| /* Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* Status Module. Display lots of internal data about how Apache is |
| * performing and the state of all children processes. |
| * |
| * To enable this, add the following lines into any config file: |
| * |
| * <Location /server-status> |
| * SetHandler server-status |
| * </Location> |
| * |
| * You may want to protect this location by password or domain so no one |
| * else can look at it. Then you can access the statistics with a URL like: |
| * |
| * http://your_server_name/server-status |
| * |
| * /server-status - Returns page using tables |
| * /server-status?notable - Returns page for browsers without table support |
| * /server-status?refresh - Returns page with 1 second refresh |
| * /server-status?refresh=6 - Returns page with refresh every 6 seconds |
| * /server-status?auto - Returns page with data for automatic parsing |
| * |
| * Mark Cox, mark@ukweb.com, November 1995 |
| * |
| * 12.11.95 Initial version for www.telescope.org |
| * 13.3.96 Updated to remove rprintf's [Mark] |
| * 18.3.96 Added CPU usage, process information, and tidied [Ben Laurie] |
| * 18.3.96 Make extra Scoreboard variables #definable |
| * 25.3.96 Make short report have full precision [Ben Laurie suggested] |
| * 25.3.96 Show uptime better [Mark/Ben Laurie] |
| * 29.3.96 Better HTML and explanation [Mark/Rob Hartill suggested] |
| * 09.4.96 Added message for non-STATUS compiled version |
| * 18.4.96 Added per child and per slot counters [Jim Jagielski] |
| * 01.5.96 Table format, cleanup, even more spiffy data [Chuck Murcko/Jim J.] |
| * 18.5.96 Adapted to use new rprintf() routine, incidentally fixing a missing |
| * piece in short reports [Ben Laurie] |
| * 21.5.96 Additional Status codes (DNS and LOGGING only enabled if |
| * extended STATUS is enabled) [George Burgyan/Jim J.] |
| * 10.8.98 Allow for extended status info at runtime (no more STATUS) |
| * [Jim J.] |
| */ |
| |
| #include "httpd.h" |
| #include "http_config.h" |
| #include "http_core.h" |
| #include "http_protocol.h" |
| #include "http_main.h" |
| #include "ap_mpm.h" |
| #include "util_script.h" |
| #include <time.h> |
| #include "scoreboard.h" |
| #include "http_log.h" |
| #include "mod_status.h" |
| #if APR_HAVE_UNISTD_H |
| #include <unistd.h> |
| #endif |
| #define APR_WANT_STRFUNC |
| #include "apr_want.h" |
| #include "apr_strings.h" |
| |
| #define STATUS_MAXLINE 64 |
| |
| #define KBYTE 1024 |
| #define MBYTE 1048576L |
| #define GBYTE 1073741824L |
| |
| #ifndef DEFAULT_TIME_FORMAT |
| #define DEFAULT_TIME_FORMAT "%A, %d-%b-%Y %H:%M:%S %Z" |
| #endif |
| |
| #define STATUS_MAGIC_TYPE "application/x-httpd-status" |
| |
| module AP_MODULE_DECLARE_DATA status_module; |
| |
| static int server_limit, thread_limit, threads_per_child, max_servers, |
| is_async; |
| |
| /* Implement 'ap_run_status_hook'. */ |
| APR_IMPLEMENT_OPTIONAL_HOOK_RUN_ALL(ap, STATUS, int, status_hook, |
| (request_rec *r, int flags), |
| (r, flags), |
| OK, DECLINED) |
| |
| #ifdef HAVE_TIMES |
| /* ugh... need to know if we're running with a pthread implementation |
| * such as linuxthreads that treats individual threads as distinct |
| * processes; that affects how we add up CPU time in a process |
| */ |
| static pid_t child_pid; |
| #endif |
| |
| /* Format the number of bytes nicely */ |
| static void format_byte_out(request_rec *r, apr_off_t bytes) |
| { |
| if (bytes < (5 * KBYTE)) |
| ap_rprintf(r, "%d B", (int) bytes); |
| else if (bytes < (MBYTE / 2)) |
| ap_rprintf(r, "%.1f kB", (float) bytes / KBYTE); |
| else if (bytes < (GBYTE / 2)) |
| ap_rprintf(r, "%.1f MB", (float) bytes / MBYTE); |
| else |
| ap_rprintf(r, "%.1f GB", (float) bytes / GBYTE); |
| } |
| |
| static void format_kbyte_out(request_rec *r, apr_off_t kbytes) |
| { |
| if (kbytes < KBYTE) |
