hadoop-hdfs-project/hadoop-hdfs/src/site/apt/Federation.apt.vm

~~ Licensed under the Apache License, Version 2.0 (the "License");
~~ you may not use this file except in compliance with the License.
~~ You may obtain a copy of the License at
~~
~~   http://www.apache.org/licenses/LICENSE-2.0
~~
~~ Unless required by applicable law or agreed to in writing, software
~~ distributed under the License is distributed on an "AS IS" BASIS,
~~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
~~ See the License for the specific language governing permissions and
~~ limitations under the License. See accompanying LICENSE file.

  ---
  Hadoop Distributed File System-${project.version} - Federation
  ---
  ---
  ${maven.build.timestamp}

HDFS Federation

  \[ {{{./index.html}Go Back}} \]

%{toc|section=1|fromDepth=0}

  This guide provides an overview of the HDFS Federation feature and
  how to configure and manage the federated cluster.

* {Background}

[./federation-background.gif] HDFS Layers

  HDFS has two main layers:

  * <<Namespace>>

    * Consists of directories, files and blocks

    * It supports all the namespace related file system operations such as 
      create, delete, modify and list files and directories.

  * <<Block Storage Service>> has two parts

    * Block Management (which is done in Namenode)

      * Provides datanode cluster membership by handling registrations, and 
        periodic heart beats.

      * Processes block reports and maintains location of blocks.

      * Supports block related operations such as create, delete, modify and 
        get block location.

      * Manages replica placement and replication of a block for under 
        replicated blocks and deletes blocks that are over replicated.

    * Storage - is provided by datanodes by storing blocks on the local file 
      system and allows read/write access.

  The prior HDFS architecture allows only a single namespace for the 
  entire cluster. A single Namenode manages this namespace. HDFS 
  Federation addresses limitation of the prior architecture by adding 
  support multiple Namenodes/namespaces to HDFS file system.
    
* {Multiple Namenodes/Namespaces}

  In order to scale the name service horizontally, federation uses multiple 
  independent Namenodes/namespaces. The Namenodes are federated, that is, the 
  Namenodes are independent and don’t require coordination with each other. 
  The datanodes are used as common storage for blocks by all the Namenodes. 
  Each datanode registers with all the Namenodes in the cluster. Datanodes 
  send periodic heartbeats and block reports and handles commands from the 
  Namenodes.

[./federation.gif] HDFS Federation Architecture


  <<Block Pool>>

  A Block Pool is a set of blocks that belong to a single namespace. 
  Datanodes store blocks for all the block pools in the cluster.
  It is managed independently of other block pools. This allows a namespace 
  to generate Block IDs for new blocks without the need for coordination 
  with the other namespaces. The failure of a Namenode does not prevent 
  the datanode from serving other Namenodes in the cluster.

  A Namespace and its block pool together are called Namespace Volume. 
  It is a self-contained unit of management. When a Namenode/namespace 
  is deleted, the corresponding block pool at the datanodes is deleted.
  Each namespace volume is upgraded as a unit, during cluster upgrade.

  <<ClusterID>>

  A new identifier <<ClusterID>> is added to identify all the nodes in 
  the cluster.  When a Namenode is formatted, this identifier is provided 
  or auto generated. This ID should be used for formatting the other 
  Namenodes into the cluster.

** Key Benefits

  * Namespace Scalability - HDFS cluster storage scales horizontally but 
    the namespace does not. Large deployments or deployments using lot 
    of small files benefit from scaling the namespace by adding more 
    Namenodes to the cluster

  * Performance - File system operation throughput is limited by a single
    Namenode in the prior architecture. Adding more Namenodes to the cluster
    scales the file system read/write operations throughput.

  * Isolation - A single Namenode offers no isolation in multi user 
    environment. An experimental application can overload the Namenode 
    and slow down production critical applications. With multiple Namenodes, 
    different categories of applications and users can be isolated to 
    different namespaces.

