| /* |
| * Licensed to the Apache Software Foundation (ASF) under one or more contributor license |
| * agreements. See the NOTICE file distributed with this work for additional information regarding |
| * copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance with the License. You may obtain a |
| * copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software distributed under the License |
| * is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express |
| * or implied. See the License for the specific language governing permissions and limitations under |
| * the License. |
| */ |
| |
| package org.apache.geode.distributed; |
| |
| import org.apache.geode.distributed.internal.membership.api.MembershipConfig; |
| |
| /** |
| * This interface defines all the configuration properties that can be used. <U>Since</U>: Geode 1.0 |
| */ |
| public interface ConfigurationProperties { |
| |
| /** |
| * The static string definition of the <i>"ack-severe-alert-threshold"</i> property |
| * <a name="ack-severe-alert-threshold"/> |
| * <p> |
| * <U>Description</U>: The number of seconds the distributed system will wait after the |
| * ack-wait-threshold for a message to be acknowledged before it issues an alert at <i>severe</i> |
| * level. The default value is zero, which turns off this feature. When ack-severe-alert-threshold |
| * is used, GemFire will also initiate additional checks to see if the process is alive. These |
| * checks will begin when the ack-wait-threshold is reached and will continue until GemFire has |
| * been able to communicate with the process and ascertain its status. |
| * <p> |
| * <U>Default</U>: "0" |
| * <p> |
| * <U>Allowed values</U>: 0..2147483647 |
| */ |
| String ACK_SEVERE_ALERT_THRESHOLD = "ack-severe-alert-threshold"; |
| /** |
| * The static String definition of the <i>"ack-wait-threshold"</i> property <a |
| * name="ack-wait-threshold"/a> |
| * </p> |
| * <U>Description</U>: The number of seconds the distributed system will wait for a message to be |
| * acknowledged before it sends a <i>warning</i> level alert to signal that something might be |
| * wrong with the system node that is unresponsive. After sending this alert the waiter continues |
| * to wait. The alerts are logged in the log as warnings and will cause an alert notification in |
| * the Admin API and GemFire JMX Agent. |
| * </p> |
| * <U>Default</U>: "15" |
| * </p> |
| * <U>Allowed values</U>: 1..2147483647 |
| */ |
| String ACK_WAIT_THRESHOLD = "ack-wait-threshold"; |
| /** |
| * The static String definition of the <i>"archive-disk-space-limit"</i> property <a |
| * name="archive-disk-space-limit"/a> |
| * </p> |
| * <U>Description</U>: Limits, in megabytes, how much disk space can be consumed by old inactive |
| * statistic archive files. When the limit is exceeded the oldest inactive archive is deleted. Set |
| * to zero to disable automatic archive deletion. |
| * </p> |
| * <U>Default</U>: "0" |
| * </p> |
| * <U>Allowed values</U>: 0..1000000 |
| */ |
| String ARCHIVE_DISK_SPACE_LIMIT = "archive-disk-space-limit"; |
| /** |
| * The static String definition of the <i>"archive-file-size-limit"</i> property <a |
| * name="archive-file-size-limit"/a> |
| * </p> |
| * <U>Description</U>: Limits, in megabytes, how large the current statistic archive file can grow |
| * before it is closed and archival rolls on to a new file. Set to zero to disable archive |
| * rolling. |
| * </p> |
| * <U>Default</U>: "0" |
| * </p> |
| * <U>Allowed values</U>: 0..1000000 |
| */ |
| String ARCHIVE_FILE_SIZE_LIMIT = "archive-file-size-limit"; |
| /** |
| * The static String definition of the <i>"async-distribution-timeout"</i> property <a |
| * name="async-distribution-timeout"/a> |
| * </p> |
| * <U>Description</U>: The number of milliseconds before a publishing process should attempt to |
| * distribute a cache operation before switching over to asynchronous messaging for this process. |
| * To enable asynchronous messaging, the value must be set above zero. If a thread that is |
| * publishing to the cache exceeds this value when attempting to distribute to this process, it |
| * will switch to asynchronous messaging until this process catches up, departs, or some specified |
| * limit is reached, such as <a href="#async-queue-timeout"> async-queue-timeout</a> or |
| * <a href="#async-max-queue-size"> async-max-queue-size</a>. |
| * </p> |
| * <U>Default</U>: "0" |
| * </p> |
| * <U>Allowed values</U>: 0..60000 |
| */ |
| String ASYNC_DISTRIBUTION_TIMEOUT = "async-distribution-timeout"; |
| /** |
| * The static String definition of the <i>"async-max-queue-size"</i> property <a |
| * name="async-max-queue-size"/a> |
| * </p> |
| * <U>Description</U>: The maximum size in megabytes that a publishing process should be allowed |
| * to asynchronously enqueue for this process before asking this process to depart from the |
| * distributed system. |
| * </p> |
| * <U>Default</U>: "8" |
| * </p> |
| * <U>Allowed values</U>: 0..1024 |
| */ |
| String ASYNC_MAX_QUEUE_SIZE = "async-max-queue-size"; |
| /** |
| * The static String definition of the <i>"async-queue-timeout"</i> property <a |
| * name="async-queue-timeout"/a> |
| * </p> |
| * <U>Description</U>: The number of milliseconds a queuing publisher may enqueue asynchronous |
| * messages without any distribution to this process before that publisher requests this process |
| * to depart. If a queuing publisher has not been able to send this process any cache operations |
| * prior to the timeout, this process will attempt to close its cache and disconnect from the |
| * distributed system. |
| * </p> |
| * <U>Default</U>: "60000" |
| * </p> |
| * <U>Allowed values</U>: 0..86400000 |
| */ |
| String ASYNC_QUEUE_TIMEOUT = "async-queue-timeout"; |
| /** |
| * The static String definition of the <i>"bind-address"</i> property <a name="bind-address"/a> |
| * <p> |
| * <U>Description</U>: The IP address that this distributed system's server sockets will listen |
| * on. If set to an empty string then the local machine's default address will be listened on. |
| * <p> |
| * <U>Default</U>: "" |
| */ |
| String BIND_ADDRESS = "bind-address"; |
| /** |
| * The static String definition of the <i>"cache-xml-file"</i> property <a |
| * name="cache-xml-file"/a> |
| * </p> |
| * <U>Description</U>: Specifies the name of the XML file or resource to initialize the cache with |
| * when it is {@linkplain org.apache.geode.cache.CacheFactory#create created}. Create will first |
| * look for a file that matches the value of this property. If a file is not found then it will be |
| * searched for using {@link java.lang.ClassLoader#getResource}. If the value of this property is |
| * the empty string (<code>""</code>), then the cache will not be declaratively initialized. |
| * </p> |
| * <U>Default</U>: "cache.xml" |
| */ |
| String CACHE_XML_FILE = "cache-xml-file"; |
| /** |
| * The static String definition of the <i>"cluster-configuration-dir"</i> property <a |
| * name="cluster-configuration-dir"/a> |
| * </p> |
| * <U>Description</U>: This property specifies the directory in which the cluster configuration |
| * related disk-store and artifacts are stored This property is only applicable to dedicated |
| * locators which have "enable-cluster-configuration" set to true. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| */ |
| String CLUSTER_CONFIGURATION_DIR = "cluster-configuration-dir"; |
| |
| /** |
| * The static String definition of the cluster ssl prefix <i>"cluster-ssl"</i> used in conjunction |
| * with other <i>cluster-ssl-*</i> properties property <a name="cluster-ssl"/a> |
| * </p> |
| * <U>Description</U>: The cluster-ssl property prefix |
| * |
| * @deprecated Since Geode1.0, use ssl-* properties and ssl-enabled-components |
| */ |
| @Deprecated |
| String CLUSTER_SSL_PREFIX = "cluster-ssl"; |
| |
| /** |
| * The static String definition of the <i>"ssl-cluster-alias"</i> property <a |
| * name="ssl-cluster-alias"/a> |
| * </p> |
| * <U>Description</U>: This property is to be used if a specific key is to be used out of a |
| * keystore for the cluster ssl certificate. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_CLUSTER_ALIAS = "ssl-cluster-alias"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-ciphers"</i> property <a |
| * name="cluster-ssl-ciphers"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL cipher suites to enable. Those listed |
| * must be supported by the available providers.Preferably use cluster-ssl-* properties rather |
| * than ssl-* properties. |
| * </p> |
| * <U>Default</U>: "any" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_CIPHERS} |
| */ |
| String CLUSTER_SSL_CIPHERS = "cluster-ssl-ciphers"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-enabled"</i> property <a |
| * name="cluster-ssl-enabled"/a> |
| * </p> |
| * <U>Description</U>: If true, all gemfire socket communication is configured to use SSL through |
| * JSSE. |
| * </p> |
| * <U>Default</U>: "false" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 see {@link #SSL_ENABLED_COMPONENTS} |
| */ |
| String CLUSTER_SSL_ENABLED = "cluster-ssl-enabled"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-keystore"</i> property <a |
| * name="cluster-ssl-keystore"/a> |
| * </p> |
| * <U>Description</U>Location of the Java keystore file containing certificate and private key. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE} |
| */ |
| String CLUSTER_SSL_KEYSTORE = "cluster-ssl-keystore"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-keystore-password"</i> property <a |
| * name="cluster-ssl-keystore-password"/a> |
| * </p> |
| * <U>Description</U>Password to access the private key from the keystore file specified by |
| * javax.net.ssl.keyStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_PASSWORD} |
| */ |
| String CLUSTER_SSL_KEYSTORE_PASSWORD = "cluster-ssl-keystore-password"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-keystore-type"</i> property <a |
| * name="cluster-ssl-keystore-type"/a> |
| * </p> |
| * <U>Description</U>For Java keystore file format, this property has the value jks (or JKS). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_TYPE} |
| */ |
| String CLUSTER_SSL_KEYSTORE_TYPE = "cluster-ssl-keystore-type"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-protocols"</i> property <a |
| * name="cluster-ssl-protocols"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL protocols to enable. Those listed must be |
| * supported by the available providers. |
| * </p> |
| * <U>Default</U>: "any" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_PROTOCOLS} |
| */ |
| String CLUSTER_SSL_PROTOCOLS = "cluster-ssl-protocols"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-require-authentication"</i> property <a |
| * name="cluster-ssl-require-authentication"/a> |
| * </p> |
| * <U>Description</U>: If false, allow ciphers that do not require the client side of the |
| * connection to be authenticated. |
| * </p> |
| * <U>Default</U>: "true" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_REQUIRE_AUTHENTICATION} |
