ansible/roles/filebeat/templates/filebeat.reference.yml

#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,e
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

######################## Filebeat Configuration ############################

# This file is a full configuration example documenting all non-deprecated
# options in comments. For a shorter configuration example, that contains only
# the most common options, please see filebeat.yml in the same directory.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html

#==========================  Modules configuration =============================
filebeat.modules:
  #-------------------------------- System Module --------------------------------
  #- module: system
  # Syslog
  #syslog:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  # Authorization logs
  #auth:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  #-------------------------------- Apache Module --------------------------------
  #- module: apache
  # Access logs
  #access:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  # Error logs
  #error:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  #-------------------------------- Auditd Module --------------------------------
  #- module: auditd
  #log:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  #---------------------------- Elasticsearch Module ----------------------------
  - module: elasticsearch
    # Server log
    server:
      enabled: true
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:

    gc:
      enabled: true
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:

    audit:
      enabled: true
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:

    slowlog:
      enabled: true
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:

    deprecation:
      enabled: true
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:

  #------------------------------- HAProxy Module -------------------------------
  - module: haproxy
    # All logs
    log:
      enabled: true
      # Set which input to use between syslog (default) or file.
      #var.input:
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:

  #-------------------------------- Icinga Module --------------------------------
  #- module: icinga
  # Main logs
  #main:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  # Debug logs
  #debug:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  # Startup logs
  #startup:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  #--------------------------------- IIS Module ---------------------------------
  #- module: iis
  # Access logs
  #access:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  # Error logs
  #error:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  #-------------------------------- Kafka Module --------------------------------
  - module: kafka
    # All logs
    log:
      enabled: true
      # Set custom paths for Kafka. If left empty,
      # Filebeat will look under /opt.
      #var.kafka_home:
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:

  #-------------------------------- Kibana Module --------------------------------
  - module: kibana
    # All logs
    log:
      enabled: true
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:

  #------------------------------- Logstash Module -------------------------------
  #- module: logstash
  # logs
  #log:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  # var.paths:

  # Slow logs
  #slowlog:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  #------------------------------- Mongodb Module -------------------------------
  #- module: mongodb
  # Logs
  #log:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  #-------------------------------- MySQL Module --------------------------------
  #- module: mysql
  # Error logs
  #error:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  # Slow logs
  #slowlog:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  #--------------------------------- NATS Module ---------------------------------
  - module: nats
    # All logs
    log:
      enabled: true
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:

  #-------------------------------- Nginx Module --------------------------------
  #- module: nginx
  # Access logs
  #access:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  # Error logs
  #error:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  # Ingress-nginx controller logs. This is disabled by default. It could be used in Kubernetes environments to parse ingress-nginx logs
  #ingress_controller:
  #  enabled: false
  #
  #  # Set custom paths for the log files. If left empty,
  #  # Filebeat will choose the paths depending on your OS.
  #  #var.paths:

  #------------------------------- Osquery Module -------------------------------
  - module: osquery
    result:
      enabled: true
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the paths depending on your OS.
      #var.paths:
      # If true, all fields created by this module are prefixed with
      # `osquery.result`. Set to false to copy the fields in the root
      # of the document. The default is true.
      #var.use_namespace: true

  #------------------------------ PostgreSQL Module ------------------------------
  #- module: postgresql
  # Logs
  #log:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths:

  # Input configuration (advanced). Any input configuration option
  # can be added under this section.
  #input:

  #-------------------------------- Redis Module --------------------------------
  #- module: redis
  # Main logs
  #log:
  #enabled: true

  # Set custom paths for the log files. If left empty,
  # Filebeat will choose the paths depending on your OS.
  #var.paths: ["/var/log/redis/redis-server.log*"]

  # Slow logs, retrieved via the Redis API (SLOWLOG)
  #slowlog:
  #enabled: true

  # The Redis hosts to connect to.
  #var.hosts: ["localhost:6379"]

  # Optional, the password to use when connecting to Redis.
  #var.password:

  #----------------------------- Google Santa Module -----------------------------
  - module: santa
    log:
      enabled: true
      # Set custom paths for the log files. If left empty,
      # Filebeat will choose the the default path.
      #var.paths:

#------------------------------- Traefik Module -------------------------------
#- module: traefik
# Access logs
#access:
#enabled: true

# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:

# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:

#=========================== Filebeat inputs =============================

# List of inputs to fetch data.
filebeat.inputs:
  # Each - is an input. Most options can be set at the input level, so
  # you can use different inputs for various configurations.
  # Below are the input specific configurations.

  # Type of the files. Based on this the way the file is read is decided.
  # The different types cannot be mixed in one input
  #
  # Possible options are:
  # * log: Reads every line of the log file (default)
  # * stdin: Reads the standard in

  #------------------------------ Log input --------------------------------
  - type: log

    # Change to true to enable this input configuration.
    enabled: false

    # Paths that should be crawled and fetched. Glob based paths.
    # To fetch all ".log" files from a specific level of subdirectories
    # /var/log/*/*.log can be used.
    # For each file found under this path, a harvester is started.
    # Make sure not file is defined twice as this can lead to unexpected behaviour.
    paths:
      - /var/log/*.log
      #- c:\programdata\elasticsearch\logs\*

    # Configure the file encoding for reading files with international characters
    # following the W3C recommendation for HTML5 (http://www.w3.org/TR/encoding).
    # Some sample encodings:
    #   plain, utf-8, utf-16be-bom, utf-16be, utf-16le, big5, gb18030, gbk,
    #    hz-gb-2312, euc-kr, euc-jp, iso-2022-jp, shift-jis, ...
    #encoding: plain

    # Exclude lines. A list of regular expressions to match. It drops the lines that are
    # matching any regular expression from the list. The include_lines is called before
    # exclude_lines. By default, no lines are dropped.
    #exclude_lines: ['^DBG']

    # Include lines. A list of regular expressions to match. It exports the lines that are
    # matching any regular expression from the list. The include_lines is called before
    # exclude_lines. By default, all the lines are exported.
    #include_lines: ['^ERR', '^WARN']

    # Exclude files. A list of regular expressions to match. Filebeat drops the files that
    # are matching any regular expression from the list. By default, no files are dropped.
    #exclude_files: ['.gz$']

    # Optional additional fields. These fields can be freely picked
    # to add additional information to the crawled log files for filtering
    #fields:
    #  level: debug
    #  review: 1

    # Set to true to store the additional fields as top level fields instead
    # of under the "fields" sub-dictionary. In case of name conflicts with the
    # fields added by Filebeat itself, the custom fields overwrite the default
    # fields.
    #fields_under_root: false

    # Set to true to publish fields with null values in events.
    #keep_null: false

    # Ignore files which were modified more then the defined timespan in the past.
    # ignore_older is disabled by default, so no files are ignored by setting it to 0.
    # Time strings like 2h (2 hours), 5m (5 minutes) can be used.
    #ignore_older: 0