* {Federation Configuration}

  Federation configuration is <<backward compatible>> and allows existing 
  single Namenode configuration to work without any change. The new 
  configuration is designed such that all the nodes in the cluster have 
  same configuration without the need for deploying different configuration 
  based on the type of the node in the cluster.

  A new abstraction called <<<NameServiceID>>> is added with
  federation. The Namenode and its corresponding secondary/backup/checkpointer
  nodes belong to this. To support single configuration file, the Namenode and
  secondary/backup/checkpointer configuration parameters are suffixed with
  <<<NameServiceID>>> and are added to the same configuration file.


** Configuration:

  <<Step 1>>: Add the following parameters to your configuration:
  <<<dfs.federation.nameservices>>>: Configure with list of comma separated 
  NameServiceIDs. This will be used by Datanodes to determine all the 
  Namenodes in the cluster.
  
  <<Step 2>>: For each Namenode and Secondary Namenode/BackupNode/Checkpointer 
  add the following configuration suffixed with the corresponding 
  <<<NameServiceID>>> into the common configuration file.

*---------------------+--------------------------------------------+
|| Daemon             || Configuration Parameter                   |
*---------------------+--------------------------------------------+
| Namenode            | <<<dfs.namenode.rpc-address>>>             |
|                     | <<<dfs.namenode.servicerpc-address>>>      |
|                     | <<<dfs.namenode.http-address>>>            |
|                     | <<<dfs.namenode.https-address>>>           |
|                     | <<<dfs.namenode.keytab.file>>>             |
|                     | <<<dfs.namenode.name.dir>>>                |
|                     | <<<dfs.namenode.edits.dir>>>               |
|                     | <<<dfs.namenode.checkpoint.dir>>>          |
|                     | <<<dfs.namenode.checkpoint.edits.dir>>>    |
*---------------------+--------------------------------------------+
| Secondary Namenode  | <<<dfs.namenode.secondary.http-address>>>  |
|                     | <<<dfs.secondary.namenode.keytab.file>>>   |
*---------------------+--------------------------------------------+
| BackupNode          | <<<dfs.namenode.backup.address>>>          |
|                     | <<<dfs.secondary.namenode.keytab.file>>>   |
*---------------------+--------------------------------------------+
    
  Here is an example configuration with two namenodes:

----
<configuration>
  <property>
    <name>dfs.federation.nameservices</name>
    <value>ns1,ns2</value>
  </property>
  <property>
    <name>dfs.namenode.rpc-address.ns1</name>
    <value>nn-host1:rpc-port</value>
  </property>
  <property>
    <name>dfs.namenode.http-address.ns1</name>
    <value>nn-host1:http-port</value>
  </property>
  <property>
    <name>dfs.namenode.secondaryhttp-address.ns1</name>
    <value>snn-host1:http-port</value>
  </property>
  <property>
    <name>dfs.namenode.rpc-address.ns2</name>
    <value>nn-host2:rpc-port</value>
  </property>
  <property>
    <name>dfs.namenode.http-address.ns2</name>
    <value>nn-host2:http-port</value>
  </property>
  <property>
    <name>dfs.namenode.secondaryhttp-address.ns2</name>
    <value>snn-host2:http-port</value>
  </property>

  .... Other common configuration ...
</configuration>
----

** Formatting Namenodes

  <<Step 1>>: Format a namenode using the following command:
  
----
> $HADOOP_PREFIX_HOME/bin/hdfs namenode -format [-clusterId <cluster_id>]
----
  Choose a unique cluster_id, which will not conflict other clusters in 
  your environment. If it is not provided, then a unique ClusterID is 
  auto generated.

  <<Step 2>>: Format additional namenode using the following command:

----
> $HADOOP_PREFIX_HOME/bin/hdfs namenode -format -clusterId <cluster_id>
----
  Note that the cluster_id in step 2 must be same as that of the 
  cluster_id in step 1. If they are different, the additional Namenodes 
  will not be part of the federated cluster.

