docs: remove outdated translations (#71)
diff --git a/doc/de/README.md b/doc/de/README.md
deleted file mode 100644
index c8c8fca..0000000
--- a/doc/de/README.md
+++ /dev/null
@@ -1,163 +0,0 @@
-<!---
-# license: Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
--->
-
-# cordova-plugin-device-motion
-
-[![Build Status](https://travis-ci.org/apache/cordova-plugin-device-motion.svg)](https://travis-ci.org/apache/cordova-plugin-device-motion)
-
-Dieses Plugin ermöglicht den Zugriff auf das Gerät Beschleunigungsmesser. Der Beschleunigungsmesser ist ein Bewegungssensor, der die Änderung (*Delta*) erkennt Bewegung im Verhältnis zu der aktuellen Geräte-Orientierung, in drei Dimensionen entlang der *x-*, *y-*und *Z* -Achse.
-
-Der Zugang ist über eine globale `navigator.accelerometer`-Objekt.
-
-Obwohl das Objekt mit der globalen Gültigkeitsbereich `navigator` verbunden ist, steht es nicht bis nach dem `Deviceready`-Ereignis.
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## Installation
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## Unterstützte Plattformen
-
- * Amazon Fire OS
- * Android
- * BlackBerry 10
- * Browser
- * Firefox OS
- * iOS
- * Tizen
- * Windows Phone 8
- * Windows
-
-## Methoden
-
- * navigator.accelerometer.getCurrentAcceleration
- * navigator.accelerometer.watchAcceleration
- * navigator.accelerometer.clearWatch
-
-## Objekte
-
- * Beschleunigung
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Erhalten Sie die aktuelle Beschleunigung entlang der *x-*, *y-* und *z*-Achsen.
-
-Diese Beschleunigungswerte werden an die `accelerometerSuccess`-Callback-Funktion zurückgegeben.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### Beispiel
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### Browser-Eigenheiten
-
-Werte für X, Y, Z-Bewegung sind alle zufällig generierten in Ordnung, den Beschleunigungsmesser zu simulieren.
-
-### iOS Macken
-
- * iOS erkennt nicht das Konzept die aktuelle Beschleunigung zu einem bestimmten Zeitpunkt zu bekommen.
-
- * Müssen Sie die Beschleunigung zu sehen und erfassen die Daten zu bestimmten Zeitintervallen.
-
- * So die `getCurrentAcceleration` -Funktion führt zu den letzten Wert berichtet von einer `watchAccelerometer` rufen.
-
-## navigator.accelerometer.watchAcceleration
-
-Ruft das Gerät aktuelle `Accelerometer` in regelmäßigen Abständen, die `accelerometerSuccess`-Callback-Funktion jedes Mal ausgeführt. Gibt das Intervall in Millisekunden über das `AcceleratorOptions`-Objekt-`frequency`-Parameter.
-
-Die zurückgegebenen Watch-ID verweist der Beschleunigungsmesser Uhr Intervall und kann mit `navigator.accelerometer.clearWatch` um zu stoppen, beobachten den Beschleunigungsmesser verwendet werden.
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
- * **accelerometerOptions**: Ein Objekt mit den folgenden optionalen Elementen:
- * **Zeitraum**: gewünschten Zeitraum der Aufrufe von AccelerometerSuccess mit Beschleunigungsdaten in Millisekunden. *(Anzahl)* (Default: 10000)
-
-### Beispiel
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS Macken
-
-Die API ruft die Erfolg-Callback-Funktion im Intervall angefordert, aber schränkt den Bereich der Anforderungen an das Gerät zwischen 40ms und 1000ms. Beispielsweise wenn Sie ein Intervall von 3 Sekunden, (3000ms), beantragen die API fordert Daten vom Gerät jede 1 Sekunde, aber nur den Erfolg-Rückruf führt alle 3 Sekunden.
-
-## navigator.accelerometer.clearWatch
-
-Hör auf, beobachten die `Beschleunigung` durch den `watchID`-Parameter verwiesen.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
- * **WatchID**: die ID von zurückgegeben`navigator.accelerometer.watchAcceleration`.
-
-### Beispiel
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## Beschleunigung
-
-Zu einem bestimmten Zeitpunkt im Zeit erfasste `Accelerometer`-Daten enthält. Beschleunigungswerte sind die Auswirkungen der Schwerkraft (9.81 m/s ^ 2), so dass wenn ein Gerät flach und nach oben, *X*, *y liegt*, und *Z*-Werte zurückgegeben werden, ``, `` und `9.81 sollte`.
-
-### Eigenschaften
-
- * **X**: Betrag der Beschleunigung auf der x-Achse. (in m/s ^ 2) *(Anzahl)*
- * **y**: Betrag der Beschleunigung auf der y-Achse. (in m/s ^ 2) *(Anzahl)*
- * **Z**: Betrag der Beschleunigung auf die z-Achse. (in m/s ^ 2) *(Anzahl)*
- * **Timestamp**: Zeitstempel der Erstellung in Millisekunden. *(DOMTimeStamp)*
\ No newline at end of file
diff --git a/doc/de/index.md b/doc/de/index.md
deleted file mode 100644
index 87efd73..0000000
--- a/doc/de/index.md
+++ /dev/null
@@ -1,161 +0,0 @@
-<!---
- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-# cordova-plugin-device-motion
-
-Dieses Plugin ermöglicht den Zugriff auf das Gerät Beschleunigungsmesser. Der Beschleunigungsmesser ist ein Bewegungssensor, der die Änderung (*Delta*) erkennt Bewegung im Verhältnis zu der aktuellen Geräte-Orientierung, in drei Dimensionen entlang der *x-*, *y-*und *Z* -Achse.
-
-Der Zugang ist über eine globale `navigator.accelerometer`-Objekt.
-
-Obwohl das Objekt mit der globalen Gültigkeitsbereich `navigator` verbunden ist, steht es nicht bis nach dem `Deviceready`-Ereignis.
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## Installation
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## Unterstützte Plattformen
-
-* Amazon Fire OS
-* Android
-* BlackBerry 10
-* Browser
-* Firefox OS
-* iOS
-* Tizen
-* Windows Phone 8
-* Windows
-
-## Methoden
-
-* navigator.accelerometer.getCurrentAcceleration
-* navigator.accelerometer.watchAcceleration
-* navigator.accelerometer.clearWatch
-
-## Objekte
-
-* Beschleunigung
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Erhalten Sie die aktuelle Beschleunigung entlang der *x-*, *y-* und *z*-Achsen.
-
-Diese Beschleunigungswerte werden an die `accelerometerSuccess`-Callback-Funktion zurückgegeben.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### Beispiel
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### Browser-Eigenheiten
-
-Werte für X, Y, Z-Bewegung sind alle zufällig generierten in Ordnung, den Beschleunigungsmesser zu simulieren.
-
-### iOS Macken
-
-* iOS erkennt nicht das Konzept die aktuelle Beschleunigung zu einem bestimmten Zeitpunkt zu bekommen.
-
-* Müssen Sie die Beschleunigung zu sehen und erfassen die Daten zu bestimmten Zeitintervallen.
-
-* So die `getCurrentAcceleration` -Funktion führt zu den letzten Wert berichtet von einer `watchAccelerometer` rufen.
-
-## navigator.accelerometer.watchAcceleration
-
-Ruft das Gerät aktuelle `Accelerometer` in regelmäßigen Abständen, die `accelerometerSuccess`-Callback-Funktion jedes Mal ausgeführt. Gibt das Intervall in Millisekunden über das `AcceleratorOptions`-Objekt-`frequency`-Parameter.
-
-Die zurückgegebenen Watch-ID verweist der Beschleunigungsmesser Uhr Intervall und kann mit `navigator.accelerometer.clearWatch` um zu stoppen, beobachten den Beschleunigungsmesser verwendet werden.
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
-* **accelerometerOptions**: Ein Objekt mit den folgenden optionalen Elementen:
- * **Zeitraum**: gewünschten Zeitraum der Aufrufe von AccelerometerSuccess mit Beschleunigungsdaten in Millisekunden. *(Anzahl)* (Default: 10000)
-
-### Beispiel
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS Macken
-
-Die API ruft die Erfolg-Callback-Funktion im Intervall angefordert, aber schränkt den Bereich der Anforderungen an das Gerät zwischen 40ms und 1000ms. Beispielsweise wenn Sie ein Intervall von 3 Sekunden, (3000ms), beantragen die API fordert Daten vom Gerät jede 1 Sekunde, aber nur den Erfolg-Rückruf führt alle 3 Sekunden.
-
-## navigator.accelerometer.clearWatch
-
-Hör auf, beobachten die `Beschleunigung` durch den `watchID`-Parameter verwiesen.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-* **WatchID**: die ID von zurückgegeben`navigator.accelerometer.watchAcceleration`.
-
-### Beispiel
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## Beschleunigung
-
-Zu einem bestimmten Zeitpunkt im Zeit erfasste `Accelerometer`-Daten enthält. Beschleunigungswerte sind die Auswirkungen der Schwerkraft (9.81 m/s ^ 2), so dass wenn ein Gerät flach und nach oben, *X*, *y liegt*, und *Z*-Werte zurückgegeben werden, ``, `` und `9.81 sollte`.
-
-### Eigenschaften
-
-* **X**: Betrag der Beschleunigung auf der x-Achse. (in m/s ^ 2) *(Anzahl)*
-* **y**: Betrag der Beschleunigung auf der y-Achse. (in m/s ^ 2) *(Anzahl)*
-* **Z**: Betrag der Beschleunigung auf die z-Achse. (in m/s ^ 2) *(Anzahl)*
-* **Timestamp**: Zeitstempel der Erstellung in Millisekunden. *(DOMTimeStamp)*
diff --git a/doc/es/README.md b/doc/es/README.md
deleted file mode 100644
index 1d8793d..0000000
--- a/doc/es/README.md
+++ /dev/null
@@ -1,159 +0,0 @@
-<!---
-# license: Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
--->
-
-# cordova-plugin-device-motion
-
-[![Build Status](https://travis-ci.org/apache/cordova-plugin-device-motion.svg)](https://travis-ci.org/apache/cordova-plugin-device-motion)
-
-Este plugin proporciona acceso a acelerómetro del dispositivo. El acelerómetro es un sensor de movimiento que detecta el cambio (*delta*) en movimiento con respecto a la orientación actual del dispositivo, en tres dimensiones sobre el eje *x*, *y*y *z* .