| */ |
| String CLUSTER_SSL_REQUIRE_AUTHENTICATION = "cluster-ssl-require-authentication"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-truststore"</i> property <a |
| * name="cluster-ssl-truststore"/a> |
| * </p> |
| * <U>Description</U>Location of the Java keystore file containing the collection of CA |
| * certificates trusted by distributed member (trust store). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE} |
| */ |
| String CLUSTER_SSL_TRUSTSTORE = "cluster-ssl-truststore"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-truststore-password"</i> property <a |
| * name="cluster-ssl-truststore-password"/a> |
| * </p> |
| * <U>Description</U>Password to unlock the keystore file (store password) specified by |
| * javax.net.ssl.trustStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE_PASSWORD} |
| */ |
| String CLUSTER_SSL_TRUSTSTORE_PASSWORD = "cluster-ssl-truststore-password"; |
| /** |
| * The static String definition of the <i>"conflate-events"</i> property <a |
| * name="conflate-events"/a> |
| * </p> |
| * <U>Description</U>: This is a client-side property that is passed to the server. Allowable |
| * values are "server", "true", and "false". With the "server" setting, this client's servers |
| * use their own client queue conflation settings. With a "true" setting, the servers disregard |
| * their own configuration and enable conflation of events for all regions for the client. A |
| * "false" setting causes the client's servers to disable conflation for all regions for the |
| * client. <U>Default</U>: "server" |
| * </p> |
| * <U>Since</U>: GemFire 5.7 |
| */ |
| String CONFLATE_EVENTS = "conflate-events"; |
| /** |
| * The static String definition of the <i>"conserve-sockets"</i> property <a |
| * name="conserve-sockets"/a> |
| * </p> |
| * <U>Description</U>: If "true" then a minimal number of sockets will be used when connecting to |
| * the distributed system. This conserves resource usage but can cause performance to suffer. If |
| * "false" then every application thread that sends distribution messages to other members of the |
| * distributed system will own its own sockets and have exclusive access to them. The length of |
| * time a thread can have exclusive access to a socket can be configured with "socket-lease-time". |
| * <U>Default</U>: "true" |
| * </p> |
| * <U>Allowed values</U>: true|false |
| * </p> |
| */ |
| String CONSERVE_SOCKETS = "conserve-sockets"; |
| /** |
| * The static String definition of the <i>"delta-propagation"</i> property |
| * <a name="delta-propagation"> |
| * <dt>delta-propagation</dt> </a> <U>Description</U>: "true" indicates that server propagates |
| * delta generated from {@link org.apache.geode.Delta} type of objects. If "false" then server |
| * propagates full object but not delta. |
| * </p> |
| * <U>Default</U>: "true" |
| * </p> |
| * <U>Allowed values</U>: true|false |
| */ |
| String DELTA_PROPAGATION = "delta-propagation"; |
| /** |
| * The static String definition of the <i>"deploy-working-dir"</i> property <a |
| * name="deploy-working-dir"/a> |
| * </p> |
| * <U>Description</U>: Specifies the working directory which this distributed member will use to |
| * persist deployed JAR files. This directory should be unchanged when restarting the member so |
| * that it can read what was previously persisted. The default is the current working directory as |
| * determined by <code>System.getProperty("user.dir")</code>. |
| * </p> |
| * <U>Default</U>: <code>System.getProperty("user.dir")</code> |
| * </p> |
| * <U>Since</U>: GemFire 7.0 |
| */ |
| String DEPLOY_WORKING_DIR = "deploy-working-dir"; |
| /** |
| * The static String definition of the <i>"disable-auto-reconnect"</i> property <a |
| * name="disable-auto-reconnect"/a> |
| * </p> |
| * <U>Description</U>: By default GemFire will attempt to reconnect and reinitialize the cache |
| * when it has been forced out of the distributed system by a network-partition event or has |
| * otherwise been shunned by other members. This setting will turn off this behavior. |
| * </p> |
| * <U>Default</U>: "false" |
| */ |
| String DISABLE_AUTO_RECONNECT = "disable-auto-reconnect"; |
| /** |
| * The static String definition of the <i>"disable-tcp"</i> property <a name="disable-tcp"/a> |
| * <p> |
| * <U>Description</U>: Turns off use of tcp/ip sockets, forcing the cache to use datagram sockets |
| * for all communication. This is useful if you have a large number of processes in the |
| * distributed cache since it eliminates the per-connection reader-thread that is otherwise |
| * required. However, udp communications are somewhat slower than tcp/ip communications due to the |
| * extra work required in Java to break messages down to transmittable sizes, and the extra work |
| * required to guarantee message delivery. |
| * <p> |
| * <U>Default</U>: "false" |
| * <p> |
| * <U>Allowed values</U>: true or false |
| * <p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String DISABLE_TCP = "disable-tcp"; |
| /** |
| * The static String definition of the <i>"disable-jmx"</i> property <a name="disable-tcp"/a> |
| * <p> |
| * <U>Description</U>: Turns off use of JMX, preventing the process from creating Geode MBeans. |
| * <p> |
| * <U>Default</U>: "false" |
| * <p> |
| * <U>Allowed values</U>: true or false |
| * <p> |
| * <U>Since</U>: Geode 1.9 |
| */ |
| String DISABLE_JMX = "disable-jmx"; |
| /** |
| * The static String definition of the <i>"distributed-system-id"</i> property |
| * <p> |
| * <a name="distributed-system-id"/a> <U>Decription:</U>A number that uniquely identifies this |
| * distributed system, when using the WAN gateway to share data between multiple distributed |
| * systems. This setting is only required when using the WAN gateway in conjunction with the |
| * <b>P</b>ortable <b>D</b>ata e<b>X</b>change (PDX) serialization format. |
| * <p> |
| * If set, this setting must be the same for every member in this distributed system. It must be |
| * different than the number in other distributed systems that this one will connect to using the |
| * WAN. -1 means no setting. |
| * <p> |
| * <U>Range:</U>-1..255 |
| * <p> |
| * <U>Default:</U>: "-1" |
| */ |
| String DISTRIBUTED_SYSTEM_ID = "distributed-system-id"; |
| /** |
| * The static String definition of the <i>"durable-client-id"</i> property <a |
| * name="durable-client-id"/a> |
| * </p> |
| * <U>Description</U>: The id to be used by this durable client. When a durable client connects to |
| * a server, this id is used by the server to identify it. The server will accumulate updates for |
| * a durable client while it is disconnected and deliver these events to the client when it |
| * reconnects. <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 5.5 |
| */ |
| String DURABLE_CLIENT_ID = "durable-client-id"; |
| /** |
| * The static String definition of the <i>"durable-client-timeout"</i> property <a |
| * name="durable-client-timeout"/a> |
| * </p> |
| * <U>Description</U>: The number of seconds a disconnected durable client is kept alive and |
| * updates are accumulated for it by the server before it is terminated. <U>Default</U>: "300" |
| * </p> |
| * <U>Since</U>: GemFire 5.5 |
| */ |
| String DURABLE_CLIENT_TIMEOUT = "durable-client-timeout"; |
| /** |
| * The static String definition of the <i>"enable-cluster-configuration"</i> property <a |
| * name="enable-cluster-configuration"/a> |
| * </p> |
| * <U>Description</U>: "true" causes creation of cluster configuration service on dedicated |
| * locators. The cluster configuration service on dedicated locator(s) would serve the |
| * configuration to new members joining the distributed system and also save the configuration |
| * changes caused by the Gfsh commands. This property is only applicable to dedicated locators. |
| * </p> |
| * <U>Default</U>: "true" |
| * </p> |
| * <U>Allowed values</U>: true or false |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| */ |
| String ENABLE_CLUSTER_CONFIGURATION = "enable-cluster-configuration"; |
| |
| /** |
| * The static String definition of the <i>"enable-management-rest-service"</i> property <a |
| * name="enable-management-rest-service"/a> |
| * </p> |
| * <U>Description</U>: "true" causes the cluster management rest service to be enabled. This |
| * service |
| * requires the cluster configuration service to be enabled. If "enable-cluster-configuration" is |
| * false and this is true, the management rest service would do nothing but report an error if you |
| * try to use it. Also even if this property is set to "true", The management rest service will |
| * only be started if "http-service-port" is not "0". |
| * </p> |
| * <U>Default</U>: "true" |
| * </p> |
| * <U>Allowed values</U>: true or false |
| * </p> |
| * <U>Since</U>: Geode 1.10 |
| */ |
| String ENABLE_MANAGEMENT_REST_SERVICE = "enable-management-rest-service"; |
| |
| /** |
| * The static String definition of the <i>"enable-network-partition-detection"</i> property <a |
| * name="enable-network-partition-detection"/a> |
| * </p> |
| * <U>Description</U>: Turns on network partitioning detection algorithms, which detect loss of |
| * quorum and shuts down losing partitions. |
| * </p> |
| * <U>Default</U>: "true" |
| */ |
| String ENABLE_NETWORK_PARTITION_DETECTION = "enable-network-partition-detection"; |
| /** |
| * The static String definition of the <i>"enable-time-statistics"</i> property <a |
| * name="enable-time-statistics"/a> |
| * </p> |
| * <U>Description</U>: "true" causes additional time-based statistics to be gathered for gemfire |
| * operations. This can aid in discovering where time is going in cache operations, albeit at the |
| * expense of extra clock probes on every operation. "false" disables the additional time-based |
| * statistics. |
| * </p> |
| * <U>Default</U>: "false" |
| * </p> |
| * <U>Allowed values</U>: true or false |
| * </p> |
| * <U>Since</U>: 5.0 |
| */ |
| String ENABLE_TIME_STATISTICS = "enable-time-statistics"; |
| /** |
| * The static String definition of the <i>"enforce-unique-host"</i> property <a |
| * name="enforce-unique-host"/a> |
| * </p> |
| * <U>Description</U>: Whether or not partitioned regions will put redundant copies of the same |
| * data in different JVMs running on the same physical host. |
| * <p> |
| * By default, partitioned regions will try to put redundancy copies on different physical hosts, |
| * but it may put them on the same physical host if no other hosts are available. Setting this |
| * property to true will prevent partitions regions from ever putting redundant copies of data on |
| * the same physical host. |
| * </p> |
| * <U>Default</U>: "false" |
| */ |
| String ENFORCE_UNIQUE_HOST = "enforce-unique-host"; |
| /** |
| * The static String definition of the <i>"ssl-gateway-alias"</i> property <a |
| * name="ssl-gateway-alias"/a> |
| * </p> |
| * <U>Description</U>: This property is to be used if a specific key is to be used for the SSL |
| * communications for the Gateways. |
| * </p> |
| * <U><i>Optional</i></U> <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_GATEWAY_ALIAS = "ssl-gateway-alias"; |