    # How often the input checks for new files in the paths that are specified
    # for harvesting. Specify 1s to scan the directory as frequently as possible
    # without causing Filebeat to scan too frequently. Default: 10s.
    #scan_frequency: 10s

    # Defines the buffer size every harvester uses when fetching the file
    #harvester_buffer_size: 16384

    # Maximum number of bytes a single log event can have
    # All bytes after max_bytes are discarded and not sent. The default is 10MB.
    # This is especially useful for multiline log messages which can get large.
    #max_bytes: 10485760

    # Characters which separate the lines. Valid values: auto, line_feed, vertical_tab, form_feed,
    # carriage_return, carriage_return_line_feed, next_line, line_separator, paragraph_separator.
    #line_terminator: auto

    ### Recursive glob configuration

    # Expand "**" patterns into regular glob patterns.
    #recursive_glob.enabled: true

    ### JSON configuration

    # Decode JSON options. Enable this if your logs are structured in JSON.
    # JSON key on which to apply the line filtering and multiline settings. This key
    # must be top level and its value must be string, otherwise it is ignored. If
    # no text key is defined, the line filtering and multiline features cannot be used.
    #json.message_key:

    # By default, the decoded JSON is placed under a "json" key in the output document.
    # If you enable this setting, the keys are copied top level in the output document.
    #json.keys_under_root: false

    # If keys_under_root and this setting are enabled, then the values from the decoded
    # JSON object overwrite the fields that Filebeat normally adds (type, source, offset, etc.)
    # in case of conflicts.
    #json.overwrite_keys: false

    # If this setting is enabled, Filebeat adds a "error.message" and "error.key: json" key in case of JSON
    # unmarshaling errors or when a text key is defined in the configuration but cannot
    # be used.
    #json.add_error_key: false

    ### Multiline options

    # Multiline can be used for log messages spanning multiple lines. This is common
    # for Java Stack Traces or C-Line Continuation

    # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
    #multiline.pattern: ^\[

    # Defines if the pattern set under pattern should be negated or not. Default is false.
    #multiline.negate: false

    # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
    # that was (not) matched before or after or as long as a pattern is not matched based on negate.
    # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
    #multiline.match: after

    # The maximum number of lines that are combined to one event.
    # In case there are more the max_lines the additional lines are discarded.
    # Default is 500
    #multiline.max_lines: 500

    # After the defined timeout, an multiline event is sent even if no new pattern was found to start a new event
    # Default is 5s.
    #multiline.timeout: 5s

    # Setting tail_files to true means filebeat starts reading new files at the end
    # instead of the beginning. If this is used in combination with log rotation
    # this can mean that the first entries of a new file are skipped.
    #tail_files: false

    # The Ingest Node pipeline ID associated with this input. If this is set, it
    # overwrites the pipeline option from the Elasticsearch output.
    #pipeline:

    # If symlinks is enabled, symlinks are opened and harvested. The harvester is opening the
    # original for harvesting but will report the symlink name as source.
    #symlinks: false

    # Backoff values define how aggressively filebeat crawls new files for updates
    # The default values can be used in most cases. Backoff defines how long it is waited
    # to check a file again after EOF is reached. Default is 1s which means the file
    # is checked every second if new lines were added. This leads to a near real time crawling.
    # Every time a new line appears, backoff is reset to the initial value.
    #backoff: 1s

    # Max backoff defines what the maximum backoff time is. After having backed off multiple times
    # from checking the files, the waiting time will never exceed max_backoff independent of the
    # backoff factor. Having it set to 10s means in the worst case a new line can be added to a log
    # file after having backed off multiple times, it takes a maximum of 10s to read the new line
    #max_backoff: 10s

    # The backoff factor defines how fast the algorithm backs off. The bigger the backoff factor,
    # the faster the max_backoff value is reached. If this value is set to 1, no backoff will happen.
    # The backoff value will be multiplied each time with the backoff_factor until max_backoff is reached
    #backoff_factor: 2

    # Max number of harvesters that are started in parallel.
    # Default is 0 which means unlimited
    #harvester_limit: 0

    ### Harvester closing options

    # Close inactive closes the file handler after the predefined period.
    # The period starts when the last line of the file was, not the file ModTime.
    # Time strings like 2h (2 hours), 5m (5 minutes) can be used.
    #close_inactive: 5m

    # Close renamed closes a file handler when the file is renamed or rotated.
    # Note: Potential data loss. Make sure to read and understand the docs for this option.
    #close_renamed: false

    # When enabling this option, a file handler is closed immediately in case a file can't be found
    # any more. In case the file shows up again later, harvesting will continue at the last known position
    # after scan_frequency.
    #close_removed: true

    # Closes the file handler as soon as the harvesters reaches the end of the file.
    # By default this option is disabled.
    # Note: Potential data loss. Make sure to read and understand the docs for this option.
    #close_eof: false

    ### State options

    # Files for the modification data is older then clean_inactive the state from the registry is removed
    # By default this is disabled.
    #clean_inactive: 0

    # Removes the state for file which cannot be found on disk anymore immediately
    #clean_removed: true

    # Close timeout closes the harvester after the predefined time.
    # This is independent if the harvester did finish reading the file or not.
    # By default this option is disabled.
    # Note: Potential data loss. Make sure to read and understand the docs for this option.
    #close_timeout: 0

    # Defines if inputs is enabled
    #enabled: true

#----------------------------- Stdin input -------------------------------
# Configuration to use stdin input
#- type: stdin

#------------------------- Redis slowlog input ---------------------------
# Experimental: Config options for the redis slow log input
#- type: redis
#enabled: false

# List of hosts to pool to retrieve the slow log information.
#hosts: ["localhost:6379"]

# How often the input checks for redis slow log.
#scan_frequency: 10s

# Timeout after which time the input should return an error
#timeout: 1s

# Network type to be used for redis connection. Default: tcp
#network: tcp

# Max number of concurrent connections. Default: 10
#maxconn: 10

# Redis AUTH password. Empty by default.
#password: foobared

#------------------------------ Udp input --------------------------------
# Experimental: Config options for the udp input
#- type: udp
#enabled: false

# Maximum size of the message received over UDP
#max_message_size: 10KiB

# Size of the UDP read buffer in bytes
#read_buffer: 0

#------------------------------ TCP input --------------------------------
# Experimental: Config options for the TCP input
#- type: tcp
#enabled: false

# The host and port to receive the new event
#host: "localhost:9000"

# Character used to split new message
#line_delimiter: "\n"

# Maximum size in bytes of the message received over TCP
#max_message_size: 20MiB

# Max number of concurrent connections, or 0 for no limit. Default: 0
#max_connections: 0

# The number of seconds of inactivity before a remote connection is closed.
#timeout: 300s

# Use SSL settings for TCP.
#ssl.enabled: true

# List of supported/valid TLS versions. By default all TLS versions 1.0 up to
# 1.2 are enabled.
#ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

