| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| |
| # Translation: |
| # |
| # In this file, a couple of messages are split across multiple lines. The main |
| # reason for that is that fdb is a command-line program, so we prefer to keep |
| # messages at less than 80 characters so that they fit in a typical command |
| # window. When translating strings, you can either keep the line breaks in the |
| # same places, or move them, or even remove them altogether if a message will |
| # fit on a single line. |
| |
| defaultBuildName=development |
| about=Apache fdb (Flash Player Debugger) [build ${build}] |
| copyright=Copyright 2013 The Apache Software Foundation. All rights reserved. |
| noResponseException=Player did not respond to the command as expected; command aborted. |
| notSuspendedException=Command cannot be issued while Player is running |
| illegalStateException=Command not valid without a session. |
| illegalMonitorStateException=Command not valid on a running Player. Press 'Enter' key to halt it |
| playerDidNotStop=Player did not stop as expected. Press 'Enter' key to halt it |
| noSuchElementException=Command expected at least one more argument. |
| numberFormatException=Command argument was string, expected integer. |
| socketException=Another Flash debugger is probably running; please close it. Details: '${message}'. |
| versionException=Command not supported in this context. |
| unexpectedError=Unexpected error while processing command. |
| stackTraceFollows=For diagnostic purposes stack trace follows:\ |
| sessionEndedAbruptly=Session ended abruptly. |
| noUriReceived=No URI received from Player |
| noSourceFilesFound=No source files found |
| unknownBreakpointLocation=<unknown> |
| unknownFilename=<unknown> |
| inFunctionAt=in ${functionName}() at\ |
| inSwf=\ in ${swf} |
| inWorker=Worker ${worker} |
| workerRunning=Running |
| workerSuspended=Suspended |
| workerSelected=(Active) |
| mainThread=Main Thread |
| nonRestorable=\ ; Non-restorable from prior session |
| sourceDirectoriesSearched=Source directories searched: |
| attemptingToSuspend=Attempting to suspend Player execution... |
| playerStopped=Player stopped |
| playerRunning=Player running |
| suspendReason_Unknown=Unknown |
| suspendReason_HitBreakpoint=Breakpoint |
| suspendReason_HitWatchpoint=Watch |
| suspendReason_ProgramThrewException=Fault |
| suspendReason_StopRequest=StopRequest |
| suspendReason_ProgramFinishedStepping=Step |
| suspendReason_HaltOpcode=HaltOpcode |
| suspendReason_ScriptHasLoadedIntoFlashPlayer=ScriptLoaded |
| noStackAvailable=No stack available |
| atFilename=\ at\ |
| noVariables=no variables |
| noArguments=no arguments |
| notInValidFrame=Not in a valid frame. Use 'frame' command to return to current one. |
| noLocals=no locals |
| noScopeChain=no scope chain |
| noActiveSession=No active session |
| runWillLaunchUri='run' will launch ${uri} |
| targetUnknown=Target unknown |
| noSWFs=no SWFs. |
| unrecognizedFault=Unrecognized fault. |
| noFunctionsFound=No functions found |
| functionListBeingPrepared=Function list being prepared in background; try again later. |
| functionsInSourceFile=Functions in ${sourceFile} |
| breakpointNotYetResolved=\ (not yet resolved) |
| breakpointAmbiguous=\ (ambiguous) |
| breakpointNoCode=\ (no executable code on the specified line) |
| sessionTerminated=Player session terminated |
| additionalCodeLoaded=Additional ActionScript code has been loaded from a SWF or a frame.\n\ |
| To see all currently loaded files, type 'info files'. |
| workerChanged=Active worker has changed to worker |
| workerNotFound=No worker found with that ID |
| setAdditionalBreakpoints=Set additional breakpoints as desired, and then type 'continue'. |
