| /* Licensed to the Apache Software Foundation (ASF) under one or more | |
| * contributor license agreements. See the NOTICE file distributed with | |
| * this work for additional information regarding copyright ownership. | |
| * The ASF licenses this file to You under the Apache License, Version 2.0 | |
| * (the "License"); you may not use this file except in compliance with | |
| * the License. You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| /* | |
| * httpd.c: simple http daemon for answering WWW file requests | |
| * | |
| * | |
| * 03-21-93 Rob McCool wrote original code (up to NCSA HTTPd 1.3) | |
| * | |
| * 03-06-95 blong | |
| * changed server number for child-alone processes to 0 and changed name | |
| * of processes | |
| * | |
| * 03-10-95 blong | |
| * Added numerous speed hacks proposed by Robert S. Thau (rst@ai.mit.edu) | |
| * including set group before fork, and call gettime before to fork | |
| * to set up libraries. | |
| * | |
| * 04-14-95 rst / rh | |
| * Brandon's code snarfed from NCSA 1.4, but tinkered to work with the | |
| * Apache server, and also to have child processes do accept() directly. | |
| * | |
| * April-July '95 rst | |
| * Extensive rework for Apache. | |
| */ | |
| #include "apr.h" | |
| #include "apr_portable.h" | |
| #include "apr_strings.h" | |
| #include "apr_thread_proc.h" | |
| #include "apr_signal.h" | |
| #include "apr_tables.h" | |
| #include "apr_getopt.h" | |
| #include "apr_thread_mutex.h" | |
| #define APR_WANT_STDIO | |
| #define APR_WANT_STRFUNC | |
| #include "apr_want.h" | |
| #if APR_HAVE_UNISTD_H | |
| #include <unistd.h> | |
| #endif | |
| #if APR_HAVE_SYS_TYPES_H | |
| #include <sys/types.h> | |
| #endif | |
| #ifndef USE_WINSOCK | |
| #include <sys/select.h> | |
| #endif | |
| #include "ap_config.h" | |
| #include "httpd.h" | |
| #include "mpm_default.h" | |
| #include "http_main.h" | |
| #include "http_log.h" | |
| #include "http_config.h" | |
| #include "http_core.h" /* for get_remote_host */ | |
| #include "http_connection.h" | |
| #include "scoreboard.h" | |
| #include "ap_mpm.h" | |
| #include "mpm_common.h" | |
| #include "ap_listen.h" | |
| #include "ap_mmn.h" | |
| #ifdef HAVE_TIME_H | |
| #include <time.h> | |
| #endif | |
| #include <signal.h> | |
| #include <netware.h> | |
| #include <nks/netware.h> | |
| #include <library.h> | |
| #include <screen.h> | |
| int nlmUnloadSignaled(int wait); | |
| /* Limit on the total --- clients will be locked out if more servers than | |
| * this are needed. It is intended solely to keep the server from crashing | |
| * when things get out of hand. | |
| * | |
| * We keep a hard maximum number of servers, for two reasons --- first off, | |
| * in case something goes seriously wrong, we want to stop the fork bomb | |
| * short of actually crashing the machine we're running on by filling some | |
| * kernel table. Secondly, it keeps the size of the scoreboard file small | |
| * enough that we can read the whole thing without worrying too much about | |
| * the overhead. | |
| */ | |
| #ifndef HARD_SERVER_LIMIT | |
| #define HARD_SERVER_LIMIT 1 | |
| #endif | |
| #define WORKER_DEAD SERVER_DEAD | |
| #define WORKER_STARTING SERVER_STARTING | |
| #define WORKER_READY SERVER_READY | |
| #define WORKER_IDLE_KILL SERVER_IDLE_KILL | |
| #define MPM_HARD_LIMITS_FILE "/mpm_default.h" | |
| /* *Non*-shared http_main globals... */ | |
| static int ap_threads_per_child=0; /* Worker threads per child */ | |
| static int ap_threads_to_start=0; | |
| static int ap_threads_min_free=0; | |
| static int ap_threads_max_free=0; | |
| static int ap_threads_limit=0; | |
| static int mpm_state = AP_MPMQ_STARTING; | |
| /* | |
| * The max child slot ever assigned, preserved across restarts. Necessary | |
| * to deal with MaxRequestWorkers changes across SIGWINCH restarts. We use this | |
| * value to optimize routines that have to scan the entire scoreboard. | |
| */ | |
| static int ap_max_workers_limit = -1; | |
| int hold_screen_on_exit = 0; /* Indicates whether the screen should be held open */ | |
| static fd_set listenfds; | |
| static int listenmaxfd; | |
| static apr_pool_t *pconf; /* Pool for config stuff */ | |
| static apr_pool_t *pmain; /* Pool for httpd child stuff */ | |
| static pid_t ap_my_pid; /* it seems silly to call getpid all the time */ | |
| static char *ap_my_addrspace = NULL; | |
| static int die_now = 0; | |
| /* Keep track of the number of worker threads currently active */ | |
| static unsigned long worker_thread_count; | |
| static int request_count; | |
| /* Structure used to register/deregister a console handler with the OS */ | |
| static int InstallConsoleHandler(void); | |
| static void RemoveConsoleHandler(void); | |
| static int CommandLineInterpreter(scr_t screenID, const char *commandLine); | |
| static CommandParser_t ConsoleHandler = {0, NULL, 0}; | |
| #define HANDLEDCOMMAND 0 | |
| #define NOTMYCOMMAND 1 | |
| static int show_settings = 0; | |
| //#define DBINFO_ON | |
| //#define DBPRINT_ON | |
| #ifdef DBPRINT_ON | |
| #define DBPRINT0(s) printf(s) | |
| #define DBPRINT1(s,v1) printf(s,v1) | |
| #define DBPRINT2(s,v1,v2) printf(s,v1,v2) | |
| #else | |
| #define DBPRINT0(s) | |