| ap_rprintf(r, "%d kB", (int) kbytes); |
| else if (kbytes < MBYTE) |
| ap_rprintf(r, "%.1f MB", (float) kbytes / KBYTE); |
| else |
| ap_rprintf(r, "%.1f GB", (float) kbytes / MBYTE); |
| } |
| |
| static void show_time(request_rec *r, apr_uint32_t tsecs) |
| { |
| int days, hrs, mins, secs; |
| |
| secs = (int)(tsecs % 60); |
| tsecs /= 60; |
| mins = (int)(tsecs % 60); |
| tsecs /= 60; |
| hrs = (int)(tsecs % 24); |
| days = (int)(tsecs / 24); |
| |
| if (days) |
| ap_rprintf(r, " %d day%s", days, days == 1 ? "" : "s"); |
| |
| if (hrs) |
| ap_rprintf(r, " %d hour%s", hrs, hrs == 1 ? "" : "s"); |
| |
| if (mins) |
| ap_rprintf(r, " %d minute%s", mins, mins == 1 ? "" : "s"); |
| |
| if (secs) |
| ap_rprintf(r, " %d second%s", secs, secs == 1 ? "" : "s"); |
| } |
| |
| /* Main handler for x-httpd-status requests */ |
| |
| /* ID values for command table */ |
| |
| #define STAT_OPT_END -1 |
| #define STAT_OPT_REFRESH 0 |
| #define STAT_OPT_NOTABLE 1 |
| #define STAT_OPT_AUTO 2 |
| |
| struct stat_opt { |
| int id; |
| const char *form_data_str; |
| const char *hdr_out_str; |
| }; |
| |
| static const struct stat_opt status_options[] = /* see #defines above */ |
| { |
| {STAT_OPT_REFRESH, "refresh", "Refresh"}, |
| {STAT_OPT_NOTABLE, "notable", NULL}, |
| {STAT_OPT_AUTO, "auto", NULL}, |
| {STAT_OPT_END, NULL, NULL} |
| }; |
| |
| /* add another state for slots above the MaxRequestWorkers setting */ |
| #define SERVER_DISABLED SERVER_NUM_STATUS |
| #define MOD_STATUS_NUM_STATUS (SERVER_NUM_STATUS+1) |
| |
| static char status_flags[MOD_STATUS_NUM_STATUS]; |
| |
| static int status_handler(request_rec *r) |
| { |
| const char *loc; |
| apr_time_t nowtime; |
| apr_uint32_t up_time; |
| ap_loadavg_t t; |
| int j, i, res, written; |
| int ready; |
| int busy; |
| unsigned long count; |
| unsigned long lres, my_lres, conn_lres; |
| apr_off_t bytes, my_bytes, conn_bytes; |
| apr_off_t bcount, kbcount; |
| long req_time; |
| apr_time_t duration_global; |
| apr_time_t duration_slot; |
| int short_report; |
| int no_table_report; |
| global_score *global_record; |
| worker_score *ws_record; |
| process_score *ps_record; |
| char *stat_buffer; |
| pid_t *pid_buffer, worker_pid; |
| int *thread_idle_buffer = NULL; |
| int *thread_busy_buffer = NULL; |
| clock_t tu, ts, tcu, tcs; |
| clock_t gu, gs, gcu, gcs; |
| ap_generation_t mpm_generation, worker_generation; |
| #ifdef HAVE_TIMES |
| float tick; |
| int times_per_thread; |
| #endif |
| |
| if (strcmp(r->handler, STATUS_MAGIC_TYPE) && strcmp(r->handler, |
| "server-status")) { |
| return DECLINED; |
| } |
| |
| #ifdef HAVE_TIMES |
| times_per_thread = getpid() != child_pid; |
| #endif |
| |
| ap_mpm_query(AP_MPMQ_GENERATION, &mpm_generation); |
| |
| #ifdef HAVE_TIMES |
| #ifdef _SC_CLK_TCK |
| tick = sysconf(_SC_CLK_TCK); |
| #else |
| tick = HZ; |
| #endif |
| #endif |
| |
| ready = 0; |
| busy = 0; |
| count = 0; |
| bcount = 0; |
| kbcount = 0; |
| duration_global = 0; |
| short_report = 0; |
| no_table_report = 0; |
| |
| if (!ap_exists_scoreboard_image()) { |
| ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(01237) |
| "Server status unavailable in inetd mode"); |
| return HTTP_INTERNAL_SERVER_ERROR; |
| } |
| |
| pid_buffer = apr_palloc(r->pool, server_limit * sizeof(pid_t)); |
| stat_buffer = apr_palloc(r->pool, server_limit * thread_limit * sizeof(char)); |
| if (is_async) { |
| thread_idle_buffer = apr_palloc(r->pool, server_limit * sizeof(int)); |
| thread_busy_buffer = apr_palloc(r->pool, server_limit * sizeof(int)); |
| } |
| |
| nowtime = apr_time_now(); |
| #ifdef HAVE_TIMES |
| global_record = ap_get_scoreboard_global(); |
| gu = global_record->times.tms_utime; |
| gs = global_record->times.tms_stime; |
| gcu = global_record->times.tms_cutime; |
| gcs = global_record->times.tms_cstime; |
