| /* |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| */ |
| |
| #include "config.h" |
| |
| #include "guacamole/client.h" |
| #include "guacamole/error.h" |
| #include "guacamole/parser.h" |
| #include "guacamole/protocol.h" |
| #include "guacamole/socket.h" |
| #include "guacamole/user.h" |
| #include "user-handlers.h" |
| |
| #include <pthread.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| /** |
| * Parameters required by the user input thread. |
| */ |
| typedef struct guac_user_input_thread_params { |
| |
| /** |
| * The parser which will be used throughout the user's session. |
| */ |
| guac_parser* parser; |
| |
| /** |
| * A reference to the connected user. |
| */ |
| guac_user* user; |
| |
| /** |
| * The number of microseconds to wait for instructions from a connected |
| * user before closing the connection with an error. |
| */ |
| int usec_timeout; |
| |
| } guac_user_input_thread_params; |
| |
| /** |
| * Prints an error message using the logging facilities of the given user, |
| * automatically including any information present in guac_error. |
| * |
| * @param user |
| * The guac_user associated with the error that occurred. |
| * |
| * @param level |
| * The level at which to log this message. |
| * |
| * @param message |
| * The message to log. |
| */ |
| static void guac_user_log_guac_error(guac_user* user, |
| guac_client_log_level level, const char* message) { |
| |
| if (guac_error != GUAC_STATUS_SUCCESS) { |
| |
| /* If error message provided, include in log */ |
| if (guac_error_message != NULL) |
| guac_user_log(user, level, "%s: %s", message, |
| guac_error_message); |
| |
| /* Otherwise just log with standard status string */ |
| else |
| guac_user_log(user, level, "%s: %s", message, |
| guac_status_string(guac_error)); |
| |
| } |
| |
| /* Just log message if no status code */ |
| else |
| guac_user_log(user, level, "%s", message); |
| |
| } |
| |
| /** |
| * Logs a reasonable explanatory message regarding handshake failure based on |
| * the current value of guac_error. |
| * |
| * @param user |
| * The guac_user associated with the failed Guacamole protocol handshake. |
| */ |
| static void guac_user_log_handshake_failure(guac_user* user) { |
| |
| if (guac_error == GUAC_STATUS_CLOSED) |
| guac_user_log(user, GUAC_LOG_INFO, |
| "Guacamole connection closed during handshake"); |
| else if (guac_error == GUAC_STATUS_PROTOCOL_ERROR) |
| guac_user_log(user, GUAC_LOG_ERROR, |
| "Guacamole protocol violation. Perhaps the version of " |
| "guacamole-client is incompatible with this version of " |
| "libguac?"); |
| else |
| guac_user_log(user, GUAC_LOG_WARNING, |
| "Guacamole handshake failed: %s", |
| guac_status_string(guac_error)); |
| |
| } |
| |
| /** |
| * The thread which handles all user input, calling event handlers for received |
| * instructions. |
| * |
| * @param data |
| * A pointer to a guac_user_input_thread_params structure describing the |
| * user whose input is being handled and the guac_parser with which to |
| * handle it. |
| * |
| * @return |
| * Always NULL. |
| */ |
| static void* guac_user_input_thread(void* data) { |
| |
| guac_user_input_thread_params* params = |
| (guac_user_input_thread_params*) data; |
| |
| int usec_timeout = params->usec_timeout; |
| guac_user* user = params->user; |
| guac_parser* parser = params->parser; |
| guac_client* client = user->client; |
| guac_socket* socket = user->socket; |
| |
| /* Guacamole user input loop */ |
| while (client->state == GUAC_CLIENT_RUNNING && user->active) { |
| |
| /* Read instruction, stop on error */ |
| if (guac_parser_read(parser, socket, usec_timeout)) { |
