| # Licensed to the Apache Software Foundation (ASF) under one or more | |
| # contributor license agreements. See the NOTICE file distributed with | |
| # this work for additional information regarding copyright ownership. | |
| # The ASF licenses this file to You under the Apache License, Version 2.0 | |
| # (the "License"); you may not use this file except in compliance with | |
| # the License. You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| # | |
| # Read README.cmake before using this. | |
| # CMAKE_MINIMUM_REQUIRED should be the first directive in the file: | |
| # https://cmake.org/cmake/help/latest/command/cmake_minimum_required.html | |
| CMAKE_MINIMUM_REQUIRED(VERSION 3.16...3.29) | |
| PROJECT(HTTPD C) | |
| INCLUDE(CheckSymbolExists) | |
| INCLUDE(CheckCSourceCompiles) | |
| INCLUDE("build/build-modules-c.cmake") | |
| FIND_PACKAGE(LibXml2) | |
| FIND_PACKAGE(Lua51) | |
| FIND_PACKAGE(OpenSSL) | |
| FIND_PACKAGE(ZLIB) | |
| FIND_PACKAGE(CURL) | |
| FIND_PACKAGE(PCRE2 COMPONENTS 8BIT) | |
| # Options for support libraries not supported by cmake-bundled FindFOO | |
| # Default to using APR trunk (libapr-2.lib) if it exists in PREFIX/lib; | |
| # otherwise, default to APR 1.x + APR-util 1.x | |
| IF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/libapr-2.lib") | |
| SET(default_apr_libraries "${CMAKE_INSTALL_PREFIX}/lib/libapr-2.lib") | |
| ELSEIF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/libapr-1.lib") | |
| SET(ldaplib "${CMAKE_INSTALL_PREFIX}/lib/apr_ldap-1.lib") | |
| IF(NOT EXISTS ${ldaplib}) | |
| SET(ldaplib) | |
| ENDIF() | |
| SET(default_apr_libraries ${CMAKE_INSTALL_PREFIX}/lib/libapr-1.lib ${CMAKE_INSTALL_PREFIX}/lib/libaprutil-1.lib ${ldaplib}) | |
| ELSE() | |
| SET(default_apr_libraries) | |
| ENDIF() | |
| # PCRE names its libraries differently for debug vs. release builds. | |
| # We can't query our own CMAKE_BUILD_TYPE at configure time. | |
| # If the debug version exists in PREFIX/lib, default to that one. | |
| IF(PCRE2_FOUND) | |
| SET(default_pcre_libraries "PCRE2::8BIT") | |
| SET(default_pcre_cflags "-DHAVE_PCRE2") | |
| ELSEIF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/pcre2-8d.lib") | |
| SET(default_pcre_libraries ${CMAKE_INSTALL_PREFIX}/lib/pcre2-8d.lib) | |
| SET(default_pcre_cflags "-DHAVE_PCRE2") | |
| ELSEIF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/pcre2-8.lib") | |
| SET(default_pcre_libraries ${CMAKE_INSTALL_PREFIX}/lib/pcre2-8.lib) | |
| SET(default_pcre_cflags "-DHAVE_PCRE2") | |
| ELSEIF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/pcre2-8d-static.lib") | |
| SET(default_pcre_libraries ${CMAKE_INSTALL_PREFIX}/lib/pcre2-8d-static.lib) | |
| SET(default_pcre_cflags "-DHAVE_PCRE2 -DPCRE2_STATIC") | |
| ELSEIF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/pcre2-8-static.lib") | |
| SET(default_pcre_libraries ${CMAKE_INSTALL_PREFIX}/lib/pcre2-8-static.lib) | |
| SET(default_pcre_cflags "-DHAVE_PCRE2 -DPCRE2_STATIC") | |
| ELSEIF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/pcred.lib") | |
| SET(default_pcre_libraries ${CMAKE_INSTALL_PREFIX}/lib/pcred.lib) | |
| ELSE() | |
| SET(default_pcre_libraries ${CMAKE_INSTALL_PREFIX}/lib/pcre.lib) | |
| ENDIF() | |
| IF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/nghttp2d.lib") | |
| SET(default_nghttp2_libraries "${CMAKE_INSTALL_PREFIX}/lib/nghttp2d.lib") | |
| ELSE() | |
| SET(default_nghttp2_libraries "${CMAKE_INSTALL_PREFIX}/lib/nghttp2.lib") | |
| ENDIF() | |
| IF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/brotlienc.lib") | |
| SET(default_brotli_libraries "${CMAKE_INSTALL_PREFIX}/lib/brotlienc.lib" "${CMAKE_INSTALL_PREFIX}/lib/brotlicommon.lib") | |
| ELSE() | |
| SET(default_brotli_libraries) | |
| ENDIF() | |
| IF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/check.lib") | |
| SET(default_check_libraries "${CMAKE_INSTALL_PREFIX}/lib/check.lib" "${CMAKE_INSTALL_PREFIX}/lib/compat.lib") | |
| ELSE() | |
| SET(default_check_libraries) | |
| ENDIF() | |
| IF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/libcurl_imp.lib") | |
| SET(default_curl_libraries "${CMAKE_INSTALL_PREFIX}/lib/libcurl_imp.lib") | |
| ELSEIF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/libcurl.lib") | |
| SET(default_curl_libraries "${CMAKE_INSTALL_PREFIX}/lib/libcurl.lib") | |
| ELSE() | |
| SET(default_curl_libraries) | |
| ENDIF() | |
| IF(EXISTS "${CMAKE_INSTALL_PREFIX}/lib/jansson.lib") | |
| SET(default_jansson_libraries "${CMAKE_INSTALL_PREFIX}/lib/jansson.lib") | |
| ELSE() | |
| SET(default_jansson_libraries) | |
| ENDIF() | |
| SET(APR_INCLUDE_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE STRING "Directory with APR[-Util] include files") | |
| SET(APR_LIBRARIES ${default_apr_libraries} CACHE STRING "APR libraries to link with") | |
| SET(NGHTTP2_INCLUDE_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE STRING "Directory with NGHTTP2 include files within nghttp2 subdirectory") | |
| SET(NGHTTP2_LIBRARIES ${default_nghttp2_libraries} CACHE STRING "NGHTTP2 libraries to link with") | |
| SET(PCRE_CFLAGS "${default_pcre_cflags}" CACHE STRING "PCRE flags for util_pcre.c compilation") | |
| SET(PCRE_INCLUDE_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE STRING "Directory with PCRE include files") | |
| SET(PCRE_LIBRARIES ${default_pcre_libraries} CACHE STRING "PCRE libraries to link with") | |
| SET(LIBXML2_ICONV_INCLUDE_DIR "" CACHE STRING "Directory with iconv include files for libxml2") | |
| SET(LIBXML2_ICONV_LIBRARIES "" CACHE STRING "iconv libraries to link with for libxml2") | |
| SET(BROTLI_INCLUDE_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE STRING "Directory with include files for Brotli") | |
| SET(BROTLI_LIBRARIES ${default_brotli_libraries} CACHE STRING "Brotli libraries to link with") | |
| SET(CURL_INCLUDE_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE STRING "Directory with include files for cURL") | |
| SET(CURL_LIBRARIES ${default_curl_libraries} CACHE STRING "cURL libraries to link with") | |
| SET(JANSSON_INCLUDE_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE STRING "Directory with include files for jansson") | |
| SET(JANSSON_LIBRARIES "${default_jansson_libraries}" CACHE STRING "Jansson libraries to link with") | |
| SET(CHECK_INCLUDE_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE STRING "Directory with include files for Check") | |
| SET(CHECK_LIBRARIES "${default_check_libraries}" CACHE STRING "Check libraries to link with") | |
| # end support library configuration | |
| # Misc. options | |
| OPTION(INSTALL_PDB "Install .pdb files (if generated)" ON) | |
| OPTION(INSTALL_MANUAL "Install manual" ON) | |
| SET(ENABLE_MODULES "O" CACHE STRING "Minimum module enablement (e.g., \"i\" to build all but those without prerequisites)") | |
| SET(WITH_MODULES "" CACHE STRING "comma-separated paths to single-file modules to statically link into the server") | |
| SET(EXTRA_INCLUDES "" CACHE STRING "Extra include directories") | |
| SET(EXTRA_LIBS "" CACHE STRING "Extra libraries") | |
| SET(EXTRA_COMPILE_FLAGS "" CACHE STRING "Extra compile flags") | |
| IF(NOT EXISTS "${APR_INCLUDE_DIR}/apr.h") | |
| MESSAGE(FATAL_ERROR "APR include directory ${APR_INCLUDE_DIR} is not correct.") | |
| ENDIF() | |
| FOREACH(onelib ${APR_LIBRARIES}) | |
| IF(NOT EXISTS ${onelib}) | |
| MESSAGE(FATAL_ERROR "APR library ${onelib} was not found.") | |
| ENDIF() | |
| ENDFOREACH() | |
| MACRO(GET_MOD_ENABLE_RANK macro_modname macro_mod_enable_val macro_output_rank) | |
| IF(${macro_mod_enable_val} STREQUAL "O") | |
| SET(${macro_output_rank} 0) | |
| ELSEIF(${macro_mod_enable_val} STREQUAL "i") | |
