| /* Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* _ _ |
| * _ __ ___ ___ __| | ___ ___| | mod_ssl |
| * | '_ ` _ \ / _ \ / _` | / __/ __| | Apache Interface to OpenSSL |
| * | | | | | | (_) | (_| | \__ \__ \ | |
| * |_| |_| |_|\___/ \__,_|___|___/___/_| |
| * |_____| |
| * ssl_engine_pphrase.c |
| * Pass Phrase Dialog |
| */ |
| /* ``Treat your password like your |
| toothbrush. Don't let anybody |
| else use it, and get a new one |
| every six months.'' |
| -- Clifford Stoll */ |
| #include "ssl_private.h" |
| |
| typedef struct { |
| server_rec *s; |
| apr_pool_t *p; |
| apr_array_header_t *aPassPhrase; |
| int nPassPhraseCur; |
| char *cpPassPhraseCur; |
| int nPassPhraseDialog; |
| int nPassPhraseDialogCur; |
| BOOL bPassPhraseDialogOnce; |
| const char *key_id; |
| const char *pkey_file; |
| } pphrase_cb_arg_t; |
| |
| /* |
| * Return true if the named file exists and is readable |
| */ |
| |
| static apr_status_t exists_and_readable(const char *fname, apr_pool_t *pool, |
| apr_time_t *mtime) |
| { |
| apr_status_t stat; |
| apr_finfo_t sbuf; |
| apr_file_t *fd; |
| |
| if ((stat = apr_stat(&sbuf, fname, APR_FINFO_MIN, pool)) != APR_SUCCESS) |
| return stat; |
| |
| if (sbuf.filetype != APR_REG) |
| return APR_EGENERAL; |
| |
| if ((stat = apr_file_open(&fd, fname, APR_READ, 0, pool)) != APR_SUCCESS) |
| return stat; |
| |
| if (mtime) { |
| *mtime = sbuf.mtime; |
| } |
| |
| apr_file_close(fd); |
| return APR_SUCCESS; |
| } |
| |
| /* |
| * reuse vhost keys for asn1 tables where keys are allocated out |
| * of s->process->pool to prevent "leaking" each time we format |
| * a vhost key. since the key is stored in a table with lifetime |
| * of s->process->pool, the key needs to have the same lifetime. |
| * |
| * XXX: probably seems silly to use a hash table with keys and values |
| * being the same, but it is easier than doing a linear search |
| * and will make it easier to remove keys if needed in the future. |
| * also have the problem with apr_array_header_t that if we |
| * underestimate the number of vhost keys when we apr_array_make(), |
| * the array will get resized when we push past the initial number |
| * of elts. this resizing in the s->process->pool means "leaking" |
| * since apr_array_push() will apr_alloc arr->nalloc * 2 elts, |
| * leaving the original arr->elts to waste. |
| */ |
| static const char *asn1_table_vhost_key(SSLModConfigRec *mc, apr_pool_t *p, |
| const char *id, int i) |
| { |
| /* 'p' pool used here is cleared on restarts (or sooner) */ |
| char *key = apr_psprintf(p, "%s:%d", id, i); |
| void *keyptr = apr_hash_get(mc->tVHostKeys, key, |
| APR_HASH_KEY_STRING); |
| |
| if (!keyptr) { |
| /* make a copy out of s->process->pool */ |
| keyptr = apr_pstrdup(mc->pPool, key); |
| apr_hash_set(mc->tVHostKeys, keyptr, |
| APR_HASH_KEY_STRING, keyptr); |
| } |
| |
| return (char *)keyptr; |
| } |
| |
| /* _________________________________________________________________ |
| ** |
| ** Pass Phrase and Private Key Handling |
| ** _________________________________________________________________ |
| */ |
| |
| #define BUILTIN_DIALOG_BACKOFF 2 |
| #define BUILTIN_DIALOG_RETRIES 5 |
| |
| static apr_file_t *writetty = NULL; |
| static apr_file_t *readtty = NULL; |
| |
| int ssl_pphrase_Handle_CB(char *, int, int, void *); |
| |
