build.properties - directory-fortress-core - Git at Google

 #
 # Copyright (c) 2009-2013. JoshuaTree. All Rights Reserved.
 #

 ########################################################################
 # 0. About the fortress build.properties file
 ########################################################################

 # Use this property file to specify environment settings specific to your environment and fortress runtime components.
 # These parameters will be loaded into the following locations by the Fortress during the init targets within the build.xml ant management utility:
 # a. fortress.properties - Fortress' configuration file tells fortress runtime how to connect to remote resources
 # b. refreshLDAPData.xml - Used by fortress to initialize and base load the LDAP DIT data structures.  Fortress also stores runtime params inside 'ou=Config' container on remote server.
 # c. slapd.conf - This will be used to configure the runtime OpenLDAP server (slapd) if applicable.

 ########################################################################
 # 1. BEGIN BASIC CONFIGURATION SECTION
 ########################################################################

 # Use this Fortress Core version:
 version=1.0-RC32

 # Enable local.mode property if your machine does not have connection to Internet and runtime dependencies have already downloaded to FORTRESS_HOME/lib folder on this machine:
 #local.mode=true

 # Set sudo.pw if running 'init-slapd' on Linux machine and sudo access required, otherwise leave this value blank
 # The sudo.pw variable must be uncommented and left empty iff installing Symas-OpenLDAP package onto Redhat Linux platform:
 sudo.pw=

 # If encryption of LDAP &/or HTTP service account passwords (e.g. cfg.root.pw, cfg.log.root.pw and http.pw params) is required, this field must be set.
 # If encryption of service accounts not needed, leave this value blank, and set the password values for cfg.root.pw, cfg.log.root.pw and http.pw to be their clear text value.
 # Use any arbitrary value here but whatever used must also be key used to encrypt.
 crypto.prop=abcd12345

 ########################################################################
 # 2. BEGIN HTTP CONFIGURATION SECTION (Ignore if using LDAPv3):
 ########################################################################

 # The following optional HTTP parameters are needed when Fortress client communicates though EnMasse HTTP proxy (rather than LDAP) server:
 # Setting the enable.mgr.impl.rest to 'true' sets Fortress instance to use HTTP services rather than LDAPv3 protocol. Default value is 'false':
 # Using REST/HTTP allows Fortress communications to pass through firewalls and other non-LDAP network intermediaries.
 enable.mgr.impl.rest=false
 #enable.mgr.impl.rest=true

 # This user account is added automatically during init-slapd or init-apacheds target via 'FortressDemoUsers.xml' policy file:
 http.user=demouser4
 http.pw=gX9JbCTxJW5RiH+otQEX0Ja0RIAoPBQf
 http.host=localhost
 http.port=80

 ########################################################################
 # 3. BEGIN MULTITNENACY SECTION (Set tenant=HOME if not multitenant):
 ########################################################################
 # The tenant property is used by Ant targets 'admin', 'cli', 'console', 'test-full', and 'test-samples':
 tenant=HOME
 #tenant=Client123
 #tenant=Client456
 #tenant=Client789

 ########################################################################
 # 4. BEGIN LDAP SERVER CONFIGURATION SECTION: (Ignore if using HTTP):
 ########################################################################

 # This param tells fortress what type of ldap server in use:
 ldap.server.type=openldap
 #ldap.server.type=apacheds
 # This is the default:
 #ldap.client.type=unboundid
 # To override and use apache ldap API uncomment this:
 #ldap.client.type=apache

 # These parameters point fortress to LDAP host:
 ldap.host=localhost
 ldap.port=389
 #ldap.host=192.168.1.102
 #ldap.port=10389

 # These are used to construct suffix for DIT, i.e. dc=example,dc=com.
 suffix.name=jts
 suffix.dc=us
 #suffix.name=example
 #suffix.dc=com
 # Do not change suffix param unless you know what you are doing:
 suffix=dc=${suffix.name},dc=${suffix.dc}

