src/backend/storage/ipc/pmsignal.c

/*-------------------------------------------------------------------------
 *
 * pmsignal.c
 *	  routines for signaling the postmaster from its child processes
 *
 *
 * Portions Copyright (c) 1996-2009, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 * IDENTIFICATION
 *	  $PostgreSQL: pgsql/src/backend/storage/ipc/pmsignal.c,v 1.28 2009/06/11 14:49:01 momjian Exp $
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <signal.h>
#include <unistd.h>

#include "miscadmin.h"
#include "postmaster/postmaster.h"
#include "storage/pmsignal.h"
#include "storage/shmem.h"


/*
 * The postmaster is signaled by its children by sending SIGUSR1.  The
 * specific reason is communicated via flags in shared memory.	We keep
 * a boolean flag for each possible "reason", so that different reasons
 * can be signaled by different backends at the same time.	(However,
 * if the same reason is signaled more than once simultaneously, the
 * postmaster will observe it only once.)
 *
 * The flags are actually declared as "volatile sig_atomic_t" for maximum
 * portability.  This should ensure that loads and stores of the flag
 * values are atomic, allowing us to dispense with any explicit locking.
 *
 * In addition to the per-reason flags, we store a set of per-child-process
 * flags that are currently used only for detecting whether a backend has
 * exited without performing proper shutdown.  The per-child-process flags
 * have three possible states: UNUSED, ASSIGNED, ACTIVE.  An UNUSED slot is
 * available for assignment.  An ASSIGNED slot is associated with a postmaster
 * child process, but either the process has not touched shared memory yet,
 * or it has successfully cleaned up after itself.	A ACTIVE slot means the
 * process is actively using shared memory.  The slots are assigned to
 * child processes at random, and postmaster.c is responsible for tracking
 * which one goes with which PID.
 */

#define PM_CHILD_UNUSED		0	/* these values must fit in sig_atomic_t */
#define PM_CHILD_ASSIGNED	1
#define PM_CHILD_ACTIVE		2

/* "typedef struct PMSignalData PMSignalData" appears in pmsignal.h */
struct PMSignalData
{
	/* per-reason flags */
	sig_atomic_t PMSignalFlags[NUM_PMSIGNALS];
	/* per-child-process flags */
	int			num_child_flags;	/* # of entries in PMChildFlags[] */
	int			next_child_flag;	/* next slot to try to assign */
	sig_atomic_t PMChildFlags[1];		/* VARIABLE LENGTH ARRAY */
};

NON_EXEC_STATIC volatile PMSignalData *PMSignalState = NULL;


/*
 * PMSignalShmemSize
 *		Compute space needed for pmsignal.c's shared memory
 */
Size
PMSignalShmemSize(void)
{
	Size		size;

	size = offsetof(PMSignalData, PMChildFlags);
	size = add_size(size, mul_size(MaxLivePostmasterChildren(),
								   sizeof(sig_atomic_t)));

	return size;
}

/*
 * PMSignalShmemInit - initialize during shared-memory creation
 */
void
PMSignalShmemInit(void)
{
	bool		found;

	PMSignalState = (PMSignalData *)
		ShmemInitStruct("PMSignalState", PMSignalShmemSize(), &found);

	if (!found)
	{
		MemSet(PMSignalState, 0, PMSignalShmemSize());
		PMSignalState->num_child_flags = MaxLivePostmasterChildren();
	}
}

/*
 * SendPostmasterSignal - signal the postmaster from a child process
 */
void
SendPostmasterSignal(PMSignalReason reason)
{
	/* If called in a standalone backend, do nothing */
	if (!IsUnderPostmaster)
		return;
	/* Atomically set the proper flag */
	PMSignalState->PMSignalFlags[reason] = true;
	/* Send signal to postmaster */
	kill(PostmasterPid, SIGUSR1);
}

/*
 * CheckPostmasterSignal - check to see if a particular reason has been
 * signaled, and clear the signal flag.  Should be called by postmaster
 * after receiving SIGUSR1.
 */
bool
CheckPostmasterSignal(PMSignalReason reason)
{
	/* Careful here --- don't clear flag if we haven't seen it set */
	if (PMSignalState->PMSignalFlags[reason])
	{
		PMSignalState->PMSignalFlags[reason] = false;
		return true;
	}
	return false;
}


/*
 * AssignPostmasterChildSlot - select an unused slot for a new postmaster
 * child process, and set its state to ASSIGNED.  Returns a slot number
 * (one to N).
 *
 * Only the postmaster is allowed to execute this routine, so we need no
 * special locking.
 */
int
AssignPostmasterChildSlot(void)
{
	int			slot = PMSignalState->next_child_flag;
	int			n;

