| <!-- | |
| ~ Licensed to the Apache Software Foundation (ASF) under one | |
| ~ or more contributor license agreements. See the NOTICE file | |
| ~ distributed with this work for additional information | |
| ~ regarding copyright ownership. The ASF licenses this file | |
| ~ to you under the Apache License, Version 2.0 (the | |
| ~ "License"); you may not use this file except in compliance | |
| ~ with the License. You may obtain a copy of the License at | |
| ~ | |
| ~ http://www.apache.org/licenses/LICENSE-2.0 | |
| ~ | |
| ~ Unless required by applicable law or agreed to in writing, | |
| ~ software distributed under the License is distributed on an | |
| ~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY | |
| ~ KIND, either express or implied. See the License for the | |
| ~ specific language governing permissions and limitations | |
| ~ under the License. | |
| --> | |
| <axisconfig name="AxisJava2.0"> | |
| <!-- ================================================= --> | |
| <!-- Parameters --> | |
| <!-- ================================================= --> | |
| <parameter name="hotdeployment">true</parameter> | |
| <parameter name="hotupdate">false</parameter> | |
| <parameter name="enableMTOM">false</parameter> | |
| <parameter name="enableSwA">false</parameter> | |
| <!--Uncomment if you want to enable file caching for attachments --> | |
| <!--parameter name="cacheAttachments">true</parameter> | |
| <parameter name="attachmentDIR"></parameter> | |
| <parameter name="sizeThreshold">4000</parameter--> | |
| <!--Uncomment if you want to plugin your own attachments lifecycle implementation --> | |
| <!--<attachmentsLifecycleManager class="org.apache.axiom.attachments.lifecycle.impl.LifecycleManagerImpl"/>--> | |
| <!--Uncomment if you want to enable the reduction of the in-memory cache of WSDL definitions --> | |
| <!--In some server environments, the available memory heap is limited and can fill up under load --> | |
| <!--Since in-memory copies of WSDL definitions can be large, some steps can be taken--> | |
| <!--to reduce the memory needed for the cached WSDL definitions. --> | |
| <!--parameter name="reduceWSDLMemoryCache">true</parameter--> | |
| <!--This will give out the timout of the configuration contexts, in milliseconds--> | |
| <parameter name="ConfigContextTimeoutInterval">30000</parameter> | |
| <!--During a fault, stack trace can be sent with the fault message. The following flag will control --> | |
| <!--that behavior.--> | |
| <parameter name="sendStacktraceDetailsWithFaults">false</parameter> | |
| <!--If there aren't any information available to find out the fault reason, we set the message of the exception--> | |
| <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be --> | |
| <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag--> | |
| <!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.--> | |
| <parameter name="DrillDownToRootCauseForFaultReason">false</parameter> | |
| <parameter name="userName">admin</parameter> | |
| <parameter name="password">axis2</parameter> | |
| <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.--> | |
| <!--ServicesDirectory only works on the following cases--> | |
| <!---File based configurator and in that case the value should be a file URL (http:// not allowed)--> | |
| <!---When creating URL Based configurator with URL file:// --> | |
| <!--- War based configurator with expanded case , --> | |
| <!--All the other scenarios it will be ignored.--> | |
| <!--<parameter name="ServicesDirectory">service</parameter>--> | |
| <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path--> | |
| <!--<parameter name="ModulesDirectory">modules</parameter>--> | |
| <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context--> | |
| <!--root which can configured using the following contextRoot parameter--> | |
| <!--<parameter name="contextRoot">axis2</parameter>--> | |
| <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints--> | |
| <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this --> | |
| <!--context path to proper Axis2 servlets--> | |
| <!--<parameter name="servicePath">services</parameter>--> | |
| <!--<parameter name="restPath">rest</parameter>--> | |
| <!-- Following parameter will completely disable REST handling in Axis2--> | |
| <parameter name="disableREST" locked="false">false</parameter> | |