| SET(${macro_output_rank} 1) | |
| ELSEIF(${macro_mod_enable_val} STREQUAL "I") | |
| SET(${macro_output_rank} 2) | |
| ELSEIF(${macro_mod_enable_val} STREQUAL "a") | |
| SET(${macro_output_rank} 3) | |
| ELSEIF(${macro_mod_enable_val} STREQUAL "A") | |
| SET(${macro_output_rank} 4) | |
| ELSE() | |
| MESSAGE(FATAL_ERROR "Unexpected enablement value \"${macro_mod_enable_val}\" for ${macro_modname}") | |
| ENDIF() | |
| ENDMACRO() | |
| GET_MOD_ENABLE_RANK("ENABLE_MODULES setting" ${ENABLE_MODULES} enable_modules_rank) | |
| # Figure out what APR/APU features are available | |
| # | |
| # CHECK_APR_FEATURE checks for features defined to 1 or 0 in apr.h or apu.h | |
| # The symbol representing the feature will be set to TRUE or FALSE for | |
| # compatibility with the feature tests set by FindFooPackage. | |
| # | |
| # (unclear why CHECK_SYMBOL_EXISTS is needed, but I was getting "found" for anything | |
| # not defined to either 1 or 0) | |
| MACRO(CHECK_APR_FEATURE which_define) | |
| SET(CMAKE_REQUIRED_INCLUDES "${APR_INCLUDE_DIR}") | |
| CHECK_SYMBOL_EXISTS(${which_define} "apr.h;apu.h" tmp_${which_define}) | |
| IF(${tmp_${which_define}}) | |
| CHECK_C_SOURCE_COMPILES("#include \"${APR_INCLUDE_DIR}/apr.h\" | |
| #include \"${APR_INCLUDE_DIR}/apu.h\" | |
| int main() { | |
| #ifndef ${which_define} | |
| #error gobble | |
| #endif | |
| #if !${which_define} | |
| #error gobble | |
| #endif | |
| return 1;}" ${which_define}) | |
| ELSE() | |
| SET(${which_define}) | |
| ENDIF() | |
| IF(${${which_define}}) | |
| SET(${which_define} TRUE) | |
| ELSE() | |
| SET(${which_define} FALSE) | |
| ENDIF() | |
| ENDMACRO() | |
| CHECK_APR_FEATURE(APR_HAS_XLATE) | |
| CHECK_APR_FEATURE(APU_HAVE_CRYPTO) | |
| # APR_HAS_LDAP is defined in apr_ldap.h, which exists only in apr 1.x, so use | |
| # special code instead of CHECK_APR_FEATURE() | |
| # As with CHECK_APR_FEATURE(), convert to a TRUE/FALSE result. | |
| CHECK_C_SOURCE_COMPILES("#include \"${APR_INCLUDE_DIR}/apr.h\" | |
| #include \"${APR_INCLUDE_DIR}/apr_ldap.h\" | |
| int main() { | |
| #if !APR_HAS_LDAP | |
| #error gobble | |
| #endif | |
| return 1;}" APR_HAS_LDAP) | |
| IF(${APR_HAS_LDAP}) | |
| SET(APR_HAS_LDAP TRUE) | |
| ELSE() | |
| SET(APR_HAS_LDAP FALSE) | |
| ENDIF() | |
| # See if nghttp2 exists in a configured or defaulted location | |
| SET(NGHTTP2_FOUND TRUE) | |
| IF(EXISTS "${NGHTTP2_INCLUDE_DIR}/nghttp2/nghttp2.h") | |
| FOREACH(onelib ${NGHTTP2_LIBRARIES}) | |
| IF(NOT EXISTS ${onelib}) | |
| SET(NGHTTP2_FOUND FALSE) | |
| ENDIF() | |
| ENDFOREACH() | |
| ELSE() | |
| SET(NGHTTP2_FOUND FALSE) | |
| ENDIF() | |
| # See if we have Brotli | |
| SET(BROTLI_FOUND TRUE) | |
| IF(EXISTS "${BROTLI_INCLUDE_DIR}/brotli/encode.h") | |
| FOREACH(onelib ${BROTLI_LIBRARIES}) | |
| IF(NOT EXISTS ${onelib}) | |
| SET(BROTLI_FOUND FALSE) | |
| ENDIF() | |
| ENDFOREACH() | |
| ELSE() | |
| SET(BROTLI_FOUND FALSE) | |
| ENDIF() | |
| # See if we have Check | |
| SET(CHECK_FOUND TRUE) | |
| IF (EXISTS "${CHECK_INCLUDE_DIR}/check.h") | |
| FOREACH(onelib ${CHECK_LIBRARIES}) | |
| IF(NOT EXISTS "${onelib}") | |
| SET(CHECK_FOUND FALSE) | |
| ENDIF() | |
| ENDFOREACH() | |
| ELSE() | |
| SET(CHECK_FOUND FALSE) | |
| ENDIF() | |
| # See if we have Jansson | |
| SET(JANSSON_FOUND TRUE) | |
| IF(EXISTS "${JANSSON_INCLUDE_DIR}/jansson.h") | |
| FOREACH(onelib ${JANSSON_LIBRARIES}) | |
| IF(NOT EXISTS ${onelib}) | |
| SET(JANSSON_FOUND FALSE) | |
| ENDIF() | |
| ENDFOREACH() | |
| ELSE() | |
| SET(JANSSON_FOUND FALSE) | |
| ENDIF() | |
| MESSAGE(STATUS "") | |
| MESSAGE(STATUS "Summary of feature detection:") | |
| MESSAGE(STATUS "") | |
| MESSAGE(STATUS "LIBXML2_FOUND ............ : ${LIBXML2_FOUND}") | |
| MESSAGE(STATUS "LUA51_FOUND .............. : ${LUA51_FOUND}") | |
| MESSAGE(STATUS "NGHTTP2_FOUND ............ : ${NGHTTP2_FOUND}") | |
| MESSAGE(STATUS "OPENSSL_FOUND ............ : ${OPENSSL_FOUND}") | |
| MESSAGE(STATUS "ZLIB_FOUND ............... : ${ZLIB_FOUND}") | |
| MESSAGE(STATUS "BROTLI_FOUND ............. : ${BROTLI_FOUND}") | |
| MESSAGE(STATUS "CURL_FOUND ............... : ${CURL_FOUND}") | |
| MESSAGE(STATUS "JANSSON_FOUND ............ : ${JANSSON_FOUND}") | |
| MESSAGE(STATUS "CHECK_FOUND .............. : ${CHECK_FOUND}") | |
| MESSAGE(STATUS "APR_HAS_LDAP ............. : ${APR_HAS_LDAP}") | |
| MESSAGE(STATUS "APR_HAS_XLATE ............ : ${APR_HAS_XLATE}") | |
| MESSAGE(STATUS "APU_HAVE_CRYPTO .......... : ${APU_HAVE_CRYPTO}") | |
| MESSAGE(STATUS "") | |
| # Options for each available module | |
| # "A" ("A"ctive) means installed and active in default .conf, fail if can't be built | |
| # "I" ("I"nactive) means installed and inactive (LoadModule commented out) in default .conf, fail if can't be built | |
| # "O" ("O"mit) means not installed, no LoadModule | |
| # "a" - like "A", but ignore with a warning if any prereqs aren't available | |
| # "i" - like "I", but ignore with a warning if any prereqs aren't available | |
| # Current heuristic for default enablement: | |
| # | |
| # Module requires a prereq and -> O | |
| # finding/usingprereq isn't implemented | |
| # yet | |
| # | |
| # Module is included by default in -> a if it has prereqs, A otherwise | |
| # autoconf-based build | |
| # | |
| # Module is included in -> i if it has prereqs, I otherwise | |
| # --enable-modules=most | |
| # | |
| # Otherwise -> O | |
| # | |
| SET(MODULE_LIST | |
| "modules/aaa/mod_access_compat+A+mod_access compatibility" | |
| "modules/aaa/mod_allowhandlers+I+restrict allowed handlers" | |
| "modules/aaa/mod_allowmethods+I+restrict allowed HTTP methods" | |
| "modules/aaa/mod_auth_basic+A+basic authentication" | |
| "modules/aaa/mod_auth_digest+I+RFC2617 Digest authentication" | |
| "modules/aaa/mod_auth_form+I+form authentication" | |
| "modules/aaa/mod_authn_anon+I+anonymous user authentication control" | |
| "modules/aaa/mod_authn_core+A+core authentication module" | |
| "modules/aaa/mod_authn_dbd+I+SQL-based authentication control" | |
| "modules/aaa/mod_authn_dbm+I+DBM-based authentication control" | |
| "modules/aaa/mod_authn_file+A+file-based authentication control" | |
| "modules/aaa/mod_authn_socache+I+Cached authentication control" | |
| "modules/aaa/mod_authnz_fcgi+I+FastCGI authorizer-based authentication and authorization" | |
| "modules/aaa/mod_authnz_ldap+i+LDAP based authentication" | |
| "modules/aaa/mod_authz_core+A+core authorization provider vector module" | |
| "modules/aaa/mod_authz_dbd+I+SQL based authorization and Login/Session support" | |
| "modules/aaa/mod_authz_dbm+I+DBM-based authorization control" | |
| "modules/aaa/mod_authz_groupfile+A+'require group' authorization control" | |
| "modules/aaa/mod_authz_host+A+host-based authorization control" | |
| "modules/aaa/mod_authz_owner+I+'require file-owner' authorization control" | |
| "modules/aaa/mod_authz_user+A+'require user' authorization control" | |
| "modules/arch/win32/mod_isapi+I+isapi extension support" | |
| "modules/cache/mod_cache+I+dynamic file caching. At least one storage management module (e.g. mod_cache_disk) is also necessary." | |
| "modules/cache/mod_cache_disk+I+disk caching module" | |
| "modules/cache/mod_cache_socache+I+shared object caching module" | |
| "modules/cache/mod_file_cache+I+File cache" | |
| "modules/cache/mod_socache_dbm+I+dbm small object cache provider" | |
| "modules/cache/mod_socache_dc+O+distcache small object cache provider" | |
| "modules/cache/mod_socache_memcache+I+memcache small object cache provider" | |
| "modules/cache/mod_socache_shmcb+I+ shmcb small object cache provider" | |
| "modules/cache/mod_socache_redis+I+redis small object cache provider" | |
