| # Makefile.in generated by automake 1.14.1 from Makefile.am. |
| # Makefile. Generated from Makefile.in by configure. |
| |
| # Copyright (C) 1994-2013 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| |
| |
| |
| am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/uncrustify |
| pkgincludedir = $(includedir)/uncrustify |
| pkglibdir = $(libdir)/uncrustify |
| pkglibexecdir = $(libexecdir)/uncrustify |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| subdir = . |
| DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
| $(top_srcdir)/configure $(am__configure_deps) test-driver \ |
| AUTHORS COPYING ChangeLog INSTALL NEWS README compile \ |
| config.guess config.sub install-sh missing |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/src/config.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_P = $(am__v_P_$(V)) |
| am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_$(V)) |
| am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_$(V)) |
| am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| depcomp = |
| am__depfiles_maybe = |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
| ctags-recursive dvi-recursive html-recursive info-recursive \ |
| install-data-recursive install-dvi-recursive \ |
| install-exec-recursive install-html-recursive \ |
| install-info-recursive install-pdf-recursive \ |
| install-ps-recursive install-recursive installcheck-recursive \ |
| installdirs-recursive pdf-recursive ps-recursive \ |
| tags-recursive uninstall-recursive |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(pkgdatadir)" |
| DATA = $(pkgdata_DATA) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| am__recursive_targets = \ |
| $(RECURSIVE_TARGETS) \ |
| $(RECURSIVE_CLEAN_TARGETS) \ |
| $(am__extra_recursive_targets) |
| AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ |
| cscope check recheck distdir dist dist-all distcheck |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| ETAGS = etags |
| CTAGS = ctags |
| CSCOPE = cscope |
| am__tty_colors_dummy = \ |
| mgn= red= grn= lgn= blu= brg= std=; \ |
| am__color_tests=no |
| am__tty_colors = { \ |
| $(am__tty_colors_dummy); \ |
| if test "X$(AM_COLOR_TESTS)" = Xno; then \ |
| am__color_tests=no; \ |
| elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ |
| am__color_tests=yes; \ |
| elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ |
| am__color_tests=yes; \ |
| fi; \ |
| if test $$am__color_tests = yes; then \ |
| red='[0;31m'; \ |
| grn='[0;32m'; \ |
| lgn='[1;32m'; \ |
| blu='[1;34m'; \ |
| mgn='[0;35m'; \ |
| brg='[1m'; \ |
| std='[m'; \ |
| fi; \ |
| } |
| am__recheck_rx = ^[ ]*:recheck:[ ]* |
| am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* |
| am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* |
| # A command that, given a newline-separated list of test names on the |
| # standard input, print the name of the tests that are to be re-run |
| # upon "make recheck". |
| am__list_recheck_tests = $(AWK) '{ \ |
| recheck = 1; \ |
| while ((rc = (getline line < ($$0 ".trs"))) != 0) \ |
| { \ |
| if (rc < 0) \ |
| { \ |
| if ((getline line2 < ($$0 ".log")) < 0) \ |
| recheck = 0; \ |
| break; \ |
| } \ |
| else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ |
| { \ |
| recheck = 0; \ |
| break; \ |
| } \ |
| else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ |
| { \ |
| break; \ |
| } \ |
| }; \ |
| if (recheck) \ |
| print $$0; \ |
| close ($$0 ".trs"); \ |
| close ($$0 ".log"); \ |
| }' |
| # A command that, given a newline-separated list of test names on the |
| # standard input, create the global log from their .trs and .log files. |
| am__create_global_log = $(AWK) ' \ |
| function fatal(msg) \ |
| { \ |
| print "fatal: making $@: " msg | "cat >&2"; \ |
| exit 1; \ |
| } \ |
| function rst_section(header) \ |
| { \ |
| print header; \ |
| len = length(header); \ |
| for (i = 1; i <= len; i = i + 1) \ |
| printf "="; \ |
| printf "\n\n"; \ |
| } \ |
| { \ |
| copy_in_global_log = 1; \ |
| global_test_result = "RUN"; \ |
| while ((rc = (getline line < ($$0 ".trs"))) != 0) \ |
| { \ |
| if (rc < 0) \ |
| fatal("failed to read from " $$0 ".trs"); \ |
| if (line ~ /$(am__global_test_result_rx)/) \ |
| { \ |
| sub("$(am__global_test_result_rx)", "", line); \ |
| sub("[ ]*$$", "", line); \ |
| global_test_result = line; \ |
| } \ |
| else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ |
| copy_in_global_log = 0; \ |
| }; \ |
| if (copy_in_global_log) \ |
| { \ |
| rst_section(global_test_result ": " $$0); \ |
| while ((rc = (getline line < ($$0 ".log"))) != 0) \ |
| { \ |