 # These are the connection parameters used for LDAP service account:
 root.dn=cn=Manager,${suffix}
 #root.dn=uid=admin,ou=system
 # Used to load OpenLDAP admin root password in slapd.conf and was encrypted using 'slappasswd' command:
 root.pw={SSHA}pSOV2TpCxj2NMACijkcMko4fGrFopctU
 # This OpenLDAP admin root pass is bound for fortress.properties and was encrypted using 'encrypt' target in build.xml:
 cfg.root.pw=W7T0G9hylKZQ4K+DF8gfgA==

 # This specifies the number of default LDAP connections to maintain in the pool:
 admin.min.conn=1
 admin.max.conn=10
 # This speicifes the number of user LDAP connections (used for user authentication operations only) to maintain in the pool:
 # User Pool:
 user.min.conn=1
 user.max.conn=10

 ####################################################################################
 # 5. BEGIN OPENLDAP SERVER CONFIGURATION SECTION: (Ignore if using HTTP or ApacheDS):
 ####################################################################################

 # This speicifes the number of audit logging LDAP connections (used for audit logging operations only) to maintain in the pool:
 # Audit Pool:
 log.min.conn=1
 log.max.conn=3

 #These are passwords used for LDAP audit log service accounts:
 # Audit Pool:
 log.root.dn=cn=Manager,${log.suffix}
 # This OpenLDAP slapd logger password is bound for slapd.conf and was encrypted using 'slappasswd' command:
 log.root.pw={SSHA}pSOV2TpCxj2NMACijkcMko4fGrFopctU
 # This OpenLDAP slapd logger password will be stored using fortress' remote configuration utility and was encrypted using 'encrypt' target in build.xml:
 cfg.log.root.pw=W7T0G9hylKZQ4K+DF8gfgA==
 # More Audit Config:
 log.suffix=cn=log
 log.ops=logops bind writes compare
 #log.ops=###AuditDisabled

 # OpenLDAP MDB Backend config is default setting for Fortress::
 db.type=mdb
 dflt.rdrs=maxreaders 64
 dflt.size=maxsize 1000000000
 log.rdrs=maxreaders 64
 log.size=maxsize 1000000000
 dflt.bdb.cache.size=
 dflt.bdb.cache.idle.size=
 log.bdb.cache.size=

 #base.load.script=FortressDemoUsers.xml

 # Do not change any params below this line unless you know what you are doing:

 ## If using Symas OpenLDAP on NIX, uncomment this section:
 db.root=/var/openldap
 openldap.root=/opt/symas
 slapd.dir=${openldap.root}/etc/openldap
 # to start debug mode:
 #slapd.start=${openldap.root}/lib/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap -d -1
 pid.dir=/var/symas

 db.dir=${db.root}/dflt
 db.hist.dir=${db.root}/hist
 db.bak.dir=${db.root}/backup/dflt
 db.bak.hist.dir=${db.root}/backup/hist

 # unless you know what you're doing, take the default:
 log.dbnosynch=dbnosync
 #log.dbnosynch=
 dflt.dbnosynch=dbnosync
 #dflt.dbnosynch=
 log.checkpoint=checkpoint   64 5
 dflt.checkpoint=checkpoint	64 5

 ## If using Debian/Ubuntu OpenLDAP, uncomment this section:
 #unless you know what you're doing, take the default:
 #db.dir=/var/lib/ldap
 #db.hist.dir=${db.dir}/hist
 #db.bak.dir=/var/lib/ldap-backup/db
 #db.bak.hist.dir=/var/lib/ldap-backup/hist
 #slapd.dir=/etc/ldap
 #pid.dir=/var/run/slapd
 #slapd.module.dir=/usr/lib/ldap
 #slapd.start=slapd -h ldap://${ldap.host}:${ldap.port} -f /etc/ldap/slapd.conf


 ###########################################################################################
 # 6. BEGIN SYMAS-OPENLDAP INSTALL CONFIGURATION SECTION (Ignore if using ApacheDS or HTTP):
 ###########################################################################################

 ## If using Symas OpenLDAP, uncomment single option from #1 - 8 below:
 # Each of the options are used for a particular Symas-OpenLDAP platform.