| "modules/cluster/mod_heartbeat+I+Generates Heartbeats" | |
| "modules/cluster/mod_heartmonitor+I+Collects Heartbeats" | |
| "modules/core/mod_macro+I+Define and use macros in configuration files" | |
| "modules/core/mod_watchdog+I+Watchdog module" | |
| "modules/database/mod_dbd+I+Apache DBD Framework" | |
| "modules/dav/fs/mod_dav_fs+I+DAV provider for the filesystem." | |
| "modules/dav/main/mod_dav+I+WebDAV protocol handling." | |
| "modules/debugging/mod_bucketeer+O+buckets manipulation filter. Useful only for developers and testing purposes." | |
| "modules/debugging/mod_dumpio+I+I/O dump filter" | |
| "modules/debugging/mod_firehose+O+Firehose dump filter" | |
| "modules/echo/mod_echo+O+ECHO server" | |
| "modules/examples/mod_case_filter+O+Example uppercase conversion filter" | |
| "modules/examples/mod_case_filter_in+O+Example uppercase conversion input filter" | |
| "modules/examples/mod_example_hooks+O+Example hook callback handler module" | |
| "modules/examples/mod_example_ipc+O+Example of shared memory and mutex usage" | |
| "modules/filters/mod_brotli+i+Brotli compression support" | |
| "modules/filters/mod_buffer+I+Filter Buffering" | |
| "modules/filters/mod_charset_lite+i+character set translation" | |
| "modules/filters/mod_data+O+RFC2397 data encoder" | |
| "modules/filters/mod_deflate+i+Deflate transfer encoding support" | |
| "modules/filters/mod_ext_filter+I+external filter module" | |
| "modules/filters/mod_filter+A+Smart Filtering" | |
| "modules/filters/mod_include+I+Server Side Includes" | |
| "modules/filters/mod_proxy_html+i+Fix HTML Links in a Reverse Proxy" | |
| "modules/filters/mod_ratelimit+I+Output Bandwidth Limiting" | |
| "modules/filters/mod_reflector+O+Reflect request through the output filter stack" | |
| "modules/filters/mod_reqtimeout+A+Limit time waiting for request from client" | |
| "modules/filters/mod_request+I+Request Body Filtering" | |
| "modules/filters/mod_sed+I+filter request and/or response bodies through sed" | |
| "modules/filters/mod_substitute+I+response content rewrite-like filtering" | |
| "modules/filters/mod_xml2enc+i+i18n support for markup filters" | |
| "modules/generators/mod_asis+I+as-is filetypes" | |
| "modules/generators/mod_autoindex+A+directory listing" | |
| "modules/generators/mod_cgi+I+CGI scripts" | |
| "modules/generators/mod_info+I+server information" | |
| "modules/generators/mod_status+I+process/thread monitoring" | |
| "modules/http/mod_mime+A+mapping of file-extension to MIME. Disabling this module is normally not recommended." | |
| "modules/http2/mod_http2+i+HTTP/2 protocol support" | |
| "modules/ldap/mod_ldap+i+LDAP caching and connection pooling services" | |
| "modules/loggers/mod_log_config+A+logging configuration. You won't be able to log requests to the server without this module." | |
| "modules/loggers/mod_log_debug+I+configurable debug logging" | |
| "modules/loggers/mod_log_forensic+I+forensic logging" | |
| "modules/loggers/mod_logio+I+input and output logging" | |
| "modules/lua/mod_lua+i+Apache Lua Framework" | |
| "modules/md/mod_md+i+Apache Managed Domains (Certificates)" | |
| "modules/mappers/mod_actions+I+Action triggering on requests" | |
| "modules/mappers/mod_alias+A+mapping of requests to different filesystem parts" | |
| "modules/mappers/mod_dir+A+directory request handling" | |
| "modules/mappers/mod_imagemap+I+server-side imagemaps" | |
| "modules/mappers/mod_negotiation+I+content negotiation" | |
| "modules/mappers/mod_rewrite+I+rule based URL manipulation" | |
| "modules/mappers/mod_speling+I+correct common URL misspellings" | |
| "modules/mappers/mod_userdir+I+mapping of requests to user-specific directories" | |
| "modules/mappers/mod_vhost_alias+I+mass virtual hosting module" | |
| "modules/metadata/mod_cern_meta+O+CERN-type meta files" | |
| "modules/metadata/mod_env+A+clearing/setting of ENV vars" | |
| "modules/metadata/mod_expires+I+Expires header control" | |
| "modules/metadata/mod_headers+A+HTTP header control" | |
| "modules/metadata/mod_ident+O+RFC 1413 identity check" | |
| "modules/metadata/mod_mime_magic+I+automagically determining MIME type" | |
| "modules/metadata/mod_remoteip+I+translate header contents to an apparent client remote_ip" | |
| "modules/metadata/mod_setenvif+A+basing ENV vars on headers" | |
| "modules/metadata/mod_unique_id+I+per-request unique ids" | |
| "modules/metadata/mod_usertrack+I+user-session tracking" | |
| "modules/metadata/mod_version+A+determining httpd version in config files" | |
| "modules/proxy/balancers/mod_lbmethod_bybusyness+I+Apache proxy Load balancing by busyness" | |
| "modules/proxy/balancers/mod_lbmethod_byrequests+I+Apache proxy Load balancing by request counting" | |
| "modules/proxy/balancers/mod_lbmethod_bytraffic+I+Apache proxy Load balancing by traffic counting" | |
| "modules/proxy/balancers/mod_lbmethod_heartbeat+I+Apache proxy Load balancing from Heartbeats" | |
| "modules/proxy/mod_proxy_ajp+I+Apache proxy AJP module. Requires and is enabled by --enable-proxy." | |
| "modules/proxy/mod_proxy_balancer+I+Apache proxy BALANCER module. Requires and is enabled by --enable-proxy." | |
| "modules/proxy/mod_proxy+I+Apache proxy module" | |
| "modules/proxy/mod_proxy_connect+I+Apache proxy CONNECT module. Requires and is enabled by --enable-proxy." | |
| "modules/proxy/mod_proxy_express+I+mass reverse-proxy module. Requires --enable-proxy." | |
| "modules/proxy/mod_proxy_fcgi+I+Apache proxy FastCGI module. Requires and is enabled by --enable-proxy." | |
| "modules/proxy/mod_proxy_ftp+I+Apache proxy FTP module. Requires and is enabled by --enable-proxy." | |
| "modules/proxy/mod_proxy_hcheck+I+Apache proxy Health check module. Requires and is enabled by --enable-proxy." | |
| "modules/proxy/mod_proxy_http+I+Apache proxy HTTP module. Requires and is enabled by --enable-proxy." | |
| "modules/proxy/mod_proxy_scgi+I+Apache proxy SCGI module. Requires and is enabled by --enable-proxy." | |
| "modules/proxy/mod_proxy_uwsgi+I+Apache proxy SCGI module. Requires and is enabled by --enable-proxy." | |
| "modules/proxy/mod_proxy_wstunnel+I+Apache proxy Websocket Tunnel module. Requires and is enabled by --enable-proxy." | |
| "modules/http2/mod_proxy_http2+i+Apache proxy HTTP/2 module. Requires --enable-proxy." | |
| "modules/proxy/mod_serf+O+Reverse proxy module using Serf" | |
| "modules/session/mod_session+I+session module" | |
| "modules/session/mod_session_cookie+I+session cookie module" | |
| "modules/session/mod_session_crypto+i+session crypto module" | |
| "modules/session/mod_session_dbd+I+session dbd module" | |
| "modules/slotmem/mod_slotmem_plain+I+slotmem provider that uses plain memory" | |
| "modules/slotmem/mod_slotmem_shm+I+slotmem provider that uses shared memory" | |
| "modules/ssl/mod_ssl+i+SSL/TLS support" | |
| "modules/ssl/mod_ssl_ct+O+Certificate Transparency support (requires OpenSSL >= 1.0.2)" | |
| "modules/test/mod_dialup+O+rate limits static files to dialup modem speeds" | |
| "modules/test/mod_optional_fn_export+O+example optional function exporter" | |
| "modules/test/mod_optional_fn_import+O+example optional function importer" | |
| "modules/test/mod_optional_hook_export+O+example optional hook exporter" | |
| "modules/test/mod_optional_hook_import+O+example optional hook importer" | |
| "modules/test/mod_policy+I+HTTP protocol compliance filters" | |
| ) | |
| IF(BUILD_TEST_MODULES) | |
| LIST(APPEND MODULE_LIST | |
| "test/pyhttpd/mod_aptest/mod_aptest+A+Test module. Useful only for developers and testing purposes." | |
| "test/modules/http1/mod_h1test/mod_h1test+A+Http/1 Test module. Useful only for developers and testing purposes." | |