| /** |
| * The static String definition of the <i>"gateway-ssl-ciphers"</i> property <a |
| * name="gateway-ssl-ciphers"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL cipher suites to enable. Those listed |
| * must be supported by the available providers. |
| * </p> |
| * <U>Default</U>: <code>any</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_CIPHERS} |
| */ |
| @Deprecated |
| String GATEWAY_SSL_CIPHERS = "gateway-ssl-ciphers"; |
| /** |
| * The static String definition of the <i>"gateway-ssl-enabled"</i> property <a |
| * name="gateway-ssl-enabled"/a> |
| * </p> |
| * <U>Description</U>: Specifies if gateway is started with separate ssl configuration. If not |
| * specified global property ssl-enabled (and its other related properties) are used to create |
| * gateway socket |
| * </p> |
| * <U>Default</U>: <code>false</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_ENABLED_COMPONENTS} with the optional |
| * {@link #SSL_GATEWAY_ALIAS} |
| */ |
| @Deprecated |
| String GATEWAY_SSL_ENABLED = "gateway-ssl-enabled"; |
| /** |
| * The static String definition of the <i>"gateway-ssl-keystore"</i> property <a |
| * name="gateway-ssl-keystore"/a> |
| * </p> |
| * <U>Description</U>Location of the Java keystore file containing certificate and private key. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE} |
| */ |
| @Deprecated |
| String GATEWAY_SSL_KEYSTORE = "gateway-ssl-keystore"; |
| /** |
| * The static String definition of the <i>"gateway-ssl-keystore-password"</i> property <a |
| * name="gateway-ssl-keystore-password"/a> |
| * </p> |
| * <U>Description</U>Password to access the private key from the keystore file specified by |
| * javax.net.ssl.keyStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_PASSWORD} |
| */ |
| @Deprecated |
| String GATEWAY_SSL_KEYSTORE_PASSWORD = "gateway-ssl-keystore-password"; |
| /** |
| * The static String definition of the <i>"gateway-ssl-keystore-type"</i> property <a |
| * name="gateway-ssl-keystore-type"/a> |
| * </p> |
| * <U>Description</U>For Java keystore file format, this property has the value jks (or JKS). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_TYPE} |
| */ |
| @Deprecated |
| String GATEWAY_SSL_KEYSTORE_TYPE = "gateway-ssl-keystore-type"; |
| /** |
| * The static String definition of the <i>"gateway-ssl-protocols"</i> property <a |
| * name="gateway-ssl-protocols"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL protocols to enable. Those listed must be |
| * supported by the available providers. |
| * </p> |
| * <U>Default</U>: <code>any</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_PROTOCOLS} |
| */ |
| @Deprecated |
| String GATEWAY_SSL_PROTOCOLS = "gateway-ssl-protocols"; |
| /** |
| * The static String definition of the <i>"gateway-ssl-require-authentication"</i> property <a |
| * name="gateway-ssl-require-authentication"/a> |
| * </p> |
| * <U>Description</U>: If false, allow ciphers that do not require the Gateway Sender side of the |
| * connection to be authenticated. |
| * </p> |
| * <U>Default</U>: <code>any</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_REQUIRE_AUTHENTICATION} |
| */ |
| @Deprecated |
| String GATEWAY_SSL_REQUIRE_AUTHENTICATION = "gateway-ssl-require-authentication"; |
| /** |
| * The static String definition of the <i>"gateway-ssl-truststore"</i> property <a |
| * name="gateway-ssl-truststore"/a> |
| * </p> |
| * <U>Description</U>Location of the Java keystore file containing the collection of CA |
| * certificates trusted by server (trust store). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE} |
| */ |
| @Deprecated |
| String GATEWAY_SSL_TRUSTSTORE = "gateway-ssl-truststore"; |
| /** |
| * The static String definition of the <i>"gateway-ssl-truststore-password"</i> property <a |
| * name="gateway-ssl-truststore-password"/a> |
| * </p> |
| * <U>Description</U>: Password to unlock the keystore file (store password) specified by |
| * javax.net.ssl.trustStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE_PASSWORD} |
| */ |
| @Deprecated |
| String GATEWAY_SSL_TRUSTSTORE_PASSWORD = "gateway-ssl-truststore-password"; |
| /** |
| * The static String definition of the <i>"groups"</i> property. <a name="groups"/a> |
| * <p> |
| * <U>Description</U>: Defines the list of groups this member belongs to. Use commas to separate |
| * group names. Note that anything defined by the deprecated roles gemfire property will also be |
| * considered a group. |
| * <p> |
| * <U>Default</U>: "" |
| * <p> |
| * <U>Since</U>: GemFire 7.0 |
| */ |
| String GROUPS = "groups"; |
| /** |
| * The static String definition of the <i>"http-service-bind-address"</i> property <a |
| * name="http-service-bind-address"/a> |
| * </p> |
| * <U>Description</U>: The address where the GemFire HTTP service will listen for remote |
| * connections. One can use this property to configure what ip address or host name the HTTP |
| * service will listen on. When not set, by default the HTTP service will listen on the local |
| * host's address. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| */ |
| String HTTP_SERVICE_BIND_ADDRESS = "http-service-bind-address"; |
| /** |
| * The static String definition of the <i>"http-service-port"</i> property <a |
| * name="http-service-port"/a> |
| * </p> |
| * <U>Description</U>: Specifies the port used by the GemFire HTTP service. If configured with |
| * non-zero value, then an HTTP service will listen on this port. A value of "0" disables Gemfire |
| * HTTP service. |
| * </p> |
| * <U>Default</U>: "7070" |
| * </p> |
| * <U>Allowed values</U>: 0..65535 |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| */ |
| String HTTP_SERVICE_PORT = "http-service-port"; |
| /** |
| * The static String definition of the <i>"ssl-web-alias"</i> property <a name="ssl-web-alias"/a> |
| * </p> |
| * <U>Description</U>: This property is to be used if a specific key is to be used for the SSL |
| * communications for the HTTP service. |
| * </p> |
| * <U><i>Optional</i></U> <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_WEB_ALIAS = "ssl-web-alias"; |
| |
| |
| @Deprecated |
| String HTTP_SERVICE_SSL_PREFIX = "http-service-ssl-"; |
| |
| /** |
| * The static String definition of the <i>"http-service-ssl-ciphers"</i> property <a |
| * name="http-service-ssl-ciphers"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL cipher suites to enable. Those listed |
| * must be supported by the available providers. |
| * </p> |
| * <U>Default</U>: <code>any</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_CIPHERS} |
| */ |
| @Deprecated |
| String HTTP_SERVICE_SSL_CIPHERS = "http-service-ssl-ciphers"; |
| /** |
| * The static String definition of the <i>"http-service-ssl-enabled"</i> property a |
| * name="http-service-ssl-enabled"/a> |
| * </p> |
| * <U>Description</U>: Specifies if http service is started with separate ssl configuration. If |
| * not specified, global property cluster-ssl-enabled (and its other related properties) are used |
| * to secure http service. All http-service-ssl-* properties are inherited from cluster-ssl-* |
| * properties. User can ovverride them using specific http-service-ssl-* property. |
| * </p> |
| * <U>Default</U>: <code>false</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_ENABLED_COMPONENTS} with optional |
| * {@link #SSL_WEB_ALIAS} |
| */ |
| @Deprecated |
| String HTTP_SERVICE_SSL_ENABLED = "http-service-ssl-enabled"; |
| /** |
| * The static String definition of the <i>"http-service-ssl-keystore"</i> property <a |
| * name="http-service-ssl-keystore"/a> |
| * </p> |
| * <U>Description</U>: Location of the Java keystore file containing certificate and private key. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE} |
| */ |
| @Deprecated |
| String HTTP_SERVICE_SSL_KEYSTORE = "http-service-ssl-keystore"; |
| /** |
| * The static String definition of the <i>"http-service-ssl-keystore-password"</i> property <a |
| * name="http-service-ssl-keystore-password"/a> |
| * </p> |
| * <U>Description</U>: Password to access the private key from the keystore file specified by |
| * javax.net.ssl.keyStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_PASSWORD} |
| */ |
| @Deprecated |
| String HTTP_SERVICE_SSL_KEYSTORE_PASSWORD = "http-service-ssl-keystore-password"; |
| /** |
| * The static String definition of the <i>"http-service-ssl-keystore-type"</i> property <a |
| * name="http-service-ssl-keystore-type"/a> |
| * </p> |
| * <U>Description</U>: For Java keystore file format, this property has the value jks (or JKS). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_TYPE} |
| */ |
| @Deprecated |
| String HTTP_SERVICE_SSL_KEYSTORE_TYPE = "http-service-ssl-keystore-type"; |
| /** |
| * The static String definition of the <i>"http-service-ssl-protocols"</i> property <a |
| * name="http-service-ssl-protocols"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL protocols to enable. Those listed must be |
| * supported by the available providers. |
| * </p> |
| * <U>Default</U>: <code>any</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_PROTOCOLS} |
| */ |
| @Deprecated |
| String HTTP_SERVICE_SSL_PROTOCOLS = "http-service-ssl-protocols"; |
| /** |
| * The static String definition of the <i>"http-service-ssl-require-authentication"</i> property |
| * <a name="http-service-ssl-require-authentication"/a> |
| * </p> |
| * <U>Description</U>: If false, allow ciphers that do not require the client side of the |
| * connection to be authenticated. |
| * </p> |
| * <U>Default</U>: <code>false</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_WEB_SERVICE_REQUIRE_AUTHENTICATION} |
| */ |
| @Deprecated |
| String HTTP_SERVICE_SSL_REQUIRE_AUTHENTICATION = "http-service-ssl-require-authentication"; |
| /** |
| * The static String definition of the <i>"http-service-ssl-truststore"</i> property <a |
| * name="http-service-ssl-truststore"/a> |
| * </p> |
| * <U>Description</U>: Location of the Java keystore file containing the collection of CA |
| * certificates trusted by server (trust store). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE} |
| */ |
| @Deprecated |
| String HTTP_SERVICE_SSL_TRUSTSTORE = "http-service-ssl-truststore"; |
| /** |
| * The static String definition of the <i>"http-service-ssl-truststore-password"</i> property <a |
| * name="http-service-ssl-truststore-password"/a> |
| * </p> |
| * <U>Description</U>: Password to unlock the keystore file (store password) specified by |
| * javax.net.ssl.trustStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.1 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE_PASSWORD} |
| */ |
| @Deprecated |
| String HTTP_SERVICE_SSL_TRUSTSTORE_PASSWORD = "http-service-ssl-truststore-password"; |
| /** |
| * The static String definition of the jmx-manager-ssl prefix "jmx-manager-ssl-" used in |
| * conjunction with other jmx-manager-ssl-* properties</i> property <a name="jmx-manager-ssl-"/a> |
| * </p> |
| * <U>Description</U>: The jmx-manager-ssl prefix for. |
| * </p> |
| * <U>Default</U>: Optional |
| * </p> |
