sbindir)/rotatelogs
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/rotatelogs.8 $(root)$(mandir)/man8/rotatelogs.8
	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apxs[*] $(root)$(sbindir)/apxs"; \
	sed -e 's;^#!/.*;#!$(PERL);' \
	-e 's;\@prefix\@;$(prefix);' \
	-e 's;\@sbindir\@;$(sbindir);' \
	-e 's;\@libexecdir\@;$(libexecdir);' \
	-e 's;\@includedir\@;$(includedir);' \
	-e 's;\@sysconfdir\@;$(sysconfdir);' \
	< $(TOP)/$(SRC)/support/apxs > $(TOP)/$(SRC)/.apaci.install.tmp && \
	$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/apxs
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/apxs.8 $(root)$(mandir)/man8/apxs.8
	-@if [ ".$(suexec)" = .1 ]; then \
	echo "$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec"; \
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec; \
	echo "chown root $(root)$(sbindir)/suexec"; \
	chown root $(root)$(sbindir)/suexec; \
	echo "chmod 4711 $(root)$(sbindir)/suexec"; \
	chmod 4711 $(root)$(sbindir)/suexec; \
	echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8"; \
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8; \
	fi
	@echo "<=== [support]"

	# install the Apache C header files
	install-include:
	@echo "===> [include: Installing Apache C header files]"
	$(CP) $(TOP)/$(SRC)/include/*.h $(root)$(includedir)/
	@osdir=`grep '^OSDIR=' $(TOP)/$(SRC)/Makefile.config \| sed -e 's:^OSDIR=.*/os:os:'`; \
	echo "$(CP) $(TOP)/$(SRC)/$${osdir}/os.h $(root)$(includedir)/"; \
	$(CP) $(TOP)/$(SRC)/$${osdir}/os.h $(root)$(includedir)/
	chmod 644 $(root)$(includedir)/*.h
	@echo "<=== [include]"

	# create an initial document root containing the Apache manual,
	# icons and distributed CGI scripts.
	install-data:
	@echo "===> [data: Installing initial data files]"
	-@if [ -f $(root)$(datadir)/htdocs/index.html ]; then \
	echo "[PRESERVING EXISTING DATA SUBDIR: $(root)$(datadir)/htdocs/]"; \
	else \
	echo "Copying tree $(TOP)/htdocs/ -> $(root)$(datadir)/htdocs/"; \
	(cd $(TOP)/htdocs/ && $(TAR) cf - *) \|\
	(cd $(root)$(datadir)/htdocs/ && $(TAR) xf -); \
	find $(root)$(datadir)/htdocs/ -type d -exec chmod a+rx {} \; ; \
	find $(root)$(datadir)/htdocs/ -type f -exec chmod a+r {} \; ; \
	fi
	-@if [ -f $(root)$(datadir)/cgi-bin/printenv ]; then \
	echo "[PRESERVING EXISTING DATA SUBDIR: $(root)$(datadir)/cgi-bin/]"; \
	else \
	for script in printenv test-cgi; do \
	cat $(TOP)/cgi-bin/$${script} \|\
	sed -e 's;^#!/.*perl;#!$(PERL);' \
	> $(TOP)/$(SRC)/.apaci.install.tmp; \
	echo "$(INSTALL_DATA) $(TOP)/conf/$${script}[*] $(root)$(datadir)/cgi-bin/$${script}"; \
	$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(datadir)/cgi-bin/$${script}; \
	done; \
	fi
	@echo "Copying tree $(TOP)/icons/ -> $(root)$(datadir)/icons/"; \
	(cd $(TOP)/icons/ && $(TAR) cf - *) \|\
	(cd $(root)$(datadir)/icons/ && $(TAR) xf -); \
	find $(root)$(datadir)/icons/ -type d -exec chmod a+rx {} \; ;\
	find $(root)$(datadir)/icons/ -type f -exec chmod a+r {} \;
	@echo "<=== [data]"