| #define DBPRINT1(s,v1) | |
| #define DBPRINT2(s,v1,v2) | |
| #endif | |
| /* volatile just in case */ | |
| static int volatile shutdown_pending; | |
| static int volatile restart_pending; | |
| static int volatile is_graceful; | |
| static int volatile wait_to_finish=1; | |
| static ap_generation_t volatile ap_my_generation=0; | |
| /* a clean exit from a child with proper cleanup */ | |
| static void clean_child_exit(int code, int worker_num, apr_pool_t *ptrans, | |
| apr_bucket_alloc_t *bucket_alloc) __attribute__ ((noreturn)); | |
| static void clean_child_exit(int code, int worker_num, apr_pool_t *ptrans, | |
| apr_bucket_alloc_t *bucket_alloc) | |
| { | |
| apr_bucket_alloc_destroy(bucket_alloc); | |
| if (!shutdown_pending) { | |
| apr_pool_destroy(ptrans); | |
| } | |
| atomic_dec (&worker_thread_count); | |
| if (worker_num >=0) | |
| ap_update_child_status_from_indexes(0, worker_num, WORKER_DEAD, | |
| (request_rec *) NULL); | |
| NXThreadExit((void*)&code); | |
| } | |
| /* proper cleanup when returning from ap_mpm_run() */ | |
| static void mpm_main_cleanup(void) | |
| { | |
| if (pmain) { | |
| apr_pool_destroy(pmain); | |
| } | |
| } | |
| static int netware_query(int query_code, int *result, apr_status_t *rv) | |
| { | |
| *rv = APR_SUCCESS; | |
| switch(query_code){ | |
| case AP_MPMQ_MAX_DAEMON_USED: | |
| *result = 1; | |
| break; | |
| case AP_MPMQ_IS_THREADED: | |
| *result = AP_MPMQ_DYNAMIC; | |
| break; | |
| case AP_MPMQ_IS_FORKED: | |
| *result = AP_MPMQ_NOT_SUPPORTED; | |
| break; | |
| case AP_MPMQ_HARD_LIMIT_DAEMONS: | |
| *result = HARD_SERVER_LIMIT; | |
| break; | |
| case AP_MPMQ_HARD_LIMIT_THREADS: | |
| *result = HARD_THREAD_LIMIT; | |
| break; | |
| case AP_MPMQ_MAX_THREADS: | |
| *result = ap_threads_limit; | |
| break; | |
| case AP_MPMQ_MIN_SPARE_DAEMONS: | |
| *result = 0; | |
| break; | |
| case AP_MPMQ_MIN_SPARE_THREADS: | |
| *result = ap_threads_min_free; | |
| break; | |
| case AP_MPMQ_MAX_SPARE_DAEMONS: | |
| *result = 0; | |
| break; | |
| case AP_MPMQ_MAX_SPARE_THREADS: | |
| *result = ap_threads_max_free; | |
| break; | |
| case AP_MPMQ_MAX_REQUESTS_DAEMON: | |
| *result = ap_max_requests_per_child; | |
| break; | |
| case AP_MPMQ_MAX_DAEMONS: | |
| *result = 1; | |
| break; | |
| case AP_MPMQ_MPM_STATE: | |
| *result = mpm_state; | |
| break; | |
| case AP_MPMQ_GENERATION: | |
| *result = ap_my_generation; | |
| break; | |
| default: | |
| *rv = APR_ENOTIMPL; | |
| break; | |
| } | |
| return OK; | |
| } | |
| static const char *netware_get_name(void) | |
| { | |
| return "NetWare"; | |
| } | |
| /***************************************************************** | |
| * Connection structures and accounting... | |
| */ | |
| static void mpm_term(void) | |
| { | |
| RemoveConsoleHandler(); | |
| wait_to_finish = 0; | |
| NXThreadYield(); | |
| } | |
| static void sig_term(int sig) | |
| { | |
| if (shutdown_pending == 1) { | |
| /* Um, is this _probably_ not an error, if the user has | |
| * tried to do a shutdown twice quickly, so we won't | |
| * worry about reporting it. | |
| */ | |
| return; | |
| } | |
| shutdown_pending = 1; | |
| DBPRINT0 ("waiting for threads\n"); | |
| while (wait_to_finish) { | |
| apr_thread_yield(); | |
| } | |
| DBPRINT0 ("goodbye\n"); | |
| } | |
| /* restart() is the signal handler for SIGHUP and SIGWINCH | |
| * in the parent process, unless running in ONE_PROCESS mode | |
| */ | |
| static void restart(void) | |
| { | |
| if (restart_pending == 1) { | |
| /* Probably not an error - don't bother reporting it */ | |
| return; | |
| } | |
| restart_pending = 1; | |
| is_graceful = 1; | |
| } | |
| static void set_signals(void) | |
| { | |
| apr_signal(SIGTERM, sig_term); | |
| apr_signal(SIGABRT, sig_term); | |
| } | |
| int nlmUnloadSignaled(int wait) | |
| { | |
| shutdown_pending = 1; | |
| if (wait) { | |
| while (wait_to_finish) { | |
| NXThreadYield(); | |
| } | |
| } | |
| return 0; | |
| } | |
| /***************************************************************** | |
| * Child process main loop. | |
| * The following vars are static to avoid getting clobbered by longjmp(); | |
| * they are really private to child_main. | |
| */ | |
| #define MAX_WB_RETRIES 3 | |
| #ifdef DBINFO_ON | |
| static int would_block = 0; | |
| static int retry_success = 0; | |
| static int retry_fail = 0; | |
| static int avg_retries = 0; | |
| #endif | |
| /*static */ | |
| void worker_main(void *arg) | |
| { | |
| ap_listen_rec *lr, *first_lr, *last_lr = NULL; | |
| apr_pool_t *ptrans; | |
| apr_allocator_t *allocator; | |
| apr_bucket_alloc_t *bucket_alloc; | |
| conn_rec *current_conn; | |
| apr_status_t stat = APR_EINIT; | |
| ap_sb_handle_t *sbh; | |
| apr_thread_t *thd = NULL; | |
| apr_os_thread_t osthd; | |
| int my_worker_num = (int)arg; | |
| apr_socket_t *csd = NULL; | |
| int requests_this_child = 0; | |
| apr_socket_t *sd = NULL; | |
| fd_set main_fds; | |
| int sockdes; | |
| int srv; | |
| struct timeval tv; | |
| int wouldblock_retry; | |
| osthd = apr_os_thread_current(); | |
| apr_os_thread_put(&thd, &osthd, pmain); | |
| tv.tv_sec = 1; | |
| tv.tv_usec = 0; | |
| apr_allocator_create(&allocator); | |
