| /* Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file http_log.h |
| * @brief Apache Logging library |
| * |
| * @defgroup APACHE_CORE_LOG Logging library |
| * @ingroup APACHE_CORE |
| * @{ |
| */ |
| |
| #ifndef APACHE_HTTP_LOG_H |
| #define APACHE_HTTP_LOG_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #include "apr_thread_proc.h" |
| |
| #ifdef HAVE_SYSLOG |
| #include <syslog.h> |
| |
| #include "http_config.h" |
| |
| #ifndef LOG_PRIMASK |
| #define LOG_PRIMASK 7 |
| #endif |
| |
| #define APLOG_EMERG LOG_EMERG /* system is unusable */ |
| #define APLOG_ALERT LOG_ALERT /* action must be taken immediately */ |
| #define APLOG_CRIT LOG_CRIT /* critical conditions */ |
| #define APLOG_ERR LOG_ERR /* error conditions */ |
| #define APLOG_WARNING LOG_WARNING /* warning conditions */ |
| #define APLOG_NOTICE LOG_NOTICE /* normal but significant condition */ |
| #define APLOG_INFO LOG_INFO /* informational */ |
| #define APLOG_DEBUG LOG_DEBUG /* debug-level messages */ |
| #define APLOG_TRACE1 (LOG_DEBUG + 1) /* trace-level 1 messages */ |
| #define APLOG_TRACE2 (LOG_DEBUG + 2) /* trace-level 2 messages */ |
| #define APLOG_TRACE3 (LOG_DEBUG + 3) /* trace-level 3 messages */ |
| #define APLOG_TRACE4 (LOG_DEBUG + 4) /* trace-level 4 messages */ |
| #define APLOG_TRACE5 (LOG_DEBUG + 5) /* trace-level 5 messages */ |
| #define APLOG_TRACE6 (LOG_DEBUG + 6) /* trace-level 6 messages */ |
| #define APLOG_TRACE7 (LOG_DEBUG + 7) /* trace-level 7 messages */ |
| #define APLOG_TRACE8 (LOG_DEBUG + 8) /* trace-level 8 messages */ |
| |
| #define APLOG_LEVELMASK 15 /* mask off the level value */ |
| |
| #else |
| |
| #define APLOG_EMERG 0 /* system is unusable */ |
| #define APLOG_ALERT 1 /* action must be taken immediately */ |
| #define APLOG_CRIT 2 /* critical conditions */ |
| #define APLOG_ERR 3 /* error conditions */ |
| #define APLOG_WARNING 4 /* warning conditions */ |
| #define APLOG_NOTICE 5 /* normal but significant condition */ |
| #define APLOG_INFO 6 /* informational */ |
| #define APLOG_DEBUG 7 /* debug-level messages */ |
| #define APLOG_TRACE1 8 /* trace-level 1 messages */ |
| #define APLOG_TRACE2 9 /* trace-level 2 messages */ |
| #define APLOG_TRACE3 10 /* trace-level 3 messages */ |
| #define APLOG_TRACE4 11 /* trace-level 4 messages */ |
| #define APLOG_TRACE5 12 /* trace-level 5 messages */ |
| #define APLOG_TRACE6 13 /* trace-level 6 messages */ |
| #define APLOG_TRACE7 14 /* trace-level 7 messages */ |
| #define APLOG_TRACE8 15 /* trace-level 8 messages */ |
| |
| #define APLOG_LEVELMASK 15 /* mask off the level value */ |
| |
| #endif |
| |
| /* APLOG_NOERRNO is ignored and should not be used. It will be |
| * removed in a future release of Apache. |
| */ |
| #define APLOG_NOERRNO (APLOG_LEVELMASK + 1) |
| |
| /* Use APLOG_TOCLIENT on ap_log_rerror() to give content |
| * handlers the option of including the error text in the |
| * ErrorDocument sent back to the client. Setting APLOG_TOCLIENT |
| * will cause the error text to be saved in the request_rec->notes |
| * table, keyed to the string "error-notes", if and only if: |
| * - the severity level of the message is APLOG_WARNING or greater |
| * - there are no other "error-notes" set in request_rec->notes |
| * Once error-notes is set, it is up to the content handler to |
| * determine whether this text should be sent back to the client. |
| * Note: Client generated text streams sent back to the client MUST |
