docs/manual/mod/mod_privileges.xml

<?xml version="1.0"?>
<!DOCTYPE modulesynopsis SYSTEM "../style/modulesynopsis.dtd">
<?xml-stylesheet type="text/xsl" href="../style/manual.en.xsl"?>
<!-- $LastChangedRevision$ -->

<!--
 Licensed to the Apache Software Foundation (ASF) under one or more
 contributor license agreements.  See the NOTICE file distributed with
 this work for additional information regarding copyright ownership.
 The ASF licenses this file to You under the Apache License, Version 2.0
 (the "License"); you may not use this file except in compliance with
 the License.  You may obtain a copy of the License at

     http://www.apache.org/licenses/LICENSE-2.0

 Unless required by applicable law or agreed to in writing, software
 distributed under the License is distributed on an "AS IS" BASIS,
 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and
 limitations under the License.
-->

<modulesynopsis metafile="mod_privileges.xml.meta">

<name>mod_privileges</name>
<description>Support for Solaris privileges and for running virtual hosts
under different user IDs.</description>
<status>Experimental</status>
<sourcefile>mod_privileges.c</sourcefile>
<identifier>privileges_module</identifier>
<compatibility>Available in Apache 2.3 and up, on Solaris 10 and
OpenSolaris platforms</compatibility>

<summary>
<p>This module enables different Virtual Hosts to run with different
Unix <var>User</var> and <var>Group</var> IDs, and with different
<a href="http://sosc-dr.sun.com/bigadmin/features/articles/least_privilege.jsp"
>Solaris Privileges</a>.  In particular, it offers a solution to the
problem of privilege separation between different Virtual Hosts, first
promised by the abandoned perchild MPM.  It also offers other security
enhancements.</p>

<p>Unlike perchild, <module>mod_privileges</module>
is not itself an MPM.  It works <em>within</em> a processing model to
set privileges and User/Group <em>per request</em> in a running process.
It is therefore not compatible with a threaded MPM, and will refuse
to run under one.</p>

<p><module>mod_privileges</module> raises security issues similar to
those of <a href="../suexec.html">suexec</a>.  But unlike suexec,
it applies not only to CGI programs but to the entire request processing
cycle, including in-process applications and subprocesses.
It is ideally suited to running PHP applications under <strong>mod_php</strong>,
which is also incompatible with threaded MPMs.  It is also well-suited
to other in-process scripting applications such as <strong>mod_perl</strong>,
<strong>mod_python</strong>, and <strong>mod_ruby</strong>, and to
applications implemented in C as apache modules where privilege
separation is an issue.</p>

</summary>

<section id="security"><title>Security Considerations</title>

<p><module>mod_privileges</module> introduces new security concerns
in situations where <strong>untrusted code</strong> may be run
<strong>within the webserver process</strong>.  This applies to
untrusted modules, and scripts running under modules such as
mod_php or mod_perl.  Scripts running externally (e.g. as CGI
or in an appserver behind mod_proxy or mod_jk) are NOT affected.</p>

<p>The basic security concerns with mod_privileges are:</p>
<ul><li>Running as a system user introduces the same security issues
    as mod_suexec, and near-equivalents such as cgiwrap and suphp.</li>
<li>A privileges-aware malicious user extension (module or script)
    could escalate its privileges to anything available to the
    httpd process in any virtual host.  This introduces new risks
    if (and only if) mod_privileges is compiled with the
    <var>BIG_SECURITY_HOLE</var> option.</li>
<li>A privileges-aware malicious user extension (module or script)
    could escalate privileges to set its user ID to another system
    user (and/or group).</li>
</ul>