| apr_allocator_max_free_set(allocator, ap_max_mem_free); | |
| apr_pool_create_ex(&ptrans, pmain, NULL, allocator); | |
| apr_allocator_owner_set(allocator, ptrans); | |
| apr_pool_tag(ptrans, "transaction"); | |
| bucket_alloc = apr_bucket_alloc_create_ex(allocator); | |
| atomic_inc (&worker_thread_count); | |
| while (!die_now) { | |
| /* | |
| * (Re)initialize this child to a pre-connection state. | |
| */ | |
| current_conn = NULL; | |
| apr_pool_clear(ptrans); | |
| if ((ap_max_requests_per_child > 0 | |
| && requests_this_child++ >= ap_max_requests_per_child)) { | |
| DBPRINT1 ("\n**Thread slot %d is shutting down", my_worker_num); | |
| clean_child_exit(0, my_worker_num, ptrans, bucket_alloc); | |
| } | |
| ap_update_child_status_from_indexes(0, my_worker_num, WORKER_READY, | |
| (request_rec *) NULL); | |
| /* | |
| * Wait for an acceptable connection to arrive. | |
| */ | |
| for (;;) { | |
| if (shutdown_pending || restart_pending || (ap_scoreboard_image->servers[0][my_worker_num].status == WORKER_IDLE_KILL)) { | |
| DBPRINT1 ("\nThread slot %d is shutting down\n", my_worker_num); | |
| clean_child_exit(0, my_worker_num, ptrans, bucket_alloc); | |
| } | |
| /* Check the listen queue on all sockets for requests */ | |
| memcpy(&main_fds, &listenfds, sizeof(fd_set)); | |
| srv = select(listenmaxfd + 1, &main_fds, NULL, NULL, &tv); | |
| if (srv <= 0) { | |
| if (srv < 0) { | |
| ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, APLOGNO(00217) | |
| "select() failed on listen socket"); | |
| apr_thread_yield(); | |
| } | |
| continue; | |
| } | |
| /* remember the last_lr we searched last time around so that | |
| we don't end up starving any particular listening socket */ | |
| if (last_lr == NULL) { | |
| lr = ap_listeners; | |
| } | |
| else { | |
| lr = last_lr->next; | |
| if (!lr) | |
| lr = ap_listeners; | |
| } | |
| first_lr = lr; | |
| do { | |
| apr_os_sock_get(&sockdes, lr->sd); | |
| if (FD_ISSET(sockdes, &main_fds)) | |
| goto got_listener; | |
| lr = lr->next; | |
| if (!lr) | |
| lr = ap_listeners; | |
| } while (lr != first_lr); | |
| /* if we get here, something unexpected happened. Go back | |
| into the select state and try again. | |
| */ | |
| continue; | |
| got_listener: | |
| last_lr = lr; | |
| sd = lr->sd; | |
| wouldblock_retry = MAX_WB_RETRIES; | |
| while (wouldblock_retry) { | |
| if ((stat = apr_socket_accept(&csd, sd, ptrans)) == APR_SUCCESS) { | |
| break; | |
| } | |
| else { | |
| /* if the error is a wouldblock then maybe we were too | |
| quick try to pull the next request from the listen | |
| queue. Try a few more times then return to our idle | |
| listen state. */ | |
| if (!APR_STATUS_IS_EAGAIN(stat)) { | |
| break; | |
| } | |
| if (wouldblock_retry--) { | |
| apr_thread_yield(); | |
| } | |
| } | |
| } | |
| /* If we got a new socket, set it to non-blocking mode and process | |
| it. Otherwise handle the error. */ | |
| if (stat == APR_SUCCESS) { | |
| apr_socket_opt_set(csd, APR_SO_NONBLOCK, 0); | |
| #ifdef DBINFO_ON | |
| if (wouldblock_retry < MAX_WB_RETRIES) { | |
| retry_success++; | |
| avg_retries += (MAX_WB_RETRIES-wouldblock_retry); | |
| } | |
| #endif | |
| break; /* We have a socket ready for reading */ | |
| } | |
| else { | |
| #ifdef DBINFO_ON | |
| if (APR_STATUS_IS_EAGAIN(stat)) { | |
| would_block++; | |
| retry_fail++; | |
| } | |
| else if ( | |
| #else | |
| if (APR_STATUS_IS_EAGAIN(stat) || | |
| #endif | |
| APR_STATUS_IS_ECONNRESET(stat) || | |
| APR_STATUS_IS_ETIMEDOUT(stat) || | |
| APR_STATUS_IS_EHOSTUNREACH(stat) || | |
| APR_STATUS_IS_ENETUNREACH(stat)) { | |
| ; | |
| } | |
| #ifdef USE_WINSOCK | |
| else if (APR_STATUS_IS_ENETDOWN(stat)) { | |
| /* | |
| * When the network layer has been shut down, there | |
| * is not much use in simply exiting: the parent | |
| * would simply re-create us (and we'd fail again). | |
| * Use the CHILDFATAL code to tear the server down. | |
| * @@@ Martin's idea for possible improvement: | |
| * A different approach would be to define | |
| * a new APEXIT_NETDOWN exit code, the reception | |
| * of which would make the parent shutdown all | |
| * children, then idle-loop until it detected that | |
| * the network is up again, and restart the children. | |
| * Ben Hyde noted that temporary ENETDOWN situations | |
| * occur in mobile IP. | |
| */ | |
| ap_log_error(APLOG_MARK, APLOG_EMERG, stat, ap_server_conf, APLOGNO(00218) | |
| "apr_socket_accept: giving up."); | |
| clean_child_exit(APEXIT_CHILDFATAL, my_worker_num, ptrans, | |
| bucket_alloc); | |
| } | |
| #endif | |
| else { | |
| ap_log_error(APLOG_MARK, APLOG_ERR, stat, ap_server_conf, APLOGNO(00219) | |
| "apr_socket_accept: (client socket)"); | |
| clean_child_exit(1, my_worker_num, ptrans, bucket_alloc); | |
| } | |
| } | |
| } | |
| ap_create_sb_handle(&sbh, ptrans, 0, my_worker_num); | |
| /* | |
| * We now have a connection, so set it up with the appropriate | |
| * socket options, file descriptors, and read/write buffers. | |
| */ | |
| current_conn = ap_run_create_connection(ptrans, ap_server_conf, csd, | |
| my_worker_num, sbh, | |
| bucket_alloc); | |
| if (current_conn) { | |
| current_conn->current_thread = thd; | |
| ap_process_connection(current_conn, csd); | |