| "test/modules/http2/mod_h2test/mod_h2test+A+Http/2 Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/authany/mod_authany+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/client_add_filter/mod_client_add_filter+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/eat_post/mod_eat_post+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/echo_post/mod_echo_post+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/echo_post_chunk/mod_echo_post_chunk+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/fold/mod_fold+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/input_body_filter/mod_input_body_filter+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/list_modules/mod_list_modules+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/memory_track/mod_memory_track+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/nntp_like/mod_nntp_like+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/random_chunk/mod_random_chunk+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/test_apr_uri/mod_test_apr_uri+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/test_pass_brigade/mod_test_pass_brigade+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/test_rwrite/mod_test_rwrite+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/test_session/mod_test_session+A+Test module. Useful only for developers and testing purposes." | |
| "test/pytest_suite/c-modules/test_utilities/mod_test_utilities+A+Test module. Useful only for developers and testing purposes." | |
| ) | |
| ENDIF() | |
| IF(BUILD_TEST_MODULES AND OPENSSL_FOUND) | |
| LIST(APPEND MODULE_LIST | |
| "test/pytest_suite/c-modules/test_ssl/mod_test_ssl+A+Test module. Useful only for developers and testing purposes." | |
| ) | |
| ENDIF() | |
| IF(BUILD_TEST_MODULES) | |
| SET(PYTEST_CMODULES_DIR "${CMAKE_SOURCE_DIR}/test/pytest_suite/c-modules") | |
| IF(WIN32) | |
| file(GLOB _python_hints "$ENV{LOCALAPPDATA}/Programs/Python/Python3*" | |
| "$ENV{PROGRAMFILES}/Python3*") | |
| find_program(PYTHON_EXE NAMES py python3 python | |
| HINTS ${_python_hints} | |
| ) | |
| IF(NOT PYTHON_EXE) | |
| MESSAGE(FATAL_ERROR "Python interpreter not found, required for BUILD_TEST_MODULES") | |
| ENDIF() | |
| execute_process( | |
| COMMAND "${PYTHON_EXE}" "${CMAKE_SOURCE_DIR}/test/pytest_suite/gen_test_header.py" "${PYTEST_CMODULES_DIR}/apache_httpd_test.h" | |
| RESULT_VARIABLE _gen_header_rc | |
| ) | |
| IF(NOT _gen_header_rc EQUAL 0) | |
| MESSAGE(FATAL_ERROR "Failed to generate apache_httpd_test.h (exit ${_gen_header_rc})") | |
| ENDIF() | |
| ENDIF() | |
| SET(PYTEST_CMODULE_DEFINES APACHE2 APACHE2_4) | |
| FOREACH(pytest_mod | |
| mod_authany mod_client_add_filter mod_eat_post mod_echo_post | |
| mod_echo_post_chunk mod_fold mod_input_body_filter mod_list_modules | |
| mod_memory_track mod_nntp_like mod_random_chunk mod_test_apr_uri | |
| mod_test_pass_brigade mod_test_rwrite mod_test_session | |
| mod_test_utilities mod_test_ssl) | |
| SET(${pytest_mod}_extra_defines ${PYTEST_CMODULE_DEFINES}) | |
| ENDFOREACH() | |
| SET(mod_test_session_extra_libs mod_session) | |
| # Enable httpd debugging/example modules needed by the test suite. | |
| SET(ENABLE_BUCKETEER "A" CACHE STRING "buckets manipulation filter" FORCE) | |
| SET(ENABLE_CASE_FILTER "A" CACHE STRING "Example uppercase conversion filter" FORCE) | |
| SET(ENABLE_CASE_FILTER_IN "A" CACHE STRING "Example uppercase conversion input filter" FORCE) | |
| ENDIF() | |
| # Track which modules actually built have APIs to link against. | |
| SET(installed_mod_libs_exps) | |
| # Define extra definitions, sources, headers, etc. required by some modules. | |
| # This could be included in the master list of modules above, though it | |
| # certainly would get a lot more unreadable. | |
| SET(mod_authz_dbd_extra_defines AUTHZ_DBD_DECLARE_EXPORT) | |
| SET(mod_authnz_ldap_requires APR_HAS_LDAP) | |
| SET(mod_authnz_ldap_extra_libs mod_ldap) | |
| SET(mod_cache_extra_defines CACHE_DECLARE_EXPORT) | |
| SET(mod_cache_extra_sources | |
| modules/cache/cache_storage.c modules/cache/cache_util.c | |
| ) | |
| SET(mod_cache_install_lib 1) | |
| SET(mod_cache_disk_extra_libs mod_cache) | |
| SET(mod_cache_socache_extra_libs mod_cache) | |
| SET(mod_charset_lite_requires APR_HAS_XLATE) | |
| SET(mod_dav_extra_defines DAV_DECLARE_EXPORT) | |
| SET(mod_dav_extra_sources | |
| modules/dav/main/liveprop.c modules/dav/main/props.c | |
| modules/dav/main/std_liveprop.c modules/dav/main/providers.c | |
| modules/dav/main/util.c modules/dav/main/util_lock.c | |
| modules/dav/main/ms_wdv.c | |
| ) | |
| SET(mod_dav_install_lib 1) | |
| SET(mod_dav_fs_extra_sources | |
| modules/dav/fs/dbm.c modules/dav/fs/lock.c | |
| modules/dav/fs/quota.c modules/dav/fs/repos.c | |
| ) | |
| SET(mod_dav_fs_extra_libs mod_dav) | |
| SET(mod_dbd_extra_defines DBD_DECLARE_EXPORT) | |
| SET(mod_deflate_requires ZLIB_FOUND) | |
| IF(ZLIB_FOUND) | |
| SET(mod_deflate_extra_includes ${ZLIB_INCLUDE_DIR}) | |
| SET(mod_deflate_extra_libs ${ZLIB_LIBRARIES}) | |
| ENDIF() | |
| SET(mod_brotli_requires BROTLI_FOUND) | |
| IF(BROTLI_FOUND) | |
| SET(mod_brotli_extra_includes ${BROTLI_INCLUDE_DIR}) | |
| SET(mod_brotli_extra_libs ${BROTLI_LIBRARIES}) | |
| ENDIF() | |
| SET(mod_firehose_requires SOMEONE_TO_MAKE_IT_COMPILE_ON_WINDOWS) | |
| SET(mod_heartbeat_extra_libs mod_watchdog) | |
| SET(mod_http2_requires NGHTTP2_FOUND) | |
| SET(mod_http2_extra_defines ssize_t=long) | |
| SET(mod_http2_extra_includes ${NGHTTP2_INCLUDE_DIR}) | |
| SET(mod_http2_extra_libs ${NGHTTP2_LIBRARIES}) | |
| SET(mod_http2_extra_sources | |
| modules/http2/h2_bucket_beam.c modules/http2/h2_bucket_eos.c | |
| modules/http2/h2_c1.c modules/http2/h2_c1_io.c | |
| modules/http2/h2_c2.c modules/http2/h2_c2_filter.c | |
| modules/http2/h2_config.c modules/http2/h2_conn_ctx.c | |
| modules/http2/h2_mplx.c modules/http2/h2_headers.c | |
| modules/http2/h2_protocol.c modules/http2/h2_push.c | |
| modules/http2/h2_request.c modules/http2/h2_session.c | |
| modules/http2/h2_stream.c modules/http2/h2_switch.c | |
| modules/http2/h2_util.c modules/http2/h2_workers.c | |
| modules/http2/h2_ws.c | |
| ) | |
| SET(mod_ldap_extra_defines LDAP_DECLARE_EXPORT) | |
| SET(mod_ldap_extra_libs wldap32) | |
| SET(mod_ldap_extra_sources | |
| modules/ldap/util_ldap_cache.c modules/ldap/util_ldap_cache_mgr.c | |
| ) | |
| SET(mod_ldap_main_source modules/ldap/util_ldap.c) | |
| SET(mod_ldap_requires APR_HAS_LDAP) | |
| SET(mod_lua_extra_defines AP_LUA_DECLARE_EXPORT) | |
| SET(mod_lua_extra_includes ${LUA_INCLUDE_DIR}) | |
| SET(mod_lua_extra_libs ${LUA_LIBRARIES}) | |
| SET(mod_lua_extra_sources | |
| modules/lua/lua_apr.c modules/lua/lua_config.c | |
| modules/lua/lua_passwd.c modules/lua/lua_request.c | |
| modules/lua/lua_vmprep.c modules/lua/lua_dbd.c | |
| ) | |
| SET(mod_lua_requires LUA51_FOUND) | |
| SET(mod_md_requires OPENSSL_FOUND CURL_FOUND JANSSON_FOUND) | |
| SET(mod_md_extra_includes ${OPENSSL_INCLUDE_DIR} ${CURL_INCLUDE_DIR} ${JANSSON_INCLUDE_DIR}) | |
| SET(mod_md_extra_libs ${OPENSSL_LIBRARIES} ${CURL_LIBRARIES} ${JANSSON_LIBRARIES} mod_watchdog) | |
| SET(mod_md_extra_sources | |
| modules/md/md_acme.c modules/md/md_acme_acct.c | |
| modules/md/md_acme_authz.c modules/md/md_acme_drive.c | |
| modules/md/md_acmev2_drive.c modules/md/md_event.c | |
| modules/md/md_acme_order.c modules/md/md_core.c | |
| modules/md/md_curl.c modules/md/md_crypt.c | |
| modules/md/md_http.c modules/md/md_json.c | |
| modules/md/md_jws.c modules/md/md_log.c | |
| modules/md/md_result.c modules/md/md_reg.c | |
| modules/md/md_status.c modules/md/md_store.c | |
| modules/md/md_store_fs.c modules/md/md_time.c | |