| * be escaped to prevent CSS attacks. |
| */ |
| #define APLOG_TOCLIENT ((APLOG_LEVELMASK + 1) * 2) |
| |
| /* normal but significant condition on startup, usually printed to stderr */ |
| #define APLOG_STARTUP ((APLOG_LEVELMASK + 1) * 4) |
| |
| #ifndef DEFAULT_LOGLEVEL |
| #define DEFAULT_LOGLEVEL APLOG_WARNING |
| #endif |
| |
| #define APLOG_NO_MODULE -1 |
| |
| /* |
| * Objects with static storage duration are set to NULL if not |
| * initialized explicitly. This means if aplog_module_index |
| * is not initalized using the APLOG_USE_MODULE or the |
| * AP_DECLARE_MODULE macro, we can safely fall back to |
| * use APLOG_NO_MODULE. |
| */ |
| static int * const aplog_module_index; |
| #define APLOG_MODULE_INDEX \ |
| (aplog_module_index ? *aplog_module_index : APLOG_NO_MODULE) |
| |
| /* |
| * APLOG_MAX_LOGLEVEL can be used to remove logging above some |
| * specified level at compile time. |
| */ |
| #ifndef APLOG_MAX_LOGLEVEL |
| #define APLOG_MODULE_IS_LEVEL(s,module_index,level) \ |
| ( (((level)&APLOG_LEVELMASK) <= APLOG_NOTICE) || \ |
| (s == NULL) || \ |
| (ap_get_server_module_loglevel(s, module_index) \ |
| >= ((level)&APLOG_LEVELMASK) ) ) |
| #define APLOG_C_MODULE_IS_LEVEL(c,module_index,level) \ |
| ( (((level)&APLOG_LEVELMASK) <= APLOG_NOTICE) || \ |
| (ap_get_conn_module_loglevel(c, module_index) \ |
| >= ((level)&APLOG_LEVELMASK) ) ) |
| #define APLOG_R_MODULE_IS_LEVEL(r,module_index,level) \ |
| ( (((level)&APLOG_LEVELMASK) <= APLOG_NOTICE) || \ |
| (ap_get_request_module_loglevel(r, module_index) \ |
| >= ((level)&APLOG_LEVELMASK) ) ) |
| #else |
| #define APLOG_MODULE_IS_LEVEL(s,module_index,level) \ |
| ( (((level)&APLOG_LEVELMASK) <= APLOG_MAX_LOGLEVEL) && \ |
| ( (((level)&APLOG_LEVELMASK) <= APLOG_NOTICE) || \ |
| (s == NULL) || \ |
| (ap_get_server_module_loglevel(s, module_index) \ |
| >= ((level)&APLOG_LEVELMASK) ) ) ) |
| #define APLOG_C_MODULE_IS_LEVEL(c,module_index,level) \ |
| ( (((level)&APLOG_LEVELMASK) <= APLOG_MAX_LOGLEVEL) && \ |
| ( (((level)&APLOG_LEVELMASK) <= APLOG_NOTICE) || \ |
| (ap_get_conn_module_loglevel(c, module_index) \ |
| >= ((level)&APLOG_LEVELMASK) ) ) ) |
| #define APLOG_R_MODULE_IS_LEVEL(r,module_index,level) \ |
| ( (((level)&APLOG_LEVELMASK) <= APLOG_MAX_LOGLEVEL) && \ |
| ( (((level)&APLOG_LEVELMASK) <= APLOG_NOTICE) || \ |
| (ap_get_request_module_loglevel(r, module_index) \ |
| >= ((level)&APLOG_LEVELMASK) ) ) ) |
| #endif |
| |
| #define APLOG_IS_LEVEL(s,level) \ |
| APLOG_MODULE_IS_LEVEL(s,APLOG_MODULE_INDEX,level) |
| #define APLOG_C_IS_LEVEL(c,level) \ |
| APLOG_C_MODULE_IS_LEVEL(c,APLOG_MODULE_INDEX,level) |
| #define APLOG_R_IS_LEVEL(r,level) \ |
| APLOG_R_MODULE_IS_LEVEL(r,APLOG_MODULE_INDEX,level) |
| |
| |
| #define APLOGinfo(s) APLOG_IS_LEVEL(s,APLOG_INFO) |
| #define APLOGdebug(s) APLOG_IS_LEVEL(s,APLOG_DEBUG) |
| #define APLOGtrace1(s) APLOG_IS_LEVEL(s,APLOG_TRACE1) |
| #define APLOGtrace2(s) APLOG_IS_LEVEL(s,APLOG_TRACE2) |
| #define APLOGtrace3(s) APLOG_IS_LEVEL(s,APLOG_TRACE3) |
| #define APLOGtrace4(s) APLOG_IS_LEVEL(s,APLOG_TRACE4) |
| #define APLOGtrace5(s) APLOG_IS_LEVEL(s,APLOG_TRACE5) |
| #define APLOGtrace6(s) APLOG_IS_LEVEL(s,APLOG_TRACE6) |
| #define APLOGtrace7(s) APLOG_IS_LEVEL(s,APLOG_TRACE7) |
| #define APLOGtrace8(s) APLOG_IS_LEVEL(s,APLOG_TRACE8) |
| |
| #define APLOGrinfo(r) APLOG_R_IS_LEVEL(r,APLOG_INFO) |
| #define APLOGrdebug(r) APLOG_R_IS_LEVEL(r,APLOG_DEBUG) |