| ap_lingering_close(current_conn); | |
| } | |
| request_count++; | |
| } | |
| clean_child_exit(0, my_worker_num, ptrans, bucket_alloc); | |
| } | |
| static int make_child(server_rec *s, int slot) | |
| { | |
| int tid; | |
| int err=0; | |
| NXContext_t ctx; | |
| if (slot + 1 > ap_max_workers_limit) { | |
| ap_max_workers_limit = slot + 1; | |
| } | |
| ap_update_child_status_from_indexes(0, slot, WORKER_STARTING, | |
| (request_rec *) NULL); | |
| if (ctx = NXContextAlloc((void (*)(void *)) worker_main, (void*)slot, NX_PRIO_MED, ap_thread_stacksize, NX_CTX_NORMAL, &err)) { | |
| char threadName[32]; | |
| sprintf (threadName, "Apache_Worker %d", slot); | |
| NXContextSetName(ctx, threadName); | |
| err = NXThreadCreate(ctx, NX_THR_BIND_CONTEXT, &tid); | |
| if (err) { | |
| NXContextFree (ctx); | |
| } | |
| } | |
| if (err) { | |
| /* create thread didn't succeed. Fix the scoreboard or else | |
| * it will say SERVER_STARTING forever and ever | |
| */ | |
| ap_update_child_status_from_indexes(0, slot, WORKER_DEAD, | |
| (request_rec *) NULL); | |
| /* In case system resources are maxxed out, we don't want | |
| Apache running away with the CPU trying to fork over and | |
| over and over again. */ | |
| apr_thread_yield(); | |
| return -1; | |
| } | |
| ap_scoreboard_image->servers[0][slot].tid = tid; | |
| return 0; | |
| } | |
| /* start up a bunch of worker threads */ | |
| static void startup_workers(int number_to_start) | |
| { | |
| int i; | |
| for (i = 0; number_to_start && i < ap_threads_limit; ++i) { | |
| if (ap_scoreboard_image->servers[0][i].status != WORKER_DEAD) { | |
| continue; | |
| } | |
| if (make_child(ap_server_conf, i) < 0) { | |
| break; | |
| } | |
| --number_to_start; | |
| } | |
| } | |
| /* | |
| * idle_spawn_rate is the number of children that will be spawned on the | |
| * next maintenance cycle if there aren't enough idle servers. It is | |
| * doubled up to MAX_SPAWN_RATE, and reset only when a cycle goes by | |
| * without the need to spawn. | |
| */ | |
| static int idle_spawn_rate = 1; | |
| #ifndef MAX_SPAWN_RATE | |
| #define MAX_SPAWN_RATE (64) | |
| #endif | |
| static int hold_off_on_exponential_spawning; | |
| static void perform_idle_server_maintenance(apr_pool_t *p) | |
| { | |
| int i; | |
| int idle_count; | |
| worker_score *ws; | |
| int free_length; | |
| int free_slots[MAX_SPAWN_RATE]; | |
| int last_non_dead; | |
| int total_non_dead; | |
| /* initialize the free_list */ | |
| free_length = 0; | |
| idle_count = 0; | |
| last_non_dead = -1; | |
| total_non_dead = 0; | |
| for (i = 0; i < ap_threads_limit; ++i) { | |
| int status; | |
| if (i >= ap_max_workers_limit && free_length == idle_spawn_rate) | |
| break; | |
| ws = &ap_scoreboard_image->servers[0][i]; | |
| status = ws->status; | |
| if (status == WORKER_DEAD) { | |
| /* try to keep children numbers as low as possible */ | |
| if (free_length < idle_spawn_rate) { | |
| free_slots[free_length] = i; | |
| ++free_length; | |
| } | |
| } | |
| else if (status == WORKER_IDLE_KILL) { | |
| /* If it is already marked to die, skip it */ | |
| continue; | |
| } | |
| else { | |
| /* We consider a starting server as idle because we started it | |
| * at least a cycle ago, and if it still hasn't finished starting | |
| * then we're just going to swamp things worse by forking more. | |
| * So we hopefully won't need to fork more if we count it. | |
| * This depends on the ordering of SERVER_READY and SERVER_STARTING. | |
| */ | |
| if (status <= WORKER_READY) { | |
| ++ idle_count; | |
| } | |
| ++total_non_dead; | |
| last_non_dead = i; | |
| } | |
| } | |
| DBPRINT2("Total: %d Idle Count: %d \r", total_non_dead, idle_count); | |
| ap_max_workers_limit = last_non_dead + 1; | |
| if (idle_count > ap_threads_max_free) { | |
| /* kill off one child... we use the pod because that'll cause it to | |
| * shut down gracefully, in case it happened to pick up a request | |
| * while we were counting | |
| */ | |
| idle_spawn_rate = 1; | |
| ap_update_child_status_from_indexes(0, last_non_dead, WORKER_IDLE_KILL, | |
| (request_rec *) NULL); | |
| DBPRINT1("\nKilling idle thread: %d\n", last_non_dead); | |
| } | |
| else if (idle_count < ap_threads_min_free) { | |
| /* terminate the free list */ | |
| if (free_length == 0) { | |
| /* only report this condition once */ | |
| static int reported = 0; | |
| if (!reported) { | |
| ap_log_error(APLOG_MARK, APLOG_ERR, 0, ap_server_conf, APLOGNO(00220) | |
| "server reached MaxRequestWorkers setting, consider" | |
| " raising the MaxRequestWorkers setting"); | |
| reported = 1; | |
| } | |
| idle_spawn_rate = 1; | |
| } | |
| else { | |
| if (idle_spawn_rate >= 8) { | |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ap_server_conf, APLOGNO(00221) | |
| "server seems busy, (you may need " | |
| "to increase StartServers, or Min/MaxSpareServers), " | |
| "spawning %d children, there are %d idle, and " | |
| "%d total children", idle_spawn_rate, | |
| idle_count, total_non_dead); | |
| } | |
| DBPRINT0("\n"); | |
| for (i = 0; i < free_length; ++i) { | |
| DBPRINT1("Spawning additional thread slot: %d\n", free_slots[i]); | |
| make_child(ap_server_conf, free_slots[i]); | |