-
-El acceso es por un global `navigator.accelerometer` objeto.
-
-Aunque el objeto está unido al ámbito global `navigator` , no estará disponible hasta después de la `deviceready` evento.
-
- document.addEventListener ("deviceready", onDeviceReady, false);
- function onDeviceReady() {console.log(navigator.accelerometer)};
-
-
-## Instalación
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## Plataformas soportadas
-
- * Amazon fire OS
- * Android
- * BlackBerry 10
- * Explorador
- * Firefox OS
- * iOS
- * Tizen
- * Windows Phone 8
- * Windows
-
-## Métodos
-
- * navigator.accelerometer.getCurrentAcceleration
- * navigator.accelerometer.watchAcceleration
- * navigator.accelerometer.clearWatch
-
-## Objetos
-
- * Acceleration
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Tienes la aceleración actual a lo largo de los ejes *x*, *y*y *z* .
-
-Estos valores de aceleración son devueltos a la `accelerometerSuccess` función de callback.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### Ejemplo
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### Navegador rarezas
-
-Los valores para X, Y, movimiento Z son todo generada aleatoriamente en orden para simular el acelerómetro.
-
-### iOS rarezas
-
- * iOS no reconoce el concepto de conseguir la aceleración actual en cualquier momento dado.
-
- * Debes ver la aceleración y capturar los datos en determinados intervalos de tiempo.
-
- * Así, la función de `getCurrentAcceleration` rinde el último valor informado de una llamada de `watchAccelerometer`.
-
-## navigator.accelerometer.watchAcceleration
-
-Recupera el dispositivo actual de `Acceleration` a intervalos regulares, ejecutar el `accelerometerSuccess` función callback cada vez. Especificar el intervalo en milisegundos mediante la `acceleratorOptions` del objeto `frequency` parámetro.
-
-El vuelto ver referencias ID intervalo del acelerómetro reloj y puede ser utilizado con `navigator.accelerometer.clearWatch` para dejar de ver el acelerómetro.
-
- var watchID = navigator.accelerometer.watchAcceleration (accelerometerSuccess, accelerometerError, accelerometerOptions);
-
-
- * **accelerometerOptions**: Un objeto con las llaves opcionales siguientes:
- * **periodo**: periodo solicitado de llamadas a accelerometerSuccess con los datos de aceleración en milisegundos. *(Número)* (Por defecto: 10000)
-
-### Ejemplo
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS rarezas
-
-La API llama a la función de devolución de llamada de éxito en el intervalo solicitado, pero restringe la gama de solicitudes que el dispositivo entre 40ms y 1000ms. Por ejemplo, si usted solicita un intervalo de 3 segundos, (3000ms), la API solicita datos desde el dispositivo cada 1 segundo, pero sólo ejecuta el callback de éxito cada 3 segundos.
-
-## navigator.accelerometer.clearWatch
-
-Dejar de mirar el `Acceleration` referenciado por el `watchID` parámetro.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
- * **watchID**: el identificador devuelto por`navigator.accelerometer.watchAcceleration`.
-
-### Ejemplo
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## Acceleration
-
-Contiene `Accelerometer` datos capturados en un punto específico en el tiempo. Valores de aceleración incluyen el efecto de la gravedad (9,81 m/s ^ 2), de modo que cuando se encuentra un dispositivo plano y hacia arriba, *x*, *y*, y *z* valores devueltos deben ser `` , `` , y`9.81`.
-
-### Propiedades
-
- * **x**: Cantidad de aceleración en el eje X. (en m/s^2) *(Number)*
- * **y**: Cantidad de aceleración en el eje Y. (en m/s^2) *(Number)*
- * **z**: Cantidad de aceleración en el eje Z. (en m/s^2) *(Number)*
- * **timestamp**: Momento de la captura en milisegundos.*(DOMTimeStamp)*
\ No newline at end of file
diff --git a/doc/es/index.md b/doc/es/index.md
deleted file mode 100644
index 5f15dff..0000000
--- a/doc/es/index.md
+++ /dev/null
@@ -1,139 +0,0 @@
-<!---
- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-# cordova-plugin-device-motion
-
-Este plugin proporciona acceso a acelerómetro del dispositivo. El acelerómetro es un sensor de movimiento que detecta el cambio (*delta*) en movimiento con respecto a la orientación actual del dispositivo, en tres dimensiones sobre el eje *x*, *y*y *z* .
-
-El acceso es por un global `navigator.accelerometer` objeto.
-
-Aunque el objeto está unido al ámbito global `navigator` , no estará disponible hasta después de la `deviceready` evento.
-
- document.addEventListener ("deviceready", onDeviceReady, false);
- function onDeviceReady() {console.log(navigator.accelerometer)};
-
-
-## Instalación
-
- Cordova plugin añade cordova-plugin-device-movimiento
-
-
-## Plataformas soportadas
-
-* Amazon fire OS
-* Android
-* BlackBerry 10
-* Explorador
-* Firefox OS
-* iOS
-* Tizen
-* Windows Phone 8
-* Windows
-
-## Métodos
-
-* navigator.accelerometer.getCurrentAcceleration
-* navigator.accelerometer.watchAcceleration
-* navigator.accelerometer.clearWatch
-
-## Objetos
-
-* Acceleration
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Tienes la aceleración actual a lo largo de los ejes *x*, *y*y *z* .
-
-Estos valores de aceleración son devueltos a la `accelerometerSuccess` función de callback.
-
- navigator.accelerometer.getCurrentAcceleration (accelerometerSuccess, accelerometerError);
-
-
-### Ejemplo
-
- function onSuccess(acceleration) {alert ('Aceleración X:' + acceleration.x + '\n' + 'Aceleración Y:' + acceleration.y + '\n' + 'Aceleración Z:' + acceleration.z + '\n' + ' Timestamp: ' + acceleration.timestamp + '\n');};
-
- función onError() {alert('onError!');};
-
- navigator.accelerometer.getCurrentAcceleration (onSuccess, onError);
-
-
-### Navegador rarezas
-
-Los valores para X, Y, movimiento Z son todo generada aleatoriamente en orden para simular el acelerómetro.
-
-### iOS rarezas
-
-* iOS no reconoce el concepto de conseguir la aceleración actual en cualquier momento dado.
-
-* Debes ver la aceleración y capturar los datos en determinados intervalos de tiempo.
-
-* Así, la función de `getCurrentAcceleration` rinde el último valor informado de una llamada de `watchAccelerometer`.
-
-## navigator.accelerometer.watchAcceleration
-
-Recupera el dispositivo actual de `Acceleration` a intervalos regulares, ejecutar el `accelerometerSuccess` función callback cada vez. Especificar el intervalo en milisegundos mediante la `acceleratorOptions` del objeto `frequency` parámetro.
-
-El vuelto ver referencias ID intervalo del acelerómetro reloj y puede ser utilizado con `navigator.accelerometer.clearWatch` para dejar de ver el acelerómetro.
-
- var watchID = navigator.accelerometer.watchAcceleration (accelerometerSuccess, accelerometerError, accelerometerOptions);
-
-
-* **accelerometerOptions**: Un objeto con las llaves opcionales siguientes:
- * **periodo**: periodo solicitado de llamadas a accelerometerSuccess con los datos de aceleración en milisegundos. *(Número)* (Por defecto: 10000)
-
-### Ejemplo
-
- function onSuccess(acceleration) {alert ('Aceleración X:' + acceleration.x + '\n' + 'Aceleración Y:' + acceleration.y + '\n' + 'Aceleración Z:' + acceleration.z + '\n' + ' Timestamp: ' + acceleration.timestamp + '\n');};
-
- función onError() {alert('onError!');};
-
- var opciones = { frequency: 3000 }; Actualizar cada 3 segundos var watchID = navigator.accelerometer.watchAcceleration (onSuccess, onError, opciones);
-
-
-### iOS rarezas
-
-La API llama a la función de devolución de llamada de éxito en el intervalo solicitado, pero restringe la gama de solicitudes que el dispositivo entre 40ms y 1000ms. Por ejemplo, si usted solicita un intervalo de 3 segundos, (3000ms), la API solicita datos desde el dispositivo cada 1 segundo, pero sólo ejecuta el callback de éxito cada 3 segundos.
-
-## navigator.accelerometer.clearWatch
-
-Dejar de mirar el `Acceleration` referenciado por el `watchID` parámetro.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-* **watchID**: el identificador devuelto por`navigator.accelerometer.watchAcceleration`.
-
-### Ejemplo
-
- var watchID = navigator.accelerometer.watchAcceleration (onSuccess, onError, opciones);
-
- ... adelante... navigator.accelerometer.clearWatch(watchID);
-
-
-## Acceleration
-
-Contiene `Accelerometer` datos capturados en un punto específico en el tiempo. Valores de aceleración incluyen el efecto de la gravedad (9,81 m/s ^ 2), de modo que cuando se encuentra un dispositivo plano y hacia arriba, *x*, *y*, y *z* valores devueltos deben ser `` , `` , y`9.81`.