| modules/md/md_ocsp.c modules/md/md_util.c | |
| modules/md/mod_md_config.c modules/md/mod_md_drive.c | |
| modules/md/mod_md_os.c modules/md/mod_md_status.c | |
| modules/md/mod_md_ocsp.c | |
| ) | |
| SET(mod_optional_hook_export_extra_defines AP_DECLARE_EXPORT) # bogus reuse of core API prefix | |
| SET(mod_proxy_extra_defines PROXY_DECLARE_EXPORT) | |
| SET(mod_proxy_extra_sources modules/proxy/proxy_util.c) | |
| SET(mod_proxy_install_lib 1) | |
| SET(mod_proxy_ajp_extra_sources | |
| modules/proxy/ajp_header.c modules/proxy/ajp_link.c | |
| modules/proxy/ajp_msg.c modules/proxy/ajp_utils.c | |
| ) | |
| SET(mod_proxy_ajp_extra_libs mod_proxy) | |
| SET(mod_proxy_balancer_extra_libs mod_proxy) | |
| SET(mod_proxy_connect_extra_libs mod_proxy) | |
| SET(mod_proxy_express_extra_libs mod_proxy) | |
| SET(mod_proxy_fcgi_extra_libs mod_proxy) | |
| SET(mod_proxy_ftp_extra_libs mod_proxy) | |
| SET(mod_proxy_hcheck_extra_libs mod_proxy) | |
| SET(mod_proxy_http_extra_libs mod_proxy) | |
| SET(mod_proxy_html_requires LIBXML2_FOUND) | |
| IF(LIBXML2_FOUND) | |
| SET(mod_proxy_html_extra_includes "${LIBXML2_INCLUDE_DIR};${LIBXML2_ICONV_INCLUDE_DIR}") | |
| SET(mod_proxy_html_extra_libs "${LIBXML2_LIBRARIES};${LIBXML2_ICONV_LIBRARIES}") | |
| ENDIF() | |
| SET(mod_proxy_scgi_extra_libs mod_proxy) | |
| SET(mod_proxy_uwsgi_extra_libs mod_proxy) | |
| SET(mod_proxy_wstunnel_extra_libs mod_proxy) | |
| SET(mod_lbmethod_bybusyness_extra_libs mod_proxy) | |
| SET(mod_lbmethod_bytraffic_extra_libs mod_proxy) | |
| SET(mod_lbmethod_byrequests_extra_libs mod_proxy) | |
| SET(mod_lbmethod_heartbeat_extra_libs mod_proxy) | |
| SET(mod_proxy_http2_requires NGHTTP2_FOUND) | |
| SET(mod_proxy_http2_extra_defines ssize_t=long) | |
| SET(mod_proxy_http2_extra_includes ${NGHTTP2_INCLUDE_DIR}) | |
| SET(mod_proxy_http2_extra_libs ${NGHTTP2_LIBRARIES} mod_proxy) | |
| SET(mod_proxy_http2_extra_sources | |
| modules/http2/h2_proxy_session.c modules/http2/h2_proxy_util.c | |
| ) | |
| SET(mod_ratelimit_extra_defines AP_RL_DECLARE_EXPORT) | |
| SET(mod_sed_extra_sources | |
| modules/filters/regexp.c modules/filters/sed0.c | |
| modules/filters/sed1.c | |
| ) | |
| SET(mod_serf_requires AN_UNIMPLEMENTED_SUPPORT_LIBRARY_REQUIREMENT) | |
| SET(mod_session_extra_defines SESSION_DECLARE_EXPORT) | |
| SET(mod_session_install_lib 1) | |
| SET(mod_session_cookie_extra_libs mod_session) | |
| SET(mod_session_crypto_requires APU_HAVE_CRYPTO) | |
| SET(mod_session_crypto_extra_libs mod_session) | |
| SET(mod_session_dbd_extra_libs mod_session) | |
| SET(mod_socache_dc_requires AN_UNIMPLEMENTED_SUPPORT_LIBRARY_REQUIREMENT) | |
| SET(mod_ssl_extra_defines SSL_DECLARE_EXPORT) | |
| SET(mod_ssl_requires OPENSSL_FOUND) | |
| IF(OPENSSL_FOUND) | |
| SET(mod_ssl_extra_includes ${OPENSSL_INCLUDE_DIR}) | |
| SET(mod_ssl_extra_libs ${OPENSSL_LIBRARIES}) | |
| ENDIF() | |
| SET(mod_ssl_extra_sources | |
| modules/ssl/ssl_engine_config.c | |
| modules/ssl/ssl_engine_init.c modules/ssl/ssl_engine_io.c | |
| modules/ssl/ssl_engine_kernel.c modules/ssl/ssl_engine_log.c | |
| modules/ssl/ssl_engine_mutex.c modules/ssl/ssl_engine_ocsp.c | |
| modules/ssl/ssl_engine_pphrase.c modules/ssl/ssl_engine_rand.c | |
| modules/ssl/ssl_engine_vars.c modules/ssl/ssl_scache.c | |
| modules/ssl/ssl_util.c modules/ssl/ssl_util_ocsp.c | |
| modules/ssl/ssl_util_ssl.c modules/ssl/ssl_util_stapling.c | |
| ) | |
| IF(OPENSSL_FOUND) | |
| SET(mod_ssl_ct_extra_includes ${OPENSSL_INCLUDE_DIR}) | |
| SET(mod_ssl_ct_extra_libs ${OPENSSL_LIBRARIES}) | |
| ENDIF() | |
| SET(mod_ssl_ct_extra_sources | |
| modules/ssl/ssl_ct_log_config.c | |
| modules/ssl/ssl_ct_sct.c | |
| modules/ssl/ssl_ct_util.c | |
| ) | |
| SET(mod_status_extra_defines STATUS_DECLARE_EXPORT) | |
| SET(mod_watchdog_install_lib 1) | |
| SET(mod_xml2enc_requires LIBXML2_FOUND) | |
| IF(LIBXML2_FOUND) | |
| SET(mod_xml2enc_extra_includes "${LIBXML2_INCLUDE_DIR};${LIBXML2_ICONV_INCLUDE_DIR}") | |
| SET(mod_xml2enc_extra_libs "${LIBXML2_LIBRARIES};${LIBXML2_ICONV_LIBRARIES}") | |
| ENDIF() | |
| SET(mod_watchdog_extra_defines AP_WD_DECLARE_EXPORT) | |
| SET(MODULE_PATHS) | |
| FOREACH (modinfo ${MODULE_LIST}) | |
| STRING(REGEX REPLACE "([^+]*)\\+([^+]*)\\+([^+]*)" "\\1;\\2;\\3" modinfolist ${modinfo}) | |
| SET(path_to_module) | |
| SET(defaultenable) | |
| SET(helptext) | |
| FOREACH(i ${modinfolist}) | |
| IF("${path_to_module}" STREQUAL "") | |
| SET(path_to_module ${i}) | |
| ELSEIF("${defaultenable}" STREQUAL "") | |
| SET(defaultenable ${i}) | |
| ELSEIF("${helptext}" STREQUAL "") | |
| SET(helptext ${i}) | |
| ELSE() | |
| MESSAGE(FATAL_ERROR "Unexpected field or plus sign in >${modinfo}<") | |
| ENDIF() | |
| ENDFOREACH() | |
| # MESSAGE(" path to module: ${path_to_module}") | |
| # MESSAGE("enablement by default: ${defaultenable}") | |
| # MESSAGE(" help text: ${helptext}") | |
| STRING(REGEX REPLACE ".*/(mod_[^\\+]+)" "\\1" mod_name ${path_to_module}) | |
| STRING(REGEX REPLACE "mod_(.*)" "\\1" mod_shortname ${mod_name}) | |
| STRING(TOUPPER "ENABLE_${mod_shortname}" mod_option_name) | |
| SET(${mod_option_name} ${defaultenable} CACHE STRING ${helptext}) | |
| SET(MODULE_PATHS "${MODULE_PATHS};${path_to_module}") | |
| ENDFOREACH() | |
| SET(install_targets) | |
| SET(install_bin_pdb) | |
| SET(install_modules) # special handling vs. other installed targets | |
| SET(install_modules_pdb) | |
| SET(builtin_module_shortnames) | |
| LIST(APPEND builtin_module_shortnames "win32" "mpm_winnt" "http" "so") # core added automatically | |
| SET(extra_builtin_modules) # the ones specified with -DWITH_MODULES= | |
| STRING(REPLACE "," ";" WITH_MODULE_LIST "${WITH_MODULES}") | |
| FOREACH(static_mod ${WITH_MODULE_LIST}) | |
| STRING(REGEX MATCH "[^/]+\\.c" mod_basename ${static_mod}) | |
| STRING(REGEX REPLACE "^mod_(.*)\\.c" "\\1" mod_module_name ${mod_basename}) | |
| LIST(APPEND builtin_module_shortnames "${mod_module_name}") | |
| CONFIGURE_FILE(${static_mod} ${PROJECT_BINARY_DIR}/ COPYONLY) | |
| SET(extra_builtin_modules ${extra_builtin_modules} ${PROJECT_BINARY_DIR}/${mod_basename}) | |
| ENDFOREACH() | |
| generate_builtin_modules_c("${PROJECT_BINARY_DIR}/modules.c" "${builtin_module_shortnames}") | |
| # for easy reference from .dll/.so builds | |
| CONFIGURE_FILE(os/win32/BaseAddr.ref ${PROJECT_BINARY_DIR}/ COPYONLY) | |
| ADD_EXECUTABLE(gen_test_char server/gen_test_char.c) | |
| ADD_CUSTOM_COMMAND( | |
| COMMENT "Generating character tables, test_char.h, for current locale" | |
| DEPENDS gen_test_char | |
| COMMAND $<TARGET_FILE:gen_test_char> > ${PROJECT_BINARY_DIR}/test_char.h | |
| OUTPUT ${PROJECT_BINARY_DIR}/test_char.h | |
| ) | |
| ADD_CUSTOM_TARGET( | |
| test_char_header ALL | |
| DEPENDS ${PROJECT_BINARY_DIR}/test_char.h | |
| ) | |
| SET(HTTPD_MAIN_SOURCES | |
| server/main.c | |
| ) | |
| SET(LIBHTTPD_SOURCES | |
| ${extra_builtin_modules} | |
| ${PROJECT_BINARY_DIR}/modules.c | |
| modules/arch/win32/mod_win32.c | |
| modules/core/mod_so.c | |
| modules/http/byterange_filter.c | |
| modules/http/chunk_filter.c | |
| modules/http/http_core.c | |
| modules/http/http_filters.c | |
| modules/http/http_protocol.c | |
| modules/http/http_request.c | |
| os/win32/ap_regkey.c | |
| os/win32/util_win32.c | |
| server/buildmark.c | |
| server/config.c | |
| server/connection.c | |
| server/core.c | |
| server/core_filters.c | |
| server/eoc_bucket.c | |
| server/eor_bucket.c | |
| server/error_bucket.c | |
| server/headers_bucket.c | |
| server/listen.c | |
| server/log.c | |
| server/mpm/winnt/child.c | |
| server/mpm/winnt/mpm_winnt.c | |
| server/mpm/winnt/nt_eventlog.c | |
| server/mpm/winnt/service.c | |