| |
| if (guac_error == GUAC_STATUS_TIMEOUT) |
| guac_user_abort(user, GUAC_PROTOCOL_STATUS_CLIENT_TIMEOUT, "User is not responding."); |
| |
| else { |
| if (guac_error != GUAC_STATUS_CLOSED) |
| guac_user_log_guac_error(user, GUAC_LOG_WARNING, |
| "Guacamole connection failure"); |
| guac_user_stop(user); |
| } |
| |
| return NULL; |
| } |
| |
| /* Reset guac_error and guac_error_message (user/client handlers are not |
| * guaranteed to set these) */ |
| guac_error = GUAC_STATUS_SUCCESS; |
| guac_error_message = NULL; |
| |
| /* Call handler, stop on error */ |
| if (__guac_user_call_opcode_handler(__guac_instruction_handler_map, |
| user, parser->opcode, parser->argc, parser->argv)) { |
| |
| /* Log error */ |
| guac_user_log_guac_error(user, GUAC_LOG_WARNING, |
| "User connection aborted"); |
| |
| /* Log handler details */ |
| guac_user_log(user, GUAC_LOG_DEBUG, "Failing instruction handler in user was \"%s\"", parser->opcode); |
| |
| guac_user_stop(user); |
| return NULL; |
| } |
| |
| } |
| |
| return NULL; |
| |
| } |
| |
| /** |
| * Starts the input/output threads of a new user. This function will block |
| * until the user disconnects. If an error prevents the input/output threads |
| * from starting, guac_user_stop() will be invoked on the given user. |
| * |
| * @param parser |
| * The guac_parser to use to handle all input from the given user. |
| * |
| * @param user |
| * The user whose associated I/O transfer threads should be started. |
| * |
| * @param usec_timeout |
| * The number of microseconds to wait for instructions from the given |
| * user before closing the connection with an error. |
| * |
| * @return |
| * Zero if the I/O threads started successfully and user has disconnected, |
| * or non-zero if the I/O threads could not be started. |
| */ |
| static int guac_user_start(guac_parser* parser, guac_user* user, |
| int usec_timeout) { |
| |
| guac_user_input_thread_params params = { |
| .parser = parser, |
| .user = user, |
| .usec_timeout = usec_timeout |
| }; |
| |
| pthread_t input_thread; |
| |
| if (pthread_create(&input_thread, NULL, guac_user_input_thread, (void*) ¶ms)) { |
| guac_user_log(user, GUAC_LOG_ERROR, "Unable to start input thread"); |
| guac_user_stop(user); |
| return -1; |
| } |
| |
| /* Wait for I/O threads */ |
| pthread_join(input_thread, NULL); |
| |
| /* Explicitly signal disconnect */ |
| guac_protocol_send_disconnect(user->socket); |
| guac_socket_flush(user->socket); |
| |
| /* Done */ |
| return 0; |
| |
| } |
| |
| /** |
| * This function loops through the received instructions during the handshake |
| * with the client attempting to join the connection, and runs the handlers |
| * for each of the opcodes, ending when the connect instruction is received. |
| * Returns zero if the handshake completes successfully with the connect opcode, |
| * or a non-zero value if an error occurs. |
| * |
| * @param user |
| * The guac_user attempting to join the connection. |
| * |
| * @param parser |
| * The parser used to examine the received data. |
| * |
| * @param usec_timeout |
| * The timeout, in microseconds, for reading the instructions. |
| * |
| * @return |
| * Zero if the handshake completes successfully with the connect opcode, |
| * or non-zero if an error occurs. |
| */ |
| static int __guac_user_handshake(guac_user* user, guac_parser* parser, |
| int usec_timeout) { |
| |
| guac_socket* socket = user->socket; |
| |
| /* Handle each of the opcodes. */ |
| while (guac_parser_read(parser, socket, usec_timeout) == 0) { |
| |
| /* If we receive the connect opcode, we're done. */ |
| if (strcmp(parser->opcode, "connect") == 0) |