# SSL configuration. By default is off.
# List of root certificates for client verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

# Certificate for SSL server authentication.
#ssl.certificate: "/etc/pki/client/cert.pem"

# Server Certificate Key,
#ssl.key: "/etc/pki/client/cert.key"

# Optional passphrase for decrypting the Certificate Key.
#ssl.key_passphrase: ''

# Configure cipher suites to be used for SSL connections.
#ssl.cipher_suites: []

# Configure curve types for ECDHE based cipher suites.
#ssl.curve_types: []

# Configure what types of client authentication are supported. Valid options
# are `none`, `optional`, and `required`. When `certificate_authorities` is set it will
# default to `required` otherwise it will be set to `none`.
#ssl.client_authentication: "required"

#------------------------------ Syslog input --------------------------------
# Experimental: Config options for the Syslog input
# Accept RFC3164 formatted syslog event via UDP.
#- type: syslog
#enabled: false
#protocol.udp:
# The host and port to receive the new event
#host: "localhost:9000"

# Maximum size of the message received over UDP
#max_message_size: 10KiB

# Accept RFC3164 formatted syslog event via TCP.
#- type: syslog
#enabled: false

#protocol.tcp:
# The host and port to receive the new event
#host: "localhost:9000"

# Character used to split new message
#line_delimiter: "\n"

# Maximum size in bytes of the message received over TCP
#max_message_size: 20MiB

# The number of seconds of inactivity before a remote connection is closed.
#timeout: 300s

# Use SSL settings for TCP.
#ssl.enabled: true

# List of supported/valid TLS versions. By default all TLS versions 1.0 up to
# 1.2 are enabled.
#ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

# SSL configuration. By default is off.
# List of root certificates for client verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

# Certificate for SSL server authentication.
#ssl.certificate: "/etc/pki/client/cert.pem"

# Server Certificate Key,
#ssl.key: "/etc/pki/client/cert.key"

# Optional passphrase for decrypting the Certificate Key.
#ssl.key_passphrase: ''

# Configure cipher suites to be used for SSL connections.
#ssl.cipher_suites: []

# Configure curve types for ECDHE based cipher suites.
#ssl.curve_types: []

# Configure what types of client authentication are supported. Valid options
# are `none`, `optional`, and `required`. When `certificate_authorities` is set it will
# default to `required` otherwise it will be set to `none`.
#ssl.client_authentication: "required"

#------------------------------ Container input --------------------------------
#- type: container
#enabled: false

# Paths for container logs that should be crawled and fetched.
#paths:
#  -/var/lib/docker/containers/*/*.log

# Configure stream to filter to a specific stream: stdout, stderr or all (default)
#stream: all

#========================== Filebeat autodiscover ==============================

# Autodiscover allows you to detect changes in the system and spawn new modules
# or inputs as they happen.

#filebeat.autodiscover:
# List of enabled autodiscover providers
#  providers:
#    - type: docker
#      templates:
#        - condition:
#            equals.docker.container.image: busybox
#          config:
#            - type: container
#              paths:
#                - /var/lib/docker/containers/${data.docker.container.id}/*.log

#========================= Filebeat global options ============================

# Registry data path. If a relative path is used, it is considered relative to the
# data path.
#filebeat.registry.path: ${path.data}/registry

# The permissions mask to apply on registry data, and meta files. The default
# value is 0600.  Must be a valid Unix-style file permissions mask expressed in
# octal notation.  This option is not supported on Windows.
#filebeat.registry.file_permissions: 0600

# The timeout value that controls when registry entries are written to disk
# (flushed). When an unwritten update exceeds this value, it triggers a write
# to disk. When flush is set to 0s, the registry is written to disk after each
# batch of events has been published successfully. The default value is 0s.
#filebeat.registry.flush: 0s

# Starting with Filebeat 7.0, the registry uses a new directory format to store
# Filebeat state. After you upgrade, Filebeat will automatically migrate a 6.x
# registry file to use the new directory format. If you changed
# filebeat.registry.path while upgrading, set filebeat.registry.migrate_file to
# point to the old registry file.
#filebeat.registry.migrate_file: ${path.data}/registry

# By default Ingest pipelines are not updated if a pipeline with the same ID
# already exists. If this option is enabled Filebeat overwrites pipelines
# everytime a new Elasticsearch connection is established.
#filebeat.overwrite_pipelines: false

# How long filebeat waits on shutdown for the publisher to finish.
# Default is 0, not waiting.
#filebeat.shutdown_timeout: 0

# Enable filebeat config reloading
#filebeat.config:
#inputs:
#enabled: false
#path: inputs.d/*.yml
#reload.enabled: true
#reload.period: 10s
#modules:
#enabled: false
#path: modules.d/*.yml
#reload.enabled: true
#reload.period: 10s

#================================ General ======================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
# If this options is not defined, the hostname is used.
#name:

# The tags of the shipper are included in their own field with each
# transaction published. Tags make it easy to group servers by different
# logical properties.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output. Fields can be scalar values, arrays, dictionaries, or any nested
# combination of these.
#fields:
#  env: staging

# If this option is set to true, the custom fields are stored as top-level
# fields in the output document instead of being grouped under a fields
# sub-dictionary. Default is false.
#fields_under_root: false

# Internal queue configuration for buffering events to be published.
#queue:
# Queue type by name (default 'mem')
# The memory queue will present all available events (up to the outputs
# bulk_max_size) to the output, the moment the output is ready to server
# another batch of events.
#mem:
# Max number of events the queue can buffer.
#events: 4096

# Hints the minimum number of events stored in the queue,
# before providing a batch of events to the outputs.
# The default value is set to 2048.
# A value of 0 ensures events are immediately available
# to be sent to the outputs.
#flush.min_events: 2048

# Maximum duration after which events are available to the outputs,
# if the number of events stored in the queue is < `flush.min_events`.
#flush.timeout: 1s

# The spool queue will store events in a local spool file, before
# forwarding the events to the outputs.
#
# Beta: spooling to disk is currently a beta feature. Use with care.
#
# The spool file is a circular buffer, which blocks once the file/buffer is full.
# Events are put into a write buffer and flushed once the write buffer
# is full or the flush_timeout is triggered.
# Once ACKed by the output, events are removed immediately from the queue,
# making space for new events to be persisted.
#spool:
# The file namespace configures the file path and the file creation settings.
# Once the file exists, the `size`, `page_size` and `prealloc` settings
# will have no more effect.
#file:
# Location of spool file. The default value is ${path.data}/spool.dat.
#path: "${path.data}/spool.dat"

# Configure file permissions if file is created. The default value is 0600.
#permissions: 0600

# File size hint. The spool blocks, once this limit is reached. The default value is 100 MiB.
#size: 100MiB

# The files page size. A file is split into multiple pages of the same size. The default value is 4KiB.
#page_size: 4KiB

# If prealloc is set, the required space for the file is reserved using
# truncate. The default value is true.
#prealloc: true