| static char *pphrase_array_get(apr_array_header_t *arr, int idx) |
| { |
| if ((idx < 0) || (idx >= arr->nelts)) { |
| return NULL; |
| } |
| |
| return ((char **)arr->elts)[idx]; |
| } |
| |
| apr_status_t ssl_load_encrypted_pkey(server_rec *s, apr_pool_t *p, int idx, |
| const char *pkey_file, |
| apr_array_header_t **pphrases) |
| { |
| SSLModConfigRec *mc = myModConfig(s); |
| SSLSrvConfigRec *sc = mySrvConfig(s); |
| const char *key_id = asn1_table_vhost_key(mc, p, sc->vhost_id, idx); |
| EVP_PKEY *pPrivateKey = NULL; |
| ssl_asn1_t *asn1; |
| int nPassPhrase = (*pphrases)->nelts; |
| int nPassPhraseRetry = 0; |
| apr_time_t pkey_mtime = 0; |
| apr_status_t rv; |
| pphrase_cb_arg_t ppcb_arg; |
| |
| if (!pkey_file) { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, 0, s, APLOGNO(02573) |
| "Init: No private key specified for %s", key_id); |
| return ssl_die(s); |
| } |
| else if ((rv = exists_and_readable(pkey_file, p, &pkey_mtime)) |
| != APR_SUCCESS ) { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, rv, s, APLOGNO(02574) |
| "Init: Can't open server private key file %s", pkey_file); |
| return ssl_die(s); |
| } |
| |
| ppcb_arg.s = s; |
| ppcb_arg.p = p; |
| ppcb_arg.aPassPhrase = *pphrases; |
| ppcb_arg.nPassPhraseCur = 0; |
| ppcb_arg.cpPassPhraseCur = NULL; |
| ppcb_arg.nPassPhraseDialog = 0; |
| ppcb_arg.nPassPhraseDialogCur = 0; |
| ppcb_arg.bPassPhraseDialogOnce = TRUE; |
| ppcb_arg.key_id = key_id; |
| ppcb_arg.pkey_file = pkey_file; |
| |
| /* |
| * if the private key is encrypted and SSLPassPhraseDialog |
| * is configured to "builtin" it isn't possible to prompt for |
| * a password after httpd has detached from the tty. |
| * in this case if we already have a private key and the |
| * file name/mtime hasn't changed, then reuse the existing key. |
| * we also reuse existing private keys that were encrypted for |
| * exec: and pipe: dialogs to minimize chances to snoop the |
| * password. that and pipe: dialogs might prompt the user |
| * for password, which on win32 for example could happen 4 |
| * times at startup. twice for each child and twice within |
| * each since apache "restarts itself" on startup. |
| * of course this will not work for the builtin dialog if |
| * the server was started without LoadModule ssl_module |
| * configured, then restarted with it configured. |
| * but we fall through with a chance of success if the key |
| * is not encrypted or can be handled via exec or pipe dialog. |
| * and in the case of fallthrough, pkey_mtime and isatty() |
| * are used to give a better idea as to what failed. |
| */ |
| if (pkey_mtime) { |
| ssl_asn1_t *asn1 = ssl_asn1_table_get(mc->tPrivateKey, key_id); |
| if (asn1 && (asn1->source_mtime == pkey_mtime)) { |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, s, APLOGNO(02575) |
| "Reusing existing private key from %s on restart", |
| ppcb_arg.pkey_file); |
| return APR_SUCCESS; |
| } |
| } |
| |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, s, APLOGNO(02576) |
| "Attempting to load encrypted (?) private key %s", key_id); |
| |
| for (;;) { |
| /* |
| * Try to read the private key file with the help of |
| * the callback function which serves the pass |
| * phrases to OpenSSL |
| */ |
| |
| ppcb_arg.cpPassPhraseCur = NULL; |
| |
| /* Ensure that the error stack is empty; some SSL |
| * functions will fail spuriously if the error stack |