| } | |
| /* the next time around we want to spawn twice as many if this | |
| * wasn't good enough, but not if we've just done a graceful | |
| */ | |
| if (hold_off_on_exponential_spawning) { | |
| --hold_off_on_exponential_spawning; | |
| } | |
| else if (idle_spawn_rate < MAX_SPAWN_RATE) { | |
| idle_spawn_rate *= 2; | |
| if (idle_spawn_rate > MAX_SPAWN_RATE) { | |
| idle_spawn_rate = MAX_SPAWN_RATE; | |
| } | |
| } | |
| } | |
| } | |
| else { | |
| idle_spawn_rate = 1; | |
| } | |
| } | |
| static void display_settings() | |
| { | |
| int status_array[SERVER_NUM_STATUS]; | |
| int i, status, total=0; | |
| int reqs = request_count; | |
| #ifdef DBINFO_ON | |
| int wblock = would_block; | |
| would_block = 0; | |
| #endif | |
| request_count = 0; | |
| ClearScreen (getscreenhandle()); | |
| printf("%s \n", ap_get_server_description()); | |
| for (i=0;i<SERVER_NUM_STATUS;i++) { | |
| status_array[i] = 0; | |
| } | |
| for (i = 0; i < ap_threads_limit; ++i) { | |
| status = (ap_scoreboard_image->servers[0][i]).status; | |
| status_array[status]++; | |
| } | |
| for (i=0;i<SERVER_NUM_STATUS;i++) { | |
| switch(i) | |
| { | |
| case SERVER_DEAD: | |
| printf ("Available:\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_STARTING: | |
| printf ("Starting:\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_READY: | |
| printf ("Ready:\t\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_BUSY_READ: | |
| printf ("Busy:\t\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_BUSY_WRITE: | |
| printf ("Busy Write:\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_BUSY_KEEPALIVE: | |
| printf ("Busy Keepalive:\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_BUSY_LOG: | |
| printf ("Busy Log:\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_BUSY_DNS: | |
| printf ("Busy DNS:\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_CLOSING: | |
| printf ("Closing:\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_GRACEFUL: | |
| printf ("Restart:\t%d\n", status_array[i]); | |
| break; | |
| case SERVER_IDLE_KILL: | |
| printf ("Idle Kill:\t%d\n", status_array[i]); | |
| break; | |
| default: | |
| printf ("Unknown Status:\t%d\n", status_array[i]); | |
| break; | |
| } | |
| if (i != SERVER_DEAD) | |
| total+=status_array[i]; | |
| } | |
| printf ("Total Running:\t%d\tout of: \t%d\n", total, ap_threads_limit); | |
| printf ("Requests per interval:\t%d\n", reqs); | |
| #ifdef DBINFO_ON | |
| printf ("Would blocks:\t%d\n", wblock); | |
| printf ("Successful retries:\t%d\n", retry_success); | |
| printf ("Failed retries:\t%d\n", retry_fail); | |
| printf ("Avg retries:\t%d\n", retry_success == 0 ? 0 : avg_retries / retry_success); | |
| #endif | |
| } | |
| static void show_server_data() | |
| { | |
| ap_listen_rec *lr; | |
| module **m; | |
| printf("%s\n", ap_get_server_description()); | |
| if (ap_my_addrspace && (ap_my_addrspace[0] != 'O') && (ap_my_addrspace[1] != 'S')) | |
| printf(" Running in address space %s\n", ap_my_addrspace); | |
| /* Display listening ports */ | |
| printf(" Listening on port(s):"); | |
| lr = ap_listeners; | |
| do { | |
| printf(" %d", lr->bind_addr->port); | |
| lr = lr->next; | |
| } while (lr && lr != ap_listeners); | |
| /* Display dynamic modules loaded */ | |
| printf("\n"); | |
| for (m = ap_loaded_modules; *m != NULL; m++) { | |
| if (((module*)*m)->dynamic_load_handle) { | |
| printf(" Loaded dynamic module %s\n", ((module*)*m)->name); | |
| } | |
| } | |
| } | |
| static int setup_listeners(server_rec *s) | |
| { | |
| ap_listen_rec *lr; | |
| int sockdes; | |
| if (ap_setup_listeners(s) < 1 ) { | |
| ap_log_error(APLOG_MARK, APLOG_ALERT, 0, s, APLOGNO(00222) | |
| "no listening sockets available, shutting down"); | |
| return -1; | |
| } | |
| listenmaxfd = -1; | |
| FD_ZERO(&listenfds); | |
| for (lr = ap_listeners; lr; lr = lr->next) { | |
| apr_os_sock_get(&sockdes, lr->sd); | |
| FD_SET(sockdes, &listenfds); | |
| if (sockdes > listenmaxfd) { | |
| listenmaxfd = sockdes; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int shutdown_listeners() | |
| { | |
| ap_listen_rec *lr; | |
| for (lr = ap_listeners; lr; lr = lr->next) { | |
| apr_socket_close(lr->sd); | |
| } | |
| ap_listeners = NULL; | |
| return 0; | |
| } | |
| /***************************************************************** | |
| * Executive routines. | |
| */ | |
| static int netware_run(apr_pool_t *_pconf, apr_pool_t *plog, server_rec *s) | |
| { | |
| apr_status_t status=0; | |
| pconf = _pconf; | |
| ap_server_conf = s; | |
| if (setup_listeners(s)) { | |
| ap_log_error(APLOG_MARK, APLOG_ALERT, status, s, APLOGNO(00223) | |
| "no listening sockets available, shutting down"); | |
| return !OK; | |
| } | |
| restart_pending = shutdown_pending = 0; | |
| worker_thread_count = 0; | |
| if (!is_graceful) { | |
| if (ap_run_pre_mpm(s->process->pool, SB_NOT_SHARED) != OK) { | |
| return !OK; | |
| } | |
| } | |
| /* Only set slot 0 since that is all NetWare will ever have. */ | |
| ap_scoreboard_image->parent[0].pid = getpid(); | |
| ap_scoreboard_image->parent[0].generation = ap_my_generation; | |
| ap_run_child_status(ap_server_conf, | |
| ap_scoreboard_image->parent[0].pid, | |