 # Option 1 - Debian i386 Silver:
 #platform=Debian-Silver-i386
 #slapd.install=dpkg -i symas-openldap-silver.32_2.4.35-1_i386.deb
 #slapd.uninstall=dpkg -r symas-openldap-silver
 #install.image.dir=/home/smckinn/archives/debian32
 #slapd.module.dir=${openldap.root}/lib/openldap
 #slapd.start=${openldap.root}/lib/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap

 # Option 2 - Debian 64-bit Silver:
 platform=Debian-Silver-x86-64
 #slapd.install=dpkg -i symas-openldap-silver.64_2.4.35-1_amd64.deb
 #slapd.uninstall=dpkg -r symas-openldap-silver
 install.image.dir=/home/smckinn/archives/debian64
 slapd.module.dir=${openldap.root}/lib64/openldap
 slapd.start=${openldap.root}/lib64/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap

 # Option 3 - Debian i386 Gold:
 #platform=Debian-Gold-i386
 #slapd.install=dpkg -i symas-openldap-gold.32_2.4.29-1_i386.deb
 #slapd.uninstall=dpkg -r symas-openldap-gold.32

 # Option 4 - Redhat i386 Silver:
 #platform=Redhat-Silver-i386
 #slapd.install=rpm -Uvv symas-openldap-silver.i386-2.4.35-1.rpm
 #slapd.uninstall=rpm -e symas-openldap-silver
 #install.image.dir=/home/smckinn/archives/redhat32
 #slapd.module.dir=${openldap.root}/lib/openldap
 #slapd.start=${openldap.root}/lib/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap

 # Option 5 - Redhat i386 Gold:
 #platform=Redhat-Gold-i386
 #slapd.install=rpm -Uvv symas-openldap-gold.i386-2.4.28-1.rpm
 #slapd.uninstall=rpm -e symas-openldap-gold

 # Option 6 - Redhat 64-bit Silver:
 #platform=Redhat-Silver-x86-64
 #slapd.install=rpm -Uvv symas-openldap-silver.x86_64-2.4.35-1.rpm
 #slapd.uninstall=rpm -e symas-openldap-silver
 #install.image.dir=/home/smckinn/archives/redhat64
 #slapd.module.dir=${openldap.root}/lib64/openldap
 #slapd.start=${openldap.root}/lib64/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap

 # Option 7 - Windows 32-bit Silver:
 #platform=Windows-Silver-i686
 #slapd.exe.drive=C
 #slapd.exe.dir=OpenLDAP
 #fortress.home.drive=C
 #windows=true
 #install.image.dir=/home/smckinn/archives/win32
 #install.image.loc=symas-openldap
 #install.image.exe=symas-openldap-silver-win.NT_i686-2.4.32.2
 #uninstall.image.exe=uninstall-symas-openldap-silver-win
 #pid.dir=.
 #slapd.exe.location=${slapd.exe.drive}:\\${slapd.exe.dir}
 #slapd.exe.location2=${slapd.exe.drive}:/${slapd.exe.dir}
 #db.root=${slapd.exe.location2}/db
 #slapd.dir=${slapd.exe.location2}/etc/openldap
 #slapd.module.dir=${slapd.exe.location2}/openldap
 #dflt.size=maxsize 100000000
 #log.size=maxsize 100000000