| * |
| * @deprecated Since Geode1.0, use ssl-* properties and ssl-enabled-components |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_PREFIX = "jmx-manager-ssl-"; |
| |
| /** |
| * The static String definition of the <i>"jmx-manager"</i> property <a name="jmx-manager"/a> |
| * </p> |
| * <U>Description</U>: If true then this member is willing to be a jmx-manager. All the other |
| * jmx-manager properties will be used when it does become a manager. If this property is false |
| * then all other jmx-manager properties are ignored. |
| * </p> |
| * <U>Default</U>: "false except on locators" |
| */ |
| String JMX_MANAGER = "jmx-manager"; |
| /** |
| * The static String definition of the <i>"jmx-manager-access-file"</i> property <a |
| * name="jmx-manager-access-file"/a> |
| * </p> |
| * <U>Description</U>: By default the jmx-manager will allow full access to all mbeans by any |
| * client. If this property is set to the name of a file then it can restrict clients to only |
| * being able to read mbeans; they will not be able to modify mbeans. The access level can be |
| * configured differently in this file for each user name defined in the password file. For more |
| * information about the format of this file see Oracle's documentation of the |
| * com.sun.management.jmxremote.access.file system property. Ignored if jmx-manager is false or if |
| * jmx-manager-port is zero. |
| * </p> |
| * <U>Default</U>: "" |
| */ |
| String JMX_MANAGER_ACCESS_FILE = "jmx-manager-access-file"; |
| /** |
| * The static String definition of the <i>"jmx-manager-bind-address"</i> property <a |
| * name="jmx-manager-bind-address"/a> |
| * </p> |
| * <U>Description</U>: By default the jmx-manager when configured with a port will listen on all |
| * the local host's addresses. You can use this property to configure what ip address or host name |
| * the jmx-manager will listen on. In addition, if the embedded http server is started, it will |
| * also bind to this address if it is set. Ignored if jmx-manager is false or jmx-manager-port is |
| * zero. |
| * </p> |
| * <U>Default</U>: "" |
| */ |
| String JMX_MANAGER_BIND_ADDRESS = "jmx-manager-bind-address"; |
| /** |
| * The static String definition of the <i>"jmx-manager-hostname-for-clients"</i> property <a |
| * name="jmx-manager-hostname-for-clients"/a> |
| * </p> |
| * <U>Description</U>: Lets you control what hostname will be given to clients that ask the |
| * locator for the location of a jmx manager. By default the ip address that the jmx-manager |
| * reports is used. But for clients on a different network this property allows you to configure a |
| * different hostname that will be given to clients. Ignored if jmx-manager is false or |
| * jmx-manager-port is zero. |
| * </p> |
| * <U>Default</U>: "" |
| */ |
| String JMX_MANAGER_HOSTNAME_FOR_CLIENTS = "jmx-manager-hostname-for-clients"; |
| /** |
| * The static String definition of the <i>"jmx-manager-http-port"</i> property <a |
| * name="jmx-manager-http-port"/a> |
| * </p> |
| * <U>Description</U>: If non-zero then when the jmx manager is started, an embedded web server |
| * will also be started and will listen on this port. The web server is used to host the GemFire |
| * Pulse application. If you are hosting the Pulse web app in your own web server, then disable |
| * this embedded server by setting this property to zero. Ignored if jmx-manager is false. |
| * </p> |
| * <U>Default</U>: "7070" |
| * </p> |
| * <U>Deprecated</U>: as of GemFire8.0 use |
| * <a href="#http-service-port"><code>http-service-port</code></a> instead. |
| * |
| * @deprecated as of GemFire 8.0 use {@link #HTTP_SERVICE_PORT} instead. |
| */ |
| String JMX_MANAGER_HTTP_PORT = "jmx-manager-http-port"; |
| /** |
| * The static String definition of the <i>"jmx-manager-password-file"</i> property <a |
| * name="jmx-manager-password-file"/a> |
| * </p> |
| * <U>Description</U>: By default the jmx-manager will allow clients without credentials to |
| * connect. If this property is set to the name of a file then only clients that connect with |
| * credentials that match an entry in this file will be allowed. Most JVMs require that the file |
| * is only readable by the owner. For more information about the format of this file see Oracle's |
| * documentation of the com.sun.management.jmxremote.password.file system property. Ignored if |
| * jmx-manager is false or if jmx-manager-port is zero. |
| * </p> |
| * <U>Default</U>: "" |
| */ |
| String JMX_MANAGER_PASSWORD_FILE = "jmx-manager-password-file"; |
| /** |
| * The static String definition of the <i>"jmx-manager-port"</i> property <a |
| * name="jmx-manager-port"/a> |
| * </p> |
| * <U>Description</U>: The port this jmx manager will listen to for client connections. If this |
| * property is set to zero then GemFire will not allow remote client connections but you can |
| * alternatively use the standard system properties supported by the JVM for configuring access |
| * from remote JMX clients. Ignored if jmx-manager is false. |
| * </p> |
| * <U>Default</U>: "1099" |
| */ |
| String JMX_MANAGER_PORT = "jmx-manager-port"; |
| /** |
| * The static String definition of the <i>"jmx-manager-start"</i> property <a |
| * name="jmx-manager-start"/a> |
| * </p> |
| * <U>Description</U>: If true then this member will start a jmx manager when it creates a cache. |
| * Management tools like gfsh can be configured to connect to the jmx-manager. In most cases you |
| * should not set this because a jmx manager will automatically be started when needed on a member |
| * that sets "jmx-manager" to true. Ignored if jmx-manager is false. |
| * </p> |
| * <U>Default</U>: "false" |
| */ |
| String JMX_MANAGER_START = "jmx-manager-start"; |
| /** |
| * The static String definition of the <i>"jmx-manager-update-rate"</i> property <a |
| * name="jmx-manager-update-rate"/a> |
| * </p> |
| * <U>Description</U>: The rate, in milliseconds, at which this member will push updates to any |
| * jmx managers. Currently this value should be greater than or equal to the |
| * statistic-sample-rate. Setting this value too high will cause stale values to be seen by gfsh |
| * and pulse. |
| * </p> |
| * <U>Default</U>: "2000" |
| */ |
| String JMX_MANAGER_UPDATE_RATE = "jmx-manager-update-rate"; |
| /** |
| * The static String definition of the <i>"ssl-jmx-alias"</i> property <a name="ssl-jmx-alias"/a> |
| * </p> |
| * <U>Description</U>: This property is to be used if a specific key is to be used for the SSL |
| * communications for the jmx manager. |
| * </p> |
| * <U><i>Optional</i></U> <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_JMX_ALIAS = "ssl-jmx-alias"; |
| /** |
| * The static String definition of the <i>"jmx-manager-ssl-ciphers"</i> property <a |
| * name="jmx-manager-ssl-ciphers"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL cipher suites to enable. Those listed |
| * must be supported by the available providers. |
| * </p> |
| * <U>Default</U>: "any" |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_CIPHERS} |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_CIPHERS = "jmx-manager-ssl-ciphers"; |
| /** |
| * The static String definition of the <i>"jmx-manager-ssl-enabled"</i> property <a |
| * name="jmx-manager-ssl-enabled"/a> |
| * </p> |
| * <U>Description</U>: If true and jmx-manager-port is not zero then the jmx-manager will only |
| * accept ssl connections. Note that the ssl-enabled property does not apply to the jmx-manager |
| * but the other ssl properties do. This allows ssl to be configured for just the jmx-manager |
| * without needing to configure it for the other GemFire connections. Ignored if jmx-manager is |
| * false. |
| * </p> |
| * <U>Default</U>: "false" |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_ENABLED_COMPONENTS} with optional |
| * {@link #SSL_JMX_ALIAS} |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_ENABLED = "jmx-manager-ssl-enabled"; |
| /** |
| * The static String definition of the <i>"jmx-manager-ssl-keystore"</i> property <a |
| * name="jmx-manager-ssl-keystore"/a> |
| * </p> |
| * <U>Description</U>: Location of the Java keystore file containing certificate and private key. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE} |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_KEYSTORE = "jmx-manager-ssl-keystore"; |
| /** |
| * The static String definition of the <i>"jmx-manager-ssl-keystore-password"</i> property <a |
| * name="jmx-manager-ssl-keystore-password"/a> |
| * </p> |
| * <U>Description</U>: Password to access the private key from the keystore file specified by |
| * javax.net.ssl.keyStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_PASSWORD} |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_KEYSTORE_PASSWORD = "jmx-manager-ssl-keystore-password"; |
| /** |
| * The static String definition of the <i>"jmx-manager-ssl-keystore-type"</i> property <a |
| * name="jmx-manager-ssl-keystore-type"/a> |
| * </p> |
| * <U>Description</U>: For Java keystore file format, this property has the value jks (or JKS). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_TYPE} |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_KEYSTORE_TYPE = "jmx-manager-ssl-keystore-type"; |
| /** |
| * The static String definition of the <i>"jmx-manager-ssl-protocols"</i> property <a |
| * name="jmx-manager-ssl-protocols"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL protocols to enable. Those listed must be |
| * supported by the available providers. |
| * </p> |
| * <U>Default</U>: "any" |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_PROTOCOLS} |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_PROTOCOLS = "jmx-manager-ssl-protocols"; |
| /** |
| * The static String definition of the <i>"jmx-manager-ssl-require-authentication"</i> property <a |
| * name="jmx-manager-ssl-require-authentication"/a> |
| * </p> |
| * <U>Description</U>: If false, allow ciphers that do not require the client side of the |
| * connection to be authenticated. |
| * </p> |
| * <U>Default</U>: "true" |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_REQUIRE_AUTHENTICATION} |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_REQUIRE_AUTHENTICATION = "jmx-manager-ssl-require-authentication"; |
| /** |
| * The static String definition of the <i>"jmx-manager-ssl-truststore"</i> property <a |
| * name="jmx-manager-ssl-truststore"/a> |
| * </p> |
| * <U>Description</U>: Location of the Java keystore file containing the collection of CA |
| * certificates trusted by manager (trust store). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE} |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_TRUSTSTORE = "jmx-manager-ssl-truststore"; |
| /** |
| * The static String definition of the <i>"jmx-manager-ssl-truststore-password"</i> property <a |
| * name="jmx-manager-ssl-truststore-password"/a> |
| * </p> |
| * <U>Description</U>: Password to unlock the keystore file (store password) specified by |
| * javax.net.ssl.trustStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE_PASSWORD} |
| */ |
| @Deprecated |