| ap_my_generation, | |
| 0, | |
| MPM_CHILD_STARTED); | |
| set_signals(); | |
| apr_pool_create(&pmain, pconf); | |
| apr_pool_tag(pmain, "pmain"); | |
| ap_run_child_init(pmain, ap_server_conf); | |
| if (ap_threads_max_free < ap_threads_min_free + 1) /* Don't thrash... */ | |
| ap_threads_max_free = ap_threads_min_free + 1; | |
| request_count = 0; | |
| startup_workers(ap_threads_to_start); | |
| /* Allow the Apache screen to be closed normally on exit() only if it | |
| has not been explicitly forced to close on exit(). (ie. the -E flag | |
| was specified at startup) */ | |
| if (hold_screen_on_exit > 0) { | |
| hold_screen_on_exit = 0; | |
| } | |
| ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, APLOGNO(00224) | |
| "%s configured -- resuming normal operations", | |
| ap_get_server_description()); | |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ap_server_conf, APLOGNO(00225) | |
| "Server built: %s", ap_get_server_built()); | |
| ap_log_command_line(plog, s); | |
| ap_log_mpm_common(s); | |
| show_server_data(); | |
| mpm_state = AP_MPMQ_RUNNING; | |
| while (!restart_pending && !shutdown_pending) { | |
| perform_idle_server_maintenance(pconf); | |
| if (show_settings) | |
| display_settings(); | |
| apr_thread_yield(); | |
| apr_sleep(SCOREBOARD_MAINTENANCE_INTERVAL); | |
| } | |
| mpm_state = AP_MPMQ_STOPPING; | |
| ap_run_child_status(ap_server_conf, | |
| ap_scoreboard_image->parent[0].pid, | |
| ap_my_generation, | |
| 0, | |
| MPM_CHILD_EXITED); | |
| /* Shutdown the listen sockets so that we don't get stuck in a blocking call. | |
| shutdown_listeners();*/ | |
| if (shutdown_pending) { /* Got an unload from the console */ | |
| ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, APLOGNO(00226) | |
| "caught SIGTERM, shutting down"); | |
| while (worker_thread_count > 0) { | |
| printf ("\rShutdown pending. Waiting for %lu thread(s) to terminate...", | |
| worker_thread_count); | |
| apr_thread_yield(); | |
| } | |
| mpm_main_cleanup(); | |
| return DONE; | |
| } | |
| else { /* the only other way out is a restart */ | |
| /* advance to the next generation */ | |
| /* XXX: we really need to make sure this new generation number isn't in | |
| * use by any of the children. | |
| */ | |
| ++ap_my_generation; | |
| ap_scoreboard_image->global->running_generation = ap_my_generation; | |
| ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, APLOGNO(00227) | |
| "Graceful restart requested, doing restart"); | |
| /* Wait for all of the threads to terminate before initiating the restart */ | |
| while (worker_thread_count > 0) { | |
| printf ("\rRestart pending. Waiting for %lu thread(s) to terminate...", | |
| worker_thread_count); | |
| apr_thread_yield(); | |
| } | |
| printf ("\nRestarting...\n"); | |
| } | |
| mpm_main_cleanup(); | |
| return OK; | |
| } | |
| static int netware_pre_config(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp) | |
| { | |
| char *addrname = NULL; | |
| mpm_state = AP_MPMQ_STARTING; | |
| is_graceful = 0; | |
| ap_my_pid = getpid(); | |
| addrname = getaddressspacename (NULL, NULL); | |
| if (addrname) { | |
| ap_my_addrspace = apr_pstrdup (p, addrname); | |
| free (addrname); | |
| } | |
| #ifndef USE_WINSOCK | |
| /* The following call has been moved to the mod_nw_ssl pre-config handler */ | |
| ap_listen_pre_config(); | |
| #endif | |
| ap_threads_to_start = DEFAULT_START_THREADS; | |
| ap_threads_min_free = DEFAULT_MIN_FREE_THREADS; | |
| ap_threads_max_free = DEFAULT_MAX_FREE_THREADS; | |
| ap_threads_limit = HARD_THREAD_LIMIT; | |
| ap_extended_status = 0; | |
| /* override core's default thread stacksize */ | |
| ap_thread_stacksize = DEFAULT_THREAD_STACKSIZE; | |
| return OK; | |
| } | |
| static int netware_check_config(apr_pool_t *p, apr_pool_t *plog, | |
| apr_pool_t *ptemp, server_rec *s) | |
| { | |
| static int restart_num = 0; | |
| int startup = 0; | |
| /* we want this only the first time around */ | |
| if (restart_num++ == 0) { | |
| startup = 1; | |
| } | |
| if (ap_threads_limit > HARD_THREAD_LIMIT) { | |
| if (startup) { | |
| ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00228) | |
| "WARNING: MaxThreads of %d exceeds compile-time " | |
| "limit of %d threads, decreasing to %d. " | |
| "To increase, please see the HARD_THREAD_LIMIT " | |
| "define in server/mpm/netware%s.", | |
| ap_threads_limit, HARD_THREAD_LIMIT, HARD_THREAD_LIMIT, | |
| MPM_HARD_LIMITS_FILE); | |
| } else { | |
| ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00229) | |
| "MaxThreads of %d exceeds compile-time limit " | |
| "of %d, decreasing to match", | |
| ap_threads_limit, HARD_THREAD_LIMIT); | |
| } | |
| ap_threads_limit = HARD_THREAD_LIMIT; | |
| } | |
| else if (ap_threads_limit < 1) { | |
| if (startup) { | |
| ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00230) | |
| "WARNING: MaxThreads of %d not allowed, " | |
| "increasing to 1.", ap_threads_limit); | |
| } else { | |
| ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(02661) | |
| "MaxThreads of %d not allowed, increasing to 1", | |
| ap_threads_limit); | |
| } | |
| ap_threads_limit = 1; | |
| } | |
| /* ap_threads_to_start > ap_threads_limit effectively checked in | |