<p>The <directive>PrivilegesMode</directive> directive allows you to
select either <var>FAST</var> or <var>SECURE</var> mode.  You can
mix modes, using <var>FAST</var> mode for trusted users and
fully-audited code paths, while imposing SECURE mode where an
untrusted user has scope to introduce code.</p>
<p>Before describing the modes, we should also introduce the target
use cases: Benign vs Hostile.  In a benign situation, you want to
separate users for their convenience, and protect them and the server
against the risks posed by honest mistakes, but you trust your users
are not deliberately subverting system security.  In a hostile
situation - e.g. commercial hosting - you may have users deliberately
attacking the system or each other.</p>
<dl>
<dt>FAST mode</dt>
<dd>In <var>FAST</var> mode, requests are run in-process with the
selected uid/gid and privileges, so the overhead is negligible.
This is suitable for benign situations, but is not secure against an
attacker escalating privileges with an in-process module or script.</dd>
<dt>SECURE mode</dt>
<dd>A request in <var>SECURE</var> mode forks a subprocess, which
then drops privileges.  This is a very similar case to running CGI
with suexec, but for the entire request cycle, and with the benefit
of fine-grained control of privileges.</dd>
</dl>
<p>You can select different <directive>PrivilegesMode</directive>s for
each virtual host, and even in a directory context within a virtual
host.  <var>FAST</var> mode is appropriate where the user(s) are
trusted and/or have no privilege to load in-process code.
<var>SECURE</var> mode is appropriate to cases where untrusted code
might be run in-process.  However, even in <var>SECURE</var> mode,
there is no protection against a malicious user who is able to
introduce privileges-aware code running <em>before the start of the
request-processing cycle.</em></p>

</section>
<directivesynopsis>
<name>PrivilegesMode</name>
<description>Trade off processing speed and efficiency vs security against
malicious privileges-aware code.</description>
<syntax>PrivilegesMode FAST|SECURE|SELECTIVE</syntax>
<default>PrivilegesMode FAST</default>
<contextlist>
	<context>server config</context>
	<context>virtual host</context>
	<context>directory</context>
</contextlist>
<compatibility>Available on Solaris 10 and OpenSolaris with
non-threaded MPMs (<module>prefork</module> or custom MPM).</compatibility>
<usage><p>This directive trades off performance vs security against
malicious, privileges-aware code.  In <var>SECURE</var> mode, each request
runs in a secure subprocess, incurring a substantial performance penalty.
In <var>FAST</var> mode, the server is not protected against escalation
of privileges as discussed above.</p>
<p>This directive differs slightly between a <code>&lt;Directory&gt;</code>
	context (including equivalents such as Location/Files/If) and a
	top-level or <code>&lt;VirtualHost&gt;</code>.</p>
<p>At top-level, it sets a default that will be inherited by virtualhosts.
	In a virtual host, FAST or SECURE mode acts on the entire
	HTTP request, and any settings in a <code>&lt;Directory&gt;</code>
	context will be <strong>ignored</strong>.  A third pseudo-mode
	SELECTIVE defers the choice of FAST vs SECURE to directives in a
	<code>&lt;Directory&gt;</code> context.</p>
<p>In a <code>&lt;Directory&gt;</code> context, it is applicable only
	where SELECTIVE mode was set for the VirtualHost.  Only
	FAST or SECURE can be set in this context (SELECTIVE would be
meaningless).</p>
<note type="warning"><title>Warning</title>
	Where SELECTIVE mode is selected for a virtual host, the activation
	of privileges must be deferred until <em>after</em> the mapping
	phase of request processing has determined what
	<code>&lt;Directory&gt;</code> context applies to the request.
	This might give an attacker opportunities to introduce
	code through a <directive module="mod_rewrite">RewriteMap</directive>
	running at top-level or <code>&lt;VirtualHost&gt;</code> context
	<em>before</em> privileges have been dropped and userid/gid set.
</note>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>VHostUser</name>
<description>Sets the User ID under which a virtual host runs.</description>
<syntax>VHostUser <var>unix-userid</var></syntax>
<default>Inherits the userid specified in
<directive module="mod_unixd">User</directive></default>
<contextlist><context>virtual host</context></contextlist>
<compatibility>Available on Solaris 10 and OpenSolaris with
non-threaded MPMs (<module>prefork</module> or custom MPM).</compatibility>

<usage>
    <p>The <directive>VHostUser</directive> directive sets the Unix userid
    under which the server will process requests to a virtualhost.
    The userid is set before the request is processed and reset afterwards
    using <a
    href="http://sosc-dr.sun.com/bigadmin/features/articles/least_privilege.jsp"
    >Solaris Privileges</a>.  Since the setting applies to the
    <em>process</em>, this is not compatible with threaded MPMs.</p>
    <p><var>Unix-userid</var> is one of:</p>
    <dl>
      <dt>A username</dt>
      <dd>Refers to the given user by name.</dd>

      <dt><code>#</code> followed by a user number.</dt>
      <dd>Refers to a user by its number.</dd>
    </dl>

