| <?xml version="1.0"?> |
| <!DOCTYPE project [ <!ENTITY desc SYSTEM "../style/description.xml"> ]> |
| |
| <!-- |
| Licensed to the Apache Software Foundation (ASF) under one or more |
| contributor license agreements. See the NOTICE file distributed with |
| this work for additional information regarding copyright ownership. |
| The ASF licenses this file to You under the Apache License, Version 2.0 |
| (the "License"); you may not use this file except in compliance with |
| the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| |
| <project name="manual" default="en" basedir="."> |
| <!-- for a description type 'build -projecthelp' --> |
| &desc; |
| |
| <!-- load prerequisites and dependency defs --> |
| <import file="prereq.xml" /> |
| <import file="deps.xml" /> |
| <import file="../style/lang-targets.xml" /> |
| |
| |
| <!-- #################################################################### --> |
| <!-- build targets --> |
| <!-- #################################################################### --> |
| |
| <target name="dist-all" description="- builds all, zip-all and war-all" |
| depends="all, zip-all, war-all" /> |
| |
| |
| <pathconvert |
| property="ap.docroot" |
| dirsep="${file.separator}" |
| pathsep=" "> |
| <path><pathelement path="..${file.separator}" /></path> |
| </pathconvert> |
| |
| |
| <!-- help --> |
| <!-- ==================================================================== --> |
| <target name="help" description="- use `build -projecthelp` instead!"> |
| <echo message="Try `build -projecthelp`" /> |
| </target> |
| |
| |
| <!-- typemaps --> |
| <!-- ==================================================================== --> |
| <target name="typemaps" depends="metafiles" unless="typemaps.done" |
| description="- (re-)builds all typemap files if necessary"> |
| <echo message="checking typemaps..." /> |
| |
| <dependencies.typemaps /> |
| |
| <!-- iterate over all desired files --> |
| <xslt style="../style/xsl/typemap.xsl" |
| basedir="${ap.docroot}" destdir="${ap.docroot}" |
| includes="**/*.xml.meta"> |
| <patternset refid="excludes" /> |
| <patternset refid="scratch" /> |
| |
| <mapper type="glob" from="*.xml.meta" to="*.html" /> |
| <xmlcatalog refid="w3c-catalog" /> |
| </xslt> |
| |
| <echo message="typemaps are up to date." /> |
| <property name="typemaps.done" value="yes!" /> |
| </target> |
| |
| |
| <!-- convenience rewrite map --> |
| <!-- ==================================================================== --> |
| <target name="convmap" depends="modulelists" unless="convmap.done" |
| description="- (re-)builds convenience map file if necessary"> |
| <echo message="checking convenience map ..." /> |
| |
| <!-- <dependencies.convmap /> --> |
| |
| <xslt style="../style/xsl/convmap.xsl" |
| in="${ap.docroot}/mod/allmodules.xml" |
| out="${ap.docroot}/convenience.map"> |
| <xmlcatalog refid="w3c-catalog" /> |
| </xslt> |
| |
| <echo message="convenience map is up to date." /> |
| <property name="convmap.done" value="yes!" /> |
| </target> |
| |
| |
| <!-- XHTML validation. --> |
| <!-- The resulting output is intended to be valid (X)HTML. Check it from --> |
| <!-- time to time... --> |
| <!-- ==================================================================== --> |
| <target name="validate-xhtml" description="- validates all (X)HTML result files"> |
| <xmlvalidate lenient="false" failonerror="false" warn="true"> |
| <xmlcatalog refid="w3c-catalog" /> |
| <fileset dir="../" includes="**/*.html.*"> |
| <patternset refid="scratch" /> |
| </fileset> |
| </xmlvalidate> |
| </target> |
| |
| |
| <!-- metafiles maintenance target. --> |