| * call to startup_workers(ap_threads_to_start) in ap_mpm_run() | |
| */ | |
| if (ap_threads_to_start < 0) { | |
| if (startup) { | |
| ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00231) | |
| "WARNING: StartThreads of %d not allowed, " | |
| "increasing to 1.", ap_threads_to_start); | |
| } else { | |
| ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00232) | |
| "StartThreads of %d not allowed, increasing to 1", | |
| ap_threads_to_start); | |
| } | |
| ap_threads_to_start = 1; | |
| } | |
| if (ap_threads_min_free < 1) { | |
| if (startup) { | |
| ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00233) | |
| "WARNING: MinSpareThreads of %d not allowed, " | |
| "increasing to 1 to avoid almost certain server failure. " | |
| "Please read the documentation.", ap_threads_min_free); | |
| } else { | |
| ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00234) | |
| "MinSpareThreads of %d not allowed, increasing to 1", | |
| ap_threads_min_free); | |
| } | |
| ap_threads_min_free = 1; | |
| } | |
| /* ap_threads_max_free < ap_threads_min_free + 1 checked in ap_mpm_run() */ | |
| return OK; | |
| } | |
| static void netware_mpm_hooks(apr_pool_t *p) | |
| { | |
| /* Run the pre-config hook after core's so that it can override the | |
| * default setting of ThreadStackSize for NetWare. | |
| */ | |
| static const char * const predecessors[] = {"core.c", NULL}; | |
| ap_hook_pre_config(netware_pre_config, predecessors, NULL, APR_HOOK_MIDDLE); | |
| ap_hook_check_config(netware_check_config, NULL, NULL, APR_HOOK_MIDDLE); | |
| //ap_hook_post_config(netware_post_config, NULL, NULL, 0); | |
| //ap_hook_child_init(netware_child_init, NULL, NULL, APR_HOOK_MIDDLE); | |
| //ap_hook_open_logs(netware_open_logs, NULL, aszSucc, APR_HOOK_REALLY_FIRST); | |
| ap_hook_mpm(netware_run, NULL, NULL, APR_HOOK_MIDDLE); | |
| ap_hook_mpm_query(netware_query, NULL, NULL, APR_HOOK_MIDDLE); | |
| ap_hook_mpm_get_name(netware_get_name, NULL, NULL, APR_HOOK_MIDDLE); | |
| } | |
| static void netware_rewrite_args(process_rec *process) | |
| { | |
| char *def_server_root; | |
| char optbuf[3]; | |
| const char *opt_arg; | |
| apr_getopt_t *opt; | |
| apr_array_header_t *mpm_new_argv; | |
| atexit (mpm_term); | |
| InstallConsoleHandler(); | |
| /* Make sure to hold the Apache screen open if exit() is called */ | |
| hold_screen_on_exit = 1; | |
| /* Rewrite process->argv[]; | |
| * | |
| * add default -d serverroot from the path of this executable | |
| * | |
| * The end result will look like: | |
| * The -d serverroot default from the running executable | |
| */ | |
| if (process->argc > 0) { | |
| char *s = apr_pstrdup (process->pconf, process->argv[0]); | |
| if (s) { | |
| int i, len = strlen(s); | |
| for (i=len; i; i--) { | |
| if (s[i] == '\\' || s[i] == '/') { | |
| s[i] = '\0'; | |
| apr_filepath_merge(&def_server_root, NULL, s, | |
| APR_FILEPATH_TRUENAME, process->pool); | |
| break; | |
| } | |
| } | |
| /* Use process->pool so that the rewritten argv | |
| * lasts for the lifetime of the server process, | |
| * because pconf will be destroyed after the | |
| * initial pre-flight of the config parser. | |
| */ | |
| mpm_new_argv = apr_array_make(process->pool, process->argc + 2, | |
| sizeof(const char *)); | |
| *(const char **)apr_array_push(mpm_new_argv) = process->argv[0]; | |
| *(const char **)apr_array_push(mpm_new_argv) = "-d"; | |
| *(const char **)apr_array_push(mpm_new_argv) = def_server_root; | |
| optbuf[0] = '-'; | |
| optbuf[2] = '\0'; | |
| apr_getopt_init(&opt, process->pool, process->argc, process->argv); | |
| while (apr_getopt(opt, AP_SERVER_BASEARGS"n:", optbuf + 1, &opt_arg) == APR_SUCCESS) { | |
| switch (optbuf[1]) { | |
| case 'n': | |
| if (opt_arg) { | |
| renamescreen(opt_arg); | |
| } | |
| break; | |
| case 'E': | |
| /* Don't need to hold the screen open if the output is going to a file */ | |
| hold_screen_on_exit = -1; | |
| default: | |
| *(const char **)apr_array_push(mpm_new_argv) = | |
| apr_pstrdup(process->pool, optbuf); | |
| if (opt_arg) { | |
| *(const char **)apr_array_push(mpm_new_argv) = opt_arg; | |
| } | |
| break; | |
| } | |
| } | |
| process->argc = mpm_new_argv->nelts; | |
| process->argv = (const char * const *) mpm_new_argv->elts; | |
| } | |
| } | |
| } | |
| static int CommandLineInterpreter(scr_t screenID, const char *commandLine) | |
| { | |
| char *szCommand = "APACHE2 "; | |
| int iCommandLen = 8; | |
| char szcommandLine[256]; | |
| char *pID; | |
| screenID = screenID; | |
| if (commandLine == NULL) | |
| return NOTMYCOMMAND; | |
| if (strlen(commandLine) <= strlen(szCommand)) | |
| return NOTMYCOMMAND; | |
| apr_cpystrn(szcommandLine, commandLine, sizeof(szcommandLine)); | |
| /* All added commands begin with "APACHE2 " */ | |
| if (!strnicmp(szCommand, szcommandLine, iCommandLen)) { | |
| ActivateScreen (getscreenhandle()); | |
| /* If an instance id was not given but the nlm is loaded in | |
| protected space, then the command belongs to the | |
| OS address space instance to pass it on. */ | |
| pID = strstr (szcommandLine, "-p"); | |
| if ((pID == NULL) && nlmisloadedprotected()) | |
| return NOTMYCOMMAND; | |