| String JMX_MANAGER_SSL_TRUSTSTORE_PASSWORD = "jmx-manager-ssl-truststore-password"; |
| /** |
| * The static String definition of the <i>"load-cluster-configuration-from-dir"</i> property <a |
| * name="load-cluster-configuration-from-dir"/a> |
| * </p> |
| * <U>Description</U>: "true" causes loading of cluster configuration from "cluster_config" |
| * directory in the locator. This property is only applicable to dedicated locators which have |
| * "enable-cluster-configuration" set to true. |
| * </p> |
| * <U>Default</U>: "false" |
| * </p> |
| * <U>Allowed values</U>: true or false |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| */ |
| String LOAD_CLUSTER_CONFIGURATION_FROM_DIR = "load-cluster-configuration-from-dir"; |
| /** |
| * The static String definition of the <i>"ssl-locator-alias"</i> property <a |
| * name="ssl-locator-alias"/a> |
| * </p> |
| * <U>Description</U>: This property is to be used if a specific key is to be used for the SSL |
| * communications for locators and for communicating with locators. |
| * </p> |
| * <U><i>Optional</i></U> <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_LOCATOR_ALIAS = "ssl-locator-alias"; |
| /** |
| * The static String definition of the <i>"locator-wait-time"</i> property <a |
| * name="locator-wait-time"/a> |
| * <p> |
| * <U>Description</U>: The number of seconds to wait for a locator to start if one is not |
| * available when attempting to join the distributed system. This setting can be used when |
| * locators and peers are being started all at once in order to have the peers be patient and wait |
| * for the locators to finish starting up before attempting to join the distributed system.. |
| * <p> |
| * <p> |
| * <U>Default</U>: "0" |
| */ |
| String LOCATOR_WAIT_TIME = "locator-wait-time"; |
| /** |
| * The static String definition of the <i>"locators"</i> property <a name="locators"/a> |
| * <p> |
| * <U>Description</U>: A list of locators (host and port) that are used to find other member of |
| * the distributed system. This attribute's value may be empty or contain one or more comma |
| * separated elements. Each element must be of the form "hostname[portNumber]" or |
| * "hostname:bindAddress[portNumber]" if a specific bind address is to be used on the locator |
| * machine. The square brackets around the portNumber are literal characters and must be |
| * specified. The hostname may be a name from DNS or the local hosts file or a literal IP address. |
| * <p> |
| * For example, "locator1[10334]" specifies a locator running on "locator1" on port 10334, while |
| * "locator1[10334],locator2:204.44.44.1[11336]" specifies two locators; one running on "locator1" |
| * on port 10334, and another running on "locator2" and bound to 204.44.44.1 on port 11336. |
| * <p> |
| * Since IPv6 bind addresses may contain colons, you may use an at symbol instead of a colon to |
| * separate the host name and bind address. For example, "server1@fdf0:76cf:a0ed:9449::5[12233]" |
| * specifies a locator running on "server1" and bound to fdf0:76cf:a0ed:9449::5 on port 12233. |
| * <p> |
| * If "locators" is empty then this distributed system will be isolated from all other GemFire |
| * processes. |
| * <p> |
| * <U>Default</U>: "" |
| */ |
| String LOCATORS = MembershipConfig.LOCATORS; |
| /** |
| * The static String definition of the <i>"log-disk-space-limit"</i> property <a |
| * name="log-disk-space-limit"/a> |
| * </p> |
| * <U>Description</U>: Limits, in megabytes, how much disk space can be consumed by old inactive |
| * log files. When the limit is exceeded the oldest inactive log file is deleted. Set to zero to |
| * disable automatic log file deletion. |
| * </p> |
| * <U>Default</U>: "0" |
| * </p> |
| * <U>Allowed values</U>: 0..1000000 |
| */ |
| String LOG_DISK_SPACE_LIMIT = "log-disk-space-limit"; |
| /** |
| * The static String definition of the <i>"log-file"</i> property <a name="log-file"/a> |
| * </p> |
| * <U>Description</U>: Name of the file to write logging messages to. If the file name is "" |
| * (default) then messages are written to standard out. |
| * </p> |
| * <U>Default</U>: "" |
| */ |
| String LOG_FILE = "log-file"; |
| /** |
| * The static String definition of the <i>"log-file-size-limit"</i> property <a |
| * name="log-file-size-limit"/a> |
| * </p> |
| * <U>Description</U>: Limits, in megabytes, how large the current log file can grow before it is |
| * closed and logging rolls on to a new file. Set to zero to disable log rolling. |
| * </p> |
| * <U>Default</U>: "0" |
| * </p> |
| * <U>Allowed values</U>: 0..1000000 |
| */ |
| String LOG_FILE_SIZE_LIMIT = "log-file-size-limit"; |
| /** |
| * The static String definition of the <i>"log-level"</i> property <a name="log-level"/a> |
| * </p> |
| * <U>Description</U>:The type of log messages that will actually write to the log file. |
| * </p> |
| * <U>Default</U>: "config" |
| * </p> |
| * <U>Allowed values</U>: all|finest|finer|fine|config|info|warning|severe|none |
| */ |
| String LOG_LEVEL = "log-level"; |
| /** |
| * The static String definition of the <i>"max-num-reconnect-tries"</i> property <a |
| * name="max-num-reconnect-tries"/a> |
| * </p> |
| * <U>Description</U>: Specifies the maximum number or times to attempt to reconnect to the |
| * distributed system when required roles are missing. This does not apply to reconnect attempts |
| * due to a forced disconnect. |
| * </p> |
| * <U>Deprecated</U>: this setting is scheduled to be removed. |
| * </p> |
| * <U>Default</U>: "3" |
| * </p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String MAX_NUM_RECONNECT_TRIES = "max-num-reconnect-tries"; |
| /** |
| * The static String definition of the <i>"max-wait-time-reconnect"</i> property <a |
| * name="max-wait-time-reconnect"/a> |
| * </p> |
| * <U>Description</U>: Specifies the time in milliseconds to wait before each reconnect attempt |
| * when a member of the distributed system is forced out of the system and auto-reconnect is |
| * enabled (see <a href="#disable-auto-reconnect"><code>disable-auto-reconnect</code></a>) or if |
| * the deprecated required-roles feature is being used and a role-loss has triggered a shutdown |
| * and reconnect. |
| * </p> |
| * <U>Default</U>: "60000" |
| * </p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String MAX_WAIT_TIME_RECONNECT = "max-wait-time-reconnect"; |
| /** |
| * The static String definition of the <i>"mcast-address"</i> property <a name="mcast-address"/a> |
| * <p> |
| * <U>Description</U>: The IP address used for multicast networking. If mcast-port is zero, then |
| * mcast-address is ignored. |
| * <p> |
| * <U>Default</U>: "239.192.81.1" |
| */ |
| String MCAST_ADDRESS = "mcast-address"; |
| /** |
| * The static String definition of the <i>"mcast-flow-control"</i> property <a |
| * name="mcast-flow-control"/a> |
| * <p> |
| * <U>Description</U>: Configures the flow-of-control protocol for multicast messaging. There are |
| * three settings that are separated by commas: byteAllowance (integer), rechargeThreshold (float) |
| * and rechargeBlockMs (integer). The byteAllowance determines how many bytes can be sent without |
| * a recharge from other processes. The rechargeThreshold tells receivers how low the sender's |
| * initial to remaining allowance ratio should be before sending a recharge. The rechargeBlockMs |
| * tells the sender how long to wait for a recharge before explicitly requesting one. |
| * <p> |
| * <U>Deprecated</U>: as of 9.0 GemFire does not include a flow-of-control protocol for multicast |
| * messaging. |
| * <p> |
| * <U>Default</U>: "1048576,0.25,5000" |
| * <p> |
| * <U>Allowed values</U>: 100000-maxInt, 0.1-0.5, 500-60000 |
| * <p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String MCAST_FLOW_CONTROL = "mcast-flow-control"; |
| /** |
| * The static String definition of the <i>"mcast-port"</i> property <a name="mcast-port"/a> |
| * <p> |
| * <U>Description</U>: The port used for multicast networking. If zero, then multicast will be |
| * disabled and unicast messaging will be used. |
| * <p> |
| * <U>Default</U>: "0" |
| */ |
| String MCAST_PORT = "mcast-port"; |
| /** |
| * The static String definition of the <i>"mcast-recv-buffer-size"</i> property <a |
| * name="mcast-recv-buffer-size"/a> |
| * <p> |
| * <U>Description</U>: Sets the size of the socket buffer used for incoming multicast |
| * transmissions. You should set this high if there will be high volumes of messages. |
| * <U>Default</U>: "1048576" |
| * <p> |
| * <U>Allowed values</U>: 2048..Operating System maximum |
| * <p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String MCAST_RECV_BUFFER_SIZE = "mcast-recv-buffer-size"; |
| /** |
| * The static String definition of the <i>"mcast-send-buffer-size"</i> property <a |
| * name="mcast-send-buffer-size"/a> |
| * <p> |
| * <U>Description</U>: Sets the size of the socket buffer used for outgoing multicast |
| * transmissions. <U>Default</U>: "65535" |
| * <p> |
| * <U>Allowed values</U>: 2048..Operating System maximum |
| * <p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String MCAST_SEND_BUFFER_SIZE = "mcast-send-buffer-size"; |
| /** |
| * The static String definition of the <i>"mcast-ttl"</i> property <a name="mcast-ttl"/a> |
| * <p> |
| * <U>Description</U>: Determines how far through your network the multicast packets used by |
| * GemFire will propagate. <U>Default</U>: "32" |
| * <p> |
| * <U>Allowed values</U>: 0..255 |
| * <p> |
| * <U>Since</U>: GemFire 4.1 |
| */ |
| String MCAST_TTL = "mcast-ttl"; |
| /** |
| * The static String definition of the <i>"member-timeout"</i> property <a |
| * name="member-timeout"/a> |
| * <p> |
| * <U>Description</U>: Sets the timeout interval, in milliseconds, used to determine whether |
| * another process is alive or not. When another process appears to be gone, GemFire sends it an |
| * ARE-YOU-DEAD message and waits for the member-timeout period for it to respond and declare it |
| * is not dead. |
| * <p> |
| * <U>Default</U>: "5000" |
| * <p> |
| * <U>Allowed values</U>: 1000-600000 |
| * <p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String MEMBER_TIMEOUT = "member-timeout"; |
| /** |
| * The static String definition of the <i>"membership-port-range"</i> property <a |
| * name="membership-port-range"/a> |
| * <p> |
| * <U>Description</U>: The allowed range of ports for use in forming an unique membership |
| * identifier (UDP), for failure detection purposes (TCP) and to listen on for peer connections |
| * (TCP). This range is given as two numbers separated by a minus sign. Minimum 3 values in range |
| * are required to successfully startup. |
| * <p> |
| * <U>Default</U>: 41000-61000 |
| */ |
| String MEMBERSHIP_PORT_RANGE = "membership-port-range"; |
| /** |
| * The static String definition of the <i>"memcached-bind-address"</i> property <a |
| * name="memcached-bind-address"/a> |
| * </p> |
| * <U>Description</U>: Specifies the bind address used by |
| * {@code org.apache.geode.memcached.GemFireMemcachedServer} |
| * </p> |
| * <U>Default</U>: "" |
| */ |
| String MEMCACHED_BIND_ADDRESS = "memcached-bind-address"; |