    <note type="warning"><title>Security</title>
    <p>This directive cannot be used to run apache as root!
    Nevertheless, it opens potential security issues similar to
    those discussed in the <a href="../suexec.html">suexec</a>
    documentation.</p></note>
</usage>
<seealso><directive module="mod_unixd">User</directive></seealso>
<seealso><directive module="mod_suexec">SuexecUserGroup</directive></seealso>
</directivesynopsis>

<directivesynopsis>
<name>VHostGroup</name>
<description>Sets the Group ID under which a virtual host runs.</description>
<syntax>VHostGroup <var>unix-groupid</var></syntax>
<default>Inherits the group id specified in
<directive module="mod_unixd">Group</directive></default>
<contextlist><context>virtual host</context></contextlist>
<compatibility>Available on Solaris 10 and OpenSolaris with
non-threaded MPMs (<module>prefork</module> or custom MPM).</compatibility>

<usage>
    <p>The <directive>VHostGroup</directive> directive sets the Unix group
    under which the server will process requests to a virtualhost.
    The group is set before the request is processed and reset afterwards
    using <a
    href="http://sosc-dr.sun.com/bigadmin/features/articles/least_privilege.jsp"
    >Solaris Privileges</a>.  Since the setting applies to the
    <em>process</em>, this is not compatible with threaded MPMs.</p>
    <p><var>Unix-group</var> is one of:</p>
    <dl>
      <dt>A group name</dt>
      <dd>Refers to the given group by name.</dd>

      <dt><code>#</code> followed by a group number.</dt>
      <dd>Refers to a group by its number.</dd>
    </dl>

    <note type="warning"><title>Security</title>
    <p>This directive cannot be used to run apache as root!
    Nevertheless, it opens potential security issues similar to
    those discussed in the <a href="../suexec.html">suexec</a>
    documentation.</p></note>
</usage>
<seealso><directive module="mod_unixd">Group</directive></seealso>
<seealso><directive module="mod_suexec">SuexecUserGroup</directive></seealso>
</directivesynopsis>

<directivesynopsis>
<name>VHostSecure</name>
<description>Determines whether the server runs with enhanced security
for the virtualhost.</description>
<syntax>VHostSecure On|Off</syntax>
<default>VHostSecure On</default>
<contextlist><context>virtual host</context></contextlist>
<compatibility>Available on Solaris 10 and OpenSolaris with
non-threaded MPMs (<module>prefork</module> or custom MPM).</compatibility>

<usage>
    <p>Determines whether the virtual host processes requests with
    security enhanced by removal of <a
    href="http://sosc-dr.sun.com/bigadmin/features/articles/least_privilege.jsp"
    >Privileges</a> that are rarely needed in a webserver, but which are
    available by default to a normal Unix user and may therefore
    be required by modules and applications.  It is recommended that
    you retain the default (On) unless it prevents an application running.
    Since the setting applies to the <em>process</em>, this is not
    compatible with threaded MPMs.</p>
    <note><title>Note</title>
    <p>If <directive>VHostSecure</directive> prevents an application
    running, this may be a warning sign that the application should be
    reviewed for security.</p></note>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>VHostCGIMode</name>
<description>Determines whether the virtualhost can run
subprocesses, and the privileges available to subprocesses.</description>
<syntax>VHostCGIMode On|Off|Secure</syntax>
<default>VHostCGIMode On</default>
<contextlist><context>virtual host</context></contextlist>
<compatibility>Available on Solaris 10 and OpenSolaris with
non-threaded MPMs (<module>prefork</module> or custom MPM).</compatibility>