-
-### Propiedades
-
-* **x**: Cantidad de aceleración en el eje X. (en m/s^2) *(Number)*
-* **y**: Cantidad de aceleración en el eje Y. (en m/s^2) *(Number)*
-* **z**: Cantidad de aceleración en el eje Z. (en m/s^2) *(Number)*
-* **timestamp**: Momento de la captura en milisegundos.*(DOMTimeStamp)*
diff --git a/doc/fr/README.md b/doc/fr/README.md
deleted file mode 100644
index 82f2488..0000000
--- a/doc/fr/README.md
+++ /dev/null
@@ -1,141 +0,0 @@
-<!---
-# license: Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
--->
-
-# cordova-plugin-device-motion
-
-[![Build Status](https://travis-ci.org/apache/cordova-plugin-device-motion.svg)](https://travis-ci.org/apache/cordova-plugin-device-motion)
-
-Ce plugin permet d'accéder à l'accéléromètre de l'appareil. L'accéléromètre est un capteur de mouvement qui détecte la modification (*delta*) en mouvement par rapport à l'orientation actuelle de l'appareil, en trois dimensions le long de l'axe *x*, *y*et *z* .
-
-Accès se fait par un global `navigator.accelerometer` objet.
-
-Bien que l'objet est attaché à la portée globale `navigator` , il n'est pas disponible jusqu'après la `deviceready` événement.
-
- document.addEventListener (« deviceready », onDeviceReady, false) ;
- function onDeviceReady() {console.log(navigator.accelerometer);}
-
-
-## Installation
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## Plates-formes supportées
-
- * Amazon Fire OS
- * Android
- * BlackBerry 10
- * Navigateur
- * Firefox OS
- * iOS
- * Paciarelli
- * Windows Phone 8
- * Windows
-
-## Méthodes
-
- * navigator.accelerometer.getCurrentAcceleration
- * navigator.accelerometer.watchAcceleration
- * navigator.accelerometer.clearWatch
-
-## Objets
-
- * Acceleration
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Obtenir l'accélération courante le long des axes *x*, *y*et *z* .
-
-Ces valeurs d'accélération sont retournés à la `accelerometerSuccess` fonction de rappel.
-
- navigator.accelerometer.getCurrentAcceleration (accelerometerSuccess, accelerometerError) ;
-
-
-### Exemple
-
- function onSuccess(acceleration) {alert ("Accélération X:" + acceleration.x + « \n » + "Accélération Y:" + acceleration.y + « \n » + « Accélération Z: » + acceleration.z + « \n » + ' Timestamp: "+ acceleration.timestamp + « \n »);} ;
-
- fonction onError() {alert('onError!');} ;
-
- navigator.accelerometer.getCurrentAcceleration (onSuccess, onError) ;
-
-
-### Bizarreries navigateur
-
-Les valeurs x, Y, motion de Z sont tous ordre généré de manière aléatoire dans pour simuler l'accéléromètre.
-
-### Notes au sujet d'iOS
-
- * iOS ne permet pas d'obtenir l'accélération en cours à un instant donné.
-
- * Vous devez observer l'accélération et capturer ses données à un intervalle de temps donné.
-
- * De ce fait, la fonction `getCurrentAcceleration` renvoie la dernière valeur retournée par un appel à `watchAccelerometer`.
-
-## navigator.accelerometer.watchAcceleration
-
-Récupère le dispositif actuel de `Acceleration` à intervalle régulier, l'exécution de la `accelerometerSuccess` fonction de rappel chaque fois. Spécifiez l'intervalle, en millisecondes, via le `acceleratorOptions` de l'objet `frequency` paramètre.
-
-Le retourné regarder ID références intervalle de surveillance de l'accéléromètre et peut être utilisé avec `navigator.accelerometer.clearWatch` d'arrêter de regarder l'accéléromètre.
-
- var watchID = navigator.accelerometer.watchAcceleration (accelerometerSuccess, accelerometerError, accelerometerOptions) ;
-
-
- * **accelerometerOptions**: Un objet avec les clés facultatives suivantes :
- * **période**: période demandée d'appels à accelerometerSuccess avec les données d'accélération en millisecondes. *(Nombre)* (Par défaut : 10000)
-
-### Exemple
-
- function onSuccess(acceleration) {alert ("Accélération X:" + acceleration.x + « \n » + "Accélération Y:" + acceleration.y + « \n » + « Accélération Z: » + acceleration.z + « \n » + ' Timestamp: "+ acceleration.timestamp + « \n »);} ;
-
- fonction onError() {alert('onError!');} ;
-
- options de var = { frequency: 3000 } ; Mise à jour chaque 3 secondes var watchID = navigator.accelerometer.watchAcceleration (onSuccess, onError, options) ;
-
-
-### Notes au sujet d'iOS
-
-L'API appelle la fonction de rappel de succès à l'intervalle demandé, mais restreint l'éventail des demandes à l'appareil entre 40ms et 1000ms. Par exemple, si vous demandez un intervalle de 3 secondes, (3000ms), l'API demande des données de l'appareil toutes les 1 seconde, mais seulement exécute le rappel réussi toutes les 3 secondes.
-
-## navigator.accelerometer.clearWatch
-
-Arrêter de regarder le `Acceleration` référencé par le `watchID` paramètre.
-
- navigator.accelerometer.clearWatch(watchID) ;
-
-
- * **watchID**: l'ID retourné par`navigator.accelerometer.watchAcceleration`.
-
-### Exemple
-
- var watchID = navigator.accelerometer.watchAcceleration (onSuccess, onError, options) ;
-
- ... plus tard... navigator.accelerometer.clearWatch(watchID) ;
-
-
-## Acceleration
-
-Contient `Accelerometer` données capturées à un point précis dans le temps. Valeurs d'accélération comprennent l'effet de la pesanteur (9,81 m/s ^ 2), de sorte que lorsqu'un périphérique se trouve plat et face vers le haut, *x*, *y*, et *z* valeurs retournées doivent être `` , `` , et`9.81`.
-
-### Propriétés
-
- * **x**: Valeur de l'accélération sur l'axe des x. (en m/s^2) *(Number)*
- * **y**: Valeur de l'accélération sur l'axe des y. (en m/s^2) *(Number)*
- * **y**: Valeur de l'accélération sur l'axe des z. (en m/s^2) *(Number)*
- * **timestamp**: Date de création en millisecondes. *(DOMTimeStamp)*
\ No newline at end of file
diff --git a/doc/fr/index.md b/doc/fr/index.md
deleted file mode 100644
index 880543f..0000000
--- a/doc/fr/index.md
+++ /dev/null
@@ -1,139 +0,0 @@
-<!---
- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-# cordova-plugin-device-motion
-
-Ce plugin permet d'accéder à l'accéléromètre de l'appareil. L'accéléromètre est un capteur de mouvement qui détecte la modification (*delta*) en mouvement par rapport à l'orientation actuelle de l'appareil, en trois dimensions le long de l'axe *x*, *y*et *z* .
-
-Accès se fait par un global `navigator.accelerometer` objet.
-
-Bien que l'objet est attaché à la portée globale `navigator` , il n'est pas disponible jusqu'après la `deviceready` événement.
-
- document.addEventListener (« deviceready », onDeviceReady, false) ;
- function onDeviceReady() {console.log(navigator.accelerometer);}
-
-
-## Installation
-
- Cordova plugin ajouter cordova-plugin-device-motion
-
-
-## Plates-formes prises en charge
-
-* Amazon Fire OS
-* Android
-* BlackBerry 10
-* Navigateur
-* Firefox OS
-* iOS
-* Paciarelli
-* Windows Phone 8
-* Windows
-
-## Méthodes
-
-* navigator.accelerometer.getCurrentAcceleration
-* navigator.accelerometer.watchAcceleration
-* navigator.accelerometer.clearWatch
-
-## Objets
-
-* Acceleration
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Obtenir l'accélération courante le long des axes *x*, *y*et *z* .
-
-Ces valeurs d'accélération sont retournés à la `accelerometerSuccess` fonction de rappel.
-
- navigator.accelerometer.getCurrentAcceleration (accelerometerSuccess, accelerometerError) ;
-
-
-### Exemple
-
- function onSuccess(acceleration) {alert ("Accélération X:" + acceleration.x + « \n » + "Accélération Y:" + acceleration.y + « \n » + « Accélération Z: » + acceleration.z + « \n » + ' Timestamp: "+ acceleration.timestamp + « \n »);} ;
-
- fonction onError() {alert('onError!');} ;
-
- navigator.accelerometer.getCurrentAcceleration (onSuccess, onError) ;
-
-
-### Bizarreries navigateur
-
-Les valeurs x, Y, motion de Z sont tous ordre généré de manière aléatoire dans pour simuler l'accéléromètre.
-
-### iOS Quirks
-
-* iOS ne permet pas d'obtenir l'accélération en cours à un instant donné.
-
-* Vous devez observer l'accélération et capturer ses données à un intervalle de temps donné.
-
-* De ce fait, la fonction `getCurrentAcceleration` renvoie la dernière valeur retournée par un appel à `watchAccelerometer`.
-
-## navigator.accelerometer.watchAcceleration
-
-Récupère le dispositif actuel de `Acceleration` à intervalle régulier, l'exécution de la `accelerometerSuccess` fonction de rappel chaque fois. Spécifiez l'intervalle, en millisecondes, via le `acceleratorOptions` de l'objet `frequency` paramètre.
-
-Le retourné regarder ID références intervalle de surveillance de l'accéléromètre et peut être utilisé avec `navigator.accelerometer.clearWatch` d'arrêter de regarder l'accéléromètre.