| fixBreakpoints=Fix or remove bad breakpoints, then type 'continue'. |
| executionHalted=Execution halted |
| hitBreakpoint=Breakpoint ${breakpointNumber} |
| haltedInFunction=${reasonForHalting}, ${functionName}() at ${fileAndLine} |
| haltedInFile=${reasonForHalting}, ${fileAndLine} |
| linePrefixWhenDisplayingConsoleError=[Error] |
| linePrefixWhenDisplayingFault=[Fault] |
| linePrefixWhenWorkerCreated=[WorkerCreate] |
| linePrefixWhenWorkerExit=[WorkerDestroy] |
| linePrefixWhenSwfLoaded=[SWF] |
| linePrefixWhenSwfUnloaded=[UnloadSWF] |
| informationAboutFault=, information= |
| sizeAfterDecompression=${size} bytes after decompression |
| breakpointNotPropagated=WARNING: breakpoint ${breakpointNumber} not propagated to all swfs.\n\ |
| You need to clear it and set it again. |
| playerAlreadyRunning=Player is already running, no need to resume. |
| doYouWantToHalt=Do you want to attempt to halt execution? |
| debugInfoBeingLoaded=debug information currently being loaded |
| attemptingToHalt=Attempting to halt.\n\ |
| To help out, try nudging the Player (e.g. press a button) |
| couldNotHalt=Couldn't halt, no ActionScript is running. |
| escapingFromDebuggerPendingLoop=Escaping from debugger pending loop; setting $nowaiting = 1 |
| continuingDueToError=Continuing due to error '${error}' |
| currentLocationUnknown=current location unknown |
| cannotStep=You can't step now. Set breakpoints and then type 'continue'. |
| abortingStep=The Player has not returned in time; aborting remaining ${count} steps |
| finishCommandNotMeaningfulOnOutermostFrame='finish' not meaningful on outermost frame |
| finishCommandNotMeaningfulWithoutStack='finish' not meaningful without a stack |
| noBreakpointNumber=No breakpoint number ${breakpointNumber} |
| badBreakpointNumber=warning bad breakpoint number at or near '${token}' |
| commandFailed=Command failed. |
| createdBreakpoint=Breakpoint ${breakpointNumber}: file ${file}, line ${line} |
| createdBreakpointWithOffset=Breakpoint ${breakpointNumber} at ${offset}: file ${file}, line ${line} |
| breakpointCreatedButNotYetResolved=Breakpoint ${breakpointNumber} created, but not yet resolved.\n\ |
| The breakpoint will be resolved when the corresponding file or function is loaded. |
| fileNumber=file #${fileNumber} |
| breakpointNotSetNoCode=Breakpoint not set; no executable code at line ${line} of ${filename} |
| breakpointLocationUnknown=Breakpoint location unknown. |
| breakpointNotCleared=Breakpoint not cleared. |
| attemptingToResolve=Attempting to resolve breakpoint ${breakpointNumber}, expression "${expression}": |
| noExecutableCode=There is no executable code on the specified line. |
| resolvedBreakpointToFunction=Resolved breakpoint ${breakpointNumber} to ${functionName}() at ${file}:${line} |
| resolvedBreakpointToFile=Resolved breakpoint ${breakpointNumber} to ${file}:${line} |
| setCommand=Set command requires a variable followed by an expression |
| missingOperator=Expression must contain '${operator}' operator. |
| noSideEffectsAllowed=Expression must not have side effects such as assignment. |
| couldNotEvaluate=Expression could not be evaluated. |
| commandHistoryIsEmpty=The history is empty |
| historyHasNotReached=History has not yet reached ${number} |
| variableUnknown=Variable ${variable} unknown |
| expressionCouldNotBeParsed=Expression could not be parsed correctly: |
| couldNotConvertToNumber=Could not convert to a number: ${value} |
| commandsLimitedToSpecifiedSwf=Commands limited to source files from ${swf} |
| commandsApplyToAllSwfs=Source files from all swfs available within commands. |
| notValidSwf=${swf} is not a valid SWF. |
| frameDoesNotExist=Frame '${frameNumber}' does not exist. |
| notANumber='${token}' not a number. |
| expectedLineNumber=Expected line number; got ${token} |
| expectedFileNumber=Expected file number; got ${token} |
| noSourceFileWithSpecifiedName=No source file named '${name}'. |
| noFunctionWithSpecifiedName=No function named '${name}'. |
| ambiguousMatchingFilenames=Ambiguous matching file names: |
| ambiguousMatchingFunctionNames=Ambiguous matching function names: |
| functionInFile=${functionName} in ${filename} |
| expectedFile=Expected file name or file number starting with #; got ${token} |
| noSuchFileOrFunction=No file or function named '${token}'. |
| localVariable=local |
| functionArgumentVariable=argument |
| mustBeOnlyOneVariable=Expression must contain only a single variable |
| lineJunk=Junk at end of line specification |
| sourceFileNotFound=Source file not found. Use the "directory" command to specify its\n\ |
| location on this machine. Type "help directory" for important details\n\ |
| on how to specify a directory for source files that are in a package. |
| lineNumberOutOfRange=Line number ${line} out of range; file ${filename} has ${total} lines |
| noFilesFound=No files found |
| sessionInProgress=Session already in progress |
| waitingForPlayerToConnect=Waiting for Player to connect |
| waitingToConnectToPlayer=Trying to connect to Player |
| launchingWithUrl=Attempting to launch and connect to Player using URL |
| playerConnectedSessionStarting=Player connected; session starting. |
| setBreakpointsThenResume=Set breakpoints and then type 'continue' to resume the session. |
| warningNotAllCommandsSupported=WARNING: The Player that you are using does not support all fdb commands. |
| fileDoesNotExist=File not found: ${uri} |
| failedToConnect=Failed to connect; session timed out.\n\ |
| Ensure that:\n\ |
| \ \ 1. you compiled your Flash movie with debugging on, and\n\ |
| \ \ 2. you are running the Debugger version of the Flash Player. |
| manuallyLaunchPlayer=Just type 'run', and then manually launch the Player. |
| sourceCommandRequiresPath='source' command requires pathname of file to source. |
| fileNotFound=${filename}: No such file or directory. |
| argumentRequired=Argument required (fault to handle). |
| breakpointNotChanged=Breakpoint not changed. |
| badWatchpointNumber=Bad watchpoint number. |
| couldNotResolveExpression=Could not resolve expression into variable. |
| notAllBreakpointsEnabled=Not all breakpoints enabled |
| programNotBeingRun=The program is not being run. |
| commandNotValidUntilPlayerSuspended=Command not valid until Player execution suspended; try 'halt' command. |
| noHelpFileFound=No help file (fdbhelp*.txt) found. |
| invalidTargetFault=Bad target name for ActionSetTarget instruction |
| recursionLimitFault=Upper bound on recusion limit reached |
| invalidWithFault=Target of 'with' statement not an object |
| protoLimitFault=Search up prototype chain reached limit |
| invalidUrlFault=Opening a URL failed |
| exceptionFault=User exception thrown |
| stackUnderflowFault=Stack underflow occurred |
| divideByZeroFault=Divide by zero error |
| scriptTimeoutFault=ActionScript code is not progressing |
| errorWhileProcessingFile=An error occurred while processing the file (${exceptionMessage}) |
| unrecognizedAction=Unrecognized action ${action} |
| typeCommandsForBreakpoint=Type commands for when breakpoint ${breakpointNumber} is hit, one per line.\n\ |
| End with a line saying just 'end'. |
| breakpointNowUnconditional=Breakpoint ${breakpointNumber} now unconditional. |
| watchpointCouldNotBeSet=A watchpoint for '${expression}' could not be set |
| |
| changedWatchpointMode=Watchpoint ${watchpointNumber} on expression '${expression}' now ${watchpointMode} |