# Spool writer settings
# Events are serialized into a write buffer. The write buffer is flushed if:
# - The buffer limit has been reached.
# - The configured limit of buffered events is reached.
# - The flush timeout is triggered.
#write:
# Sets the write buffer size.
#buffer_size: 1MiB

# Maximum duration after which events are flushed if the write buffer
# is not full yet. The default value is 1s.
#flush.timeout: 1s

# Number of maximum buffered events. The write buffer is flushed once the
# limit is reached.
#flush.events: 16384

# Configure the on-disk event encoding. The encoding can be changed
# between restarts.
# Valid encodings are: json, ubjson, and cbor.
#codec: cbor
#read:
# Reader flush timeout, waiting for more events to become available, so
# to fill a complete batch as required by the outputs.
# If flush_timeout is 0, all available events are forwarded to the
# outputs immediately.
# The default value is 0s.
#flush.timeout: 0s

# Sets the maximum number of CPUs that can be executing simultaneously. The
# default is the number of logical CPUs available in the system.
#max_procs:

#================================ Processors ===================================

# Processors are used to reduce the number of fields in the exported event or to
# enhance the event with external metadata. This section defines a list of
# processors that are applied one by one and the first one receives the initial
# event:
#
#   event -> filter1 -> event1 -> filter2 ->event2 ...
#
# The supported processors are drop_fields, drop_event, include_fields,
# decode_json_fields, and add_cloud_metadata.
#
# For example, you can use the following processors to keep the fields that
# contain CPU load percentages, but remove the fields that contain CPU ticks
# values:
#
#processors:
#  - include_fields:
#      fields: ["cpu"]
#  - drop_fields:
#      fields: ["cpu.user", "cpu.system"]
#
# The following example drops the events that have the HTTP response code 200:
#
#processors:
#  - drop_event:
#      when:
#        equals:
#          http.code: 200
#
# The following example renames the field a to b:
#
#processors:
#  - rename:
#      fields:
#        - from: "a"
#          to: "b"
#
# The following example tokenizes the string into fields:
#
#processors:
#  - dissect:
#      tokenizer: "%{key1} - %{key2}"
#      field: "message"
#      target_prefix: "dissect"
#
# The following example enriches each event with metadata from the cloud
# provider about the host machine. It works on EC2, GCE, DigitalOcean,
# Tencent Cloud, and Alibaba Cloud.
#
#processors:
#  - add_cloud_metadata: ~
#
# The following example enriches each event with the machine's local time zone
# offset from UTC.
#
#processors:
#  - add_locale:
#      format: offset
#
# The following example enriches each event with docker metadata, it matches
# given fields to an existing container id and adds info from that container:
#
#processors:
#  - add_docker_metadata:
#      host: "unix:///var/run/docker.sock"
#      match_fields: ["system.process.cgroup.id"]
#      match_pids: ["process.pid", "process.ppid"]
#      match_source: true
#      match_source_index: 4
#      match_short_id: false
#      cleanup_timeout: 60
#      labels.dedot: false
#      # To connect to Docker over TLS you must specify a client and CA certificate.
#      #ssl:
#      #  certificate_authority: "/etc/pki/root/ca.pem"
#      #  certificate:           "/etc/pki/client/cert.pem"
#      #  key:                   "/etc/pki/client/cert.key"
#
# The following example enriches each event with docker metadata, it matches
# container id from log path available in `source` field (by default it expects
# it to be /var/lib/docker/containers/*/*.log).
#
#processors:
#  - add_docker_metadata: ~
#
# The following example enriches each event with host metadata.
#
#processors:
#  - add_host_metadata: ~
#
# The following example enriches each event with process metadata using
# process IDs included in the event.
#
#processors:
#  - add_process_metadata:
#      match_pids: ["system.process.ppid"]
#      target: system.process.parent
#
# The following example decodes fields containing JSON strings
# and replaces the strings with valid JSON objects.
#
#processors:
#  - decode_json_fields:
#      fields: ["field1", "field2", ...]
#      process_array: false
#      max_depth: 1
#      target: ""
#      overwrite_keys: false
#
#processors:
#  - decompress_gzip_field:
#      from: "field1"
#      to: "field2"
#      ignore_missing: false
#      fail_on_error: true
#
# The following example copies the value of message to message_copied
#
#processors:
#  - copy_fields:
#      fields:
#        - from: message
#          to: message_copied
#      fail_on_error: true
#      ignore_missing: false
#
# The following example truncates the value of message to 1024 bytes
#
#processors:
#  - truncate_fields:
#      fields:
#        - message
#      max_bytes: 1024
#      fail_on_error: false
#      ignore_missing: true
#
# The following example preserves the raw message under event.original
#
#processors:
#  - copy_fields:
#      fields:
#        - from: message
#          to: event.original
#      fail_on_error: false
#      ignore_missing: true
#  - truncate_fields:
#      fields:
#        - event.original
#      max_bytes: 1024
#      fail_on_error: false
#      ignore_missing: true

#============================= Elastic Cloud ==================================

# These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:

#================================ Outputs ======================================

# Configure what output to use when sending the data collected by the beat.

#-------------------------- Elasticsearch output -------------------------------
output.elasticsearch:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Array of hosts to connect to.
  # Scheme and port can be left out and will be set to the default (http and 9200)
  # In case you specify and additional path, the scheme is required: http://localhost:9200/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
  hosts: ["localhost:9200"]

  # Set gzip compression level.
  #compression_level: 0
  # Configure escaping HTML symbols in strings.
  #escape_html: false
  # Protocol - either `http` (default) or `https`.
  #protocol: "https"
  # Authentication credentials - either API key or username/password.
  #api_key: "id:api_key"
  #username: "elastic"
  #password: "changeme"
  # Dictionary of HTTP parameters to pass within the URL with index operations.
  #parameters:
  #param1: value1
  #param2: value2
  # Number of workers per Elasticsearch host.
  #worker: 1
  # Optional index name. The default is "filebeat" plus date
  # and generates [filebeat-]YYYY.MM.DD keys.
  # In case you modify this pattern you must update setup.template.name and setup.template.pattern accordingly.
  #index: "filebeat-%{[agent.version]}-%{+yyyy.MM.dd}"
  # Optional ingest node pipeline. By default no pipeline will be used.
  #pipeline: ""
  # Optional HTTP path
  #path: "/elasticsearch"
  # Custom HTTP headers to add to each request
  #headers:
  #  X-My-Header: Contents of the header
  # Proxy server URL
  #proxy_url: http://proxy:3128
  # Whether to disable proxy settings for outgoing connections. If true, this
  # takes precedence over both the proxy_url field and any environment settings
  # (HTTP_PROXY, HTTPS_PROXY). The default is false.
  #proxy_disable: false
  # The number of times a particular Elasticsearch index operation is attempted. If
  # the indexing operation doesn't succeed after this many retries, the events are
  # dropped. The default is 3.
  #max_retries: 3
  # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
  # The default is 50.
  #bulk_max_size: 50
  # The number of seconds to wait before trying to reconnect to Elasticsearch
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s
  # The maximum number of seconds to wait before attempting to connect to
  # Elasticsearch after a network error. The default is 60s.
  #backoff.max: 60s
  # Configure HTTP request timeout before failing a request to Elasticsearch.
  #timeout: 90
  # Use SSL settings for HTTPS.
  #ssl.enabled: true
  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL-based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full
  # List of supported/valid TLS versions. By default all TLS versions from 1.1
  # up to 1.3 are enabled.
  #ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"
  # Client certificate key
  #ssl.key: "/etc/pki/client/cert.key"
  # Optional passphrase for decrypting the certificate key.
  #ssl.key_passphrase: ''
  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []
  # Configure curve types for ECDHE-based cipher suites
  #ssl.curve_types: []
  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never
  # Configure a pin that can be used to do extra validation of the verified certificate chain,
  # this allow you to ensure that a specific certificate is used to validate the chain of trust.
  #
  # The pin is a base64 encoded string of the SHA-256 fingerprint.
  #ssl.ca_sha256