| server/mpm_common.c | |
| server/protocol.c | |
| server/provider.c | |
| server/request.c | |
| server/ssl.c | |
| server/scoreboard.c | |
| server/util.c | |
| server/util_cfgtree.c | |
| server/util_cookies.c | |
| server/util_debug.c | |
| server/util_etag.c | |
| server/util_expr_eval.c | |
| server/util_expr_parse.c | |
| server/util_fcgi.c | |
| server/util_expr_scan.c | |
| server/util_filter.c | |
| server/util_md5.c | |
| server/util_mutex.c | |
| server/util_pcre.c | |
| server/util_regex.c | |
| server/util_script.c | |
| server/util_time.c | |
| server/util_xml.c | |
| server/vhost.c | |
| ) | |
| CONFIGURE_FILE(os/win32/win32_config_layout.h | |
| ${PROJECT_BINARY_DIR}/ap_config_layout.h) | |
| SET(HTTPD_INCLUDE_DIRECTORIES | |
| ${PROJECT_BINARY_DIR} | |
| ${EXTRA_INCLUDES} | |
| # see discussion in cmake bug 13188 regarding oddities with relative paths | |
| ${CMAKE_CURRENT_SOURCE_DIR}/include | |
| ${CMAKE_CURRENT_SOURCE_DIR}/os/win32 | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/core | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/database | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/dav/main | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/filters | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/generators | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/http2 | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/md | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/proxy | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/session | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/ssl | |
| ${CMAKE_CURRENT_SOURCE_DIR}/server | |
| ${CMAKE_CURRENT_SOURCE_DIR}/server/mpm/winnt | |
| ${APR_INCLUDE_DIR} | |
| ${PCRE_INCLUDE_DIR} | |
| ) | |
| IF(BUILD_TEST_MODULES) | |
| LIST(APPEND HTTPD_INCLUDE_DIRECTORIES | |
| ${CMAKE_CURRENT_SOURCE_DIR}/test/pytest_suite/c-modules | |
| ) | |
| ENDIF() | |
| # The .h files we install from outside the main include directory | |
| # largely parallel the include directories above. | |
| SET(other_installed_h | |
| ${PROJECT_BINARY_DIR}/ap_config_layout.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/os/win32/os.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/cache/mod_cache.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/cache/cache_common.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/core/mod_so.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/core/mod_watchdog.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/database/mod_dbd.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/dav/main/mod_dav.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/filters/mod_include.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/filters/mod_xml2enc.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/generators/mod_cgi.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/generators/mod_status.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/http2/mod_http2.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/loggers/mod_log_config.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/mappers/mod_rewrite.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/proxy/mod_proxy.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/session/mod_session.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/ssl/mod_ssl.h | |
| ${CMAKE_CURRENT_SOURCE_DIR}/modules/ssl/mod_ssl_openssl.h | |
| ) | |
| # When mod_serf is buildable, don't forget to copy modules/proxy/mod_serf.h | |
| INCLUDE_DIRECTORIES(${HTTPD_INCLUDE_DIRECTORIES}) | |
| SET(HTTPD_SYSTEM_LIBS | |
| ws2_32 | |
| mswsock | |
| ) | |
| ########### HTTPD MODULES ############ | |
| SET(LoadModules) | |
| SET(mods_built_and_loaded) | |
| SET(mods_built_but_not_loaded) | |
| SET(mods_omitted) | |
| FOREACH (mod ${MODULE_PATHS}) | |
| # Build different forms of the module name; e.g., | |
| # mod_name->mod_cgi, mod_module_name->cgi_module, mod_shortname->cgi | |
| STRING(REGEX REPLACE ".*/(mod_[^\\+]+)" "\\1" mod_name ${mod}) | |
| STRING(REGEX REPLACE "mod_(.*)" "\\1_module" mod_module_name ${mod_name}) | |
| STRING(REGEX REPLACE "mod_(.*)" "\\1" mod_shortname ${mod_name}) | |
| # Is it enabled? | |
| STRING(TOUPPER "ENABLE_${mod_shortname}" enable_mod) | |
| SET(enable_mod_val ${${enable_mod}}) | |
| # Is ENABLE_MODULES set to a higher value? | |
| GET_MOD_ENABLE_RANK(${mod_name} ${enable_mod_val} this_mod_rank) | |
| IF(this_mod_rank LESS enable_modules_rank) | |
| # Use the value from ENABLE_MODULES | |
| SET(enable_mod_val ${ENABLE_MODULES}) | |
| ENDIF() | |
| IF(NOT ${enable_mod_val} STREQUAL "O") # build of module is desired | |
| SET(mod_requires "${mod_name}_requires") | |
| STRING(TOUPPER ${enable_mod_val} enable_mod_val_upper) | |
| IF(NOT "${${mod_requires}}" STREQUAL "") # module has some prerequisite | |
| FOREACH (required ${${mod_requires}}) | |
| IF(NOT ${required}) # prerequisite doesn't exist | |
| IF(NOT ${enable_mod_val} STREQUAL ${enable_mod_val_upper}) # lower case, so optional based on prereq | |
| MESSAGE(STATUS "${mod_name} was requested but couldn't be built due to a missing prerequisite (${required})") | |
| SET(enable_mod_val_upper "O") # skip due to missing prerequisite | |
| ELSE() # must be upper case "A" or "I" (or coding error above) | |
| MESSAGE(FATAL_ERROR "${mod_name} was requested but couldn't be built due to a missing prerequisite (${required})") | |
| ENDIF() | |
| ENDIF() | |
| ENDFOREACH() | |
| ENDIF() | |
| # map a->A, i->I, O->O for remaining logic since prereq checking is over | |
| SET(enable_mod_val ${enable_mod_val_upper}) | |
| ENDIF() | |
| IF(${enable_mod_val} STREQUAL "O") | |
| # ignore | |
| SET(mods_omitted ${mods_omitted} ${mod_name}) | |
| ELSE() | |
| # Handle whether or not the LoadModule is commented out. | |
| IF(${enable_mod_val} STREQUAL "A") | |
| SET(LoadModules "${LoadModules}LoadModule ${mod_module_name} modules/${mod_name}.so\n") | |
| SET(mods_built_and_loaded ${mods_built_and_loaded} ${mod_name}) | |
| ELSEIF(${enable_mod_val} STREQUAL "I") | |
| SET(LoadModules "${LoadModules}# LoadModule ${mod_module_name} modules/${mod_name}.so\n") | |
| SET(mods_built_but_not_loaded ${mods_built_but_not_loaded} ${mod_name}) | |
| ELSE() | |
| MESSAGE(FATAL_ERROR "${enable_mod} must be set to \"A\", \"I\", or \"O\" instead of \"${enable_mod_val}\"") | |
| ENDIF() | |
| # Handle building it. | |
| SET(mod_main_source "${mod_name}_main_source") | |
| SET(mod_extra_sources "${mod_name}_extra_sources") | |
| IF("${${mod_main_source}}" STREQUAL "") | |
| SET(tmp_mod_main_source "${mod}.c") | |
| ELSE() | |
| SET(tmp_mod_main_source ${${mod_main_source}}) | |
| ENDIF() | |
| SET(all_mod_sources ${tmp_mod_main_source} ${${mod_extra_sources}}) | |
| ADD_LIBRARY(${mod_name} SHARED ${all_mod_sources} build/win32/httpd.rc) | |
| SET(install_modules ${install_modules} ${mod_name}) | |
| SET(install_modules_pdb ${install_modules_pdb} "$<TARGET_PDB_FILE:${mod_name}>") | |
| IF("${${mod_name}_install_lib}") | |
| SET(installed_mod_libs_exps | |
| ${installed_mod_libs_exps} | |
| "$<TARGET_LINKER_FILE:${mod_name}>" | |
| "$<TARGET_LINKER_FILE_DIR:${mod_name}>/${mod_name}.exp" | |
| ) | |
| ENDIF() | |
| SET(mod_extra_libs "${mod_name}_extra_libs") | |
| SET_TARGET_PROPERTIES(${mod_name} PROPERTIES | |
| SUFFIX .so | |
| LINK_FLAGS /base:@${PROJECT_BINARY_DIR}/BaseAddr.ref,${mod_name}.so | |
| ) | |
| TARGET_LINK_LIBRARIES(${mod_name} ${${mod_extra_libs}} libhttpd ${EXTRA_LIBS} ${APR_LIBRARIES} ${HTTPD_SYSTEM_LIBS}) | |
| TARGET_COMPILE_DEFINITIONS(${mod_name} PRIVATE | |
| "LONG_NAME=${mod_name} for Apache HTTP Server" | |
| "BIN_NAME=${mod_name}.so" | |
| ) | |