| if (rc < 0) \ |
| fatal("failed to read from " $$0 ".log"); \ |
| print line; \ |
| }; \ |
| printf "\n"; \ |
| }; \ |
| close ($$0 ".trs"); \ |
| close ($$0 ".log"); \ |
| }' |
| # Restructured Text title. |
| am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } |
| # Solaris 10 'make', and several other traditional 'make' implementations, |
| # pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it |
| # by disabling -e (using the XSI extension "set +e") if it's set. |
| am__sh_e_setup = case $$- in *e*) set +e;; esac |
| # Default flags passed to test drivers. |
| am__common_driver_flags = \ |
| --color-tests "$$am__color_tests" \ |
| --enable-hard-errors "$$am__enable_hard_errors" \ |
| --expect-failure "$$am__expect_failure" |
| # To be inserted before the command running the test. Creates the |
| # directory for the log if needed. Stores in $dir the directory |
| # containing $f, in $tst the test, in $log the log. Executes the |
| # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and |
| # passes TESTS_ENVIRONMENT. Set up options for the wrapper that |
| # will run the test scripts (or their associated LOG_COMPILER, if |
| # thy have one). |
| am__check_pre = \ |
| $(am__sh_e_setup); \ |
| $(am__vpath_adj_setup) $(am__vpath_adj) \ |
| $(am__tty_colors); \ |
| srcdir=$(srcdir); export srcdir; \ |
| case "$@" in \ |
| */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ |
| *) am__odir=.;; \ |
| esac; \ |
| test "x$$am__odir" = x"." || test -d "$$am__odir" \ |
| || $(MKDIR_P) "$$am__odir" || exit $$?; \ |
| if test -f "./$$f"; then dir=./; \ |
| elif test -f "$$f"; then dir=; \ |
| else dir="$(srcdir)/"; fi; \ |
| tst=$$dir$$f; log='$@'; \ |
| if test -n '$(DISABLE_HARD_ERRORS)'; then \ |
| am__enable_hard_errors=no; \ |
| else \ |
| am__enable_hard_errors=yes; \ |
| fi; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ |
| am__expect_failure=yes;; \ |
| *) \ |
| am__expect_failure=no;; \ |
| esac; \ |
| $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) |
| # A shell command to get the names of the tests scripts with any registered |
| # extension removed (i.e., equivalently, the names of the test logs, with |
| # the '.log' extension removed). The result is saved in the shell variable |
| # '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, |
| # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", |
| # since that might cause problem with VPATH rewrites for suffix-less tests. |
| # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. |
| am__set_TESTS_bases = \ |
| bases='$(TEST_LOGS)'; \ |
| bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ |
| bases=`echo $$bases` |
| RECHECK_LOGS = $(TEST_LOGS) |
| TEST_SUITE_LOG = test-suite.log |
| TEST_EXTENSIONS = .test |
| LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver |
| LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) |
| am__set_b = \ |
| case '$@' in \ |
| */*) \ |
| case '$*' in \ |
| */*) b='$*';; \ |
| *) b=`echo '$@' | sed 's/\.log$$//'`; \ |
| esac;; \ |
| *) \ |
| b='$*';; \ |
| esac |
| am__test_logs1 = $(TESTS:=.log) |
| am__test_logs2 = $(am__test_logs1:.log=.log) |
| TEST_LOGS = $(am__test_logs2:.test.log=.log) |
| TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver |
| TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ |
| $(TEST_LOG_FLAGS) |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| if test -d "$(distdir)"; then \ |
| find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -rf "$(distdir)" \ |
| || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| else :; fi |
| am__post_remove_distdir = $(am__remove_distdir) |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| DIST_ARCHIVES = $(distdir).tar.gz |
| GZIP_ENV = --best |
| DIST_TARGETS = dist-gzip |
| distuninstallcheck_listfiles = find . -type f -print |
| am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = ${SHELL} /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify/missing aclocal-1.14 |
| AMTAR = $${TAR-tar} |
| AM_DEFAULT_VERBOSITY = 0 |
| AUTOCONF = ${SHELL} /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify/missing autoconf |
| AUTOHEADER = ${SHELL} /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify/missing autoheader |
| AUTOMAKE = ${SHELL} /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify/missing automake-1.14 |
| AWK = awk |
| CC = gcc |
| CCDEPMODE = depmode=none |
| CFLAGS = -g -O2 |
| CPP = gcc -E |
| CPPFLAGS = |
| CXX = g++ |
| CXXDEPMODE = depmode=none |
| CXXFLAGS = -g -O2 |
| CYGPATH_W = echo |
| DEFS = -DHAVE_CONFIG_H |
| DEPDIR = .deps |
| ECHO_C = \c |
| ECHO_N = |