| #define APLOGrtrace1(r) APLOG_R_IS_LEVEL(r,APLOG_TRACE1) |
| #define APLOGrtrace2(r) APLOG_R_IS_LEVEL(r,APLOG_TRACE2) |
| #define APLOGrtrace3(r) APLOG_R_IS_LEVEL(r,APLOG_TRACE3) |
| #define APLOGrtrace4(r) APLOG_R_IS_LEVEL(r,APLOG_TRACE4) |
| #define APLOGrtrace5(r) APLOG_R_IS_LEVEL(r,APLOG_TRACE5) |
| #define APLOGrtrace6(r) APLOG_R_IS_LEVEL(r,APLOG_TRACE6) |
| #define APLOGrtrace7(r) APLOG_R_IS_LEVEL(r,APLOG_TRACE7) |
| #define APLOGrtrace8(r) APLOG_R_IS_LEVEL(r,APLOG_TRACE8) |
| |
| #define APLOGcinfo(c) APLOG_C_IS_LEVEL(c,APLOG_INFO) |
| #define APLOGcdebug(c) APLOG_C_IS_LEVEL(c,APLOG_DEBUG) |
| #define APLOGctrace1(c) APLOG_C_IS_LEVEL(c,APLOG_TRACE1) |
| #define APLOGctrace2(c) APLOG_C_IS_LEVEL(c,APLOG_TRACE2) |
| #define APLOGctrace3(c) APLOG_C_IS_LEVEL(c,APLOG_TRACE3) |
| #define APLOGctrace4(c) APLOG_C_IS_LEVEL(c,APLOG_TRACE4) |
| #define APLOGctrace5(c) APLOG_C_IS_LEVEL(c,APLOG_TRACE5) |
| #define APLOGctrace6(c) APLOG_C_IS_LEVEL(c,APLOG_TRACE6) |
| #define APLOGctrace7(c) APLOG_C_IS_LEVEL(c,APLOG_TRACE7) |
| #define APLOGctrace8(c) APLOG_C_IS_LEVEL(c,APLOG_TRACE8) |
| |
| extern int AP_DECLARE_DATA ap_default_loglevel; |
| |
| #define APLOG_MARK __FILE__,__LINE__,APLOG_MODULE_INDEX |
| |
| /** |
| * Set up for logging to stderr. |
| * @param p The pool to allocate out of |
| */ |
| AP_DECLARE(void) ap_open_stderr_log(apr_pool_t *p); |
| |
| /** |
| * Replace logging to stderr with logging to the given file. |
| * @param p The pool to allocate out of |
| * @param file Name of the file to log stderr output |
| */ |
| AP_DECLARE(apr_status_t) ap_replace_stderr_log(apr_pool_t *p, |
| const char *file); |
| |
| /** |
| * Open the error log and replace stderr with it. |
| * @param pconf Not used |
| * @param plog The pool to allocate the logs from |
| * @param ptemp Pool used for temporary allocations |
| * @param s_main The main server |
| * @note ap_open_logs isn't expected to be used by modules, it is |
| * an internal core function |
| */ |
| int ap_open_logs(apr_pool_t *pconf, apr_pool_t *plog, |
| apr_pool_t *ptemp, server_rec *s_main); |
| |
| /** |
| * Perform special processing for piped loggers in MPM child |
| * processes. |
| * @param p Not used |
| * @param s Not used |
| * @note ap_logs_child_init is not for use by modules; it is an |
| * internal core function |
| */ |
| void ap_logs_child_init(apr_pool_t *p, server_rec *s); |
| |
| /* |
| * The primary logging functions, ap_log_error, ap_log_rerror, ap_log_cerror, |
| * and ap_log_perror use a printf style format string to build the log message. |
| * It is VERY IMPORTANT that you not include any raw data from the network, |
| * such as the request-URI or request header fields, within the format |
| * string. Doing so makes the server vulnerable to a denial-of-service |
| * attack and other messy behavior. Instead, use a simple format string |
| * like "%s", followed by the string containing the untrusted data. |
| */ |
| |
| /** |
| * ap_log_error() - log messages which are not related to a particular |
| * request or connection. This uses a printf-like format to log messages |
| * to the error_log. |
| * @param file The file in which this function is called |
| * @param line The line number on which this function is called |
| * @param module_index The module_index of the module generating this message |
| * @param level The level of this error message |
| * @param status The status code from the previous command |