 # Option 8 - Windows 32-bit Gold
 #platform=Windows-Gold-i686
 #windows=true
 #slapd.exe.dir=/JavaTools/symas-openldap-gold-win
 #db.dir=/JavaTools/symas-openldap-gold-win/ldap
 #db.hist.dir=${db.dir}/hist
 #db.bak.dir=/JavaTools/symas-openldap-gold-win/ldap-backup/db
 #db.bak.hist.dir=/JavaTools/symas-openldap-gold-win/ldap-backup/hist
 #slapd.dir=/JavaTools/symas-openldap-gold-win/etc/ldap
 #pid.dir=.
 #slapd.module.dir=/JavaTools/symas-openldap-gold-win/openldap
 #slapd.start=slapd.exe -f \JavaTools\symas-openldap-gold-win\etc\openldap\slapd.conf

 ## If Fortress Builder used to install OpenLDAP, uncomment and set value to point for Fortress Builder home folder:
 #builder.home=/home/smckinn/tmp/fortress/8/fortressBuilder-Debian-Silver-i386-1.0.0-rc6

 ########################################################################################
 # 7. BEGIN BUILDER INSTALL CONFIGURATION SECTION (Do not modify):
 ########################################################################################

 # Only needed for EnMasse setup:
 M2_HOME=./apache-maven
 #M2_HOME=/usr/share/maven2

 tomcat-realm.conf=<Realm className="us.jts.sentry.tomcat.Tc7AccessMgrProxy" debug="0" resourceName="UserDatabase" containerType="Tomcat7" realmClasspath="${user.dir}${file.separator}conf${path.separator}${user.dir}${file.separator}dist${file.separator}fortressSentry-${version}.jar"/>
 tomcat.dir=../apache-tomcat

 #These props are for 'Builder' target and have been moved here: "${user.home}/build.properties"
 openldap.install.artifact.dir=${basedir}
 #openldap.install.artifact.dir=${basedir}/symas-openldap
 #tomcat.image.dir=/home/smckinn/archives/tomcat/apache-tomcat-7.0.27
 #maven.image.dir=/home/smckinn/archives/java/apache-maven-3.0.4
	#
	# Copyright (c) 2009-2013. JoshuaTree. All Rights Reserved.
	#

	########################################################################
	# 0. About the fortress build.properties file
	########################################################################

	# Use this property file to specify environment settings specific to your environment and fortress runtime components.
	# These parameters will be loaded into the following locations by the Fortress during the init targets within the build.xml ant management utility:
	# a. fortress.properties - Fortress' configuration file tells fortress runtime how to connect to remote resources
	# b. refreshLDAPData.xml - Used by fortress to initialize and base load the LDAP DIT data structures. Fortress also stores runtime params inside 'ou=Config' container on remote server.
	# c. slapd.conf - This will be used to configure the runtime OpenLDAP server (slapd) if applicable.

	########################################################################
	# 1. BEGIN BASIC CONFIGURATION SECTION
	########################################################################

	# Use this Fortress Core version:
	version=1.0-RC32

	# Enable local.mode property if your machine does not have connection to Internet and runtime dependencies have already downloaded to FORTRESS_HOME/lib folder on this machine:
	#local.mode=true

	# Set sudo.pw if running 'init-slapd' on Linux machine and sudo access required, otherwise leave this value blank
	# The sudo.pw variable must be uncommented and left empty iff installing Symas-OpenLDAP package onto Redhat Linux platform:
	sudo.pw=

	# If encryption of LDAP &/or HTTP service account passwords (e.g. cfg.root.pw, cfg.log.root.pw and http.pw params) is required, this field must be set.
	# If encryption of service accounts not needed, leave this value blank, and set the password values for cfg.root.pw, cfg.log.root.pw and http.pw to be their clear text value.
	# Use any arbitrary value here but whatever used must also be key used to encrypt.
	crypto.prop=abcd12345

	########################################################################
	# 2. BEGIN HTTP CONFIGURATION SECTION (Ignore if using LDAPv3):
	########################################################################