	# create the initial configuration by providing default files
	# and initial config files while preserving existing ones.
	install-config:
	@echo "===> [config: Installing Apache configuration files]"
	-@for conf in httpd.conf access.conf srm.conf; do \
	(echo "##"; \
	echo "## $${conf} -- Apache HTTP server configuration file"; \
	echo "##"; \
	echo ""; \
	cat $(TOP)/conf/$${conf}-dist ) \|\
	sed -e '/# LoadModule/r $(TOP)/$(SRC)/.apaci.install.conf' \
	-e 's;@@ServerRoot@@/htdocs;$(datadir)/htdocs;' \
	-e 's;@@ServerRoot@@/icons;$(datadir)/icons;' \
	-e 's;@@ServerRoot@@/cgi-bin;$(datadir)/cgi-bin;' \
	-e 's;@@ServerRoot@@/proxy;$(proxycachedir);' \
	-e 's;@@ServerRoot@@;$(prefix);' \
	-e 's;logs/accept.lock;$(runtimedir)/httpd.lock;' \
	-e 's;logs/apache_runtime_status;$(runtimedir)/httpd.scoreboard;' \
	-e 's;logs/httpd.pid;$(runtimedir)/httpd.pid;' \
	-e 's;logs/access_log;$(logfiledir)/access_log;' \
	-e 's;logs/error_log;$(logfiledir)/error_log;' \
	-e 's;logs/referer_log;$(logfiledir)/referer_log;' \
	-e 's;logs/agent_log;$(logfiledir)/agent_log;' \
	-e 's;conf/magic;$(sysconfdir)/magic;' \
	-e 's;conf/mime.types;$(sysconfdir)/mime.types;' \
	-e 's;Group #-1;Group $(conf_group);' \
	-e 's;Port 80;Port $(conf_port);' \
	-e 's;ServerAdmin you@your.address;ServerAdmin $(conf_serveradmin);' \
	-e 's;ServerName new.host.name;ServerName $(conf_servername);' \
	> $(TOP)/$(SRC)/.apaci.install.tmp && \
	echo "$(INSTALL_DATA) $(TOP)/conf/$${conf}-dist[*] $(root)$(sysconfdir)/$${conf}.default"; \
	$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sysconfdir)/$${conf}.default; \
	if [ ! -f "$(root)$(sysconfdir)/$${conf}" ]; then \
	echo "$(INSTALL_DATA) $(TOP)/conf/$${conf}-dist[*] $(root)$(sysconfdir)/$${conf}"; \
	$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sysconfdir)/$${conf}; \
	else \
	echo "[PRESERVING EXISTING CONFIG FILE: $(root)$(sysconfdir)/$${conf}]"; \
	fi; \
	done
	-@for conf in mime.types magic; do \
	echo "$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}.default"; \
	$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}.default; \
	if [ ! -f "$(root)$(sysconfdir)/$${conf}" ]; then \
	echo "$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}"; \
	$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}; \
	else \
	echo "[PRESERVING EXISTING CONFIG FILE: $(root)$(sysconfdir)/$${conf}]"; \
	fi; \
	done
	@echo "<=== [config]"


	## ------------------------------------------------------------------
	## Cleanup Targets
	## ------------------------------------------------------------------

	# cleanup the source tree by removing anything which was
	# created by the build target
	clean:
	@echo "===> $(SRC)"
	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) clean-std $(clean-support)
	@echo "<=== $(SRC)"
	@$(RM) $(TOP)/$(SRC)/.apaci.build.ok

	# clean the standard stuff
	clean-std:
	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ clean

	# clean additional support stuff
	clean-support:
	@echo "===> $(SRC)/support"; \
	cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) clean; \
	if [ ".$(suexec)" = .1 ]; then \
	echo "$(RM) suexec"; \
	$(RM) suexec; \
	fi; \
	echo "<=== $(SRC)/support"

	# cleanup the source tree by removing anything which was
	# created by the configure step and the build target.
	# When --shadow is used we just remove the complete shadow tree.
	distclean:
	@if [ ".$(SRC)" = .src ]; then \
	$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) distclean-normal; \
	else \
	$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) distclean-shadow; \
	fi

	distclean-normal:
	@echo "===> $(SRC)"
	@$(MAKE) -f $(MKF) $(MFLAGS) $(MFWD) distclean-std $(distclean-support)
	@echo "<=== $(SRC)"
	-$(RM) $(SRC)/Configuration.apaci
	-$(RM) $(SRC)/apaci
	@$(RM) $(SRC)/.apaci.build.ok
	-$(RM) Makefile
	-$(RM) config.status

	# clean the standard stuff
	distclean-std:
	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ distclean

	distclean-support:
	@echo "===> $(SRC)/support"; \
	cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) distclean; \
	if [ ".$(suexec)" = .1 ]; then \
	echo "$(RM) suexec"; \
	$(RM) suexec; \
	fi; \
	echo "<=== $(SRC)/support"

	distclean-shadow:
	$(RM) -r $(SRC)
	$(RM) $(MKF)
	-@if [ ".`ls $(TOP)/src.* 2>/dev/null`" = . ]; then \
	echo "$(RM) Makefile"; \
	$(RM) Makefile; \
	fi