| TARGET_COMPILE_OPTIONS(${mod_name} PRIVATE "${EXTRA_COMPILE_FLAGS}") | |
| # Extra defines? | |
| SET(mod_extra_defines "${mod_name}_extra_defines") | |
| IF(NOT "${${mod_extra_defines}}" STREQUAL "") | |
| TARGET_COMPILE_DEFINITIONS(${mod_name} PRIVATE ${${mod_extra_defines}}) | |
| ENDIF() | |
| # Extra includes? | |
| SET(mod_extra_includes "${mod_name}_extra_includes") | |
| IF(NOT "${${mod_extra_includes}}" STREQUAL "") | |
| SET(tmp_includes ${HTTPD_INCLUDE_DIRECTORIES} ${${mod_extra_includes}}) | |
| SET_TARGET_PROPERTIES(${mod_name} PROPERTIES INCLUDE_DIRECTORIES "${tmp_includes}") | |
| GET_PROPERTY(tmp_includes TARGET ${mod_name} PROPERTY INCLUDE_DIRECTORIES) | |
| ENDIF() | |
| ENDIF() | |
| ENDFOREACH() | |
| ########### HTTPD LIBRARIES ############ | |
| ADD_LIBRARY(libhttpd SHARED ${LIBHTTPD_SOURCES} build/win32/httpd.rc) | |
| SET_TARGET_PROPERTIES(libhttpd PROPERTIES | |
| LINK_FLAGS /base:@${PROJECT_BINARY_DIR}/BaseAddr.ref,libhttpd.dll | |
| ) | |
| SET(install_targets ${install_targets} libhttpd) | |
| SET(install_bin_pdb ${install_bin_pdb} $<TARGET_PDB_FILE:libhttpd>) | |
| TARGET_LINK_LIBRARIES(libhttpd ${EXTRA_LIBS} ${APR_LIBRARIES} ${PCRE_LIBRARIES} ${HTTPD_SYSTEM_LIBS}) | |
| TARGET_COMPILE_DEFINITIONS(libhttpd PRIVATE | |
| "LONG_NAME=Apache HTTP Server Core" | |
| "BIN_NAME=libhttpd.dll" | |
| "AP_DECLARE_EXPORT" | |
| ) | |
| TARGET_COMPILE_OPTIONS(libhttpd PRIVATE ${PCRE_CFLAGS} ${EXTRA_COMPILE_FLAGS}) | |
| ADD_DEPENDENCIES(libhttpd test_char_header) | |
| ########### HTTPD EXECUTABLES ########## | |
| ADD_EXECUTABLE(httpd server/main.c build/win32/httpd.rc) | |
| SET(install_targets ${install_targets} httpd) | |
| SET(install_bin_pdb ${install_bin_pdb} $<TARGET_PDB_FILE:httpd>) | |
| TARGET_COMPILE_DEFINITIONS(httpd PRIVATE | |
| "APP_FILE" | |
| "LONG_NAME=Apache HTTP Server" | |
| "BIN_NAME=httpd.exe" | |
| "ICON_FILE=${CMAKE_SOURCE_DIR}/build/win32/apache.ico" | |
| ) | |
| TARGET_COMPILE_OPTIONS(httpd PRIVATE "${EXTRA_COMPILE_FLAGS}") | |
| SET_TARGET_PROPERTIES(httpd PROPERTIES | |
| LINK_FLAGS "/stack:0x40000" | |
| ) | |
| TARGET_LINK_LIBRARIES(httpd libhttpd ${EXTRA_LIBS}) | |
| SET(standard_support | |
| htcacheclean | |
| htdbm | |
| htdigest | |
| htpasswd | |
| httxt2dbm | |
| logresolve | |
| rotatelogs | |
| ) | |
| SET(htdbm_extra_sources support/passwd_common.c) | |
| SET(htpasswd_extra_sources support/passwd_common.c) | |
| FOREACH(pgm ${standard_support}) | |
| SET(extra_sources ${pgm}_extra_sources) | |
| ADD_EXECUTABLE(${pgm} support/${pgm}.c ${${extra_sources}} build/win32/httpd.rc) | |
| SET(install_targets ${install_targets} ${pgm}) | |
| SET(install_bin_pdb ${install_bin_pdb} $<TARGET_PDB_FILE:${pgm}>) | |
| TARGET_COMPILE_DEFINITIONS(${pgm} PRIVATE | |
| "APP_FILE" | |
| "LONG_NAME=Apache HTTP Server ${pgm} program" | |
| "BIN_NAME=${pgm}.exe" | |
| ) | |
| TARGET_COMPILE_OPTIONS(${mod_name} PRIVATE "${EXTRA_COMPILE_FLAGS}") | |
| TARGET_LINK_LIBRARIES(${pgm} ${EXTRA_LIBS} ${APR_LIBRARIES}) | |
| ENDFOREACH() | |
| ADD_EXECUTABLE(ab support/ab.c build/win32/httpd.rc) | |
| SET(install_targets ${install_targets} ab) | |
| SET(install_bin_pdb ${install_bin_pdb} $<TARGET_PDB_FILE:ab>) | |
| SET(tmp_includes ${HTTPD_INCLUDE_DIRECTORIES}) | |
| SET_TARGET_PROPERTIES(ab PROPERTIES INCLUDE_DIRECTORIES "${tmp_includes}") | |
| TARGET_COMPILE_DEFINITIONS(ab PRIVATE | |
| "APP_FILE" | |
| "LONG_NAME=Apache HTTP Server ab program" | |
| "BIN_NAME=ab.exe" | |
| ) | |
| TARGET_LINK_LIBRARIES(ab ${EXTRA_LIBS} ${APR_LIBRARIES} Ws2_32.lib) | |
| IF(OPENSSL_FOUND) | |
| ADD_EXECUTABLE(abs support/ab.c build/win32/httpd.rc) | |
| SET(install_targets ${install_targets} abs) | |
| SET(install_bin_pdb ${install_bin_pdb} $<TARGET_PDB_FILE:abs>) | |
| SET_TARGET_PROPERTIES(abs PROPERTIES COMPILE_DEFINITIONS HAVE_OPENSSL) | |
| SET(tmp_includes ${HTTPD_INCLUDE_DIRECTORIES} ${OPENSSL_INCLUDE_DIR}) | |
| SET_TARGET_PROPERTIES(abs PROPERTIES INCLUDE_DIRECTORIES "${tmp_includes}") | |
| TARGET_COMPILE_DEFINITIONS(abs PRIVATE | |
| "APP_FILE" | |
| "LONG_NAME=Apache HTTP Server ab/SSL program" | |
| "BIN_NAME=abs.exe" | |
| ) | |
| TARGET_LINK_LIBRARIES(abs ${EXTRA_LIBS} ${APR_LIBRARIES} ${OPENSSL_LIBRARIES} Ws2_32.lib) | |
| ENDIF() | |
| IF(OPENSSL_FOUND AND CURL_FOUND AND JANSSON_FOUND) | |
| SET(a2md_md_lib_sources | |
| modules/md/md_acme.c modules/md/md_acme_acct.c | |
| modules/md/md_acme_authz.c modules/md/md_acme_drive.c | |
| modules/md/md_acmev2_drive.c modules/md/md_event.c | |
| modules/md/md_acme_order.c modules/md/md_core.c | |
| modules/md/md_curl.c modules/md/md_crypt.c | |
| modules/md/md_http.c modules/md/md_json.c | |
| modules/md/md_jws.c modules/md/md_log.c | |
| modules/md/md_result.c modules/md/md_reg.c | |
| modules/md/md_status.c modules/md/md_store.c | |
| modules/md/md_store_fs.c modules/md/md_time.c | |
| modules/md/md_ocsp.c modules/md/md_util.c | |
| ) | |
| SET(a2md_cmd_sources | |
| support/a2md/md_cmd_main.c | |
| support/a2md/md_cmd_acme.c | |
| support/a2md/md_cmd_reg.c | |
| support/a2md/md_cmd_store.c | |
| ) | |
| ADD_EXECUTABLE(a2md ${a2md_cmd_sources} ${a2md_md_lib_sources} build/win32/httpd.rc) | |
| SET(install_targets ${install_targets} a2md) | |
| SET(install_bin_pdb ${install_bin_pdb} $<TARGET_PDB_FILE:a2md>) | |
| SET(tmp_includes ${HTTPD_INCLUDE_DIRECTORIES} | |
| ${OPENSSL_INCLUDE_DIR} ${CURL_INCLUDE_DIR} ${JANSSON_INCLUDE_DIR} | |
| ${CMAKE_SOURCE_DIR}/modules/md ${CMAKE_SOURCE_DIR}/support/a2md) | |
| SET_TARGET_PROPERTIES(a2md PROPERTIES INCLUDE_DIRECTORIES "${tmp_includes}") | |
| TARGET_COMPILE_DEFINITIONS(a2md PRIVATE | |
| "APP_FILE" | |
| "MD_A2MD_BUILD" | |
| "LONG_NAME=Apache HTTP Server a2md program" | |
| "BIN_NAME=a2md.exe" | |
| ) | |
| TARGET_LINK_LIBRARIES(a2md ${EXTRA_LIBS} ${APR_LIBRARIES} | |
| ${OPENSSL_LIBRARIES} ${CURL_LIBRARIES} ${JANSSON_LIBRARIES}) | |
| ENDIF() | |
| # Unit Test Suite | |
| IF(CHECK_FOUND) | |
| # Get all of the test cases. | |
| # XXX Per CMake documentation, if a test case is added or removed we must | |
| # re-run CMake due to our use of GLOB. TBD if this tradeoff to have | |
| # "plug-and-play" test cases is really worth it. | |
| FILE(GLOB httpdunit_cases "${CMAKE_SOURCE_DIR}/test/unit/*.c") | |
| ADD_EXECUTABLE(httpdunit | |
| test/httpdunit.c | |
| ${httpdunit_cases}) | |
| SET_TARGET_PROPERTIES(httpdunit PROPERTIES | |
| INCLUDE_DIRECTORIES "${HTTPD_INCLUDE_DIRECTORIES} ${CHECK_INCLUDE_DIR}" | |
| # FIXME why does Check need HAVE_STDINT_H on Windows? | |
| COMPILE_FLAGS "-DHAVE_STDINT_H") | |
| TARGET_LINK_LIBRARIES(httpdunit libhttpd ${APR_LIBRARIES} ${CHECK_LIBRARIES}) | |
| # Rules for generating the .tests stubs. | |
| FILE(GENERATE OUTPUT "${CMAKE_BINARY_DIR}/httpdunit_gen_stubs.bat" | |
| CONTENT "perl \"${CMAKE_SOURCE_DIR}/build/httpdunit_gen_stubs.pl\" < %1 > %2") | |
| FILE(MAKE_DIRECTORY "${CMAKE_BINARY_DIR}/test/unit") | |
| FOREACH(case ${httpdunit_cases}) | |
| STRING(REGEX REPLACE "^${CMAKE_SOURCE_DIR}" "${CMAKE_BINARY_DIR}" | |
| stub "${case}") | |
| STRING(REGEX REPLACE "\\.c$" ".tests" | |
| stub "${stub}") | |
| ADD_CUSTOM_COMMAND(TARGET httpdunit | |
| PRE_BUILD | |
| COMMAND "${CMAKE_BINARY_DIR}/httpdunit_gen_stubs.bat" "\"${case}\"" "\"${stub}\"" | |
| BYPRODUCTS "${stub}") | |
| ENDFOREACH() | |
| # Rule for generating the .cases file. | |
| FILE(GENERATE OUTPUT "${CMAKE_BINARY_DIR}/httpdunit_gen_cases.bat" | |
| CONTENT "type \"${CMAKE_SOURCE_DIR}\"\\test\\unit\\*.c 2>NUL | perl \"${CMAKE_SOURCE_DIR}/build/httpdunit_gen_cases.pl\" --declaration > \"${CMAKE_BINARY_DIR}/test/httpdunit.cases\" | |
| type \"${CMAKE_SOURCE_DIR}\"\\test\\unit\\*.c 2>NUL | perl \"${CMAKE_SOURCE_DIR}/build/httpdunit_gen_cases.pl\" >> \"${CMAKE_BINARY_DIR}/test/httpdunit.cases\"") | |