	/*
	 * Scan for a free slot.  We track the last slot assigned so as not to
	 * waste time repeatedly rescanning low-numbered slots.
	 */
	for (n = PMSignalState->num_child_flags; n > 0; n--)
	{
		if (--slot < 0)
			slot = PMSignalState->num_child_flags - 1;
		if (PMSignalState->PMChildFlags[slot] == PM_CHILD_UNUSED)
		{
			PMSignalState->PMChildFlags[slot] = PM_CHILD_ASSIGNED;
			PMSignalState->next_child_flag = slot;
			return slot + 1;
		}
	}

	/* Out of slots ... should never happen, else postmaster.c messed up */
	elog(FATAL, "no free slots in PMChildFlags array");
	return 0;					/* keep compiler quiet */
}

/*
 * ReleasePostmasterChildSlot - release a slot after death of a postmaster
 * child process.  This must be called in the postmaster process.
 *
 * Returns true if the slot had been in ASSIGNED state (the expected case),
 * false otherwise (implying that the child failed to clean itself up).
 */
bool
ReleasePostmasterChildSlot(int slot)
{
	bool		result;

	Assert(slot > 0 && slot <= PMSignalState->num_child_flags);
	slot--;

	/*
	 * Note: the slot state might already be unused, because the logic in
	 * postmaster.c is such that this might get called twice when a child
	 * crashes.  So we don't try to Assert anything about the state.
	 */
	result = (PMSignalState->PMChildFlags[slot] == PM_CHILD_ASSIGNED);
	PMSignalState->PMChildFlags[slot] = PM_CHILD_UNUSED;
	return result;
}

/*
 * MarkPostmasterChildActive - mark a postmaster child as about to begin
 * actively using shared memory.  This is called in the child process.
 */
void
MarkPostmasterChildActive(void)
{
	int			slot = MyPMChildSlot;

	Assert(slot > 0 && slot <= PMSignalState->num_child_flags);
	slot--;
	Assert(PMSignalState->PMChildFlags[slot] == PM_CHILD_ASSIGNED);
	PMSignalState->PMChildFlags[slot] = PM_CHILD_ACTIVE;
}

/*
 * MarkPostmasterChildInactive - mark a postmaster child as done using
 * shared memory.  This is called in the child process.
 */
void
MarkPostmasterChildInactive(void)
{
	int			slot = MyPMChildSlot;

	Assert(slot > 0 && slot <= PMSignalState->num_child_flags);
	slot--;
	Assert(PMSignalState->PMChildFlags[slot] == PM_CHILD_ACTIVE);
	PMSignalState->PMChildFlags[slot] = PM_CHILD_ASSIGNED;
}


/*
 * PostmasterIsAlive - check whether postmaster process is still alive
 *
 * amDirectChild should be passed as "true" by code that knows it is
 * executing in a direct child process of the postmaster; pass "false"
 * if an indirect child or not sure.  The "true" case uses a faster and
 * more reliable test, so use it when possible.
 */
bool
PostmasterIsAlive(bool amDirectChild)
{
#ifndef WIN32
	if (amDirectChild)
	{
		/*
		 * If the postmaster is alive, we'll still be its child.  If it's
		 * died, we'll be reassigned as a child of the init process.
		 */
#ifdef __darwin__
		/*
		 * When attached w/gdb on OSX, gdb becomes parent of debugged process!
		 * If we are direct child of postmaster and end up as child of
		 * init, the postmaster musta died. This, of course, fails to detect
		 * death of postmaster while this process is attached to gdb - but
		 * that's easier to deal w/than being difficult to use gdb in the
		 * normal case.
		 */
		return(getppid() != 1 /* init's pid */);
#else  /* __darwin__ */
		return (getppid() == PostmasterPid);
#endif /* __darwin__ */
	}
	else
	{
		/*
		 * Use kill() to see if the postmaster is still alive.	This can
		 * sometimes give a false positive result, since the postmaster's PID
		 * may get recycled, but it is good enough for existing uses by
		 * indirect children.
		 */
		return (kill(PostmasterPid, 0) == 0);
	}
#else							/* WIN32 */
	return (WaitForSingleObject(PostmasterHandle, 0) == WAIT_TIMEOUT);
#endif   /* WIN32 */
}


/*
 * ParentIsAlive - check whether parent process is still alive;
 */
bool
ParentProcIsAlive()
{
	/* if parent exits, init process (PID 1) is reported as parent */
	return (getppid() != 1);
}