#----------------------------- Logstash output ---------------------------------
output.logstash:
  # Boolean flag to enable or disable the output module.
  enabled: true

  # The Logstash hosts
  hosts: ["localhost:5044"]

  # Number of workers per Logstash host.
  worker: 1

  # Set gzip compression level.
  compression_level: 3

  # Configure escaping HTML symbols in strings.
  escape_html: false

  # Optional maximum time to live for a connection to Logstash, after which the
  # connection will be re-established.  A value of `0s` (the default) will
  # disable this feature.
  #
  # Not yet supported for async connections (i.e. with the "pipelining" option set)
  #ttl: 30s

  # Optionally load-balance events between Logstash hosts. Default is false.
  #loadbalance: false

  # Number of batches to be sent asynchronously to Logstash while processing
  # new batches.
  pipelining: 2

  # If enabled only a subset of events in a batch of events is transferred per
  # transaction.  The number of events to be sent increases up to `bulk_max_size`
  # if no error is encountered.
  slow_start: false

  # The number of seconds to wait before trying to reconnect to Logstash
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Logstash after a network error. The default is 60s.
  backoff.max: 60s

  # Optional index name. The default index name is set to filebeat
  # in all lowercase.
  index: "filebeat"

  # SOCKS5 proxy server URL
  #proxy_url: socks5://user:password@socks5-server:2233

  # Resolve names locally when using a proxy server. Defaults to false.
  #proxy_use_local_resolver: false

  # Enable SSL support. SSL is automatically enabled if any SSL setting is set.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions from 1.1
  # up to 1.3 are enabled.
  #ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

  # Optional SSL configuration options. SSL is off by default.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client certificate key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE-based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  # Configure a pin that can be used to do extra validation of the verified certificate chain,
  # this allow you to ensure that a specific certificate is used to validate the chain of trust.
  #
  # The pin is a base64 encoded string of the SHA-256 fingerprint.
  #ssl.ca_sha256

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat and Winlogbeat, ignore the max_retries setting
  # and retry until all events are published.  Set max_retries to a value less
  # than 0 to retry until all events are published. The default is 3.
  max_retries: 3

  # The maximum number of events to bulk in a single Logstash request. The
  # default is 2048.
  bulk_max_size: 2048

  # The number of seconds to wait for responses from the Logstash server before
  # timing out. The default is 30s.
  timeout: 30s

#------------------------------- Kafka output ----------------------------------
#output.kafka:
# Boolean flag to enable or disable the output module.
#enabled: true

# The list of Kafka broker addresses from which to fetch the cluster metadata.
# The cluster metadata contain the actual Kafka brokers events are published
# to.
#hosts: ["localhost:9092"]

# The Kafka topic used for produced events. The setting can be a format string
# using any event field. To set the topic from document type use `%{[type]}`.
#topic: beats

# The Kafka event key setting. Use format string to create a unique event key.
# By default no event key will be generated.
#key: ''

# The Kafka event partitioning strategy. Default hashing strategy is `hash`
# using the `output.kafka.key` setting or randomly distributes events if
# `output.kafka.key` is not configured.
#partition.hash:
# If enabled, events will only be published to partitions with reachable
# leaders. Default is false.
#reachable_only: false

# Configure alternative event field names used to compute the hash value.
# If empty `output.kafka.key` setting will be used.
# Default value is empty list.
#hash: []

# Authentication details. Password is required if username is set.
#username: ''
#password: ''

# Kafka version Filebeat is assumed to run against. Defaults to the "1.0.0".
#version: '1.0.0'

# Configure JSON encoding
#codec.json:
# Pretty-print JSON event
#pretty: false

# Configure escaping HTML symbols in strings.
#escape_html: false

# Metadata update configuration. Metadata contains leader information
# used to decide which broker to use when publishing.
#metadata:
# Max metadata request retry attempts when cluster is in middle of leader
# election. Defaults to 3 retries.
#retry.max: 3

# Wait time between retries during leader elections. Default is 250ms.
#retry.backoff: 250ms

# Refresh metadata interval. Defaults to every 10 minutes.
#refresh_frequency: 10m

# Strategy for fetching the topics metadata from the broker. Default is false.
#full: false

# The number of concurrent load-balanced Kafka output workers.
#worker: 1

# The number of times to retry publishing an event after a publishing failure.
# After the specified number of retries, events are typically dropped.
# Some Beats, such as Filebeat, ignore the max_retries setting and retry until
# all events are published.  Set max_retries to a value less than 0 to retry
# until all events are published. The default is 3.
#max_retries: 3

# The maximum number of events to bulk in a single Kafka request. The default
# is 2048.
#bulk_max_size: 2048

# Duration to wait before sending bulk Kafka request. 0 is no delay. The default
# is 0.
#bulk_flush_frequency: 0s

# The number of seconds to wait for responses from the Kafka brokers before
# timing out. The default is 30s.
#timeout: 30s

# The maximum duration a broker will wait for number of required ACKs. The
# default is 10s.
#broker_timeout: 10s

# The number of messages buffered for each Kafka broker. The default is 256.
#channel_buffer_size: 256

# The keep-alive period for an active network connection. If 0s, keep-alives
# are disabled. The default is 0 seconds.
#keep_alive: 0

# Sets the output compression codec. Must be one of none, snappy and gzip. The
# default is gzip.
#compression: gzip

# Set the compression level. Currently only gzip provides a compression level
# between 0 and 9. The default value is chosen by the compression algorithm.
#compression_level: 4

# The maximum permitted size of JSON-encoded messages. Bigger messages will be
# dropped. The default value is 1000000 (bytes). This value should be equal to
# or less than the broker's message.max.bytes.
#max_message_bytes: 1000000