| * is not empty. */ |
| ERR_clear_error(); |
| |
| pPrivateKey = modssl_read_privatekey(ppcb_arg.pkey_file, |
| ssl_pphrase_Handle_CB, &ppcb_arg); |
| /* If the private key was successfully read, nothing more to |
| do here. */ |
| if (pPrivateKey != NULL) |
| break; |
| |
| /* |
| * when we have more remembered pass phrases |
| * try to reuse these first. |
| */ |
| if (ppcb_arg.nPassPhraseCur < nPassPhrase) { |
| ppcb_arg.nPassPhraseCur++; |
| continue; |
| } |
| |
| /* |
| * else it's not readable and we have no more |
| * remembered pass phrases. Then this has to mean |
| * that the callback function popped up the dialog |
| * but a wrong pass phrase was entered. We give the |
| * user (but not the dialog program) a few more |
| * chances... |
| */ |
| #ifndef WIN32 |
| if ((sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN |
| || sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE) |
| #else |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE |
| #endif |
| && ppcb_arg.cpPassPhraseCur != NULL |
| && nPassPhraseRetry < BUILTIN_DIALOG_RETRIES ) { |
| apr_file_printf(writetty, "Apache:mod_ssl:Error: Pass phrase incorrect " |
| "(%d more retr%s permitted).\n", |
| (BUILTIN_DIALOG_RETRIES-nPassPhraseRetry), |
| (BUILTIN_DIALOG_RETRIES-nPassPhraseRetry) == 1 ? "y" : "ies"); |
| nPassPhraseRetry++; |
| if (nPassPhraseRetry > BUILTIN_DIALOG_BACKOFF) |
| apr_sleep((nPassPhraseRetry-BUILTIN_DIALOG_BACKOFF) |
| * 5 * APR_USEC_PER_SEC); |
| continue; |
| } |
| #ifdef WIN32 |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN) { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, 0, s, APLOGNO(02577) |
| "Init: SSLPassPhraseDialog builtin is not " |
| "supported on Win32 (key file " |
| "%s)", ppcb_arg.pkey_file); |
| return ssl_die(s); |
| } |
| #endif /* WIN32 */ |
| |
| /* |
| * Ok, anything else now means a fatal error. |
| */ |
| if (ppcb_arg.cpPassPhraseCur == NULL) { |
| if (ppcb_arg.nPassPhraseDialogCur && pkey_mtime && |
| !isatty(fileno(stdout))) /* XXX: apr_isatty() */ |
| { |
| ap_log_error(APLOG_MARK, APLOG_ERR, 0, |
| s, APLOGNO(02578) |
| "Init: Unable to read pass phrase " |
| "[Hint: key introduced or changed " |
| "before restart?]"); |
| ssl_log_ssl_error(SSLLOG_MARK, APLOG_ERR, s); |
| } |
| else { |
| ap_log_error(APLOG_MARK, APLOG_ERR, 0, |
| s, APLOGNO(02579) "Init: Private key not found"); |
| ssl_log_ssl_error(SSLLOG_MARK, APLOG_ERR, s); |
| } |
| if (writetty) { |
| apr_file_printf(writetty, "Apache:mod_ssl:Error: Private key not found.\n"); |
| apr_file_printf(writetty, "**Stopped\n"); |
| } |
| } |
| else { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, 0, s, APLOGNO(02580) |
| "Init: Pass phrase incorrect for key %s", |
| key_id); |
| ssl_log_ssl_error(SSLLOG_MARK, APLOG_EMERG, s); |
| |
| if (writetty) { |
| apr_file_printf(writetty, "Apache:mod_ssl:Error: Pass phrase incorrect.\n"); |
| apr_file_printf(writetty, "**Stopped\n"); |
| } |
| } |
| return ssl_die(s); |
| } |
| |
| if (pPrivateKey == NULL) { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, 0, s, APLOGNO(02581) |
| "Init: Unable to read server private key from file %s", |
| ppcb_arg.pkey_file); |
| ssl_log_ssl_error(SSLLOG_MARK, APLOG_EMERG, s); |
| return ssl_die(s); |
| } |
| |
| /* |
| * Log the type of reading |
| */ |
| if (ppcb_arg.nPassPhraseDialogCur == 0) { |
| ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, s, APLOGNO(02582) |
| "unencrypted %s private key - pass phrase not " |
| "required", key_id); |
| } |
| else { |
| if (ppcb_arg.cpPassPhraseCur != NULL) { |
| ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, |
| s, APLOGNO(02583) |
| "encrypted %s private key - pass phrase " |
| "requested", key_id); |
| } |
| else { |
| ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, |
| s, APLOGNO(02584) |
| "encrypted %s private key - pass phrase" |
| " reused", key_id); |
| } |
| } |
| |
| /* |
| * Ok, when we have one more pass phrase store it |
| */ |
| if (ppcb_arg.cpPassPhraseCur != NULL) { |
| *(const char **)apr_array_push(ppcb_arg.aPassPhrase) = |
| ppcb_arg.cpPassPhraseCur; |
| nPassPhrase++; |
| } |
| |
| /* Cache the private key in the global module configuration so it |
| * can be used after subsequent reloads. */ |
| asn1 = ssl_asn1_table_set(mc->tPrivateKey, key_id, pPrivateKey); |
| |
| if (ppcb_arg.nPassPhraseDialogCur != 0) { |
| /* remember mtime of encrypted keys */ |
| asn1->source_mtime = pkey_mtime; |
| } |
| |
| /* |
| * Free the private key structure |
| */ |
| EVP_PKEY_free(pPrivateKey); |
| |
| /* |
| * Let the user know when we're successful. |
| */ |
| if ((ppcb_arg.nPassPhraseDialog > 0) && |
| (ppcb_arg.cpPassPhraseCur != NULL)) { |
| if (writetty) { |
| apr_file_printf(writetty, "\n" |
| "OK: Pass Phrase Dialog successful.\n"); |
| } |
| } |
| |
| /* Close the pipes if they were opened |
| */ |
| if (readtty) { |
| apr_file_close(readtty); |
| apr_file_close(writetty); |
| readtty = writetty = NULL; |
| } |
| |
| return APR_SUCCESS; |
| } |
| |
| static apr_status_t ssl_pipe_child_create(apr_pool_t *p, const char *progname) |
| { |
| /* Child process code for 'ErrorLog "|..."'; |
| * may want a common framework for this, since I expect it will |
| * be common for other foo-loggers to want this sort of thing... |
| */ |
| apr_status_t rc; |
| apr_procattr_t *procattr; |
| apr_proc_t *procnew; |
| |
| if (((rc = apr_procattr_create(&procattr, p)) == APR_SUCCESS) && |
| ((rc = apr_procattr_io_set(procattr, |
| APR_FULL_BLOCK, |
| APR_FULL_BLOCK, |
| APR_NO_PIPE)) == APR_SUCCESS)) { |
| char **args; |
| |
| apr_tokenize_to_argv(progname, &args, p); |
| procnew = (apr_proc_t *)apr_pcalloc(p, sizeof(*procnew)); |
| rc = apr_proc_create(procnew, args[0], (const char * const *)args, |
| NULL, procattr, p); |
| if (rc == APR_SUCCESS) { |
| /* XXX: not sure if we aught to... |
| * apr_pool_note_subprocess(p, procnew, APR_KILL_AFTER_TIMEOUT); |
| */ |
| writetty = procnew->in; |
| readtty = procnew->out; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int pipe_get_passwd_cb(char *buf, int length, char *prompt, int verify) |
| { |
| apr_status_t rc; |
| char *p; |
| |
| apr_file_puts(prompt, writetty); |
| |
| buf[0]='\0'; |
| rc = apr_file_gets(buf, length, readtty); |
| apr_file_puts(APR_EOL_STR, writetty); |
| |
| if (rc != APR_SUCCESS || apr_file_eof(readtty)) { |
| memset(buf, 0, length); |
| return 1; /* failure */ |
| } |
| if ((p = strchr(buf, '\n')) != NULL) { |
| *p = '\0'; |
| } |
| #ifdef WIN32 |
| /* XXX: apr_sometest */ |
| if ((p = strchr(buf, '\r')) != NULL) { |
| *p = '\0'; |
| } |
| #endif |
| return 0; |
| } |
| |
| int ssl_pphrase_Handle_CB(char *buf, int bufsize, int verify, void *srv) |