| * @param s The server on which we are logging |
| * @param fmt The format string |
| * @param ... The arguments to use to fill out fmt. |
| * @note Use APLOG_MARK to fill out file and line |
| * @note If a request_rec is available, use that with ap_log_rerror() |
| * in preference to calling this function. Otherwise, if a conn_rec is |
| * available, use that with ap_log_cerror() in preference to calling |
| * this function. |
| * @warning It is VERY IMPORTANT that you not include any raw data from |
| * the network, such as the request-URI or request header fields, within |
| * the format string. Doing so makes the server vulnerable to a |
| * denial-of-service attack and other messy behavior. Instead, use a |
| * simple format string like "%s", followed by the string containing the |
| * untrusted data. |
| */ |
| #if __STDC_VERSION__ >= 199901L |
| /* need additional step to expand APLOG_MARK first */ |
| #define ap_log_error(...) ap_log_error__(__VA_ARGS__) |
| /* need server_rec *sr = ... for the case if s is verbatim NULL */ |
| #define ap_log_error__(file, line, mi, level, status, s, ...) \ |
| do { server_rec *sr = s; if (APLOG_MODULE_IS_LEVEL(sr, mi, level)) \ |
| ap_log_error_(file, line, mi, level, status, sr, __VA_ARGS__); \ |
| } while(0) |
| #else |
| #define ap_log_error ap_log_error_ |
| #endif |
| AP_DECLARE(void) ap_log_error_(const char *file, int line, int module_index, |
| int level, apr_status_t status, |
| const server_rec *s, const char *fmt, ...) |
| __attribute__((format(printf,7,8))); |
| |
| /** |
| * ap_log_perror() - log messages which are not related to a particular |
| * request, connection, or virtual server. This uses a printf-like |
| * format to log messages to the error_log. |
| * @param file The file in which this function is called |
| * @param line The line number on which this function is called |
| * @param module_index ignored dummy value for use by APLOG_MARK |
| * @param level The level of this error message |
| * @param status The status code from the previous command |
| * @param p The pool which we are logging for |
| * @param fmt The format string |
| * @param ... The arguments to use to fill out fmt. |
| * @note Use APLOG_MARK to fill out file and line |
| * @warning It is VERY IMPORTANT that you not include any raw data from |
| * the network, such as the request-URI or request header fields, within |
| * the format string. Doing so makes the server vulnerable to a |
| * denial-of-service attack and other messy behavior. Instead, use a |
| * simple format string like "%s", followed by the string containing the |
| * untrusted data. |
| */ |
| #if __STDC_VERSION__ >= 199901L && defined(APLOG_MAX_LOGLEVEL) |
| /* need additional step to expand APLOG_MARK first */ |
| #define ap_log_perror(...) ap_log_perror__(__VA_ARGS__) |
| #define ap_log_perror__(file, line, mi, level, status, p, ...) \ |
| do { if ((level) <= APLOG_MAX_LOGLEVEL ) \ |
| ap_log_perror_(file, line, mi, level, status, p, \ |
| __VA_ARGS__); } while(0) |
| #else |
| #define ap_log_perror ap_log_perror_ |
| #endif |
| AP_DECLARE(void) ap_log_perror_(const char *file, int line, int module_index, |
| int level, apr_status_t status, apr_pool_t *p, |
| const char *fmt, ...) |
| __attribute__((format(printf,7,8))); |
| |
| /** |
| * ap_log_rerror() - log messages which are related to a particular |
| * request. This uses a a printf-like format to log messages to the |