# The ACK reliability level required from broker. 0=no response, 1=wait for
# local commit, -1=wait for all replicas to commit. The default is 1.  Note:
# If set to 0, no ACKs are returned by Kafka. Messages might be lost silently
# on error.
#required_acks: 1

# The configurable ClientID used for logging, debugging, and auditing
# purposes.  The default is "beats".
#client_id: beats

# Enable SSL support. SSL is automatically enabled if any SSL setting is set.
#ssl.enabled: true

# Optional SSL configuration options. SSL is off by default.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

# Configure SSL verification mode. If `none` is configured, all server hosts
# and certificates will be accepted. In this mode, SSL based connections are
# susceptible to man-in-the-middle attacks. Use only for testing. Default is
# `full`.
#ssl.verification_mode: full

# List of supported/valid TLS versions. By default all TLS versions from 1.1
# up to 1.3 are enabled.
#ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"

# Client Certificate Key
#ssl.key: "/etc/pki/client/cert.key"

# Optional passphrase for decrypting the Certificate Key.
#ssl.key_passphrase: ''

# Configure cipher suites to be used for SSL connections
#ssl.cipher_suites: []

# Configure curve types for ECDHE-based cipher suites
#ssl.curve_types: []

# Configure what types of renegotiation are supported. Valid options are
# never, once, and freely. Default is never.
#ssl.renegotiation: never

# Authentication type to use with Kerberos. Available options: keytab, password.
#kerberos.auth_type: password

# Path to the keytab file. It is used when auth_type is set to keytab.
#kerberos.keytab: /etc/security/keytabs/kafka.keytab

# Path to the Kerberos configuration.
#kerberos.config_path: /etc/krb5.conf

# The service name. Service principal name is contructed from
# service_name/hostname@realm.
#kerberos.service_name: kafka

# Name of the Kerberos user.
#kerberos.username: elastic

# Password of the Kerberos user. It is used when auth_type is set to password.
#kerberos.password: changeme

# Kerberos realm.
#kerberos.realm: ELASTIC

#------------------------------- Redis output ----------------------------------
#output.redis:
# Boolean flag to enable or disable the output module.
#enabled: true

# Configure JSON encoding
#codec.json:
# Pretty print json event
#pretty: false

# Configure escaping HTML symbols in strings.
#escape_html: false

# The list of Redis servers to connect to. If load-balancing is enabled, the
# events are distributed to the servers in the list. If one server becomes
# unreachable, the events are distributed to the reachable servers only.
# The hosts setting supports redis and rediss urls with custom password like
# redis://:password@localhost:6379.
#hosts: ["localhost:6379"]

# The name of the Redis list or channel the events are published to. The
# default is filebeat.
#key: filebeat

# The password to authenticate to Redis with. The default is no authentication.
#password:

# The Redis database number where the events are published. The default is 0.
#db: 0

# The Redis data type to use for publishing events. If the data type is list,
# the Redis RPUSH command is used. If the data type is channel, the Redis
# PUBLISH command is used. The default value is list.
#datatype: list

# The number of workers to use for each host configured to publish events to
# Redis. Use this setting along with the loadbalance option. For example, if
# you have 2 hosts and 3 workers, in total 6 workers are started (3 for each
# host).
#worker: 1

# If set to true and multiple hosts or workers are configured, the output
# plugin load balances published events onto all Redis hosts. If set to false,
# the output plugin sends all events to only one host (determined at random)
# and will switch to another host if the currently selected one becomes
# unreachable. The default value is true.
#loadbalance: true

# The Redis connection timeout in seconds. The default is 5 seconds.
#timeout: 5s

# The number of times to retry publishing an event after a publishing failure.
# After the specified number of retries, the events are typically dropped.
# Some Beats, such as Filebeat, ignore the max_retries setting and retry until
# all events are published. Set max_retries to a value less than 0 to retry
# until all events are published. The default is 3.
#max_retries: 3

# The number of seconds to wait before trying to reconnect to Redis
# after a network error. After waiting backoff.init seconds, the Beat
# tries to reconnect. If the attempt fails, the backoff timer is increased
# exponentially up to backoff.max. After a successful connection, the backoff
# timer is reset. The default is 1s.
#backoff.init: 1s

# The maximum number of seconds to wait before attempting to connect to
# Redis after a network error. The default is 60s.
#backoff.max: 60s

# The maximum number of events to bulk in a single Redis request or pipeline.
# The default is 2048.
#bulk_max_size: 2048

# The URL of the SOCKS5 proxy to use when connecting to the Redis servers. The
# value must be a URL with a scheme of socks5://.
#proxy_url:

# This option determines whether Redis hostnames are resolved locally when
# using a proxy. The default value is false, which means that name resolution
# occurs on the proxy server.
#proxy_use_local_resolver: false

# Enable SSL support. SSL is automatically enabled, if any SSL setting is set.
#ssl.enabled: true

# Configure SSL verification mode. If `none` is configured, all server hosts
# and certificates will be accepted. In this mode, SSL based connections are
# susceptible to man-in-the-middle attacks. Use only for testing. Default is
# `full`.
#ssl.verification_mode: full

# List of supported/valid TLS versions. By default all TLS versions from 1.1
# up to 1.3 are enabled.
#ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

# Optional SSL configuration options. SSL is off by default.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"

# Client Certificate Key
#ssl.key: "/etc/pki/client/cert.key"

# Optional passphrase for decrypting the Certificate Key.
#ssl.key_passphrase: ''

# Configure cipher suites to be used for SSL connections
#ssl.cipher_suites: []

# Configure curve types for ECDHE based cipher suites
#ssl.curve_types: []

# Configure what types of renegotiation are supported. Valid options are
# never, once, and freely. Default is never.
#ssl.renegotiation: never

#------------------------------- File output -----------------------------------
#output.file:
# Boolean flag to enable or disable the output module.
#enabled: true

# Configure JSON encoding
#codec.json:
# Pretty-print JSON event
#pretty: false

# Configure escaping HTML symbols in strings.
#escape_html: false

# Path to the directory where to save the generated files. The option is
# mandatory.
#path: "/tmp/filebeat"

# Name of the generated files. The default is `filebeat` and it generates
# files: `filebeat`, `filebeat.1`, `filebeat.2`, etc.
#filename: filebeat

# Maximum size in kilobytes of each file. When this size is reached, and on
# every Filebeat restart, the files are rotated. The default value is 10240
# kB.
#rotate_every_kb: 10000

# Maximum number of files under path. When this number of files is reached,
# the oldest file is deleted and the rest are shifted from last to first. The
# default is 7 files.
#number_of_files: 7

# Permissions to use for file creation. The default is 0600.
#permissions: 0600

#----------------------------- Console output ---------------------------------
#output.console:
# Boolean flag to enable or disable the output module.
#enabled: true