<usage>
    <p>Determines whether the virtual host is allowed to run fork and exec,
    the <a
    href="http://sosc-dr.sun.com/bigadmin/features/articles/least_privilege.jsp"
    >privileges</a> required to run subprocesses.  If this is set to
    <var>Off</var> the virtualhost is denied the privileges and will not
    be able to run traditional CGI programs or scripts under the traditional
    <module>mod_cgi</module>, nor similar external programs such as those
    created by <module>mod_ext_filter</module> or
    <directive module="mod_rewrite">RewriteMap</directive> <var>prog</var>.
    Note that it does not prevent CGI programs running under alternative
    process and security models such as <a href="https://httpd.apache.org/mod_fcgid/"
    >mod_fcgid</a>, which is a recommended solution in Solaris.</p>
    <p>If set to <var>On</var> or <var>Secure</var>, the virtual host
    is permitted to run external programs and scripts as above.
    Setting <directive>VHostCGIMode</directive> <var>Secure</var> has
    the effect of denying privileges to the subprocesses, as described
    for <directive>VHostSecure</directive>.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>DTracePrivileges</name>
<description>Determines whether the privileges required by dtrace are enabled.</description>
<syntax>DTracePrivileges On|Off</syntax>
<default>DTracePrivileges Off</default>
<contextlist><context>server config</context></contextlist>
<compatibility>Available on Solaris 10 and OpenSolaris with
non-threaded MPMs (<module>prefork</module> or custom MPM).</compatibility>

<usage>
    <p>This server-wide directive determines whether Apache will run with
    the <a
    href="http://sosc-dr.sun.com/bigadmin/features/articles/least_privilege.jsp"
    >privileges</a> required to run
    <a href="http://sosc-dr.sun.com/bigadmin/content/dtrace/">dtrace</a>.
    Note that <var>DTracePrivileges On</var> will not in itself
    activate DTrace, but <var>DTracePrivileges Off</var> will prevent
    it working.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>VHostPrivs</name>
<description>Assign arbitrary privileges to a virtual host.</description>
<syntax>VHostPrivs [+-]?<var>privilege-name</var> [[+-]?privilege-name] ...</syntax>
<default>None</default>
<contextlist><context>virtual host</context></contextlist>
<compatibility>Available on Solaris 10 and OpenSolaris with
non-threaded MPMs (<module>prefork</module> or custom MPM)
and when <module>mod_privileges</module> is compiled with the
<var>BIG_SECURITY_HOLE</var> compile-time option.</compatibility>

<usage>
    <p><directive>VHostPrivs</directive> can be used to assign arbitrary <a
    href="http://sosc-dr.sun.com/bigadmin/features/articles/least_privilege.jsp"
    >privileges</a> to a virtual host.  Each <var>privilege-name</var>
    is the name of a Solaris privilege, such as <var>file_setid</var>
    or <var>sys_nfs</var>.</p>

    <p>A <var>privilege-name</var> may optionally be prefixed by
    + or -, which will respectively allow or deny a privilege.
    If used with neither + nor -, all privileges otherwise assigned
    to the virtualhost will be denied.  You can use this to override
    any of the default sets and construct your own privilege set.</p>

    <note type="warning"><title>Security</title>
    <p>This directive can open huge security holes in apache, up to
    and including running requests with root-level powers.  Do not
    use it unless you fully understand what you are doing!</p></note>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>VHostCGIPrivs</name>
<description>Assign arbitrary privileges to subprocesses created
by a virtual host.</description>
<syntax>VHostPrivs [+-]?<var>privilege-name</var> [[+-]?privilege-name] ...</syntax>
<default>None</default>
<contextlist><context>virtual host</context></contextlist>
<compatibility>Available on Solaris 10 and OpenSolaris with
non-threaded MPMs (<module>prefork</module> or custom MPM)
and when <module>mod_privileges</module> is compiled with the
<var>BIG_SECURITY_HOLE</var> compile-time option.</compatibility>

<usage>
    <p><directive>VHostCGIPrivs</directive> can be used to assign arbitrary <a
    href="http://sosc-dr.sun.com/bigadmin/features/articles/least_privilege.jsp"
    >privileges</a> to subprocesses created by a virtual host, as discussed
    under <directive>VHostCGIMode</directive>.  Each <var>privilege-name</var>
    is the name of a Solaris privilege, such as <var>file_setid</var>
    or <var>sys_nfs</var>.</p>

    <p>A <var>privilege-name</var> may optionally be prefixed by
    + or -, which will respectively allow or deny a privilege.
    If used with neither + nor -, all privileges otherwise assigned
    to the virtualhost will be denied.  You can use this to override
    any of the default sets and construct your own privilege set.</p>

    <note type="warning"><title>Security</title>
    <p>This directive can open huge security holes in apache subprocesses,
    up to and including running them with root-level powers.  Do not
    use it unless you fully understand what you are doing!</p></note>
</usage>
</directivesynopsis>



</modulesynopsis>