| #else |
| gu = gs = gcu = gcs = 0; |
| #endif |
| tu = ts = tcu = tcs = 0; |
| |
| r->allowed = (AP_METHOD_BIT << M_GET); |
| if (r->method_number != M_GET) |
| return DECLINED; |
| |
| ap_set_content_type(r, "text/html; charset=ISO-8859-1"); |
| |
| /* |
| * Simple table-driven form data set parser that lets you alter the header |
| */ |
| |
| if (r->args) { |
| i = 0; |
| while (status_options[i].id != STAT_OPT_END) { |
| if ((loc = ap_strstr_c(r->args, |
| status_options[i].form_data_str)) != NULL) { |
| switch (status_options[i].id) { |
| case STAT_OPT_REFRESH: { |
| apr_size_t len = strlen(status_options[i].form_data_str); |
| long t = 0; |
| |
| if (*(loc + len ) == '=') { |
| t = atol(loc + len + 1); |
| } |
| apr_table_setn(r->headers_out, |
| status_options[i].hdr_out_str, |
| apr_ltoa(r->pool, t < 1 ? 10 : t)); |
| break; |
| } |
| case STAT_OPT_NOTABLE: |
| no_table_report = 1; |
| break; |
| case STAT_OPT_AUTO: |
| ap_set_content_type(r, "text/plain; charset=ISO-8859-1"); |
| short_report = 1; |
| break; |
| } |
| } |
| |
| i++; |
| } |
| } |
| |
| ws_record = apr_palloc(r->pool, sizeof *ws_record); |
| |
| for (i = 0; i < server_limit; ++i) { |
| #ifdef HAVE_TIMES |
| clock_t proc_tu = 0, proc_ts = 0, proc_tcu = 0, proc_tcs = 0; |
| clock_t tmp_tu, tmp_ts, tmp_tcu, tmp_tcs; |
| #endif |
| |
| ps_record = ap_get_scoreboard_process(i); |
| if (is_async) { |
| thread_idle_buffer[i] = 0; |
| thread_busy_buffer[i] = 0; |
| } |
| for (j = 0; j < thread_limit; ++j) { |
| int indx = (i * thread_limit) + j; |
| |
| ap_copy_scoreboard_worker(ws_record, i, j); |
| res = ws_record->status; |
| |
| if ((i >= max_servers || j >= threads_per_child) |
| && (res == SERVER_DEAD)) |
| stat_buffer[indx] = status_flags[SERVER_DISABLED]; |
| else |
| stat_buffer[indx] = status_flags[res]; |
| |
| if (!ps_record->quiescing |
| && ps_record->pid) { |
| if (res == SERVER_READY) { |
| if (ps_record->generation == mpm_generation) |
| ready++; |
| if (is_async) |
| thread_idle_buffer[i]++; |
| } |
| else if (res != SERVER_DEAD && |
| res != SERVER_STARTING && |
| res != SERVER_IDLE_KILL) { |
| busy++; |
| if (is_async) { |
| if (res == SERVER_GRACEFUL) |
| thread_idle_buffer[i]++; |
| else |
| thread_busy_buffer[i]++; |
| } |
| } |
| } |
| |
| /* XXX what about the counters for quiescing/seg faulted |
| * processes? should they be counted or not? GLA |
| */ |
| if (ap_extended_status) { |
| lres = ws_record->access_count; |
| bytes = ws_record->bytes_served; |
| |
| if (lres != 0 || (res != SERVER_READY && res != SERVER_DEAD)) { |
| #ifdef HAVE_TIMES |
| tmp_tu = ws_record->times.tms_utime; |
| tmp_ts = ws_record->times.tms_stime; |
| tmp_tcu = ws_record->times.tms_cutime; |
| tmp_tcs = ws_record->times.tms_cstime; |
| |
| if (times_per_thread) { |
| proc_tu += tmp_tu; |
| proc_ts += tmp_ts; |
| proc_tcu += tmp_tcu; |
| proc_tcs += tmp_tcs; |
| } |
| else { |
| if (tmp_tu > proc_tu || |
| tmp_ts > proc_ts || |
| tmp_tcu > proc_tcu || |
| tmp_tcs > proc_tcs) { |
| proc_tu = tmp_tu; |
| proc_ts = tmp_ts; |
| proc_tcu = tmp_tcu; |
| proc_tcs = tmp_tcs; |
| } |
| } |
| #endif /* HAVE_TIMES */ |
| |
| count += lres; |
| bcount += bytes; |
| duration_global += ws_record->duration; |
| |
| if (bcount >= KBYTE) { |
| kbcount += (bcount >> 10); |
| bcount = bcount & 0x3ff; |
| } |
| } |
| } |
| } |
| #ifdef HAVE_TIMES |
| tu += proc_tu; |
| ts += proc_ts; |
| tcu += proc_tcu; |
| tcs += proc_tcs; |
| #endif |
| pid_buffer[i] = ps_record->pid; |
| } |
| |
| /* up_time in seconds */ |
| up_time = (apr_uint32_t) apr_time_sec(nowtime - |
| ap_scoreboard_image->global->restart_time); |
| ap_get_loadavg(&t); |
| |
| if (!short_report) { |
| ap_rputs(DOCTYPE_HTML_4_01 |
| "<html><head>\n" |
| "<title>Apache Status</title>\n" |
| "</head><body>\n" |
| "<h1>Apache Server Status for ", r); |