-
- var watchID = navigator.accelerometer.watchAcceleration (accelerometerSuccess, accelerometerError, accelerometerOptions) ;
-
-
-* **accelerometerOptions**: Un objet avec les clés facultatives suivantes :
- * **période**: période demandée d'appels à accelerometerSuccess avec les données d'accélération en millisecondes. *(Nombre)* (Par défaut : 10000)
-
-### Exemple
-
- function onSuccess(acceleration) {alert ("Accélération X:" + acceleration.x + « \n » + "Accélération Y:" + acceleration.y + « \n » + « Accélération Z: » + acceleration.z + « \n » + ' Timestamp: "+ acceleration.timestamp + « \n »);} ;
-
- fonction onError() {alert('onError!');} ;
-
- options de var = { frequency: 3000 } ; Mise à jour chaque 3 secondes var watchID = navigator.accelerometer.watchAcceleration (onSuccess, onError, options) ;
-
-
-### iOS Quirks
-
-L'API appelle la fonction de rappel de succès à l'intervalle demandé, mais restreint l'éventail des demandes à l'appareil entre 40ms et 1000ms. Par exemple, si vous demandez un intervalle de 3 secondes, (3000ms), l'API demande des données de l'appareil toutes les 1 seconde, mais seulement exécute le rappel réussi toutes les 3 secondes.
-
-## navigator.accelerometer.clearWatch
-
-Arrêter de regarder le `Acceleration` référencé par le `watchID` paramètre.
-
- navigator.accelerometer.clearWatch(watchID) ;
-
-
-* **watchID**: l'ID retourné par`navigator.accelerometer.watchAcceleration`.
-
-### Exemple
-
- var watchID = navigator.accelerometer.watchAcceleration (onSuccess, onError, options) ;
-
- ... plus tard... navigator.accelerometer.clearWatch(watchID) ;
-
-
-## Accélération
-
-Contient `Accelerometer` données capturées à un point précis dans le temps. Valeurs d'accélération comprennent l'effet de la pesanteur (9,81 m/s ^ 2), de sorte que lorsqu'un périphérique se trouve plat et face vers le haut, *x*, *y*, et *z* valeurs retournées doivent être `` , `` , et`9.81`.
-
-### Propriétés
-
-* **x**: Valeur de l'accélération sur l'axe des x. (en m/s^2) *(Number)*
-* **y**: Valeur de l'accélération sur l'axe des y. (en m/s^2) *(Number)*
-* **y**: Valeur de l'accélération sur l'axe des z. (en m/s^2) *(Number)*
-* **timestamp**: Date de création en millisecondes. *(DOMTimeStamp)*
diff --git a/doc/it/README.md b/doc/it/README.md
deleted file mode 100644
index b350c45..0000000
--- a/doc/it/README.md
+++ /dev/null
@@ -1,163 +0,0 @@
-<!---
-# license: Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
--->
-
-# cordova-plugin-device-motion
-
-[![Build Status](https://travis-ci.org/apache/cordova-plugin-device-motion.svg)](https://travis-ci.org/apache/cordova-plugin-device-motion)
-
-Questo plugin consente di accedere all'accelerometro del dispositivo. L'accelerometro è un sensore di movimento che rileva il cambiamento (*delta*) nel movimento relativo l'orientamento corrente del dispositivo, in tre dimensioni lungo l'asse *x*, *y*e *z* .
-
-L'accesso avviene tramite un oggetto globale `navigator.accelerometer`.
-
-Anche se l'oggetto è associato con ambito globale del `navigator`, non è disponibile fino a dopo l'evento `deviceready`.
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## Installazione
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## Piattaforme supportate
-
- * Amazon fuoco OS
- * Android
- * BlackBerry 10
- * Browser
- * Firefox OS
- * iOS
- * Tizen
- * Windows Phone 8
- * Windows
-
-## Metodi
-
- * navigator.accelerometer.getCurrentAcceleration
- * navigator.accelerometer.watchAcceleration
- * navigator.accelerometer.clearWatch
-
-## Oggetti
-
- * Accelerazione
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Ottenere l'attuale accelerazione lungo gli assi *x*, *y* e *z*.
-
-I valori di accelerazione vengono restituiti alla funzione di callback `accelerometerSuccess`.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### Esempio
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### Stranezze browser
-
-I valori per X, Y, movimento Z sono tutti generati casualmente in ordine per simulare l'accelerometro.
-
-### iOS stranezze
-
- * iOS non riconosce il concetto di ottenere l'accelerazione della corrente in un dato punto.
-
- * Si deve guardare l'accelerazione e acquisire i dati di intervalli di tempo dato.
-
- * Così, il `getCurrentAcceleration` funzione restituisce l'ultimo valore segnalato da un `watchAccelerometer` chiamare.
-
-## navigator.accelerometer.watchAcceleration
-
-Recupera corrente del dispositivo `Acceleration` a intervalli regolari, l'esecuzione della funzione di callback `accelerometerSuccess` ogni volta. Specificare l'intervallo in millisecondi tramite parametro `frequency` dell'oggetto `acceleratorOptions`.
-
-L'orologio restituito ID fa riferimento intervallo orologio di accelerometro e può essere utilizzato con `navigator.accelerometer.clearWatch` a smettere di guardare l'accelerometro.
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
- * **accelerometerOptions**: Un oggetto con le seguenti chiavi opzionali:
- * **periodo**: periodo richiesto di chiamate a accelerometerSuccess con i dati di accelerazione in millisecondi. *(Numero)* (Default: 10000)
-
-### Esempio
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS stranezze
-
-L'API chiama la funzione di callback di successo nell'intervallo richiesto, ma limita la gamma di richieste alla periferica tra 40ms e 1000ms. Ad esempio, se si richiede un intervallo di 3 secondi, (3000ms), l'API richiede i dati dal dispositivo ogni secondo, ma esegue solo il callback di successo ogni 3 secondi.
-
-## navigator.accelerometer.clearWatch
-
-Smettere di guardare l' `Acceleration` a cui fa riferimento il parametro `watchID`.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
- * **watchID**: l'ID restituito da`navigator.accelerometer.watchAcceleration`.
-
-### Esempio
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## Accelerazione
-
-Contiene i dati dell'`Accelerometer` catturati in un punto specifico nel tempo. I valori di accelerazione includono l'effetto della gravità (9,81 m/s ^ 2), in modo che quando un dispositivo si trova piatta e rivolto in su, *x*, *y*, e *z* valori restituiti dovrebbero essere ``, `` e `9,81`.
-
-### Proprietà
-
- * **x**: quantità di accelerazione sull'asse x. (in m/s ^ 2) *(Numero)*
- * **y**: quantità di accelerazione sull'asse y. (in m/s ^ 2) *(Numero)*
- * **z**: quantità di accelerazione sull'asse z. (in m/s ^ 2) *(Numero)*
- * **timestamp**: creazione timestamp in millisecondi. *(DOMTimeStamp)*
\ No newline at end of file
diff --git a/doc/it/index.md b/doc/it/index.md
deleted file mode 100644
index c81cfe0..0000000
--- a/doc/it/index.md
+++ /dev/null
@@ -1,161 +0,0 @@
-<!---
- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-# cordova-plugin-device-motion
-
-Questo plugin consente di accedere all'accelerometro del dispositivo. L'accelerometro è un sensore di movimento che rileva il cambiamento (*delta*) nel movimento relativo l'orientamento corrente del dispositivo, in tre dimensioni lungo l'asse *x*, *y*e *z* .
-
-L'accesso avviene tramite un oggetto globale `navigator.accelerometer`.
-
-Anche se l'oggetto è associato con ambito globale del `navigator`, non è disponibile fino a dopo l'evento `deviceready`.
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## Installazione
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## Piattaforme supportate
-
-* Amazon fuoco OS
-* Android
-* BlackBerry 10
-* Browser
-* Firefox OS
-* iOS
-* Tizen
-* Windows Phone 8
-* Windows
-
-## Metodi
-
-* navigator.accelerometer.getCurrentAcceleration
-* navigator.accelerometer.watchAcceleration
-* navigator.accelerometer.clearWatch
-
-## Oggetti
-
-* Accelerazione
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Ottenere l'attuale accelerazione lungo gli assi *x*, *y* e *z*.
-
-I valori di accelerazione vengono restituiti alla funzione di callback `accelerometerSuccess`.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### Esempio
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### Stranezze Browser
-
-I valori per X, Y, movimento Z sono tutti generati casualmente in ordine per simulare l'accelerometro.
-
-### iOS stranezze
-
-* iOS non riconosce il concetto di ottenere l'accelerazione della corrente in un dato punto.
-
-* Si deve guardare l'accelerazione e acquisire i dati di intervalli di tempo dato.
-
-* Così, il `getCurrentAcceleration` funzione restituisce l'ultimo valore segnalato da un `watchAccelerometer` chiamare.
-
-## navigator.accelerometer.watchAcceleration
-
-Recupera corrente del dispositivo `Acceleration` a intervalli regolari, l'esecuzione della funzione di callback `accelerometerSuccess` ogni volta. Specificare l'intervallo in millisecondi tramite parametro `frequency` dell'oggetto `acceleratorOptions`.
-
-L'orologio restituito ID fa riferimento intervallo orologio di accelerometro e può essere utilizzato con `navigator.accelerometer.clearWatch` a smettere di guardare l'accelerometro.
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
-* **accelerometerOptions**: Un oggetto con le seguenti chiavi opzionali:
- * **periodo**: periodo richiesto di chiamate a accelerometerSuccess con i dati di accelerazione in millisecondi. *(Numero)* (Default: 10000)
-
-### Esempio
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS stranezze
-
-L'API chiama la funzione di callback di successo nell'intervallo richiesto, ma limita la gamma di richieste alla periferica tra 40ms e 1000ms. Ad esempio, se si richiede un intervallo di 3 secondi, (3000ms), l'API richiede i dati dal dispositivo ogni secondo, ma esegue solo il callback di successo ogni 3 secondi.
-
-## navigator.accelerometer.clearWatch
-
-Smettere di guardare l' `Acceleration` a cui fa riferimento il parametro `watchID`.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-* **watchID**: l'ID restituito da`navigator.accelerometer.watchAcceleration`.