| /** |
| * The static String definition of the <i>"memcached-port"</i> property <a |
| * name="memcached-port"/a> |
| * </p> |
| * <U>Description</U>: Specifies the port used by |
| * {@code org.apache.geode.memcached.GemFireMemcachedServer} which enables memcached clients to |
| * connect and store data in GemFire distributed system. see |
| * {@code org.apache.geode.memcached.GemFireMemcachedServer} for other configuration options. |
| * </p> |
| * <U>Default</U>: "0" disables GemFireMemcachedServer |
| * </p> |
| * <U>Allowed values</U>: 0..65535 |
| */ |
| String MEMCACHED_PORT = "memcached-port"; |
| /** |
| * The static String definition of the <i>"memcached-protocol"</i> property <a |
| * name="memcached-protocol"/a> |
| * </p> |
| * <U>Description</U>: Specifies the protocol used by |
| * {@code org.apache.geode.memcached.GemFireMemcachedServer} |
| * </p> |
| * <U>Default</U>: "ASCII" |
| * </p> |
| * <U>Allowed values</U>: "ASCII" "BINARY" |
| */ |
| String MEMCACHED_PROTOCOL = "memcached-protocol"; |
| /** |
| * The static string definition of the <i>"name"</i> property <a name="name"> |
| * <p> |
| * <U>Description</U>: Uniquely identifies a member in its distributed system. If two members with |
| * the same name try to join the same distributed system then the second join will fail. |
| * <p> |
| * <U>Default</U>: "" |
| */ |
| String NAME = "name"; |
| /** |
| * The static String definition of the <i>"redundancy-zone"</i> property <a |
| * name="redundancy-zone"/a> |
| * </p> |
| * <u>Description</u>: Defines the redundancy zone from this member. If this property is set, |
| * partitioned regions will not put two redundant copies of data in two members with the same |
| * redundancy zone setting. |
| * </p> |
| * <u>Default</u>: "" |
| */ |
| String REDUNDANCY_ZONE = "redundancy-zone"; |
| /** |
| * The static String definition of the <i>"remote-locators"</i> property <a |
| * name="remote-locators"/a> |
| * <p> |
| * <U>Description</U>: A list of locators (host and port) that a cluster will use in order to |
| * connect to a remote site in a multi-site (WAN) configuration. This attribute's value is a |
| * possibly comma separated list. |
| * <p> |
| * For each remote locator, provide a hostname and/or address (separated by '@', if you use both), |
| * followed by a port number in brackets. |
| * <p> |
| * Examples: remote-locators=address1[port1],address2[port2] |
| * <p> |
| * remote-locators=hostName1@address1[port1],hostName2@address2[port2] |
| * <p> |
| * remote-locators=hostName1[port1],hostName2[port2] |
| * <p> |
| * <p> |
| * <U>Default</U>: "" |
| */ |
| String REMOTE_LOCATORS = "remote-locators"; |
| /** |
| * The static String definition of the <i>"remove-unresponsive-client"</i> property |
| */ |
| String REMOVE_UNRESPONSIVE_CLIENT = "remove-unresponsive-client"; |
| /** |
| * The static String definition of the <i>"roles"</i> property <a name="roles"/a> |
| * </p> |
| * <U>Description</U>: Specifies the application roles that this member performs in the |
| * distributed system. This is a comma delimited list of user-defined strings. Any number of |
| * members can be configured to perform the same role, and a member can be configured to perform |
| * any number of roles. Note that anything defined by the groups gemfire property will also be |
| * considered a role. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 5.0 |
| * </p> |
| * <U>Deprecated</U>: This feature is scheduled to be removed. |
| * |
| * @deprecated : This feature is scheduled to be removed. |
| */ |
| String ROLES = "roles"; |
| /** |
| * The static String definition of the security prefix "security-" used in conjunction with other |
| * security-* properties</i> property <a name="security-"/a> |
| * </p> |
| * <U>Description</U>: Mechanism to define client credentials. All tags with "security-" prefix is |
| * packaged together as security properties and passed as an argument to getCredentials of |
| * Authentication module. These tags cannot have null values. |
| * </p> |
| * <U>Default</U>: Optional |
| * </p> |
| * <U>Allowed values</U>: any string |
| */ |
| String SECURITY_PREFIX = "security-"; |
| /** |
| * The static String definition of the <i>"security-client-accessor"</i> property |
| * |
| * @deprecated since Geode 1.0, use security-manager |
| */ |
| String SECURITY_CLIENT_ACCESSOR = SECURITY_PREFIX + "client-accessor"; |
| /** |
| * The static String definition of the <i>"security-client-accessor-pp"</i> property |
| * |
| * @deprecated since Geode 1.0, use security-post-processor |
| */ |
| String SECURITY_CLIENT_ACCESSOR_PP = SECURITY_PREFIX + "client-accessor-pp"; |
| /** |
| * The static String definition of the <i>"security-client-auth-init"</i> property <a |
| * name="security-client-auth-init"/a> |
| * </p> |
| * <U>Description</U>: Authentication module name for Clients that requires to act upon |
| * credentials read from the gemfire.properties file. Module must implement AuthInitialize |
| * interface. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Allowed values</U>: jar file:class name |
| */ |
| String SECURITY_CLIENT_AUTH_INIT = SECURITY_PREFIX + "client-auth-init"; |
| /** |
| * The static String definition of the <i>"security-manager"</i> property |
| * |
| * @since Geode 1.0 |
| */ |
| String SECURITY_MANAGER = SECURITY_PREFIX + "manager"; |
| |
| /** |
| * The static String definition of the <i>"security-post-processor"</i> property |
| * |
| * @since Geode 1.0 |
| */ |
| String SECURITY_POST_PROCESSOR = SECURITY_PREFIX + "post-processor"; |
| |
| /** |
| * The static String definition of the <i>"security-client-authenticator"</i> property |
| * |
| * @deprecated since Geode 1.0, use security-manager |
| */ |
| String SECURITY_CLIENT_AUTHENTICATOR = SECURITY_PREFIX + "client-authenticator"; |
| /** |
| * The static String definition of the <i>"security-client-dhalgo"</i> property |
| * |
| * @deprecated since Geode 1.5. Use SSL instead. See {{@link #SSL_ENABLED_COMPONENTS}} |
| */ |
| String SECURITY_CLIENT_DHALGO = SECURITY_PREFIX + "client-dhalgo"; |
| /** |
| * The static String definition of the <i>"security-udp-dhalgo"</i> property. Application can set |
| * this property to valid symmetric key algorithm, to encrypt udp messages in Geode. Geode will |
| * generate symmetric key using Diffie-Hellman key exchange algorithm between peers. That key |
| * further used by specified algorithm to encrypt the udp messages. |
| */ |
| String SECURITY_UDP_DHALGO = SECURITY_PREFIX + "udp-dhalgo"; |
| /** |
| * The static String definition of the <i>"security-log-file"</i> property |
| */ |
| String SECURITY_LOG_FILE = SECURITY_PREFIX + "log-file"; |
| /** |
| * The static String definition of the <i>"security-log-level"</i> property |
| */ |
| String SECURITY_LOG_LEVEL = SECURITY_PREFIX + "log-level"; |
| /** |
| * The static String definition of the <i>"security-peer-auth-init"</i> property |
| */ |
| String SECURITY_PEER_AUTH_INIT = SECURITY_PREFIX + "peer-auth-init"; |
| /** |
| * The static String definition of the <i>"security-peer-authenticator"</i> property |
| * |
| * @deprecated since Geode 1.0, use security-manager |
| */ |
| String SECURITY_PEER_AUTHENTICATOR = SECURITY_PREFIX + "peer-authenticator"; |
| /** |
| * The static String definition of the <i>"security-peer-verifymember-timeout"</i> property |
| */ |
| String SECURITY_PEER_VERIFY_MEMBER_TIMEOUT = SECURITY_PREFIX + "peer-verifymember-timeout"; |
| /** |
| * The static String definition of the <i>"server-bind-address"</i> property <a |
| * name="server-bind-address"/a> |
| * <p> |
| * <U>Description</U>: The IP address that this distributed system's server sockets in a |
| * client-server topology will listen on. If set to an empty string then all of the local |
| * machine's addresses will be listened on. |
| * <p> |
| * <U>Default</U>: "" |
| */ |
| String SERVER_BIND_ADDRESS = "server-bind-address"; |
| /** |
| * The static String definition of the <i>"ssl-server-alias"</i> property <a |
| * name="ssl-server-alias"/a> |
| * </p> |
| * <U>Description</U>: This property is to be used if a specific key is to be used for the SSL |
| * communications for client-server. |
| * </p> |
| * <U><i>Optional</i></U> <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_SERVER_ALIAS = "ssl-server-alias"; |
| /** |
| * The static String definition of the <i>"server-ssl-ciphers"</i> property <a |
| * name="server-ssl-ciphers"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL cipher suites to enable. Those listed |
| * must be supported by the available providers. |
| * </p> |
| * <U>Default</U>: <code>any</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_CIPHERS} |
| */ |
| @Deprecated |
| String SERVER_SSL_CIPHERS = "server-ssl-ciphers"; |
| /** |
| * The static String definition of the <i>"server-ssl-enabled"</i> property <a |
| * name="server-ssl-enabled"/a> |
| * </p> |
| * <U>Description</U>: Specifies if server is started with separate ssl configuration. If not |
| * specified global property ssl-enabled (and its other related properties) are used to create |
| * server socket |
| * </p> |
| * <U>Default</U>: <code>false</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_ENABLED_COMPONENTS} with optional |
| * {@link #SSL_SERVER_ALIAS} |
| */ |
| @Deprecated |
| String SERVER_SSL_ENABLED = "server-ssl-enabled"; |
| /** |
| * The static String definition of the <i>"server-ssl-keystore"</i> property <a |
| * name="server-ssl-keystore"/a> |
| * </p> |
| * <U>Description</U>: Location of the Java keystore file containing certificate and private key. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE} |
| */ |
| @Deprecated |
| String SERVER_SSL_KEYSTORE = "server-ssl-keystore"; |
| /** |
| * The static String definition of the <i>"server-ssl-keystore-password"</i> property <a |
| * name="server-ssl-keystore-password"/a> |
| * </p> |
| * <U>Description</U>: Password to access the private key from the keystore file specified by |
| * javax.net.ssl.keyStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_PASSWORD} |
| */ |
| @Deprecated |
| String SERVER_SSL_KEYSTORE_PASSWORD = "server-ssl-keystore-password"; |
| /** |
| * The static String definition of the <i>"server-ssl-keystore-type"</i> property <a |
| * name="server-ssl-keystore-type"/a> |
| * </p> |
| * <U>Description</U>: For Java keystore file format, this property has the value jks (or JKS). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_KEYSTORE_TYPE} |
| */ |
| @Deprecated |
| String SERVER_SSL_KEYSTORE_TYPE = "server-ssl-keystore-type"; |
| /** |
| * The static String definition of the <i>"server-ssl-protocols"</i> property <a |
| * name="server-ssl-protocols"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL protocols to enable. Those listed must be |
| * supported by the available providers. |
| * </p> |
| * <U>Default</U>: <code>any</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_PROTOCOLS} |
| */ |
| @Deprecated |
| String SERVER_SSL_PROTOCOLS = "server-ssl-protocols"; |
| /** |