| <!-- Following parameter will suppress generation of SOAP 1.2 bindings in auto-generated WSDL files --> | |
| <parameter name="disableSOAP12" locked="true">false</parameter> | |
| <!--POJO deployer , this will alow users to drop .class file and make that into a service--> | |
| <deployer extension=".class" directory="pojo" class="org.apache.axis2.deployment.POJODeployer"/> | |
| <deployer extension=".jar" directory="servicejars" | |
| class="org.apache.axis2.jaxws.framework.JAXWSDeployer"/> | |
| <deployer extension=".jar" directory="transports" | |
| class="org.apache.axis2.deployment.TransportDeployer"/> | |
| <!--CORBA deployer , this will alow users to invoke remote CORBA services through Axis2--> | |
| <!--<deployer extension=".xml" directory="corba" class="org.apache.axis2.corba.deployer.CorbaDeployer"/>--> | |
| <!--<deployer extension=".jsa" directory="rmiservices" class="org.apache.axis2.rmi.deploy.RMIServiceDeployer"/>--> | |
| <!-- Following parameter will set the host name for the epr--> | |
| <!--<parameter name="hostname" locked="true">myhost.com</parameter>--> | |
| <!-- If you have a front end host which exposes this webservice using a different public URL --> | |
| <!-- use this parameter to override autodetected url --> | |
| <!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>--> | |
| <!-- The way of adding listener to the system--> | |
| <!-- <listener class="org.apache.axis2.ObserverIMPL">--> | |
| <!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>--> | |
| <!-- </listener>--> | |
| <threadContextMigrators> | |
| <threadContextMigrator listId="JAXWS-ThreadContextMigrator-List" | |
| class="org.apache.axis2.jaxws.addressing.migrator.EndpointContextMapMigrator"/> | |
| </threadContextMigrators> | |
| <!-- ================================================= --> | |
| <!-- Message Receivers --> | |
| <!-- ================================================= --> | |
| <!--This is the default MessageReceiver for the system , if you want to have MessageReceivers for --> | |
| <!--all the other MEP implement it and add the correct entry to here , so that you can refer from--> | |
| <!--any operation --> | |
| <!--Note : You can override this for a particular service by adding the same element with your requirement--> | |
| <messageReceivers> | |
| <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only" | |
| class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> | |
| <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out" | |
| class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> | |
| <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only" | |
| class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> | |
| <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out" | |
| class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> | |
| <messageReceiver mep="http://www.w3.org/ns/wsdl/in-only" | |
| class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> | |
| <messageReceiver mep="http://www.w3.org/ns/wsdl/in-out" | |
| class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> | |
| </messageReceivers> | |
| <!-- ================================================= --> | |
| <!-- Message Formatter --> | |
| <!-- ================================================= --> | |
| <!--Following content type to message formatter mapping can be used to implement support for different message --> | |
| <!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. --> | |
| <messageFormatters> | |
| <messageFormatter contentType="application/x-www-form-urlencoded" | |
| class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/> | |
| <messageFormatter contentType="multipart/form-data" | |
| class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/> | |
| <messageFormatter contentType="application/xml" | |
| class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/> | |
| <messageFormatter contentType="text/xml" | |
| class="org.apache.axis2.transport.http.SOAPMessageFormatter"/> | |
| <messageFormatter contentType="application/soap+xml" | |
| class="org.apache.axis2.transport.http.SOAPMessageFormatter"/> | |
| </messageFormatters> | |
| <!-- ================================================= --> | |
| <!-- Message Builders --> | |
| <!-- ================================================= --> | |