| ADD_CUSTOM_COMMAND(TARGET httpdunit | |
| PRE_BUILD | |
| COMMAND "${CMAKE_BINARY_DIR}/httpdunit_gen_cases.bat" | |
| BYPRODUCTS "${CMAKE_BINARY_DIR}/test/httpdunit.cases") | |
| ENDIF() | |
| # getting duplicate manifest error with ApacheMonitor | |
| # ADD_EXECUTABLE(ApacheMonitor support/win32/ApacheMonitor.c support/win32/ApacheMonitor.rc) | |
| # SET(install_targets ${install_targets} ApacheMonitor) | |
| # SET(install_bin_pdb ${install_bin_pdb} $<TARGET_PDB_FILE:ApacheMonitor>) | |
| # SET_TARGET_PROPERTIES(ApacheMonitor PROPERTIES WIN32_EXECUTABLE TRUE) | |
| # SET_TARGET_PROPERTIES(ApacheMonitor PROPERTIES COMPILE_FLAGS "-DAPP_FILE -DLONG_NAME=ApacheMonitor -DBIN_NAME=ApacheMonitor.exe ${EXTRA_COMPILE_FLAGS}") | |
| # TARGET_LINK_LIBRARIES(ApacheMonitor ${EXTRA_LIBS} ${HTTPD_SYSTEM_LIBS} comctl32 wtsapi32) | |
| ########### CONFIGURATION FILES ########### | |
| # Set up variables used in the .conf file templates | |
| SET(LoadModule "${LoadModules}") | |
| SET(Port "80" CACHE STRING "http port to listen on") | |
| SET(SSLPort "443" CACHE STRING "https port to listen on") | |
| SET(ServerRoot "${CMAKE_INSTALL_PREFIX}") | |
| SET(exp_cgidir "${CMAKE_INSTALL_PREFIX}/cgi-bin") | |
| SET(exp_htdocsdir "${CMAKE_INSTALL_PREFIX}/htdocs") | |
| SET(exp_iconsdir "${CMAKE_INSTALL_PREFIX}/icons") | |
| SET(exp_errordir "${CMAKE_INSTALL_PREFIX}/error") | |
| SET(exp_manualdir "${CMAKE_INSTALL_PREFIX}/manual") | |
| SET(rel_logfiledir "logs") | |
| SET(rel_runtimedir "logs") | |
| SET(rel_sysconfdir "conf") | |
| FILE(GLOB_RECURSE conffiles RELATIVE ${CMAKE_SOURCE_DIR}/docs/conf "docs/conf/*") | |
| FOREACH(template ${conffiles}) | |
| STRING(REPLACE ".conf.in" ".conf" conf "${template}") | |
| FILE(READ "docs/conf/${template}" template_text) | |
| IF(template MATCHES ".conf.in$") | |
| # substitute @var@/@@var@@ in .conf.in | |
| STRING(REPLACE "@@" "@" template_text "${template_text}") | |
| STRING(CONFIGURE "${template_text}" template_text @ONLY) | |
| ENDIF() | |
| FILE(WRITE ${CMAKE_BINARY_DIR}/conf/original/${conf} "${template_text}") | |
| FILE(WRITE ${CMAKE_BINARY_DIR}/conf/${conf} "${template_text}") | |
| ENDFOREACH() | |
| ########### INSTALLATION ########### | |
| INSTALL(TARGETS ${install_targets} | |
| RUNTIME DESTINATION bin | |
| LIBRARY DESTINATION lib | |
| ARCHIVE DESTINATION lib | |
| ) | |
| INSTALL(TARGETS ${install_modules} | |
| RUNTIME DESTINATION modules | |
| ) | |
| IF(INSTALL_PDB) | |
| INSTALL(FILES ${install_bin_pdb} | |
| DESTINATION bin | |
| CONFIGURATIONS RelWithDebInfo Debug) | |
| INSTALL(FILES ${install_modules_pdb} | |
| DESTINATION modules | |
| CONFIGURATIONS RelWithDebInfo Debug) | |
| ENDIF() | |
| INSTALL(DIRECTORY include/ DESTINATION include | |
| FILES_MATCHING PATTERN "*.h" | |
| ) | |
| INSTALL(FILES ${other_installed_h} DESTINATION include) | |
| INSTALL(FILES ${installed_mod_libs_exps} DESTINATION lib) | |
| INSTALL(FILES "$<TARGET_LINKER_FILE_DIR:libhttpd>/libhttpd.exp" DESTINATION LIB) | |
| INSTALL(FILES support/ctlogconfig DESTINATION bin) | |
| IF(INSTALL_MANUAL) # Silly? This takes a while, and a dev doesn't need it. | |
| INSTALL(DIRECTORY docs/manual/ DESTINATION manual) | |
| ENDIF() | |
| INSTALL(DIRECTORY DESTINATION logs) | |
| INSTALL(DIRECTORY DESTINATION cgi-bin) | |
| # Copy error, htdocs, icons only if the destination dir doesn't exist yet | |
| # (same semantics as cpR_noreplace.pl ifdestmissing, without Perl) | |
| INSTALL(CODE " | |
| if(NOT IS_DIRECTORY \"${CMAKE_INSTALL_PREFIX}/error\") | |
| file(INSTALL \"${CMAKE_CURRENT_SOURCE_DIR}/docs/error/\" DESTINATION \"${CMAKE_INSTALL_PREFIX}/error\") | |
| endif() | |
| ") | |
| INSTALL(CODE " | |
| if(NOT IS_DIRECTORY \"${CMAKE_INSTALL_PREFIX}/htdocs\") | |
| file(INSTALL \"${CMAKE_CURRENT_SOURCE_DIR}/docs/docroot/\" DESTINATION \"${CMAKE_INSTALL_PREFIX}/htdocs\") | |
| endif() | |
| ") | |
| INSTALL(CODE " | |
| if(NOT IS_DIRECTORY \"${CMAKE_INSTALL_PREFIX}/icons\") | |
| file(INSTALL \"${CMAKE_CURRENT_SOURCE_DIR}/docs/icons/\" DESTINATION \"${CMAKE_INSTALL_PREFIX}/icons\") | |
| endif() | |
| ") | |
| # Copy generated .conf files from the build directory to the install, | |
| # without overwriting stuff already there (no Perl dependency). | |
| INSTALL(CODE " | |
| file(GLOB_RECURSE _conf_files \"${CMAKE_BINARY_DIR}/conf/*\") | |
| foreach(_f \${_conf_files}) | |
| # Skip conf/original/ — handled separately below | |
| string(FIND \"\${_f}\" \"/conf/original/\" _is_original) | |
| if(NOT \${_is_original} EQUAL -1) | |
| continue() | |
| endif() | |
| file(RELATIVE_PATH _rel \"${CMAKE_BINARY_DIR}/conf\" \"\${_f}\") | |
| set(_dest \"${CMAKE_INSTALL_PREFIX}/conf/\${_rel}\") | |
| if(NOT EXISTS \"\${_dest}\") | |
| get_filename_component(_dest_dir \"\${_dest}\" DIRECTORY) | |
| file(COPY \"\${_f}\" DESTINATION \"\${_dest_dir}\") | |
| endif() | |
| endforeach() | |
| ") | |
| # But conf/original is supposed to be overwritten. | |
| INSTALL(DIRECTORY "${CMAKE_BINARY_DIR}/conf/original/" | |
| DESTINATION conf/original) | |
| STRING(TOUPPER "${CMAKE_BUILD_TYPE}" buildtype) | |
| MESSAGE(STATUS "") | |
| MESSAGE(STATUS "") | |
| MESSAGE(STATUS "Apache httpd configuration summary:") | |
| MESSAGE(STATUS "") | |
| MESSAGE(STATUS " Build type ...................... : ${CMAKE_BUILD_TYPE}") | |
| MESSAGE(STATUS " Install .pdb (if available)...... : ${INSTALL_PDB}") | |
| MESSAGE(STATUS " Install manual .................. : ${INSTALL_MANUAL}") | |
| MESSAGE(STATUS " Install prefix .................. : ${CMAKE_INSTALL_PREFIX}") | |
| MESSAGE(STATUS " C compiler ...................... : ${CMAKE_C_COMPILER}") | |
| MESSAGE(STATUS " APR include directory ........... : ${APR_INCLUDE_DIR}") | |
| MESSAGE(STATUS " APR libraries ................... : ${APR_LIBRARIES}") | |
| MESSAGE(STATUS " OpenSSL include directory ....... : ${OPENSSL_INCLUDE_DIR}") | |
| MESSAGE(STATUS " OpenSSL libraries ............... : ${OPENSSL_LIBRARIES}") | |
| MESSAGE(STATUS " PCRE include directory .......... : ${PCRE_INCLUDE_DIR}") | |
| MESSAGE(STATUS " PCRE libraries .................. : ${PCRE_LIBRARIES}") | |
| MESSAGE(STATUS " libxml2 iconv prereq include dir. : ${LIBXML2_ICONV_INCLUDE_DIR}") | |
| MESSAGE(STATUS " libxml2 iconv prereq libraries .. : ${LIBXML2_ICONV_LIBRARIES}") | |
| MESSAGE(STATUS " Brotli include directory......... : ${BROTLI_INCLUDE_DIR}") | |
| MESSAGE(STATUS " Brotli libraries ................ : ${BROTLI_LIBRARIES}") | |
| MESSAGE(STATUS " Check include directory.......... : ${CHECK_INCLUDE_DIR}") | |
| MESSAGE(STATUS " Check libraries ................. : ${CHECK_LIBRARIES}") | |
| MESSAGE(STATUS " Curl include directory........... : ${CURL_INCLUDE_DIR}") | |
| MESSAGE(STATUS " Curl libraries .................. : ${CURL_LIBRARIES}") | |
| MESSAGE(STATUS " Jansson include directory ....... : ${JANSSON_INCLUDE_DIR}") | |
| MESSAGE(STATUS " Jansson libraries ............... : ${JANSSON_LIBRARIES}") | |
| MESSAGE(STATUS " Extra include directories ....... : ${EXTRA_INCLUDES}") | |
| MESSAGE(STATUS " Extra compile flags ............. : ${EXTRA_COMPILE_FLAGS}") | |
| MESSAGE(STATUS " Extra libraries ................. : ${EXTRA_LIBS}") | |
| MESSAGE(STATUS " Modules built and loaded:") | |
| FOREACH(mod ${mods_built_and_loaded}) | |
| MESSAGE(STATUS " ${mod}") | |
| ENDFOREACH() | |
| MESSAGE(STATUS " Modules built but not loaded:") | |
| FOREACH(mod ${mods_built_but_not_loaded}) | |
| MESSAGE(STATUS " ${mod}") | |
| ENDFOREACH() | |
| MESSAGE(STATUS " Modules not built:") | |
| FOREACH(mod ${mods_omitted}) | |
| MESSAGE(STATUS " ${mod}") | |
| ENDFOREACH() |