| ap_rvputs(r, ap_escape_html(r->pool, ap_get_server_name(r)), |
| " (via ", r->connection->local_ip, |
| ")</h1>\n\n", NULL); |
| ap_rvputs(r, "<dl><dt>Server Version: ", |
| ap_get_server_description(), "</dt>\n", NULL); |
| ap_rvputs(r, "<dt>Server MPM: ", |
| ap_show_mpm(), "</dt>\n", NULL); |
| ap_rvputs(r, "<dt>Server Built: ", |
| ap_get_server_built(), "\n</dt></dl><hr /><dl>\n", NULL); |
| ap_rvputs(r, "<dt>Current Time: ", |
| ap_ht_time(r->pool, nowtime, DEFAULT_TIME_FORMAT, 0), |
| "</dt>\n", NULL); |
| ap_rvputs(r, "<dt>Restart Time: ", |
| ap_ht_time(r->pool, |
| ap_scoreboard_image->global->restart_time, |
| DEFAULT_TIME_FORMAT, 0), |
| "</dt>\n", NULL); |
| ap_rprintf(r, "<dt>Parent Server Config. Generation: %d</dt>\n", |
| ap_state_query(AP_SQ_CONFIG_GEN)); |
| ap_rprintf(r, "<dt>Parent Server MPM Generation: %d</dt>\n", |
| (int)mpm_generation); |
| ap_rputs("<dt>Server uptime: ", r); |
| show_time(r, up_time); |
| ap_rputs("</dt>\n", r); |
| ap_rprintf(r, "<dt>Server load: %.2f %.2f %.2f</dt>\n", |
| t.loadavg, t.loadavg5, t.loadavg15); |
| } |
| else { |
| ap_rvputs(r, ap_get_server_name(r), "\n", NULL); |
| ap_rvputs(r, "ServerVersion: ", |
| ap_get_server_description(), "\n", NULL); |
| ap_rvputs(r, "ServerMPM: ", |
| ap_show_mpm(), "\n", NULL); |
| ap_rvputs(r, "Server Built: ", |
| ap_get_server_built(), "\n", NULL); |
| ap_rvputs(r, "CurrentTime: ", |
| ap_ht_time(r->pool, nowtime, DEFAULT_TIME_FORMAT, 0), |
| "\n", NULL); |
| ap_rvputs(r, "RestartTime: ", |
| ap_ht_time(r->pool, |
| ap_scoreboard_image->global->restart_time, |
| DEFAULT_TIME_FORMAT, 0), |
| "\n", NULL); |
| ap_rprintf(r, "ParentServerConfigGeneration: %d\n", |
| ap_state_query(AP_SQ_CONFIG_GEN)); |
| ap_rprintf(r, "ParentServerMPMGeneration: %d\n", |
| (int)mpm_generation); |
| ap_rprintf(r, "ServerUptimeSeconds: %u\n", |
| up_time); |
| ap_rputs("ServerUptime:", r); |
| show_time(r, up_time); |
| ap_rputs("\n", r); |
| ap_rprintf(r, "Load1: %.2f\nLoad5: %.2f\nLoad15: %.2f\n", |
| t.loadavg, t.loadavg5, t.loadavg15); |
| } |
| |
| if (ap_extended_status) { |
| clock_t cpu = gu + gs + gcu + gcs + tu + ts + tcu + tcs; |
| if (short_report) { |
| ap_rprintf(r, "Total Accesses: %lu\nTotal kBytes: %" |
| APR_OFF_T_FMT "\nTotal Duration: %" |
| APR_TIME_T_FMT "\n", |
| count, kbcount, apr_time_as_msec(duration_global)); |
| |
| #ifdef HAVE_TIMES |
| /* Allow for OS/2 not having CPU stats */ |
| ap_rprintf(r, "CPUUser: %g\nCPUSystem: %g\nCPUChildrenUser: %g\nCPUChildrenSystem: %g\n", |
| (gu + tu) / tick, (gs + ts) / tick, (gcu + tcu) / tick, (gcs + tcs) / tick); |
| |
| if (cpu) |
| ap_rprintf(r, "CPULoad: %g\n", |
| cpu / tick / up_time * 100.); |
| #endif |
| |
| ap_rprintf(r, "Uptime: %ld\n", (long) (up_time)); |
| if (up_time > 0) { |
| ap_rprintf(r, "ReqPerSec: %g\n", |
| (float) count / (float) up_time); |
| |
| ap_rprintf(r, "BytesPerSec: %g\n", |
| KBYTE * (float) kbcount / (float) up_time); |
| } |
| if (count > 0) { |
| ap_rprintf(r, "BytesPerReq: %g\n", |
| KBYTE * (float) kbcount / (float) count); |
| ap_rprintf(r, "DurationPerReq: %g\n", |
| (float) apr_time_as_msec(duration_global) / (float) count); |
| } |
| } |
| else { /* !short_report */ |
| ap_rprintf(r, "<dt>Total accesses: %lu - Total Traffic: ", count); |
| format_kbyte_out(r, kbcount); |
| ap_rprintf(r, " - Total Duration: %" APR_TIME_T_FMT "</dt>\n", |
| apr_time_as_msec(duration_global)); |
| |
| #ifdef HAVE_TIMES |
| /* Allow for OS/2 not having CPU stats */ |
| ap_rprintf(r, "<dt>CPU Usage: u%g s%g cu%g cs%g", |
| (gu + tu) / tick, (gs + ts) / tick, (gcu + tcu) / tick, (gcs + tcs) / tick); |
| |
| if (cpu) |
| ap_rprintf(r, " - %.3g%% CPU load</dt>\n", |
| cpu / tick / up_time * 100.); |
| else |
| ap_rputs("</dt>\n", r); |
| #endif |
| |
| ap_rputs("<dt>", r); |
| if (up_time > 0) { |