| * The static String definition of the <i>"server-ssl-require-authentication"</i> property <a |
| * name="server-ssl-require-authentication"/a> |
| * </p> |
| * <U>Description</U>: If false, allow ciphers that do not require the client side of the |
| * connection to be authenticated. |
| * </p> |
| * <U>Default</U>: <code>any</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_REQUIRE_AUTHENTICATION} |
| */ |
| @Deprecated |
| String SERVER_SSL_REQUIRE_AUTHENTICATION = "server-ssl-require-authentication"; |
| /** |
| * The static String definition of the <i>"server-ssl-truststore"</i> property <a |
| * name="server-ssl-truststore"/a> |
| * </p> |
| * <U>Description</U>: Location of the Java keystore file containing the collection of CA |
| * certificates trusted by server (trust store). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE} |
| */ |
| @Deprecated |
| String SERVER_SSL_TRUSTSTORE = "server-ssl-truststore"; |
| /** |
| * The static String definition of the <i>"server-ssl-truststore-password"</i> property <a |
| * name="server-ssl-truststore-password"/a> |
| * </p> |
| * <U>Description</U>: Password to unlock the keystore file (store password) specified by |
| * javax.net.ssl.trustStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| * |
| * @deprecated Since Geode 1.0 use {@link #SSL_TRUSTSTORE_PASSWORD} |
| */ |
| @Deprecated |
| String SERVER_SSL_TRUSTSTORE_PASSWORD = "server-ssl-truststore-password"; |
| /** |
| * The static String definition of the <i>"socket-buffer-size"</i> property <a |
| * name="socket-buffer-size"/a> |
| * </p> |
| * <U>Description</U>: The size of each socket buffer, in bytes. Smaller buffers conserve memory. |
| * Larger buffers can improve performance; in particular if large messages are being sent. |
| * <U>Default</U>: "32768" |
| * </p> |
| * <U>Allowed values</U>: 128..16777215 |
| * </p> |
| * <U>Since</U>: GemFire 4.1 |
| */ |
| String SOCKET_BUFFER_SIZE = "socket-buffer-size"; |
| /** |
| * The static String definition of the <i>"socket-lease-time"</i> property <a |
| * name="socket-lease-time"/a> |
| * </p> |
| * <U>Description</U>: The number of milliseconds a thread can keep exclusive access to a socket |
| * that it is not actively using. Once a thread loses its lease to a socket it will need to |
| * re-acquire a socket the next time it sends a message. A value of zero causes socket leases to |
| * never expire. This property is ignored if "conserve-sockets" is true. <U>Default</U>: "60000" |
| * </p> |
| * <U>Allowed values</U>: 0..600000 |
| * </p> |
| * <U>Since</U>: GemFire 4.1 |
| */ |
| String SOCKET_LEASE_TIME = "socket-lease-time"; |
| /** |
| * The static String definition of the <i>"start-dev-rest-api"</i> property <a |
| * name="start-dev-rest-api"/a> |
| * </p> |
| * <U>Description</U>: If true then developer(API) REST service will be started when cache is |
| * created. REST service can be configured using <code>http-service-port</code> and |
| * <code>http-service-bind-address</code> properties. |
| * </p> |
| * <U>Default</U>: "false" |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| */ |
| String START_DEV_REST_API = "start-dev-rest-api"; |
| /** |
| * The static String definition of the <i>"start-locator"</i> property <a name="start-locator"/a> |
| * </p> |
| * <U>Description</U>: A host name or bind-address and port ("host[port]") that are used to start |
| * a locator in the same process as the DistributedSystem. The locator is started when the |
| * DistributedSystem connects, and is stopped when the DistributedSystem disconnects. To start a |
| * locator that is not tied to the DistributedSystem's lifecycle, see the {@link Locator} class in |
| * this same package. |
| * <p> |
| * <U>Default</U>: "" (doesn't start a locator) |
| */ |
| String START_LOCATOR = MembershipConfig.START_LOCATOR; |
| /** |
| * The static String definition of the <i>"statistic-archive-file"</i> property <a |
| * name="statistic-archive-file"/a> |
| * </p> |
| * <U>Description</U>: The file that statistic samples are written to. An empty string (default) |
| * disables statistic archival. |
| * </p> |
| * <U>Default</U>: "" |
| */ |
| String STATISTIC_ARCHIVE_FILE = "statistic-archive-file"; |
| /** |
| * The static String definition of the <i>"statistic-sample-rate"</i> property <a |
| * name="statistic-sample-rate"/a> |
| * </p> |
| * <U>Description</U>: The rate, in milliseconds, at which samples of the statistics will be |
| * taken. If set to a value less than 1000 the rate will be set to 1000 because the VSD tool does |
| * not support sub-second sampling. |
| * </p> |
| * <U>Default</U>: "1000" |
| * </p> |
| * <U>Allowed values</U>: 100..60000 |
| */ |
| String STATISTIC_SAMPLE_RATE = "statistic-sample-rate"; |
| /** |
| * The static String definition of the <i>"statistic-sampling-enabled"</i> property <a |
| * name="statistic-sampling-enabled"/a> |
| * </p> |
| * <U>Description</U>: "true" causes the statistics to be sampled periodically and operating |
| * system statistics to be fetched each time a sample is taken. "false" disables sampling which |
| * also disables operating system statistic collection. Non OS statistics will still be recorded |
| * in memory and can be viewed by administration tools. However, charts will show no activity and |
| * no statistics will be archived while sampling is disabled. Starting in 7.0 the default value |
| * has been changed to true. If statistic sampling is disabled it will also cause various metrics |
| * seen in gfsh and pulse to always be zero. |
| * </p> |
| * <U>Default</U>: "true" |
| * </p> |
| * <U>Allowed values</U>: true|false |
| */ |
| String STATISTIC_SAMPLING_ENABLED = "statistic-sampling-enabled"; |
| /** |
| * The static String definition of the <i>"tcp-port"</i> property <a name="tcp-port"/a> |
| * <p> |
| * <U>Description</U>: A 16-bit integer that determines the tcp/ip port number to listen on for |
| * cache communications. If zero, the operating system will select an available port to listen on. |
| * Each process on a machine must have its own tcp-port. Note that some operating systems restrict |
| * the range of ports usable by non-privileged users, and using restricted port numbers can cause |
| * runtime errors in GemFire startup. |
| * <p> |
| * <U>Default</U>: "0" |
| * <p> |
| * <U>Allowed values</U>: 0..65535 |
| * <p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String TCP_PORT = "tcp-port"; |
| /** |
| * The static String definition of the <i>"udp-fragment-size"</i> property <a |
| * name="udp-fragment-size"/a> |
| * <p> |
| * <U>Description</U>: When messages are sent over datagram sockets, GemFire breaks large messages |
| * down into fragments for transmission. This property sets the maximum fragment size for |
| * transmission. <U>Default</U>: "60000" |
| * <p> |
| * <U>Allowed values</U>: 1000..60000 |
| * <p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String UDP_FRAGMENT_SIZE = "udp-fragment-size"; |
| /** |
| * The static String definition of the <i>"udp-recv-buffer-size"</i> property <a |
| * name="udp-recv-buffer-size"/a> |
| * <p> |
| * <U>Description</U>: Sets the size of the socket buffer used for incoming udp point-to-point |
| * transmissions. Note: if multicast is not enabled and disable-tcp is not enabled, a reduced |
| * default size of 65535 is used. <U>Default</U>: "1048576 if multicast is enabled or disable-tcp |
| * is true, 131071 if not" |
| * <p> |
| * <U>Allowed values</U>: 2048..Operating System maximum |
| * <p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String UDP_RECV_BUFFER_SIZE = "udp-recv-buffer-size"; |
| /** |
| * The static String definition of the <i>"udp-send-buffer-size"</i> property <a |
| * name="udp-send-buffer-size"/a> |
| * <p> |
| * <U>Description</U>: Sets the size of the socket buffer used for outgoing udp point-to-point |
| * transmissions. <U>Default</U>: "65535" |
| * <p> |
| * <U>Allowed values</U>: 2048..Operating System maximum |
| * <p> |
| * <U>Since</U>: GemFire 5.0 |
| */ |
| String UDP_SEND_BUFFER_SIZE = "udp-send-buffer-size"; |
| /** |
| * The static String definition of the <i>"use-cluster-configuration"</i> property <a |
| * name="use-cluster-configuration"/a> |
| * </p> |
| * <U>Description</U>: This property is only applicable for data members (non client and non |
| * locator) "true" causes a member to request and uses the configuration from cluster |
| * configuration services running on dedicated locators. "false" causes a member to not request |
| * the configuration from the configuration services running on the locator(s). |
| * </p> |
| * <U>Default</U>: "true" |
| * </p> |
| * <U>Allowed values</U>: true or false |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| */ |
| String USE_CLUSTER_CONFIGURATION = "use-cluster-configuration"; |
| /** |
| * The static String definition of the <i>"user-command-packages"</i> property <a |
| * name="user-command-packages"/a> |
| * </p> |
| * <U>Description</U>: A comma separated list of Java packages that contain classes implementing |
| * the <code>CommandMarker</code> interface. Matching classes will be loaded when the VM starts |
| * and will be available in the GFSH command-line utility. |
| * </p> |
| * <U>Default</U>: <code>""</code> |
| * </p> |
| * <U>Since</U>: GemFire 8.0 |
| */ |
| String USER_COMMAND_PACKAGES = "user-command-packages"; |
| /** |
| * The static String definition of the <i>"off-heap-memory-size"</i> property <a |
| * name="off-heap-memory-size"/a> |
| * </p> |
| * <U>Description</U>: The total size of off-heap memory specified as |
| * off-heap-memory-size=<n>[g|m]. <n> is the size. [g|m] indicates whether the size should be |
| * interpreted as gigabytes or megabytes. By default no off-heap memory is allocated. A non-zero |
| * value will cause that much memory to be allocated from the operating system and reserved for |
| * off-heap use. |
| * </p> |
| * <U>Default</U>: <code>""</code> |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String OFF_HEAP_MEMORY_SIZE = "off-heap-memory-size"; |
| /** |
| * The static String definition of the <i>"redis-port"</i> property <a name="redis-port"/a> |
| * </p> |
| * <U>Description</U>: Specifies the port used by {@code GeodeRedisServer} which enables redis |
| * clients to connect and store data in GemFire distributed system. see {@code GeodeRedisServer} |
| * for other configuration options. |
| * </p> |
| * <U>Default</U>: "0" disables GemFireMemcachedServer |
| * </p> |
| * <U>Allowed values</U>: 0..65535 |
| */ |
| String REDIS_PORT = "redis-port"; |
| /** |
| * The static String definition of the <i>"redis-bind-address"</i> property <a |
| * name="redis-bind-address"/a> |
| * </p> |
| * <U>Description</U>: Specifies the bind address used by {@code GeodeRedisServer} |
| * </p> |
| * <U>Default</U>: "" |
| */ |
| String REDIS_BIND_ADDRESS = "redis-bind-address"; |
| /** |
| * The static String definition of the <i>"redis-password"</i> property <a |
| * name="redis-password"/a> |
| * </p> |
| * <U>Description</U>: Specifies the password to authenticate a client of {@code GeodeRedisServer} |
