| #------------------------------------------------------------------------- |
| # |
| # Makefile for src/interfaces/libpq library |
| # |
| # Portions Copyright (c) 1996-2010, PostgreSQL Global Development Group |
| # Portions Copyright (c) 1994, Regents of the University of California |
| # |
| # $PostgreSQL: pgsql/src/interfaces/libpq/Makefile,v 1.159.2.3 2008/10/01 15:35:34 mha Exp $ |
| # |
| #------------------------------------------------------------------------- |
| |
| subdir = src/interfaces/libpq |
| top_builddir = ../../.. |
| include $(top_builddir)/src/Makefile.global |
| |
| |
| # shared library parameters |
| NAME= pq |
| SO_MAJOR_VERSION= 5 |
| SO_MINOR_VERSION= 3 |
| |
| override CPPFLAGS := -DFRONTEND -DUNSAFE_STAT_OK -I$(srcdir) $(CPPFLAGS) -I$(top_builddir)/src/port -I$(top_srcdir)/src/port |
| ifneq ($(PORTNAME), win32) |
| override CFLAGS += $(PTHREAD_CFLAGS) |
| endif |
| |
| # Need to recompile any libpgport object files because we need these |
| # object files to use the same compile flags as libpq. If we used |
| # the object files from libpgport, this would not be true on all |
| # platforms. |
| LIBS := $(LIBS:-lpgport=) |
| |
| # The frontend doesn't need everything that's in LIBS, some are backend only |
| LIBS := $(filter-out -lresolv -lbz2, $(LIBS)) |
| |
| OBJS= fe-auth.o fe-connect.o fe-exec.o fe-misc.o fe-print.o fe-lobj.o \ |
| fe-protocol2.o fe-protocol3.o pqexpbuffer.o pqsignal.o fe-secure.o \ |
| libpq-events.o \ |
| md5.o ip.o wchar.o encnames.o noblock.o pgstrcasecmp.o thread.o strlcpy.o \ |
| $(filter crypt.o getaddrinfo.o inet_aton.o open.o snprintf.o strerror.o win32error.o, $(LIBOBJS)) |
| |
| ifeq ($(PORTNAME), cygwin) |
| override shlib = cyg$(NAME)$(DLSUFFIX) |
| endif |
| |
| ifeq ($(PORTNAME), win32) |
| OBJS += win32.o pgsleep.o libpqrc.o |
| |
| libpqrc.o: libpq.rc |
| $(WINDRES) -i $< -o $@ |
| |
| ifeq ($(enable_thread_safety), yes) |
| OBJS += pthread-win32.o |
| endif |
| endif |
| |
| |
| # Add libraries that libpq depends (or might depend) on into the |
| # shared library link. (The order in which you list them here doesn't |
| # matter.) |
| ifneq ($(PORTNAME), win32) |
| SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi_krb5 -lgss -lgssapi -lssl -lsocket -lnsl -lresolv -lintl, $(LIBS)) $(LDAP_LIBS_FE) $(PTHREAD_LIBS) |
| else |
| SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi32 -lssl -lsocket -lnsl -lresolv -lintl $(PTHREAD_LIBS), $(LIBS)) $(LDAP_LIBS_FE) |
| endif |
| ifeq ($(PORTNAME), win32) |
| SHLIB_LINK += -lshfolder -lwsock32 -lws2_32 -lsecur32 $(filter -leay32 -lssleay32 -lcomerr32 -lkrb5_32, $(LIBS)) |
| endif |
| |
| SHLIB_EXPORTS = exports.txt |
| |
| all: all-lib |
| |
| # Shared library stuff |
| include $(top_srcdir)/src/Makefile.shlib |
| backend_src = $(top_srcdir)/src/backend |
| |
| |
| # We use several backend modules verbatim, but since we need to |
| # compile with appropriate options to build a shared lib, we can't |
| # necessarily use the same object files as the backend uses. Instead, |
| # symlink the source files in here and build our own object file. |
| # For port modules, this only happens if configure decides the module |
| # is needed (see filter hack in OBJS, above). |
| |
| crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c thread.c win32error.c pgsleep.c: % : $(top_srcdir)/src/port/% |
| rm -f $@ && $(LN_S) $< . |
| |
| md5.c ip.c: % : $(backend_src)/libpq/% |
| rm -f $@ && $(LN_S) $< . |
| |
| encnames.c wchar.c : % : $(backend_src)/utils/mb/% |
| rm -f $@ && $(LN_S) $< . |
| |
| |
| distprep: libpq-dist.rc |
| |
| libpq.rc libpq-dist.rc: libpq.rc.in |
| sed -e 's/\(VERSION.*\),0 *$$/\1,'`date '+%y%j' | sed 's/^0*//'`'/' $< >$@ |
| |
| # Depend on Makefile.global to force rebuild on re-run of configure. |
| # (But libpq-dist.rc is shipped in the distribution for shell-less |
| # installations and is only updated by distprep.) |
| libpq.rc: $(top_builddir)/src/Makefile.global |
| |
| fe-connect.o: fe-connect.c $(top_builddir)/src/port/pg_config_paths.h |
| |
| $(top_builddir)/src/port/pg_config_paths.h: |
| $(MAKE) -C $(top_builddir)/src/port pg_config_paths.h |
| |
| install: all installdirs install-lib |
| $(INSTALL_DATA) $(srcdir)/libpq-fe.h '$(DESTDIR)$(includedir)' |
| $(INSTALL_DATA) $(srcdir)/libpq-events.h '$(DESTDIR)$(includedir)' |
| $(INSTALL_DATA) $(srcdir)/libpq-int.h '$(DESTDIR)$(includedir_internal)' |
| $(INSTALL_DATA) $(srcdir)/pqexpbuffer.h '$(DESTDIR)$(includedir_internal)' |
| $(INSTALL_DATA) $(srcdir)/pg_service.conf.sample '$(DESTDIR)$(datadir)/pg_service.conf.sample' |
| |
| installdirs: installdirs-lib |
| $(MKDIR_P) '$(DESTDIR)$(includedir)' '$(DESTDIR)$(includedir_internal)' |
| |
| uninstall: uninstall-lib |
| rm -f '$(DESTDIR)$(includedir)/libpq-fe.h' |
| rm -f '$(DESTDIR)$(includedir)/libpq-events.h' |
| rm -f '$(DESTDIR)$(includedir_internal)/libpq-int.h' |
| rm -f '$(DESTDIR)$(includedir_internal)/pqexpbuffer.h' |
| rm -f '$(DESTDIR)$(datadir)/pg_service.conf.sample' |
| |
| clean distclean: clean-lib |
| rm -f $(OBJS) pg_config_paths.h crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c thread.c md5.c ip.c encnames.c wchar.c win32error.c pgsleep.c pthread.h libpq.rc exports.list |
| # Might be left over from a Win32 client-only build |
| rm -f pg_config_paths.h |
| |
| maintainer-clean: distclean maintainer-clean-lib |
| rm -f libpq-dist.rc |