| ap_rprintf(r, "%.3g requests/sec - ", |
| (float) count / (float) up_time); |
| |
| format_byte_out(r, (unsigned long)(KBYTE * (float) kbcount |
| / (float) up_time)); |
| ap_rputs("/second", r); |
| } |
| |
| if (count > 0) { |
| if (up_time > 0) |
| ap_rputs(" - ", r); |
| format_byte_out(r, (unsigned long)(KBYTE * (float) kbcount |
| / (float) count)); |
| ap_rprintf(r, "/request - %g ms/request", |
| (float) apr_time_as_msec(duration_global) / (float) count); |
| } |
| |
| ap_rputs("</dt>\n", r); |
| } /* short_report */ |
| } /* ap_extended_status */ |
| |
| if (!short_report) |
| ap_rprintf(r, "<dt>%d requests currently being processed, " |
| "%d idle workers</dt>\n", busy, ready); |
| else |
| ap_rprintf(r, "BusyWorkers: %d\nIdleWorkers: %d\n", busy, ready); |
| |
| if (!short_report) |
| ap_rputs("</dl>", r); |
| |
| if (is_async) { |
| int write_completion = 0, lingering_close = 0, keep_alive = 0, |
| connections = 0, stopping = 0, procs = 0; |
| /* |
| * These differ from 'busy' and 'ready' in how gracefully finishing |
| * threads are counted. XXX: How to make this clear in the html? |
| */ |
| int busy_workers = 0, idle_workers = 0; |
| if (!short_report) |
| ap_rputs("\n\n<table rules=\"all\" cellpadding=\"1%\">\n" |
| "<tr><th rowspan=\"2\">Slot</th>" |
| "<th rowspan=\"2\">PID</th>" |
| "<th rowspan=\"2\">Stopping</th>" |
| "<th colspan=\"2\">Connections</th>\n" |
| "<th colspan=\"2\">Threads</th>" |
| "<th colspan=\"3\">Async connections</th></tr>\n" |
| "<tr><th>total</th><th>accepting</th>" |
| "<th>busy</th><th>idle</th>" |
| "<th>writing</th><th>keep-alive</th><th>closing</th></tr>\n", r); |
| for (i = 0; i < server_limit; ++i) { |
| ps_record = ap_get_scoreboard_process(i); |
| if (ps_record->pid) { |
| connections += ps_record->connections; |
| write_completion += ps_record->write_completion; |
| keep_alive += ps_record->keep_alive; |
| lingering_close += ps_record->lingering_close; |
| busy_workers += thread_busy_buffer[i]; |
| idle_workers += thread_idle_buffer[i]; |
| procs++; |
| if (ps_record->quiescing) { |
| stopping++; |
| } |
| if (!short_report) { |
| const char *dying = "no"; |
| const char *old = ""; |
| if (ps_record->quiescing) { |
| dying = "yes"; |
| } |
| if (ps_record->generation != mpm_generation) |
| old = " (old gen)"; |
| ap_rprintf(r, "<tr><td>%u</td><td>%" APR_PID_T_FMT "</td>" |
| "<td>%s%s</td>" |
| "<td>%u</td><td>%s</td>" |
| "<td>%u</td><td>%u</td>" |
| "<td>%u</td><td>%u</td><td>%u</td>" |
| "</tr>\n", |
| i, ps_record->pid, |
| dying, old, |
| ps_record->connections, |
| ps_record->not_accepting ? "no" : "yes", |
| thread_busy_buffer[i], |
| thread_idle_buffer[i], |
| ps_record->write_completion, |
| ps_record->keep_alive, |
| ps_record->lingering_close); |
| } |
| } |
| } |
| if (!short_report) { |
| ap_rprintf(r, "<tr><td>Sum</td>" |
| "<td>%d</td><td>%d</td>" |
| "<td>%d</td><td> </td>" |
| "<td>%d</td><td>%d</td>" |
| "<td>%d</td><td>%d</td><td>%d</td>" |
| "</tr>\n</table>\n", |
| procs, stopping, |
| connections, |
| busy_workers, idle_workers, |
| write_completion, keep_alive, lingering_close); |
| } |
| else { |
| ap_rprintf(r, "Processes: %d\n" |
| "Stopping: %d\n" |
| "BusyWorkers: %d\n" |
| "IdleWorkers: %d\n" |
| "ConnsTotal: %d\n" |
| "ConnsAsyncWriting: %d\n" |
| "ConnsAsyncKeepAlive: %d\n" |
| "ConnsAsyncClosing: %d\n", |
| procs, stopping, |
| busy_workers, idle_workers, |
| connections, |
| write_completion, keep_alive, lingering_close); |
| } |
| } |
| |
| /* send the scoreboard 'table' out */ |
| if (!short_report) |
| ap_rputs("<pre>", r); |
| else |
| ap_rputs("Scoreboard: ", r); |
| |
| written = 0; |
| for (i = 0; i < server_limit; ++i) { |
| for (j = 0; j < thread_limit; ++j) { |
| int indx = (i * thread_limit) + j; |
| if (stat_buffer[indx] != status_flags[SERVER_DISABLED]) { |