-
-### Esempio
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## Accelerazione
-
-Contiene i dati dell'`Accelerometer` catturati in un punto specifico nel tempo. I valori di accelerazione includono l'effetto della gravità (9,81 m/s ^ 2), in modo che quando un dispositivo si trova piatta e rivolto in su, *x*, *y*, e *z* valori restituiti dovrebbero essere ``, `` e `9,81`.
-
-### Proprietà
-
-* **x**: quantità di accelerazione sull'asse x. (in m/s ^ 2) *(Numero)*
-* **y**: quantità di accelerazione sull'asse y. (in m/s ^ 2) *(Numero)*
-* **z**: quantità di accelerazione sull'asse z. (in m/s ^ 2) *(Numero)*
-* **timestamp**: creazione timestamp in millisecondi. *(DOMTimeStamp)*
diff --git a/doc/ja/README.md b/doc/ja/README.md
deleted file mode 100644
index d6c66e7..0000000
--- a/doc/ja/README.md
+++ /dev/null
@@ -1,163 +0,0 @@
-<!---
-# license: Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
--->
-
-# cordova-plugin-device-motion
-
-[![Build Status](https://travis-ci.org/apache/cordova-plugin-device-motion.svg)](https://travis-ci.org/apache/cordova-plugin-device-motion)
-
-このプラグインは、デバイスの加速度計へのアクセスを提供します。 加速度計の現在のデバイスの向き、 *x* *y*、および*z*軸に沿って 3 つの次元の相対運動の変更 (*デルタ*) を検出するモーション センサーです。
-
-アクセスは、グローバル `navigator.accelerometer` オブジェクトを介して。
-
-オブジェクトは、グローバル スコープの `ナビゲーター` に添付、それがないまで `deviceready` イベントの後。
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## インストール
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## サポートされているプラットフォーム
-
- * アマゾン火 OS
- * アンドロイド
- * ブラックベリー 10
- * ブラウザー
- * Firefox の OS
- * iOS
- * Tizen
- * Windows Phone 8
- * Windows
-
-## メソッド
-
- * navigator.accelerometer.getCurrentAcceleration
- * navigator.accelerometer.watchAcceleration
- * navigator.accelerometer.clearWatch
-
-## オブジェクト
-
- * 加速
-
-## navigator.accelerometer.getCurrentAcceleration
-
-*X* *y*、および *z* 軸に沿って現在の加速を取得します。
-
-これらの加速度値が `accelerometerSuccess` コールバック関数に返されます。
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### 例
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### ブラウザーの癖
-
-値 X、Y、Z モーションは、加速度計をシミュレートするためにすべてのランダムに生成される順序です。
-
-### iOS の癖
-
- * iOS は、任意の時点で現在の加速度を得ることの概念を認識しません。
-
- * 加速度を見るし、データをキャプチャする必要があります指定した時間間隔で。
-
- * したがって、 `getCurrentAcceleration` 関数から報告された最後の値が生成されます、 `watchAccelerometer` を呼び出します。
-
-## navigator.accelerometer.watchAcceleration
-
-たびに `accelerometerSuccess` コールバック関数を実行する定期的な間隔で、デバイスの現在の `Acceleration` を取得します。 `acceleratorOptions` オブジェクトの `frquency` パラメーターを介してミリ秒単位で間隔を指定します。
-
-返される時計 ID、加速度計腕時計間隔を参照し、加速度計を見て停止する `navigator.accelerometer.clearWatch` を使用することができます。
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
- * **accelerometerOptions**: 次のオプションのキーを持つオブジェクト:
- * **期間**: ミリ秒単位での加速度データと accelerometerSuccess への呼び出しの要求された期間。*(数)*(デフォルト: 10000)
-
-### 例
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS の癖
-
-API は、要求された間隔で、成功コールバック関数を呼び出しますが 40 ms の間デバイスへの要求の範囲を制限し、1000 ミリ秒になります。 たとえば、(ms) 3 秒の間隔を要求した場合、API 1 秒ごとに、デバイスからデータを要求がのみ成功コールバック 3 秒ごとを実行します。
-
-## navigator.accelerometer.clearWatch
-
-`watchID` パラメーターによって参照される `加速` を見て停止します。
-
- navigator.accelerometer.clearWatch(watchID);
-
-
- * **watchID**: によって返される ID`navigator.accelerometer.watchAcceleration`.
-
-### 例
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## 加速
-
-特定の時点でキャプチャした `Accelerometer` データが含まれています。 加速度値のとおり重力の効果 (9.81 m/s ^2) デバイスにあるフラットと *x* *y*、直面していると返された *z* 値は `` ``、および `9.81` をする必要がありますように、.
-
-### プロパティ
-
- * **x**: x 軸の加速度の量です。(m/s ^2)*(数)*
- * **y**: y 軸の加速度の量です。(m/s ^2)*(数)*
- * **z**: z 軸の加速度の量です。(m/s ^2)*(数)*
- * **タイムスタンプ**: 作成時のタイムスタンプ (ミリ秒単位)。*(,)*
\ No newline at end of file
diff --git a/doc/ja/index.md b/doc/ja/index.md
deleted file mode 100644
index 4dc0289..0000000
--- a/doc/ja/index.md
+++ /dev/null
@@ -1,161 +0,0 @@
-<!---
- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-# cordova-plugin-device-motion
-
-このプラグインは、デバイスの加速度計へのアクセスを提供します。 加速度計の現在のデバイスの向き、 *x* *y*、および*z*軸に沿って 3 つの次元の相対運動の変更 (*デルタ*) を検出するモーション センサーです。
-
-アクセスは、グローバル `navigator.accelerometer` オブジェクトを介して。
-
-オブジェクトは、グローバル スコープの `ナビゲーター` に添付、それがないまで `deviceready` イベントの後。
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## インストール
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## サポートされているプラットフォーム
-
-* アマゾン火 OS
-* アンドロイド
-* ブラックベリー 10
-* ブラウザー
-* Firefox の OS
-* iOS
-* Tizen
-* Windows Phone 8
-* Windows
-
-## メソッド
-
-* navigator.accelerometer.getCurrentAcceleration
-* navigator.accelerometer.watchAcceleration
-* navigator.accelerometer.clearWatch
-
-## オブジェクト
-
-* 加速
-
-## navigator.accelerometer.getCurrentAcceleration
-
-*X* *y*、および *z* 軸に沿って現在の加速を取得します。
-
-これらの加速度値が `accelerometerSuccess` コールバック関数に返されます。
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### 例
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### ブラウザーの癖
-
-値 X、Y、Z モーションは、加速度計をシミュレートするためにすべてのランダムに生成される順序です。
-
-### iOS の癖
-
-* iOS は、任意の時点で現在の加速度を得ることの概念を認識しません。
-
-* 加速度を見るし、データをキャプチャする必要があります指定した時間間隔で。
-
-* したがって、 `getCurrentAcceleration` 関数から報告された最後の値が生成されます、 `watchAccelerometer` を呼び出します。
-
-## navigator.accelerometer.watchAcceleration
-
-たびに `accelerometerSuccess` コールバック関数を実行する定期的な間隔で、デバイスの現在の `Acceleration` を取得します。 `acceleratorOptions` オブジェクトの `frquency` パラメーターを介してミリ秒単位で間隔を指定します。
-
-返される時計 ID、加速度計腕時計間隔を参照し、加速度計を見て停止する `navigator.accelerometer.clearWatch` を使用することができます。
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
-* **accelerometerOptions**: 次のオプションのキーを持つオブジェクト:
- * **期間**: ミリ秒単位での加速度データと accelerometerSuccess への呼び出しの要求された期間。*(数)*(デフォルト: 10000)
-
-### 例
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS の癖
-
-API は、要求された間隔で、成功コールバック関数を呼び出しますが 40 ms の間デバイスへの要求の範囲を制限し、1000 ミリ秒になります。 たとえば、(ms) 3 秒の間隔を要求した場合、API 1 秒ごとに、デバイスからデータを要求がのみ成功コールバック 3 秒ごとを実行します。
-
-## navigator.accelerometer.clearWatch
-
-`watchID` パラメーターによって参照される `加速` を見て停止します。
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-* **watchID**: によって返される ID`navigator.accelerometer.watchAcceleration`.
-
-### 例
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## 加速
-
-特定の時点でキャプチャした `Accelerometer` データが含まれています。 加速度値のとおり重力の効果 (9.81 m/s ^2) デバイスにあるフラットと *x* *y*、直面していると返された *z* 値は `` ``、および `9.81` をする必要がありますように、.
-
-### プロパティ
-
-* **x**: x 軸の加速度の量です。(m/s ^2)*(数)*
-* **y**: y 軸の加速度の量です。(m/s ^2)*(数)*
-* **z**: z 軸の加速度の量です。(m/s ^2)*(数)*
-* **タイムスタンプ**: 作成時のタイムスタンプ (ミリ秒単位)。*(,)*
diff --git a/doc/ko/README.md b/doc/ko/README.md
deleted file mode 100644
index a62c7ea..0000000
--- a/doc/ko/README.md
+++ /dev/null
@@ -1,163 +0,0 @@
-<!---
-# license: Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
--->
-
-# cordova-plugin-device-motion
-
-[![Build Status](https://travis-ci.org/apache/cordova-plugin-device-motion.svg)](https://travis-ci.org/apache/cordova-plugin-device-motion)
-
-이 플러그인 장치의 속도계에 대 한 액세스를 제공합니다. 가 속도계 3 차원 *x*, *y*및 *z* 축 따라 현재 장치 방향 기준으로 이동 (*델타*) 변경 내용을 감지 하는 모션 센서입니다.
-
-글로벌 `navigator.accelerometer` 개체를 통해 액세스가입니다.
-
-개체 `navigator` 글로벌 범위 첨부 아니에요 때까지 사용할 수 있는 `deviceready` 이벤트 후.