| <!-- If you're confused how to edit the *.xml.meta files, just run --> |
| <!-- `build metafiles`, which checks and possibly rebuilds them --> |
| <!-- automatically for you. --> |
| <!-- ==================================================================== --> |
| <target name="metafiles" depends="modulelists" unless="metafiles.done" |
| description="- (re-)builds all *.xml.meta files if necessary"> |
| |
| <dependencies.perlcheck /> |
| |
| <if><equals arg1="${perl.available}" arg2="yes" /><then> |
| <echo message="checking metafiles..." /> |
| |
| <delete> |
| <fileset dir="../" includes=".outdated*" /> |
| </delete> |
| |
| <apply executable="perl" dir="../" parallel="false" failonerror="true"> |
| <env key="DOCROOT" value="${ap.docroot}" /> |
| |
| <arg value="build/lib/metafile.pl" /> |
| <arg value="${inputext.en}" /> |
| <srcfile /> |
| |
| <dirset dir="../"> |
| <patternset refid="scratch" /> |
| <patternset refid="baddirs" /> |
| </dirset> |
| </apply> |
| |
| <echo message="metafiles are up to date." /> |
| </then> |
| <else> |
| <echo message="skipping metafiles (requires a working perl installation in PATH)." /> |
| </else></if> |
| |
| <property name="metafiles.done" value="yes!" /> |
| </target> |
| |
| |
| <!-- modulelists maintenance target. --> |
| <!-- If you're confused how to edit the allmodules.xml* files, just run --> |
| <!-- `build modulelists`, which checks and possibly rebuilds them --> |
| <!-- automatically for you. It's not invoked by default, because it --> |
| <!-- needs a perl installation in PATH. --> |
| <!-- ==================================================================== --> |
| <target name="modulelists" unless="modulelists.done" |
| description="- (re-)builds all allmodules.xml* files if necessary"> |
| |
| <dependencies.perlcheck /> |
| |
| <if><equals arg1="${perl.available}" arg2="yes" /> |
| <then> |
| <echo message="checking modulelists..." /> |
| |
| <exec dir="../" executable="perl"> |
| <env key="DOCROOT" value="${ap.docroot}" /> |
| |
| <arg line="build/lib/allmodules.pl" /> |
| </exec> |
| |
| <echo message="modulelists are up to date." /> |
| </then> |
| <else> |
| <echo message="skipping modulelists (requires a working perl installation in PATH)." /> |
| </else> |
| </if> |
| |
| <property name="modulelists.done" value="yes!" /> |
| </target> |
| |
| |
| <!-- Pack the buildtools --> |
| <!-- --> |
| <!-- This target is mostly useful for the website maintainers to provide --> |
| <!-- a zipped package of the build tool stuff for users without cvs. --> |
| <!-- ==================================================================== --> |
| <target name="tools" description="- builds the zipped tool package"> |
| |
| <dependencies.tools /> |
| |
| <!-- Convenience for windows users --> |
| <copy file="../_tools/lib/LICENSE" tofile="../_tools/lib/LICENSE.txt" /> |
| <copy file="../_tools/lib/README" tofile="../_tools/lib/README.txt" /> |
| <copy file="../_tools/lib/NOTICE" tofile="../_tools/lib/NOTICE.txt" /> |
| |
| <!-- newline issues --> |
| <fixcrlf srcdir="../_tools" eol="crlf" encoding="iso-8859-1" |
| includes="**/*.txt **/*.bat" /> |
| <fixcrlf srcdir="../_tools" eol="lf" encoding="iso-8859-1" |
| includes="**/*.sh **/*.pl |
| **/*.pm **/README |
| **/LICENSE **/NOTICE |
| **/*.xml **/*.dtd **/*.ent" /> |
| |
| <!-- get the current date --> |
| <tstamp> |
| <format property="tools.date" pattern="yyyy-MM-dd" timezone="UTC" /> |
| </tstamp> |
| |
| <!-- and zzzzzzip --> |
| <delete file="${distdir}/tools-${tools.date}.zip" /> |
| <zip destfile="${distdir}/tools-${tools.date}.zip" |
| compress="true" |
| encoding="ASCII"> |
| <zipfileset prefix="build" |
| dir="../_tools" |
| includes="**/*"> |