| * error_log. |
| * @param file The file in which this function is called |
| * @param line The line number on which this function is called |
| * @param module_index The module_index of the module generating this message |
| * @param level The level of this error message |
| * @param status The status code from the previous command |
| * @param r The request which we are logging for |
| * @param fmt The format string |
| * @param ... The arguments to use to fill out fmt. |
| * @note Use APLOG_MARK to fill out file and line |
| * @warning It is VERY IMPORTANT that you not include any raw data from |
| * the network, such as the request-URI or request header fields, within |
| * the format string. Doing so makes the server vulnerable to a |
| * denial-of-service attack and other messy behavior. Instead, use a |
| * simple format string like "%s", followed by the string containing the |
| * untrusted data. |
| */ |
| #if __STDC_VERSION__ >= 199901L |
| /* need additional step to expand APLOG_MARK first */ |
| #define ap_log_rerror(...) ap_log_rerror__(__VA_ARGS__) |
| #define ap_log_rerror__(file, line, mi, level, status, r, ...) \ |
| do { if (APLOG_MODULE_IS_LEVEL(r->server, mi, level)) \ |
| ap_log_rerror_(file, line, mi, level, status, r, __VA_ARGS__); \ |
| } while(0) |
| #else |
| #define ap_log_rerror ap_log_rerror_ |
| #endif |
| AP_DECLARE(void) ap_log_rerror_(const char *file, int line, int module_index, |
| int level, apr_status_t status, |
| const request_rec *r, const char *fmt, ...) |
| __attribute__((format(printf,7,8))); |
| |
| /** |
| * ap_log_cerror() - log messages which are related to a particular |
| * connection. This uses a a printf-like format to log messages to the |
| * error_log. |
| * @param file The file in which this function is called |
| * @param line The line number on which this function is called |
| * @param level The level of this error message |
| * @param module_index The module_index of the module generating this message |
| * @param status The status code from the previous command |
| * @param c The connection which we are logging for |
| * @param fmt The format string |
| * @param ... The arguments to use to fill out fmt. |
| * @note Use APLOG_MARK to fill out file and line |
| * @note If a request_rec is available, use that with ap_log_rerror() |
| * in preference to calling this function. |
| * @warning It is VERY IMPORTANT that you not include any raw data from |
| * the network, such as the request-URI or request header fields, within |
| * the format string. Doing so makes the server vulnerable to a |
| * denial-of-service attack and other messy behavior. Instead, use a |
| * simple format string like "%s", followed by the string containing the |
| * untrusted data. |
| */ |
| #if __STDC_VERSION__ >= 199901L |
| /* need additional step to expand APLOG_MARK first */ |
| #define ap_log_cerror(...) ap_log_cerror__(__VA_ARGS__) |
| #define ap_log_cerror__(file, line, mi, level, status, c, ...) \ |
| do { if (APLOG_MODULE_IS_LEVEL(c->base_server, mi, level)) \ |
| ap_log_cerror_(file, line, mi, level, status, c, __VA_ARGS__); \ |
| } while(0) |
| #else |
| #define ap_log_cerror ap_log_cerror_ |
| #endif |
| AP_DECLARE(void) ap_log_cerror_(const char *file, int line, int module_level, |
| int level, apr_status_t status, |
| const conn_rec *c, const char *fmt, ...) |
| __attribute__((format(printf,7,8))); |
| |
| /** |