| { |
| pphrase_cb_arg_t *ppcb_arg = (pphrase_cb_arg_t *)srv; |
| SSLSrvConfigRec *sc = mySrvConfig(ppcb_arg->s); |
| char *cpp; |
| int len = -1; |
| |
| ppcb_arg->nPassPhraseDialog++; |
| ppcb_arg->nPassPhraseDialogCur++; |
| |
| /* |
| * When remembered pass phrases are available use them... |
| */ |
| if ((cpp = pphrase_array_get(ppcb_arg->aPassPhrase, |
| ppcb_arg->nPassPhraseCur)) != NULL) { |
| apr_cpystrn(buf, cpp, bufsize); |
| len = strlen(buf); |
| return len; |
| } |
| |
| /* |
| * Builtin or Pipe dialog |
| */ |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN |
| || sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE) { |
| char *prompt; |
| int i; |
| |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE) { |
| if (!readtty) { |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ppcb_arg->s, |
| APLOGNO(01965) |
| "Init: Creating pass phrase dialog pipe child " |
| "'%s'", sc->server->pphrase_dialog_path); |
| if (ssl_pipe_child_create(ppcb_arg->p, |
| sc->server->pphrase_dialog_path) |
| != APR_SUCCESS) { |
| ap_log_error(APLOG_MARK, APLOG_ERR, 0, ppcb_arg->s, |
| APLOGNO(01966) |
| "Init: Failed to create pass phrase pipe '%s'", |
| sc->server->pphrase_dialog_path); |
| PEMerr(PEM_F_PEM_DEF_CALLBACK, |
| PEM_R_PROBLEMS_GETTING_PASSWORD); |
| memset(buf, 0, (unsigned int)bufsize); |
| return (-1); |
| } |
| } |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ppcb_arg->s, APLOGNO(01967) |
| "Init: Requesting pass phrase via piped dialog"); |
| } |
| else { /* sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN */ |
| #ifdef WIN32 |
| PEMerr(PEM_F_PEM_DEF_CALLBACK, PEM_R_PROBLEMS_GETTING_PASSWORD); |
| memset(buf, 0, (unsigned int)bufsize); |
| return (-1); |
| #else |
| /* |
| * stderr has already been redirected to the error_log. |
| * rather than attempting to temporarily rehook it to the terminal, |
| * we print the prompt to stdout before EVP_read_pw_string turns |
| * off tty echo |
| */ |
| apr_file_open_stdout(&writetty, ppcb_arg->p); |
| |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ppcb_arg->s, APLOGNO(01968) |
| "Init: Requesting pass phrase via builtin terminal " |
| "dialog"); |
| #endif |
| } |
| |
| /* |
| * The first time display a header to inform the user about what |
| * program he actually speaks to, which module is responsible for |
| * this terminal dialog and why to the hell he has to enter |
| * something... |
| */ |
| if (ppcb_arg->nPassPhraseDialog == 1) { |
| apr_file_printf(writetty, "%s mod_ssl (Pass Phrase Dialog)\n", |
| AP_SERVER_BASEVERSION); |
| apr_file_printf(writetty, "Some of your private key files are encrypted for security reasons.\n"); |
| apr_file_printf(writetty, "In order to read them you have to provide the pass phrases.\n"); |
| } |
| if (ppcb_arg->bPassPhraseDialogOnce) { |
| ppcb_arg->bPassPhraseDialogOnce = FALSE; |
| apr_file_printf(writetty, "\n"); |
| apr_file_printf(writetty, "Private key %s (%s)\n", |
| ppcb_arg->key_id, ppcb_arg->pkey_file); |
| } |
| |
| /* |
| * Emulate the OpenSSL internal pass phrase dialog |
| * (see crypto/pem/pem_lib.c:def_callback() for details) |
| */ |
| prompt = "Enter pass phrase:"; |
| |
| for (;;) { |
| apr_file_puts(prompt, writetty); |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE) { |
| i = pipe_get_passwd_cb(buf, bufsize, "", FALSE); |
| } |