| ap_rputc(stat_buffer[indx], r); |
| if ((written % STATUS_MAXLINE == (STATUS_MAXLINE - 1)) |
| && !short_report) |
| ap_rputs("\n", r); |
| written++; |
| } |
| } |
| } |
| |
| |
| if (short_report) |
| ap_rputs("\n", r); |
| else { |
| ap_rputs("</pre>\n" |
| "<p>Scoreboard Key:<br />\n" |
| "\"<b><code>_</code></b>\" Waiting for Connection, \n" |
| "\"<b><code>S</code></b>\" Starting up, \n" |
| "\"<b><code>R</code></b>\" Reading Request,<br />\n" |
| "\"<b><code>W</code></b>\" Sending Reply, \n" |
| "\"<b><code>K</code></b>\" Keepalive (read), \n" |
| "\"<b><code>D</code></b>\" DNS Lookup,<br />\n" |
| "\"<b><code>C</code></b>\" Closing connection, \n" |
| "\"<b><code>L</code></b>\" Logging, \n" |
| "\"<b><code>G</code></b>\" Gracefully finishing,<br /> \n" |
| "\"<b><code>I</code></b>\" Idle cleanup of worker, \n" |
| "\"<b><code>.</code></b>\" Open slot with no current process<br />\n" |
| "</p>\n", r); |
| if (!ap_extended_status) { |
| int j; |
| int k = 0; |
| ap_rputs("PID Key: <br />\n" |
| "<pre>\n", r); |
| for (i = 0; i < server_limit; ++i) { |
| for (j = 0; j < thread_limit; ++j) { |
| int indx = (i * thread_limit) + j; |
| |
| if (stat_buffer[indx] != '.') { |
| ap_rprintf(r, " %" APR_PID_T_FMT |
| " in state: %c ", pid_buffer[i], |
| stat_buffer[indx]); |
| |
| if (++k >= 3) { |
| ap_rputs("\n", r); |
| k = 0; |
| } else |
| ap_rputs(",", r); |
| } |
| } |
| } |
| |
| ap_rputs("\n" |
| "</pre>\n", r); |
| } |
| } |
| |
| if (ap_extended_status && !short_report) { |
| if (no_table_report) |
| ap_rputs("<hr /><h2>Server Details</h2>\n\n", r); |
| else |
| ap_rputs("\n\n<table border=\"0\"><tr>" |
| "<th>Srv</th><th>PID</th><th>Acc</th>" |
| "<th>M</th>" |
| #ifdef HAVE_TIMES |
| "<th>CPU\n</th>" |
| #endif |
| "<th>SS</th><th>Req</th><th>Dur</th>" |
| "<th>Conn</th><th>Child</th><th>Slot</th>" |
| "<th>Client</th><th>Protocol</th><th>VHost</th>" |
| "<th>Request</th></tr>\n\n", r); |
| |
| for (i = 0; i < server_limit; ++i) { |
| for (j = 0; j < thread_limit; ++j) { |
| ap_copy_scoreboard_worker(ws_record, i, j); |
| |
| if (ws_record->access_count == 0 && |
| (ws_record->status == SERVER_READY || |
| ws_record->status == SERVER_DEAD)) { |
| continue; |
| } |
| |
| ps_record = ap_get_scoreboard_process(i); |
| |
| if (ws_record->start_time == 0L) |
| req_time = 0L; |
| else |
| req_time = (long) |
| apr_time_as_msec(ws_record->stop_time - |
| ws_record->start_time); |
| if (req_time < 0L) |
| req_time = 0L; |
| |
| lres = ws_record->access_count; |
| my_lres = ws_record->my_access_count; |
| conn_lres = ws_record->conn_count; |
| bytes = ws_record->bytes_served; |
| my_bytes = ws_record->my_bytes_served; |
| conn_bytes = ws_record->conn_bytes; |
| duration_slot = ws_record->duration; |
| if (ws_record->pid) { /* MPM sets per-worker pid and generation */ |
| worker_pid = ws_record->pid; |
| worker_generation = ws_record->generation; |
| } |
| else { |
| worker_pid = ps_record->pid; |
| worker_generation = ps_record->generation; |
| } |
| |
| if (no_table_report) { |
| if (ws_record->status == SERVER_DEAD) |
| ap_rprintf(r, |
| "<b>Server %d-%d</b> (-): %d|%lu|%lu [", |
| i, (int)worker_generation, |
| (int)conn_lres, my_lres, lres); |
| else |
| ap_rprintf(r, |
| "<b>Server %d-%d</b> (%" |
| APR_PID_T_FMT "): %d|%lu|%lu [", |
| i, (int) worker_generation, |
| worker_pid, |
| (int)conn_lres, my_lres, lres); |
| |
| switch (ws_record->status) { |
| case SERVER_READY: |
| ap_rputs("Ready", r); |
| break; |
| case SERVER_STARTING: |
| ap_rputs("Starting", r); |
| break; |
| case SERVER_BUSY_READ: |
| ap_rputs("<b>Read</b>", r); |
| break; |
| case SERVER_BUSY_WRITE: |
| ap_rputs("<b>Write</b>", r); |
| break; |
| case SERVER_BUSY_KEEPALIVE: |
| ap_rputs("<b>Keepalive</b>", r); |
| break; |
| case SERVER_BUSY_LOG: |