| * Convert stderr to the error log |
| * @param s The current server |
| */ |
| AP_DECLARE(void) ap_error_log2stderr(server_rec *s); |
| |
| /** |
| * Log the command line used to start the server. |
| * @param p The pool to use for logging |
| * @param s The server_rec whose process's command line we want to log. |
| * The command line is logged to that server's error log. |
| */ |
| AP_DECLARE(void) ap_log_command_line(apr_pool_t *p, server_rec *s); |
| |
| /** |
| * Log the current pid of the parent process |
| * @param p The pool to use for logging |
| * @param fname The name of the file to log to |
| */ |
| AP_DECLARE(void) ap_log_pid(apr_pool_t *p, const char *fname); |
| |
| /** |
| * Retrieve the pid from a pidfile. |
| * @param p The pool to use for logging |
| * @param filename The name of the file containing the pid |
| * @param mypid Pointer to pid_t (valid only if return APR_SUCCESS) |
| */ |
| AP_DECLARE(apr_status_t) ap_read_pid(apr_pool_t *p, const char *filename, pid_t *mypid); |
| |
| /** @see piped_log */ |
| typedef struct piped_log piped_log; |
| |
| /** |
| * Open the piped log process |
| * @param p The pool to allocate out of |
| * @param program The program to run in the logging process |
| * @return The piped log structure |
| * @note The log program is invoked as @p APR_PROGRAM_ENV, |
| * @see ap_open_piped_log_ex to modify this behavior |
| */ |
| AP_DECLARE(piped_log *) ap_open_piped_log(apr_pool_t *p, const char *program); |
| |
| /** |
| * Open the piped log process specifying the execution choice for program |
| * @param p The pool to allocate out of |
| * @param program The program to run in the logging process |
| * @param cmdtype How to invoke program, e.g. APR_PROGRAM, APR_SHELLCMD_ENV, etc |
| * @return The piped log structure |
| */ |
| AP_DECLARE(piped_log *) ap_open_piped_log_ex(apr_pool_t *p, |
| const char *program, |
| apr_cmdtype_e cmdtype); |
| |
| /** |
| * Close the piped log and kill the logging process |
| * @param pl The piped log structure |
| */ |
| AP_DECLARE(void) ap_close_piped_log(piped_log *pl); |
| |
| /** |
| * A function to return the read side of the piped log pipe |
| * @param pl The piped log structure |
| * @return The native file descriptor |
| */ |
| AP_DECLARE(apr_file_t *) ap_piped_log_read_fd(piped_log *pl); |
| |
| /** |
| * A function to return the write side of the piped log pipe |
| * @param pl The piped log structure |
| * @return The native file descriptor |
| */ |
| AP_DECLARE(apr_file_t *) ap_piped_log_write_fd(piped_log *pl); |
| |
| /** |
| * hook method to log error messages |
| * @ingroup hooks |
| * @param file The file in which this function is called |
| * @param line The line number on which this function is called |
| * @param module_index The module_index of the module generating this message |
| * @param level The level of this error message |
| * @param status The status code from the previous command |
| * @param s The server which we are logging for |
| * @param r The request which we are logging for |
| * @param pool Memory pool to allocate from |
| * @param errstr message to log |
| */ |
| AP_DECLARE_HOOK(void, error_log, (const char *file, int line, |
| int module_index, int level, |
| apr_status_t status, const server_rec *s, |
| const request_rec *r, apr_pool_t *pool, |
| const char *errstr)) |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* !APACHE_HTTP_LOG_H */ |
| /** @} */ |