| ECHO_T = |
| EGREP = /usr/bin/grep -E |
| EXEEXT = |
| GREP = /usr/bin/grep |
| INSTALL = /usr/bin/install -c |
| INSTALL_DATA = ${INSTALL} -m 644 |
| INSTALL_PROGRAM = ${INSTALL} |
| INSTALL_SCRIPT = ${INSTALL} |
| INSTALL_STRIP_PROGRAM = $(install_sh) -c -s |
| LDFLAGS = |
| LIBOBJS = |
| LIBS = |
| LTLIBOBJS = |
| MAINT = # |
| MAKEINFO = ${SHELL} /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify/missing makeinfo |
| MKDIR_P = ./install-sh -c -d |
| OBJEXT = o |
| PACKAGE = uncrustify |
| PACKAGE_BUGREPORT = |
| PACKAGE_NAME = uncrustify |
| PACKAGE_STRING = uncrustify 0.61 |
| PACKAGE_TARNAME = uncrustify |
| PACKAGE_URL = http://uncrustify.sourceforge.net/ |
| PACKAGE_VERSION = 0.61 |
| PATH_SEPARATOR = : |
| SET_MAKE = |
| SHELL = /bin/sh |
| STRIP = |
| VERSION = 0.61 |
| abs_builddir = /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify |
| abs_srcdir = /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify |
| abs_top_builddir = /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify |
| abs_top_srcdir = /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify |
| ac_ct_CC = gcc |
| ac_ct_CXX = g++ |
| am__include = include |
| am__leading_dot = . |
| am__quote = |
| am__tar = $${TAR-tar} chof - "$$tardir" |
| am__untar = $${TAR-tar} xf - |
| bindir = ${exec_prefix}/bin |
| build_alias = |
| builddir = . |
| datadir = ${datarootdir} |
| datarootdir = ${prefix}/share |
| docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} |
| dvidir = ${docdir} |
| exec_prefix = ${prefix} |
| host_alias = |
| htmldir = ${docdir} |
| includedir = ${prefix}/include |
| infodir = ${datarootdir}/info |
| install_sh = ${SHELL} /Users/tripod/codez/cordova/cordova-osx/node_modules/uncrustify/install-sh |
| libdir = ${exec_prefix}/lib |
| libexecdir = ${exec_prefix}/libexec |
| localedir = ${datarootdir}/locale |
| localstatedir = ${prefix}/var |
| mandir = ${datarootdir}/man |
| mkdir_p = $(MKDIR_P) |
| oldincludedir = /usr/include |
| pdfdir = ${docdir} |
| prefix = /usr/local |
| program_transform_name = s,x,x, |
| psdir = ${docdir} |
| sbindir = ${exec_prefix}/sbin |
| sharedstatedir = ${prefix}/com |
| srcdir = . |
| sysconfdir = ${prefix}/etc |
| target_alias = |
| top_build_prefix = |
| top_builddir = . |
| top_srcdir = . |
| AUTOMAKE_OPTIONS = foreign no-dependencies 1.11 |
| SUBDIRS = src man |
| pkgdata_DATA = etc/ben.cfg etc/d.cfg etc/defaults.cfg etc/gnu-indent.cfg etc/kr-indent.cfg etc/linux-indent.cfg etc/linux.cfg etc/mono.cfg etc/xsupplicant.cfg |
| |
| # INCLUDES = @INCLUDES@ |
| testdir = tests |
| TESTS = run_tests.sh |
| EXTRA_DIST = scripts run_tests.sh make_token_names.sh $(pkgdata_DATA) \ |
| tests/*.test tests/*.sh tests/*.py tests/config tests/input \ |
| tests/output win32 uncrustify.xcodeproj osx make_win32.sh documentation |
| |
| DISTCLEANFILES = |
| CLEANFILES = *~ *.bak |
| MAINTAINERCLEANFILES = aclocal.m4 Makefile.in |
| all: all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .log .test .test$(EXEEXT) .trs |
| am--refresh: Makefile |
| @: |
| $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: # $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): # $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| install-pkgdataDATA: $(pkgdata_DATA) |
| @$(NORMAL_INSTALL) |
| @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \ |
| done |
| |
| uninstall-pkgdataDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir) |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run 'make' without going through this Makefile. |
| # To change the values of 'make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in 'config.status', edit 'config.status' |
| # (which will cause the Makefiles to be regenerated when you run 'make'); |
| # (2) otherwise, pass the desired values on the 'make' command line. |
| $(am__recursive_targets): |
| @fail=; \ |
| if $(am__make_keepgoing); then \ |
| failcom='fail=yes'; \ |
| else \ |
| failcom='exit 1'; \ |
| fi; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-recursive |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-recursive |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscope: cscope.files |
| test ! -s cscope.files \ |
| || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) |
| clean-cscope: |
| -rm -f cscope.files |
| cscope.files: clean-cscope cscopelist |
| cscopelist: cscopelist-recursive |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
| |
| # Recover from deleted '.trs' file; this should ensure that |
| # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create |
| # both 'foo.log' and 'foo.trs'. Break the recipe in two subshells |