| <!--Following content type to builder mapping can be used to implement support for different message --> | |
| <!--formats in Axis2. These message formats are expected to be resolved based on the content type. --> | |
| <messageBuilders> | |
| <messageBuilder contentType="application/xml" | |
| class="org.apache.axis2.builder.ApplicationXMLBuilder"/> | |
| <messageBuilder contentType="application/x-www-form-urlencoded" | |
| class="org.apache.axis2.builder.XFormURLEncodedBuilder"/> | |
| <messageBuilder contentType="multipart/form-data" | |
| class="org.apache.axis2.builder.MultipartFormDataBuilder"/> | |
| </messageBuilders> | |
| <!-- ================================================= --> | |
| <!-- Transport Ins --> | |
| <!-- ================================================= --> | |
| <transportReceiver name="http" | |
| class="org.apache.axis2.transport.http.SimpleHTTPServer"> | |
| <parameter name="port">8080</parameter> | |
| <!-- Here is the complete list of supported parameters (see example settings further below): | |
| port: the port to listen on (default 6060) | |
| hostname: if non-null, url prefix used in reply-to endpoint references (default null) | |
| originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1") | |
| requestTimeout: value in millis of time that requests can wait for data (default 20000) | |
| requestTcpNoDelay: true to maximize performance and minimize latency (default true) | |
| false to minimize bandwidth consumption by combining segments | |
| requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25) | |
| requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150) | |
| note that default queue never fills up: see HttpFactory | |
| threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180) | |
| note that no such threads can exist with default unbounded request queue | |
| threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS) | |
| --> | |
| <!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> --> | |
| <!-- <parameter name="originServer">My-Server/1.1</parameter> --> | |
| <!-- <parameter name="requestTimeout">10000</parameter> --> | |
| <!-- <parameter name="requestTcpNoDelay">false</parameter> --> | |
| <!-- <parameter name="requestCoreThreadPoolSize">50</parameter> --> | |
| <!-- <parameter name="requestMaxThreadPoolSize">100</parameter> --> | |
| <!-- <parameter name="threadKeepAliveTime">240000</parameter> --> | |
| <!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> --> | |
| </transportReceiver> | |
| <!--Uncomment if you want to have TCP transport support--> | |
| <!--transportReceiver name="tcp" | |
| class="org.apache.axis2.transport.tcp.TCPServer"> | |
| <parameter name="port">6060</parameter-->> | |
| <!--If you want to give your own host address for EPR generation--> | |
| <!--uncomment the following paramter , and set it as you required.--> | |
| <!--<parameter name="hostname">tcp://myApp.com/ws</parameter>--> | |
| <!-- /transportReceiver --> | |
| <!-- ================================================= --> | |
| <!-- Transport Outs --> | |
| <!-- ================================================= --> | |
| <!--Uncomment if you want to have TCP transport support--> | |
| <!-- | |
| <transportSender name="tcp" | |
| class="org.apache.axis2.transport.tcp.TCPTransportSender"/> | |
| --> | |
| <transportSender name="local" | |
| class="org.apache.axis2.transport.local.LocalTransportSender"/> | |
| <transportSender name="http" | |
| class="org.apache.axis2.transport.http.CommonsHTTPTransportSender"> | |
| <parameter name="PROTOCOL">HTTP/1.1</parameter> | |
| <parameter name="Transfer-Encoding">chunked</parameter> | |
| <!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages --> | |
| <!-- <parameter name="OmitSOAP12Action">true</parameter> --> | |
| </transportSender> | |
| <transportSender name="https" | |
| class="org.apache.axis2.transport.http.CommonsHTTPTransportSender"> | |
| <parameter name="PROTOCOL">HTTP/1.1</parameter> | |
| <parameter name="Transfer-Encoding">chunked</parameter> | |
| </transportSender> | |
| <!-- Please enable this if you need the java transport --> | |
| <!-- <transportSender name="java" | |
| class="org.apache.axis2.transport.java.JavaTransportSender"/> --> | |
| <!-- ================================================= --> | |
| <!-- Global Modules --> | |