| /* If we got an instance id but it doesn't match this | |
| instance of the nlm, pass it on. */ | |
| if (pID) { | |
| pID += 2; | |
| while (*pID == ' ') | |
| pID++; | |
| } | |
| if (pID && ap_my_addrspace && strnicmp(pID, ap_my_addrspace, strlen(ap_my_addrspace))) | |
| return NOTMYCOMMAND; | |
| /* If we have determined that this command belongs to this | |
| instance of the nlm, then handle it. */ | |
| if (!strnicmp("RESTART",&szcommandLine[iCommandLen],3)) { | |
| printf("Restart Requested...\n"); | |
| restart(); | |
| } | |
| else if (!strnicmp("VERSION",&szcommandLine[iCommandLen],3)) { | |
| printf("Server version: %s\n", ap_get_server_description()); | |
| printf("Server built: %s\n", ap_get_server_built()); | |
| } | |
| else if (!strnicmp("MODULES",&szcommandLine[iCommandLen],3)) { | |
| ap_show_modules(); | |
| } | |
| else if (!strnicmp("DIRECTIVES",&szcommandLine[iCommandLen],3)) { | |
| ap_show_directives(); | |
| } | |
| else if (!strnicmp("SHUTDOWN",&szcommandLine[iCommandLen],3)) { | |
| printf("Shutdown Requested...\n"); | |
| shutdown_pending = 1; | |
| } | |
| else if (!strnicmp("SETTINGS",&szcommandLine[iCommandLen],3)) { | |
| if (show_settings) { | |
| show_settings = 0; | |
| ClearScreen (getscreenhandle()); | |
| show_server_data(); | |
| } | |
| else { | |
| show_settings = 1; | |
| display_settings(); | |
| } | |
| } | |
| else { | |
| show_settings = 0; | |
| if (strnicmp("HELP",&szcommandLine[iCommandLen],3)) | |
| printf("Unknown APACHE2 command %s\n", &szcommandLine[iCommandLen]); | |
| printf("Usage: APACHE2 [command] [-p <instance ID>]\n"); | |
| printf("Commands:\n"); | |
| printf("\tDIRECTIVES - Show directives\n"); | |
| printf("\tHELP - Display this help information\n"); | |
| printf("\tMODULES - Show a list of the loaded modules\n"); | |
| printf("\tRESTART - Reread the configuration file and restart Apache\n"); | |
| printf("\tSETTINGS - Show current thread status\n"); | |
| printf("\tSHUTDOWN - Shutdown Apache\n"); | |
| printf("\tVERSION - Display the server version information\n"); | |
| } | |
| /* Tell NetWare we handled the command */ | |
| return HANDLEDCOMMAND; | |
| } | |
| /* Tell NetWare that the command isn't mine */ | |
| return NOTMYCOMMAND; | |
| } | |
| static int InstallConsoleHandler(void) | |
| { | |
| /* Our command line handler interfaces the system operator | |
| with this NLM */ | |
| NX_WRAP_INTERFACE(CommandLineInterpreter, 2, (void*)&(ConsoleHandler.parser)); | |
| ConsoleHandler.rTag = AllocateResourceTag(getnlmhandle(), "Command Line Processor", | |
| ConsoleCommandSignature); | |
| if (!ConsoleHandler.rTag) | |
| { | |
| printf("Error on allocate resource tag\n"); | |
| return 1; | |
| } | |
| RegisterConsoleCommand(&ConsoleHandler); | |
| /* The Remove procedure unregisters the console handler */ | |
| return 0; | |
| } | |
| static void RemoveConsoleHandler(void) | |
| { | |
| UnRegisterConsoleCommand(&ConsoleHandler); | |
| NX_UNWRAP_INTERFACE(ConsoleHandler.parser); | |
| } | |
| static const char *set_threads_to_start(cmd_parms *cmd, void *dummy, const char *arg) | |
| { | |
| const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); | |
| if (err != NULL) { | |
| return err; | |
| } | |
| ap_threads_to_start = atoi(arg); | |
| return NULL; | |
| } | |
| static const char *set_min_free_threads(cmd_parms *cmd, void *dummy, const char *arg) | |
| { | |
| const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); | |
| if (err != NULL) { | |
| return err; | |
| } | |
| ap_threads_min_free = atoi(arg); | |
| return NULL; | |
| } | |
| static const char *set_max_free_threads(cmd_parms *cmd, void *dummy, const char *arg) | |
| { | |
| const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); | |
| if (err != NULL) { | |
| return err; | |
| } | |
| ap_threads_max_free = atoi(arg); | |
| return NULL; | |
| } | |
| static const char *set_thread_limit (cmd_parms *cmd, void *dummy, const char *arg) | |
| { | |
| const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); | |
| if (err != NULL) { | |
| return err; | |
| } | |
| ap_threads_limit = atoi(arg); | |
| return NULL; | |
| } | |
| static const command_rec netware_mpm_cmds[] = { | |
| LISTEN_COMMANDS, | |
| AP_INIT_TAKE1("StartThreads", set_threads_to_start, NULL, RSRC_CONF, | |
| "Number of worker threads launched at server startup"), | |
| AP_INIT_TAKE1("MinSpareThreads", set_min_free_threads, NULL, RSRC_CONF, | |
| "Minimum number of idle threads, to handle request spikes"), | |
| AP_INIT_TAKE1("MaxSpareThreads", set_max_free_threads, NULL, RSRC_CONF, | |
| "Maximum number of idle threads"), | |
| AP_INIT_TAKE1("MaxThreads", set_thread_limit, NULL, RSRC_CONF, | |
| "Maximum number of worker threads alive at the same time"), | |
| { NULL } | |
| }; | |
| AP_DECLARE_MODULE(mpm_netware) = { | |
| MPM20_MODULE_STUFF, | |
| netware_rewrite_args, /* hook to run before apache parses args */ | |
| NULL, /* create per-directory config structure */ | |
| NULL, /* merge per-directory config structures */ | |
| NULL, /* create per-server config structure */ | |
| NULL, /* merge per-server config structures */ | |
| netware_mpm_cmds, /* command apr_table_t */ | |
| netware_mpm_hooks, /* register hooks */ | |
| }; |