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## 설치
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## 지원 되는 플랫폼
-
- * 아마존 화재 운영 체제
- * 안 드 로이드
- * 블랙베리 10
- * 브라우저
- * Firefox 운영 체제
- * iOS
- * Tizen
- * Windows Phone 8
- * 윈도우
-
-## 메서드
-
- * navigator.accelerometer.getCurrentAcceleration
- * navigator.accelerometer.watchAcceleration
- * navigator.accelerometer.clearWatch
-
-## 개체
-
- * 가속
-
-## navigator.accelerometer.getCurrentAcceleration
-
-*X*, *y* 및 *z* 축 따라 현재 가속도 얻을.
-
-이 가속도 값이 `accelerometerSuccess` 콜백 함수에 반환 됩니다.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### 예를 들어
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### 브라우저 만지면
-
-X, Y 값 Z 모션은가 속도계 시뮬레이션 모든에 임의로 생성 된 순서입니다.
-
-### iOS 단점
-
- * iOS는 어떤 주어진된 시점에서 현재 가속도의 개념을 인식 하지 못합니다.
-
- * 가속을 감시 하며 데이터 캡처에 주어진 시간 간격.
-
- * 따라서,는 `getCurrentAcceleration` 에서 보고 된 마지막 값을 생성 하는 함수는 `watchAccelerometer` 전화.
-
-## navigator.accelerometer.watchAcceleration
-
-때마다 `accelerometerSuccess` 콜백 함수를 실행 정기적 소자의 현재 `Acceleration`을 검색 합니다. `acceleratorOptions` 개체의 `frequency` 매개 변수를 통해 밀리초 단위로 간격을 지정 합니다.
-
-반환 된 시계 ID가 속도계의 시계 간격을 참조 하 고가 속도계를 보는 중지 하 `navigator.accelerometer.clearWatch`와 함께 사용할 수 있습니다.
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
- * **accelerometerOptions**: 다음 선택적 키 개체:
- * **기간**: 밀리초에서 가속 데이터와 accelerometerSuccess에 대 한 호출의 요청된 기간. *(수)* (기본: 10000)
-
-### 예를 들어
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS 단점
-
-API 요청 간격 성공 콜백 함수를 호출 하지만 40ms 사이 장치에 요청의 범위를 제한 하 고 1000ms. 예를 들어 (3000ms) 3 초의 간격을 요청 하는 경우 API 마다 1 초 장치에서 데이터를 요청 하지만 성공 콜백을 3 초 마다 실행 됩니다.
-
-## navigator.accelerometer.clearWatch
-
-`watchID` 매개 변수에서 참조 `가속도` 보고 중지 합니다.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
- * **watchID**: ID 반환`navigator.accelerometer.watchAcceleration`.
-
-### 예를 들어
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## 가속
-
-특정 시점에 캡처된 `Accelerometer` 데이터를 포함 합니다. 가속도 값 포함 중력의 효과 (9.81 m/s ^2) 때 장치 거짓말 평평 하 고 *x*, *y*, 최대 직면 하 고 반환 하는 *z* 값 ``, `` 및 `9.81` 이어야 한다,.
-
-### 속성
-
- * **x**: x 축에 가속의 금액. (m/s에서 ^2) *(수)*
- * **y**: y 축에 가속의 금액. (m/s에서 ^2) *(수)*
- * **z**: z 축의 가속도의 금액. (m/s에서 ^2) *(수)*
- * **타임 스탬프**: 생성 타임 스탬프 (밀리초)입니다. *(DOMTimeStamp)*
\ No newline at end of file
diff --git a/doc/ko/index.md b/doc/ko/index.md
deleted file mode 100644
index 3ada49d..0000000
--- a/doc/ko/index.md
+++ /dev/null
@@ -1,161 +0,0 @@
-<!---
- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-# cordova-plugin-device-motion
-
-이 플러그인 장치의 속도계에 대 한 액세스를 제공합니다. 가 속도계 3 차원 *x*, *y*및 *z* 축 따라 현재 장치 방향 기준으로 이동 (*델타*) 변경 내용을 감지 하는 모션 센서입니다.
-
-글로벌 `navigator.accelerometer` 개체를 통해 액세스가입니다.
-
-개체 `navigator` 글로벌 범위 첨부 아니에요 때까지 사용할 수 있는 `deviceready` 이벤트 후.
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## 설치
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## 지원 되는 플랫폼
-
-* 아마존 화재 운영 체제
-* 안 드 로이드
-* 블랙베리 10
-* 브라우저
-* Firefox 운영 체제
-* iOS
-* Tizen
-* Windows Phone 8
-* 윈도우
-
-## 메서드
-
-* navigator.accelerometer.getCurrentAcceleration
-* navigator.accelerometer.watchAcceleration
-* navigator.accelerometer.clearWatch
-
-## 개체
-
-* 가속
-
-## navigator.accelerometer.getCurrentAcceleration
-
-*X*, *y* 및 *z* 축 따라 현재 가속도 얻을.
-
-이 가속도 값이 `accelerometerSuccess` 콜백 함수에 반환 됩니다.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### 예를 들어
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### 브라우저 만지면
-
-X, Y 값 Z 모션은가 속도계 시뮬레이션 모든에 임의로 생성 된 순서입니다.
-
-### iOS 단점
-
-* iOS는 어떤 주어진된 시점에서 현재 가속도의 개념을 인식 하지 못합니다.
-
-* 가속을 감시 하며 데이터 캡처에 주어진 시간 간격.
-
-* 따라서,는 `getCurrentAcceleration` 에서 보고 된 마지막 값을 생성 하는 함수는 `watchAccelerometer` 전화.
-
-## navigator.accelerometer.watchAcceleration
-
-때마다 `accelerometerSuccess` 콜백 함수를 실행 정기적 소자의 현재 `Acceleration`을 검색 합니다. `acceleratorOptions` 개체의 `frequency` 매개 변수를 통해 밀리초 단위로 간격을 지정 합니다.
-
-반환 된 시계 ID가 속도계의 시계 간격을 참조 하 고가 속도계를 보는 중지 하 `navigator.accelerometer.clearWatch`와 함께 사용할 수 있습니다.
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
-* **accelerometerOptions**: 다음 선택적 키 개체:
- * **기간**: 밀리초에서 가속 데이터와 accelerometerSuccess에 대 한 호출의 요청된 기간. *(수)* (기본: 10000)
-
-### 예를 들어
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS 단점
-
-API 요청 간격 성공 콜백 함수를 호출 하지만 40ms 사이 장치에 요청의 범위를 제한 하 고 1000ms. 예를 들어 (3000ms) 3 초의 간격을 요청 하는 경우 API 마다 1 초 장치에서 데이터를 요청 하지만 성공 콜백을 3 초 마다 실행 됩니다.
-
-## navigator.accelerometer.clearWatch
-
-`watchID` 매개 변수에서 참조 `가속도` 보고 중지 합니다.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-* **watchID**: ID 반환`navigator.accelerometer.watchAcceleration`.
-
-### 예를 들어
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## 가속
-
-특정 시점에 캡처된 `Accelerometer` 데이터를 포함 합니다. 가속도 값 포함 중력의 효과 (9.81 m/s ^2) 때 장치 거짓말 평평 하 고 *x*, *y*, 최대 직면 하 고 반환 하는 *z* 값 ``, `` 및 `9.81` 이어야 한다,.
-
-### 속성
-
-* **x**: x 축에 가속의 금액. (m/s에서 ^2) *(수)*
-* **y**: y 축에 가속의 금액. (m/s에서 ^2) *(수)*
-* **z**: z 축의 가속도의 금액. (m/s에서 ^2) *(수)*
-* **타임 스탬프**: 생성 타임 스탬프 (밀리초)입니다. *(DOMTimeStamp)*
diff --git a/doc/pl/README.md b/doc/pl/README.md
deleted file mode 100644
index d2c6758..0000000
--- a/doc/pl/README.md
+++ /dev/null
@@ -1,163 +0,0 @@
-<!---
-# license: Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
--->
-
-# cordova-plugin-device-motion
-
-[![Build Status](https://travis-ci.org/apache/cordova-plugin-device-motion.svg)](https://travis-ci.org/apache/cordova-plugin-device-motion)
-
-Ten plugin umożliwia dostęp do akcelerometru. Akcelerometr jest czujnikiem ruchu, który wykrywa zmiany (*delta*) w ruchu względem bieżącej orientacji urządzenia, w trzech wymiarach na osi *x*, *y*i *z* .
-
-Dostęp odbywa się za pomocą obiektu globalnego `navigator.accelerometer`.
-
-Mimo, że obiekt jest dołączony do globalnego zakresu `navigator`, to nie dostępne dopiero po zdarzeniu `deviceready`.
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## Instalacja
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## Obsługiwane platformy
-
- * Amazon Fire OS
- * Android
- * BlackBerry 10
- * Przeglądarka
- * Firefox OS
- * iOS
- * Tizen
- * Windows Phone 8
- * Windows
-
-## Metody
-
- * navigator.accelerometer.getCurrentAcceleration
- * navigator.accelerometer.watchAcceleration
- * navigator.accelerometer.clearWatch
-
-## Obiekty
-
- * Acceleration
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Uzyskać aktualne przyspieszenie wzdłuż osi *x*, *y* i *z*.
-
-Te wartości przyspieszenia są zwracane do funkcji wywołania zwrotnego `accelerometerSuccess`.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### Przykład
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### Quirks przeglądarki
-
-Wartości dla osi X, Y, Z ruchu są losowo generowane w celu symulacji akcelerometr.
-
-### Dziwactwa iOS
-
- * W iOS nie wprowadzono możliwości zmierzenia aktualnego przyspieszenia w dowolnym punkcie.
-
- * Musisz obserwować przyspieszenie i odbierać wyniki w określonych odstępach czasu.
-
- * Podsumowując, funkcja `getCurrentAcceleration` zwraca ostatnią wartość zgłoszoną przez wywołanie `watchAccelerometer`.