| # to avoid problems with "make -n". |
| .log.trs: |
| rm -f $< $@ |
| $(MAKE) $(AM_MAKEFLAGS) $< |
| |
| # Leading 'am--fnord' is there to ensure the list of targets does not |
| # expand to empty, as could happen e.g. with make check TESTS=''. |
| am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) |
| am--force-recheck: |
| @: |
| |
| $(TEST_SUITE_LOG): $(TEST_LOGS) |
| @$(am__set_TESTS_bases); \ |
| am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ |
| redo_bases=`for i in $$bases; do \ |
| am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ |
| done`; \ |
| if test -n "$$redo_bases"; then \ |
| redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ |
| redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ |
| if $(am__make_dryrun); then :; else \ |
| rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ |
| fi; \ |
| fi; \ |
| if test -n "$$am__remaking_logs"; then \ |
| echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ |
| "recursion detected" >&2; \ |
| else \ |
| am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ |
| fi; \ |
| if $(am__make_dryrun); then :; else \ |
| st=0; \ |
| errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ |
| for i in $$redo_bases; do \ |
| test -f $$i.trs && test -r $$i.trs \ |
| || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ |
| test -f $$i.log && test -r $$i.log \ |
| || { echo "$$errmsg $$i.log" >&2; st=1; }; \ |
| done; \ |
| test $$st -eq 0 || exit 1; \ |
| fi |
| @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ |
| ws='[ ]'; \ |
| results=`for b in $$bases; do echo $$b.trs; done`; \ |
| test -n "$$results" || results=/dev/null; \ |
| all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ |
| pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ |
| fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ |
| skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ |
| xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ |
| xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ |
| error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ |
| if test `expr $$fail + $$xpass + $$error` -eq 0; then \ |
| success=true; \ |
| else \ |
| success=false; \ |
| fi; \ |
| br='==================='; br=$$br$$br$$br$$br; \ |
| result_count () \ |
| { \ |
| if test x"$$1" = x"--maybe-color"; then \ |
| maybe_colorize=yes; \ |
| elif test x"$$1" = x"--no-color"; then \ |
| maybe_colorize=no; \ |
| else \ |
| echo "$@: invalid 'result_count' usage" >&2; exit 4; \ |
| fi; \ |
| shift; \ |
| desc=$$1 count=$$2; \ |
| if test $$maybe_colorize = yes && test $$count -gt 0; then \ |
| color_start=$$3 color_end=$$std; \ |
| else \ |
| color_start= color_end=; \ |
| fi; \ |
| echo "$${color_start}# $$desc $$count$${color_end}"; \ |
| }; \ |
| create_testsuite_report () \ |
| { \ |
| result_count $$1 "TOTAL:" $$all "$$brg"; \ |
| result_count $$1 "PASS: " $$pass "$$grn"; \ |
| result_count $$1 "SKIP: " $$skip "$$blu"; \ |
| result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ |
| result_count $$1 "FAIL: " $$fail "$$red"; \ |
| result_count $$1 "XPASS:" $$xpass "$$red"; \ |
| result_count $$1 "ERROR:" $$error "$$mgn"; \ |
| }; \ |
| { \ |
| echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ |
| $(am__rst_title); \ |
| create_testsuite_report --no-color; \ |
| echo; \ |
| echo ".. contents:: :depth: 2"; \ |
| echo; \ |
| for b in $$bases; do echo $$b; done \ |
| | $(am__create_global_log); \ |
| } >$(TEST_SUITE_LOG).tmp || exit 1; \ |
| mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ |
| if $$success; then \ |
| col="$$grn"; \ |
| else \ |
| col="$$red"; \ |
| test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ |
| fi; \ |
| echo "$${col}$$br$${std}"; \ |
| echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ |
| echo "$${col}$$br$${std}"; \ |
| create_testsuite_report --maybe-color; \ |
| echo "$$col$$br$$std"; \ |
| if $$success; then :; else \ |
| echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ |
| if test -n "$(PACKAGE_BUGREPORT)"; then \ |
| echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ |
| fi; \ |
| echo "$$col$$br$$std"; \ |
| fi; \ |
| $$success || exit 1 |
| |
| check-TESTS: |
| @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list |
| @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list |
| @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) |
| @set +e; $(am__set_TESTS_bases); \ |
| log_list=`for i in $$bases; do echo $$i.log; done`; \ |
| trs_list=`for i in $$bases; do echo $$i.trs; done`; \ |
| log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ |
| $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ |
| exit $$?; |
| recheck: all |
| @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) |
| @set +e; $(am__set_TESTS_bases); \ |
| bases=`for i in $$bases; do echo $$i; done \ |
| | $(am__list_recheck_tests)` || exit 1; \ |
| log_list=`for i in $$bases; do echo $$i.log; done`; \ |
| log_list=`echo $$log_list`; \ |
| $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ |
| am__force_recheck=am--force-recheck \ |
| TEST_LOGS="$$log_list"; \ |
| exit $$? |
| run_tests.sh.log: run_tests.sh |
| @p='run_tests.sh'; \ |
| b='run_tests.sh'; \ |
| $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ |
| --log-file $$b.log --trs-file $$b.trs \ |
| $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ |
| "$$tst" $(AM_TESTS_FD_REDIRECT) |
| .test.log: |
| @p='$<'; \ |
| $(am__set_b); \ |
| $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ |
| --log-file $$b.log --trs-file $$b.trs \ |
| $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ |
| "$$tst" $(AM_TESTS_FD_REDIRECT) |
| #.test$(EXEEXT).log: |
| # @p='$<'; \ |
| # $(am__set_b); \ |
| # $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ |
| # --log-file $$b.log --trs-file $$b.trs \ |
| # $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ |
| # "$$tst" $(AM_TESTS_FD_REDIRECT) |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| $(am__make_dryrun) \ |
| || test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__post_remove_distdir) |
| |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__post_remove_distdir) |
| |
| dist-lzip: distdir |
| tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| $(am__post_remove_distdir) |
| |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| $(am__post_remove_distdir) |
| |
| dist-tarZ: distdir |
| @echo WARNING: "Support for shar distribution archives is" \ |
| "deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__post_remove_distdir) |
| |
| dist-shar: distdir |
| @echo WARNING: "Support for distribution archives compressed with" \ |
| "legacy program 'compress' is deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__post_remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__post_remove_distdir) |
| |
| dist dist-all: |
| $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| $(am__post_remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lz*) \ |
| lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir) |
| chmod u+w $(distdir) |
| mkdir $(distdir)/_build $(distdir)/_inst |
| chmod a-w $(distdir) |
| test -d $(distdir)/_build || exit 0; \ |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build \ |
| && ../configure \ |
| $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| --srcdir=.. --prefix="$$dc_install_base" \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__post_remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @test -n '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: trying to run $@ with an empty' \ |
| '$$(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| $(MAKE) $(AM_MAKEFLAGS) check-TESTS check-local |
| check: check-recursive |
| all-am: Makefile $(DATA) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(pkgdatadir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) |
| -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) |
| -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) |
| clean: clean-recursive |
| |
| clean-am: clean-generic mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-pkgdataDATA |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-pkgdataDATA |
| |
| .MAKE: $(am__recursive_targets) check-am install-am install-strip |
| |
| .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ |
| am--refresh check check-TESTS check-am check-local clean \ |
| clean-cscope clean-generic cscope cscopelist-am ctags ctags-am \ |
| dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \ |
| dist-tarZ dist-xz dist-zip distcheck distclean \ |
| distclean-generic distclean-tags distcleancheck distdir \ |
| distuninstallcheck dvi dvi-am html html-am info info-am \ |
| install install-am install-data install-data-am install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-info install-info-am install-man \ |
| install-pdf install-pdf-am install-pkgdataDATA install-ps \ |
| install-ps-am install-strip installcheck installcheck-am \ |
| installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ |
| pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \ |
| uninstall-pkgdataDATA |
| |
| |
| check-local: |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |