Cleanup and final touches
diff --git a/docs/Makefile b/docs/Makefile
index c60be01..27d2ee5 100644
--- a/docs/Makefile
+++ b/docs/Makefile
@@ -1,259 +1,3 @@
-# # Licensed to the Apache Software Foundation (ASF) under one or more
-# # contributor license agreements. See the NOTICE file distributed with
-# # this work for additional information regarding copyright ownership.
-# # The ASF licenses this file to You under the Apache License, Version 2.0
-# # (the "License"); you may not use this file except in compliance with
-# # the License. You may obtain a copy of the License at
-# #
-# # http://www.apache.org/licenses/LICENSE-2.0
-# #
-# # Unless required by applicable law or agreed to in writing, software
-# # distributed under the License is distributed on an "AS IS" BASIS,
-# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# # See the License for the specific language governing permissions and
-# # limitations under the License.
-
-# # Makefile for Sphinx documentation
-# #
-
-# # You can set these variables from the command line.
-
-# SPHINXOPTS =
-# SPHINXBUILD = sphinx-build
-# PAPER =
-# BUILDDIR = ../../distill-docs
-# PDFBUILDER = /tmp
-# PDF = ../manual.pdf
-
-# # User-friendly check for sphinx-build
-# ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-# $(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don\'t have Sphinx installed, grab it from http://sphinx-doc.org/)
-# endif
-
-# # Internal variables.
-# PAPEROPT_a4 = -D latex_paper_size=a4
-# PAPEROPT_letter = -D latex_paper_size=letter
-# ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-# # the i18n builder cannot share the environment and doctrees with the others
-# I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-
-# .PHONY: help
-# help:
-# @echo "Please use \`make <target>' where <target> is one of"
-# @echo " html to make standalone HTML files"
-# @echo " dirhtml to make HTML files named index.html in directories"
-# @echo " singlehtml to make a single large HTML file"
-# @echo " pickle to make pickle files"
-# @echo " json to make JSON files"
-# @echo " htmlhelp to make HTML files and a HTML help project"
-# @echo " qthelp to make HTML files and a qthelp project"
-# @echo " applehelp to make an Apple Help Book"
-# @echo " devhelp to make HTML files and a Devhelp project"
-# @echo " epub to make an epub"
-# @echo " epub3 to make an epub3"
-# @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-# @echo " latexpdf to make LaTeX files and run them through pdflatex"
-# @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-# @echo " text to make text files"
-# @echo " man to make manual pages"
-# @echo " texinfo to make Texinfo files"
-# @echo " info to make Texinfo files and run them through makeinfo"
-# @echo " gettext to make PO message catalogs"
-# @echo " changes to make an overview of all changed/added/deprecated items"
-# @echo " xml to make Docutils-native XML files"
-# @echo " pseudoxml to make pseudoxml-XML files for display purposes"
-# @echo " linkcheck to check all external links for integrity"
-# @echo " doctest to run all doctests embedded in the documentation (if enabled)"
-# @echo " coverage to run coverage check of the documentation (if enabled)"
-# @echo " dummy to check syntax errors of document sources"
-
-# .PHONY: clean
-# clean:
-# rm -rf $(BUILDDIR)/doctrees
-# rm -rf $(BUILDDIR)/html/*.html
-# rm -rf $(BUILDDIR)/html/*.js
-# rm -rf $(BUILDDIR)/html/*.html
-# rm -rf $(BUILDDIR)/html/_sources
-# rm -rf $(BUILDDIR)/html/_static
-
-# .PHONY: html
-# html:
-# $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-# @echo
-# @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-# .PHONY: dirhtml
-# dirhtml:
-# $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-# @echo
-# @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-# .PHONY: singlehtml
-# singlehtml:
-# $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-# @echo
-# @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-# .PHONY: pickle
-# pickle:
-# $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-# @echo
-# @echo "Build finished; now you can process the pickle files."
-
-# .PHONY: json
-# json:
-# $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-# @echo
-# @echo "Build finished; now you can process the JSON files."
-
-# .PHONY: htmlhelp
-# htmlhelp:
-# $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-# @echo
-# @echo "Build finished; now you can run HTML Help Workshop with the" \
-# ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-# .PHONY: qthelp
-# qthelp:
-# $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-# @echo
-# @echo "Build finished; now you can run "qcollectiongenerator" with the" \
-# ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-# @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Distill.qhcp"
-# @echo "To view the help file:"
-# @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Distill.qhc"
-
-# .PHONY: applehelp
-# applehelp:
-# $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
-# @echo
-# @echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
-# @echo "N.B. You won't be able to view it unless you put it in" \
-# "~/Library/Documentation/Help or install it in your application" \
-# "bundle."
-
-# .PHONY: devhelp
-# devhelp:
-# $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-# @echo
-# @echo "Build finished."
-# @echo "To view the help file:"
-# @echo "# mkdir -p $$HOME/.local/share/devhelp/Distill"
-# @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Distill"
-# @echo "# devhelp"
-
-# .PHONY: epub
-# epub:
-# $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-# @echo
-# @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-# .PHONY: epub3
-# epub3:
-# $(SPHINXBUILD) -b epub3 $(ALLSPHINXOPTS) $(BUILDDIR)/epub3
-# @echo
-# @echo "Build finished. The epub3 file is in $(BUILDDIR)/epub3."
-
-# .PHONY: latex
-# latex:
-# $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-# @echo
-# @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-# @echo "Run \`make' in that directory to run these through (pdf)latex" \
-# "(use \`make latexpdf' here to do that automatically)."
-
-# .PHONY: latexpdf
-# latexpdf:
-# $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(PDFBUILDER)/latex
-# @echo "Running LaTeX files through pdflatex..."
-# $(MAKE) -C $(PDFBUILDER)/latex all-pdf
-# cp $(PDFBUILDER)/latex/*.pdf $(PDF)
-# @echo "pdflatex finished; see $(PDF)"
-
-# .PHONY: latexpdfja
-# latexpdfja:
-# $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-# @echo "Running LaTeX files through platex and dvipdfmx..."
-# $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-# @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-# .PHONY: text
-# text:
-# $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-# @echo
-# @echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-# .PHONY: man
-# man:
-# $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-# @echo
-# @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-# .PHONY: texinfo
-# texinfo:
-# $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-# @echo
-# @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-# @echo "Run \`make' in that directory to run these through makeinfo" \
-# "(use \`make info' here to do that automatically)."
-
-# .PHONY: info
-# info:
-# $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-# @echo "Running Texinfo files through makeinfo..."
-# make -C $(BUILDDIR)/texinfo info
-# @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-# .PHONY: gettext
-# gettext:
-# $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-# @echo
-# @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-# .PHONY: changes
-# changes:
-# $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-# @echo
-# @echo "The overview file is in $(BUILDDIR)/changes."
-
-# .PHONY: linkcheck
-# linkcheck:
-# $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-# @echo
-# @echo "Link check complete; look for any errors in the above output " \
-# "or in $(BUILDDIR)/linkcheck/output.txt."
-
-# .PHONY: doctest
-# doctest:
-# $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-# @echo "Testing of doctests in the sources finished, look at the " \
-# "results in $(BUILDDIR)/doctest/output.txt."
-
-# .PHONY: coverage
-# coverage:
-# $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
-# @echo "Testing of coverage in the sources finished, look at the " \
-# "results in $(BUILDDIR)/coverage/python.txt."
-
-# .PHONY: xml
-# xml:
-# $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-# @echo
-# @echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-# .PHONY: pseudoxml
-# pseudoxml:
-# $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-# @echo
-# @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
-
-# .PHONY: dummy
-# dummy:
-# $(SPHINXBUILD) -b dummy $(ALLSPHINXOPTS) $(BUILDDIR)/dummy
-# @echo
-# @echo "Build finished. Dummy builder generates no files."
-
-
# ==================================================
# Minimal makefile for Sphinx documentation
#
diff --git a/docs/conf.py b/docs/conf.py
index caa54f0..a8561df 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -1,7 +1,7 @@
# -- Project information -----------------------------------------------------
project = 'Apache Flagon Distill'
copyright = '2022, UMD ARLIS'
-author = 'NAMES TO BE ADDED' #add names here
+author = 'Joshua Poore, Amir Ghaemi, Alex Veerasammy, Grant Tamrakar' #add names here
# -- General configuration ---------------------------------------------------
diff --git a/docs/requirements.txt b/docs/requirements.txt
index 8910cc5..8fece18 100644
--- a/docs/requirements.txt
+++ b/docs/requirements.txt
@@ -1,4 +1,3 @@
-
Sphinx==1.6.3
sphinx-rtd-theme==0.2.4
sphinxcontrib-websupport==1.0.1