| return 0; |
| |
| guac_user_log(user, GUAC_LOG_DEBUG, "Processing instruction: %s", |
| parser->opcode); |
| |
| /* Run instruction handler for opcode with arguments. */ |
| if (__guac_user_call_opcode_handler(__guac_handshake_handler_map, user, |
| parser->opcode, parser->argc, parser->argv)) { |
| |
| guac_user_log_handshake_failure(user); |
| guac_user_log_guac_error(user, GUAC_LOG_DEBUG, |
| "Error handling instruction during handshake."); |
| guac_user_log(user, GUAC_LOG_DEBUG, "Failed opcode: %s", |
| parser->opcode); |
| |
| guac_parser_free(parser); |
| return 1; |
| |
| } |
| |
| } |
| |
| /* If we get here it's because we never got the connect instruction. */ |
| guac_user_log(user, GUAC_LOG_ERROR, |
| "Handshake failed, \"connect\" instruction was not received."); |
| return 1; |
| } |
| |
| int guac_user_handle_connection(guac_user* user, int usec_timeout) { |
| |
| guac_socket* socket = user->socket; |
| guac_client* client = user->client; |
| |
| user->info.audio_mimetypes = NULL; |
| user->info.image_mimetypes = NULL; |
| user->info.video_mimetypes = NULL; |
| user->info.timezone = NULL; |
| |
| /* Count number of arguments. */ |
| int num_args; |
| for (num_args = 0; client->args[num_args] != NULL; num_args++); |
| |
| /* Send args */ |
| if (guac_protocol_send_args(socket, client->args) |
| || guac_socket_flush(socket)) { |
| |
| /* Log error */ |
| guac_user_log_handshake_failure(user); |
| guac_user_log_guac_error(user, GUAC_LOG_DEBUG, |
| "Error sending \"args\" to new user"); |
| |
| return 1; |
| } |
| |
| guac_parser* parser = guac_parser_alloc(); |
| |
| /* Perform the handshake with the client. */ |
| if (__guac_user_handshake(user, parser, usec_timeout)) { |
| guac_parser_free(parser); |
| return 1; |
| } |
| |
| /* Acknowledge connection availability */ |
| guac_protocol_send_ready(socket, client->connection_id); |
| guac_socket_flush(socket); |
| |
| /* Verify argument count. */ |
| if (parser->argc != (num_args + 1)) { |
| guac_client_log(client, GUAC_LOG_ERROR, "Client did not return the " |
| "expected number of arguments."); |
| return 1; |
| } |
| |
| /* Attempt to join user to connection. */ |
| if (guac_client_add_user(client, user, (parser->argc - 1), parser->argv + 1)) |
| guac_client_log(client, GUAC_LOG_ERROR, "User \"%s\" could NOT " |
| "join connection \"%s\"", user->user_id, client->connection_id); |
| |
| /* Begin user connection if join successful */ |
| else { |
| |
| guac_client_log(client, GUAC_LOG_INFO, "User \"%s\" joined connection " |
| "\"%s\" (%i users now present)", user->user_id, |
| client->connection_id, client->connected_users); |
| if (strcmp(parser->argv[0],"") != 0) |
| guac_client_log(client, GUAC_LOG_DEBUG, "Client is using protocol " |
| "version \"%s\"", parser->argv[0]); |
| else |
| guac_client_log(client, GUAC_LOG_DEBUG, "Client has not defined " |
| "its protocol version."); |
| |
| /* Handle user I/O, wait for connection to terminate */ |
| guac_user_start(parser, user, usec_timeout); |
| |
| /* Remove/free user */ |
| guac_client_remove_user(client, user); |
| guac_client_log(client, GUAC_LOG_INFO, "User \"%s\" disconnected (%i " |
| "users remain)", user->user_id, client->connected_users); |
| |
| } |
| |
| /* Free mimetype character arrays. */ |
| guac_free_mimetypes((char **) user->info.audio_mimetypes); |
| guac_free_mimetypes((char **) user->info.image_mimetypes); |
| guac_free_mimetypes((char **) user->info.video_mimetypes); |
| |
| /* Free timezone info. */ |
| free((char *) user->info.timezone); |
| |
| guac_parser_free(parser); |
| |
| /* Successful disconnect */ |
| return 0; |
| |
| } |
| |