| <!-- ================================================= --> | |
| <!-- Comment this to disable Addressing --> | |
| <!-- <module ref="addressing"/> --> | |
| <!--Configuring module , providing parameters for modules whether they refer or not--> | |
| <!--<moduleConfig name="addressing">--> | |
| <!--<parameter name="addressingPara">N/A</parameter>--> | |
| <!--</moduleConfig>--> | |
| <!-- ================================================= --> | |
| <!-- Clustering --> | |
| <!-- ================================================= --> | |
| <!-- | |
| To enable clustering for this node, set the value of "enable" attribute of the "cluster" | |
| element to "true". The initilization of a node in the cluster is handled by the class | |
| corresponding to the "class" attribute of the "cluster" element. It is also responsible for | |
| getting this node to join the cluster. | |
| --> | |
| <cluster class="org.apache.axis2.clustering.tribes.TribesClusterManager" enable="false"> | |
| <!-- | |
| This parameter indicates whther the cluster has to be automatically initalized | |
| when the AxisConfiguration is built. If set to "true" the initialization will not be | |
| done at that stage, and some other party will have to explictly initialize the cluster. | |
| --> | |
| <parameter name="AvoidInitiation">true</parameter> | |
| <!-- | |
| Indicates whether this member is active or not. This will be useful in a setup where | |
| members are deployed in ACTIVE and/or PASSIVE configuration | |
| --> | |
| <parameter name="isActive">true</parameter> | |
| <!-- | |
| An implementation of org.apache.axis2.clustering.MembershipListener | |
| which will be called on membership changes | |
| --> | |
| <!-- | |
| <parameter name="membershipListener"> | |
| <class>org.apache.axis2.clustering.MembershipListenerImpl</class> | |
| <properties> | |
| <property name="foo">bar</property> | |
| </properties> | |
| </parameter> | |
| --> | |
| <!-- | |
| The membership scheme used in this setup. The only values supported at the moment are | |
| "multicast" and "wka" | |
| 1. multicast - membership is automatically discovered using multicasting | |
| 2. wka - Well-Known Address based multicasting. Membership is discovered with the help | |
| of one or more nodes running at a Well-Known Address. New members joining a | |
| cluster will first connect to a well-known node, register with the well-known node | |
| and get the membership list from it. When new members join, one of the well-known | |
| nodes will notify the others in the group. When a member leaves the cluster or | |
| is deemed to have left the cluster, it will be detected by the Group Membership | |
| Service (GMS) using a TCP ping mechanism. | |
| --> | |
| <parameter name="membershipScheme">multicast</parameter> | |
| <!-- | |
| The clustering domain/group. Nodes in the same group will belong to the same multicast | |
| domain. There will not be interference between nodes in different groups. | |
| --> | |
| <parameter name="domain">apache.axis2.domain</parameter> | |
| <!-- | |
| This parameter is only valid when the "mode" parameter is set to application. This indicates | |
| the domain in which the the applications being load balanced are deployed. | |
| --> | |
| <parameter name="applicationDomain">apache.axis2.application.domain</parameter> | |
| <!-- | |
| When a Web service request is received, and processed, before the response is sent to the | |
| client, should we update the states of all members in the cluster? If the value of | |
| this parameter is set to "true", the response to the client will be sent only after | |
| all the members have been updated. Obviously, this can be time consuming. In some cases, | |
| such this overhead may not be acceptable, in which case the value of this parameter | |
| should be set to "false" | |
| --> | |
| <parameter name="synchronizeAll">true</parameter> | |
| <!-- | |
| The maximum number of times we need to retry to send a message to a particular node | |
| before giving up and considering that node to be faulty | |
| --> | |
| <parameter name="maxRetries">10</parameter> | |
| <!-- The multicast address to be used --> | |
| <parameter name="mcastAddress">228.0.0.4</parameter> | |
| <!-- The multicast port to be used --> | |
| <parameter name="mcastPort">45564</parameter> | |