	# The following optional HTTP parameters are needed when Fortress client communicates though EnMasse HTTP proxy (rather than LDAP) server:
	# Setting the enable.mgr.impl.rest to 'true' sets Fortress instance to use HTTP services rather than LDAPv3 protocol. Default value is 'false':
	# Using REST/HTTP allows Fortress communications to pass through firewalls and other non-LDAP network intermediaries.
	enable.mgr.impl.rest=false
	#enable.mgr.impl.rest=true

	# This user account is added automatically during init-slapd or init-apacheds target via 'FortressDemoUsers.xml' policy file:
	http.user=demouser4
	http.pw=gX9JbCTxJW5RiH+otQEX0Ja0RIAoPBQf
	http.host=localhost
	http.port=80

	########################################################################
	# 3. BEGIN MULTITNENACY SECTION (Set tenant=HOME if not multitenant):
	########################################################################
	# The tenant property is used by Ant targets 'admin', 'cli', 'console', 'test-full', and 'test-samples':
	tenant=HOME
	#tenant=Client123
	#tenant=Client456
	#tenant=Client789

	########################################################################
	# 4. BEGIN LDAP SERVER CONFIGURATION SECTION: (Ignore if using HTTP):
	########################################################################

	# This param tells fortress what type of ldap server in use:
	ldap.server.type=openldap
	#ldap.server.type=apacheds
	# This is the default:
	#ldap.client.type=unboundid
	# To override and use apache ldap API uncomment this:
	#ldap.client.type=apache

	# These parameters point fortress to LDAP host:
	ldap.host=localhost
	ldap.port=389
	#ldap.host=192.168.1.102
	#ldap.port=10389

	# These are used to construct suffix for DIT, i.e. dc=example,dc=com.
	suffix.name=jts
	suffix.dc=us
	#suffix.name=example
	#suffix.dc=com
	# Do not change suffix param unless you know what you are doing:
	suffix=dc=${suffix.name},dc=${suffix.dc}

	# These are the connection parameters used for LDAP service account:
	root.dn=cn=Manager,${suffix}
	#root.dn=uid=admin,ou=system
	# Used to load OpenLDAP admin root password in slapd.conf and was encrypted using 'slappasswd' command:
	root.pw={SSHA}pSOV2TpCxj2NMACijkcMko4fGrFopctU
	# This OpenLDAP admin root pass is bound for fortress.properties and was encrypted using 'encrypt' target in build.xml:
	cfg.root.pw=W7T0G9hylKZQ4K+DF8gfgA==

	# This specifies the number of default LDAP connections to maintain in the pool:
	admin.min.conn=1
	admin.max.conn=10
	# This speicifes the number of user LDAP connections (used for user authentication operations only) to maintain in the pool:
	# User Pool:
	user.min.conn=1
	user.max.conn=10

	####################################################################################
	# 5. BEGIN OPENLDAP SERVER CONFIGURATION SECTION: (Ignore if using HTTP or ApacheDS):
	####################################################################################

	# This speicifes the number of audit logging LDAP connections (used for audit logging operations only) to maintain in the pool:
	# Audit Pool:
	log.min.conn=1
	log.max.conn=3

	#These are passwords used for LDAP audit log service accounts:
	# Audit Pool:
	log.root.dn=cn=Manager,${log.suffix}
	# This OpenLDAP slapd logger password is bound for slapd.conf and was encrypted using 'slappasswd' command:
	log.root.pw={SSHA}pSOV2TpCxj2NMACijkcMko4fGrFopctU
	# This OpenLDAP slapd logger password will be stored using fortress' remote configuration utility and was encrypted using 'encrypt' target in build.xml:
	cfg.log.root.pw=W7T0G9hylKZQ4K+DF8gfgA==
	# More Audit Config:
	log.suffix=cn=log
	log.ops=logops bind writes compare
	#log.ops=###AuditDisabled