-
-## navigator.accelerometer.watchAcceleration
-
-Pobiera bieżącego urządzenia `Acceleration` w regularnych odstępach czasu, wykonywanie funkcji wywołania zwrotnego `accelerometerSuccess` każdorazowe. Określ interwał w milisekundach przez parametr obiektu `acceleratorOptions` `frequency`.
-
-Identyfikator zwrócony zegarek odwołuje akcelerometr zegarek interwał i może być używany z `navigator.accelerometer.clearWatch`, aby zatrzymać obejrzeniu akcelerometru.
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
- * **accelerometerOptions**: Obiekt z następującymi opcjonalnymi kluczami:
- * **okres**: żądany okres wzywa do accelerometerSuccess z danych przyspieszenia w milisekundach. *(Liczba)* (Domyślnie: 10000)
-
-### Przykład
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### Dziwactwa iOS
-
-Interfejs API wymaga sukcesu funkcji wywołania zwrotnego w interwał żądana, ale ogranicza zakres żądania do urządzenia między 40ms i 1000ms. Na przykład jeśli poprosisz o odstępie 3 sekundy (3000ms), interfejs API żądania danych z urządzenia co 1 sekundę, ale tylko wykonuje wywołanie zwrotne sukces co 3 sekundy.
-
-## navigator.accelerometer.clearWatch
-
-Przestać oglądać `Acceleration` określany przez parametr `watchID`.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
- * **watchID**: Identyfikator zwrócony przez `navigator.accelerometer.watchAcceleration`.
-
-### Przykład
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## Acceleration
-
-Zawiera `Accelerometer` dane przechwycone w określonym czasie. Wartości przyśpieszenia to efekt grawitacji (9.81 m/s ^ 2), tak, że kiedy urządzenie znajduje się płaska i górę, *x*, *y*, i *z* wartości zwracane powinno być ``, `` i `9.81`.
-
-### Właściwości
-
- * **x**: Wartość przyśpieszenia na osi x. (w m/s^2) *(Liczba)*
- * **y**: Wartość przyśpieszenia na osi y. (w m/s^2) *(Liczba)*
- * **z**: Wartość przyśpieszenia na osi z. (w m/s^2) *(Liczba)*
- * **timestamp**: Znacznik czasu w milisekundach. *(DOMTimeStamp)*
\ No newline at end of file
diff --git a/doc/pl/index.md b/doc/pl/index.md
deleted file mode 100644
index 2d204a5..0000000
--- a/doc/pl/index.md
+++ /dev/null
@@ -1,161 +0,0 @@
-<!---
- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-# cordova-plugin-device-motion
-
-Ten plugin umożliwia dostęp do akcelerometru. Akcelerometr jest czujnikiem ruchu, który wykrywa zmiany (*delta*) w ruchu względem bieżącej orientacji urządzenia, w trzech wymiarach na osi *x*, *y*i *z* .
-
-Dostęp odbywa się za pomocą obiektu globalnego `navigator.accelerometer`.
-
-Mimo, że obiekt jest dołączony do globalnego zakresu `navigator`, to nie dostępne dopiero po zdarzeniu `deviceready`.
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## Instalacja
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## Obsługiwane platformy
-
-* Amazon Fire OS
-* Android
-* BlackBerry 10
-* Przeglądarka
-* Firefox OS
-* iOS
-* Tizen
-* Windows Phone 8
-* Windows
-
-## Metody
-
-* navigator.accelerometer.getCurrentAcceleration
-* navigator.accelerometer.watchAcceleration
-* navigator.accelerometer.clearWatch
-
-## Obiekty
-
-* Acceleration
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Uzyskać aktualne przyspieszenie wzdłuż osi *x*, *y* i *z*.
-
-Te wartości przyspieszenia są zwracane do funkcji wywołania zwrotnego `accelerometerSuccess`.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### Przykład
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### Quirks przeglądarki
-
-Wartości dla osi X, Y, Z ruchu są losowo generowane w celu symulacji akcelerometr.
-
-### Dziwactwa iOS
-
-* W iOS nie wprowadzono możliwości zmierzenia aktualnego przyspieszenia w dowolnym punkcie.
-
-* Musisz obserwować przyspieszenie i odbierać wyniki w określonych odstępach czasu.
-
-* Podsumowując, funkcja `getCurrentAcceleration` zwraca ostatnią wartość zgłoszoną przez wywołanie `watchAccelerometer`.
-
-## navigator.accelerometer.watchAcceleration
-
-Pobiera bieżącego urządzenia `Acceleration` w regularnych odstępach czasu, wykonywanie funkcji wywołania zwrotnego `accelerometerSuccess` każdorazowe. Określ interwał w milisekundach przez parametr obiektu `acceleratorOptions` `frequency`.
-
-Identyfikator zwrócony zegarek odwołuje akcelerometr zegarek interwał i może być używany z `navigator.accelerometer.clearWatch`, aby zatrzymać obejrzeniu akcelerometru.
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
-* **accelerometerOptions**: Obiekt z następującymi opcjonalnymi kluczami:
- * **okres**: żądany okres wzywa do accelerometerSuccess z danych przyspieszenia w milisekundach. *(Liczba)* (Domyślnie: 10000)
-
-### Przykład
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### Dziwactwa iOS
-
-Interfejs API wymaga sukcesu funkcji wywołania zwrotnego w interwał żądana, ale ogranicza zakres żądania do urządzenia między 40ms i 1000ms. Na przykład jeśli poprosisz o odstępie 3 sekundy (3000ms), interfejs API żądania danych z urządzenia co 1 sekundę, ale tylko wykonuje wywołanie zwrotne sukces co 3 sekundy.
-
-## navigator.accelerometer.clearWatch
-
-Przestać oglądać `Acceleration` określany przez parametr `watchID`.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-* **watchID**: Identyfikator zwrócony przez `navigator.accelerometer.watchAcceleration`.
-
-### Przykład
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## Acceleration
-
-Zawiera `Accelerometer` dane przechwycone w określonym czasie. Wartości przyśpieszenia to efekt grawitacji (9.81 m/s ^ 2), tak, że kiedy urządzenie znajduje się płaska i górę, *x*, *y*, i *z* wartości zwracane powinno być ``, `` i `9.81`.
-
-### Właściwości
-
-* **x**: Wartość przyśpieszenia na osi x. (w m/s^2) *(Liczba)*
-* **y**: Wartość przyśpieszenia na osi y. (w m/s^2) *(Liczba)*
-* **z**: Wartość przyśpieszenia na osi z. (w m/s^2) *(Liczba)*
-* **timestamp**: Znacznik czasu w milisekundach. *(DOMTimeStamp)*
diff --git a/doc/ru/index.md b/doc/ru/index.md
deleted file mode 100644
index baeb7fb..0000000
--- a/doc/ru/index.md
+++ /dev/null
@@ -1,151 +0,0 @@
-<!---
- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-# cordova-plugin-device-motion
-
-Этот плагин обеспечивает доступ к акселерометру устройства. Акселерометр является датчиком движения, который обнаруживает изменение (*дельта*) в движении относительно текущей ориентации устройства, в трех измерениях вдоль осей *x*, *y* и *z* .
-
-## Установка
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## Поддерживаемые платформы
-
-* Amazon Fire ОС
-* Android
-* BlackBerry 10
-* Обозреватель
-* Firefox OS
-* iOS
-* Tizen
-* Windows Phone 7 и 8
-* Windows 8
-
-## Методы
-
-* navigator.accelerometer.getCurrentAcceleration
-* navigator.accelerometer.watchAcceleration
-* navigator.accelerometer.clearWatch
-
-## Объекты
-
-* Acceleration
-
-## navigator.accelerometer.getCurrentAcceleration
-
-Возвращает текущее ускорение вдоль осей *x*, *y* и *z*.
-
-Значения ускорения передаются функции обратного вызова `accelerometerSuccess`.
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### Пример
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### Браузер причуды
-
-Значения X, Y, Z движения являются все случайным в целях моделирования акселерометра.
-
-### Особенности iOS
-
-* iOS не поддерживает автоматическое обновление значений для ускорения.
-
-* Вы должны самостоятельно отслеживать изменение ускорения и считывать данные через определенные интервалы времени.
-
-* Таким образом функция `getCurrentAcceleration` возвращает последнее значение, полученное при вызове `watchAccelerometer`.
-
-## navigator.accelerometer.watchAcceleration
-
-Извлекает текущая устройство `Acceleration` с постоянным интервалом, выполнение `accelerometerSuccess` функция обратного вызова каждый раз. Задайте интервал в миллисекундах, через `acceleratorOptions` объекта `frequency` параметр.
-
-Возвращаемый смотреть ссылки ID акселерометр часы интервал и может быть использован с `navigator.accelerometer.clearWatch` чтобы остановить просмотр акселерометр.
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
-* **accelerometerOptions**: Объект с следующие необязательные свойствами:
- * **период**: запрошенный период звонков на accelerometerSuccess с ускорение данных в миллисекундах. *(Число)* (По умолчанию: 10000)
-
-### Пример
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### Особенности iOS
-
-API вызывает функцию обратного вызова с указанным интервалом, но имеет ограничение по частоте запросов к устройству от 40 мс и до 1000 мс. Например если вы запрашиваете интервал 3 секунды, (3000 мс), API запрашивает данные от устройства каждую секунду, но функция обратного вызова будет срабатывать только каждые 3 секунды.
-
-## navigator.accelerometer.clearWatch
-
-Останавливает отслеживание изменений объекта `Acceleration`, на который ссылается параметр `watchID`.
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-* **watchID**: идентификатор, возвращенный`navigator.accelerometer.watchAcceleration`.
-
-### Пример
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## Acceleration
-
-Содержит данные полученные от акселерометра на определенный момент времени. Ускорение значения включают эффект гравитации (9,81 м/с ^ 2), так что когда устройство лежит плоская и вверх, *x*, *y*, и *z* значения, возвращаемые должны быть `` , `` , и`9.81`.