| ap_rputs("<b>Logging</b>", r); |
| break; |
| case SERVER_BUSY_DNS: |
| ap_rputs("<b>DNS lookup</b>", r); |
| break; |
| case SERVER_CLOSING: |
| ap_rputs("<b>Closing</b>", r); |
| break; |
| case SERVER_DEAD: |
| ap_rputs("Dead", r); |
| break; |
| case SERVER_GRACEFUL: |
| ap_rputs("Graceful", r); |
| break; |
| case SERVER_IDLE_KILL: |
| ap_rputs("Dying", r); |
| break; |
| default: |
| ap_rputs("?STATE?", r); |
| break; |
| } |
| |
| ap_rprintf(r, "] " |
| #ifdef HAVE_TIMES |
| "u%g s%g cu%g cs%g" |
| #endif |
| "\n %ld %ld %" APR_TIME_T_FMT "(", |
| #ifdef HAVE_TIMES |
| ws_record->times.tms_utime / tick, |
| ws_record->times.tms_stime / tick, |
| ws_record->times.tms_cutime / tick, |
| ws_record->times.tms_cstime / tick, |
| #endif |
| (long)apr_time_sec(nowtime - |
| ws_record->last_used), |
| (long) req_time, apr_time_as_msec(duration_slot)); |
| |
| format_byte_out(r, conn_bytes); |
| ap_rputs("|", r); |
| format_byte_out(r, my_bytes); |
| ap_rputs("|", r); |
| format_byte_out(r, bytes); |
| ap_rputs(")\n", r); |
| ap_rprintf(r, |
| " <i>%s {%s}</i> <i>(%s)</i> <b>[%s]</b><br />\n\n", |
| ap_escape_html(r->pool, |
| ws_record->client64), |
| ap_escape_html(r->pool, |
| ap_escape_logitem(r->pool, |
| ws_record->request)), |
| ap_escape_html(r->pool, |
| ws_record->protocol), |
| ap_escape_html(r->pool, |
| ws_record->vhost)); |
| } |
| else { /* !no_table_report */ |
| if (ws_record->status == SERVER_DEAD) |
| ap_rprintf(r, |
| "<tr><td><b>%d-%d</b></td><td>-</td><td>%d/%lu/%lu", |
| i, (int)worker_generation, |
| (int)conn_lres, my_lres, lres); |
| else |
| ap_rprintf(r, |
| "<tr><td><b>%d-%d</b></td><td>%" |
| APR_PID_T_FMT |
| "</td><td>%d/%lu/%lu", |
| i, (int)worker_generation, |
| worker_pid, |
| (int)conn_lres, |
| my_lres, lres); |
| |
| switch (ws_record->status) { |
| case SERVER_READY: |
| ap_rputs("</td><td>_", r); |
| break; |
| case SERVER_STARTING: |
| ap_rputs("</td><td><b>S</b>", r); |
| break; |
| case SERVER_BUSY_READ: |
| ap_rputs("</td><td><b>R</b>", r); |
| break; |
| case SERVER_BUSY_WRITE: |
| ap_rputs("</td><td><b>W</b>", r); |
| break; |
| case SERVER_BUSY_KEEPALIVE: |
| ap_rputs("</td><td><b>K</b>", r); |
| break; |
| case SERVER_BUSY_LOG: |
| ap_rputs("</td><td><b>L</b>", r); |
| break; |
| case SERVER_BUSY_DNS: |
| ap_rputs("</td><td><b>D</b>", r); |
| break; |
| case SERVER_CLOSING: |
| ap_rputs("</td><td><b>C</b>", r); |
| break; |
| case SERVER_DEAD: |
| ap_rputs("</td><td>.", r); |
| break; |
| case SERVER_GRACEFUL: |
| ap_rputs("</td><td>G", r); |
| break; |
| case SERVER_IDLE_KILL: |
| ap_rputs("</td><td>I", r); |
| break; |
| default: |
| ap_rputs("</td><td>?", r); |
| break; |
| } |
| |
| ap_rprintf(r, |
| "\n</td>" |
| #ifdef HAVE_TIMES |
| "<td>%.2f</td>" |
| #endif |
| "<td>%ld</td><td>%ld</td><td>%" APR_TIME_T_FMT, |
| #ifdef HAVE_TIMES |
| (ws_record->times.tms_utime + |
| ws_record->times.tms_stime + |
| ws_record->times.tms_cutime + |
| ws_record->times.tms_cstime) / tick, |
| #endif |
| (long)apr_time_sec(nowtime - |
| ws_record->last_used), |
| (long)req_time, apr_time_as_msec(duration_slot)); |
| |
| ap_rprintf(r, "</td><td>%-1.1f</td><td>%-2.2f</td><td>%-2.2f\n", |
| (float)conn_bytes / KBYTE, (float) my_bytes / MBYTE, |
| (float)bytes / MBYTE); |
| |
| ap_rprintf(r, "</td><td>%s</td><td>%s</td><td nowrap>%s</td>" |
| "<td nowrap>%s</td></tr>\n\n", |
| ap_escape_html(r->pool, |
| ws_record->client64), |
| ap_escape_html(r->pool, |
| ws_record->protocol), |
| ap_escape_html(r->pool, |
| ws_record->vhost), |
| ap_escape_html(r->pool, |
| ap_escape_logitem(r->pool, |
| ws_record->request))); |
| } /* no_table_report */ |
| } /* for (j...) */ |
| } /* for (i...) */ |
| |
| if (!no_table_report) { |
| ap_rputs("</table>\n \ |
| <hr /> \ |
| <table>\n \ |
| <tr><th>Srv</th><td>Child Server number - generation</td></tr>\n \ |