	# OpenLDAP MDB Backend config is default setting for Fortress::
	db.type=mdb
	dflt.rdrs=maxreaders 64
	dflt.size=maxsize 1000000000
	log.rdrs=maxreaders 64
	log.size=maxsize 1000000000
	dflt.bdb.cache.size=
	dflt.bdb.cache.idle.size=
	log.bdb.cache.size=

	#base.load.script=FortressDemoUsers.xml

	# Do not change any params below this line unless you know what you are doing:

	## If using Symas OpenLDAP on NIX, uncomment this section:
	db.root=/var/openldap
	openldap.root=/opt/symas
	slapd.dir=${openldap.root}/etc/openldap
	# to start debug mode:
	#slapd.start=${openldap.root}/lib/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap -d -1
	pid.dir=/var/symas

	db.dir=${db.root}/dflt
	db.hist.dir=${db.root}/hist
	db.bak.dir=${db.root}/backup/dflt
	db.bak.hist.dir=${db.root}/backup/hist

	# unless you know what you're doing, take the default:
	log.dbnosynch=dbnosync
	#log.dbnosynch=
	dflt.dbnosynch=dbnosync
	#dflt.dbnosynch=
	log.checkpoint=checkpoint 64 5
	dflt.checkpoint=checkpoint 64 5

	## If using Debian/Ubuntu OpenLDAP, uncomment this section:
	#unless you know what you're doing, take the default:
	#db.dir=/var/lib/ldap
	#db.hist.dir=${db.dir}/hist
	#db.bak.dir=/var/lib/ldap-backup/db
	#db.bak.hist.dir=/var/lib/ldap-backup/hist
	#slapd.dir=/etc/ldap
	#pid.dir=/var/run/slapd
	#slapd.module.dir=/usr/lib/ldap
	#slapd.start=slapd -h ldap://${ldap.host}:${ldap.port} -f /etc/ldap/slapd.conf


	###########################################################################################
	# 6. BEGIN SYMAS-OPENLDAP INSTALL CONFIGURATION SECTION (Ignore if using ApacheDS or HTTP):
	###########################################################################################

	## If using Symas OpenLDAP, uncomment single option from #1 - 8 below:
	# Each of the options are used for a particular Symas-OpenLDAP platform.

	# Option 1 - Debian i386 Silver:
	#platform=Debian-Silver-i386
	#slapd.install=dpkg -i symas-openldap-silver.32_2.4.35-1_i386.deb
	#slapd.uninstall=dpkg -r symas-openldap-silver
	#install.image.dir=/home/smckinn/archives/debian32
	#slapd.module.dir=${openldap.root}/lib/openldap
	#slapd.start=${openldap.root}/lib/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap

	# Option 2 - Debian 64-bit Silver:
	platform=Debian-Silver-x86-64
	#slapd.install=dpkg -i symas-openldap-silver.64_2.4.35-1_amd64.deb
	#slapd.uninstall=dpkg -r symas-openldap-silver
	install.image.dir=/home/smckinn/archives/debian64
	slapd.module.dir=${openldap.root}/lib64/openldap
	slapd.start=${openldap.root}/lib64/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap

	# Option 3 - Debian i386 Gold:
	#platform=Debian-Gold-i386
	#slapd.install=dpkg -i symas-openldap-gold.32_2.4.29-1_i386.deb
	#slapd.uninstall=dpkg -r symas-openldap-gold.32

	# Option 4 - Redhat i386 Silver:
	#platform=Redhat-Silver-i386
	#slapd.install=rpm -Uvv symas-openldap-silver.i386-2.4.35-1.rpm
	#slapd.uninstall=rpm -e symas-openldap-silver
	#install.image.dir=/home/smckinn/archives/redhat32
	#slapd.module.dir=${openldap.root}/lib/openldap
	#slapd.start=${openldap.root}/lib/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap

	# Option 5 - Redhat i386 Gold:
	#platform=Redhat-Gold-i386
	#slapd.install=rpm -Uvv symas-openldap-gold.i386-2.4.28-1.rpm
	#slapd.uninstall=rpm -e symas-openldap-gold

	# Option 6 - Redhat 64-bit Silver:
	#platform=Redhat-Silver-x86-64
	#slapd.install=rpm -Uvv symas-openldap-silver.x86_64-2.4.35-1.rpm
	#slapd.uninstall=rpm -e symas-openldap-silver
	#install.image.dir=/home/smckinn/archives/redhat64
	#slapd.module.dir=${openldap.root}/lib64/openldap
	#slapd.start=${openldap.root}/lib64/slapd -h ldap://${ldap.host}:${ldap.port} -f ${openldap.root}/etc/openldap/slapd.conf -F ${openldap.root}/etc/openldap

	# Option 7 - Windows 32-bit Silver:
	#platform=Windows-Silver-i686
	#slapd.exe.drive=C
	#slapd.exe.dir=OpenLDAP
	#fortress.home.drive=C
	#windows=true
	#install.image.dir=/home/smckinn/archives/win32
	#install.image.loc=symas-openldap
	#install.image.exe=symas-openldap-silver-win.NT_i686-2.4.32.2
	#uninstall.image.exe=uninstall-symas-openldap-silver-win
	#pid.dir=.
	#slapd.exe.location=${slapd.exe.drive}:\\${slapd.exe.dir}
	#slapd.exe.location2=${slapd.exe.drive}:/${slapd.exe.dir}
	#db.root=${slapd.exe.location2}/db
	#slapd.dir=${slapd.exe.location2}/etc/openldap
	#slapd.module.dir=${slapd.exe.location2}/openldap
	#dflt.size=maxsize 100000000
	#log.size=maxsize 100000000

	# Option 8 - Windows 32-bit Gold
	#platform=Windows-Gold-i686
	#windows=true
	#slapd.exe.dir=/JavaTools/symas-openldap-gold-win
	#db.dir=/JavaTools/symas-openldap-gold-win/ldap
	#db.hist.dir=${db.dir}/hist
	#db.bak.dir=/JavaTools/symas-openldap-gold-win/ldap-backup/db
	#db.bak.hist.dir=/JavaTools/symas-openldap-gold-win/ldap-backup/hist
	#slapd.dir=/JavaTools/symas-openldap-gold-win/etc/ldap
	#pid.dir=.
	#slapd.module.dir=/JavaTools/symas-openldap-gold-win/openldap
	#slapd.start=slapd.exe -f \JavaTools\symas-openldap-gold-win\etc\openldap\slapd.conf

	## If Fortress Builder used to install OpenLDAP, uncomment and set value to point for Fortress Builder home folder:
	#builder.home=/home/smckinn/tmp/fortress/8/fortressBuilder-Debian-Silver-i386-1.0.0-rc6

	########################################################################################
	# 7. BEGIN BUILDER INSTALL CONFIGURATION SECTION (Do not modify):
	########################################################################################

	# Only needed for EnMasse setup:
	M2_HOME=./apache-maven
	#M2_HOME=/usr/share/maven2

	tomcat-realm.conf=<Realm className="us.jts.sentry.tomcat.Tc7AccessMgrProxy" debug="0" resourceName="UserDatabase" containerType="Tomcat7" realmClasspath="${user.dir}${file.separator}conf${path.separator}${user.dir}${file.separator}dist${file.separator}fortressSentry-${version}.jar"/>
	tomcat.dir=../apache-tomcat

	#These props are for 'Builder' target and have been moved here: "${user.home}/build.properties"
	openldap.install.artifact.dir=${basedir}
	#openldap.install.artifact.dir=${basedir}/symas-openldap
	#tomcat.image.dir=/home/smckinn/archives/tomcat/apache-tomcat-7.0.27
	#maven.image.dir=/home/smckinn/archives/java/apache-maven-3.0.4