-
-### Параметры
-
-* **x**: величина ускорение по оси x. (в м/с ^ 2) *(Число)*
-* **y**: величина ускорение по оси y. (в м/с ^ 2) *(Число)*
-* **z**: величина ускорение по оси z. (в м/с ^ 2) *(Число)*
-* **timestamp**: временая метка в миллисекундах. *(DOMTimeStamp)*
diff --git a/doc/zh/README.md b/doc/zh/README.md
deleted file mode 100644
index 766e4de..0000000
--- a/doc/zh/README.md
+++ /dev/null
@@ -1,163 +0,0 @@
-<!---
-# license: Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
--->
-
-# cordova-plugin-device-motion
-
-[![Build Status](https://travis-ci.org/apache/cordova-plugin-device-motion.svg)](https://travis-ci.org/apache/cordova-plugin-device-motion)
-
-這個外掛程式提供了對設備的加速度計的訪問。 加速度計是動作感應器檢測到的更改 (*三角洲*) 在相對於當前的設備方向,在三個維度沿*x*、 *y*和*z*軸運動。
-
-訪問是通過一個全球 `navigator.accelerometer` 物件。
-
-雖然該物件附加到全球範圍內 `導航器`,它不可用直到 `deviceready` 事件之後。
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## 安裝
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## 支援的平臺
-
- * 亞馬遜火 OS
- * Android 系統
- * 黑莓 10
- * 瀏覽器
- * 火狐瀏覽器作業系統
- * iOS
- * Tizen
- * Windows Phone 8
- * Windows
-
-## 方法
-
- * navigator.accelerometer.getCurrentAcceleration
- * navigator.accelerometer.watchAcceleration
- * navigator.accelerometer.clearWatch
-
-## 物件
-
- * 加速度
-
-## navigator.accelerometer.getCurrentAcceleration
-
-得到當前加速度沿 *x*、 *y* 和 *z* 軸。
-
-這些加速度值將返回到 `accelerometerSuccess` 回呼函數。
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### 示例
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### 瀏覽器的怪癖
-
-值 X、 Y、 Z 議案是所有中隨機生成的訂單來類比加速度感應器。
-
-### iOS 的怪癖
-
- * iOS 不會認識到在任何給定的點獲取當前加速度的概念。
-
- * 你必須看加速和捕獲的資料在特定的時間間隔。
-
- * 因此, `getCurrentAcceleration` 收益率從報告的最後一個值的函數 `watchAccelerometer` 調用。
-
-## navigator.accelerometer.watchAcceleration
-
-在週期性時間間隔,執行 `accelerometerSuccess` 回呼函數每次檢索設備的當前 `Accelerometer`。 指定的間隔,以毫秒為單位通過 `acceleratorOptions` 物件的 `frequency` 參數。
-
-返回的表 ID 引用加速度計的手錶時間間隔,並且可以與 `navigator.accelerometer.clearWatch` 用來停止觀看了加速度計。
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
- * **accelerometerOptions**: 具有以下可選的鍵的物件:
- * **期間**: 請求的期間的調用的 accelerometerSuccess 與加速度資料以毫秒為單位。*(人數)*(預設值: 10000)
-
-### 示例
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS 的怪癖
-
-API 呼叫成功的回呼函數在時間間隔的要求,但將請求的範圍限制為 40ms年之間裝置和 1000ms。 例如,如果您請求的時間間隔為 3 秒,(3000ms),API 請求資料從設備每隔 1 秒,但只是執行成功回檔每 3 秒。
-
-## navigator.accelerometer.clearWatch
-
-別看 `watchID` 參數所引用的 `Accelerometer`。
-
- navigator.accelerometer.clearWatch(watchID);
-
-
- * **watchID**: 由返回的 ID`navigator.accelerometer.watchAcceleration`.
-
-### 示例
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## 加速度
-
-包含在時間中捕獲的特定點的 `Accekerometer` 資料。 加速度值包括重力的作用 (9.81 m/s ^2),這樣當設備在於扁和朝上,*x*,*y*,*z* 返回的值應該是 ``、 `` 度和 `9.81`.
-
-### 屬性
-
- * **x**: 在 X 軸上的加速度量。(在 m/s ^2)*(人數)*
- * **y**: 在 y 軸上的加速度量。(在 m/s ^2)*(人數)*
- * **z**: 在 Z 軸上的加速度量。(在 m/s ^2)*(人數)*
- * **timestamp**: 創建時間戳記以毫秒為單位。*() DOMTimeStamp*
\ No newline at end of file
diff --git a/doc/zh/index.md b/doc/zh/index.md
deleted file mode 100644
index f9ad0d5..0000000
--- a/doc/zh/index.md
+++ /dev/null
@@ -1,161 +0,0 @@
-<!---
- Licensed to the Apache Software Foundation (ASF) under one
- or more contributor license agreements. See the NOTICE file
- distributed with this work for additional information
- regarding copyright ownership. The ASF licenses this file
- to you under the Apache License, Version 2.0 (the
- "License"); you may not use this file except in compliance
- with the License. You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing,
- software distributed under the License is distributed on an
- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- KIND, either express or implied. See the License for the
- specific language governing permissions and limitations
- under the License.
--->
-
-# cordova-plugin-device-motion
-
-這個外掛程式提供了對設備的加速度計的訪問。 加速度計是動作感應器檢測到的更改 (*三角洲*) 在相對於當前的設備方向,在三個維度沿*x*、 *y*和*z*軸運動。
-
-訪問是通過一個全球 `navigator.accelerometer` 物件。
-
-雖然該物件附加到全球範圍內 `導航器`,它不可用直到 `deviceready` 事件之後。
-
- document.addEventListener("deviceready", onDeviceReady, false);
- function onDeviceReady() {
- console.log(navigator.accelerometer);
- }
-
-
-## 安裝
-
- cordova plugin add cordova-plugin-device-motion
-
-
-## 支援的平臺
-
-* 亞馬遜火 OS
-* Android 系統
-* 黑莓 10
-* 瀏覽器
-* 火狐瀏覽器的作業系統
-* iOS
-* 泰
-* Windows Phone 8
-* Windows
-
-## 方法
-
-* navigator.accelerometer.getCurrentAcceleration
-* navigator.accelerometer.watchAcceleration
-* navigator.accelerometer.clearWatch
-
-## 物件
-
-* 加速度
-
-## navigator.accelerometer.getCurrentAcceleration
-
-得到當前加速度沿 *x*、 *y* 和 *z* 軸。
-
-這些加速度值將返回到 `accelerometerSuccess` 回呼函數。
-
- navigator.accelerometer.getCurrentAcceleration(accelerometerSuccess, accelerometerError);
-
-
-### 示例
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- navigator.accelerometer.getCurrentAcceleration(onSuccess, onError);
-
-
-### 瀏覽器的怪癖
-
-值 X、 Y、 Z 議案是所有中隨機生成的訂單來類比加速度感應器。
-
-### iOS 的怪癖
-
-* iOS 不會認識到在任何給定的點獲取當前加速度的概念。
-
-* 你必須看加速和捕獲的資料在特定的時間間隔。
-
-* 因此, `getCurrentAcceleration` 收益率從報告的最後一個值的函數 `watchAccelerometer` 調用。
-
-## navigator.accelerometer.watchAcceleration
-
-在週期性時間間隔,執行 `accelerometerSuccess` 回呼函數每次檢索設備的當前 `Accelerometer`。 指定的間隔,以毫秒為單位通過 `acceleratorOptions` 物件的 `frequency` 參數。
-
-返回的表 ID 引用加速度計的手錶時間間隔,並且可以與 `navigator.accelerometer.clearWatch` 用來停止觀看了加速度計。
-
- var watchID = navigator.accelerometer.watchAcceleration(accelerometerSuccess,
- accelerometerError,
- accelerometerOptions);
-
-
-* **accelerometerOptions**: 具有以下可選的鍵的物件:
- * **期間**: 請求的期間的調用的 accelerometerSuccess 與加速度資料以毫秒為單位。*(人數)*(預設值: 10000)
-
-### 示例
-
- function onSuccess(acceleration) {
- alert('Acceleration X: ' + acceleration.x + '\n' +
- 'Acceleration Y: ' + acceleration.y + '\n' +
- 'Acceleration Z: ' + acceleration.z + '\n' +
- 'Timestamp: ' + acceleration.timestamp + '\n');
- };
-
- function onError() {
- alert('onError!');
- };
-
- var options = { frequency: 3000 }; // Update every 3 seconds
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
-
-### iOS 的怪癖
-
-API 呼叫成功的回呼函數在時間間隔的要求,但將請求的範圍限制為 40ms年之間裝置和 1000ms。 例如,如果您請求的時間間隔為 3 秒,(3000ms),API 請求資料從設備每隔 1 秒,但只是執行成功回檔每 3 秒。
-
-## navigator.accelerometer.clearWatch
-
-別看 `watchID` 參數所引用的 `Accelerometer`。
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-* **watchID**: 由返回的 ID`navigator.accelerometer.watchAcceleration`.
-
-### 示例
-
- var watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
-
- // ... later on ...
-
- navigator.accelerometer.clearWatch(watchID);
-
-
-## 加速度
-
-包含在時間中捕獲的特定點的 `Accekerometer` 資料。 加速度值包括重力的作用 (9.81 m/s ^2),這樣當設備在於扁和朝上,*x*,*y*,*z* 返回的值應該是 ``、 `` 度和 `9.81`.
-
-### 屬性
-
-* **x**: 在 X 軸上的加速度量。(在 m/s ^2)*(人數)*
-* **y**: 在 y 軸上的加速度量。(在 m/s ^2)*(人數)*
-* **z**: 在 Z 軸上的加速度量。(在 m/s ^2)*(人數)*
-* **timestamp**: 創建時間戳記以毫秒為單位。*() DOMTimeStamp*