# Configure JSON encoding
#codec.json:
# Pretty-print JSON event
#pretty: false

# Configure escaping HTML symbols in strings.
#escape_html: false

#================================= Paths ======================================

# The home path for the Filebeat installation. This is the default base path
# for all other path settings and for miscellaneous files that come with the
# distribution (for example, the sample dashboards).
# If not set by a CLI flag or in the configuration file, the default for the
# home path is the location of the binary.
path.home: /usr/share/filebeat/

# The configuration path for the Filebeat installation. This is the default
# base path for configuration files, including the main YAML configuration file
# and the Elasticsearch template file. If not set by a CLI flag or in the
# configuration file, the default for the configuration path is the home path.
path.config: /etc/filebeat

# The data path for the Filebeat installation. This is the default base path
# for all the files in which Filebeat needs to store its data. If not set by a
# CLI flag or in the configuration file, the default for the data path is a data
# subdirectory inside the home path.
path.data: /usr/share/filebeat

# The logs path for a Filebeat installation. This is the default location for
# the Beat's log files. If not set by a CLI flag or in the configuration file,
# the default for the logs path is a logs subdirectory inside the home path.
path.logs: ${path.home}/logs

#================================ Keystore ==========================================
# Location of the Keystore containing the keys and their sensitive values.
#keystore.path: "${path.config}/beats.keystore"

#============================== Dashboards =====================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards are disabled by default and can be enabled either by setting the
# options here, or by using the `-setup` CLI flag or the `setup` command.
#setup.dashboards.enabled: false

# The directory from where to read the dashboards. The default is the `kibana`
# folder in the home path.
#setup.dashboards.directory: ${path.home}/kibana

# The URL from where to download the dashboards archive. It is used instead of
# the directory if it has a value.
#setup.dashboards.url:

# The file archive (zip file) from where to read the dashboards. It is used instead
# of the directory when it has a value.
#setup.dashboards.file:

# In case the archive contains the dashboards from multiple Beats, this lets you
# select which one to load. You can load all the dashboards in the archive by
# setting this to the empty string.
#setup.dashboards.beat: filebeat

# The name of the Kibana index to use for setting the configuration. Default is ".kibana"
#setup.dashboards.kibana_index: .kibana

# The Elasticsearch index name. This overwrites the index name defined in the
# dashboards and index pattern. Example: testbeat-*
#setup.dashboards.index:

# Always use the Kibana API for loading the dashboards instead of autodetecting
# how to install the dashboards by first querying Elasticsearch.
#setup.dashboards.always_kibana: false

# If true and Kibana is not reachable at the time when dashboards are loaded,
# it will retry to reconnect to Kibana instead of exiting with an error.
#setup.dashboards.retry.enabled: false

# Duration interval between Kibana connection retries.
#setup.dashboards.retry.interval: 1s

# Maximum number of retries before exiting with an error, 0 for unlimited retrying.
#setup.dashboards.retry.maximum: 0

#============================== Template =====================================

# A template is used to set the mapping in Elasticsearch
# By default template loading is enabled and the template is loaded.
# These settings can be adjusted to load your own template or overwrite existing ones.

# Set to false to disable template loading.
#setup.template.enabled: true

# Template name. By default the template name is "filebeat-%{[agent.version]}"
# The template name and pattern has to be set in case the Elasticsearch index pattern is modified.
#setup.template.name: "filebeat-%{[agent.version]}"

# Template pattern. By default the template pattern is "-%{[agent.version]}-*" to apply to the default index settings.
# The first part is the version of the beat and then -* is used to match all daily indices.
# The template name and pattern has to be set in case the Elasticsearch index pattern is modified.
#setup.template.pattern: "filebeat-%{[agent.version]}-*"

# Path to fields.yml file to generate the template
#setup.template.fields: "${path.config}/fields.yml"

# A list of fields to be added to the template and Kibana index pattern. Also
# specify setup.template.overwrite: true to overwrite the existing template.
#setup.template.append_fields:
#- name: field_name
#  type: field_type

# Enable JSON template loading. If this is enabled, the fields.yml is ignored.
#setup.template.json.enabled: false

# Path to the JSON template file
#setup.template.json.path: "${path.config}/template.json"

# Name under which the template is stored in Elasticsearch
#setup.template.json.name: ""

# Overwrite existing template
#setup.template.overwrite: false

# Elasticsearch template settings
setup.template.settings:
  # A dictionary of settings to place into the settings.index dictionary
  # of the Elasticsearch template. For more details, please check
  # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping.html
  #index:
  #number_of_shards: 1
  #codec: best_compression
  # A dictionary of settings for the _source field. For more details, please check
  # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping-source-field.html
  #_source:
  #enabled: false

#============================== Setup ILM =====================================

# Configure index lifecycle management (ILM). These settings create a write
# alias and add additional settings to the index template. When ILM is enabled,
# output.elasticsearch.index is ignored, and the write alias is used to set the
# index name.

# Enable ILM support. Valid values are true, false, and auto. When set to auto
# (the default), the Beat uses index lifecycle management when it connects to a
# cluster that supports ILM; otherwise, it creates daily indices.
#setup.ilm.enabled: auto

# Set the prefix used in the index lifecycle write alias name. The default alias
# name is 'filebeat-%{[agent.version]}'.
#setup.ilm.rollover_alias: "filebeat"

# Set the rollover index pattern. The default is "%{now/d}-000001".
#setup.ilm.pattern: "{now/d}-000001"

# Set the lifecycle policy name. The default policy name is
# 'filebeat'.
#setup.ilm.policy_name: "mypolicy"

# The path to a JSON file that contains a lifecycle policy configuration. Used
# to load your own lifecycle policy.
#setup.ilm.policy_file:

# Disable the check for an existing lifecycle policy. The default is true. If
# you disable this check, set setup.ilm.overwrite: true so the lifecycle policy
# can be installed.
#setup.ilm.check_exists: true

# Overwrite the lifecycle policy at startup. The default is false.
#setup.ilm.overwrite: false

#============================== Kibana =====================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:
  # Kibana Host
  # Scheme and port can be left out and will be set to the default (http and 5601)
  # In case you specify and additional path, the scheme is required: http://localhost:5601/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
  #host: "localhost:5601"
  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"
  # Optional HTTP path
  #path: ""
  # Optional Kibana space ID.
  #space.id: ""
  # Use SSL settings for HTTPS. Default is true.
  #ssl.enabled: true
  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full
  # List of supported/valid TLS versions. By default all TLS versions from 1.1
  # up to 1.3 are enabled.
  #ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]
  # SSL configuration. The default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"
  # Client certificate key
  #ssl.key: "/etc/pki/client/cert.key"
  # Optional passphrase for decrypting the certificate key.
  #ssl.key_passphrase: ''
  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []
  # Configure curve types for ECDHE-based cipher suites
  #ssl.curve_types: []

#================================ Logging ======================================
# There are four options for the log output: file, stderr, syslog, eventlog
# The file output is the default.

# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: info

# Enable debug output for selected components. To enable all selectors use ["*"]
# Other available selectors are "beat", "publish", "service"
# Multiple selectors can be chained.
#logging.selectors: [ ]

# Send all logging output to stderr. The default is false.
#logging.to_stderr: false

# Send all logging output to syslog. The default is false.
#logging.to_syslog: false

# Send all logging output to Windows Event Logs. The default is false.
#logging.to_eventlog: false

# If enabled, Filebeat periodically logs its internal metrics that have changed
# in the last period. For each metric that changed, the delta from the value at
# the beginning of the period is logged. Also, the total values for
# all non-zero internal metrics are logged on shutdown. The default is true.
#logging.metrics.enabled: true

# The period after which to log the internal metrics. The default is 30s.
#logging.metrics.period: 30s

# Logging to rotating files. Set logging.to_files to false to disable logging to
# files.
logging.to_files: true
logging.files:
  # Configure the path where the logs are written. The default is the logs directory
  # under the home path (the binary location).
  #path: /var/log/filebeat
  # The name of the files where the logs are written to.
  #name: filebeat
  # Configure log file size limit. If limit is reached, log file will be
  # automatically rotated
  #rotateeverybytes: 10485760 # = 10MB
  # Number of rotated log files to keep. Oldest files will be deleted first.
  #keepfiles: 7
  # The permissions mask to apply when rotating log files. The default value is 0600.
  # Must be a valid Unix-style file permissions mask expressed in octal notation.
  #permissions: 0600
  # Enable log file rotation on time intervals in addition to size-based rotation.
  # Intervals must be at least 1s. Values of 1m, 1h, 24h, 7*24h, 30*24h, and 365*24h
  # are boundary-aligned with minutes, hours, days, weeks, months, and years as
  # reported by the local system clock. All other intervals are calculated from the
  # Unix epoch. Defaults to disabled.
  #interval: 0
  # Rotate existing logs on startup rather than appending to the existing
  # file. Defaults to true.
  # rotateonstartup: true
# Set to true to log messages in JSON format.
#logging.json: false

#============================== X-Pack Monitoring ===============================
# Filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster.  This requires xpack monitoring to be enabled in Elasticsearch.  The
# reporting is disabled by default.

# Set to true to enable the monitoring reporter.
#monitoring.enabled: false

# Sets the UUID of the Elasticsearch cluster under which monitoring data for this
# Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch
# is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.
#monitoring.cluster_uuid:

# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well.
# Note that the settings should point to your Elasticsearch *monitoring* cluster.
# Any setting that is not set is automatically inherited from the Elasticsearch
# output configuration, so if you have the Elasticsearch output configured such
# that it is pointing to your Elasticsearch monitoring cluster, you can simply
# uncomment the following line.
#monitoring.elasticsearch:

# Array of hosts to connect to.
# Scheme and port can be left out and will be set to the default (http and 9200)
# In case you specify and additional path, the scheme is required: http://localhost:9200/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
#hosts: ["localhost:9200"]

# Set gzip compression level.
#compression_level: 0

# Protocol - either `http` (default) or `https`.
#protocol: "https"

# Authentication credentials - either API key or username/password.
#api_key: "id:api_key"
#username: "beats_system"
#password: "changeme"

# Dictionary of HTTP parameters to pass within the URL with index operations.
#parameters:
#param1: value1
#param2: value2

# Custom HTTP headers to add to each request
#headers:
#  X-My-Header: Contents of the header

# Proxy server url
#proxy_url: http://proxy:3128

# The number of times a particular Elasticsearch index operation is attempted. If
# the indexing operation doesn't succeed after this many retries, the events are
# dropped. The default is 3.
#max_retries: 3

# The maximum number of events to bulk in a single Elasticsearch bulk API index request.
# The default is 50.
#bulk_max_size: 50

# The number of seconds to wait before trying to reconnect to Elasticsearch
# after a network error. After waiting backoff.init seconds, the Beat
# tries to reconnect. If the attempt fails, the backoff timer is increased
# exponentially up to backoff.max. After a successful connection, the backoff
# timer is reset. The default is 1s.
#backoff.init: 1s

# The maximum number of seconds to wait before attempting to connect to
# Elasticsearch after a network error. The default is 60s.
#backoff.max: 60s

# Configure HTTP request timeout before failing an request to Elasticsearch.
#timeout: 90

# Use SSL settings for HTTPS.
#ssl.enabled: true

# Configure SSL verification mode. If `none` is configured, all server hosts
# and certificates will be accepted. In this mode, SSL based connections are
# susceptible to man-in-the-middle attacks. Use only for testing. Default is
# `full`.
#ssl.verification_mode: full

# List of supported/valid TLS versions. By default all TLS versions from 1.1
# up to 1.3 are enabled.
#ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

# SSL configuration. The default is off.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"

# Client certificate key
#ssl.key: "/etc/pki/client/cert.key"

# Optional passphrase for decrypting the certificate key.
#ssl.key_passphrase: ''

# Configure cipher suites to be used for SSL connections
#ssl.cipher_suites: []

# Configure curve types for ECDHE-based cipher suites
#ssl.curve_types: []

# Configure what types of renegotiation are supported. Valid options are
# never, once, and freely. Default is never.
#ssl.renegotiation: never

#metrics.period: 10s
#state.period: 1m

# The `monitoring.cloud.id` setting overwrites the `monitoring.elasticsearch.hosts`
# setting. You can find the value for this setting in the Elastic Cloud web UI.
#monitoring.cloud.id:

# The `monitoring.cloud.auth` setting overwrites the `monitoring.elasticsearch.username`
# and `monitoring.elasticsearch.password` settings. The format is `<user>:<pass>`.
#monitoring.cloud.auth:

#================================ HTTP Endpoint ======================================
# Each beat can expose internal metrics through a HTTP endpoint. For security
# reasons the endpoint is disabled by default. This feature is currently experimental.
# Stats can be access through http://localhost:5066/stats . For pretty JSON output
# append ?pretty to the URL.

# Defines if the HTTP endpoint is enabled.
#http.enabled: false

# The HTTP endpoint will bind to this hostname, IP address, unix socket or named pipe.
# When using IP addresses, it is recommended to only use localhost.
#http.host: localhost

# Port on which the HTTP endpoint will bind. Default is 5066.
#http.port: 5066

# Define which user should be owning the named pipe.
#http.named_pipe.user:

# Define which the permissions that should be applied to the named pipe, use the Security
# Descriptor Definition Language (SDDL) to define the permission. This option cannot be used with
# `http.user`.
#http.named_pipe.security_descriptor:

#============================= Process Security ================================

# Enable or disable seccomp system call filtering on Linux. Default is enabled.
#seccomp.enabled: true

#================================= Migration ==================================

# This allows to enable 6.7 migration aliases
#migration.6_to_7.enabled: false