| <!-- The frequency of sending membership multicast messages (in ms) --> | |
| <parameter name="mcastFrequency">500</parameter> | |
| <!-- The time interval within which if a member does not respond, the member will be | |
| deemed to have left the group (in ms) | |
| --> | |
| <parameter name="memberDropTime">3000</parameter> | |
| <!-- | |
| The IP address of the network interface to which the multicasting has to be bound to. | |
| Multicasting would be done using this interface. | |
| --> | |
| <parameter name="mcastBindAddress">127.0.0.1</parameter> | |
| <!-- The host name or IP address of this member --> | |
| <parameter name="localMemberHost">127.0.0.1</parameter> | |
| <!-- | |
| The TCP port used by this member. This is the port through which other nodes will | |
| contact this member | |
| --> | |
| <parameter name="localMemberPort">4000</parameter> | |
| <!-- | |
| Preserve message ordering. This will be done according to sender order. | |
| --> | |
| <parameter name="preserveMessageOrder">true</parameter> | |
| <!-- | |
| Maintain atmost-once message processing semantics | |
| --> | |
| <parameter name="atmostOnceMessageSemantics">true</parameter> | |
| <!-- | |
| The list of static or well-known members. These entries will only be valid if the | |
| "membershipScheme" above is set to "wka" | |
| --> | |
| <members> | |
| <member> | |
| <hostName>127.0.0.1</hostName> | |
| <port>4000</port> | |
| </member> | |
| <member> | |
| <hostName>127.0.0.1</hostName> | |
| <port>4001</port> | |
| </member> | |
| </members> | |
| <!-- | |
| Enable the load balancer entry if you need to run this node as a load balancer. | |
| Multiple application domains with different LoadBalanceEventHandler implementations | |
| can be defined in this section. | |
| --> | |
| <loadBalancer enable="false"> | |
| <applicationDomain name="apache.axis2.application.domain" | |
| handler="org.apache.axis2.clustering.DefaultLoadBalanceEventHandler"/> | |
| </loadBalancer> | |
| <!-- | |
| This interface is responsible for handling configuration management. | |
| Configuraion changes include: | |
| 1. Rebooting an entire cluster, in which case, all nodes have to load the new | |
| Axis2 configuration in a consistent manner | |
| 2. Deploying a new service to a cluster or undeploying a service from a cluster | |
| 3. Changing the policies of a service deployed on the cluster | |
| The "enable" attribute indicates whether Configuration management has been enabled | |
| --> | |
| <configurationManager | |
| class="org.apache.axis2.clustering.configuration.DefaultConfigurationManager" | |
| enable="true"> | |
| <listener | |
| class="org.apache.axis2.clustering.configuration.DefaultConfigurationManagerListener"/> | |
| </configurationManager> | |
| <!-- | |
| This interface is responsible for handling context replication. The property changes in | |
| the Axis2 context hierarchy in this node, are propagated to all other nodes in the cluster. | |
| The "excludes" patterns can be used to specify the prefixes (e.g. local_*) or | |
| suffixes (e.g. *_local) of the properties to be excluded from replication. The pattern | |
| "*" indicates that all properties in a particular context should not be replicated. | |
| The "enable" attribute indicates whether context replication has been enabled | |
| --> | |
| <contextManager class="org.apache.axis2.clustering.context.DefaultContextManager" | |
| enable="true"> | |
| <listener class="org.apache.axis2.clustering.context.DefaultContextManagerListener"/> | |
| <replication> | |
| <defaults> | |
| <exclude name="local_*"/> | |
| <exclude name="LOCAL_*"/> | |
| </defaults> | |
| <context class="org.apache.axis2.context.ConfigurationContext"> | |
| <exclude name="UseAsyncOperations"/> | |
| <exclude name="SequencePropertyBeanMap"/> | |
| </context> | |
| <context class="org.apache.axis2.context.ServiceGroupContext"> | |
| <exclude name="my.sandesha.*"/> | |
| </context> | |
| <context class="org.apache.axis2.context.ServiceContext"> | |
| <exclude name="my.sandesha.*"/> | |
| </context> | |
| </replication> | |
| </contextManager> | |
| </cluster> | |
| <!-- ================================================= --> | |
| <!-- Phases --> | |
| <!-- ================================================= --> | |
| <phaseOrder type="InFlow"> | |
| <!-- System predefined phases --> | |