| else { /* sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN */ |
| i = EVP_read_pw_string(buf, bufsize, "", FALSE); |
| } |
| if (i != 0) { |
| PEMerr(PEM_F_PEM_DEF_CALLBACK,PEM_R_PROBLEMS_GETTING_PASSWORD); |
| memset(buf, 0, (unsigned int)bufsize); |
| return (-1); |
| } |
| len = strlen(buf); |
| if (len < 1) |
| apr_file_printf(writetty, "Apache:mod_ssl:Error: Pass phrase empty (needs to be at least 1 character).\n"); |
| else |
| break; |
| } |
| } |
| |
| /* |
| * Filter program |
| */ |
| else if (sc->server->pphrase_dialog_type == SSL_PPTYPE_FILTER) { |
| const char *cmd = sc->server->pphrase_dialog_path; |
| const char **argv = apr_palloc(ppcb_arg->p, sizeof(char *) * 3); |
| char *result; |
| |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ppcb_arg->s, APLOGNO(01969) |
| "Init: Requesting pass phrase from dialog filter " |
| "program (%s)", cmd); |
| |
| argv[0] = cmd; |
| argv[1] = ppcb_arg->key_id; |
| argv[2] = NULL; |
| |
| result = ssl_util_readfilter(ppcb_arg->s, ppcb_arg->p, cmd, argv); |
| apr_cpystrn(buf, result, bufsize); |
| len = strlen(buf); |
| } |
| |
| /* |
| * Ok, we now have the pass phrase, so give it back |
| */ |
| ppcb_arg->cpPassPhraseCur = apr_pstrdup(ppcb_arg->p, buf); |
| |
| /* |
| * And return its length to OpenSSL... |
| */ |
| return (len); |
| } |
| |
| #if defined(HAVE_OPENSSL_ENGINE_H) && defined(HAVE_ENGINE_INIT) |
| |
| /* OpenSSL UI implementation for passphrase entry; largely duplicated |
| * from ssl_pphrase_Handle_CB but adjusted for UI API. TODO: Might be |
| * worth trying to shift pphrase handling over to the UI API |
| * completely. */ |
| static int passphrase_ui_open(UI *ui) |
| { |
| pphrase_cb_arg_t *ppcb = UI_get0_user_data(ui); |
| SSLSrvConfigRec *sc = mySrvConfig(ppcb->s); |
| |
| ppcb->nPassPhraseDialog++; |
| ppcb->nPassPhraseDialogCur++; |
| |
| /* |
| * Builtin or Pipe dialog |
| */ |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN |
| || sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE) { |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE) { |
| if (!readtty) { |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ppcb->s, |
| APLOGNO(10143) |
| "Init: Creating pass phrase dialog pipe child " |
| "'%s'", sc->server->pphrase_dialog_path); |
| if (ssl_pipe_child_create(ppcb->p, |
| sc->server->pphrase_dialog_path) |
| != APR_SUCCESS) { |
| ap_log_error(APLOG_MARK, APLOG_ERR, 0, ppcb->s, |
| APLOGNO(10144) |
| "Init: Failed to create pass phrase pipe '%s'", |
| sc->server->pphrase_dialog_path); |
| return 0; |
| } |
| } |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ppcb->s, APLOGNO(10145) |
| "Init: Requesting pass phrase via piped dialog"); |
| } |
| else { /* sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN */ |
| #ifdef WIN32 |
| ap_log_error(APLOG_MARK, APLOG_ERR, 0, ppcb->s, APLOGNO(10146) |
| "Init: Failed to create pass phrase pipe '%s'", |
| sc->server->pphrase_dialog_path); |
| return 0; |
| #else |
| /* |
| * stderr has already been redirected to the error_log. |
| * rather than attempting to temporarily rehook it to the terminal, |
| * we print the prompt to stdout before EVP_read_pw_string turns |
| * off tty echo |
| */ |
| apr_file_open_stdout(&writetty, ppcb->p); |
| |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ppcb->s, APLOGNO(10147) |
| "Init: Requesting pass phrase via builtin terminal " |
| "dialog"); |
| #endif |
| } |
| |
| /* |
| * The first time display a header to inform the user about what |
| * program he actually speaks to, which module is responsible for |
| * this terminal dialog and why to the hell he has to enter |
| * something... |
| */ |
| if (ppcb->nPassPhraseDialog == 1) { |
| apr_file_printf(writetty, "%s mod_ssl (Pass Phrase Dialog)\n", |
| AP_SERVER_BASEVERSION); |
| apr_file_printf(writetty, |
| "A pass phrase is required to access the private key.\n"); |
| } |
| if (ppcb->bPassPhraseDialogOnce) { |
| ppcb->bPassPhraseDialogOnce = FALSE; |
| apr_file_printf(writetty, "\n"); |
| apr_file_printf(writetty, "Private key %s (%s)\n", |
| ppcb->key_id, ppcb->pkey_file); |
| } |
| } |
| |
| return 1; |
| } |
| |
| static int passphrase_ui_read(UI *ui, UI_STRING *uis) |
| { |
| pphrase_cb_arg_t *ppcb = UI_get0_user_data(ui); |
| SSLSrvConfigRec *sc = mySrvConfig(ppcb->s); |
| const char *prompt; |
| int i; |
| int bufsize; |
| int len; |
| char *buf; |
| |
| prompt = UI_get0_output_string(uis); |
| if (prompt == NULL) { |
| prompt = "Enter pass phrase:"; |
| } |
| |
| /* |
| * Get the maximum expected size and allocate the buffer |
| */ |
| bufsize = UI_get_result_maxsize(uis); |
| buf = apr_pcalloc(ppcb->p, bufsize); |
| |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN |
| || sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE) { |
| /* |
| * Get the pass phrase through a callback. |
| * Empty input is not accepted. |
| */ |
| for (;;) { |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE) { |
| i = pipe_get_passwd_cb(buf, bufsize, "", FALSE); |
| } |
| else { /* sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN */ |
| i = EVP_read_pw_string(buf, bufsize, "", FALSE); |
| } |
| if (i != 0) { |
| OPENSSL_cleanse(buf, bufsize); |
| return 0; |
| } |
| len = strlen(buf); |
| if (len < 1){ |
| apr_file_printf(writetty, "Apache:mod_ssl:Error: Pass phrase" |
| "empty (needs to be at least 1 character).\n"); |
| apr_file_puts(prompt, writetty); |
| } |
| else { |
| break; |
| } |
| } |
| } |
| /* |
| * Filter program |
| */ |
| else if (sc->server->pphrase_dialog_type == SSL_PPTYPE_FILTER) { |
| const char *cmd = sc->server->pphrase_dialog_path; |
| const char **argv = apr_palloc(ppcb->p, sizeof(char *) * 3); |
| char *result; |
| |
| ap_log_error(APLOG_MARK, APLOG_INFO, 0, ppcb->s, APLOGNO(10148) |
| "Init: Requesting pass phrase from dialog filter " |
| "program (%s)", cmd); |
| |
| argv[0] = cmd; |
| argv[1] = ppcb->key_id; |
| argv[2] = NULL; |
| |
| result = ssl_util_readfilter(ppcb->s, ppcb->p, cmd, argv); |
| apr_cpystrn(buf, result, bufsize); |
| } |
| |
| /* |
| * Ok, we now have the pass phrase, so give it back |
| */ |
| ppcb->cpPassPhraseCur = apr_pstrdup(ppcb->p, buf); |
| UI_set_result(ui, uis, buf); |
| |
| /* Clear sensitive data. */ |
| OPENSSL_cleanse(buf, bufsize); |
| return 1; |
| } |
| |
| static int passphrase_ui_write(UI *ui, UI_STRING *uis) |
| { |
| pphrase_cb_arg_t *ppcb = UI_get0_user_data(ui); |
| SSLSrvConfigRec *sc; |
| const char *prompt; |
| |
| sc = mySrvConfig(ppcb->s); |
| |
| if (sc->server->pphrase_dialog_type == SSL_PPTYPE_BUILTIN |
| || sc->server->pphrase_dialog_type == SSL_PPTYPE_PIPE) { |
| prompt = UI_get0_output_string(uis); |
| apr_file_puts(prompt, writetty); |
| } |