| # the following three strings are inserted into the above 'changedWatchpointMode' string at the ${watchpontMode} location |
| watchpointMode_read=read |
| watchpointMode_write=write |
| watchpointMode_readWrite=read-write |
| |
| createdWatchpoint=Watchpoint ${watchpointNumber} set on expression '${expression}' |
| couldNotFindWatchpoint=The watch for '${variable}' could not be found or removed. |
| noDisplayNumber=No display number ${displayNumber} |
| badDisplayNumber=warning bad display number at or near '${token}' |
| breakpointLocationNoLongerExists=Source file and line number no longer exist for breakpoint ${breakpointNumber} |
| unknownCommand=Unknown command '${command}', ignoring it |
| unknownSubcommand=Unknown ${commandCategory} command '${command}', ignoring it |
| unknownEvent=Received unknown event of type '${type}', info = ${info} |
| problemWithConnection=Problem with session connection, '${socketErrorMessage}', probably best to 'kill' it. |
| unexpectedErrorWithStackTrace=Unexpected error while processing command.\n\ |
| For diagnostic purposes stack trace follows: |
| ambiguousCommand=Ambiguous command '${input}': |
| faultHasNoTableEntry=Fault ${faultName} has no table entry |
| swfInfo=${swfName} - ${size} bytes after decompression, ${scriptCount} scripts [#${min} - #${max}]${plus} ${moreInfo}, url is ${url} |
| remainingSourceBeingLoaded=remaining source is still being loaded |
| |
| # the following string is appended to the end of any question; tells the user what to type |
| yesOrNoAppendedToAllQuestions=\ (y or n)\ |
| # the following string is what character the user should to answer "yes" to a yes/no question |
| singleCharacterUserTypesForYes=y |
| # a bunch of questions: |
| askDeleteAllBreakpoints=Delete all breakpoints? |
| askDeleteAllAutoDisplay=Delete all auto-display expressions? |
| askKillProgram=Kill the program being debugged? |
| askProgramIsRunningExitAnyway=The program is running. Exit anyway? |
| askReinitSourcePath=Reinitialize source path to empty? |
| askExpressionContainsAssignment=Your expression contains assignment! Continue? |
| # the following string is output if someone answers "no" to any of the above questions |
| yesNoQueryNotConfirmed=Not confirmed. |
| stopOnlyIfConditionMet=stop only if ${breakpointCondition} |
| breakpointAlreadyHit=breakpoint already hit ${count} time(s) |
| silentBreakpoint=silent |
| getterFunction=Getter |
| setterFunction=Setter |
| function=Function |
| unknownVariableType=<unknown> |
| variableAttribute_dontEnumerate=don't enumerate |
| variableAttribute_readOnly=read-only |
| variableAttribute_localVariable=local |
| variableAttribute_functionArgument=argument |
| variableAttribute_getterFunction=getter |
| variableAttribute_setterFunction=setter |
| variableAttribute_hasNamespace=has namespace |
| key16=Messages received: |
| key17=Messages sent: |
| key18=No source files found |
| key19=No functions found |
| key20=Function list being prepared in background; Try again later. |
| key21=--- SessionManager properties |
| key22=--- Session properties |
| stopped=Stopped |
| key24=Player running. |
| key25=No break information found |
| key26=Variable unknown |
| key27=Source information unknown, disassembled current location |
| key28=Junk at end of line specification |
| key29=No swf found for file ${arg3} |
| key30=No function found |
| key31=---- Displaying unmapped instructions at 0x${arg4} that were skipped ---- |
| key32=Line number ${arg5} out of range; file ${arg6} has ${arg7} lines |
| key33=No files found |
| key34=Player is not currently suspended on any actions. |
| key35=in '${swfName}' |
| atAddress=at ${address} |
| haltedDueToFault=due to ${fault} |
| noWorkersRunning=There are no workers running. |