| * </p> |
| * <U>Default</U>: "" |
| */ |
| String REDIS_PASSWORD = "redis-password"; |
| /** |
| * The static String definition of the <i>"lock-memory"</i> property <a name="lock-memory"/a> |
| * </p> |
| * <U>Description</U>: Include this option to lock GemFire heap and off-heap memory pages into |
| * RAM. This prevents the operating system from swapping the pages out to disk, which can cause |
| * sever performance degradation. When you use this command, also configure the operating system |
| * limits for locked memory. |
| * </p> |
| * <U>Default</U>: <code>"false"</code> |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String LOCK_MEMORY = "lock-memory"; |
| /** |
| * The static String definition of the <i>"shiro-init"</i> property <U>Since</U>: Geode 1.0 |
| */ |
| String SECURITY_SHIRO_INIT = SECURITY_PREFIX + "shiro-init"; |
| /** |
| * The static String definition of the <i>"distributed-transactions"</i> property <U>Since</U>: |
| * Geode 1.0 |
| */ |
| String DISTRIBUTED_TRANSACTIONS = "distributed-transactions"; |
| |
| /** |
| * The static String definition of the <i>"ssl-use-default-context"</i> property |
| * </p> |
| * |
| * <U>Description</U> When true, either uses the default context as returned by |
| * SSLContext.getInstance('Default') or uses the context as set by using |
| * SSLContext.setDefault(). If false, then specify the keystore and the truststore by setting |
| * ssl-keystore-* and ssl-truststore-* properties. If true, then |
| * ssl-endpoint-identification-enabled |
| * is set to true. This property does not enable SSL. |
| * </p> |
| * |
| * <U>Default</U>: "false" |
| * </p> |
| * |
| * <U>Since</U>: Geode 1.7 |
| * </p> |
| */ |
| String SSL_USE_DEFAULT_CONTEXT = "ssl-use-default-context"; |
| /** |
| * The static String definition of the <i>"ssl-endpoint-identification-enabled"</i> property <a |
| * name="ssl-endpoint-identification-enabled"/a> |
| * </p> |
| * <U>Description</U>: If true, clients validate server hostname using server certificate during |
| * SSL handshake. It defaults to true when ssl-use-default-context is true or else false. |
| * </p> |
| * <U>Default</U>: code>"false"</code> |
| * </p> |
| * <U>Since</U>: Geode 1.7 |
| */ |
| String SSL_ENDPOINT_IDENTIFICATION_ENABLED = "ssl-endpoint-identification-enabled"; |
| /** |
| * The static String definition of the <i>"ssl-enabled-components"</i> property <a |
| * name="ssl-enabled-components"/a> |
| * </p> |
| * <U>Description</U>: This setting is a comma delimited fields which works in conjunction with |
| * the {@link #CLUSTER_SSL_PREFIX} properties. This property will determine which components will |
| * use SSL for their communications. |
| * </p> |
| * <U>Options</U>: "all","server","cluster","gateway","web","jmx","" -- As described |
| * {@link org.apache.geode.security.SecurableCommunicationChannels} <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_ENABLED_COMPONENTS = "ssl-enabled-components"; |
| |
| /** |
| * The static String definition of the <i>"security-auth-token-enabled-components"</i> property <a |
| * name="security-auth-token-enabled-components"/a> |
| * </p> |
| * <U>Description</U>: This setting is a comma delimited list of component names which works in |
| * conjunction with |
| * the {@link #SECURITY_MANAGER} properties. if security manager is enabled, this property will |
| * determine what rest end point will use token based authentication instead of basic |
| * (username/password) |
| * authentication. |
| * </p> |
| * <U>Componant names</U>: "all","management" <U>Since</U>: Geode 1.11 |
| * "pulse" <U>Since</U>: Geode 1.13 |
| * "all": shorthand for all the security components that support token authentication. |
| * "management": the {@link #ENABLE_MANAGEMENT_REST_SERVICE Management REST Service} |
| * "pulse": the Pulse web app |
| * |
| * Note: listing components that are not enabled does nothing. |
| * |
| * Default: empty. All security components use basic (username/password) authentication |
| */ |
| String SECURITY_AUTH_TOKEN_ENABLED_COMPONENTS = SECURITY_PREFIX + "auth-token-enabled-components"; |
| /** |
| * The static String definition of the <i>"ssl-ciphers"</i> property <a name="ssl-ciphers"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL cipher suites to enable. Those listed |
| * must be supported by the available providers. |
| * </p> |
| * <U>Default</U>: "any" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_CIPHERS = "ssl-ciphers"; |
| /** |
| * The static String definition of the <i>"ssl-keystore"</i> property <a name="ssl-keystore"/a> |
| * </p> |
| * <U>Description</U>Location of the Java keystore file containing certificate and private key. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_KEYSTORE = "ssl-keystore"; |
| /** |
| * The static String definition of the <i>"ssl-keystore-password"</i> property <a |
| * name="ssl-keystore-password"/a> |
| * </p> |
| * <U>Description</U>Password to access the private key from the keystore file specified by |
| * javax.net.ssl.keyStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_KEYSTORE_PASSWORD = "ssl-keystore-password"; |
| /** |
| * The static String definition of the <i>"ssl-keystore-type"</i> property <a |
| * name="ssl-keystore-type"/a> |
| * </p> |
| * <U>Description</U>For Java keystore file format, this property has the value jks (or JKS). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_KEYSTORE_TYPE = "ssl-keystore-type"; |
| |
| /** |
| * The static String definition of the <i>"ssl-truststore-type"</i> property <a |
| * name="ssl-truststore-type"/a> |
| * </p> |
| * <U>Description</U>For Java truststore file format, this property has the value jks (or JKS). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.3 |
| */ |
| String SSL_TRUSTSTORE_TYPE = "ssl-truststore-type"; |
| /** |
| * The static String definition of the <i>"cluster-ssl-protocols"</i> property <a |
| * name="ssl-protocols"/a> |
| * </p> |
| * <U>Description</U>: A space separated list of the SSL protocols to enable. Those listed must be |
| * supported by the available providers. |
| * </p> |
| * <U>Default</U>: "any" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_PROTOCOLS = "ssl-protocols"; |
| /** |
| * The static String definition of the <i>"ssl-require-authentication"</i> property <a |
| * name="ssl-require-authentication"/a> |
| * </p> |
| * <U>Description</U>: If false, allow ciphers that do not require the client side of the |
| * connection to be authenticated. |
| * </p> |
| * <U>Default</U>: "true" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_REQUIRE_AUTHENTICATION = "ssl-require-authentication"; |
| /** |
| * The static String definition of the <i>"ssl-truststore"</i> property <a |
| * name="ssl-truststore"/a> |
| * </p> |
| * <U>Description</U>Location of the Java keystore file containing the collection of CA |
| * certificates trusted by distributed member (trust store). |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_TRUSTSTORE = "ssl-truststore"; |
| /** |
| * The static String definition of the <i>"ssl-truststore-password"</i> property <a |
| * name="ssl-truststore-password"/a> |
| * </p> |
| * <U>Description</U>Password to unlock the keystore file (store password) specified by |
| * javax.net.ssl.trustStore. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_TRUSTSTORE_PASSWORD = "ssl-truststore-password"; |
| /** |
| * The static String definition of the <i>"ssl-default-alias"</i> property |
| * |
| * <U>Description</U>This property will be set when using multi-key keystores. This will define |
| * the alias that the ssl connection factory would use when no alias has been set for the |
| * different component aliases. {@link #SSL_CLUSTER_ALIAS}, |
| * {@link #SSL_SERVER_ALIAS},{@link #SSL_LOCATOR_ALIAS},{@link #SSL_GATEWAY_ALIAS},{@link #SSL_JMX_ALIAS} |
| * , {@link #SSL_WEB_ALIAS} |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_DEFAULT_ALIAS = "ssl-default-alias"; |
| /** |
| * The static String definition of the <i>"ssl-web-require-authentication"</i> property |
| * |
| * <U>Description</U>If false allows client side's http connection to be authenticated without a |
| * 2-way SSL authentication. |
| * </p> |
| * <U>Default</U>: "false" |
| * </p> |
| * <U>Since</U>: Geode 1.0 |
| */ |
| String SSL_WEB_SERVICE_REQUIRE_AUTHENTICATION = "ssl-web-require-authentication"; |
| |
| /** |
| * The static String definition of the <i>"ssl-parameter-extension"</i> property |
| * |
| * <U>Description</U>SSLParameterExtension module name for Clients that want to use SSL Parameter |
| * extensions. |
| * Module must implement SSLParameterExtension interface. |
| * </p> |
| * <U>Default</U>: "" |
| * </p> |
| * <U>Since</U>: Geode 1.12 |
| * </p> |
| * <U>Allowed values</U>: class name |
| */ |
| String SSL_PARAMETER_EXTENSION = "ssl-parameter-extension"; |
| |
| /** |
| * The static String definition of the <i>"validate-serializable-objects"</i> property |
| * |
| * <U>Description</U>If true checks incoming java serializable objects against a filter (allows |
| * internal Geode classes and any others provided in the serializable-object-filter property). |
| * </p> |
| * <U>Default</U>: "false" |
| * </p> |
| * <U>Since</U>: Geode 1.4 |
| */ |
| String VALIDATE_SERIALIZABLE_OBJECTS = "validate-serializable-objects"; |
| /** |
| * The static String definition of the <i>"serializable-object-filter"</i> property |
| * |
| * <U>Description</U>A user provided acceptlist of objects that the system will allow to |
| * serialize. |
| * |
| * <p> |
| * See java.io.ObjectInputFilter.Config for details on the syntax for creating filters. |
| * https://docs.oracle.com/javase/9/docs/api/java/io/ObjectInputFilter.Config.html |
| * </p> |
| * </p> |
| * <U>Default</U>: "!*" |
| * </p> |
| * <U>Since</U>: Geode 1.4 |
| * |
| */ |
| String SERIALIZABLE_OBJECT_FILTER = "serializable-object-filter"; |
| /** |
| * The static String definition of the <i>"thread-monitor-enabled"</i> property <a |
| * name="thread-monitor-enabled"/a> |
| * <p> |
| * <U>Description</U>: Defines whether thread monitoring is to be enabled. |
| * <p> |
| * <U>Default</U>: "true" |
| * <p> |
| * <U>Allowed values</U>: false/true |
| * <p> |
| */ |
| String THREAD_MONITOR_ENABLED = "thread-monitor-enabled"; |
| /** |
| * The static String definition of the <i>"thread-monitor-interval-ms"</i> property <a |
| * name="thread-monitor-interval-ms"/a> |
| * <p> |
| * <U>Description</U>: Defines the time interval (in milliseconds) with which thread monitoring is |
| * scheduled to run. |
| * <p> |
| * <U>Default</U>: "60000" |
| * <p> |
| */ |
| String THREAD_MONITOR_INTERVAL = "thread-monitor-interval-ms"; |
| /** |
| * The static String definition of the <i>"thread-monitor-time-limit-ms"</i> property <a |
| * name="thread-monitor-time-limit-ms"/a> |
| * <p> |
| * <U>Description</U>: Defines the time period (in milliseconds) after which the monitored thread |
| * is considered to be stuck. |
| * <p> |
| * <U>Default</U>: "30000" |
| * <p> |
| */ |
| String THREAD_MONITOR_TIME_LIMIT = "thread-monitor-time-limit-ms"; |
| } |