** Upgrading from older release to 0.23 and configuring federation

  Older releases supported a single Namenode. Here are the steps enable 
  federation:

  Step 1: Upgrade the cluster to newer release. During upgrade you can 
  provide a ClusterID as follows:

----
> $HADOOP_PREFIX_HOME/bin/hdfs start namenode --config $HADOOP_CONF_DIR  -upgrade -clusterId <cluster_ID>
----
  If ClusterID is not provided, it is auto generated.

** Adding a new Namenode to an existing HDFS cluster

  Follow the following steps:

  * Add configuration parameter <<<dfs.federation.nameservices>>> to 
    the configuration.

  * Update the configuration with NameServiceID suffix. Configuration 
    key names have changed post release 0.20. You must use new configuration 
    parameter names, for federation.

  * Add new Namenode related config to the configuration files.

  * Propagate the configuration file to the all the nodes in the cluster.

  * Start the new Namenode, Secondary/Backup.

  * Refresh the datanodes to pickup the newly added Namenode by running 
    the following command:

----
> $HADOOP_PREFIX_HOME/bin/hdfs dfadmin -refreshNameNode <datanode_host_name>:<datanode_rpc_port>
----

  * The above command must be run against all the datanodes in the cluster.

* {Managing the cluster}

**  Starting and stopping cluster

  To start the cluster run the following command:

----
> $HADOOP_PREFIX_HOME/bin/start-dfs.sh
----

  To stop the cluster run the following command:

----
> $HADOOP_PREFIX_HOME/bin/stop-dfs.sh
----

  These commands can be run from any node where the HDFS configuration is 
  available.  The command uses configuration to determine the Namenodes 
  in the cluster and starts the Namenode process on those nodes. The 
  datanodes are started on nodes specified in the <<<slaves>>> file. The 
  script can be used as reference for building your own scripts for 
  starting and stopping the cluster.

**  Balancer

  Balancer has been changed to work with multiple Namenodes in the cluster to 
  balance the cluster. Balancer can be run using the command:

----
"$HADOOP_PREFIX"/bin/hadoop-daemon.sh --config $HADOOP_CONF_DIR --script "$bin"/hdfs start balancer [-policy <policy>]
----

  Policy could be:

  * <<<node>>> - this is the <default> policy. This balances the storage at 
    the datanode level. This is similar to balancing policy from prior releases.

  * <<<blockpool>>> - this balances the storage at the block pool level. 
    Balancing at block pool level balances storage at the datanode level also.

  Note that Balander only balances the data and does not balance the namespace.

** Decommissioning

  Decommissioning is similar to prior releases. The nodes that need to be 
  decomissioned are added to the exclude file at all the Namenode. Each 
  Namenode decommissions its Block Pool. When all the Namenodes finish 
  decommissioning a datanode, the datanode is considered to be decommissioned.

  <<Step 1>>: To distributed an exclude file to all the Namenodes, use the 
  following command:

----
"$HADOOP_PREFIX"/bin/distributed-exclude.sh <exclude_file>
----

  <<Step 2>>: Refresh all the Namenodes to pick up the new exclude file.

----
"$HADOOP_PREFIX"/bin/refresh-namenodes.sh
----
 
  The above command uses HDFS configuration to determine the Namenodes 
  configured in the cluster and refreshes all the Namenodes to pick up 
  the new exclude file.

** Cluster Web Console

  Similar to Namenode status web page, a Cluster Web Console is added in 
  federation to monitor the federated cluster at 
  <<<http://<any_nn_host:port>/dfsclusterhealth.jsp>>>.
  Any Namenode in the cluster can be used to access this web page.

  The web page provides the following information:

  * Cluster summary that shows number of files, number of blocks and 
    total configured storage capacity, available and used storage information 
    for the entire cluster.

  * Provides list of Namenodes and summary that includes number of files,
    blocks, missing blocks, number of live and dead data nodes for each 
    Namenode. It also provides a link to conveniently access Namenode web UI.

  * It also provides decommissioning status of datanodes.