| |
| return 1; |
| } |
| |
| static int passphrase_ui_close(UI *ui) |
| { |
| /* |
| * Close the pipes if they were opened |
| */ |
| if (readtty) { |
| apr_file_close(readtty); |
| apr_file_close(writetty); |
| readtty = writetty = NULL; |
| } |
| return 1; |
| } |
| |
| static apr_status_t pp_ui_method_cleanup(void *uip) |
| { |
| UI_METHOD *uim = uip; |
| |
| UI_destroy_method(uim); |
| |
| return APR_SUCCESS; |
| } |
| |
| static UI_METHOD *get_passphrase_ui(apr_pool_t *p) |
| { |
| UI_METHOD *ui_method = UI_create_method("Passphrase UI"); |
| |
| UI_method_set_opener(ui_method, passphrase_ui_open); |
| UI_method_set_reader(ui_method, passphrase_ui_read); |
| UI_method_set_writer(ui_method, passphrase_ui_write); |
| UI_method_set_closer(ui_method, passphrase_ui_close); |
| |
| apr_pool_cleanup_register(p, ui_method, pp_ui_method_cleanup, |
| pp_ui_method_cleanup); |
| |
| return ui_method; |
| } |
| #endif |
| |
| |
| apr_status_t modssl_load_engine_keypair(server_rec *s, apr_pool_t *p, |
| const char *vhostid, |
| const char *certid, const char *keyid, |
| X509 **pubkey, EVP_PKEY **privkey) |
| { |
| #if defined(HAVE_OPENSSL_ENGINE_H) && defined(HAVE_ENGINE_INIT) |
| const char *c, *scheme; |
| ENGINE *e; |
| UI_METHOD *ui_method = get_passphrase_ui(p); |
| pphrase_cb_arg_t ppcb; |
| |
| memset(&ppcb, 0, sizeof ppcb); |
| ppcb.s = s; |
| ppcb.p = p; |
| ppcb.bPassPhraseDialogOnce = TRUE; |
| ppcb.key_id = vhostid; |
| ppcb.pkey_file = keyid; |
| |
| c = ap_strchr_c(keyid, ':'); |
| if (!c || c == keyid) { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, 0, s, APLOGNO(10131) |
| "Init: Unrecognized private key identifier `%s'", |
| keyid); |
| return ssl_die(s); |
| } |
| |
| scheme = apr_pstrmemdup(p, keyid, c - keyid); |
| if (!(e = ENGINE_by_id(scheme))) { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, 0, s, APLOGNO(10132) |
| "Init: Failed to load engine for private key %s", |
| keyid); |
| ssl_log_ssl_error(SSLLOG_MARK, APLOG_EMERG, s); |
| return ssl_die(s); |
| } |
| |
| if (!ENGINE_init(e)) { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, 0, s, APLOGNO(10149) |
| "Init: Failed to initialize engine %s for private key %s", |
| scheme, keyid); |
| ssl_log_ssl_error(SSLLOG_MARK, APLOG_EMERG, s); |
| return ssl_die(s); |
| } |
| |
| ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, s, |
| "Init: Initialized engine %s for private key %s", |
| scheme, keyid); |
| |
| if (APLOGdebug(s)) { |
| ENGINE_ctrl_cmd_string(e, "VERBOSE", NULL, 0); |
| } |
| |
| if (certid) { |
| struct { |
| const char *cert_id; |
| X509 *cert; |
| } params = { certid, NULL }; |
| |
| if (!ENGINE_ctrl_cmd(e, "LOAD_CERT_CTRL", 0, ¶ms, NULL, 1)) { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, 0, s, APLOGNO(10136) |
| "Init: Unable to get the certificate"); |
| ssl_log_ssl_error(SSLLOG_MARK, APLOG_EMERG, s); |
| return ssl_die(s); |
| } |
| |
| *pubkey = params.cert; |
| } |
| |
| *privkey = ENGINE_load_private_key(e, keyid, ui_method, &ppcb); |
| if (*privkey == NULL) { |
| ap_log_error(APLOG_MARK, APLOG_EMERG, 0, s, APLOGNO(10133) |
| "Init: Unable to get the private key"); |
| ssl_log_ssl_error(SSLLOG_MARK, APLOG_EMERG, s); |
| return ssl_die(s); |
| } |
| |
| ENGINE_finish(e); |
| ENGINE_free(e); |
| |
| return APR_SUCCESS; |
| #else |
| return APR_ENOTIMPL; |
| #endif |
| } |