| <phase name="Transport"> | |
| <handler name="RequestURIBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"> | |
| <order phase="Transport"/> | |
| </handler> | |
| <handler name="SOAPActionBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"> | |
| <order phase="Transport"/> | |
| </handler> | |
| </phase> | |
| <phase name="Addressing"> | |
| <handler name="AddressingBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> | |
| <order phase="Addressing"/> | |
| </handler> | |
| </phase> | |
| <!-- needs to be before the X509 cert is removed --> | |
| <phase name="ec2authentication"> | |
| <handler name="InFlowEC2Auth" | |
| class="com.cloud.bridge.auth.ec2.AuthenticationHandler"> | |
| <order phase="ec2authentication"/> | |
| </handler> | |
| </phase> | |
| <phase name="Security"/> | |
| <phase name="PreDispatch"/> | |
| <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> | |
| <handler name="RequestURIBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> | |
| <handler name="SOAPActionBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> | |
| <handler name="RequestURIOperationDispatcher" | |
| class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> | |
| <handler name="SOAPMessageBodyBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> | |
| <handler name="HTTPLocationBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> | |
| <handler name="GenericProviderDispatcher" | |
| class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/> | |
| <handler name="MustUnderstandValidationDispatcher" | |
| class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/> | |
| </phase> | |
| <phase name="RMPhase"/> | |
| <!-- System predefined phases --> | |
| <!-- After Postdispatch phase module author or service author can add any phase he want --> | |
| <phase name="OperationInPhase"> | |
| <handler name="MustUnderstandChecker" | |
| class="org.apache.axis2.jaxws.dispatchers.MustUnderstandChecker"> | |
| <order phase="OperationInPhase"/> | |
| </handler> | |
| </phase> | |
| <phase name="s3authentication"> | |
| <handler name="InFlowS3Auth" | |
| class="com.cloud.bridge.auth.s3.AuthenticationHandler"> | |
| <order phase="s3authentication"/> | |
| </handler> | |
| </phase> | |
| <phase name="soapmonitorPhase"/> | |
| </phaseOrder> | |
| <phaseOrder type="OutFlow"> | |
| <!-- user can add his own phases to this area --> | |
| <phase name="soapmonitorPhase"/> | |
| <phase name="OperationOutPhase"/> | |
| <!--system predefined phase--> | |
| <!--these phase will run irrespective of the service--> | |
| <phase name="RMPhase"/> | |
| <phase name="PolicyDetermination"/> | |
| <phase name="MessageOut"/> | |
| <phase name="Security"/> | |
| </phaseOrder> | |
| <phaseOrder type="InFaultFlow"> | |
| <phase name="Addressing"> | |
| <handler name="AddressingBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> | |
| <order phase="Addressing"/> | |
| </handler> | |
| </phase> | |
| <phase name="Security"/> | |
| <phase name="PreDispatch"/> | |
| <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> | |
| <handler name="RequestURIBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> | |
| <handler name="SOAPActionBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> | |
| <handler name="RequestURIOperationDispatcher" | |
| class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> | |
| <handler name="SOAPMessageBodyBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> | |
| <handler name="HTTPLocationBasedDispatcher" | |
| class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> | |
| <handler name="GenericProviderDispatcher" | |
| class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/> | |
| <handler name="MustUnderstandValidationDispatcher" | |
| class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/> | |
| </phase> | |
| <phase name="RMPhase"/> | |
| <!-- user can add his own phases to this area --> | |
| <phase name="OperationInFaultPhase"/> | |
| <phase name="soapmonitorPhase"/> | |
| </phaseOrder> | |
| <phaseOrder type="OutFaultFlow"> | |
| <!-- user can add his own phases to this area --> | |
| <phase name="soapmonitorPhase"/> | |
| <phase name="OperationOutFaultPhase"/> | |
| <phase name="RMPhase"/> | |
| <phase name="PolicyDetermination"/> | |
| <phase name="MessageOut"/> | |
| <phase name="Security"/> | |
| </phaseOrder> | |
| </axisconfig> | |