| </zipfileset> |
| </zip> |
| </target> |
| |
| |
| <!-- clean up scratch directories and files --> |
| <!-- --> |
| <target name="clean" |
| description="- cleans up most generated files and directories"> |
| <delete dir="../_chm" /> |
| <delete dir="../_off" /> |
| <delete dir="../_tools" /> |
| <delete dir="../_dist" /> |
| <delete dir="../style/_generated" /> |
| <delete> |
| <fileset dir="../" includes="**/*.tex **/*.aux **/*.out **/*.log |
| **/*.pdf **/*.toc .outdated* |
| mod/.translated.*" /> |
| </delete> |
| </target> |
| |
| <!-- clean up scratch directories and files --> |
| <!-- --> |
| <target name="extraclean" depends="clean" |
| description="- 'clean' plus the perl generated files (metafiles)"> |
| <delete> |
| <fileset dir="../" includes="**/*.xml.meta mod/allmodules.xml*" /> |
| </delete> |
| |
| <!-- this forces a rebuild of all files next time --> |
| <touch> |
| <fileset dir="../style/lang" includes="*.xml" /> |
| </touch> |
| </target> |
| |
| |
| <!-- bootstrap --> |
| <!-- Boostrap languages --> |
| <!-- ==================================================================== --> |
| <target name="bootstrap" |
| description="- boostraps languages from style/lang/*.xml"> |
| <echo message="starting bootstrap..." /> |
| |
| <dependencies.bootstrap /> |
| |
| <!-- Look for the languages --> |
| <property name="styledir" location="../style/" /> |
| <property name="langdir" location="${styledir}/lang" /> |
| <fileset dir="${langdir}" includes="**/*.xml" id="languagefiles" /> |
| <pathconvert pathsep=" " dirsep="" refid="languagefiles" |
| property="languages"> |
| <mapper type="glob" from="${langdir}/*.xml" to="*" /> |
| </pathconvert> |
| <echo message="Found languages: ${languages}" /> |
| |
| <!-- create basic styles --> |
| <xslt style="../style/xsl/language.xsl" force="yes" |
| basedir="${langdir}" destdir="${styledir}" includes="*.xml"> |
| <mapper type="glob" from="*.xml" to="manual.*.xsl"/> |
| <param name="type" expression="manual" /> |
| </xslt> |
| |
| <!-- create language list (in is unused -> arbitrary xml file) --> |
| <xslt in="../style/lang/en.xml" |
| out="../style/_generated/list.xml" |
| style="../style/xsl/language.xsl" force="yes"> |
| <param name="type" expression="list" /> |
| <param name="langs" expression="${languages}" /> |
| </xslt> |
| |
| <!-- create typemap designation data --> |
| <xslt in="../style/_generated/list.xml" |
| out="../style/xsl/util/designations.xml" |
| style="../style/xsl/language.xsl"> |
| <param name="type" expression="design" /> |
| </xslt> |
| |
| <!-- create language targets --> |
| <xslt in="../style/_generated/list.xml" |
| out="../style/lang-targets.xml" |
| style="../style/xsl/language.xsl"> |
| <param name="type" expression="targets" /> |
| </xslt> |
| |
| <!-- create list of allmodules.xml.* files --> |
| <xslt in="../style/_generated/list.xml" |
| out="../style/xsl/util/allmodules.xml" |
| style="../style/xsl/language.xsl"> |
| <param name="type" expression="modlists" /> |
| </xslt> |
| |
| <!-- create project description --> |
| <xslt in="../style/_generated/list.xml" |
| out="../style/description.xml" |
| style="../style/xsl/language.xsl"> |
| <param name="type" expression="desc" /> |
| </xslt> |
| |
| <echo message="bootstrap done." /> |
| </target> |
| |
| |
| <!-- #################################################################### --> |
| <!-- helper targets, not intended to be called from commandline --> |
| <!-- #################################################################### --> |
| |
| |
| <!-- Generic html transformation task. --> |
| <!-- checks and transforms all files of one language variant to HTML --> |
| <!-- --> |
| <macrodef name="html.generic"> |
| <attribute name="lang" /> |
| |
| <sequential> |
| <echo message="checking HTML documentation (@{lang})..." /> |
| |
| <runtarget target="metafiles" /> |
| <dependencies.html lang="@{lang}" /> |
| |
| <!-- iterate over all desired files --> |
| <for param="srcfile"> |
| <path> |
| <fileset dir="../" includes="**/*${inputext.@{lang}}"> |
| <patternset refid="excludes" /> |
| <patternset refid="scratch" /> |
| </fileset> |
| </path> |
| |
| <sequential> |
| <basename property="@{srcfile}.basename" file="@{srcfile}" |
| suffix="${inputext.@{lang}}" /> |
| <dirname property="@{srcfile}.dirname" file="@{srcfile}" /> |
| |
| <!-- depends on the accompanying metafile --> |
| <dependset> |
| <srcfileset dir="${@{srcfile}.dirname}" |
| includes="${@{srcfile}.basename}.xml.meta" /> |
| <targetfileset dir="${@{srcfile}.dirname}" |
| includes="${@{srcfile}.basename}${outputext.@{lang}}" /> |
| </dependset> |
| |
| <xslt in="@{srcfile}" |
| out="${@{srcfile}.dirname}/${@{srcfile}.basename}${outputext.@{lang}}" |
| style="../style/manual.@{lang}.xsl"> |
| <xmlcatalog refid="w3c-catalog" /> |
| </xslt> |
| </sequential> |
| </for> |
| |
| <if><not><available file="../.outdated.@{lang}" /></not><then> |
| <echo message="HTML documentation (@{lang}) is up to date." /> |
| </then></if> |
| |
| <!-- for convenience --> |
| <runtarget target="typemaps" /> |
| |
| <!-- for caution --> |
| <show.outdated lang="@{lang}" /> |
| |
| </sequential> |
| </macrodef> |
| |
| <macrodef name="show.outdated"> |
| <attribute name="lang" /> |
| |
| <sequential> |
| <if><available file="../.outdated.@{lang}" /><then> |
| <concat> |
| <header> |
| ================================================================ |
| ===== NOTE: The following translations are NOT UP TO DATE: ===== |
| ================================================================ |
| </header> |
| |
| <filelist dir="../" files=".outdated.@{lang}" /> |
| </concat></then> |
| </if> |
| </sequential> |
| </macrodef> |
| |
| |
| <!-- Generic manpage transformation target. --> |
| <!-- checks and transforms all files of one language variant to nroff --> |
| <!-- --> |
| <macrodef name="nroff.generic"> |
| <attribute name="lang" /> |
| |
| <sequential> |
| <echo message="checking nroff man pages (@{lang})..." /> |
| |
| <!-- <runtarget target="metafiles" /> --> |
| <dependencies.nroff lang="@{lang}" /> |
| |
| <!-- iterate over all (8) files --> |
| <nroff.generic.loop lang="@{lang}" section="8" |
| files="ab${inputext.@{lang}} |
| apachectl${inputext.@{lang}} |
| apxs${inputext.@{lang}} |
| httpd${inputext.@{lang}} |
| htcacheclean${inputext.@{lang}} |
| logresolve${inputext.@{lang}} |
| rotatelogs${inputext.@{lang}} |
| suexec${inputext.@{lang}}"/> |
| |
| <!-- iterate over all (1) files --> |
| <nroff.generic.loop lang="@{lang}" section="1" |
| files="dbmmanage${inputext.@{lang}} |
| htdbm${inputext.@{lang}} |
| htdigest${inputext.@{lang}} |
| htpasswd${inputext.@{lang}}"/> |
| |
| <!-- cleanup --> |
| <delete> |
| <fileset dir="../../man" includes="*.tmp *.old" /> |
| </delete> |
| |
| <echo message="nroff manpages (@{lang}) are up to date." /> |
| </sequential> |
| </macrodef> |
| |
| |
| <!-- nroff generation of a single section --> |
| <!-- --> |
| <macrodef name="nroff.generic.loop"> |
| <attribute name="lang" /> |
| <attribute name="section" /> |
| <attribute name="files" /> |
| |
| <sequential> |
| <if><equals arg1="@{lang}" arg2="en" /> |
| <then> |
| <property name="mandir" location="../../man" /> |
| </then> |
| <else> |
| <property name="mandir" location="../../man/@{lang}" /> |
| </else> |
| </if> |
| <for param="srcfile"> |
| <path> |
| <fileset dir="../programs/" includes="@{files}" /> |
| </path> |
| |
| <sequential> |
| <basename property="@{srcfile}.basename" file="@{srcfile}" |
| suffix="${inputext.@{lang}}"/> |
| <dirname property="@{srcfile}.dirname" file="@{srcfile}"/> |
| |
| <dependset> |
| <srcfileset dir="${@{srcfile}.dirname}" |
| includes="${@{srcfile}.basename}.xml.meta" /> |
| <targetfileset dir="${mandir}/" |
| includes="${@{srcfile}.basename}.@{section}" /> |
| </dependset> |
| |
| <if> |
| <not> |
| <uptodate |
| srcfile="@{srcfile}" |
| targetfile="${mandir}/${@{srcfile}.basename}.@{section}" |
| /> |
| </not> |
| <then> |
| <if> |
| <available |
| file="${mandir}/${@{srcfile}.basename}.@{section}.tmp" |
| /> |
| <then> |
| <copy file="${mandir}/${@{srcfile}.basename}.@{section}.tmp" |
| tofile="${mandir}/${@{srcfile}.basename}.@{section}.old" |
| preservelastmodified="true" overwrite="true" /> |
| |
| <!-- sample line: --> |
| <!-- .TH "AB" 8 "2004-01-04" "Apache HTTP Server" "ab" --> |
| <!-- we replace ^^^^^^^^^^ the date with @@date@@ --> |
| <!-- --> |
| <replaceregexp |
| file="${mandir}/${@{srcfile}.basename}.@{section}.tmp" |
| match='^(\.TH\s+"[^"]*"\s+\d\s+)"[^"]+"' |
| replace='\1"@@date@@"' |
| byline="true" |
| /> |
| </then></if> |
| |
| <xslt in="@{srcfile}" |
| out="${mandir}/${@{srcfile}.basename}.@{section}" |
| style="../style/_generated/man.@{lang}.xsl"> |
| <xmlcatalog refid="w3c-catalog" /> |
| <param name="section" expression="@{section}" /> |
| <param name="date" expression="@@date@@" /> |
| </xslt> |
| |
| <if> |
| <and> |
| <available |
| file="${mandir}/${@{srcfile}.basename}.@{section}.old" |
| /> |
| <filesmatch |
| file1="${mandir}/${@{srcfile}.basename}.@{section}.tmp" |
| file2="${mandir}/${@{srcfile}.basename}.@{section}" |
| /> |
| </and> |
| <then> |
| <copy file="${mandir}/${@{srcfile}.basename}.@{section}.old" |
| tofile="${mandir}/${@{srcfile}.basename}.@{section}" |
| preservelastmodified="false" overwrite="true" /> |
| </then> |
| <else> |
| <replaceregexp |
| file="${mandir}/${@{srcfile}.basename}.@{section}" |
| match="@@date@@" |
| replace="${nroff.date}" |
| /> |
| </else></if> |
| </then></if> |
| </sequential> |
| </for> |
| </sequential> |
| </macrodef> |
| |
| |
| <!-- Generic chm transformation target. --> |
| <!-- checks and transforms all files of one language variant to --> |
| <!-- MS compiled html format (chm). The HTML files are different from --> |
| <!-- the normal manual output, so don't worry that everything is --> |
| <!-- compiled again. --> |
| <!-- --> |
| <!-- REQUIREMENTS: --> |
| <!-- (1) You must have the hhc.exe compiler in your PATH. It is part of --> |
| <!-- the HTML Help Workshop which is freely available and can be --> |
| <!-- downloaded from --> |
| <!-- http://msdn.microsoft.com/library/default.asp?url=/library/en-us/htmlhelp/html/hwMicrosoftHTMLHelpDownloads.asp --> |
| <!-- --> |
| <!-- (2) Before you run `build chm-$lang` you MUST switch to the --> |
| <!-- appropriate locale. Otherwise the output of hhc.exe will --> |
| <!-- probably be garbled. --> |
| <!-- --> |
| <macrodef name="chm.generic"> |
| <attribute name="lang" /> |
| |
| <sequential> |
| <echo message="building CHM file (@{lang})..." /> |
| |
| <runtarget target="metafiles" /> |
| <dependencies.chm lang="@{lang}" /> |
| |
| <!-- build project file from sitemap --> |
| <xslt in="../_chm/@{lang}/sitemap${inputext.@{lang}}" |
| out="../_chm/@{lang}/manual.hhp" |
| style="../_chm/@{lang}/style/_generated/hhp.@{lang}.xsl"> |
| <param name="httpd.version" expression="${ap.httpd.version}" /> |
| <xmlcatalog refid="w3c-catalog" /> |
| </xslt> |
| <fixcrlf srcdir="../_chm/@{lang}" eol="crlf" encoding="iso-8859-1" |
| includes="manual.hhp" /> |
| |
| <!-- build toc from sitemap --> |
| <xslt in="../_chm/@{lang}/sitemap${inputext.@{lang}}" |
| out="../_chm/@{lang}/toc.hhc" |
| style="../_chm/@{lang}/style/_generated/hhc.@{lang}.xsl"> |
| <xmlcatalog refid="w3c-catalog" /> |
| </xslt> |
| <fixcrlf srcdir="../_chm/@{lang}" eol="crlf" encoding="iso-8859-1" |
| includes="toc.hhc" /> |
| |
| <!-- build not-yet-translated documents --> |
| <if><not><equals arg1="@{lang}" arg2="en" /></not><then> |
| <chm.generic.loop lang="en" target="@{lang}" /> |
| </then></if> |
| |
| <!-- iterate over all documents --> |
| <chm.generic.loop lang="@{lang}" target="@{lang}" /> |
| |
| <!-- compile it --> |
| <if><not><equals arg1="${chm.prepare}" arg2="yes" /></not><then> |
| <exec dir="../_chm/@{lang}" executable="hhc.exe"> |
| <arg line="manual.hhp" /> |
| </exec> |
| |
| <copy file="../_chm/@{lang}/httpd-docs-${ap.httpd.version}.@{lang}.chm" |
| tofile="${distdir}/httpd-docs-${ap.httpd.version}.@{lang}.chm" |
| overwrite="true" /> |
| </then> |
| <else> |
| <echo message="This is a preparation run only. To actually compile" /> |
| <echo message="the CHM file you need to go into the _chm/@{lang}" /> |
| <echo message="directory and run 'hhc.exe manual'. Don't forget the" /> |
| <echo message="appropriate locale (see `build -projecthelp`)" /> |
| </else></if> |
| </sequential> |
| </macrodef> |
| |
| <macrodef name="chm.generic.loop"> |
| <attribute name="lang" /> |
| <attribute name="target" /> |
| |
| <sequential> |
| <for param="srcfile"> |
| <path> |
| <fileset dir="../_chm/@{target}" includes="**/*${inputext.@{lang}}"> |
| <patternset refid="excludes" /> |
| </fileset> |
| </path> |
| |
| <sequential> |
| <basename property="@{srcfile}.basename" file="@{srcfile}" |
| suffix="${inputext.@{lang}}"/> |
| <dirname property="@{srcfile}.dirname" file="@{srcfile}"/> |
| |
| <!-- just do it --> |
| <xslt in="@{srcfile}" |
| out="${@{srcfile}.dirname}/${@{srcfile}.basename}.html" |
| style="../_chm/@{target}/style/_generated/chm.@{lang}.xsl" |
| force="yes"> |
| <xmlcatalog refid="w3c-catalog" /> |
| </xslt> |
| |
| <fixcrlf srcdir="${@{srcfile}.dirname}" eol="crlf" |
| encoding="iso-8859-1" |
| includes="${@{srcfile}.basename}.html" /> |
| </sequential> |
| </for> |
| </sequential> |
| </macrodef> |
| |
| |
| <!-- Generic zip package transformation target. --> |
| <!-- checks and transforms all files of one language variant to --> |
| <!-- simple html files and zips the resulting directory. The HTML files --> |
| <!-- are different from the normal manual output, so don't worry that --> |
| <!-- everything is transformed again. --> |
| <!-- --> |
| <macrodef name="offline.generic"> |
| <attribute name="lang" /> |
| <attribute name="style" /> |
| <attribute name="dir" /> |
| |
| <sequential> |
| <if><available file="../index${inputext.@{lang}}" /> |
| <then> |
| <echo message="building offline version (@{lang})..." /> |
| |
| <!-- build not-yet-translated documents --> |
| <if><not><equals arg1="@{lang}" arg2="en" /></not><then> |
| <offline.generic.loop lang="en" target="@{lang}" style="@{style}" |
| dir="@{dir}" /> |
| </then></if> |
| |
| <!-- iterate over our documents --> |
| <offline.generic.loop lang="@{lang}" target="@{lang}" style="@{style}" |
| dir="@{dir}" /> |
| |
| <!-- Newline issues --> |
| <fixcrlf srcdir="../@{dir}/@{lang}" eol="lf" encoding="iso-8859-1" |
| includes="**/*.html **/*.css" /> |
| |
| <!-- delete undistributed files --> |
| <delete> |
| <fileset dir="../@{dir}/@{lang}" |
| includes="**/*.xml **/*${inputext.@{lang}} |
| **/*.xml.meta |
| style/chm style/chm/**/* |
| style/lang style/lang/**/* |
| style/man style/man/**/* |
| style/w3c style/w3c/**/* |
| style/xsl style/xsl/**/* |
| style/zip style/zip/**/* |
| style/latex style/latex/**/* |
| style/*.dtd style/*.xsl style/*.xml |
| style/_generated style/_generated/**/* |
| style/build.properties |
| images/apache_header* |
| images/favicon.ico |
| images/home* images/index* |
| images/sub* images/pixel* |
| **/.* |
| "/> |
| </delete> |
| </then></if> |
| </sequential> |
| </macrodef> |
| |
| <macrodef name="offline.generic.loop"> |
| <attribute name="lang" /> |
| <attribute name="target" /> |
| <attribute name="style" /> |
| <attribute name="dir" /> |
| |
| <sequential> |
| <for param="srcfile"> |
| <path> |
| <fileset dir="../@{dir}/@{target}" includes="**/*${inputext.@{lang}}"> |
| <patternset refid="excludes" /> |
| </fileset> |
| </path> |
| |
| <sequential> |
| <basename property="@{srcfile}.basename" file="@{srcfile}" |
| suffix="${inputext.@{lang}}"/> |
| <dirname property="@{srcfile}.dirname" file="@{srcfile}"/> |
| |
| <xslt in="@{srcfile}" |
| out="${@{srcfile}.dirname}/${@{srcfile}.basename}.html" |
| style="../@{dir}/@{target}/style/_generated/@{style}.@{lang}.xsl" |
| force="yes"> |
| <xmlcatalog refid="w3c-catalog" /> |
| </xslt> |
| </sequential> |
| </for> |
| </sequential> |
| </macrodef> |
| |
| <macrodef name="war.generic"> |
| <attribute name="lang" /> |
| |
| <sequential> |
| <if><available file="../index${inputext.@{lang}}" /> |
| <then> |
| <echo message="building Konqueror Web Archive package (@{lang})..." /> |
| |
| <!-- pack it --> |
| <delete file="${distdir}/httpd-docs-${ap.httpd.version}.@{lang}.war" /> |
| <tar destfile="${distdir}/httpd-docs-${ap.httpd.version}.@{lang}.war" |
| compression="gzip"> |
| <tarfileset dir="../_off/@{lang}" |
| includes="**/*" |
| excludes="index.rdf" /> |
| </tar> |
| </then></if> |
| </sequential> |
| </macrodef> |
| |
| <macrodef name="zip.generic"> |
| <attribute name="lang" /> |
| |
| <sequential> |
| <if><available file="../index${inputext.@{lang}}" /> |
| <then> |
| <echo message="building ZIP package (@{lang})..." /> |
| |
| <!-- pack it --> |
| <delete file="${distdir}/httpd-docs-${ap.httpd.version}.@{lang}.zip" /> |
| <zip destfile="${distdir}/httpd-docs-${ap.httpd.version}.@{lang}.zip" |
| compress="true" |
| encoding="ASCII"> |
| <zipfileset prefix="httpd-docs-${ap.httpd.version}.@{lang}" |
| dir="../_off/@{lang}" |
| includes="**/*" /> |
| </zip> |
| </then></if> |
| </sequential> |
| </macrodef> |
| |
| <!-- Generation of a single latex file; for now, en only. --> |
| <!-- --> |
| <!-- You'll have to run another tool to post-process the resulting latex --> |
| <!-- files into a usable PDF file. For example pdflatex together with --> |
| <!-- sitemap.tex can be used for this: just call 'pdflatex sitemap' in --> |
| <!-- the manual dir. --> |
| <!-- ==================================================================== --> |
| <macrodef name="latex.generic"> |
| <attribute name="lang" /> |
| |
| <sequential> |
| <for param="srcfile"> |
| <path> |
| <fileset dir="../" includes="**/*${inputext.@{lang}}"> |
| <patternset refid="excludes" /> |
| <patternset refid="scratch" /> |
| </fileset> |
| </path> |
| |
| <sequential> |
| <basename property="@{srcfile}.basename" file="@{srcfile}" |
| suffix="${inputext.@{lang}}"/> |
| <dirname property="@{srcfile}.dirname" file="@{srcfile}"/> |
| |
| <xslt in="@{srcfile}" |
| out="${@{srcfile}.dirname}/${@{srcfile}.basename}.tex" |
| style="../style/latex/latex.xsl"> |
| <xmlcatalog refid="w3c-catalog" /> |
| </xslt> |
| </sequential> |
| </for> |
| </sequential> |
| </macrodef> |
| |
| </project> |