| <tr><th>PID</th><td>OS process ID</td></tr>\n \ |
| <tr><th>Acc</th><td>Number of accesses this connection / this child / this slot</td></tr>\n \ |
| <tr><th>M</th><td>Mode of operation</td></tr>\n" |
| |
| #ifdef HAVE_TIMES |
| "<tr><th>CPU</th><td>CPU usage, number of seconds</td></tr>\n" |
| #endif |
| |
| "<tr><th>SS</th><td>Seconds since beginning of most recent request</td></tr>\n \ |
| <tr><th>Req</th><td>Milliseconds required to process most recent request</td></tr>\n \ |
| <tr><th>Dur</th><td>Sum of milliseconds required to process all requests</td></tr>\n \ |
| <tr><th>Conn</th><td>Kilobytes transferred this connection</td></tr>\n \ |
| <tr><th>Child</th><td>Megabytes transferred this child</td></tr>\n \ |
| <tr><th>Slot</th><td>Total megabytes transferred this slot</td></tr>\n \ |
| </table>\n", r); |
| } |
| } /* if (ap_extended_status && !short_report) */ |
| else { |
| |
| if (!short_report) { |
| ap_rputs("<hr />To obtain a full report with current status " |
| "information you need to use the " |
| "<code>ExtendedStatus On</code> directive.\n", r); |
| } |
| } |
| |
| { |
| /* Run extension hooks to insert extra content. */ |
| int flags = |
| (short_report ? AP_STATUS_SHORT : 0) | |
| (no_table_report ? AP_STATUS_NOTABLE : 0) | |
| (ap_extended_status ? AP_STATUS_EXTENDED : 0); |
| |
| ap_run_status_hook(r, flags); |
| } |
| |
| if (!short_report) { |
| ap_rputs(ap_psignature("<hr />\n",r), r); |
| ap_rputs("</body></html>\n", r); |
| } |
| |
| return 0; |
| } |
| |
| static int status_pre_config(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp) |
| { |
| /* When mod_status is loaded, default our ExtendedStatus to 'on' |
| * other modules which prefer verbose scoreboards may play a similar game. |
| * If left to their own requirements, mpm modules can make do with simple |
| * scoreboard entries. |
| */ |
| ap_extended_status = 1; |
| return OK; |
| } |
| |
| static int status_init(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, |
| server_rec *s) |
| { |
| status_flags[SERVER_DEAD] = '.'; /* We don't want to assume these are in */ |
| status_flags[SERVER_READY] = '_'; /* any particular order in scoreboard.h */ |
| status_flags[SERVER_STARTING] = 'S'; |
| status_flags[SERVER_BUSY_READ] = 'R'; |
| status_flags[SERVER_BUSY_WRITE] = 'W'; |
| status_flags[SERVER_BUSY_KEEPALIVE] = 'K'; |
| status_flags[SERVER_BUSY_LOG] = 'L'; |
| status_flags[SERVER_BUSY_DNS] = 'D'; |
| status_flags[SERVER_CLOSING] = 'C'; |
| status_flags[SERVER_GRACEFUL] = 'G'; |
| status_flags[SERVER_IDLE_KILL] = 'I'; |
| status_flags[SERVER_DISABLED] = ' '; |
| ap_mpm_query(AP_MPMQ_HARD_LIMIT_THREADS, &thread_limit); |
| ap_mpm_query(AP_MPMQ_HARD_LIMIT_DAEMONS, &server_limit); |
| ap_mpm_query(AP_MPMQ_MAX_THREADS, &threads_per_child); |
| /* work around buggy MPMs */ |
| if (threads_per_child == 0) |
| threads_per_child = 1; |
| ap_mpm_query(AP_MPMQ_MAX_DAEMONS, &max_servers); |
| ap_mpm_query(AP_MPMQ_IS_ASYNC, &is_async); |
| return OK; |
| } |
| |
| #ifdef HAVE_TIMES |
| static void status_child_init(apr_pool_t *p, server_rec *s) |
| { |
| child_pid = getpid(); |
| } |
| #endif |
| |
| static void register_hooks(apr_pool_t *p) |
| { |
| ap_hook_handler(status_handler, NULL, NULL, APR_HOOK_MIDDLE); |
| ap_hook_pre_config(status_pre_config, NULL, NULL, APR_HOOK_LAST); |
| ap_hook_post_config(status_init, NULL, NULL, APR_HOOK_MIDDLE); |
| #ifdef HAVE_TIMES |
| ap_hook_child_init(status_child_init, NULL, NULL, APR_HOOK_MIDDLE); |
| #endif |
| } |
| |
| AP_DECLARE_MODULE(status) = |
| { |
| STANDARD20_MODULE_STUFF, |
| NULL, /* dir config creater */ |
| NULL, /* dir merger --- default is to override */ |
| NULL, /* server config */ |
| NULL, /* merge server config */ |
| NULL, /* command table */ |
| register_hooks /* register_hooks */ |
| }; |